test.models/flange.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 from salome.shaper import model
  22
  23 model.begin()
  24 partSet = model.moduleDocument()
  25 Part_1 = model.addPart(partSet)
  26 Part_1_doc = Part_1.document()
  27 model.addParameter(Part_1_doc, "dint", "58")
  28 model.addParameter(Part_1_doc, "thick", "16")
  29 model.addParameter(Part_1_doc, "length", "172")
  30 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
  31 SketchLine_1 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OZ"))
  32 SketchArc_1 = Sketch_1.addArc(-1.656176621148808e-020, 61, -36.69142117459658, 34.94736842105263, -1.927105092898643e-024, 106, True)
  33 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.result(), SketchArc_1.center())
  34 SketchLine_2 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OX"))
  35 SketchLine_3 = Sketch_1.addLine(-46.47580015448901, 16.00000000000001, -86, 16)
  36 SketchLine_4 = Sketch_1.addLine(-86, 16, -86, -1.232595164407831e-032)
  37 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  38 SketchLine_5 = Sketch_1.addLine(-86, -1.232595164407831e-032, -46.47580015448901, 7.497132070176856e-024)
  39 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  40 SketchArc_2 = Sketch_1.addArc(5.604803279647422e-025, 61, -23.64558253474002, 44.21052631578948, -7.759334428649666e-022, 90, True)
  41 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchArc_1.center(), SketchArc_2.center())
  42 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_3.result())
  43 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_5.result())
  44 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_4.result())
  45 SketchArc_3 = Sketch_1.addArc(-46.47580015448901, 28.00000000000001, -36.69142117459658, 34.94736842105264, -46.47580015448901, 16.00000000000001, True)
  46 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchArc_3.startPoint())
  47 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchArc_3.endPoint())
  48 SketchArc_4 = Sketch_1.addArc(-46.475800154489, 28, -23.64558253474002, 44.21052631578947, -46.475800154489, -2.594279994652913e-031, True)
  49 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchArc_4.startPoint())
  50 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchArc_4.endPoint(), SketchLine_5.endPoint())
  51 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_3.results()[1], 12)
  52 SketchConstraintRadius_1.setName("SketchConstraintRadius_3")
  53 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchArc_3.results()[1])
  54 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_3.results()[1], SketchLine_3.result())
  55 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchArc_4.center(), SketchArc_3.center())
  56 SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_4.results()[1], SketchLine_5.result())
  57 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchArc_2.center(), SketchLine_5.result(), 61)
  58 SketchConstraintTangent_4 = Sketch_1.setTangent(SketchArc_4.results()[1], SketchArc_2.results()[1])
  59 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_5.result())
  60 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_4.result(), "thick")
  61 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.result())
  62 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_1.result())
  63 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_1.startPoint(), SketchLine_4.result(), "length/2")
  64 SketchConstraintMirror_1_objects = [SketchArc_2.results()[1], SketchArc_4.results()[1], SketchLine_5.result(), SketchLine_4.result(), SketchLine_3.result(), SketchArc_3.results()[1], SketchArc_1.results()[1]]
  65 SketchConstraintMirror_1 = Sketch_1.addMirror(SketchLine_1.result(), SketchConstraintMirror_1_objects)
  66 [SketchArc_5, SketchArc_6, SketchLine_6, SketchLine_7, SketchLine_8, SketchArc_7, SketchArc_8] = SketchConstraintMirror_1.mirrored()
  67 SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_2.results()[1], "dint/2")
  68 SketchConstraintRadius_2.setName("SketchConstraintRadius_5")
  69 model.do()
  70 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchArc_1_2f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchArc_2_2r-SketchArc_3_2r-SketchArc_4_2f-SketchArc_5_2r-SketchArc_6_2f-SketchLine_6r-SketchLine_7r-SketchLine_8r-SketchArc_7_2r-SketchArc_8_2f")], model.selection(), 35, 35)
  71 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
  72 SketchArc_9 = Sketch_2.addArc(-0.6283186887989762, 106, 0, 78.00705060867459, 0, 133.9929493913254, True)
  73 SketchConstraintRadius_3 = Sketch_2.setRadius(SketchArc_9.results()[1], 28)
  74 SketchConstraintRadius_3.setName("SketchConstraintRadius_4")
  75 SketchLine_9 = Sketch_2.addLine(model.selection("EDGE", "PartSet/OX"))
  76 SketchConstraintDistance_3 = Sketch_2.setDistance(SketchArc_9.center(), SketchLine_9.result(), "61+dint/2+thick")
  77 SketchLine_10 = Sketch_2.addLine(model.selection("EDGE", "PartSet/OZ"))
  78 SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchArc_9.startPoint(), SketchLine_10.result())
  79 SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchArc_9.endPoint(), SketchLine_10.result())
  80 SketchLine_11 = Sketch_2.addLine(0, 78.00705060867459, 0, 133.9929493913254)
  81 SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchArc_9.startPoint(), SketchLine_11.startPoint())
  82 SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchArc_9.endPoint(), SketchLine_11.endPoint())
  83 model.do()
  84 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_9_2f-SketchLine_11f")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
  85 Boolean_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Revolution_1_1")])
  86 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/YOZ"))
  87 SketchLine_12 = Sketch_3.addLine(2.220446049250313e-016, 106, -4, 106)
  88 SketchLine_13 = Sketch_3.addLine(-4, 106, -4, 67.34428877022477)
  89 SketchConstraintCoincidence_17 = Sketch_3.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
  90 SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_18")
  91 SketchConstraintHorizontal_3 = Sketch_3.setHorizontal(SketchLine_12.result())
  92 SketchConstraintVertical_2 = Sketch_3.setVertical(SketchLine_13.result())
  93 SketchPoint_1 = Sketch_3.addPoint(model.selection("VERTEX", "PartSet/Origin"))
  94 SketchConstraintDistance_4 = Sketch_3.setDistance(SketchPoint_1.coordinates(), SketchLine_12.result(), "61+90/2")
  95 SketchConstraintDistance_4.setName("SketchConstraintDistance_5")
  96 SketchLine_14 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OZ"))
  97 SketchLine_14.setName("SketchLine_15")
  98 SketchLine_14.result().setName("SketchLine_15")
  99 SketchConstraintCoincidence_18 = Sketch_3.setCoincident(SketchLine_12.startPoint(), SketchLine_14.result())
 100 SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_20")
 101 SketchConstraintLength_2 = Sketch_3.setLength(SketchLine_12.result(), "8/2")
 102 SketchArc_10 = Sketch_3.addArc(0, 61, -4, 67.34428877022477, 4, 67.34428877022477, False)
 103 SketchConstraintCoincidence_19 = Sketch_3.setCoincident(SketchLine_14.result(), SketchArc_10.center())
 104 SketchConstraintRadius_4 = Sketch_3.setRadius(SketchArc_10.results()[1], "15/2")
 105 SketchConstraintRadius_4.setName("SketchConstraintRadius_6")
 106 SketchLine_15 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OY"))
 107 SketchLine_15.setName("SketchLine_16")
 108 SketchLine_15.result().setName("SketchLine_16")
 109 SketchConstraintDistance_5 = Sketch_3.setDistance(SketchArc_10.center(), SketchLine_15.result(), 61)
 110 SketchConstraintDistance_5.setName("SketchConstraintDistance_6")
 111 SketchConstraintCoincidence_20 = Sketch_3.setCoincident(SketchLine_13.endPoint(), SketchArc_10.startPoint())
 112 SketchConstraintCoincidence_20.setName("SketchConstraintCoincidence_21")
 113 SketchConstraintMirror_2 = Sketch_3.addMirror(SketchLine_14.result(), [SketchLine_13.result(), SketchLine_12.result()])
 114 [SketchLine_16, SketchLine_17] = SketchConstraintMirror_2.mirrored()
 115 SketchLine_17.setName("SketchLine_18")
 116 SketchLine_17.result().setName("SketchLine_18")
 117 SketchLine_16.setName("SketchLine_17")
 118 SketchLine_16.result().setName("SketchLine_17")
 119 SketchConstraintCoincidence_21 = Sketch_3.setCoincident(SketchArc_10.endPoint(), SketchLine_16.result())
 120 SketchConstraintCoincidence_21.setName("SketchConstraintCoincidence_22")
 121 model.do()
 122 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchLine_12f-SketchLine_13f-SketchLine_17r-SketchLine_18r-SketchArc_10_2f")], model.selection(), "172/2", "172/2")
 123 Boolean_2 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
 124 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"))
 125 SketchLine_18 = Sketch_4.addLine(-65, 16, -65, -16)
 126 SketchLine_18.setName("SketchLine_19")
 127 SketchLine_18.result().setName("SketchLine_19")
 128 SketchLine_18.setAuxiliary(True)
 129 SketchConstraintVertical_3 = Sketch_4.setVertical(SketchLine_18.result())
 130 SketchConstraintLength_3 = Sketch_4.setLength(SketchLine_18.result(), 32)
 131 SketchPoint_2 = Sketch_4.addPoint(model.selection("VERTEX", "PartSet/Origin"))
 132 SketchConstraintDistance_6 = Sketch_4.setDistance(SketchPoint_2.coordinates(), SketchLine_18.result(), "130/2")
 133 SketchConstraintDistance_6.setName("SketchConstraintDistance_7")
 134 SketchPoint_3 = Sketch_4.addPoint(-65, 0)
 135 SketchPoint_3.setAuxiliary(True)
 136 SketchConstraintMiddle_1 = Sketch_4.setMiddlePoint(SketchPoint_3.coordinates(), SketchLine_18.result())
 137 SketchLine_19 = Sketch_4.addLine(model.selection("EDGE", "PartSet/OX"))
 138 SketchLine_19.setName("SketchLine_20")
 139 SketchLine_19.result().setName("SketchLine_20")
 140 SketchConstraintCoincidence_22 = Sketch_4.setCoincident(SketchPoint_3.coordinates(), SketchLine_19.result())
 141 SketchConstraintCoincidence_22.setName("SketchConstraintCoincidence_23")
 142 SketchArc_11 = Sketch_4.addArc(-65, 16, -59, 16, -71, 16, False)
 143 SketchConstraintCoincidence_23 = Sketch_4.setCoincident(SketchLine_18.startPoint(), SketchArc_11.center())
 144 SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_24")
 145 SketchArc_12 = Sketch_4.addArc(-65, -16, -59, -16.00003459934639, -71, -16, True)
 146 SketchConstraintCoincidence_24 = Sketch_4.setCoincident(SketchLine_18.endPoint(), SketchArc_12.center())
 147 SketchConstraintCoincidence_24.setName("SketchConstraintCoincidence_25")
 148 SketchConstraintRadius_5 = Sketch_4.setRadius(SketchArc_11.results()[1], 6)
 149 SketchConstraintRadius_5.setName("SketchConstraintRadius_7")
 150 SketchLine_20 = Sketch_4.addLine(-71, 16, -71, -16)
 151 SketchLine_20.setName("SketchLine_21")
 152 SketchLine_20.result().setName("SketchLine_21")
 153 SketchConstraintCoincidence_25 = Sketch_4.setCoincident(SketchArc_11.endPoint(), SketchLine_20.startPoint())
 154 SketchConstraintCoincidence_25.setName("SketchConstraintCoincidence_26")
 155 SketchConstraintCoincidence_26 = Sketch_4.setCoincident(SketchArc_12.endPoint(), SketchLine_20.endPoint())
 156 SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_27")
 157 SketchLine_21 = Sketch_4.addLine(-59, 16, -59, -16.00003459934639)
 158 SketchLine_21.setName("SketchLine_22")
 159 SketchLine_21.result().setName("SketchLine_22")
 160 SketchConstraintCoincidence_27 = Sketch_4.setCoincident(SketchArc_11.startPoint(), SketchLine_21.startPoint())
 161 SketchConstraintCoincidence_27.setName("SketchConstraintCoincidence_28")
 162 SketchConstraintCoincidence_28 = Sketch_4.setCoincident(SketchArc_12.startPoint(), SketchLine_21.endPoint())
 163 SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_29")
 164 SketchConstraintVertical_4 = Sketch_4.setVertical(SketchLine_20.result())
 165 SketchConstraintVertical_5 = Sketch_4.setVertical(SketchLine_21.result())
 166 SketchConstraintTangent_5 = Sketch_4.setTangent(SketchLine_20.result(), SketchArc_11.results()[1])
 167 SketchConstraintTangent_6 = Sketch_4.setTangent(SketchLine_21.result(), SketchArc_11.results()[1])
 168 SketchConstraintTangent_7 = Sketch_4.setTangent(SketchArc_12.results()[1], SketchLine_20.result())
 169 model.do()
 170 Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Wire-SketchArc_11_2f-SketchArc_12_2f-SketchLine_21f-SketchLine_22r")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face_2"), 0)
 171 MultiTranslation_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1")], model.selection("EDGE", "Extrusion_1_1/To_Face_1&Extrusion_1_1/Generated_Face_2"), -130, 2)
 172 Boolean_3 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_2_1")], [model.selection("COMPOUND", "MultiTranslation_1_1")])
 173 model.do()
 174 model.end()