test.models/piece_02.py

   1 # -*- coding: utf-8 -*-
   2 from salome.shaper import model
   3
   4 model.begin()
   5 partSet = model.moduleDocument()
   6 Part_1 = model.addPart(partSet)
   7 Part_1_doc = Part_1.document()
   8 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
   9 SketchLine_1 = Sketch_1.addLine(0, 4.99999999998656, 0, 40.99999999998656)
  10 SketchLine_2 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OZ"))
  11 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
  12 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.result())
  13 SketchLine_3 = Sketch_1.addLine(4.999999999986844, 0, 36.99999999998685, 0)
  14 SketchLine_4 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OX"))
  15 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchLine_4.result())
  16 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.result())
  17 SketchLine_5 = Sketch_1.addLine(4.999999999999999, 45.99999999998655, 37, 45.99999999998655)
  18 SketchLine_6 = Sketch_1.addLine(42, 40.99999999998655, 42, 4.999999999986548)
  19 SketchArc_1 = Sketch_1.addArc(5, 40.99999999998656, 0, 40.99999999998656, 4.999999999999999, 45.99999999998656, True)
  20 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchArc_1.startPoint())
  21 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchLine_1.result(), SketchArc_1.results()[1])
  22 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.result(), SketchArc_1.endPoint())
  23 SketchArc_2 = Sketch_1.addArc(37, 40.99999999998655, 37, 45.99999999998655, 42, 40.99999999998655, True)
  24 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchArc_2.startPoint())
  25 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchLine_5.result(), SketchArc_2.results()[1])
  26 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_6.result(), SketchArc_2.endPoint())
  27 SketchArc_3 = Sketch_1.addArc(4.999999999986827, 4.999999999986823, 0, 4.99999999998656, 4.999999999986844, 0, False)
  28 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchArc_3.startPoint())
  29 SketchConstraintTangent_3 = Sketch_1.setTangent(SketchLine_1.result(), SketchArc_3.results()[1])
  30 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_3.result(), SketchArc_3.endPoint())
  31 SketchArc_4 = Sketch_1.addArc(36.99999999998375, 5.000000000004257, 36.99999999998685, 0, 42, 4.999999999986548, False)
  32 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_4.startPoint())
  33 SketchConstraintTangent_4 = Sketch_1.setTangent(SketchLine_3.result(), SketchArc_4.results()[1])
  34 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_6.result(), SketchArc_4.endPoint())
  35 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_6.result())
  36 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_5.result())
  37 SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_5.result(), SketchLine_3.result())
  38 SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_6.result(), SketchLine_1.result())
  39 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_5.startPoint())
  40 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_6.startPoint())
  41 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchArc_4.endPoint())
  42 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchArc_3.endPoint(), SketchLine_3.startPoint())
  43 SketchConstraintTangent_5 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_6.result())
  44 SketchConstraintTangent_6 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_5.result())
  45 SketchConstraintTangent_7 = Sketch_1.setTangent(SketchArc_3.results()[1], SketchLine_3.result())
  46 SketchConstraintEqual_3 = Sketch_1.setEqual(SketchArc_1.results()[1], SketchArc_2.results()[1])
  47 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_2.results()[1], 5)
  48 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 36)
  49 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_5.result(), 32)
  50 SketchConstraintTangent_8 = Sketch_1.setTangent(SketchArc_4.results()[1], SketchLine_6.result())
  51 model.do()
  52 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_3f-SketchLine_5r-SketchLine_6r-SketchArc_1_2f-SketchArc_2_2f-SketchArc_3_2f-SketchArc_4_2f")], model.selection(), 76, 0)
  53 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face_1"))
  54 SketchLine_7 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/To_Face_1"))
  55 SketchLine_7.setName("SketchLine_8")
  56 SketchLine_7.result().setName("SketchLine_8")
  57 SketchLine_8 = Sketch_2.addLine(21, 45.99999999998655, 20.99999999998684, 0)
  58 SketchLine_8.setName("SketchLine_9")
  59 SketchLine_8.result().setName("SketchLine_9")
  60 SketchLine_8.setAuxiliary(True)
  61 SketchLine_9 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/To_Face_1"))
  62 SketchLine_9.setName("SketchLine_10")
  63 SketchLine_9.result().setName("SketchLine_10")
  64 SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_8.startPoint(), SketchLine_9.result())
  65 SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_18")
  66 SketchLine_10 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_1"))
  67 SketchLine_10.setName("SketchLine_11")
  68 SketchLine_10.result().setName("SketchLine_11")
  69 SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_10.result())
  70 SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_19")
  71 SketchConstraintMiddle_1 = Sketch_2.setMiddlePoint(SketchLine_8.startPoint(), SketchLine_9.result())
  72 SketchConstraintMiddle_2 = Sketch_2.setMiddlePoint(SketchLine_8.endPoint(), SketchLine_10.result())
  73 SketchLine_11 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1"))
  74 SketchLine_11.setName("SketchLine_12")
  75 SketchLine_11.result().setName("SketchLine_12")
  76 SketchPoint_1 = Sketch_2.addPoint(20.99999999999342, 22.99999999999327)
  77 SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchPoint_1.coordinates(), SketchLine_8.result())
  78 SketchConstraintCoincidence_19.setName("SketchConstraintCoincidence_20")
  79 SketchConstraintMiddle_3 = Sketch_2.setMiddlePoint(SketchPoint_1.coordinates(), SketchLine_8.result())
  80 SketchCircle_1 = Sketch_2.addCircle(20.99999999999342, 22.99999999999327, 19)
  81 SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchPoint_1.coordinates(), SketchCircle_1.center())
  82 SketchConstraintCoincidence_20.setName("SketchConstraintCoincidence_21")
  83 SketchConstraintRadius_2 = Sketch_2.setRadius(SketchCircle_1.results()[1], 19)
  84 SketchCircle_2 = Sketch_2.addCircle(12.99999999999342, 22.99999999998655, 2.5)
  85 SketchCircle_3 = Sketch_2.addCircle(28.99999999999342, 22.99999999998655, 2.5)
  86 SketchCircle_4 = Sketch_2.addCircle(20.99999999999113, 14.99999999998655, 2.5)
  87 SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchLine_8.result(), SketchCircle_4.center())
  88 SketchConstraintCoincidence_21.setName("SketchConstraintCoincidence_22")
  89 SketchConstraintEqual_4 = Sketch_2.setEqual(SketchCircle_2.results()[1], SketchCircle_3.results()[1])
  90 SketchConstraintEqual_5 = Sketch_2.setEqual(SketchCircle_3.results()[1], SketchCircle_4.results()[1])
  91 SketchLine_12 = Sketch_2.addLine(2.465190328815662e-32, 22.99999999998655, 41.99999999999999, 22.99999999998655)
  92 SketchLine_12.setName("SketchLine_13")
  93 SketchLine_12.result().setName("SketchLine_13")
  94 SketchLine_12.setAuxiliary(True)
  95 SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchLine_12.startPoint(), SketchLine_7.result())
  96 SketchConstraintCoincidence_22.setName("SketchConstraintCoincidence_23")
  97 SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_11.result())
  98 SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_24")
  99 SketchConstraintHorizontal_2 = Sketch_2.setHorizontal(SketchLine_12.result())
 100 SketchConstraintDistance_1 = Sketch_2.setDistance(SketchCircle_2.center(), SketchCircle_3.center(), 16)
 101 SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchCircle_2.center(), SketchLine_12.result())
 102 SketchConstraintCoincidence_24.setName("SketchConstraintCoincidence_25")
 103 SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchCircle_3.center(), SketchLine_12.result())
 104 SketchConstraintCoincidence_25.setName("SketchConstraintCoincidence_26")
 105 SketchConstraintDistance_2 = Sketch_2.setDistance(SketchCircle_2.center(), SketchLine_8.result(), 8)
 106 SketchConstraintMiddle_4 = Sketch_2.setMiddlePoint(SketchLine_12.endPoint(), SketchLine_11.result())
 107 SketchConstraintRadius_3 = Sketch_2.setRadius(SketchCircle_2.results()[1], 2.5)
 108 SketchConstraintDistance_3 = Sketch_2.setDistance(SketchLine_12.result(), SketchCircle_4.center(), 8)
 109 model.do()
 110 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_1_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchCircle_2_2r"), model.selection("WIRE", "Sketch_2/Wire-SketchCircle_3_2f")], model.selection(), 0, 15, [model.selection("SOLID", "Extrusion_1_1")])
 111 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_4_2f")], model.selection(), model.selection("FACE", "Extrusion_1_1/From_Face_1"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
 112 Sketch_3 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
 113 SketchCircle_5 = Sketch_3.addCircle(20.99999999999342, 22.99999999999327, 19)
 114 SketchConstraintRadius_4 = Sketch_3.setRadius(SketchCircle_5.results()[1], 19)
 115 SketchLine_13 = Sketch_3.addLine(41.99999999999999, 22.99999999998655, 0, 22.99999999998656)
 116 SketchLine_13.setName("SketchLine_14")
 117 SketchLine_13.result().setName("SketchLine_14")
 118 SketchLine_13.setAuxiliary(True)
 119 SketchLine_14 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&Extrusion_1_1/Generated_Face_3"))
 120 SketchLine_14.setName("SketchLine_15")
 121 SketchLine_14.result().setName("SketchLine_15")
 122 SketchConstraintCoincidence_26 = Sketch_3.setCoincident(SketchLine_13.startPoint(), SketchLine_14.result())
 123 SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_27")
 124 SketchLine_15 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&ExtrusionCut_2_1/Modfied_2"))
 125 SketchLine_15.setName("SketchLine_16")
 126 SketchLine_15.result().setName("SketchLine_16")
 127 SketchConstraintCoincidence_27 = Sketch_3.setCoincident(SketchLine_13.endPoint(), SketchLine_15.result())
 128 SketchConstraintCoincidence_27.setName("SketchConstraintCoincidence_28")
 129 SketchLine_16 = Sketch_3.addLine(21, 45.99999999998655, 20.99999999998684, 0)
 130 SketchLine_16.setName("SketchLine_17")
 131 SketchLine_16.result().setName("SketchLine_17")
 132 SketchLine_16.setAuxiliary(True)
 133 SketchLine_17 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&Extrusion_1_1/Generated_Face_5"))
 134 SketchLine_17.setName("SketchLine_18")
 135 SketchLine_17.result().setName("SketchLine_18")
 136 SketchConstraintCoincidence_28 = Sketch_3.setCoincident(SketchLine_16.startPoint(), SketchLine_17.result())
 137 SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_29")
 138 SketchLine_18 = Sketch_3.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLine_3"))
 139 SketchLine_18.setName("SketchLine_19")
 140 SketchLine_18.result().setName("SketchLine_19")
 141 SketchConstraintCoincidence_29 = Sketch_3.setCoincident(SketchLine_16.endPoint(), SketchLine_18.result())
 142 SketchConstraintCoincidence_29.setName("SketchConstraintCoincidence_30")
 143 SketchConstraintMiddle_5 = Sketch_3.setMiddlePoint(SketchLine_16.startPoint(), SketchLine_17.result())
 144 SketchConstraintMiddle_6 = Sketch_3.setMiddlePoint(SketchLine_16.endPoint(), SketchLine_18.result())
 145 SketchConstraintMiddle_7 = Sketch_3.setMiddlePoint(SketchLine_13.endPoint(), SketchLine_15.result())
 146 SketchConstraintMiddle_8 = Sketch_3.setMiddlePoint(SketchLine_13.startPoint(), SketchLine_14.result())
 147 SketchPoint_2 = Sketch_3.addPoint(20.99999999999342, 22.99999999999327)
 148 SketchConstraintCoincidence_30 = Sketch_3.setCoincident(SketchPoint_2.coordinates(), SketchLine_16.result())
 149 SketchConstraintCoincidence_30.setName("SketchConstraintCoincidence_31")
 150 SketchConstraintMiddle_9 = Sketch_3.setMiddlePoint(SketchLine_16.result(), SketchPoint_2.coordinates())
 151 SketchConstraintCoincidence_31 = Sketch_3.setCoincident(SketchCircle_5.center(), SketchPoint_2.coordinates())
 152 SketchConstraintCoincidence_31.setName("SketchConstraintCoincidence_32")
 153 SketchCircle_6 = Sketch_3.addCircle(28.99999999999342, 22.99999999998655, 2.5)
 154 SketchConstraintCoincidence_32 = Sketch_3.setCoincident(SketchLine_13.result(), SketchCircle_6.center())
 155 SketchConstraintCoincidence_32.setName("SketchConstraintCoincidence_33")
 156 SketchCircle_7 = Sketch_3.addCircle(12.99999999999342, 22.99999999998656, 2.5)
 157 SketchConstraintCoincidence_33 = Sketch_3.setCoincident(SketchLine_13.result(), SketchCircle_7.center())
 158 SketchConstraintCoincidence_33.setName("SketchConstraintCoincidence_34")
 159 SketchConstraintEqual_6 = Sketch_3.setEqual(SketchCircle_7.results()[1], SketchCircle_6.results()[1])
 160 SketchConstraintRadius_5 = Sketch_3.setRadius(SketchCircle_7.results()[1], 2.5)
 161 SketchConstraintDistance_4 = Sketch_3.setDistance(SketchCircle_6.center(), SketchCircle_7.center(), 16)
 162 SketchConstraintDistance_5 = Sketch_3.setDistance(SketchCircle_6.center(), SketchLine_16.result(), 8)
 163 model.do()
 164 ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_5_2f-SketchCircle_6_2r-SketchCircle_7_2r")], model.selection(), 15, 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
 165 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_5"))
 166 SketchProjection_1 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"))
 167 SketchLine_19 = SketchProjection_1.createdFeature()
 168 SketchLine_19.setName("SketchLine_20")
 169 SketchLine_19.result().setName("SketchLine_20")
 170 SketchProjection_2 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_4"))
 171 SketchLine_20 = SketchProjection_2.createdFeature()
 172 SketchLine_20.setName("SketchLine_21")
 173 SketchLine_20.result().setName("SketchLine_21")
 174 SketchLine_21 = Sketch_4.addLine(4.999999999999999, -28, 37, -28)
 175 SketchLine_21.setName("SketchLine_22")
 176 SketchLine_21.result().setName("SketchLine_22")
 177 SketchLine_22 = Sketch_4.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/Generated_Face_5"))
 178 SketchLine_22.setName("SketchLine_23")
 179 SketchLine_22.result().setName("SketchLine_23")
 180 SketchConstraintCoincidence_34 = Sketch_4.setCoincident(SketchLine_21.startPoint(), SketchLine_22.result())
 181 SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_35")
 182 SketchLine_23 = Sketch_4.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/Generated_Face_4"))
 183 SketchLine_23.setName("SketchLine_24")
 184 SketchLine_23.result().setName("SketchLine_24")
 185 SketchConstraintCoincidence_35 = Sketch_4.setCoincident(SketchLine_21.endPoint(), SketchLine_23.result())
 186 SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_36")
 187 SketchLine_24 = Sketch_4.addLine(4.999999999999999, -48, 37, -48)
 188 SketchLine_24.setName("SketchLine_25")
 189 SketchLine_24.result().setName("SketchLine_25")
 190 SketchConstraintCoincidence_36 = Sketch_4.setCoincident(SketchLine_24.startPoint(), SketchLine_22.result())
 191 SketchConstraintCoincidence_36.setName("SketchConstraintCoincidence_37")
 192 SketchConstraintCoincidence_37 = Sketch_4.setCoincident(SketchLine_24.endPoint(), SketchLine_23.result())
 193 SketchConstraintCoincidence_37.setName("SketchConstraintCoincidence_38")
 194 SketchConstraintHorizontal_3 = Sketch_4.setHorizontal(SketchLine_21.result())
 195 SketchConstraintHorizontal_4 = Sketch_4.setHorizontal(SketchLine_24.result())
 196 SketchLine_25 = Sketch_4.addLine(3.593262427359596e-30, -33, 0, -43)
 197 SketchLine_25.setName("SketchLine_26")
 198 SketchLine_25.result().setName("SketchLine_26")
 199 SketchConstraintCoincidence_38 = Sketch_4.setCoincident(SketchLine_25.startPoint(), SketchLine_19.result())
 200 SketchConstraintCoincidence_38.setName("SketchConstraintCoincidence_39")
 201 SketchConstraintCoincidence_39 = Sketch_4.setCoincident(SketchLine_25.endPoint(), SketchLine_19.result())
 202 SketchConstraintCoincidence_39.setName("SketchConstraintCoincidence_40")
 203 SketchLine_26 = Sketch_4.addLine(42, -33, 42, -43)
 204 SketchLine_26.setName("SketchLine_27")
 205 SketchLine_26.result().setName("SketchLine_27")
 206 SketchConstraintCoincidence_40 = Sketch_4.setCoincident(SketchLine_26.startPoint(), SketchLine_20.result())
 207 SketchConstraintCoincidence_40.setName("SketchConstraintCoincidence_41")
 208 SketchConstraintCoincidence_41 = Sketch_4.setCoincident(SketchLine_26.endPoint(), SketchLine_20.result())
 209 SketchConstraintCoincidence_41.setName("SketchConstraintCoincidence_42")
 210 SketchArc_5 = Sketch_4.addArc(5, -33, 3.593262427359596e-30, -33, 4.999999999999999, -28, True)
 211 SketchConstraintCoincidence_42 = Sketch_4.setCoincident(SketchLine_25.startPoint(), SketchArc_5.startPoint())
 212 SketchConstraintCoincidence_42.setName("SketchConstraintCoincidence_43")
 213 SketchConstraintTangent_9 = Sketch_4.setTangent(SketchLine_25.result(), SketchArc_5.results()[1])
 214 SketchArc_6 = Sketch_4.addArc(5, -43, 0, -43, 4.999999999999999, -48, False)
 215 SketchConstraintCoincidence_43 = Sketch_4.setCoincident(SketchLine_25.endPoint(), SketchArc_6.startPoint())
 216 SketchConstraintCoincidence_43.setName("SketchConstraintCoincidence_44")
 217 SketchConstraintTangent_10 = Sketch_4.setTangent(SketchLine_25.result(), SketchArc_6.results()[1])
 218 SketchArc_7 = Sketch_4.addArc(37, -33, 37, -28, 42, -33, True)
 219 SketchConstraintCoincidence_44 = Sketch_4.setCoincident(SketchLine_21.endPoint(), SketchArc_7.startPoint())
 220 SketchConstraintCoincidence_44.setName("SketchConstraintCoincidence_45")
 221 SketchConstraintTangent_11 = Sketch_4.setTangent(SketchLine_21.result(), SketchArc_7.results()[1])
 222 SketchArc_8 = Sketch_4.addArc(37, -43, 37, -48, 42, -43, False)
 223 SketchConstraintCoincidence_45 = Sketch_4.setCoincident(SketchLine_24.endPoint(), SketchArc_8.startPoint())
 224 SketchConstraintCoincidence_45.setName("SketchConstraintCoincidence_46")
 225 SketchConstraintTangent_12 = Sketch_4.setTangent(SketchLine_24.result(), SketchArc_8.results()[1])
 226 SketchConstraintDistance_6 = Sketch_4.setDistance(SketchLine_21.startPoint(), SketchLine_24.startPoint(), 20)
 227 SketchConstraintEqual_7 = Sketch_4.setEqual(SketchLine_26.result(), SketchLine_25.result())
 228 SketchConstraintCoincidence_46 = Sketch_4.setCoincident(SketchArc_5.endPoint(), SketchLine_21.startPoint())
 229 SketchConstraintCoincidence_46.setName("SketchConstraintCoincidence_47")
 230 SketchConstraintCoincidence_47 = Sketch_4.setCoincident(SketchLine_26.startPoint(), SketchArc_7.endPoint())
 231 SketchConstraintCoincidence_47.setName("SketchConstraintCoincidence_48")
 232 SketchConstraintCoincidence_48 = Sketch_4.setCoincident(SketchLine_26.endPoint(), SketchArc_8.endPoint())
 233 SketchConstraintCoincidence_48.setName("SketchConstraintCoincidence_49")
 234 SketchConstraintCoincidence_49 = Sketch_4.setCoincident(SketchLine_24.startPoint(), SketchArc_6.endPoint())
 235 SketchConstraintCoincidence_49.setName("SketchConstraintCoincidence_50")
 236 SketchConstraintTangent_13 = Sketch_4.setTangent(SketchArc_5.results()[1], SketchLine_21.result())
 237 SketchConstraintTangent_14 = Sketch_4.setTangent(SketchArc_7.results()[1], SketchLine_26.result())
 238 SketchConstraintTangent_15 = Sketch_4.setTangent(SketchArc_8.results()[1], SketchLine_26.result())
 239 SketchLine_27 = Sketch_4.addLine(0, -38, 42, -38)
 240 SketchLine_27.setName("SketchLine_28")
 241 SketchLine_27.result().setName("SketchLine_28")
 242 SketchLine_27.setAuxiliary(True)
 243 SketchConstraintCoincidence_50 = Sketch_4.setCoincident(SketchLine_27.startPoint(), SketchLine_19.result())
 244 SketchConstraintCoincidence_50.setName("SketchConstraintCoincidence_51")
 245 SketchConstraintCoincidence_51 = Sketch_4.setCoincident(SketchLine_27.endPoint(), SketchLine_20.result())
 246 SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_52")
 247 SketchConstraintMiddle_10 = Sketch_4.setMiddlePoint(SketchLine_27.endPoint(), SketchLine_20.result())
 248 SketchConstraintMiddle_11 = Sketch_4.setMiddlePoint(SketchLine_27.startPoint(), SketchLine_19.result())
 249 SketchConstraintMiddle_12 = Sketch_4.setMiddlePoint(SketchLine_25.result(), SketchLine_27.startPoint())
 250 model.do()
 251 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchLine_22r-SketchLine_25f-SketchLine_26f-SketchLine_27r-SketchArc_5_2f-SketchArc_6_2f-SketchArc_7_2f-SketchArc_8_2f")], model.selection(), 2, 17)
 252 Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/To_Face_1"))
 253 SketchLine_28 = Sketch_5.addLine(5.000000000000001, -46, 37.00000000000001, -46)
 254 SketchLine_28.setName("SketchLine_29")
 255 SketchLine_28.result().setName("SketchLine_29")
 256 SketchLine_29 = Sketch_5.addLine(5, -30, 37.00000000000001, -30)
 257 SketchLine_29.setName("SketchLine_30")
 258 SketchLine_29.result().setName("SketchLine_30")
 259 SketchLine_30 = Sketch_5.addLine(2, -43, 2, -33)
 260 SketchLine_30.setName("SketchLine_31")
 261 SketchLine_30.result().setName("SketchLine_31")
 262 SketchLine_31 = Sketch_5.addLine(40.00000000000001, -33, 40.00000000000001, -43)
 263 SketchLine_31.setName("SketchLine_32")
 264 SketchLine_31.result().setName("SketchLine_32")
 265 SketchConstraintHorizontal_5 = Sketch_5.setHorizontal(SketchLine_29.result())
 266 SketchConstraintHorizontal_6 = Sketch_5.setHorizontal(SketchLine_28.result())
 267 SketchConstraintVertical_2 = Sketch_5.setVertical(SketchLine_30.result())
 268 SketchConstraintVertical_3 = Sketch_5.setVertical(SketchLine_31.result())
 269 SketchConstraintEqual_8 = Sketch_5.setEqual(SketchLine_29.result(), SketchLine_28.result())
 270 SketchConstraintEqual_9 = Sketch_5.setEqual(SketchLine_31.result(), SketchLine_30.result())
 271 SketchLine_32 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_1&Extrusion_2_1/To_Face_1"))
 272 SketchLine_32.setName("SketchLine_33")
 273 SketchLine_32.result().setName("SketchLine_33")
 274 SketchConstraintDistance_7 = Sketch_5.setDistance(SketchLine_30.endPoint(), SketchLine_32.result(), 2)
 275 SketchLine_33 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_5&Extrusion_2_1/To_Face_1"))
 276 SketchLine_33.setName("SketchLine_34")
 277 SketchLine_33.result().setName("SketchLine_34")
 278 SketchConstraintDistance_8 = Sketch_5.setDistance(SketchLine_31.startPoint(), SketchLine_33.result(), 2)
 279 SketchLine_34 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_7&Extrusion_2_1/To_Face_1"))
 280 SketchLine_34.setName("SketchLine_35")
 281 SketchLine_34.result().setName("SketchLine_35")
 282 SketchConstraintDistance_9 = Sketch_5.setDistance(SketchLine_29.startPoint(), SketchLine_34.result(), 2)
 283 SketchLine_35 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_3&Extrusion_2_1/To_Face_1"))
 284 SketchLine_35.setName("SketchLine_36")
 285 SketchLine_35.result().setName("SketchLine_36")
 286 SketchConstraintDistance_10 = Sketch_5.setDistance(SketchLine_28.startPoint(), SketchLine_35.result(), 2)
 287 SketchArc_9 = Sketch_5.addArc(5, -33, 2, -33, 5, -30, True)
 288 SketchConstraintCoincidence_52 = Sketch_5.setCoincident(SketchLine_30.endPoint(), SketchArc_9.startPoint())
 289 SketchConstraintCoincidence_52.setName("SketchConstraintCoincidence_53")
 290 SketchConstraintTangent_16 = Sketch_5.setTangent(SketchLine_30.result(), SketchArc_9.results()[1])
 291 SketchArc_10 = Sketch_5.addArc(5, -43, 2, -43, 5.000000000000001, -46, False)
 292 SketchConstraintCoincidence_53 = Sketch_5.setCoincident(SketchLine_30.startPoint(), SketchArc_10.startPoint())
 293 SketchConstraintCoincidence_53.setName("SketchConstraintCoincidence_54")
 294 SketchConstraintTangent_17 = Sketch_5.setTangent(SketchLine_30.result(), SketchArc_10.results()[1])
 295 SketchArc_11 = Sketch_5.addArc(37.00000000000001, -33, 37.00000000000001, -30, 40.00000000000001, -33, True)
 296 SketchConstraintCoincidence_54 = Sketch_5.setCoincident(SketchLine_29.endPoint(), SketchArc_11.startPoint())
 297 SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_55")
 298 SketchConstraintTangent_18 = Sketch_5.setTangent(SketchLine_29.result(), SketchArc_11.results()[1])
 299 SketchArc_12 = Sketch_5.addArc(37.00000000000001, -43, 37.00000000000001, -46, 40.00000000000001, -43, False)
 300 SketchConstraintCoincidence_55 = Sketch_5.setCoincident(SketchLine_28.endPoint(), SketchArc_12.startPoint())
 301 SketchConstraintCoincidence_55.setName("SketchConstraintCoincidence_56")
 302 SketchConstraintTangent_19 = Sketch_5.setTangent(SketchLine_28.result(), SketchArc_12.results()[1])
 303 SketchConstraintCoincidence_56 = Sketch_5.setCoincident(SketchArc_9.endPoint(), SketchLine_29.startPoint())
 304 SketchConstraintCoincidence_56.setName("SketchConstraintCoincidence_57")
 305 SketchConstraintCoincidence_57 = Sketch_5.setCoincident(SketchArc_11.endPoint(), SketchLine_31.startPoint())
 306 SketchConstraintCoincidence_57.setName("SketchConstraintCoincidence_58")
 307 SketchConstraintCoincidence_58 = Sketch_5.setCoincident(SketchLine_31.endPoint(), SketchArc_12.endPoint())
 308 SketchConstraintCoincidence_58.setName("SketchConstraintCoincidence_59")
 309 SketchConstraintCoincidence_59 = Sketch_5.setCoincident(SketchArc_10.endPoint(), SketchLine_28.startPoint())
 310 SketchConstraintCoincidence_59.setName("SketchConstraintCoincidence_60")
 311 SketchConstraintEqual_10 = Sketch_5.setEqual(SketchArc_11.results()[1], SketchArc_9.results()[1])
 312 SketchConstraintEqual_11 = Sketch_5.setEqual(SketchArc_10.results()[1], SketchArc_12.results()[1])
 313 SketchConstraintEqual_12 = Sketch_5.setEqual(SketchArc_12.results()[1], SketchArc_11.results()[1])
 314 SketchConstraintTangent_20 = Sketch_5.setTangent(SketchArc_9.results()[1], SketchLine_29.result())
 315 SketchConstraintTangent_21 = Sketch_5.setTangent(SketchArc_12.results()[1], SketchLine_31.result())
 316 SketchConstraintRadius_6 = Sketch_5.setRadius(SketchArc_9.results()[1], 3)
 317 SketchLine_36 = Sketch_5.addLine(2, -38, 39.99999999999998, -38)
 318 SketchLine_36.setName("SketchLine_37")
 319 SketchLine_36.result().setName("SketchLine_37")
 320 SketchLine_36.setAuxiliary(True)
 321 SketchConstraintCoincidence_60 = Sketch_5.setCoincident(SketchLine_36.startPoint(), SketchLine_30.result())
 322 SketchConstraintCoincidence_60.setName("SketchConstraintCoincidence_61")
 323 SketchConstraintCoincidence_61 = Sketch_5.setCoincident(SketchLine_36.endPoint(), SketchLine_31.result())
 324 SketchConstraintCoincidence_61.setName("SketchConstraintCoincidence_62")
 325 SketchConstraintMiddle_13 = Sketch_5.setMiddlePoint(SketchLine_31.result(), SketchLine_36.endPoint())
 326 SketchConstraintMiddle_14 = Sketch_5.setMiddlePoint(SketchLine_36.startPoint(), SketchLine_30.result())
 327 SketchCircle_8 = Sketch_5.addCircle(13.00000000000001, -38, 2.5)
 328 SketchConstraintCoincidence_62 = Sketch_5.setCoincident(SketchLine_36.result(), SketchCircle_8.center())
 329 SketchConstraintCoincidence_62.setName("SketchConstraintCoincidence_63")
 330 SketchCircle_9 = Sketch_5.addCircle(29, -38, 2.5)
 331 SketchConstraintCoincidence_63 = Sketch_5.setCoincident(SketchLine_36.result(), SketchCircle_9.center())
 332 SketchConstraintCoincidence_63.setName("SketchConstraintCoincidence_64")
 333 SketchConstraintEqual_13 = Sketch_5.setEqual(SketchCircle_9.results()[1], SketchCircle_8.results()[1])
 334 SketchConstraintRadius_7 = Sketch_5.setRadius(SketchCircle_9.results()[1], 2.5)
 335 SketchConstraintDistance_11 = Sketch_5.setDistance(SketchCircle_8.center(), SketchCircle_9.center(), 16)
 336 SketchLine_37 = Sketch_5.addLine(21, -28, 21, -48)
 337 SketchLine_37.setName("SketchLine_38")
 338 SketchLine_37.result().setName("SketchLine_38")
 339 SketchLine_37.setAuxiliary(True)
 340 SketchConstraintCoincidence_64 = Sketch_5.setCoincident(SketchLine_37.startPoint(), SketchLine_34.result())
 341 SketchConstraintCoincidence_64.setName("SketchConstraintCoincidence_65")
 342 SketchConstraintCoincidence_65 = Sketch_5.setCoincident(SketchLine_37.endPoint(), SketchLine_35.result())
 343 SketchConstraintCoincidence_65.setName("SketchConstraintCoincidence_66")
 344 SketchConstraintMiddle_15 = Sketch_5.setMiddlePoint(SketchLine_37.startPoint(), SketchLine_34.result())
 345 SketchConstraintMiddle_16 = Sketch_5.setMiddlePoint(SketchLine_37.endPoint(), SketchLine_35.result())
 346 SketchConstraintDistance_12 = Sketch_5.setDistance(SketchCircle_8.center(), SketchLine_37.result(), 8)
 347 model.do()
 348 ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_5/Wire-SketchLine_29f-SketchLine_30r-SketchLine_31r-SketchLine_32r-SketchArc_9_2f-SketchArc_10_2f-SketchArc_11_2f-SketchArc_12_2f")], model.selection(), 0, 15, [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "ExtrusionCut_3_1")])
 349 ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchCircle_8_2f"), model.selection("FACE", "Sketch_5/Face-SketchCircle_9_2f")], model.selection(), 0, 20, [model.selection("SOLID", "ExtrusionCut_4_1"), model.selection("SOLID", "ExtrusionCut_4_2")])
 350 Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/YOZ"))
 351 SketchLine_38 = Sketch_6.addLine(-59, 44, -59, 2)
 352 SketchLine_38.setName("SketchLine_39")
 353 SketchLine_38.result().setName("SketchLine_39")
 354 SketchLine_39 = Sketch_6.addLine(-59, 2, -17, 2)
 355 SketchLine_39.setName("SketchLine_40")
 356 SketchLine_39.result().setName("SketchLine_40")
 357 SketchConstraintCoincidence_66 = Sketch_6.setCoincident(SketchLine_38.endPoint(), SketchLine_39.startPoint())
 358 SketchConstraintCoincidence_66.setName("SketchConstraintCoincidence_67")
 359 SketchLine_40 = Sketch_6.addLine(-17, 2, -16.99997429885428, 44)
 360 SketchLine_40.setName("SketchLine_41")
 361 SketchLine_40.result().setName("SketchLine_41")
 362 SketchConstraintCoincidence_67 = Sketch_6.setCoincident(SketchLine_39.endPoint(), SketchLine_40.startPoint())
 363 SketchConstraintCoincidence_67.setName("SketchConstraintCoincidence_68")
 364 SketchLine_41 = Sketch_6.addLine(-16.99997429885428, 44, -27.99998714942714, 44)
 365 SketchLine_41.setName("SketchLine_42")
 366 SketchLine_41.result().setName("SketchLine_42")
 367 SketchConstraintCoincidence_68 = Sketch_6.setCoincident(SketchLine_40.endPoint(), SketchLine_41.startPoint())
 368 SketchConstraintCoincidence_68.setName("SketchConstraintCoincidence_69")
 369 SketchLine_42 = Sketch_6.addLine(-27.99998714942714, 44, -27.99998714942714, 29)
 370 SketchLine_42.setName("SketchLine_43")
 371 SketchLine_42.result().setName("SketchLine_43")
 372 SketchConstraintCoincidence_69 = Sketch_6.setCoincident(SketchLine_41.endPoint(), SketchLine_42.startPoint())
 373 SketchConstraintCoincidence_69.setName("SketchConstraintCoincidence_70")
 374 SketchLine_43 = Sketch_6.addLine(-27.99998714942714, 29, -47.99998714942714, 29)
 375 SketchLine_43.setName("SketchLine_44")
 376 SketchLine_43.result().setName("SketchLine_44")
 377 SketchConstraintCoincidence_70 = Sketch_6.setCoincident(SketchLine_42.endPoint(), SketchLine_43.startPoint())
 378 SketchConstraintCoincidence_70.setName("SketchConstraintCoincidence_71")
 379 SketchLine_44 = Sketch_6.addLine(-47.99998714942714, 29, -47.99998714942714, 44)
 380 SketchLine_44.setName("SketchLine_45")
 381 SketchLine_44.result().setName("SketchLine_45")
 382 SketchConstraintCoincidence_71 = Sketch_6.setCoincident(SketchLine_43.endPoint(), SketchLine_44.startPoint())
 383 SketchConstraintCoincidence_71.setName("SketchConstraintCoincidence_72")
 384 SketchLine_45 = Sketch_6.addLine(-47.99998714942714, 44, -59, 44)
 385 SketchLine_45.setName("SketchLine_46")
 386 SketchLine_45.result().setName("SketchLine_46")
 387 SketchConstraintCoincidence_72 = Sketch_6.setCoincident(SketchLine_44.endPoint(), SketchLine_45.startPoint())
 388 SketchConstraintCoincidence_72.setName("SketchConstraintCoincidence_73")
 389 SketchConstraintCoincidence_73 = Sketch_6.setCoincident(SketchLine_38.startPoint(), SketchLine_45.endPoint())
 390 SketchConstraintCoincidence_73.setName("SketchConstraintCoincidence_74")
 391 SketchConstraintEqual_14 = Sketch_6.setEqual(SketchLine_38.result(), SketchLine_40.result())
 392 SketchConstraintEqual_15 = Sketch_6.setEqual(SketchLine_41.result(), SketchLine_45.result())
 393 SketchConstraintEqual_16 = Sketch_6.setEqual(SketchLine_42.result(), SketchLine_44.result())
 394 SketchConstraintHorizontal_7 = Sketch_6.setHorizontal(SketchLine_45.result())
 395 SketchConstraintHorizontal_8 = Sketch_6.setHorizontal(SketchLine_43.result())
 396 SketchConstraintHorizontal_9 = Sketch_6.setHorizontal(SketchLine_39.result())
 397 SketchConstraintHorizontal_10 = Sketch_6.setHorizontal(SketchLine_41.result())
 398 SketchConstraintVertical_4 = Sketch_6.setVertical(SketchLine_38.result())
 399 SketchConstraintVertical_5 = Sketch_6.setVertical(SketchLine_44.result())
 400 SketchConstraintVertical_6 = Sketch_6.setVertical(SketchLine_42.result())
 401 SketchConstraintLength_3 = Sketch_6.setLength(SketchLine_38.result(), 42)
 402 SketchConstraintLength_4 = Sketch_6.setLength(SketchLine_43.result(), 20)
 403 SketchConstraintLength_5 = Sketch_6.setLength(SketchLine_44.result(), 15)
 404 SketchConstraintLength_6 = Sketch_6.setLength(SketchLine_39.result(), 42)
 405 SketchProjection_3 = Sketch_6.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/Generated_Face_2"))
 406 SketchLine_46 = SketchProjection_3.createdFeature()
 407 SketchLine_46.setName("SketchLine_47")
 408 SketchLine_46.result().setName("SketchLine_47")
 409 SketchProjection_4 = Sketch_6.addProjection(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_3&Extrusion_1_1/Generated_Face_3"))
 410 SketchLine_47 = SketchProjection_4.createdFeature()
 411 SketchLine_47.setName("SketchLine_48")
 412 SketchLine_47.result().setName("SketchLine_48")
 413 SketchProjection_5 = Sketch_6.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/Generated_Face_2"))
 414 SketchLine_48 = SketchProjection_5.createdFeature()
 415 SketchLine_48.setName("SketchLine_49")
 416 SketchLine_48.result().setName("SketchLine_49")
 417 SketchConstraintDistance_13 = Sketch_6.setDistance(SketchLine_38.endPoint(), SketchLine_46.result(), 2)
 418 SketchConstraintDistance_14 = Sketch_6.setDistance(SketchLine_38.startPoint(), SketchLine_47.result(), 17)
 419 model.do()
 420 ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_3"), -2, model.selection(), -2, [model.selection("SOLID", "ExtrusionCut_5_2")])
 421 Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_7"))
 422 SketchLine_49 = Sketch_7.addLine(0, -22.99999999998656, -76, -22.99999999998655)
 423 SketchLine_49.setName("SketchLine_50")
 424 SketchLine_49.result().setName("SketchLine_50")
 425 SketchLine_49.setAuxiliary(True)
 426 SketchLine_50 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&ExtrusionCut_3_1/Modfied_4"))
 427 SketchLine_50.setName("SketchLine_51")
 428 SketchLine_50.result().setName("SketchLine_51")
 429 SketchConstraintCoincidence_74 = Sketch_7.setCoincident(SketchLine_49.startPoint(), SketchLine_50.result())
 430 SketchConstraintCoincidence_74.setName("SketchConstraintCoincidence_75")
 431 SketchPoint_3 = Sketch_7.addPoint(model.selection("VERTEX", "Sketch_2/Vertex-SketchLine_13s"))
 432 SketchConstraintCoincidence_75 = Sketch_7.setCoincident(SketchLine_49.endPoint(), SketchPoint_3.result())
 433 SketchConstraintCoincidence_75.setName("SketchConstraintCoincidence_76")
 434 SketchConstraintMiddle_17 = Sketch_7.setMiddlePoint(SketchLine_49.startPoint(), SketchLine_50.result())
 435 SketchLine_51 = Sketch_7.addLine(-38, -40.99999999998656, -38, -4.99999999998656)
 436 SketchLine_51.setName("SketchLine_52")
 437 SketchLine_51.result().setName("SketchLine_52")
 438 SketchLine_51.setAuxiliary(True)
 439 SketchLine_52 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&ExtrusionCut_4_2/Modfied_4"))
 440 SketchLine_52.setName("SketchLine_53")
 441 SketchLine_52.result().setName("SketchLine_53")
 442 SketchConstraintCoincidence_76 = Sketch_7.setCoincident(SketchLine_51.startPoint(), SketchLine_52.result())
 443 SketchConstraintCoincidence_76.setName("SketchConstraintCoincidence_77")
 444 SketchLine_53 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_7"))
 445 SketchLine_53.setName("SketchLine_54")
 446 SketchLine_53.result().setName("SketchLine_54")
 447 SketchConstraintCoincidence_77 = Sketch_7.setCoincident(SketchLine_51.endPoint(), SketchLine_53.result())
 448 SketchConstraintCoincidence_77.setName("SketchConstraintCoincidence_78")
 449 SketchConstraintMiddle_18 = Sketch_7.setMiddlePoint(SketchLine_51.startPoint(), SketchLine_52.result())
 450 SketchConstraintMiddle_19 = Sketch_7.setMiddlePoint(SketchLine_51.endPoint(), SketchLine_53.result())
 451 SketchPoint_4 = Sketch_7.addPoint(-37.99999999999999, -22.99999999998656)
 452 SketchConstraintCoincidence_78 = Sketch_7.setCoincident(SketchPoint_4.coordinates(), SketchLine_51.result())
 453 SketchConstraintCoincidence_78.setName("SketchConstraintCoincidence_79")
 454 SketchConstraintMiddle_20 = Sketch_7.setMiddlePoint(SketchPoint_4.coordinates(), SketchLine_51.result())
 455 SketchCircle_10 = Sketch_7.addCircle(-37.99999999999999, -22.99999999998656, 17)
 456 SketchConstraintCoincidence_79 = Sketch_7.setCoincident(SketchPoint_4.coordinates(), SketchCircle_10.center())
 457 SketchConstraintCoincidence_79.setName("SketchConstraintCoincidence_80")
 458 SketchConstraintRadius_8 = Sketch_7.setRadius(SketchCircle_10.results()[1], 17)
 459 model.do()
 460 Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchCircle_10_2f")], model.selection(), 16, 0)
 461 Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_3_1/To_Face_1"))
 462 SketchProjection_6 = Sketch_8.addProjection(model.selection("EDGE", "Sketch_2/Edge-SketchLine_9"))
 463 SketchLine_54 = SketchProjection_6.createdFeature()
 464 SketchLine_54.setName("SketchLine_55")
 465 SketchLine_54.result().setName("SketchLine_55")
 466 SketchProjection_7 = Sketch_8.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&ExtrusionCut_3_1/Modfied_4"))
 467 SketchLine_55 = SketchProjection_7.createdFeature()
 468 SketchLine_55.setName("SketchLine_56")
 469 SketchLine_55.result().setName("SketchLine_56")
 470 SketchLine_56 = Sketch_8.addLine(0, -22.99999999998656, -76, -22.99999999999327)
 471 SketchLine_56.setName("SketchLine_57")
 472 SketchLine_56.result().setName("SketchLine_57")
 473 SketchLine_56.setAuxiliary(True)
 474 SketchConstraintCoincidence_80 = Sketch_8.setCoincident(SketchLine_56.startPoint(), SketchLine_55.result())
 475 SketchConstraintCoincidence_80.setName("SketchConstraintCoincidence_81")
 476 SketchConstraintCoincidence_81 = Sketch_8.setCoincident(SketchLine_56.endPoint(), SketchLine_54.result())
 477 SketchConstraintCoincidence_81.setName("SketchConstraintCoincidence_82")
 478 SketchConstraintMiddle_21 = Sketch_8.setMiddlePoint(SketchLine_56.endPoint(), SketchLine_54.result())
 479 SketchConstraintMiddle_22 = Sketch_8.setMiddlePoint(SketchLine_55.result(), SketchLine_56.startPoint())
 480 SketchLine_57 = Sketch_8.addLine(-37.99999999999842, -40.99999999998655, -38.000000000002, 0)
 481 SketchLine_57.setName("SketchLine_58")
 482 SketchLine_57.result().setName("SketchLine_58")
 483 SketchLine_57.setAuxiliary(True)
 484 SketchPoint_5 = Sketch_8.addPoint(-38, -22.99999999998992)
 485 SketchConstraintCoincidence_82 = Sketch_8.setCoincident(SketchPoint_5.coordinates(), SketchLine_56.result())
 486 SketchConstraintCoincidence_82.setName("SketchConstraintCoincidence_83")
 487 SketchConstraintMiddle_23 = Sketch_8.setMiddlePoint(SketchLine_56.result(), SketchPoint_5.coordinates())
 488 SketchConstraintCoincidence_83 = Sketch_8.setCoincident(SketchLine_57.result(), SketchPoint_5.coordinates())
 489 SketchConstraintCoincidence_83.setName("SketchConstraintCoincidence_84")
 490 SketchConstraintPerpendicular_1 = Sketch_8.setPerpendicular(SketchLine_57.result(), SketchLine_56.result())
 491 SketchProjection_8 = Sketch_8.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&ExtrusionCut_4_2/Modfied_4"))
 492 SketchLine_58 = SketchProjection_8.createdFeature()
 493 SketchLine_58.setName("SketchLine_59")
 494 SketchLine_58.result().setName("SketchLine_59")
 495 SketchProjection_9 = Sketch_8.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_1"))
 496 SketchLine_59 = SketchProjection_9.createdFeature()
 497 SketchLine_59.setName("SketchLine_60")
 498 SketchLine_59.result().setName("SketchLine_60")
 499 SketchConstraintCoincidence_84 = Sketch_8.setCoincident(SketchLine_57.startPoint(), SketchLine_58.result())
 500 SketchConstraintCoincidence_84.setName("SketchConstraintCoincidence_85")
 501 SketchConstraintCoincidence_85 = Sketch_8.setCoincident(SketchLine_57.endPoint(), SketchLine_59.result())
 502 SketchConstraintCoincidence_85.setName("SketchConstraintCoincidence_86")
 503 SketchCircle_11 = Sketch_8.addCircle(-30, -22.99999999998921, 2.5)
 504 SketchConstraintCoincidence_86 = Sketch_8.setCoincident(SketchLine_56.result(), SketchCircle_11.center())
 505 SketchConstraintCoincidence_86.setName("SketchConstraintCoincidence_87")
 506 SketchCircle_12 = Sketch_8.addCircle(-46.00000000004985, -22.99999999999062, 2.5)
 507 SketchConstraintCoincidence_87 = Sketch_8.setCoincident(SketchLine_56.result(), SketchCircle_12.center())
 508 SketchConstraintCoincidence_87.setName("SketchConstraintCoincidence_88")
 509 SketchConstraintEqual_17 = Sketch_8.setEqual(SketchCircle_12.results()[1], SketchCircle_11.results()[1])
 510 SketchConstraintRadius_9 = Sketch_8.setRadius(SketchCircle_11.results()[1], 2.5)
 511 SketchConstraintDistance_15 = Sketch_8.setDistance(SketchCircle_11.center(), SketchLine_57.result(), 8)
 512 SketchConstraintDistance_16 = Sketch_8.setDistance(SketchCircle_11.center(), SketchCircle_12.center(), 16)
 513 model.do()
 514 Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchCircle_11_2f"), model.selection("FACE", "Sketch_8/Face-SketchCircle_12_2f")], model.selection(), 17, 0)
 515 Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "ExtrusionCut_3_1/Modfied_4"), 38, True)
 516 Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
 517 SketchLine_60 = Sketch_9.addLine(-14, -36.99999999998992, 0, -36.99999999998992)
 518 SketchLine_60.setName("SketchLine_61")
 519 SketchLine_60.result().setName("SketchLine_61")
 520 SketchLine_61 = Sketch_9.addLine(0, -36.99999999998992, 0, -22.99999999998992)
 521 SketchLine_61.setName("SketchLine_62")
 522 SketchLine_61.result().setName("SketchLine_62")
 523 SketchLine_62 = Sketch_9.addLine(0, -22.99999999998992, -14, -22.99999999998992)
 524 SketchLine_62.setName("SketchLine_63")
 525 SketchLine_62.result().setName("SketchLine_63")
 526 SketchLine_63 = Sketch_9.addLine(-14, -22.99999999998992, -14, -36.99999999998992)
 527 SketchLine_63.setName("SketchLine_64")
 528 SketchLine_63.result().setName("SketchLine_64")
 529 SketchConstraintCoincidence_88 = Sketch_9.setCoincident(SketchLine_63.endPoint(), SketchLine_60.startPoint())
 530 SketchConstraintCoincidence_88.setName("SketchConstraintCoincidence_89")
 531 SketchConstraintCoincidence_89 = Sketch_9.setCoincident(SketchLine_60.endPoint(), SketchLine_61.startPoint())
 532 SketchConstraintCoincidence_89.setName("SketchConstraintCoincidence_90")
 533 SketchConstraintCoincidence_90 = Sketch_9.setCoincident(SketchLine_61.endPoint(), SketchLine_62.startPoint())
 534 SketchConstraintCoincidence_90.setName("SketchConstraintCoincidence_91")
 535 SketchConstraintCoincidence_91 = Sketch_9.setCoincident(SketchLine_62.endPoint(), SketchLine_63.startPoint())
 536 SketchConstraintCoincidence_91.setName("SketchConstraintCoincidence_92")
 537 SketchConstraintHorizontal_11 = Sketch_9.setHorizontal(SketchLine_60.result())
 538 SketchConstraintVertical_7 = Sketch_9.setVertical(SketchLine_61.result())
 539 SketchConstraintHorizontal_12 = Sketch_9.setHorizontal(SketchLine_62.result())
 540 SketchConstraintVertical_8 = Sketch_9.setVertical(SketchLine_63.result())
 541 SketchConstraintLength_7 = Sketch_9.setLength(SketchLine_61.result(), 14)
 542 SketchConstraintEqual_18 = Sketch_9.setEqual(SketchLine_61.result(), SketchLine_60.result())
 543 SketchLine_64 = Sketch_9.addLine(-5.662490896925754, -22.99999999998992, -60.5217691188193, -22.99999999998992)
 544 SketchLine_64.setName("SketchLine_65")
 545 SketchLine_64.result().setName("SketchLine_65")
 546 SketchLine_64.setAuxiliary(True)
 547 SketchPoint_6 = Sketch_9.addPoint(model.selection("VERTEX", "Sketch_8/Vertex-SketchPoint_5"))
 548 SketchConstraintCoincidence_92 = Sketch_9.setCoincident(SketchLine_64.result(), SketchPoint_6.coordinates())
 549 SketchConstraintCoincidence_92.setName("SketchConstraintCoincidence_93")
 550 SketchConstraintHorizontal_13 = Sketch_9.setHorizontal(SketchLine_64.result())
 551 SketchConstraintCoincidence_93 = Sketch_9.setCoincident(SketchLine_62.startPoint(), SketchLine_64.result())
 552 SketchConstraintCoincidence_93.setName("SketchConstraintCoincidence_94")
 553 SketchLine_65 = Sketch_9.addLine(model.selection("EDGE", "Sketch_7/Edge-SketchLine_52"))
 554 SketchLine_65.setName("SketchLine_66")
 555 SketchLine_65.result().setName("SketchLine_66")
 556 SketchConstraintCoincidence_94 = Sketch_9.setCoincident(SketchLine_60.endPoint(), SketchLine_65.result())
 557 SketchConstraintCoincidence_94.setName("SketchConstraintCoincidence_95")
 558 model.do()
 559 RevolutionCut_1 = model.addRevolutionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_9")], model.selection("EDGE", "Sketch_9/Edge-SketchLine_65"), 360, 0, [model.selection("SOLID", "Extrusion_3_1")])
 560 model.do()
 561
 562 from GeomAPI import  GeomAPI_Shape
 563
 564 model.testNbResults(Part_1, 1)
 565 model.testNbSubResults(Part_1, [0])
 566 model.testNbSubShapes(Part_1, GeomAPI_Shape.SOLID, [5])
 567 model.testNbSubShapes(Part_1, GeomAPI_Shape.FACE, [78])
 568 model.testNbSubShapes(Part_1, GeomAPI_Shape.EDGE, [340])
 569 model.testNbSubShapes(Part_1, GeomAPI_Shape.VERTEX, [680])
 570 model.testResultsVolumes(Part_1, [61675.12443110236])
 571 model.end()
 572
 573 assert(model.checkPythonDump())