test.models/gear.py

   1 from SketchAPI import *
   2
   3 from salome.shaper import model
   4
   5 model.begin()
   6 partSet = model.moduleDocument()
   7 Sketch_1 = model.addSketch(partSet, model.defaultPlane("XOY"))
   8 SketchLine_1 = Sketch_1.addLine(0, 0, 30, 0)
   9 SketchPoint_1 = Sketch_1.addPoint(model.selection("VERTEX", "Origin"))
  10 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchPoint_1.result())
  11 SketchLine_2 = Sketch_1.addLine(model.selection("EDGE", "OX"))
  12 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.result())
  13 SketchLine_3 = Sketch_1.addLine(30, 0, 30, 37.5)
  14 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
  15 SketchLine_4 = Sketch_1.addLine(30, 37.5, 17, 37.5)
  16 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  17 SketchLine_5 = Sketch_1.addLine(17, 37.5, 17, 15.5)
  18 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  19 SketchLine_6 = Sketch_1.addLine(17, 15.5, 0, 15.5)
  20 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  21 SketchLine_7 = Sketch_1.addLine(model.selection("EDGE", "OY"))
  22 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.result())
  23 SketchLine_8 = Sketch_1.addLine(0, 15.5, 0, 0)
  24 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_8.startPoint())
  25 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_4.result())
  26 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_3.result())
  27 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_5.result())
  28 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_8.result())
  29 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_6.result())
  30 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_1.endPoint(), SketchLine_8.result(), 30)
  31 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_3.result(), 37.5)
  32 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_8.result(), 15.5)
  33 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchPoint_1.coordinates())
  34 SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_4.result(), 13)
  35 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_1.startPoint())
  36 model.do()
  37 Part_1 = model.addPart(partSet)
  38 Part_1_doc = Part_1.document()
  39 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
  40 SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "PartSet/Origin"))
  41 SketchLine_9 = Sketch_2.addLine(0, 0, 0, 45.59203984275747)
  42 SketchLine_9.setAuxiliary(True)
  43 SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchPoint_2.coordinates(), SketchLine_9.startPoint())
  44 SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_9.result())
  45 SketchLine_10 = Sketch_2.addLine(-2.5, 37.41657386773942, -0.9611800001338426, 34.11656372860793)
  46 SketchArc_1 = Sketch_2.addArc(0, 34.39248583236681, -0.9611800001338426, 34.11656372860793, 0, 33.39248583236681, False)
  47 SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchArc_1.startPoint())
  48 SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchArc_1.center(), SketchLine_9.result())
  49 SketchConstraintAngle_1 = Sketch_2.setAngleBackward(SketchLine_10.result(), SketchLine_9.result(), 205)
  50 SketchConstraintRadius_1 = Sketch_2.setRadius(SketchArc_1.results()[1], 1)
  51 SketchConstraintDistance_2 = Sketch_2.setDistance(SketchLine_10.startPoint(), SketchLine_9.result(), 2.5)
  52 SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchArc_1.endPoint(), SketchLine_9.result())
  53 SketchArc_2 = Sketch_2.addArc(0, 0, -2.5, 37.41657386773942, 0, 37.5, True)
  54 SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchArc_2.center(), SketchPoint_2.result())
  55 SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_10.startPoint(), SketchArc_2.startPoint())
  56 SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_9.result(), SketchArc_2.endPoint())
  57 SketchConstraintMirror_1 = Sketch_2.addMirror(SketchLine_9.result(), [SketchLine_10.result(), SketchArc_1.results()[1], SketchArc_2.results()[1]])
  58 [SketchLine_11, SketchArc_3, SketchArc_4] = SketchConstraintMirror_1.mirrored()
  59 SketchMultiRotation_1_objects = [SketchArc_1.results()[1], SketchLine_10.result(), SketchArc_2.results()[1], SketchArc_3.results()[1], SketchLine_11.result(), SketchArc_4.results()[1]]
  60 SketchMultiRotation_1 = Sketch_2.addRotation(SketchMultiRotation_1_objects, SketchArc_2.center(), 12, 30)
  61 SketchConstraintRadius_2 = Sketch_2.setRadius(SketchArc_2.results()[1], 37.5)
  62 model.do()
  63 Sketch_3 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  64 SketchLine_70 = Sketch_3.addLine(0, 0, 30, 0)
  65 SketchLine_70.setAuxiliary(True)
  66 SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "PartSet/Origin"))
  67 SketchConstraintCoincidence_18 = Sketch_3.setCoincident(SketchLine_70.startPoint(), SketchPoint_3.result())
  68 SketchLine_71 = Sketch_3.addLine(30, 0, 30, 37.5)
  69 SketchLine_71.setAuxiliary(True)
  70 SketchConstraintCoincidence_19 = Sketch_3.setCoincident(SketchLine_70.endPoint(), SketchLine_71.startPoint())
  71 SketchLine_72 = Sketch_3.addLine(30, 37.5, 17, 37.5)
  72 SketchLine_72.setAuxiliary(True)
  73 SketchConstraintCoincidence_20 = Sketch_3.setCoincident(SketchLine_71.endPoint(), SketchLine_72.startPoint())
  74 SketchConstraintHorizontal_3 = Sketch_3.setHorizontal(SketchLine_72.result())
  75 SketchConstraintHorizontal_4 = Sketch_3.setHorizontal(SketchLine_70.result())
  76 SketchConstraintVertical_5 = Sketch_3.setVertical(SketchLine_71.result())
  77 SketchConstraintLength_4 = Sketch_3.setLength(SketchLine_70.result(), 30)
  78 SketchConstraintLength_5 = Sketch_3.setLength(SketchLine_71.result(), 37.5)
  79 SketchConstraintLength_6 = Sketch_3.setLength(SketchLine_72.result(), 13)
  80 SketchLine_73 = Sketch_3.addLine(29, 37.49999999999999, 30, 36.49999999999999)
  81 SketchConstraintCoincidence_21 = Sketch_3.setCoincident(SketchLine_73.startPoint(), SketchLine_72.result())
  82 SketchConstraintCoincidence_22 = Sketch_3.setCoincident(SketchLine_73.endPoint(), SketchLine_71.result())
  83 SketchLine_74 = Sketch_3.addLine(17, 37.5, 17, 36.5)
  84 SketchLine_75 = Sketch_3.addLine(17, 36.5, 17.99999999999994, 37.5)
  85 SketchConstraintCoincidence_23 = Sketch_3.setCoincident(SketchLine_74.endPoint(), SketchLine_75.startPoint())
  86 SketchConstraintCoincidence_24 = Sketch_3.setCoincident(SketchLine_75.endPoint(), SketchLine_72.result())
  87 SketchConstraintCoincidence_25 = Sketch_3.setCoincident(SketchLine_72.endPoint(), SketchLine_74.startPoint())
  88 SketchConstraintVertical_6 = Sketch_3.setVertical(SketchLine_74.result())
  89 SketchConstraintLength_7 = Sketch_3.setLength(SketchLine_74.result(), 1)
  90 SketchConstraintDistance_3 = Sketch_3.setDistance(SketchLine_75.endPoint(), SketchLine_74.result(), 1)
  91 SketchConstraintDistance_4 = Sketch_3.setDistance(SketchLine_73.startPoint(), SketchLine_71.result(), 1)
  92 SketchConstraintDistance_5 = Sketch_3.setDistance(SketchLine_73.endPoint(), SketchLine_72.result(), 1)
  93 SketchLine_76 = Sketch_3.addLine(17, 37.5, 17.99999999999994, 37.5)
  94 SketchConstraintCoincidence_26 = Sketch_3.setCoincident(SketchLine_72.endPoint(), SketchLine_76.startPoint())
  95 SketchConstraintCoincidence_27 = Sketch_3.setCoincident(SketchLine_74.startPoint(), SketchLine_76.startPoint())
  96 SketchConstraintCoincidence_28 = Sketch_3.setCoincident(SketchLine_75.endPoint(), SketchLine_76.endPoint())
  97 SketchLine_77 = Sketch_3.addLine(29, 37.49999999999999, 30, 37.5)
  98 SketchConstraintCoincidence_29 = Sketch_3.setCoincident(SketchLine_73.startPoint(), SketchLine_77.startPoint())
  99 SketchConstraintCoincidence_30 = Sketch_3.setCoincident(SketchLine_71.endPoint(), SketchLine_77.endPoint())
 100 SketchConstraintCoincidence_31 = Sketch_3.setCoincident(SketchLine_72.startPoint(), SketchLine_77.endPoint())
 101 SketchLine_78 = Sketch_3.addLine(30, 37.5, 30, 36.49999999999999)
 102 SketchConstraintCoincidence_32 = Sketch_3.setCoincident(SketchLine_71.endPoint(), SketchLine_78.startPoint())
 103 SketchConstraintCoincidence_33 = Sketch_3.setCoincident(SketchLine_72.startPoint(), SketchLine_78.startPoint())
 104 SketchConstraintCoincidence_34 = Sketch_3.setCoincident(SketchLine_77.endPoint(), SketchLine_78.startPoint())
 105 SketchConstraintCoincidence_35 = Sketch_3.setCoincident(SketchLine_73.endPoint(), SketchLine_78.endPoint())
 106 SketchLine_79 = Sketch_3.addLine(0, 0, 0, 15)
 107 SketchLine_79.setAuxiliary(True)
 108 SketchConstraintCoincidence_36 = Sketch_3.setCoincident(SketchLine_79.startPoint(), SketchPoint_3.result())
 109 SketchConstraintVertical_7 = Sketch_3.setVertical(SketchLine_79.result())
 110 SketchConstraintLength_8 = Sketch_3.setLength(SketchLine_79.result(), 15)
 111 SketchLine_80 = Sketch_3.addLine(0, 15, 0.5, 15)
 112 SketchLine_80.setAuxiliary(True)
 113 SketchConstraintCoincidence_37 = Sketch_3.setCoincident(SketchLine_79.endPoint(), SketchLine_80.startPoint())
 114 SketchConstraintHorizontal_5 = Sketch_3.setHorizontal(SketchLine_80.result())
 115 SketchArc_61 = Sketch_3.addArc(0.5, 15, 0, 15, 0.4999999999999999, 15.5, True)
 116 SketchConstraintCoincidence_38 = Sketch_3.setCoincident(SketchLine_80.endPoint(), SketchArc_61.center())
 117 SketchConstraintCoincidence_39 = Sketch_3.setCoincident(SketchLine_79.endPoint(), SketchArc_61.startPoint())
 118 SketchConstraintCoincidence_40 = Sketch_3.setCoincident(SketchLine_80.startPoint(), SketchArc_61.startPoint())
 119 SketchLine_81 = Sketch_3.addLine(0.5, 15, 0.5, 15.66051714754979)
 120 SketchLine_81.setAuxiliary(True)
 121 SketchConstraintCoincidence_41 = Sketch_3.setCoincident(SketchLine_80.endPoint(), SketchLine_81.startPoint())
 122 SketchConstraintCoincidence_42 = Sketch_3.setCoincident(SketchArc_61.center(), SketchLine_81.startPoint())
 123 SketchConstraintVertical_8 = Sketch_3.setVertical(SketchLine_81.result())
 124 SketchConstraintCoincidence_43 = Sketch_3.setCoincident(SketchArc_61.endPoint(), SketchLine_81.result())
 125 SketchConstraintRadius_3 = Sketch_3.setRadius(SketchArc_61.results()[1], 0.5)
 126 SketchLine_82 = Sketch_3.addLine(0.4999999999999999, 15.5, 0.4988301186899768, 15.74914940994379)
 127 SketchConstraintCoincidence_44 = Sketch_3.setCoincident(SketchArc_61.endPoint(), SketchLine_82.startPoint())
 128 SketchLine_83 = Sketch_3.addLine(0.4988301186899768, 15.74914940994379, -0.3081878496471824, 15.75231418629021)
 129 SketchConstraintCoincidence_45 = Sketch_3.setCoincident(SketchLine_82.endPoint(), SketchLine_83.startPoint())
 130 SketchLine_84 = Sketch_3.addLine(-0.3081878496471824, 15.75231418629021, -0.3081878496471824, 14.99276786314936)
 131 SketchConstraintCoincidence_46 = Sketch_3.setCoincident(SketchLine_83.endPoint(), SketchLine_84.startPoint())
 132 SketchLine_85 = Sketch_3.addLine(-0.3081878496471824, 14.99276786314936, 0, 15)
 133 SketchConstraintCoincidence_47 = Sketch_3.setCoincident(SketchLine_84.endPoint(), SketchLine_85.startPoint())
 134 SketchConstraintCoincidence_48 = Sketch_3.setCoincident(SketchLine_79.endPoint(), SketchLine_85.endPoint())
 135 SketchConstraintCoincidence_49 = Sketch_3.setCoincident(SketchLine_80.startPoint(), SketchLine_85.endPoint())
 136 SketchConstraintCoincidence_50 = Sketch_3.setCoincident(SketchArc_61.startPoint(), SketchLine_85.endPoint())
 137 model.do()
 138 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "PartSet/Sketch_1")], model.selection("EDGE", "PartSet/Sketch_1/Edge-SketchLine_1"), 360, 0)
 139 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face_5"))
 140 SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "PartSet/Origin"))
 141 SketchLine_86 = Sketch_4.addLine(0, -13.49999999999519, 3.1, -13.49999999999519)
 142 SketchLine_87 = Sketch_4.addLine(model.selection("EDGE", "PartSet/OZ"))
 143 SketchConstraintCoincidence_51 = Sketch_4.setCoincident(SketchLine_86.startPoint(), SketchLine_87.result())
 144 SketchLine_88 = Sketch_4.addLine(3.1, -13.49999999999519, 3.1, -10.55414610473955)
 145 SketchConstraintCoincidence_52 = Sketch_4.setCoincident(SketchLine_86.endPoint(), SketchLine_88.startPoint())
 146 SketchLine_89 = Sketch_4.addLine(0, -10.5290802744499, 0, 12.80434395246332)
 147 SketchLine_89.setAuxiliary(True)
 148 SketchConstraintCoincidence_53 = Sketch_4.setCoincident(SketchLine_89.startPoint(), SketchLine_87.result())
 149 SketchConstraintVertical_9 = Sketch_4.setVertical(SketchLine_89.result())
 150 SketchConstraintHorizontal_6 = Sketch_4.setHorizontal(SketchLine_86.result())
 151 SketchConstraintVertical_10 = Sketch_4.setVertical(SketchLine_88.result())
 152 SketchConstraintLength_9 = Sketch_4.setLength(SketchLine_86.result(), 3.1)
 153 SketchConstraintMirror_2 = Sketch_4.addMirror(SketchLine_87.result(), [SketchLine_86.result(), SketchLine_88.result()])
 154 [SketchLine_90, SketchLine_91] = SketchConstraintMirror_2.mirrored()
 155 SketchArc_62 = Sketch_4.addArc(0, 0, 3.1, -10.55414610473955, -3.100000000000001, -10.55414610473344, False)
 156 SketchConstraintCoincidence_54 = Sketch_4.setCoincident(SketchPoint_4.coordinates(), SketchArc_62.center())
 157 SketchConstraintCoincidence_55 = Sketch_4.setCoincident(SketchLine_87.startPoint(), SketchArc_62.center())
 158 SketchConstraintCoincidence_56 = Sketch_4.setCoincident(SketchArc_62.startPoint(), SketchLine_88.result())
 159 SketchConstraintCoincidence_57 = Sketch_4.setCoincident(SketchArc_62.endPoint(), SketchLine_91.result())
 160 SketchConstraintRadius_4 = Sketch_4.setRadius(SketchArc_62.results()[1], 11)
 161 SketchConstraintCoincidence_58 = Sketch_4.setCoincident(SketchLine_88.endPoint(), SketchArc_62.startPoint())
 162 SketchPoint_5 = Sketch_4.addPoint(3.1, -10.55414610473955)
 163 SketchConstraintCoincidence_59 = Sketch_4.setCoincident(SketchLine_88.endPoint(), SketchPoint_5.coordinates())
 164 SketchConstraintCoincidence_60 = Sketch_4.setCoincident(SketchArc_62.startPoint(), SketchPoint_5.coordinates())
 165 SketchPoint_6 = Sketch_4.addPoint(0, 11.00000000000481)
 166 SketchPoint_6.setAuxiliary(True)
 167 SketchConstraintCoincidence_61 = Sketch_4.setCoincident(SketchPoint_6.coordinates(), SketchArc_62.results()[1])
 168 SketchConstraintCoincidence_62 = Sketch_4.setCoincident(SketchPoint_6.coordinates(), SketchLine_89.result())
 169 SketchConstraintDistance_6 = Sketch_4.setDistance(SketchPoint_6.coordinates(), SketchLine_86.result(), 24.5)
 170 model.do()
 171 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), model.selection("FACE", "Revolution_1_1/Generated_Face_1"), 0, model.selection(), 0, [model.selection("SOLID", "Revolution_1_1")])
 172 RevolutionCut_1 = model.addRevolutionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection("EDGE", "PartSet/OX"), 0, 360, [model.selection("SOLID", "ExtrusionCut_1_1")])
 173 model.do()
 174 model.end()
 175
 176 from GeomAPI import GeomAPI_Shape
 177
 178 model.testNbResults(RevolutionCut_1, 1)
 179 model.testNbSubResults(RevolutionCut_1, [0])
 180 model.testNbSubShapes(RevolutionCut_1, GeomAPI_Shape.SOLID, [1])
 181 model.testNbSubShapes(RevolutionCut_1, GeomAPI_Shape.FACE, [218])
 182 model.testNbSubShapes(RevolutionCut_1, GeomAPI_Shape.EDGE, [1284])
 183 model.testNbSubShapes(RevolutionCut_1, GeomAPI_Shape.VERTEX, [2568])
 184 model.testResultsVolumes(RevolutionCut_1, [65202.414255050614883657544851303])
 185
 186 assert(model.checkPythonDump())