Tune the parametric update in the big model test

[modules/shaper.git] / test.models / ecran.py

from SketchAPI import *

from salome.shaper import model

model.begin()
partSet = model.moduleDocument()
Part_1 = model.addPart(partSet)
Part_1_doc = Part_1.document()
Parameter_H = model.addParameter(Part_1_doc, "H", "0.3")
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
SketchLine_1 = Sketch_1.addLine(55.1, 10.3, 55.1, 0.3)
SketchLine_2 = Sketch_1.addLine(55.1, 0.3, 2.3, 0.3)
SketchLine_2.setName("SketchLine_10")
SketchLine_2.result().setName("SketchLine_10")
SketchLine_3 = Sketch_1.addLine(55.1, 0.3, 0.3, 0.3)
SketchLine_3.setName("SketchLine_2")
SketchLine_3.result().setName("SketchLine_2")
SketchLine_3.setAuxiliary(True)
SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.startPoint())
SketchLine_4 = Sketch_1.addLine(0.3, 2.3, 0.3, 10.3)
SketchLine_4.setName("SketchLine_11")
SketchLine_4.result().setName("SketchLine_11")
SketchLine_5 = Sketch_1.addLine(2.3, 0, 55.4, 0)
SketchLine_5.setName("SketchLine_12")
SketchLine_5.result().setName("SketchLine_12")
SketchLine_6 = Sketch_1.addLine(0.3, 0.3, 0.3, 10.3)
SketchLine_6.setName("SketchLine_3")
SketchLine_6.result().setName("SketchLine_3")
SketchLine_6.setAuxiliary(True)
SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_6.startPoint())
SketchLine_7 = Sketch_1.addLine(0, 10.3, 0, 2.3)
SketchLine_7.setName("SketchLine_13")
SketchLine_7.result().setName("SketchLine_13")
SketchLine_8 = Sketch_1.addLine(0.3, 10.3, 0, 10.3)
SketchLine_8.setName("SketchLine_4")
SketchLine_8.result().setName("SketchLine_4")
SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_8.startPoint())
SketchLine_9 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OZ"))
SketchLine_9.setName("SketchLine_5")
SketchLine_9.result().setName("SketchLine_5")
SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.result())
SketchLine_10 = Sketch_1.addLine(0, 10.3, 0, 0)
SketchLine_10.setName("SketchLine_6")
SketchLine_10.result().setName("SketchLine_6")
SketchLine_10.setAuxiliary(True)
SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_10.startPoint())
SketchLine_11 = Sketch_1.addLine(0, 0, 55.4, 0)
SketchLine_11.setName("SketchLine_7")
SketchLine_11.result().setName("SketchLine_7")
SketchLine_11.setAuxiliary(True)
SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
SketchLine_12 = Sketch_1.addLine(55.4, 0, 55.4, 10.3)
SketchLine_12.setName("SketchLine_8")
SketchLine_12.result().setName("SketchLine_8")
SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
SketchLine_13 = Sketch_1.addLine(55.4, 10.3, 55.1, 10.3)
SketchLine_13.setName("SketchLine_9")
SketchLine_13.result().setName("SketchLine_9")
SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_13.endPoint())
SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_13.result())
SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_8.result())
SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_3.result())
SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_11.result())
SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_1.result())
SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_12.result())
SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_6.result())
SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 10)
SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_13.result(), 0.3)
SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_3.result(), SketchLine_11.endPoint(), 0.3)
SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_8.result(), SketchLine_1.startPoint())
SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_11.result(), 55.4)
SketchConstraintLength_3.setName("SketchConstraintLength_5")
SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_10.result())
SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_8.result(), "H")
SketchArc_1 = Sketch_1.addArc(2.3, 2.3, 0.3, 2.3, 2.3, 0.3, False)
SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_4.startPoint())
SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_2.endPoint())
SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_2.result())
SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_4.result())
SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchLine_2.startPoint())
SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_4.endPoint())
SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.result())
SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_4.startPoint(), SketchLine_6.result())
SketchArc_2 = Sketch_1.addArc(2.3, 2.3, 0, 2.3, 2.3, 0, False)
SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_7.endPoint())
SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_5.startPoint())
SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_5.result())
SketchConstraintTangent_4 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_7.result())
SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchLine_5.endPoint())
SketchConstraintCoincidence_20 = Sketch_1.setCoincident(SketchLine_10.startPoint(), SketchLine_7.startPoint())
SketchConstraintCoincidence_21 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_11.result())
SketchConstraintCoincidence_22 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_10.result())
SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], 2)
SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_2.results()[1], 2.3)
SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchLine_5.result(), SketchLine_9.startPoint())
model.do()
Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_10f-SketchLine_11f-SketchLine_12f-SketchLine_13f-SketchLine_4f-SketchLine_8f-SketchLine_9f-SketchArc_1_2r-SketchArc_2_2f")], model.selection(), "307/2.", "307/2.")
Extrusion_1.setName("Profil")
Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_7"))
SketchLine_14 = Sketch_2.addLine(149.5, -2.3, 153.5, -2.3)
SketchPoint_1 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6&Extrusion_1_1/To_Face_1"))
SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchPoint_1.result())
SketchLine_15 = Sketch_2.addLine(153.5, -2.3, 153.5, 7.7)
SketchLine_16 = Sketch_2.addLine(153.5, 7.7, 149.5, 7.7)
SketchLine_17 = Sketch_2.addLine(149.5, 7.7, 149.5, -2.3)
SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchLine_17.endPoint(), SketchLine_14.startPoint())
SketchConstraintCoincidence_26 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
SketchConstraintCoincidence_27 = Sketch_2.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint())
SketchConstraintCoincidence_28 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_17.startPoint())
SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_14.result())
SketchConstraintVertical_5 = Sketch_2.setVertical(SketchLine_15.result())
SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_16.result())
SketchConstraintVertical_6 = Sketch_2.setVertical(SketchLine_17.result())
SketchLine_18 = Sketch_2.addLine(-149.5, -2.3142, -153.5, -2.3142)
SketchLine_19 = Sketch_2.addLine(-153.5, -2.3142, -153.5, 7.7)
SketchLine_20 = Sketch_2.addLine(-153.5, 7.7, -149.5, 7.7)
SketchLine_21 = Sketch_2.addLine(-149.5, 7.7, -149.5, -2.3142)
SketchConstraintCoincidence_29 = Sketch_2.setCoincident(SketchLine_21.endPoint(), SketchLine_18.startPoint())
SketchConstraintCoincidence_30 = Sketch_2.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint())
SketchConstraintCoincidence_31 = Sketch_2.setCoincident(SketchLine_19.endPoint(), SketchLine_20.startPoint())
SketchConstraintCoincidence_32 = Sketch_2.setCoincident(SketchLine_20.endPoint(), SketchLine_21.startPoint())
SketchConstraintHorizontal_7 = Sketch_2.setHorizontal(SketchLine_18.result())
SketchConstraintVertical_7 = Sketch_2.setVertical(SketchLine_19.result())
SketchConstraintHorizontal_8 = Sketch_2.setHorizontal(SketchLine_20.result())
SketchConstraintVertical_8 = Sketch_2.setVertical(SketchLine_21.result())
SketchConstraintCoincidence_33 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_20.result())
SketchConstraintLength_5 = Sketch_2.setLength(SketchLine_21.result(), 10)
SketchConstraintLength_5.setName("SketchConstraintLength_6")
SketchConstraintDistance_2 = Sketch_2.setDistance(SketchLine_16.endPoint(), SketchLine_21.result(), 299)
SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_16.result(), SketchLine_20.result())
SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6&Extrusion_1_1/From_Face_1"))
SketchPoint_2.setName("SketchPoint_4")
SketchPoint_2.result().setName("SketchPoint_4")
SketchConstraintCoincidence_34 = Sketch_2.setCoincident(SketchLine_19.startPoint(), SketchPoint_2.coordinates())
SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_39")
model.do()
ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")])
ExtrusionCut_1.setName("Decoupe_Angle")
Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_8"))
SketchLine_22 = Sketch_3.addLine(153.5, -10.3, 153.5, -8.3)
SketchLine_22.setName("SketchLine_29")
SketchLine_22.result().setName("SketchLine_29")
SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_9&ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_8"))
SketchPoint_3.setName("SketchPoint_5")
SketchPoint_3.result().setName("SketchPoint_5")
SketchConstraintCoincidence_35 = Sketch_3.setCoincident(SketchLine_22.startPoint(), SketchPoint_3.result())
SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_40")
SketchLine_23 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_8"))
SketchLine_23.setName("SketchLine_30")
SketchLine_23.result().setName("SketchLine_30")
SketchConstraintCoincidence_36 = Sketch_3.setCoincident(SketchLine_22.endPoint(), SketchLine_23.result())
SketchConstraintCoincidence_36.setName("SketchConstraintCoincidence_41")
SketchLine_24 = Sketch_3.addLine(153.5, -8.3, 151.5, -10.3)
SketchLine_24.setName("SketchLine_31")
SketchLine_24.result().setName("SketchLine_31")
SketchConstraintCoincidence_37 = Sketch_3.setCoincident(SketchLine_22.endPoint(), SketchLine_24.startPoint())
SketchConstraintCoincidence_37.setName("SketchConstraintCoincidence_42")
SketchLine_25 = Sketch_3.addLine(151.5, -10.3, 153.5, -10.3)
SketchLine_25.setName("SketchLine_33")
SketchLine_25.result().setName("SketchLine_33")
SketchConstraintCoincidence_38 = Sketch_3.setCoincident(SketchLine_24.endPoint(), SketchLine_25.startPoint())
SketchConstraintCoincidence_38.setName("SketchConstraintCoincidence_44")
SketchConstraintCoincidence_39 = Sketch_3.setCoincident(SketchLine_22.startPoint(), SketchLine_25.endPoint())
SketchConstraintCoincidence_39.setName("SketchConstraintCoincidence_45")
SketchConstraintCoincidence_40 = Sketch_3.setCoincident(SketchPoint_3.coordinates(), SketchLine_25.endPoint())
SketchConstraintCoincidence_40.setName("SketchConstraintCoincidence_46")
SketchConstraintCoincidence_41 = Sketch_3.setCoincident(SketchLine_23.endPoint(), SketchLine_25.endPoint())
SketchConstraintCoincidence_41.setName("SketchConstraintCoincidence_47")
SketchConstraintLength_6 = Sketch_3.setLength(SketchLine_25.result(), 2)
SketchConstraintLength_6.setName("SketchConstraintLength_8")
SketchConstraintAngle_1 = Sketch_3.setAngleBackward(SketchLine_24.result(), SketchLine_25.result(), 45)
SketchConstraintAngle_1.setName("SketchConstraintAngle_2")
SketchLine_26 = Sketch_3.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLine_8"))
SketchLine_26.setName("SketchLine_34")
SketchLine_26.result().setName("SketchLine_34")
SketchConstraintMirror_1_objects = [SketchLine_22.result(), SketchLine_25.result(), SketchLine_24.result()]
SketchConstraintMirror_1 = Sketch_3.addMirror(SketchLine_26.result(), SketchConstraintMirror_1_objects)
[SketchLine_27, SketchLine_28, SketchLine_29] = SketchConstraintMirror_1.mirrored()
SketchLine_29.setName("SketchLine_32")
SketchLine_29.result().setName("SketchLine_32")
model.do()
Sketch_3.setName("Sketch_4")
Sketch_3.result().setName("Sketch_4")
ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_1_1")])
ExtrusionCut_2.setName("Chamfrein_1")
Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_7"))
SketchLine_30 = Sketch_4.addLine(-149.5, 10.3, -149.5, 8.3)
SketchLine_30.setName("SketchLine_35")
SketchLine_30.result().setName("SketchLine_35")
SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_11&ExtrusionCut_1_1/Modfied_7&ExtrusionCut_1_1/Modfied_6"))
SketchPoint_4.setName("SketchPoint_6")
SketchPoint_4.result().setName("SketchPoint_6")
SketchConstraintCoincidence_42 = Sketch_4.setCoincident(SketchLine_30.startPoint(), SketchPoint_4.result())
SketchConstraintCoincidence_42.setName("SketchConstraintCoincidence_43")
SketchLine_31 = Sketch_4.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_11&ExtrusionCut_1_1/Modfied_7"))
SketchLine_31.setName("SketchLine_36")
SketchLine_31.result().setName("SketchLine_36")
SketchConstraintCoincidence_43 = Sketch_4.setCoincident(SketchLine_30.endPoint(), SketchLine_31.result())
SketchConstraintCoincidence_43.setName("SketchConstraintCoincidence_48")
SketchLine_32 = Sketch_4.addLine(-149.5, 8.3, -147.5, 10.3)
SketchLine_32.setName("SketchLine_37")
SketchLine_32.result().setName("SketchLine_37")
SketchConstraintCoincidence_44 = Sketch_4.setCoincident(SketchLine_30.endPoint(), SketchLine_32.startPoint())
SketchConstraintCoincidence_44.setName("SketchConstraintCoincidence_49")
SketchLine_33 = Sketch_4.addLine(-147.5, 10.3, -149.5, 10.3)
SketchLine_33.setName("SketchLine_38")
SketchLine_33.result().setName("SketchLine_38")
SketchConstraintCoincidence_45 = Sketch_4.setCoincident(SketchLine_32.endPoint(), SketchLine_33.startPoint())
SketchConstraintCoincidence_45.setName("SketchConstraintCoincidence_50")
SketchConstraintCoincidence_46 = Sketch_4.setCoincident(SketchLine_30.startPoint(), SketchLine_33.endPoint())
SketchConstraintCoincidence_46.setName("SketchConstraintCoincidence_51")
SketchConstraintCoincidence_47 = Sketch_4.setCoincident(SketchPoint_4.coordinates(), SketchLine_33.endPoint())
SketchConstraintCoincidence_47.setName("SketchConstraintCoincidence_52")
SketchConstraintCoincidence_48 = Sketch_4.setCoincident(SketchLine_31.startPoint(), SketchLine_33.endPoint())
SketchConstraintCoincidence_48.setName("SketchConstraintCoincidence_53")
SketchConstraintHorizontal_9 = Sketch_4.setHorizontal(SketchLine_33.result())
SketchConstraintAngle_2 = Sketch_4.setAngleBackward(SketchLine_30.result(), SketchLine_32.result(), 45)
SketchConstraintAngle_2.setName("SketchConstraintAngle_3")
SketchConstraintLength_7 = Sketch_4.setLength(SketchLine_33.result(), 2)
SketchLine_34 = Sketch_4.addLine(0, 0, 0, 100)
SketchLine_34.setName("SketchLine_39")
SketchLine_34.result().setName("SketchLine_39")
SketchConstraintMirror_2_objects = [SketchLine_32.result(), SketchLine_33.result(), SketchLine_30.result()]
SketchConstraintMirror_2 = Sketch_4.addMirror(SketchLine_34.result(), SketchConstraintMirror_2_objects)
[SketchLine_35, SketchLine_36, SketchLine_37] = SketchConstraintMirror_2.mirrored()
SketchLine_37.setName("SketchLine_42")
SketchLine_37.result().setName("SketchLine_42")
SketchLine_36.setName("SketchLine_41")
SketchLine_36.result().setName("SketchLine_41")
SketchLine_35.setName("SketchLine_40")
SketchLine_35.result().setName("SketchLine_40")
SketchConstraintRigid_1 = Sketch_4.setFixed(SketchLine_34.result())
SketchConstraintRigid_1.setName("SketchConstraintRigid_12")
SketchLine_38 = Sketch_4.addLine(153.5, 5.5, -100.5, 5.5)
SketchLine_38.setName("SketchLine_43")
SketchLine_38.result().setName("SketchLine_43")
SketchLine_38.setAuxiliary(True)
SketchConstraintHorizontal_10 = Sketch_4.setHorizontal(SketchLine_38.result())
SketchProjection_1 = Sketch_4.addProjection(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_5&ExtrusionCut_2_1/Modfied_2"))
SketchLine_39 = SketchProjection_1.createdFeature()
SketchLine_39.setName("SketchLine_44")
SketchLine_39.result().setName("SketchLine_44")
SketchConstraintDistance_3 = Sketch_4.setDistance(SketchLine_38.result(), SketchAPI_Line(SketchLine_39).endPoint(), 5.5)
SketchConstraintCoincidence_49 = Sketch_4.setCoincident(SketchLine_38.startPoint(), SketchLine_39.result())
SketchConstraintCoincidence_49.setName("SketchConstraintCoincidence_54")
SketchCircle_1 = Sketch_4.addCircle(100.5, 5.5, 1.5)
SketchConstraintRadius_3 = Sketch_4.setRadius(SketchCircle_1.results()[1], 1.5)
SketchCircle_2 = Sketch_4.addCircle(33.5, 5.5, 1.5)
SketchConstraintCoincidence_50 = Sketch_4.setCoincident(SketchCircle_2.center(), SketchLine_38.result())
SketchConstraintCoincidence_50.setName("SketchConstraintCoincidence_55")
SketchCircle_3 = Sketch_4.addCircle(-33.5, 5.5, 1.506545921898)
SketchConstraintCoincidence_51 = Sketch_4.setCoincident(SketchCircle_3.center(), SketchLine_38.result())
SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_56")
SketchCircle_4 = Sketch_4.addCircle(-100.5, 5.5, 1.506545921898)
SketchConstraintCoincidence_52 = Sketch_4.setCoincident(SketchCircle_4.center(), SketchLine_38.result())
SketchConstraintCoincidence_52.setName("SketchConstraintCoincidence_57")
SketchConstraintEqual_2 = Sketch_4.setEqual(SketchCircle_1.results()[1], SketchCircle_2.results()[1])
SketchConstraintEqual_3 = Sketch_4.setEqual(SketchCircle_3.results()[1], SketchCircle_4.results()[1])
SketchConstraintCoincidence_53 = Sketch_4.setCoincident(SketchCircle_1.center(), SketchLine_38.result())
SketchConstraintCoincidence_53.setName("SketchConstraintCoincidence_58")
SketchConstraintDistance_4 = Sketch_4.setDistance(SketchCircle_4.center(), SketchCircle_3.center(), 67)
SketchConstraintDistance_5 = Sketch_4.setDistance(SketchCircle_3.center(), SketchCircle_2.center(), 67)
SketchConstraintDistance_6 = Sketch_4.setDistance(SketchCircle_2.center(), SketchCircle_1.center(), 67)
SketchConstraintDistance_7 = Sketch_4.setDistance(SketchLine_39.result(), SketchCircle_1.center(), 53)
SketchConstraintCoincidence_54 = Sketch_4.setCoincident(SketchLine_38.endPoint(), SketchCircle_4.center())
SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_59")
model.do()
Sketch_4.setName("Sketch_5")
Sketch_4.result().setName("Sketch_5")
ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_5")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_5"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_9"))
SketchLine_40 = Sketch_5.addLine(152.2999838762584, -21.04999053274691, 153.5, -21.04999053274714)
SketchLine_40.setName("SketchLine_58")
SketchLine_40.result().setName("SketchLine_58")
SketchLine_41 = Sketch_5.addLine(152.2999838292651, -45.04999053274704, 153.5, -45.04999053274702)
SketchLine_41.setName("SketchLine_57")
SketchLine_41.result().setName("SketchLine_57")
SketchLine_42 = Sketch_5.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&ExtrusionCut_1_1/Modfied_9"))
SketchLine_42.setName("SketchLine_46")
SketchLine_42.result().setName("SketchLine_46")
SketchLine_43 = Sketch_5.addLine(150.8, -45.04999053274702, 153.5, -45.04999053274702)
SketchLine_43.setName("SketchLine_45")
SketchLine_43.result().setName("SketchLine_45")
SketchLine_43.setAuxiliary(True)
SketchConstraintCoincidence_55 = Sketch_5.setCoincident(SketchLine_43.endPoint(), SketchLine_42.result())
SketchConstraintCoincidence_55.setName("SketchConstraintCoincidence_60")
SketchLine_44 = Sketch_5.addLine(153.5, -45.04999053274702, 153.5, -37.04999053274702)
SketchLine_44.setName("SketchLine_47")
SketchLine_44.result().setName("SketchLine_47")
SketchLine_45 = Sketch_5.addLine(150.8, -14.54997391609652, 150.8, -19.54999029833178)
SketchLine_45.setName("SketchLine_61")
SketchLine_45.result().setName("SketchLine_61")
SketchLine_46 = Sketch_5.addLine(153.5, -13.04999053274714, 152.2999838654776, -13.04999053274697)
SketchLine_46.setName("SketchLine_60")
SketchLine_46.result().setName("SketchLine_60")
SketchLine_47 = Sketch_5.addLine(150.8, -37.04999053274702, 150.8, -45.04999053274702)
SketchLine_47.setName("SketchLine_49")
SketchLine_47.result().setName("SketchLine_49")
SketchLine_47.setAuxiliary(True)
SketchConstraintCoincidence_56 = Sketch_5.setCoincident(SketchLine_47.endPoint(), SketchLine_43.startPoint())
SketchConstraintCoincidence_56.setName("SketchConstraintCoincidence_61")
SketchConstraintCoincidence_57 = Sketch_5.setCoincident(SketchLine_43.endPoint(), SketchLine_44.startPoint())
SketchConstraintCoincidence_57.setName("SketchConstraintCoincidence_62")
SketchLine_48 = Sketch_5.addLine(153.5, -37.04999053274702, 150.8, -37.04999053274702)
SketchLine_48.setAuxiliary(True)
SketchConstraintCoincidence_58 = Sketch_5.setCoincident(SketchLine_44.endPoint(), SketchLine_48.startPoint())
SketchConstraintCoincidence_58.setName("SketchConstraintCoincidence_63")
SketchConstraintCoincidence_59 = Sketch_5.setCoincident(SketchLine_48.endPoint(), SketchLine_47.startPoint())
SketchConstraintCoincidence_59.setName("SketchConstraintCoincidence_64")
SketchConstraintHorizontal_11 = Sketch_5.setHorizontal(SketchLine_43.result())
SketchConstraintVertical_9 = Sketch_5.setVertical(SketchLine_44.result())
SketchConstraintHorizontal_12 = Sketch_5.setHorizontal(SketchLine_48.result())
SketchConstraintVertical_10 = Sketch_5.setVertical(SketchLine_47.result())
SketchLine_49 = Sketch_5.addLine(153.5, -37.04999053274702, 152.2999989299055, -37.04999053274738)
SketchLine_49.setName("SketchLine_62")
SketchLine_49.result().setName("SketchLine_62")
SketchLine_50 = Sketch_5.addLine(150.8, -38.54997391988981, 150.8, -43.54998998548124)
SketchLine_50.setName("SketchLine_63")
SketchLine_50.result().setName("SketchLine_63")
SketchLine_51 = Sketch_5.addLine(150.8, -21.04999053274714, 153.5, -21.04999053274714)
SketchLine_51.setName("SketchLine_50")
SketchLine_51.result().setName("SketchLine_50")
SketchLine_51.setAuxiliary(True)
SketchConstraintCoincidence_60 = Sketch_5.setCoincident(SketchLine_51.endPoint(), SketchLine_42.result())
SketchConstraintCoincidence_60.setName("SketchConstraintCoincidence_65")
SketchLine_52 = Sketch_5.addLine(153.5, -21.04999053274714, 153.5, -13.04999053274714)
SketchLine_52.setName("SketchLine_51")
SketchLine_52.result().setName("SketchLine_51")
SketchLine_53 = Sketch_5.addLine(150.8, -13.04999053274714, 150.8, -21.04999053274714)
SketchLine_53.setAuxiliary(True)
SketchConstraintCoincidence_61 = Sketch_5.setCoincident(SketchLine_53.endPoint(), SketchLine_51.startPoint())
SketchConstraintCoincidence_61.setName("SketchConstraintCoincidence_66")
SketchConstraintCoincidence_62 = Sketch_5.setCoincident(SketchLine_51.endPoint(), SketchLine_52.startPoint())
SketchConstraintCoincidence_62.setName("SketchConstraintCoincidence_67")
SketchLine_54 = Sketch_5.addLine(153.5, -13.04999053274714, 150.8, -13.04999053274714)
SketchLine_54.setName("SketchLine_52")
SketchLine_54.result().setName("SketchLine_52")
SketchLine_54.setAuxiliary(True)
SketchConstraintCoincidence_63 = Sketch_5.setCoincident(SketchLine_52.endPoint(), SketchLine_54.startPoint())
SketchConstraintCoincidence_63.setName("SketchConstraintCoincidence_68")
SketchConstraintCoincidence_64 = Sketch_5.setCoincident(SketchLine_54.endPoint(), SketchLine_53.startPoint())
SketchConstraintCoincidence_64.setName("SketchConstraintCoincidence_69")
SketchConstraintHorizontal_13 = Sketch_5.setHorizontal(SketchLine_51.result())
SketchConstraintVertical_11 = Sketch_5.setVertical(SketchLine_52.result())
SketchConstraintHorizontal_14 = Sketch_5.setHorizontal(SketchLine_54.result())
SketchConstraintVertical_12 = Sketch_5.setVertical(SketchLine_53.result())
SketchConstraintCoincidence_65 = Sketch_5.setCoincident(SketchLine_47.result(), SketchLine_53.endPoint())
SketchConstraintCoincidence_65.setName("SketchConstraintCoincidence_70")
SketchConstraintLength_8 = Sketch_5.setLength(SketchLine_43.result(), 2.7)
SketchConstraintLength_8.setName("SketchConstraintLength_9")
SketchConstraintLength_9 = Sketch_5.setLength(SketchLine_44.result(), 8)
SketchConstraintLength_9.setName("SketchConstraintLength_10")
SketchConstraintEqual_4 = Sketch_5.setEqual(SketchLine_47.result(), SketchLine_53.result())
SketchPoint_5 = Sketch_5.addPoint(153.5, -28.84999053274707)
SketchPoint_5.setName("SketchPoint_7")
SketchPoint_5.result().setName("SketchPoint_7")
SketchConstraintMiddle_1 = Sketch_5.setMiddlePoint(SketchPoint_5.coordinates(), SketchLine_42.result())
SketchLine_55 = Sketch_5.addLine(153.5, -28.84999053274707, -153.5, -28.84999053274707)
SketchLine_55.setName("SketchLine_54")
SketchLine_55.result().setName("SketchLine_54")
SketchLine_55.setAuxiliary(True)
SketchConstraintCoincidence_66 = Sketch_5.setCoincident(SketchPoint_5.coordinates(), SketchLine_55.startPoint())
SketchConstraintCoincidence_66.setName("SketchConstraintCoincidence_71")
SketchLine_56 = Sketch_5.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_3&ExtrusionCut_1_1/Modfied_9"))
SketchLine_56.setName("SketchLine_55")
SketchLine_56.result().setName("SketchLine_55")
SketchConstraintCoincidence_67 = Sketch_5.setCoincident(SketchLine_55.endPoint(), SketchLine_56.result())
SketchConstraintCoincidence_67.setName("SketchConstraintCoincidence_72")
SketchConstraintHorizontal_15 = Sketch_5.setHorizontal(SketchLine_55.result())
SketchConstraintDistance_8 = Sketch_5.setDistance(SketchLine_48.result(), SketchPoint_5.coordinates(), 8.2)
SketchConstraintDistance_9 = Sketch_5.setDistance(SketchLine_51.result(), SketchPoint_5.coordinates(), 7.8)
SketchArc_3 = Sketch_5.addArc(152.3, -43.54999053274682, 150.8, -43.54998998548124, 152.2999838292651, -45.04999053274704, False)
SketchLine_57 = Sketch_5.addLine(150.8, -37.04999053274702, 150.8, -43.54998998548124)
SketchLine_57.setName("SketchLine_56")
SketchLine_57.result().setName("SketchLine_56")
SketchLine_57.setAuxiliary(True)
SketchConstraintCoincidence_68 = Sketch_5.setCoincident(SketchArc_3.startPoint(), SketchLine_57.endPoint())
SketchConstraintCoincidence_68.setName("SketchConstraintCoincidence_73")
SketchConstraintCoincidence_69 = Sketch_5.setCoincident(SketchArc_3.endPoint(), SketchLine_41.startPoint())
SketchConstraintCoincidence_69.setName("SketchConstraintCoincidence_74")
SketchConstraintTangent_5 = Sketch_5.setTangent(SketchArc_3.results()[1], SketchLine_57.result())
SketchConstraintTangent_6 = Sketch_5.setTangent(SketchArc_3.results()[1], SketchLine_41.result())
SketchConstraintCoincidence_70 = Sketch_5.setCoincident(SketchLine_47.startPoint(), SketchLine_57.startPoint())
SketchConstraintCoincidence_70.setName("SketchConstraintCoincidence_75")
SketchConstraintCoincidence_71 = Sketch_5.setCoincident(SketchLine_43.endPoint(), SketchLine_41.endPoint())
SketchConstraintCoincidence_71.setName("SketchConstraintCoincidence_76")
SketchConstraintCoincidence_72 = Sketch_5.setCoincident(SketchLine_57.endPoint(), SketchLine_47.result())
SketchConstraintCoincidence_72.setName("SketchConstraintCoincidence_77")
SketchConstraintCoincidence_73 = Sketch_5.setCoincident(SketchLine_41.startPoint(), SketchLine_43.result())
SketchConstraintCoincidence_73.setName("SketchConstraintCoincidence_78")
SketchArc_4 = Sketch_5.addArc(152.3, -19.54999053274696, 150.8, -19.54999029833178, 152.2999838762584, -21.04999053274691, False)
SketchLine_58 = Sketch_5.addLine(150.8, -13.04999053274714, 150.8, -19.54999029833178)
SketchLine_58.setName("SketchLine_59")
SketchLine_58.result().setName("SketchLine_59")
SketchLine_58.setAuxiliary(True)
SketchConstraintCoincidence_74 = Sketch_5.setCoincident(SketchArc_4.startPoint(), SketchLine_58.endPoint())
SketchConstraintCoincidence_74.setName("SketchConstraintCoincidence_79")
SketchConstraintCoincidence_75 = Sketch_5.setCoincident(SketchArc_4.endPoint(), SketchLine_40.startPoint())
SketchConstraintCoincidence_75.setName("SketchConstraintCoincidence_80")
SketchConstraintTangent_7 = Sketch_5.setTangent(SketchArc_4.results()[1], SketchLine_40.result())
SketchConstraintTangent_8 = Sketch_5.setTangent(SketchArc_4.results()[1], SketchLine_58.result())
SketchConstraintCoincidence_76 = Sketch_5.setCoincident(SketchLine_51.endPoint(), SketchLine_40.endPoint())
SketchConstraintCoincidence_76.setName("SketchConstraintCoincidence_81")
SketchConstraintCoincidence_77 = Sketch_5.setCoincident(SketchLine_53.startPoint(), SketchLine_58.startPoint())
SketchConstraintCoincidence_77.setName("SketchConstraintCoincidence_82")
SketchConstraintCoincidence_78 = Sketch_5.setCoincident(SketchLine_40.startPoint(), SketchLine_51.result())
SketchConstraintCoincidence_78.setName("SketchConstraintCoincidence_83")
SketchConstraintCoincidence_79 = Sketch_5.setCoincident(SketchLine_58.endPoint(), SketchLine_53.result())
SketchConstraintCoincidence_79.setName("SketchConstraintCoincidence_84")
SketchArc_5 = Sketch_5.addArc(152.3, -14.54999053274707, 152.2999838654776, -13.04999053274697, 150.8, -14.54997391609652, False)
SketchConstraintCoincidence_80 = Sketch_5.setCoincident(SketchArc_5.startPoint(), SketchLine_46.endPoint())
SketchConstraintCoincidence_80.setName("SketchConstraintCoincidence_85")
SketchConstraintCoincidence_81 = Sketch_5.setCoincident(SketchArc_5.endPoint(), SketchLine_45.startPoint())
SketchConstraintCoincidence_81.setName("SketchConstraintCoincidence_86")
SketchConstraintTangent_9 = Sketch_5.setTangent(SketchArc_5.results()[1], SketchLine_46.result())
SketchConstraintTangent_10 = Sketch_5.setTangent(SketchArc_5.results()[1], SketchLine_45.result())
SketchConstraintCoincidence_82 = Sketch_5.setCoincident(SketchLine_54.startPoint(), SketchLine_46.startPoint())
SketchConstraintCoincidence_82.setName("SketchConstraintCoincidence_87")
SketchConstraintCoincidence_83 = Sketch_5.setCoincident(SketchLine_58.endPoint(), SketchLine_45.endPoint())
SketchConstraintCoincidence_83.setName("SketchConstraintCoincidence_88")
SketchConstraintCoincidence_84 = Sketch_5.setCoincident(SketchLine_46.endPoint(), SketchLine_54.result())
SketchConstraintCoincidence_84.setName("SketchConstraintCoincidence_89")
SketchConstraintCoincidence_85 = Sketch_5.setCoincident(SketchLine_45.startPoint(), SketchLine_58.result())
SketchConstraintCoincidence_85.setName("SketchConstraintCoincidence_90")
SketchArc_6 = Sketch_5.addArc(152.3, -38.54999053274739, 152.2999989299055, -37.04999053274738, 150.8, -38.54997391988981, False)
SketchConstraintCoincidence_86 = Sketch_5.setCoincident(SketchArc_6.startPoint(), SketchLine_49.endPoint())
SketchConstraintCoincidence_86.setName("SketchConstraintCoincidence_91")
SketchConstraintCoincidence_87 = Sketch_5.setCoincident(SketchArc_6.endPoint(), SketchLine_50.startPoint())
SketchConstraintCoincidence_87.setName("SketchConstraintCoincidence_92")
SketchConstraintTangent_11 = Sketch_5.setTangent(SketchArc_6.results()[1], SketchLine_49.result())
SketchConstraintTangent_12 = Sketch_5.setTangent(SketchArc_6.results()[1], SketchLine_50.result())
SketchConstraintCoincidence_88 = Sketch_5.setCoincident(SketchLine_48.startPoint(), SketchLine_49.startPoint())
SketchConstraintCoincidence_88.setName("SketchConstraintCoincidence_93")
SketchConstraintCoincidence_89 = Sketch_5.setCoincident(SketchLine_57.endPoint(), SketchLine_50.endPoint())
SketchConstraintCoincidence_89.setName("SketchConstraintCoincidence_94")
SketchConstraintCoincidence_90 = Sketch_5.setCoincident(SketchLine_49.endPoint(), SketchLine_48.result())
SketchConstraintCoincidence_90.setName("SketchConstraintCoincidence_95")
SketchConstraintCoincidence_91 = Sketch_5.setCoincident(SketchLine_50.startPoint(), SketchLine_57.result())
SketchConstraintCoincidence_91.setName("SketchConstraintCoincidence_96")
SketchConstraintRadius_4 = Sketch_5.setRadius(SketchArc_3.results()[1], 1.5)
SketchConstraintEqual_5 = Sketch_5.setEqual(SketchArc_6.results()[1], SketchArc_3.results()[1])
SketchConstraintEqual_6 = Sketch_5.setEqual(SketchArc_3.results()[1], SketchArc_4.results()[1])
SketchConstraintEqual_7 = Sketch_5.setEqual(SketchArc_4.results()[1], SketchArc_5.results()[1])
SketchLine_59 = Sketch_5.addLine(model.selection("EDGE", "PartSet/OY"))
SketchLine_59.setName("SketchLine_64")
SketchLine_59.result().setName("SketchLine_64")
SketchConstraintMirror_3_objects = [SketchArc_3.results()[1], SketchArc_6.results()[1], SketchLine_49.result(), SketchLine_50.result(), SketchLine_44.result(), SketchLine_41.result(), SketchLine_43.result(), SketchLine_57.result(), SketchLine_48.result(), SketchLine_47.result()]
SketchConstraintMirror_3 = Sketch_5.addMirror(SketchLine_59.result(), SketchConstraintMirror_3_objects)
[SketchArc_7, SketchArc_8, SketchLine_60, SketchLine_61, SketchLine_62, SketchLine_63, SketchLine_64, SketchLine_65, SketchLine_66, SketchLine_67] = SketchConstraintMirror_3.mirrored()
SketchLine_67.setName("SketchLine_72")
SketchLine_67.result().setName("SketchLine_72")
SketchLine_66.setName("SketchLine_71")
SketchLine_66.result().setName("SketchLine_71")
SketchLine_65.setName("SketchLine_70")
SketchLine_65.result().setName("SketchLine_70")
SketchLine_64.setName("SketchLine_69")
SketchLine_64.result().setName("SketchLine_69")
SketchLine_63.setName("SketchLine_68")
SketchLine_63.result().setName("SketchLine_68")
SketchLine_62.setName("SketchLine_67")
SketchLine_62.result().setName("SketchLine_67")
SketchLine_61.setName("SketchLine_66")
SketchLine_61.result().setName("SketchLine_66")
SketchLine_60.setName("SketchLine_65")
SketchLine_60.result().setName("SketchLine_65")
SketchConstraintMirror_4_objects = [SketchArc_4.results()[1], SketchArc_5.results()[1], SketchLine_52.result(), SketchLine_45.result(), SketchLine_46.result(), SketchLine_40.result(), SketchLine_54.result(), SketchLine_58.result(), SketchLine_51.result(), SketchLine_53.result()]
SketchConstraintMirror_4 = Sketch_5.addMirror(SketchLine_59.result(), SketchConstraintMirror_4_objects)
[SketchArc_9, SketchArc_10, SketchLine_68, SketchLine_69, SketchLine_70, SketchLine_71, SketchLine_72, SketchLine_73, SketchLine_74, SketchLine_75] = SketchConstraintMirror_4.mirrored()
SketchLine_75.setName("SketchLine_80")
SketchLine_75.result().setName("SketchLine_80")
SketchLine_74.setName("SketchLine_79")
SketchLine_74.result().setName("SketchLine_79")
SketchLine_73.setName("SketchLine_78")
SketchLine_73.result().setName("SketchLine_78")
SketchLine_72.setName("SketchLine_77")
SketchLine_72.result().setName("SketchLine_77")
SketchLine_71.setName("SketchLine_76")
SketchLine_71.result().setName("SketchLine_76")
SketchLine_70.setName("SketchLine_75")
SketchLine_70.result().setName("SketchLine_75")
SketchLine_69.setName("SketchLine_74")
SketchLine_69.result().setName("SketchLine_74")
SketchLine_68.setName("SketchLine_73")
SketchLine_68.result().setName("SketchLine_73")
model.do()
Sketch_5.setName("Sketch_6")
Sketch_5.result().setName("Sketch_6")
ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_6/Wire-SketchArc_9_2f-SketchArc_10_2f-SketchLine_73r-SketchLine_74r-SketchLine_75r-SketchLine_76r"), model.selection("WIRE", "Sketch_6/Wire-SketchLine_58f-SketchLine_61f-SketchLine_60f-SketchLine_51f-SketchArc_4_2f-SketchArc_5_2f"), model.selection("WIRE", "Sketch_6/Wire-SketchLine_57f-SketchLine_47f-SketchLine_62f-SketchLine_63f-SketchArc_3_2f-SketchArc_6_2f")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_3_1")])
Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_4_1/Modfied_1"))
SketchArc_11 = Sketch_6.addArc(44.89, -23.54999053274703, 43.89, -23.54999053274703, 44.89, -22.54999053274703, False)
SketchArc_12 = Sketch_6.addArc(44.89, -13.54999053274703, 44.89, -14.54999053274703, 43.89, -13.54999053274703, False)
SketchArc_13 = Sketch_6.addArc(5.89, -13.54999053274703, 6.89, -13.54999053274703, 5.89, -14.54999053274703, False)
SketchArc_13.setName("SketchArc_14")
SketchArc_13.result().setName("SketchArc_14")
SketchArc_13.results()[1].setName("SketchArc_14_2")
SketchLine_76 = Sketch_6.addLine(6.89, -23.54999053274703, 43.89, -23.54999053274703)
SketchLine_76.setName("SketchLine_81")
SketchLine_76.result().setName("SketchLine_81")
SketchConstraintCoincidence_92 = Sketch_6.setCoincident(SketchArc_11.startPoint(), SketchLine_76.endPoint())
SketchConstraintCoincidence_92.setName("SketchConstraintCoincidence_98")
SketchLine_77 = Sketch_6.addLine(6.89, -13.54999053274703, 43.89, -13.54999053274703)
SketchLine_77.setName("SketchLine_82")
SketchLine_77.result().setName("SketchLine_82")
SketchConstraintCoincidence_93 = Sketch_6.setCoincident(SketchArc_13.startPoint(), SketchLine_77.startPoint())
SketchConstraintCoincidence_93.setName("SketchConstraintCoincidence_99")
SketchLine_78 = Sketch_6.addLine(44.89, -22.54999053274703, 44.89, -14.54999053274703)
SketchLine_78.setName("SketchLine_83")
SketchLine_78.result().setName("SketchLine_83")
SketchConstraintCoincidence_94 = Sketch_6.setCoincident(SketchArc_12.startPoint(), SketchLine_78.endPoint())
SketchConstraintCoincidence_94.setName("SketchConstraintCoincidence_100")
SketchLine_79 = Sketch_6.addLine(5.89, -22.54999053274703, 5.89, -14.54999053274703)
SketchLine_79.setName("SketchLine_84")
SketchLine_79.result().setName("SketchLine_84")
SketchConstraintCoincidence_95 = Sketch_6.setCoincident(SketchArc_13.endPoint(), SketchLine_79.endPoint())
SketchConstraintCoincidence_95.setName("SketchConstraintCoincidence_101")
SketchConstraintHorizontal_16 = Sketch_6.setHorizontal(SketchLine_76.result())
SketchConstraintHorizontal_17 = Sketch_6.setHorizontal(SketchLine_77.result())
SketchConstraintVertical_13 = Sketch_6.setVertical(SketchLine_79.result())
SketchConstraintVertical_14 = Sketch_6.setVertical(SketchLine_78.result())
SketchConstraintCoincidence_96 = Sketch_6.setCoincident(SketchArc_11.endPoint(), SketchLine_78.startPoint())
SketchConstraintCoincidence_96.setName("SketchConstraintCoincidence_102")
SketchConstraintCoincidence_97 = Sketch_6.setCoincident(SketchArc_12.endPoint(), SketchLine_77.endPoint())
SketchConstraintCoincidence_97.setName("SketchConstraintCoincidence_104")
SketchConstraintCoincidence_98 = Sketch_6.setCoincident(SketchArc_11.center(), SketchLine_78.result())
SketchConstraintCoincidence_98.setName("SketchConstraintCoincidence_105")
SketchConstraintCoincidence_99 = Sketch_6.setCoincident(SketchArc_11.center(), SketchLine_76.result())
SketchConstraintCoincidence_99.setName("SketchConstraintCoincidence_106")
SketchConstraintRadius_5 = Sketch_6.setRadius(SketchArc_11.results()[1], 1)
SketchConstraintCoincidence_100 = Sketch_6.setCoincident(SketchArc_12.center(), SketchLine_78.result())
SketchConstraintCoincidence_100.setName("SketchConstraintCoincidence_107")
SketchConstraintCoincidence_101 = Sketch_6.setCoincident(SketchArc_12.center(), SketchLine_77.result())
SketchConstraintCoincidence_101.setName("SketchConstraintCoincidence_108")
SketchConstraintCoincidence_102 = Sketch_6.setCoincident(SketchArc_13.center(), SketchLine_77.result())
SketchConstraintCoincidence_102.setName("SketchConstraintCoincidence_109")
SketchConstraintEqual_8 = Sketch_6.setEqual(SketchArc_11.results()[1], SketchArc_12.results()[1])
SketchConstraintEqual_9 = Sketch_6.setEqual(SketchArc_13.results()[1], SketchArc_11.results()[1])
SketchConstraintEqual_9.setName("SketchConstraintEqual_10")
SketchConstraintCoincidence_103 = Sketch_6.setCoincident(SketchArc_13.center(), SketchLine_79.result())
SketchConstraintCoincidence_103.setName("SketchConstraintCoincidence_112")
SketchConstraintDistance_10 = Sketch_6.setDistance(SketchLine_76.result(), SketchArc_13.startPoint(), 10)
SketchConstraintDistance_11 = Sketch_6.setDistance(SketchLine_79.startPoint(), SketchLine_78.result(), 39)
SketchLine_80 = Sketch_6.addLine(model.selection("EDGE", "PartSet/OY"))
SketchLine_80.setName("SketchLine_85")
SketchLine_80.result().setName("SketchLine_85")
SketchConstraintDistance_12 = Sketch_6.setDistance(SketchLine_79.startPoint(), SketchLine_80.result(), 5.89)
SketchLine_81 = Sketch_6.addLine(model.selection("EDGE", "Sketch_6/Edge-SketchLine_54"))
SketchLine_81.setName("SketchLine_86")
SketchLine_81.result().setName("SketchLine_86")
SketchConstraintDistance_13 = Sketch_6.setDistance(SketchLine_76.endPoint(), SketchLine_81.result(), 5.3)
SketchArc_14 = Sketch_6.addArc(5.89, -23.54999053274703, 5.89, -22.54999053274703, 6.89, -23.54999053274703, False)
SketchArc_14.setName("SketchArc_15")
SketchArc_14.result().setName("SketchArc_15")
SketchArc_14.results()[1].setName("SketchArc_15_2")
SketchConstraintCoincidence_104 = Sketch_6.setCoincident(SketchLine_79.startPoint(), SketchArc_14.startPoint())
SketchConstraintCoincidence_104.setName("SketchConstraintCoincidence_110")
SketchConstraintCoincidence_105 = Sketch_6.setCoincident(SketchArc_14.endPoint(), SketchLine_76.startPoint())
SketchConstraintCoincidence_105.setName("SketchConstraintCoincidence_111")
SketchConstraintCoincidence_106 = Sketch_6.setCoincident(SketchArc_14.center(), SketchLine_76.result())
SketchConstraintCoincidence_106.setName("SketchConstraintCoincidence_113")
SketchConstraintCoincidence_107 = Sketch_6.setCoincident(SketchArc_14.center(), SketchLine_79.result())
SketchConstraintCoincidence_107.setName("SketchConstraintCoincidence_114")
SketchConstraintEqual_10 = Sketch_6.setEqual(SketchArc_11.results()[1], SketchArc_14.results()[1])
SketchConstraintEqual_10.setName("SketchConstraintEqual_11")
SketchPoint_6 = Sketch_6.addPoint(0, -28.84999053274704)
SketchPoint_6.setName("SketchPoint_8")
SketchPoint_6.result().setName("SketchPoint_8")
SketchPoint_7 = Sketch_6.addPoint(50.77, -28.84999053274703)
SketchPoint_7.setName("SketchPoint_9")
SketchPoint_7.result().setName("SketchPoint_9")
SketchPoint_8 = Sketch_6.addPoint(101.54, -28.84999053274702)
SketchPoint_8.setName("SketchPoint_10")
SketchPoint_8.result().setName("SketchPoint_10")
SketchConstraintCoincidence_108 = Sketch_6.setCoincident(SketchLine_80.result(), SketchPoint_6.coordinates())
SketchConstraintCoincidence_108.setName("SketchConstraintCoincidence_115")
SketchConstraintCoincidence_109 = Sketch_6.setCoincident(SketchLine_81.result(), SketchPoint_6.coordinates())
SketchConstraintCoincidence_109.setName("SketchConstraintCoincidence_116")
SketchConstraintCoincidence_110 = Sketch_6.setCoincident(SketchPoint_7.coordinates(), SketchLine_81.result())
SketchConstraintCoincidence_110.setName("SketchConstraintCoincidence_117")
SketchConstraintCoincidence_111 = Sketch_6.setCoincident(SketchPoint_8.coordinates(), SketchLine_81.result())
SketchConstraintCoincidence_111.setName("SketchConstraintCoincidence_118")
SketchConstraintDistance_14 = Sketch_6.setDistance(SketchPoint_7.coordinates(), SketchLine_80.result(), "56.66-5.89")
SketchConstraintDistance_15 = Sketch_6.setDistance(SketchLine_80.result(), SketchPoint_8.coordinates(), "107.43-5.89")
SketchMultiTranslation_1_objects = [SketchArc_13.results()[1], SketchArc_14.results()[1], SketchArc_12.results()[1], SketchArc_11.results()[1], SketchLine_78.result(), SketchLine_76.result(), SketchLine_77.result(), SketchLine_79.result()]
SketchMultiTranslation_1 = Sketch_6.addTranslation(SketchMultiTranslation_1_objects, SketchPoint_6.coordinates(), SketchPoint_7.coordinates(), 2)
[SketchArc_15, SketchArc_16, SketchArc_17, SketchArc_18, SketchLine_82, SketchLine_83, SketchLine_84, SketchLine_85] = SketchMultiTranslation_1.translated()
SketchLine_85.setName("SketchLine_90")
SketchLine_85.result().setName("SketchLine_90")
SketchLine_84.setName("SketchLine_89")
SketchLine_84.result().setName("SketchLine_89")
SketchLine_83.setName("SketchLine_88")
SketchLine_83.result().setName("SketchLine_88")
SketchLine_82.setName("SketchLine_87")
SketchLine_82.result().setName("SketchLine_87")
SketchArc_18.setName("SketchArc_19")
SketchArc_18.result().setName("SketchArc_19")
SketchArc_18.results()[1].setName("SketchArc_19_2")
SketchArc_17.setName("SketchArc_18")
SketchArc_17.result().setName("SketchArc_18")
SketchArc_17.results()[1].setName("SketchArc_18_2")
SketchArc_16.setName("SketchArc_17")
SketchArc_16.result().setName("SketchArc_17")
SketchArc_16.results()[1].setName("SketchArc_17_2")
SketchArc_15.setName("SketchArc_16")
SketchArc_15.result().setName("SketchArc_16")
SketchArc_15.results()[1].setName("SketchArc_16_2")
SketchMultiTranslation_2_objects = [SketchArc_12.results()[1], SketchArc_13.results()[1], SketchArc_11.results()[1], SketchArc_14.results()[1], SketchLine_79.result(), SketchLine_78.result(), SketchLine_77.result(), SketchLine_76.result()]
SketchMultiTranslation_2 = Sketch_6.addTranslation(SketchMultiTranslation_2_objects, SketchPoint_6.coordinates(), SketchPoint_8.coordinates(), 2)
[SketchArc_19, SketchArc_20, SketchArc_21, SketchArc_22, SketchLine_86, SketchLine_87, SketchLine_88, SketchLine_89] = SketchMultiTranslation_2.translated()
SketchLine_89.setName("SketchLine_94")
SketchLine_89.result().setName("SketchLine_94")
SketchLine_88.setName("SketchLine_93")
SketchLine_88.result().setName("SketchLine_93")
SketchLine_87.setName("SketchLine_92")
SketchLine_87.result().setName("SketchLine_92")
SketchLine_86.setName("SketchLine_91")
SketchLine_86.result().setName("SketchLine_91")
SketchArc_22.setName("SketchArc_23")
SketchArc_22.result().setName("SketchArc_23")
SketchArc_22.results()[1].setName("SketchArc_23_2")
SketchArc_21.setName("SketchArc_22")
SketchArc_21.result().setName("SketchArc_22")
SketchArc_21.results()[1].setName("SketchArc_22_2")
SketchArc_20.setName("SketchArc_21")
SketchArc_20.result().setName("SketchArc_21")
SketchArc_20.results()[1].setName("SketchArc_21_2")
SketchArc_19.setName("SketchArc_20")
SketchArc_19.result().setName("SketchArc_20")
SketchArc_19.results()[1].setName("SketchArc_20_2")
SketchConstraintMirror_5_objects = [SketchArc_18.results()[1], SketchArc_17.results()[1], SketchArc_16.results()[1], SketchArc_15.results()[1], SketchArc_22.results()[1], SketchArc_20.results()[1], SketchArc_11.results()[1], SketchArc_12.results()[1], SketchArc_21.results()[1], SketchArc_19.results()[1], SketchArc_14.results()[1], SketchArc_13.results()[1], SketchLine_77.result(), SketchLine_78.result(), SketchLine_79.result(), SketchLine_85.result(), SketchLine_87.result(), SketchLine_82.result(), SketchLine_84.result(), SketchLine_86.result(), SketchLine_83.result(), SketchLine_88.result(), SketchLine_76.result(), SketchLine_89.result()]
SketchConstraintMirror_5 = Sketch_6.addMirror(SketchLine_80.result(), SketchConstraintMirror_5_objects)
[SketchArc_23, SketchArc_24, SketchArc_25, SketchArc_26, SketchArc_27, SketchArc_28, SketchArc_29, SketchArc_30, SketchArc_31, SketchArc_32, SketchArc_33, SketchArc_34, SketchLine_90, SketchLine_91, SketchLine_92, SketchLine_93, SketchLine_94, SketchLine_95, SketchLine_96, SketchLine_97, SketchLine_98, SketchLine_99, SketchLine_100, SketchLine_101] = SketchConstraintMirror_5.mirrored()
SketchLine_101.setName("SketchLine_106")
SketchLine_101.result().setName("SketchLine_106")
SketchLine_100.setName("SketchLine_105")
SketchLine_100.result().setName("SketchLine_105")
SketchLine_99.setName("SketchLine_104")
SketchLine_99.result().setName("SketchLine_104")
SketchLine_98.setName("SketchLine_103")
SketchLine_98.result().setName("SketchLine_103")
SketchLine_97.setName("SketchLine_102")
SketchLine_97.result().setName("SketchLine_102")
SketchLine_96.setName("SketchLine_101")
SketchLine_96.result().setName("SketchLine_101")
SketchLine_95.setName("SketchLine_100")
SketchLine_95.result().setName("SketchLine_100")
SketchLine_94.setName("SketchLine_99")
SketchLine_94.result().setName("SketchLine_99")
SketchLine_93.setName("SketchLine_98")
SketchLine_93.result().setName("SketchLine_98")
SketchLine_92.setName("SketchLine_97")
SketchLine_92.result().setName("SketchLine_97")
SketchLine_91.setName("SketchLine_96")
SketchLine_91.result().setName("SketchLine_96")
SketchLine_90.setName("SketchLine_95")
SketchLine_90.result().setName("SketchLine_95")
SketchArc_34.setName("SketchArc_35")
SketchArc_34.result().setName("SketchArc_35")
SketchArc_34.results()[1].setName("SketchArc_35_2")
SketchArc_33.setName("SketchArc_34")
SketchArc_33.result().setName("SketchArc_34")
SketchArc_33.results()[1].setName("SketchArc_34_2")
SketchArc_32.setName("SketchArc_33")
SketchArc_32.result().setName("SketchArc_33")
SketchArc_32.results()[1].setName("SketchArc_33_2")
SketchArc_31.setName("SketchArc_32")
SketchArc_31.result().setName("SketchArc_32")
SketchArc_31.results()[1].setName("SketchArc_32_2")
SketchArc_30.setName("SketchArc_31")
SketchArc_30.result().setName("SketchArc_31")
SketchArc_30.results()[1].setName("SketchArc_31_2")
SketchArc_29.setName("SketchArc_30")
SketchArc_29.result().setName("SketchArc_30")
SketchArc_29.results()[1].setName("SketchArc_30_2")
SketchArc_28.setName("SketchArc_29")
SketchArc_28.result().setName("SketchArc_29")
SketchArc_28.results()[1].setName("SketchArc_29_2")
SketchArc_27.setName("SketchArc_28")
SketchArc_27.result().setName("SketchArc_28")
SketchArc_27.results()[1].setName("SketchArc_28_2")
SketchArc_26.setName("SketchArc_27")
SketchArc_26.result().setName("SketchArc_27")
SketchArc_26.results()[1].setName("SketchArc_27_2")
SketchArc_25.setName("SketchArc_26")
SketchArc_25.result().setName("SketchArc_26")
SketchArc_25.results()[1].setName("SketchArc_26_2")
SketchArc_24.setName("SketchArc_25")
SketchArc_24.result().setName("SketchArc_25")
SketchArc_24.results()[1].setName("SketchArc_25_2")
SketchArc_23.setName("SketchArc_24")
SketchArc_23.result().setName("SketchArc_24")
SketchArc_23.results()[1].setName("SketchArc_24_2")
SketchPoint_9 = Sketch_6.addPoint(0, -49.84999053274704)
SketchPoint_9.setName("SketchPoint_11")
SketchPoint_9.result().setName("SketchPoint_11")
SketchConstraintCoincidence_112 = Sketch_6.setCoincident(SketchPoint_9.coordinates(), SketchLine_80.result())
SketchConstraintCoincidence_112.setName("SketchConstraintCoincidence_119")
SketchConstraintDistance_16 = Sketch_6.setDistance(SketchPoint_9.coordinates(), SketchLine_81.result(), "10+5.3+5.7")
SketchMultiTranslation_3_objects = [SketchArc_13.results()[1], SketchArc_34.results()[1], SketchArc_14.results()[1], SketchArc_33.results()[1], SketchArc_12.results()[1], SketchArc_11.results()[1], SketchArc_30.results()[1], SketchArc_29.results()[1], SketchArc_15.results()[1], SketchArc_16.results()[1], SketchArc_26.results()[1], SketchArc_25.results()[1], SketchArc_17.results()[1], SketchArc_18.results()[1], SketchArc_24.results()[1], SketchArc_23.results()[1], SketchArc_20.results()[1], SketchArc_22.results()[1], SketchArc_28.results()[1], SketchArc_27.results()[1], SketchArc_19.results()[1], SketchArc_21.results()[1], SketchArc_32.results()[1], SketchArc_31.results()[1], SketchLine_82.result(), SketchLine_77.result(), SketchLine_97.result(), SketchLine_94.result(), SketchLine_101.result(), SketchLine_99.result(), SketchLine_83.result(), SketchLine_88.result(), SketchLine_89.result(), SketchLine_86.result(), SketchLine_85.result(), SketchLine_100.result(), SketchLine_79.result(), SketchLine_92.result(), SketchLine_87.result(), SketchLine_91.result(), SketchLine_84.result(), SketchLine_96.result(), SketchLine_95.result(), SketchLine_93.result(), SketchLine_78.result(), SketchLine_98.result(), SketchLine_76.result(), SketchLine_90.result()]
SketchMultiTranslation_3 = Sketch_6.addTranslation(SketchMultiTranslation_3_objects, SketchPoint_6.coordinates(), SketchPoint_9.coordinates(), 2)
[SketchArc_35, SketchArc_34, SketchArc_36, SketchArc_37, SketchArc_33, SketchArc_38, SketchArc_39, SketchArc_40, SketchArc_30, SketchArc_41, SketchArc_29, SketchArc_42, SketchArc_15, SketchArc_43, SketchArc_16, SketchArc_44, SketchArc_26, SketchArc_45, SketchArc_25, SketchArc_46, SketchArc_17, SketchArc_47, SketchArc_18, SketchArc_48, SketchArc_24, SketchArc_49, SketchArc_23, SketchArc_50, SketchArc_20, SketchArc_51, SketchArc_22, SketchArc_52, SketchArc_28, SketchArc_53, SketchArc_27, SketchArc_54, SketchArc_19, SketchArc_55, SketchArc_21, SketchArc_56, SketchArc_32, SketchArc_57, SketchArc_31, SketchArc_58, SketchLine_82, SketchLine_102, SketchLine_103, SketchLine_97, SketchLine_104, SketchLine_94, SketchLine_105, SketchLine_101, SketchLine_106, SketchLine_99, SketchLine_107, SketchLine_83, SketchLine_108, SketchLine_88, SketchLine_109, SketchLine_89, SketchLine_110, SketchLine_86, SketchLine_111, SketchLine_85, SketchLine_112, SketchLine_100, SketchLine_113, SketchLine_114, SketchLine_92, SketchLine_115, SketchLine_87, SketchLine_116, SketchLine_91, SketchLine_117, SketchLine_84, SketchLine_118, SketchLine_96, SketchLine_119, SketchLine_95, SketchLine_120, SketchLine_93, SketchLine_121, SketchLine_122, SketchLine_98, SketchLine_123, SketchLine_124, SketchLine_90, SketchLine_125] = SketchMultiTranslation_3.translated()
SketchLine_125.setName("SketchLine_130")
SketchLine_125.result().setName("SketchLine_130")
SketchLine_124.setName("SketchLine_129")
SketchLine_124.result().setName("SketchLine_129")
SketchLine_123.setName("SketchLine_128")
SketchLine_123.result().setName("SketchLine_128")
SketchLine_122.setName("SketchLine_127")
SketchLine_122.result().setName("SketchLine_127")
SketchLine_121.setName("SketchLine_126")
SketchLine_121.result().setName("SketchLine_126")
SketchLine_120.setName("SketchLine_125")
SketchLine_120.result().setName("SketchLine_125")
SketchLine_119.setName("SketchLine_124")
SketchLine_119.result().setName("SketchLine_124")
SketchLine_118.setName("SketchLine_123")
SketchLine_118.result().setName("SketchLine_123")
SketchLine_117.setName("SketchLine_122")
SketchLine_117.result().setName("SketchLine_122")
SketchLine_116.setName("SketchLine_121")
SketchLine_116.result().setName("SketchLine_121")
SketchLine_115.setName("SketchLine_120")
SketchLine_115.result().setName("SketchLine_120")
SketchLine_114.setName("SketchLine_119")
SketchLine_114.result().setName("SketchLine_119")
SketchLine_113.setName("SketchLine_118")
SketchLine_113.result().setName("SketchLine_118")
SketchLine_112.setName("SketchLine_117")
SketchLine_112.result().setName("SketchLine_117")
SketchLine_111.setName("SketchLine_116")
SketchLine_111.result().setName("SketchLine_116")
SketchLine_110.setName("SketchLine_115")
SketchLine_110.result().setName("SketchLine_115")
SketchLine_109.setName("SketchLine_114")
SketchLine_109.result().setName("SketchLine_114")
SketchLine_108.setName("SketchLine_113")
SketchLine_108.result().setName("SketchLine_113")
SketchLine_107.setName("SketchLine_112")
SketchLine_107.result().setName("SketchLine_112")
SketchLine_106.setName("SketchLine_111")
SketchLine_106.result().setName("SketchLine_111")
SketchLine_105.setName("SketchLine_110")
SketchLine_105.result().setName("SketchLine_110")
SketchLine_104.setName("SketchLine_109")
SketchLine_104.result().setName("SketchLine_109")
SketchLine_103.setName("SketchLine_108")
SketchLine_103.result().setName("SketchLine_108")
SketchLine_102.setName("SketchLine_107")
SketchLine_102.result().setName("SketchLine_107")
SketchArc_58.setName("SketchArc_59")
SketchArc_58.result().setName("SketchArc_59")
SketchArc_58.results()[1].setName("SketchArc_59_2")
SketchArc_57.setName("SketchArc_58")
SketchArc_57.result().setName("SketchArc_58")
SketchArc_57.results()[1].setName("SketchArc_58_2")
SketchArc_56.setName("SketchArc_57")
SketchArc_56.result().setName("SketchArc_57")
SketchArc_56.results()[1].setName("SketchArc_57_2")
SketchArc_55.setName("SketchArc_56")
SketchArc_55.result().setName("SketchArc_56")
SketchArc_55.results()[1].setName("SketchArc_56_2")
SketchArc_54.setName("SketchArc_55")
SketchArc_54.result().setName("SketchArc_55")
SketchArc_54.results()[1].setName("SketchArc_55_2")
SketchArc_53.setName("SketchArc_54")
SketchArc_53.result().setName("SketchArc_54")
SketchArc_53.results()[1].setName("SketchArc_54_2")
SketchArc_52.setName("SketchArc_53")
SketchArc_52.result().setName("SketchArc_53")
SketchArc_52.results()[1].setName("SketchArc_53_2")
SketchArc_51.setName("SketchArc_52")
SketchArc_51.result().setName("SketchArc_52")
SketchArc_51.results()[1].setName("SketchArc_52_2")
SketchArc_50.setName("SketchArc_51")
SketchArc_50.result().setName("SketchArc_51")
SketchArc_50.results()[1].setName("SketchArc_51_2")
SketchArc_49.setName("SketchArc_50")
SketchArc_49.result().setName("SketchArc_50")
SketchArc_49.results()[1].setName("SketchArc_50_2")
SketchArc_48.setName("SketchArc_49")
SketchArc_48.result().setName("SketchArc_49")
SketchArc_48.results()[1].setName("SketchArc_49_2")
SketchArc_47.setName("SketchArc_48")
SketchArc_47.result().setName("SketchArc_48")
SketchArc_47.results()[1].setName("SketchArc_48_2")
SketchArc_46.setName("SketchArc_47")
SketchArc_46.result().setName("SketchArc_47")
SketchArc_46.results()[1].setName("SketchArc_47_2")
SketchArc_45.setName("SketchArc_46")
SketchArc_45.result().setName("SketchArc_46")
SketchArc_45.results()[1].setName("SketchArc_46_2")
SketchArc_44.setName("SketchArc_45")
SketchArc_44.result().setName("SketchArc_45")
SketchArc_44.results()[1].setName("SketchArc_45_2")
SketchArc_43.setName("SketchArc_44")
SketchArc_43.result().setName("SketchArc_44")
SketchArc_43.results()[1].setName("SketchArc_44_2")
SketchArc_42.setName("SketchArc_43")
SketchArc_42.result().setName("SketchArc_43")
SketchArc_42.results()[1].setName("SketchArc_43_2")
SketchArc_41.setName("SketchArc_42")
SketchArc_41.result().setName("SketchArc_42")
SketchArc_41.results()[1].setName("SketchArc_42_2")
SketchArc_40.setName("SketchArc_41")
SketchArc_40.result().setName("SketchArc_41")
SketchArc_40.results()[1].setName("SketchArc_41_2")
SketchArc_39.setName("SketchArc_40")
SketchArc_39.result().setName("SketchArc_40")
SketchArc_39.results()[1].setName("SketchArc_40_2")
SketchArc_38.setName("SketchArc_39")
SketchArc_38.result().setName("SketchArc_39")
SketchArc_38.results()[1].setName("SketchArc_39_2")
SketchArc_37.setName("SketchArc_38")
SketchArc_37.result().setName("SketchArc_38")
SketchArc_37.results()[1].setName("SketchArc_38_2")
SketchArc_36.setName("SketchArc_37")
SketchArc_36.result().setName("SketchArc_37")
SketchArc_36.results()[1].setName("SketchArc_37_2")
SketchArc_35.setName("SketchArc_36")
SketchArc_35.result().setName("SketchArc_36")
SketchArc_35.results()[1].setName("SketchArc_36_2")
model.do()
Sketch_6.setName("Sketch_7")
Sketch_6.result().setName("Sketch_7")
ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchArc_20_2f-SketchArc_21_2f-SketchArc_22_2f-SketchArc_23_2f-SketchLine_91r-SketchLine_92f-SketchLine_93r-SketchLine_94f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_52_2f-SketchArc_53_2f-SketchArc_56_2f-SketchArc_57_2f-SketchLine_114r-SketchLine_115f-SketchLine_116r-SketchLine_121f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_44_2f-SketchArc_45_2f-SketchArc_48_2f-SketchArc_49_2f-SketchLine_107f-SketchLine_113f-SketchLine_117r-SketchLine_123r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_16_2f-SketchArc_17_2f-SketchArc_18_2f-SketchArc_19_2f-SketchLine_87f-SketchLine_88f-SketchLine_89r-SketchLine_90r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_11_2f-SketchArc_12_2f-SketchArc_14_2f-SketchLine_81f-SketchLine_82r-SketchLine_83f-SketchLine_84r-SketchArc_15_2f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_36_2f-SketchArc_38_2f-SketchArc_40_2f-SketchArc_41_2f-SketchLine_108r-SketchLine_119r-SketchLine_127f-SketchLine_129f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_37_2f-SketchArc_39_2f-SketchArc_42_2f-SketchArc_43_2f-SketchLine_118r-SketchLine_120f-SketchLine_122r-SketchLine_130f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_24_2f-SketchArc_25_2f-SketchArc_26_2f-SketchArc_27_2f-SketchLine_98f-SketchLine_100r-SketchLine_101f-SketchLine_103r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_30_2f-SketchArc_31_2f-SketchArc_34_2f-SketchArc_35_2f-SketchLine_95f-SketchLine_96r-SketchLine_97f-SketchLine_105r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_46_2f-SketchArc_47_2f-SketchArc_50_2f-SketchArc_51_2f-SketchLine_124f-SketchLine_125r-SketchLine_126f-SketchLine_128r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_54_2f-SketchArc_55_2f-SketchArc_58_2f-SketchArc_59_2f-SketchLine_109f-SketchLine_110r-SketchLine_111r-SketchLine_112f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_28_2f-SketchArc_29_2f-SketchArc_32_2f-SketchArc_33_2f-SketchLine_99r-SketchLine_102f-SketchLine_104f-SketchLine_106r")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_4_1")])
Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_5_1/Modfied_1"))
SketchLine_126 = Sketch_7.addLine(-153.5, -37.049990532747, -152.3000099350335, -37.0499905327475)
SketchLine_126.setName("SketchLine_135")
SketchLine_126.result().setName("SketchLine_135")
SketchLine_127 = Sketch_7.addLine(-150.8, -38.54999290880026, -150.8, -43.54999111476925)
SketchLine_127.setName("SketchLine_138")
SketchLine_127.result().setName("SketchLine_138")
SketchPoint_10 = Sketch_7.addPoint(model.selection("VERTEX", "Sketch_6/Vertex-SketchLine_67s-SketchLine_68e-SketchLine_69e"))
SketchPoint_10.setName("SketchPoint_12")
SketchPoint_10.result().setName("SketchPoint_12")
SketchLine_128 = Sketch_7.addLine(-150.8, -45.049990532747, -153.5, -45.04999053274734)
SketchLine_128.setName("SketchLine_131")
SketchLine_128.result().setName("SketchLine_131")
SketchLine_128.setAuxiliary(True)
SketchConstraintCoincidence_113 = Sketch_7.setCoincident(SketchLine_128.endPoint(), SketchPoint_10.result())
SketchConstraintCoincidence_113.setName("SketchConstraintCoincidence_120")
SketchLine_129 = Sketch_7.addLine(-153.5, -45.04999053274734, -153.5, -37.049990532747)
SketchLine_129.setName("SketchLine_132")
SketchLine_129.result().setName("SketchLine_132")
SketchLine_130 = Sketch_7.addLine(-152.2999985784279, -45.04999053274759, -153.5, -45.04999053274734)
SketchLine_130.setName("SketchLine_137")
SketchLine_130.result().setName("SketchLine_137")
SketchLine_131 = Sketch_7.addLine(-150.8, -37.04999053274745, -150.8, -45.049990532747)
SketchLine_131.setName("SketchLine_134")
SketchLine_131.result().setName("SketchLine_134")
SketchLine_131.setAuxiliary(True)
SketchConstraintCoincidence_114 = Sketch_7.setCoincident(SketchLine_131.endPoint(), SketchLine_128.startPoint())
SketchConstraintCoincidence_114.setName("SketchConstraintCoincidence_121")
SketchConstraintCoincidence_115 = Sketch_7.setCoincident(SketchLine_128.endPoint(), SketchLine_129.startPoint())
SketchConstraintCoincidence_115.setName("SketchConstraintCoincidence_122")
SketchLine_132 = Sketch_7.addLine(-153.5, -37.049990532747, -150.8, -37.04999053274745)
SketchLine_132.setName("SketchLine_133")
SketchLine_132.result().setName("SketchLine_133")
SketchLine_132.setAuxiliary(True)
SketchConstraintCoincidence_116 = Sketch_7.setCoincident(SketchLine_129.endPoint(), SketchLine_132.startPoint())
SketchConstraintCoincidence_116.setName("SketchConstraintCoincidence_123")
SketchConstraintCoincidence_117 = Sketch_7.setCoincident(SketchLine_132.endPoint(), SketchLine_131.startPoint())
SketchConstraintCoincidence_117.setName("SketchConstraintCoincidence_124")
SketchConstraintHorizontal_18 = Sketch_7.setHorizontal(SketchLine_128.result())
SketchConstraintVertical_15 = Sketch_7.setVertical(SketchLine_129.result())
SketchConstraintHorizontal_19 = Sketch_7.setHorizontal(SketchLine_132.result())
SketchConstraintVertical_16 = Sketch_7.setVertical(SketchLine_131.result())
SketchPoint_11 = Sketch_7.addPoint(model.selection("VERTEX", "Sketch_6/Vertex-SketchLine_70s-SketchLine_72s-SketchLine_71e"))
SketchPoint_11.setName("SketchPoint_13")
SketchPoint_11.result().setName("SketchPoint_13")
SketchConstraintCoincidence_118 = Sketch_7.setCoincident(SketchLine_132.endPoint(), SketchPoint_11.result())
SketchConstraintCoincidence_118.setName("SketchConstraintCoincidence_125")
SketchArc_59 = Sketch_7.addArc(-152.3, -38.54999053274712, -150.8, -38.54999290880026, -152.3000099350335, -37.0499905327475, False)
SketchArc_59.setName("SketchArc_60")
SketchArc_59.result().setName("SketchArc_60")
SketchArc_59.results()[1].setName("SketchArc_60_2")
SketchLine_133 = Sketch_7.addLine(-150.8, -38.54999290880026, -150.8, -45.049990532747)
SketchLine_133.setName("SketchLine_136")
SketchLine_133.result().setName("SketchLine_136")
SketchLine_133.setAuxiliary(True)
SketchConstraintCoincidence_119 = Sketch_7.setCoincident(SketchArc_59.startPoint(), SketchLine_133.startPoint())
SketchConstraintCoincidence_119.setName("SketchConstraintCoincidence_126")
SketchConstraintCoincidence_120 = Sketch_7.setCoincident(SketchArc_59.endPoint(), SketchLine_126.endPoint())
SketchConstraintCoincidence_120.setName("SketchConstraintCoincidence_127")
SketchConstraintTangent_13 = Sketch_7.setTangent(SketchArc_59.results()[1], SketchLine_126.result())
SketchConstraintTangent_14 = Sketch_7.setTangent(SketchArc_59.results()[1], SketchLine_133.result())
SketchConstraintCoincidence_121 = Sketch_7.setCoincident(SketchLine_132.startPoint(), SketchLine_126.startPoint())
SketchConstraintCoincidence_121.setName("SketchConstraintCoincidence_128")
SketchConstraintCoincidence_122 = Sketch_7.setCoincident(SketchLine_131.endPoint(), SketchLine_133.endPoint())
SketchConstraintCoincidence_122.setName("SketchConstraintCoincidence_129")
SketchConstraintCoincidence_123 = Sketch_7.setCoincident(SketchLine_126.endPoint(), SketchLine_132.result())
SketchConstraintCoincidence_123.setName("SketchConstraintCoincidence_130")
SketchConstraintCoincidence_124 = Sketch_7.setCoincident(SketchLine_133.startPoint(), SketchLine_131.result())
SketchConstraintCoincidence_124.setName("SketchConstraintCoincidence_131")
SketchArc_60 = Sketch_7.addArc(-152.3, -43.54999053274783, -152.2999985784279, -45.04999053274759, -150.8, -43.54999111476925, False)
SketchArc_60.setName("SketchArc_61")
SketchArc_60.result().setName("SketchArc_61")
SketchArc_60.results()[1].setName("SketchArc_61_2")
SketchConstraintCoincidence_125 = Sketch_7.setCoincident(SketchArc_60.startPoint(), SketchLine_130.startPoint())
SketchConstraintCoincidence_125.setName("SketchConstraintCoincidence_132")
SketchConstraintCoincidence_126 = Sketch_7.setCoincident(SketchArc_60.endPoint(), SketchLine_127.endPoint())
SketchConstraintCoincidence_126.setName("SketchConstraintCoincidence_133")
SketchConstraintTangent_15 = Sketch_7.setTangent(SketchArc_60.results()[1], SketchLine_130.result())
SketchConstraintTangent_16 = Sketch_7.setTangent(SketchArc_60.results()[1], SketchLine_127.result())
SketchConstraintCoincidence_127 = Sketch_7.setCoincident(SketchLine_128.endPoint(), SketchLine_130.endPoint())
SketchConstraintCoincidence_127.setName("SketchConstraintCoincidence_134")
SketchConstraintCoincidence_128 = Sketch_7.setCoincident(SketchLine_133.startPoint(), SketchLine_127.startPoint())
SketchConstraintCoincidence_128.setName("SketchConstraintCoincidence_135")
SketchConstraintCoincidence_129 = Sketch_7.setCoincident(SketchLine_130.startPoint(), SketchLine_128.result())
SketchConstraintCoincidence_129.setName("SketchConstraintCoincidence_136")
SketchConstraintCoincidence_130 = Sketch_7.setCoincident(SketchLine_127.endPoint(), SketchLine_133.result())
SketchConstraintCoincidence_130.setName("SketchConstraintCoincidence_137")
SketchConstraintRadius_6 = Sketch_7.setRadius(SketchArc_60.results()[1], 1.5)
SketchConstraintRadius_7 = Sketch_7.setRadius(SketchArc_59.results()[1], 1.5)
model.do()
Sketch_7.setName("Sketch_8")
Sketch_7.result().setName("Sketch_8")
ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_8")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_5_1")])
Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_6_1/Modfied_2"))
SketchLine_134 = Sketch_8.addLine(0.85, 50.75, -0.85, 50.75)
SketchLine_134.setName("SketchLine_139")
SketchLine_134.result().setName("SketchLine_139")
SketchLine_135 = Sketch_8.addLine(-0.85, 47.45, 0.85, 47.45)
SketchLine_135.setName("SketchLine_141")
SketchLine_135.result().setName("SketchLine_141")
SketchConstraintHorizontal_20 = Sketch_8.setHorizontal(SketchLine_134.result())
SketchConstraintHorizontal_21 = Sketch_8.setHorizontal(SketchLine_135.result())
SketchArc_61 = Sketch_8.addArc(0.85, 49.1, 0.85, 47.45, 0.85, 50.75, False)
SketchArc_61.setName("SketchArc_63")
SketchArc_61.result().setName("SketchArc_63")
SketchArc_61.results()[1].setName("SketchArc_63_2")
SketchConstraintCoincidence_131 = Sketch_8.setCoincident(SketchLine_134.startPoint(), SketchArc_61.endPoint())
SketchConstraintCoincidence_131.setName("SketchConstraintCoincidence_146")
SketchConstraintCoincidence_132 = Sketch_8.setCoincident(SketchArc_61.startPoint(), SketchLine_135.endPoint())
SketchConstraintCoincidence_132.setName("SketchConstraintCoincidence_148")
SketchConstraintDistance_17 = Sketch_8.setDistance(SketchLine_134.result(), SketchLine_135.endPoint(), 3.3)
SketchLine_136 = Sketch_8.addLine(0.85, 50.75, 0.85, 47.45)
SketchLine_136.setName("SketchLine_140")
SketchLine_136.result().setName("SketchLine_140")
SketchLine_136.setAuxiliary(True)
SketchConstraintCoincidence_133 = Sketch_8.setCoincident(SketchLine_134.startPoint(), SketchLine_136.startPoint())
SketchConstraintCoincidence_133.setName("SketchConstraintCoincidence_138")
SketchConstraintCoincidence_134 = Sketch_8.setCoincident(SketchArc_61.endPoint(), SketchLine_136.startPoint())
SketchConstraintCoincidence_134.setName("SketchConstraintCoincidence_139")
SketchConstraintCoincidence_135 = Sketch_8.setCoincident(SketchLine_135.endPoint(), SketchLine_136.endPoint())
SketchConstraintCoincidence_135.setName("SketchConstraintCoincidence_140")
SketchConstraintCoincidence_136 = Sketch_8.setCoincident(SketchArc_61.startPoint(), SketchLine_136.endPoint())
SketchConstraintCoincidence_136.setName("SketchConstraintCoincidence_141")
SketchLine_137 = Sketch_8.addLine(-0.85, 50.75, -0.85, 47.45)
SketchLine_137.setName("SketchLine_142")
SketchLine_137.result().setName("SketchLine_142")
SketchLine_137.setAuxiliary(True)
SketchConstraintCoincidence_137 = Sketch_8.setCoincident(SketchLine_134.endPoint(), SketchLine_137.startPoint())
SketchConstraintCoincidence_137.setName("SketchConstraintCoincidence_143")
SketchConstraintCoincidence_138 = Sketch_8.setCoincident(SketchLine_135.startPoint(), SketchLine_137.endPoint())
SketchConstraintCoincidence_138.setName("SketchConstraintCoincidence_147")
SketchConstraintMiddle_2 = Sketch_8.setMiddlePoint(SketchLine_136.result(), SketchArc_61.center())
SketchConstraintLength_10 = Sketch_8.setLength(SketchLine_134.result(), 1.7)
SketchConstraintLength_10.setName("SketchConstraintLength_11")
SketchConstraintVertical_17 = Sketch_8.setVertical(SketchLine_137.result())
SketchConstraintVertical_18 = Sketch_8.setVertical(SketchLine_136.result())
SketchLine_138 = Sketch_8.addLine(0.85, 50.75, -0.85, 47.45)
SketchLine_138.setName("SketchLine_143")
SketchLine_138.result().setName("SketchLine_143")
SketchLine_138.setAuxiliary(True)
SketchConstraintCoincidence_139 = Sketch_8.setCoincident(SketchLine_134.startPoint(), SketchLine_138.startPoint())
SketchConstraintCoincidence_139.setName("SketchConstraintCoincidence_150")
SketchConstraintCoincidence_140 = Sketch_8.setCoincident(SketchArc_61.endPoint(), SketchLine_138.startPoint())
SketchConstraintCoincidence_140.setName("SketchConstraintCoincidence_151")
SketchConstraintCoincidence_141 = Sketch_8.setCoincident(SketchLine_136.startPoint(), SketchLine_138.startPoint())
SketchConstraintCoincidence_141.setName("SketchConstraintCoincidence_152")
SketchConstraintCoincidence_142 = Sketch_8.setCoincident(SketchLine_135.startPoint(), SketchLine_138.endPoint())
SketchConstraintCoincidence_142.setName("SketchConstraintCoincidence_153")
SketchConstraintCoincidence_143 = Sketch_8.setCoincident(SketchLine_137.endPoint(), SketchLine_138.endPoint())
SketchConstraintCoincidence_143.setName("SketchConstraintCoincidence_155")
SketchPoint_12 = Sketch_8.addPoint(0, 49.1)
SketchPoint_12.setName("SketchPoint_14")
SketchPoint_12.result().setName("SketchPoint_14")
SketchConstraintCoincidence_144 = Sketch_8.setCoincident(SketchPoint_12.coordinates(), SketchLine_138.result())
SketchConstraintCoincidence_144.setName("SketchConstraintCoincidence_156")
SketchConstraintMiddle_3 = Sketch_8.setMiddlePoint(SketchLine_138.result(), SketchPoint_12.coordinates())
SketchConstraintMiddle_3.setName("SketchConstraintMiddle_4")
SketchProjection_2 = Sketch_8.addProjection(model.selection("EDGE", "PartSet/OY"))
SketchLine_139 = SketchProjection_2.createdFeature()
SketchLine_139.setName("SketchLine_144")
SketchLine_139.result().setName("SketchLine_144")
SketchConstraintCoincidence_145 = Sketch_8.setCoincident(SketchPoint_12.coordinates(), SketchLine_139.result())
SketchConstraintCoincidence_145.setName("SketchConstraintCoincidence_157")
SketchArc_62 = Sketch_8.addArc(-0.85, 49.1, -0.85, 50.75, -0.85, 47.45, False)
SketchConstraintCoincidence_146 = Sketch_8.setCoincident(SketchLine_135.startPoint(), SketchArc_62.endPoint())
SketchConstraintCoincidence_146.setName("SketchConstraintCoincidence_149")
SketchConstraintCoincidence_147 = Sketch_8.setCoincident(SketchLine_137.endPoint(), SketchArc_62.endPoint())
SketchConstraintCoincidence_147.setName("SketchConstraintCoincidence_154")
SketchConstraintCoincidence_148 = Sketch_8.setCoincident(SketchLine_138.endPoint(), SketchArc_62.endPoint())
SketchConstraintCoincidence_148.setName("SketchConstraintCoincidence_158")
SketchConstraintCoincidence_149 = Sketch_8.setCoincident(SketchArc_62.startPoint(), SketchLine_134.endPoint())
SketchConstraintCoincidence_149.setName("SketchConstraintCoincidence_159")
SketchConstraintMiddle_4 = Sketch_8.setMiddlePoint(SketchLine_137.result(), SketchArc_62.center())
SketchConstraintMiddle_4.setName("SketchConstraintMiddle_5")
SketchLine_140 = Sketch_8.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_5&ExtrusionCut_6_1/Modfied_2"))
SketchLine_140.setName("SketchLine_145")
SketchLine_140.result().setName("SketchLine_145")
SketchConstraintDistance_18 = Sketch_8.setDistance(SketchLine_140.result(), SketchPoint_12.coordinates(), 6)
SketchLine_141 = Sketch_8.addLine(0, 49.1, 107.43, 49.1)
SketchLine_141.setName("SketchLine_146")
SketchLine_141.result().setName("SketchLine_146")
SketchLine_141.setAuxiliary(True)
SketchConstraintCoincidence_150 = Sketch_8.setCoincident(SketchPoint_12.coordinates(), SketchLine_141.startPoint())
SketchConstraintCoincidence_150.setName("SketchConstraintCoincidence_160")
SketchConstraintHorizontal_22 = Sketch_8.setHorizontal(SketchLine_141.result())
SketchConstraintLength_11 = Sketch_8.setLength(SketchLine_141.result(), 107.43)
SketchConstraintLength_11.setName("SketchConstraintLength_12")
SketchMultiTranslation_4_objects = [SketchLine_134.result(), SketchLine_135.result(), SketchArc_61.results()[1], SketchArc_62.results()[1]]
SketchMultiTranslation_4 = Sketch_8.addTranslation(SketchMultiTranslation_4_objects, SketchPoint_12.coordinates(), SketchLine_141.endPoint(), 2)
[SketchLine_142, SketchLine_143, SketchArc_63, SketchArc_64] = SketchMultiTranslation_4.translated()
SketchArc_64.setName("SketchArc_65")
SketchArc_64.result().setName("SketchArc_65")
SketchArc_64.results()[1].setName("SketchArc_65_2")
SketchArc_63.setName("SketchArc_64")
SketchArc_63.result().setName("SketchArc_64")
SketchArc_63.results()[1].setName("SketchArc_64_2")
SketchLine_143.setName("SketchLine_148")
SketchLine_143.result().setName("SketchLine_148")
SketchLine_142.setName("SketchLine_147")
SketchLine_142.result().setName("SketchLine_147")
SketchConstraintMirror_6_objects = [SketchArc_63.results()[1], SketchArc_64.results()[1], SketchLine_142.result(), SketchLine_143.result()]
SketchConstraintMirror_6 = Sketch_8.addMirror(SketchLine_139.result(), SketchConstraintMirror_6_objects)
[SketchArc_65, SketchArc_66, SketchLine_144, SketchLine_145] = SketchConstraintMirror_6.mirrored()
SketchLine_145.setName("SketchLine_150")
SketchLine_145.result().setName("SketchLine_150")
SketchLine_144.setName("SketchLine_149")
SketchLine_144.result().setName("SketchLine_149")
SketchArc_66.setName("SketchArc_67")
SketchArc_66.result().setName("SketchArc_67")
SketchArc_66.results()[1].setName("SketchArc_67_2")
SketchArc_65.setName("SketchArc_66")
SketchArc_65.result().setName("SketchArc_66")
SketchArc_65.results()[1].setName("SketchArc_66_2")
model.do()
Sketch_8.setName("Sketch_9")
Sketch_8.result().setName("Sketch_9")
ExtrusionCut_7 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_9/Face-SketchLine_147f-SketchLine_148f-SketchArc_64_2f-SketchArc_65_2f"), model.selection("FACE", "Sketch_9/Face-SketchLine_139f-SketchLine_141f-SketchArc_63_2f-SketchArc_62_2f"), model.selection("FACE", "Sketch_9/Face-SketchArc_66_2f-SketchArc_67_2f-SketchLine_149r-SketchLine_150r")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_6_1")])
model.do()

# Test reexecution after parameter change
Parameter_H.setValue(0.4)
model.do()
model.testResultsVolumes(ExtrusionCut_7, [5641.450357292746048187837004662])
Parameter_H.setValue(0.3)
model.end()

from GeomAPI import GeomAPI_Shape

model.testNbResults(ExtrusionCut_7, 1)
model.testNbSubResults(ExtrusionCut_7, [0])
model.testNbSubShapes(ExtrusionCut_7, GeomAPI_Shape.SOLID, [1])
model.testNbSubShapes(ExtrusionCut_7, GeomAPI_Shape.FACE, [156])
model.testNbSubShapes(ExtrusionCut_7, GeomAPI_Shape.EDGE, [916])
model.testNbSubShapes(ExtrusionCut_7, GeomAPI_Shape.VERTEX, [1832])
model.testResultsVolumes(ExtrusionCut_7, [5345.689484659372283203992992640])

assert(model.checkPythonDump)