test.models/gear.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 from SketchAPI import *
  22
  23 from salome.shaper import model
  24
  25 model.begin()
  26 partSet = model.moduleDocument()
  27 Parameter_R = model.addParameter(partSet, "R", "15.5")
  28 Sketch_1 = model.addSketch(partSet, model.defaultPlane("XOY"))
  29 SketchLine_1 = Sketch_1.addLine(0, 0, 30, 0)
  30 SketchPoint_1 = Sketch_1.addPoint(model.selection("VERTEX", "Origin"))
  31 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchPoint_1.result())
  32 SketchLine_2 = Sketch_1.addLine(model.selection("EDGE", "OX"))
  33 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.result())
  34 SketchLine_3 = Sketch_1.addLine(30, 0, 30, 37.5)
  35 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
  36 SketchLine_4 = Sketch_1.addLine(30, 37.5, 17, 37.5)
  37 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  38 SketchLine_5 = Sketch_1.addLine(17, 37.5, 17, 15.5)
  39 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  40 SketchLine_6 = Sketch_1.addLine(17, 15.5, 0, 15.5)
  41 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  42 SketchLine_7 = Sketch_1.addLine(model.selection("EDGE", "OY"))
  43 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.result())
  44 SketchLine_8 = Sketch_1.addLine(0, 15.5, 0, 0)
  45 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_8.startPoint())
  46 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_4.result())
  47 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_3.result())
  48 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_5.result())
  49 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_8.result())
  50 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_6.result())
  51 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_1.endPoint(), SketchLine_8.result(), 30)
  52 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_3.result(), 37.5)
  53 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_8.result(), "R")
  54 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchPoint_1.coordinates())
  55 SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_4.result(), 13)
  56 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_1.startPoint())
  57 model.do()
  58 Part_1 = model.addPart(partSet)
  59 Part_1_doc = Part_1.document()
  60 model.addParameter(Part_1_doc, "R_fillet", "0.5")
  61 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
  62 SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "PartSet/Origin"))
  63 SketchLine_9 = Sketch_2.addLine(0, 0, 0, 45.59203984275747)
  64 SketchLine_9.setAuxiliary(True)
  65 SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchPoint_2.coordinates(), SketchLine_9.startPoint())
  66 SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_9.result())
  67 SketchLine_10 = Sketch_2.addLine(-2.5, 37.41657386773942, -0.9611800001338426, 34.11656372860793)
  68 SketchArc_1 = Sketch_2.addArc(0, 34.39248583236681, -0.9611800001338426, 34.11656372860793, 0, 33.39248583236681, False)
  69 SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchArc_1.startPoint())
  70 SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchArc_1.center(), SketchLine_9.result())
  71 SketchConstraintAngle_1 = Sketch_2.setAngleBackward(SketchLine_10.result(), SketchLine_9.result(), 205)
  72 SketchConstraintRadius_1 = Sketch_2.setRadius(SketchArc_1.results()[1], 1)
  73 SketchConstraintDistance_2 = Sketch_2.setDistance(SketchLine_10.startPoint(), SketchLine_9.result(), 2.5)
  74 SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchArc_1.endPoint(), SketchLine_9.result())
  75 SketchArc_2 = Sketch_2.addArc(0, 0, -2.5, 37.41657386773942, 0, 37.5, True)
  76 SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchArc_2.center(), SketchPoint_2.result())
  77 SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_10.startPoint(), SketchArc_2.startPoint())
  78 SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_9.result(), SketchArc_2.endPoint())
  79 SketchConstraintMirror_1 = Sketch_2.addMirror(SketchLine_9.result(), [SketchLine_10.result(), SketchArc_1.results()[1], SketchArc_2.results()[1]])
  80 [SketchLine_11, SketchArc_3, SketchArc_4] = SketchConstraintMirror_1.mirrored()
  81 SketchMultiRotation_1_objects = [SketchArc_1.results()[1], SketchLine_10.result(), SketchArc_2.results()[1], SketchArc_3.results()[1], SketchLine_11.result(), SketchArc_4.results()[1]]
  82 SketchMultiRotation_1 = Sketch_2.addRotation(SketchMultiRotation_1_objects, SketchArc_2.center(), 12, 30)
  83 SketchConstraintRadius_2 = Sketch_2.setRadius(SketchArc_2.results()[1], 37.5)
  84 model.do()
  85 Sketch_3 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  86 SketchLine_70 = Sketch_3.addLine(0, 0, 30, 0)
  87 SketchLine_70.setAuxiliary(True)
  88 SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "PartSet/Origin"))
  89 SketchConstraintCoincidence_18 = Sketch_3.setCoincident(SketchLine_70.startPoint(), SketchPoint_3.result())
  90 SketchLine_71 = Sketch_3.addLine(30, 0, 30, 37.5)
  91 SketchLine_71.setAuxiliary(True)
  92 SketchConstraintCoincidence_19 = Sketch_3.setCoincident(SketchLine_70.endPoint(), SketchLine_71.startPoint())
  93 SketchLine_72 = Sketch_3.addLine(30, 37.5, 17, 37.5)
  94 SketchLine_72.setAuxiliary(True)
  95 SketchConstraintCoincidence_20 = Sketch_3.setCoincident(SketchLine_71.endPoint(), SketchLine_72.startPoint())
  96 SketchConstraintHorizontal_3 = Sketch_3.setHorizontal(SketchLine_72.result())
  97 SketchConstraintHorizontal_4 = Sketch_3.setHorizontal(SketchLine_70.result())
  98 SketchConstraintVertical_5 = Sketch_3.setVertical(SketchLine_71.result())
  99 SketchConstraintLength_4 = Sketch_3.setLength(SketchLine_70.result(), 30)
 100 SketchConstraintLength_5 = Sketch_3.setLength(SketchLine_71.result(), 37.5)
 101 SketchConstraintLength_6 = Sketch_3.setLength(SketchLine_72.result(), 13)
 102 SketchLine_73 = Sketch_3.addLine(29, 37.49999999999999, 30, 36.49999999999999)
 103 SketchConstraintCoincidence_21 = Sketch_3.setCoincident(SketchLine_73.startPoint(), SketchLine_72.result())
 104 SketchConstraintCoincidence_22 = Sketch_3.setCoincident(SketchLine_73.endPoint(), SketchLine_71.result())
 105 SketchLine_74 = Sketch_3.addLine(17, 37.5, 17, 36.5)
 106 SketchLine_75 = Sketch_3.addLine(17, 36.5, 17.99999999999994, 37.5)
 107 SketchConstraintCoincidence_23 = Sketch_3.setCoincident(SketchLine_74.endPoint(), SketchLine_75.startPoint())
 108 SketchConstraintCoincidence_24 = Sketch_3.setCoincident(SketchLine_75.endPoint(), SketchLine_72.result())
 109 SketchConstraintCoincidence_25 = Sketch_3.setCoincident(SketchLine_72.endPoint(), SketchLine_74.startPoint())
 110 SketchConstraintVertical_6 = Sketch_3.setVertical(SketchLine_74.result())
 111 SketchConstraintLength_7 = Sketch_3.setLength(SketchLine_74.result(), 1)
 112 SketchConstraintDistance_3 = Sketch_3.setDistance(SketchLine_75.endPoint(), SketchLine_74.result(), 1)
 113 SketchConstraintDistance_4 = Sketch_3.setDistance(SketchLine_73.startPoint(), SketchLine_71.result(), 1)
 114 SketchConstraintDistance_5 = Sketch_3.setDistance(SketchLine_73.endPoint(), SketchLine_72.result(), 1)
 115 SketchLine_76 = Sketch_3.addLine(17, 37.5, 17.99999999999994, 37.5)
 116 SketchConstraintCoincidence_26 = Sketch_3.setCoincident(SketchLine_72.endPoint(), SketchLine_76.startPoint())
 117 SketchConstraintCoincidence_27 = Sketch_3.setCoincident(SketchLine_74.startPoint(), SketchLine_76.startPoint())
 118 SketchConstraintCoincidence_28 = Sketch_3.setCoincident(SketchLine_75.endPoint(), SketchLine_76.endPoint())
 119 SketchLine_77 = Sketch_3.addLine(29, 37.49999999999999, 30, 37.5)
 120 SketchConstraintCoincidence_29 = Sketch_3.setCoincident(SketchLine_73.startPoint(), SketchLine_77.startPoint())
 121 SketchConstraintCoincidence_30 = Sketch_3.setCoincident(SketchLine_71.endPoint(), SketchLine_77.endPoint())
 122 SketchConstraintCoincidence_31 = Sketch_3.setCoincident(SketchLine_72.startPoint(), SketchLine_77.endPoint())
 123 SketchLine_78 = Sketch_3.addLine(30, 37.5, 30, 36.49999999999999)
 124 SketchConstraintCoincidence_32 = Sketch_3.setCoincident(SketchLine_71.endPoint(), SketchLine_78.startPoint())
 125 SketchConstraintCoincidence_33 = Sketch_3.setCoincident(SketchLine_72.startPoint(), SketchLine_78.startPoint())
 126 SketchConstraintCoincidence_34 = Sketch_3.setCoincident(SketchLine_77.endPoint(), SketchLine_78.startPoint())
 127 SketchConstraintCoincidence_35 = Sketch_3.setCoincident(SketchLine_73.endPoint(), SketchLine_78.endPoint())
 128 SketchLine_79 = Sketch_3.addLine(0, 0, 0, 15)
 129 SketchLine_79.setAuxiliary(True)
 130 SketchConstraintCoincidence_36 = Sketch_3.setCoincident(SketchLine_79.startPoint(), SketchPoint_3.result())
 131 SketchConstraintVertical_7 = Sketch_3.setVertical(SketchLine_79.result())
 132 SketchConstraintLength_8 = Sketch_3.setLength(SketchLine_79.result(), "R-R_fillet")
 133 SketchLine_80 = Sketch_3.addLine(0, 15, 0.5, 15)
 134 SketchLine_80.setAuxiliary(True)
 135 SketchConstraintCoincidence_37 = Sketch_3.setCoincident(SketchLine_79.endPoint(), SketchLine_80.startPoint())
 136 SketchConstraintHorizontal_5 = Sketch_3.setHorizontal(SketchLine_80.result())
 137 SketchArc_61 = Sketch_3.addArc(0.5, 15, 0, 15, 0.5, 15.5, True)
 138 SketchConstraintCoincidence_38 = Sketch_3.setCoincident(SketchLine_80.endPoint(), SketchArc_61.center())
 139 SketchConstraintCoincidence_39 = Sketch_3.setCoincident(SketchLine_79.endPoint(), SketchArc_61.startPoint())
 140 SketchConstraintCoincidence_40 = Sketch_3.setCoincident(SketchLine_80.startPoint(), SketchArc_61.startPoint())
 141 SketchLine_81 = Sketch_3.addLine(0.5, 15, 0.5, 16)
 142 SketchLine_81.setAuxiliary(True)
 143 SketchConstraintCoincidence_41 = Sketch_3.setCoincident(SketchLine_80.endPoint(), SketchLine_81.startPoint())
 144 SketchConstraintCoincidence_42 = Sketch_3.setCoincident(SketchArc_61.center(), SketchLine_81.startPoint())
 145 SketchConstraintVertical_8 = Sketch_3.setVertical(SketchLine_81.result())
 146 SketchConstraintCoincidence_43 = Sketch_3.setCoincident(SketchArc_61.endPoint(), SketchLine_81.result())
 147 SketchConstraintRadius_3 = Sketch_3.setRadius(SketchArc_61.results()[1], "R_fillet")
 148 SketchLine_82 = Sketch_3.addLine(0.5, 15.5, 0.5, 16)
 149 SketchConstraintCoincidence_44 = Sketch_3.setCoincident(SketchArc_61.endPoint(), SketchLine_82.startPoint())
 150 SketchLine_83 = Sketch_3.addLine(0.5, 16, -0.5, 16)
 151 SketchConstraintCoincidence_45 = Sketch_3.setCoincident(SketchLine_82.endPoint(), SketchLine_83.startPoint())
 152 SketchLine_84 = Sketch_3.addLine(-0.5, 16, -0.5, 15)
 153 SketchConstraintCoincidence_46 = Sketch_3.setCoincident(SketchLine_83.endPoint(), SketchLine_84.startPoint())
 154 SketchLine_85 = Sketch_3.addLine(-0.5, 15, 0, 15)
 155 SketchConstraintCoincidence_47 = Sketch_3.setCoincident(SketchLine_84.endPoint(), SketchLine_85.startPoint())
 156 SketchConstraintCoincidence_48 = Sketch_3.setCoincident(SketchLine_79.endPoint(), SketchLine_85.endPoint())
 157 SketchConstraintCoincidence_49 = Sketch_3.setCoincident(SketchLine_80.startPoint(), SketchLine_85.endPoint())
 158 SketchConstraintCoincidence_50 = Sketch_3.setCoincident(SketchArc_61.startPoint(), SketchLine_85.endPoint())
 159 SketchConstraintCoincidence_51 = Sketch_3.setCoincident(SketchLine_81.endPoint(), SketchLine_83.startPoint())
 160 SketchConstraintCoincidence_52 = Sketch_3.setCoincident(SketchLine_85.startPoint(), SketchLine_80.result())
 161 SketchConstraintVertical_9 = Sketch_3.setVertical(SketchLine_84.result())
 162 SketchConstraintHorizontal_6 = Sketch_3.setHorizontal(SketchLine_83.result())
 163 SketchConstraintLength_9 = Sketch_3.setLength(SketchLine_84.result(), "2*R_fillet")
 164 SketchConstraintLength_10 = Sketch_3.setLength(SketchLine_83.result(), "2*R_fillet")
 165 model.do()
 166 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "PartSet/Sketch_1")], model.selection("EDGE", "PartSet/Sketch_1/Edge-SketchLine_1"), 360, 0)
 167 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face_1"))
 168 SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "PartSet/Origin"))
 169 SketchLine_86 = Sketch_4.addLine(0, -13.49999999999519, 3.1, -13.49999999999519)
 170 SketchLine_87 = Sketch_4.addLine(model.selection("EDGE", "PartSet/OZ"))
 171 SketchConstraintCoincidence_51 = Sketch_4.setCoincident(SketchLine_86.startPoint(), SketchLine_87.result())
 172 SketchLine_88 = Sketch_4.addLine(3.1, -13.49999999999519, 3.1, -10.55414610473955)
 173 SketchConstraintCoincidence_52 = Sketch_4.setCoincident(SketchLine_86.endPoint(), SketchLine_88.startPoint())
 174 SketchLine_89 = Sketch_4.addLine(0, -10.5290802744499, 0, 12.80434395246332)
 175 SketchLine_89.setAuxiliary(True)
 176 SketchConstraintCoincidence_53 = Sketch_4.setCoincident(SketchLine_89.startPoint(), SketchLine_87.result())
 177 SketchConstraintVertical_9 = Sketch_4.setVertical(SketchLine_89.result())
 178 SketchConstraintHorizontal_6 = Sketch_4.setHorizontal(SketchLine_86.result())
 179 SketchConstraintVertical_10 = Sketch_4.setVertical(SketchLine_88.result())
 180 SketchConstraintLength_9 = Sketch_4.setLength(SketchLine_86.result(), 3.1)
 181 SketchConstraintMirror_2 = Sketch_4.addMirror(SketchLine_87.result(), [SketchLine_86.result(), SketchLine_88.result()])
 182 [SketchLine_90, SketchLine_91] = SketchConstraintMirror_2.mirrored()
 183 SketchArc_62 = Sketch_4.addArc(0, 0, 3.1, -10.55414610473955, -3.100000000000001, -10.55414610473344, False)
 184 SketchConstraintCoincidence_54 = Sketch_4.setCoincident(SketchPoint_4.coordinates(), SketchArc_62.center())
 185 SketchConstraintCoincidence_55 = Sketch_4.setCoincident(SketchLine_87.startPoint(), SketchArc_62.center())
 186 SketchConstraintCoincidence_56 = Sketch_4.setCoincident(SketchArc_62.startPoint(), SketchLine_88.result())
 187 SketchConstraintCoincidence_57 = Sketch_4.setCoincident(SketchArc_62.endPoint(), SketchLine_91.result())
 188 SketchConstraintRadius_4 = Sketch_4.setRadius(SketchArc_62.results()[1], 11)
 189 SketchConstraintCoincidence_58 = Sketch_4.setCoincident(SketchLine_88.endPoint(), SketchArc_62.startPoint())
 190 SketchPoint_5 = Sketch_4.addPoint(3.1, -10.55414610473955)
 191 SketchConstraintCoincidence_59 = Sketch_4.setCoincident(SketchLine_88.endPoint(), SketchPoint_5.coordinates())
 192 SketchConstraintCoincidence_60 = Sketch_4.setCoincident(SketchArc_62.startPoint(), SketchPoint_5.coordinates())
 193 SketchPoint_6 = Sketch_4.addPoint(0, 11.00000000000481)
 194 SketchPoint_6.setAuxiliary(True)
 195 SketchConstraintCoincidence_61 = Sketch_4.setCoincident(SketchPoint_6.coordinates(), SketchArc_62.results()[1])
 196 SketchConstraintCoincidence_62 = Sketch_4.setCoincident(SketchPoint_6.coordinates(), SketchLine_89.result())
 197 SketchConstraintDistance_6 = Sketch_4.setDistance(SketchPoint_6.coordinates(), SketchLine_86.result(), 24.5)
 198 model.do()
 199 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), model.selection("FACE", "Revolution_1_1/Generated_Face_5"), 0, model.selection(), 0, [model.selection("SOLID", "Revolution_1_1")])
 200 RevolutionCut_1 = model.addRevolutionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection("EDGE", "PartSet/OX"), 0, 360, [model.selection("SOLID", "ExtrusionCut_1_1")])
 201 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 0, 5, [model.selection("SOLID", "RevolutionCut_1_1")])
 202 model.do()
 203
 204 # Test reexecution after parameter change
 205 Parameter_R.setValue(16)
 206 model.do()
 207 model.testResultsVolumes(ExtrusionCut_2, [64060.674439985647040884941816330])
 208 Parameter_R.setValue(15)
 209 model.end()
 210
 211 from GeomAPI import GeomAPI_Shape
 212
 213 model.testNbResults(ExtrusionCut_2, 1)
 214 model.testNbSubResults(ExtrusionCut_2, [0])
 215 model.testNbSubShapes(ExtrusionCut_2, GeomAPI_Shape.SOLID, [1])
 216 model.testNbSubShapes(ExtrusionCut_2, GeomAPI_Shape.FACE, [224])
 217 model.testNbSubShapes(ExtrusionCut_2, GeomAPI_Shape.EDGE, [1314])
 218 model.testNbSubShapes(ExtrusionCut_2, GeomAPI_Shape.VERTEX, [2628])
 219 model.testResultsVolumes(ExtrusionCut_2, [62405.392187037912663072347640991])
 220
 221 assert(model.checkPythonDump())