test.models/gear.py

   1 # Copyright (C) 2014-2020  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from SketchAPI import *
  21
  22 from salome.shaper import model
  23
  24 model.begin()
  25 partSet = model.moduleDocument()
  26 Parameter_R = model.addParameter(partSet, "R", "15.5")
  27 Sketch_1 = model.addSketch(partSet, model.defaultPlane("XOY"))
  28 SketchLine_1 = Sketch_1.addLine(0, 0, 30, 0)
  29 SketchPoint_1 = Sketch_1.addPoint(model.selection("VERTEX", "Origin"))
  30 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchPoint_1.result())
  31 SketchLine_2 = Sketch_1.addLine(model.selection("EDGE", "OX"))
  32 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.result())
  33 SketchLine_3 = Sketch_1.addLine(30, 0, 30, 37.5)
  34 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
  35 SketchLine_4 = Sketch_1.addLine(30, 37.5, 17, 37.5)
  36 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  37 SketchLine_5 = Sketch_1.addLine(17, 37.5, 17, 15.5)
  38 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  39 SketchLine_6 = Sketch_1.addLine(17, 15.5, 0, 15.5)
  40 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  41 SketchLine_7 = Sketch_1.addLine(model.selection("EDGE", "OY"))
  42 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.result())
  43 SketchLine_8 = Sketch_1.addLine(0, 15.5, 0, 0)
  44 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_8.startPoint())
  45 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_4.result())
  46 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_3.result())
  47 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_5.result())
  48 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_6.result())
  49 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_1.endPoint(), SketchLine_8.result(), 30)
  50 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_3.result(), 37.5)
  51 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_8.result(), "R")
  52 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchPoint_1.coordinates())
  53 SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_4.result(), 13)
  54 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_1.startPoint())
  55 model.do()
  56 Part_1 = model.addPart(partSet)
  57 Part_1_doc = Part_1.document()
  58 model.addParameter(Part_1_doc, "R_fillet", "0.5")
  59 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
  60 SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "PartSet/Origin"))
  61 SketchLine_9 = Sketch_2.addLine(0, 0, 0, 45.59203984275747)
  62 SketchLine_9.setAuxiliary(True)
  63 SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchPoint_2.coordinates(), SketchLine_9.startPoint())
  64 SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_9.result())
  65 SketchLine_10 = Sketch_2.addLine(-2.5, 37.41657386773942, -0.9611800001338426, 34.11656372860793)
  66 SketchArc_1 = Sketch_2.addArc(0, 34.39248583236681, -0.9611800001338426, 34.11656372860793, 0, 33.39248583236681, False)
  67 SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchArc_1.startPoint())
  68 SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchArc_1.center(), SketchLine_9.result())
  69 SketchConstraintAngle_1 = Sketch_2.setAngleBackward(SketchLine_10.result(), SketchLine_9.result(), 205)
  70 SketchConstraintRadius_1 = Sketch_2.setRadius(SketchArc_1.results()[1], 1)
  71 SketchConstraintDistance_2 = Sketch_2.setDistance(SketchLine_10.startPoint(), SketchLine_9.result(), 2.5)
  72 SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchArc_1.endPoint(), SketchLine_9.result())
  73 SketchArc_2 = Sketch_2.addArc(0, 0, -2.5, 37.41657386773942, 0, 37.5, True)
  74 SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchArc_2.center(), SketchPoint_2.result())
  75 SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_10.startPoint(), SketchArc_2.startPoint())
  76 SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_9.result(), SketchArc_2.endPoint())
  77 SketchConstraintMirror_1 = Sketch_2.addMirror(SketchLine_9.result(), [SketchLine_10.result(), SketchArc_1.results()[1], SketchArc_2.results()[1]])
  78 [SketchLine_11, SketchArc_3, SketchArc_4] = SketchConstraintMirror_1.mirrored()
  79 SketchMultiRotation_1_objects = [SketchArc_1.results()[1], SketchLine_10.result(), SketchArc_2.results()[1], SketchArc_3.results()[1], SketchLine_11.result(), SketchArc_4.results()[1]]
  80 SketchMultiRotation_1 = Sketch_2.addRotation(SketchMultiRotation_1_objects, SketchArc_2.center(), 12, 30)
  81 SketchConstraintRadius_2 = Sketch_2.setRadius(SketchArc_2.results()[1], 37.5)
  82 model.do()
  83 Sketch_3 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  84 SketchLine_70 = Sketch_3.addLine(0, 0, 30, 0)
  85 SketchLine_70.setAuxiliary(True)
  86 SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "PartSet/Origin"))
  87 SketchConstraintCoincidence_18 = Sketch_3.setCoincident(SketchLine_70.startPoint(), SketchPoint_3.result())
  88 SketchLine_71 = Sketch_3.addLine(30, 0, 30, 37.5)
  89 SketchLine_71.setAuxiliary(True)
  90 SketchConstraintCoincidence_19 = Sketch_3.setCoincident(SketchLine_70.endPoint(), SketchLine_71.startPoint())
  91 SketchLine_72 = Sketch_3.addLine(30, 37.5, 17, 37.5)
  92 SketchLine_72.setAuxiliary(True)
  93 SketchConstraintCoincidence_20 = Sketch_3.setCoincident(SketchLine_71.endPoint(), SketchLine_72.startPoint())
  94 SketchConstraintHorizontal_3 = Sketch_3.setHorizontal(SketchLine_72.result())
  95 SketchConstraintHorizontal_4 = Sketch_3.setHorizontal(SketchLine_70.result())
  96 SketchConstraintVertical_5 = Sketch_3.setVertical(SketchLine_71.result())
  97 SketchConstraintLength_4 = Sketch_3.setLength(SketchLine_70.result(), 30)
  98 SketchConstraintLength_5 = Sketch_3.setLength(SketchLine_71.result(), 37.5)
  99 SketchConstraintLength_6 = Sketch_3.setLength(SketchLine_72.result(), 13)
 100 SketchLine_73 = Sketch_3.addLine(29, 37.49999999999999, 30, 36.49999999999999)
 101 SketchConstraintCoincidence_21 = Sketch_3.setCoincident(SketchLine_73.startPoint(), SketchLine_72.result())
 102 SketchConstraintCoincidence_22 = Sketch_3.setCoincident(SketchLine_73.endPoint(), SketchLine_71.result())
 103 SketchLine_74 = Sketch_3.addLine(17, 37.5, 17, 36.5)
 104 SketchLine_75 = Sketch_3.addLine(17, 36.5, 17.99999999999994, 37.5)
 105 SketchConstraintCoincidence_23 = Sketch_3.setCoincident(SketchLine_74.endPoint(), SketchLine_75.startPoint())
 106 SketchConstraintCoincidence_24 = Sketch_3.setCoincident(SketchLine_75.endPoint(), SketchLine_72.result())
 107 SketchConstraintCoincidence_25 = Sketch_3.setCoincident(SketchLine_72.endPoint(), SketchLine_74.startPoint())
 108 SketchConstraintVertical_6 = Sketch_3.setVertical(SketchLine_74.result())
 109 SketchConstraintLength_7 = Sketch_3.setLength(SketchLine_74.result(), 1)
 110 SketchConstraintDistance_3 = Sketch_3.setDistance(SketchLine_75.endPoint(), SketchLine_74.result(), 1)
 111 SketchConstraintDistance_4 = Sketch_3.setDistance(SketchLine_73.startPoint(), SketchLine_71.result(), 1)
 112 SketchConstraintDistance_5 = Sketch_3.setDistance(SketchLine_73.endPoint(), SketchLine_72.result(), 1)
 113 SketchLine_76 = Sketch_3.addLine(17, 37.5, 17.99999999999994, 37.5)
 114 SketchConstraintCoincidence_26 = Sketch_3.setCoincident(SketchLine_72.endPoint(), SketchLine_76.startPoint())
 115 SketchConstraintCoincidence_27 = Sketch_3.setCoincident(SketchLine_74.startPoint(), SketchLine_76.startPoint())
 116 SketchConstraintCoincidence_28 = Sketch_3.setCoincident(SketchLine_75.endPoint(), SketchLine_76.endPoint())
 117 SketchLine_77 = Sketch_3.addLine(29, 37.49999999999999, 30, 37.5)
 118 SketchConstraintCoincidence_29 = Sketch_3.setCoincident(SketchLine_73.startPoint(), SketchLine_77.startPoint())
 119 SketchConstraintCoincidence_30 = Sketch_3.setCoincident(SketchLine_71.endPoint(), SketchLine_77.endPoint())
 120 SketchConstraintCoincidence_31 = Sketch_3.setCoincident(SketchLine_72.startPoint(), SketchLine_77.endPoint())
 121 SketchLine_78 = Sketch_3.addLine(30, 37.5, 30, 36.49999999999999)
 122 SketchConstraintCoincidence_32 = Sketch_3.setCoincident(SketchLine_71.endPoint(), SketchLine_78.startPoint())
 123 SketchConstraintCoincidence_33 = Sketch_3.setCoincident(SketchLine_72.startPoint(), SketchLine_78.startPoint())
 124 SketchConstraintCoincidence_34 = Sketch_3.setCoincident(SketchLine_77.endPoint(), SketchLine_78.startPoint())
 125 SketchConstraintCoincidence_35 = Sketch_3.setCoincident(SketchLine_73.endPoint(), SketchLine_78.endPoint())
 126 SketchLine_79 = Sketch_3.addLine(0, 0, 0, 15)
 127 SketchLine_79.setAuxiliary(True)
 128 SketchConstraintCoincidence_36 = Sketch_3.setCoincident(SketchLine_79.startPoint(), SketchPoint_3.result())
 129 SketchConstraintVertical_7 = Sketch_3.setVertical(SketchLine_79.result())
 130 SketchConstraintLength_8 = Sketch_3.setLength(SketchLine_79.result(), "R-R_fillet")
 131 SketchLine_80 = Sketch_3.addLine(0, 15, 0.5, 15)
 132 SketchLine_80.setAuxiliary(True)
 133 SketchConstraintCoincidence_37 = Sketch_3.setCoincident(SketchLine_79.endPoint(), SketchLine_80.startPoint())
 134 SketchConstraintHorizontal_5 = Sketch_3.setHorizontal(SketchLine_80.result())
 135 SketchArc_61 = Sketch_3.addArc(0.5, 15, 0, 15, 0.5, 15.5, True)
 136 SketchConstraintCoincidence_38 = Sketch_3.setCoincident(SketchLine_80.endPoint(), SketchArc_61.center())
 137 SketchConstraintCoincidence_39 = Sketch_3.setCoincident(SketchLine_79.endPoint(), SketchArc_61.startPoint())
 138 SketchConstraintCoincidence_40 = Sketch_3.setCoincident(SketchLine_80.startPoint(), SketchArc_61.startPoint())
 139 SketchLine_81 = Sketch_3.addLine(0.5, 15, 0.5, 16)
 140 SketchLine_81.setAuxiliary(True)
 141 SketchConstraintCoincidence_41 = Sketch_3.setCoincident(SketchLine_80.endPoint(), SketchLine_81.startPoint())
 142 SketchConstraintCoincidence_42 = Sketch_3.setCoincident(SketchArc_61.center(), SketchLine_81.startPoint())
 143 SketchConstraintVertical_8 = Sketch_3.setVertical(SketchLine_81.result())
 144 SketchConstraintCoincidence_43 = Sketch_3.setCoincident(SketchArc_61.endPoint(), SketchLine_81.result())
 145 SketchConstraintRadius_3 = Sketch_3.setRadius(SketchArc_61.results()[1], "R_fillet")
 146 SketchLine_82 = Sketch_3.addLine(0.5, 15.5, 0.5, 16)
 147 SketchConstraintCoincidence_44 = Sketch_3.setCoincident(SketchArc_61.endPoint(), SketchLine_82.startPoint())
 148 SketchLine_83 = Sketch_3.addLine(0.5, 16, -0.5, 16)
 149 SketchConstraintCoincidence_45 = Sketch_3.setCoincident(SketchLine_82.endPoint(), SketchLine_83.startPoint())
 150 SketchLine_84 = Sketch_3.addLine(-0.5, 16, -0.5, 15)
 151 SketchConstraintCoincidence_46 = Sketch_3.setCoincident(SketchLine_83.endPoint(), SketchLine_84.startPoint())
 152 SketchLine_85 = Sketch_3.addLine(-0.5, 15, 0, 15)
 153 SketchConstraintCoincidence_47 = Sketch_3.setCoincident(SketchLine_84.endPoint(), SketchLine_85.startPoint())
 154 SketchConstraintCoincidence_48 = Sketch_3.setCoincident(SketchLine_79.endPoint(), SketchLine_85.endPoint())
 155 SketchConstraintCoincidence_49 = Sketch_3.setCoincident(SketchLine_80.startPoint(), SketchLine_85.endPoint())
 156 SketchConstraintCoincidence_50 = Sketch_3.setCoincident(SketchArc_61.startPoint(), SketchLine_85.endPoint())
 157 SketchConstraintCoincidence_51 = Sketch_3.setCoincident(SketchLine_81.endPoint(), SketchLine_83.startPoint())
 158 SketchConstraintCoincidence_52 = Sketch_3.setCoincident(SketchLine_85.startPoint(), SketchLine_80.result())
 159 SketchConstraintVertical_9 = Sketch_3.setVertical(SketchLine_84.result())
 160 SketchConstraintHorizontal_6 = Sketch_3.setHorizontal(SketchLine_83.result())
 161 SketchConstraintLength_9 = Sketch_3.setLength(SketchLine_84.result(), "2*R_fillet")
 162 SketchConstraintLength_10 = Sketch_3.setLength(SketchLine_83.result(), "2*R_fillet")
 163 model.do()
 164 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("COMPOUND", "PartSet/Sketch_1")], model.selection("EDGE", "PartSet/Sketch_1/SketchLine_1"), 360, 0)
 165 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face&PartSet/Sketch_1/SketchLine_8"))
 166 SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "PartSet/Origin"))
 167 SketchLine_86 = Sketch_4.addLine(0, -13.49999999999519, 3.1, -13.49999999999519)
 168 SketchLine_87 = Sketch_4.addLine(model.selection("EDGE", "PartSet/OZ"))
 169 SketchConstraintCoincidence_51 = Sketch_4.setCoincident(SketchLine_86.startPoint(), SketchLine_87.result())
 170 SketchLine_88 = Sketch_4.addLine(3.1, -13.49999999999519, 3.1, -10.55414610473955)
 171 SketchConstraintCoincidence_52 = Sketch_4.setCoincident(SketchLine_86.endPoint(), SketchLine_88.startPoint())
 172 SketchLine_89 = Sketch_4.addLine(0, -10.5290802744499, 0, 12.80434395246332)
 173 SketchLine_89.setAuxiliary(True)
 174 SketchConstraintCoincidence_53 = Sketch_4.setCoincident(SketchLine_89.startPoint(), SketchLine_87.result())
 175 SketchConstraintVertical_9 = Sketch_4.setVertical(SketchLine_89.result())
 176 SketchConstraintHorizontal_6 = Sketch_4.setHorizontal(SketchLine_86.result())
 177 SketchConstraintVertical_10 = Sketch_4.setVertical(SketchLine_88.result())
 178 SketchConstraintLength_9 = Sketch_4.setLength(SketchLine_86.result(), 3.1)
 179 SketchConstraintMirror_2 = Sketch_4.addMirror(SketchLine_87.result(), [SketchLine_86.result(), SketchLine_88.result()])
 180 [SketchLine_90, SketchLine_91] = SketchConstraintMirror_2.mirrored()
 181 SketchArc_62 = Sketch_4.addArc(0, 0, 3.1, -10.55414610473955, -3.100000000000001, -10.55414610473344, False)
 182 SketchConstraintCoincidence_54 = Sketch_4.setCoincident(SketchPoint_4.coordinates(), SketchArc_62.center())
 183 SketchConstraintCoincidence_55 = Sketch_4.setCoincident(SketchLine_87.startPoint(), SketchArc_62.center())
 184 SketchConstraintCoincidence_56 = Sketch_4.setCoincident(SketchArc_62.startPoint(), SketchLine_88.result())
 185 SketchConstraintCoincidence_57 = Sketch_4.setCoincident(SketchArc_62.endPoint(), SketchLine_91.result())
 186 SketchConstraintRadius_4 = Sketch_4.setRadius(SketchArc_62.results()[1], 11)
 187 SketchConstraintCoincidence_58 = Sketch_4.setCoincident(SketchLine_88.endPoint(), SketchArc_62.startPoint())
 188 SketchPoint_5 = Sketch_4.addPoint(3.1, -10.55414610473955)
 189 SketchConstraintCoincidence_59 = Sketch_4.setCoincident(SketchLine_88.endPoint(), SketchPoint_5.coordinates())
 190 SketchConstraintCoincidence_60 = Sketch_4.setCoincident(SketchArc_62.startPoint(), SketchPoint_5.coordinates())
 191 SketchPoint_6 = Sketch_4.addPoint(0, 11.00000000000481)
 192 SketchPoint_6.setAuxiliary(True)
 193 SketchConstraintCoincidence_61 = Sketch_4.setCoincident(SketchPoint_6.coordinates(), SketchArc_62.results()[1])
 194 SketchConstraintCoincidence_62 = Sketch_4.setCoincident(SketchPoint_6.coordinates(), SketchLine_89.result())
 195 SketchConstraintDistance_6 = Sketch_4.setDistance(SketchPoint_6.coordinates(), SketchLine_86.result(), 24.5)
 196 model.do()
 197 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), model.selection("FACE", "Revolution_1_1/Generated_Face&PartSet/Sketch_1/SketchLine_3"), 0, model.selection(), 0, [model.selection("SOLID", "Revolution_1_1")])
 198 RevolutionCut_1 = model.addRevolutionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection("EDGE", "PartSet/OX"), 0, 360, [model.selection("SOLID", "ExtrusionCut_1_1")])
 199 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 0, 5, [model.selection("SOLID", "RevolutionCut_1_1")])
 200 model.do()
 201
 202 # Test reexecution after parameter change
 203 Parameter_R.setValue(16)
 204 model.do()
 205 model.testResultsVolumes(ExtrusionCut_2, [64060.674439985647040884941816330])
 206 Parameter_R.setValue(15)
 207 model.end()
 208
 209 from GeomAPI import GeomAPI_Shape
 210
 211 model.testNbResults(ExtrusionCut_2, 1)
 212 model.testNbSubResults(ExtrusionCut_2, [0])
 213 model.testNbSubShapes(ExtrusionCut_2, GeomAPI_Shape.SOLID, [1])
 214 model.testNbSubShapes(ExtrusionCut_2, GeomAPI_Shape.FACE, [224])
 215 model.testNbSubShapes(ExtrusionCut_2, GeomAPI_Shape.EDGE, [1314])
 216 model.testNbSubShapes(ExtrusionCut_2, GeomAPI_Shape.VERTEX, [2628])
 217 model.testResultsVolumes(ExtrusionCut_2, [62405.392187037912663072347640991])
 218
 219 assert(model.checkPythonDump())