test.models/case24.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 from SketchAPI import *
  22
  23 from salome.shaper import model
  24
  25 model.begin()
  26 partSet = model.moduleDocument()
  27 Part_1 = model.addPart(partSet)
  28 Part_1_doc = Part_1.document()
  29 Parameter_R = model.addParameter(Part_1_doc, "R", "3")
  30 model.addParameter(Part_1_doc, "DBody", "65")
  31 Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/YOZ"), 89, False)
  32 Sketch_1 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
  33 SketchLine_1 = Sketch_1.addLine(0, 20, 16.99998550401508, 20)
  34 SketchLine_1.setName("SketchLine_7")
  35 SketchLine_1.result().setName("SketchLine_7")
  36 SketchLine_2 = Sketch_1.addLine(20, 0, 0, 0)
  37 SketchLine_2.setName("SketchLine_1")
  38 SketchLine_2.result().setName("SketchLine_1")
  39 SketchLine_3 = Sketch_1.addLine(0, 0, 0, 20)
  40 SketchLine_3.setName("SketchLine_2")
  41 SketchLine_3.result().setName("SketchLine_2")
  42 SketchLine_4 = Sketch_1.addLine(20, 16.99999846116062, 20, 0)
  43 SketchLine_4.setName("SketchLine_8")
  44 SketchLine_4.result().setName("SketchLine_8")
  45 SketchLine_5 = Sketch_1.addLine(20, 20, 20, 0)
  46 SketchLine_5.setName("SketchLine_4")
  47 SketchLine_5.result().setName("SketchLine_4")
  48 SketchLine_5.setAuxiliary(True)
  49 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_2.startPoint())
  50 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  51 SketchLine_6 = Sketch_1.addLine(0, 20, 20, 20)
  52 SketchLine_6.setName("SketchLine_3")
  53 SketchLine_6.result().setName("SketchLine_3")
  54 SketchLine_6.setAuxiliary(True)
  55 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_6.startPoint())
  56 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_5.startPoint())
  57 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_2.result())
  58 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_3.result())
  59 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_6.result())
  60 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_5.result())
  61 SketchProjection_1 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OZ"))
  62 SketchLine_7 = SketchProjection_1.createdFeature()
  63 SketchLine_7.setName("SketchLine_5")
  64 SketchLine_7.result().setName("SketchLine_5")
  65 SketchProjection_2 = Sketch_1.addProjection(model.selection("EDGE", "PartSet/OY"))
  66 SketchLine_8 = SketchProjection_2.createdFeature()
  67 SketchLine_8.setName("SketchLine_6")
  68 SketchLine_8.result().setName("SketchLine_6")
  69 SketchArc_1 = Sketch_1.addArc(17, 17, 20, 16.99999846116062, 16.99998550401508, 20, False)
  70 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_4.startPoint())
  71 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_1.endPoint())
  72 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_1.result())
  73 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_4.result())
  74 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_6.startPoint(), SketchLine_1.startPoint())
  75 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_4.endPoint())
  76 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_6.result())
  77 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_4.startPoint(), SketchLine_5.result())
  78 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "R")
  79 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchAPI_Line(SketchLine_7).startPoint())
  80 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_2.startPoint(), SketchLine_3.result(), 20)
  81 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_3.endPoint(), SketchLine_2.result(), 20)
  82 model.do()
  83 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_7r-SketchLine_1r-SketchLine_2r-SketchLine_8r-SketchArc_1_2f")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_2"), 0, 180)
  84 ExtrusionFuse_1 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_7r-SketchLine_1r-SketchLine_2r-SketchLine_8r-SketchArc_1_2f")], model.selection(), 0, 25, [model.selection("SOLID", "Revolution_1_1")])
  85 ExtrusionFuse_1.result().setName("ExtrusionFuse_1_1")
  86 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
  87 SketchLine_9 = Sketch_2.addLine(0, 20, -17.00000285538278, 20)
  88 SketchLine_9.setName("SketchLine_13")
  89 SketchLine_9.result().setName("SketchLine_13")
  90 SketchLine_10 = Sketch_2.addLine(-20, 0, 0, 0)
  91 SketchLine_10.setName("SketchLine_9")
  92 SketchLine_10.result().setName("SketchLine_9")
  93 SketchPoint_1 = Sketch_2.addPoint(model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_2s-SketchProjection_1s-SketchLine_5s-SketchProjection_2s-SketchLine_6s-SketchLine_1e"))
  94 SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchPoint_1.result())
  95 SketchLine_11 = Sketch_2.addLine(0, 0, 0, 20)
  96 SketchLine_11.setName("SketchLine_10")
  97 SketchLine_11.result().setName("SketchLine_10")
  98 SketchLine_12 = Sketch_2.addLine(-20, 17.00000633266883, -20, 0)
  99 SketchLine_12.setName("SketchLine_14")
 100 SketchLine_12.result().setName("SketchLine_14")
 101 SketchLine_13 = Sketch_2.addLine(-20, 20, -20, 0)
 102 SketchLine_13.setName("SketchLine_12")
 103 SketchLine_13.result().setName("SketchLine_12")
 104 SketchLine_13.setAuxiliary(True)
 105 SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_10.startPoint())
 106 SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
 107 SketchLine_14 = Sketch_2.addLine(0, 20, -20, 20)
 108 SketchLine_14.setName("SketchLine_11")
 109 SketchLine_14.result().setName("SketchLine_11")
 110 SketchLine_14.setAuxiliary(True)
 111 SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchLine_14.startPoint())
 112 SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_13.startPoint())
 113 SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_10.result())
 114 SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_11.result())
 115 SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_14.result())
 116 SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_13.result())
 117 SketchArc_2 = Sketch_2.addArc(-17, 17, -17.00000285538278, 20, -20, 17.00000633266883, False)
 118 SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchArc_2.startPoint(), SketchLine_9.endPoint())
 119 SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchArc_2.endPoint(), SketchLine_12.startPoint())
 120 SketchConstraintTangent_3 = Sketch_2.setTangent(SketchArc_2.results()[1], SketchLine_9.result())
 121 SketchConstraintTangent_4 = Sketch_2.setTangent(SketchArc_2.results()[1], SketchLine_12.result())
 122 SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchLine_14.startPoint(), SketchLine_9.startPoint())
 123 SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_12.endPoint())
 124 SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_14.result())
 125 SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchLine_12.startPoint(), SketchLine_13.result())
 126 SketchConstraintRadius_2 = Sketch_2.setRadius(SketchArc_2.results()[1], 3)
 127 SketchConstraintDistance_3 = Sketch_2.setDistance(SketchLine_10.startPoint(), SketchLine_11.result(), 20)
 128 SketchConstraintDistance_4 = Sketch_2.setDistance(SketchLine_11.endPoint(), SketchLine_10.result(), 20)
 129 model.do()
 130 ExtrusionFuse_2 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_13f-SketchLine_9f-SketchLine_10f-SketchLine_14f-SketchArc_2_2f")], model.selection(), 0, 25, [model.selection("SOLID", "ExtrusionFuse_1_1")])
 131 ExtrusionFuse_2.result().setName("ExtrusionFuse_2_1")
 132 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_2_1/Modfied_8"))
 133 SketchLine_15 = Sketch_3.addLine(0, -20, -17.00000002635728, -20)
 134 SketchLine_15.setName("SketchLine_19")
 135 SketchLine_15.result().setName("SketchLine_19")
 136 SketchLine_16 = Sketch_3.addLine(-20, 0, 0, 0)
 137 SketchLine_16.setName("SketchLine_15")
 138 SketchLine_16.result().setName("SketchLine_15")
 139 SketchPoint_2 = Sketch_3.addPoint(model.selection("VERTEX", "ExtrusionFuse_2_1/Modfied_7&ExtrusionFuse_2_1/Modfied_6&ExtrusionFuse_2_1/Modfied_8&ExtrusionFuse_2_1/Modfied_9"))
 140 SketchConstraintCoincidence_23 = Sketch_3.setCoincident(SketchLine_16.endPoint(), SketchPoint_2.result())
 141 SketchLine_17 = Sketch_3.addLine(0, 0, 0, -20)
 142 SketchLine_17.setName("SketchLine_16")
 143 SketchLine_17.result().setName("SketchLine_16")
 144 SketchLine_18 = Sketch_3.addLine(-20, -16.99998301947517, -20, 0)
 145 SketchLine_18.setName("SketchLine_20")
 146 SketchLine_18.result().setName("SketchLine_20")
 147 SketchLine_19 = Sketch_3.addLine(-20, -20, -20, 0)
 148 SketchLine_19.setName("SketchLine_18")
 149 SketchLine_19.result().setName("SketchLine_18")
 150 SketchLine_19.setAuxiliary(True)
 151 SketchConstraintCoincidence_24 = Sketch_3.setCoincident(SketchLine_19.endPoint(), SketchLine_16.startPoint())
 152 SketchConstraintCoincidence_25 = Sketch_3.setCoincident(SketchLine_16.endPoint(), SketchLine_17.startPoint())
 153 SketchLine_20 = Sketch_3.addLine(0, -20, -20, -20)
 154 SketchLine_20.setName("SketchLine_17")
 155 SketchLine_20.result().setName("SketchLine_17")
 156 SketchLine_20.setAuxiliary(True)
 157 SketchConstraintCoincidence_26 = Sketch_3.setCoincident(SketchLine_17.endPoint(), SketchLine_20.startPoint())
 158 SketchConstraintCoincidence_27 = Sketch_3.setCoincident(SketchLine_20.endPoint(), SketchLine_19.startPoint())
 159 SketchConstraintHorizontal_5 = Sketch_3.setHorizontal(SketchLine_16.result())
 160 SketchConstraintVertical_5 = Sketch_3.setVertical(SketchLine_17.result())
 161 SketchConstraintHorizontal_6 = Sketch_3.setHorizontal(SketchLine_20.result())
 162 SketchConstraintVertical_6 = Sketch_3.setVertical(SketchLine_19.result())
 163 SketchArc_3 = Sketch_3.addArc(-17, -17, -20, -16.99998301947517, -17.00000002635728, -20, False)
 164 SketchConstraintCoincidence_28 = Sketch_3.setCoincident(SketchArc_3.startPoint(), SketchLine_18.startPoint())
 165 SketchConstraintCoincidence_29 = Sketch_3.setCoincident(SketchArc_3.endPoint(), SketchLine_15.endPoint())
 166 SketchConstraintTangent_5 = Sketch_3.setTangent(SketchArc_3.results()[1], SketchLine_15.result())
 167 SketchConstraintTangent_6 = Sketch_3.setTangent(SketchArc_3.results()[1], SketchLine_18.result())
 168 SketchConstraintCoincidence_30 = Sketch_3.setCoincident(SketchLine_20.startPoint(), SketchLine_15.startPoint())
 169 SketchConstraintCoincidence_31 = Sketch_3.setCoincident(SketchLine_19.endPoint(), SketchLine_18.endPoint())
 170 SketchConstraintCoincidence_32 = Sketch_3.setCoincident(SketchLine_15.endPoint(), SketchLine_20.result())
 171 SketchConstraintCoincidence_33 = Sketch_3.setCoincident(SketchLine_18.startPoint(), SketchLine_19.result())
 172 SketchConstraintRadius_3 = Sketch_3.setRadius(SketchArc_3.results()[1], 3)
 173 SketchConstraintDistance_5 = Sketch_3.setDistance(SketchLine_15.startPoint(), SketchLine_16.result(), 20)
 174 SketchConstraintDistance_6 = Sketch_3.setDistance(SketchLine_18.endPoint(), SketchLine_17.result(), 20)
 175 SketchLine_21 = Sketch_3.addLine(-23, -0.01462093666115485, -23, -19.98755081419712)
 176 SketchConstraintParallel_1 = Sketch_3.setParallel(SketchLine_17.result(), SketchLine_21.result())
 177 SketchConstraintDistance_7 = Sketch_3.setDistance(SketchLine_21.startPoint(), SketchLine_18.result(), 3)
 178 model.do()
 179 RevolutionFuse_1 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection("EDGE", "Sketch_3/Edge-SketchLine_21"), 71, 0, [model.selection("SOLID", "ExtrusionFuse_2_1")])
 180 RevolutionFuse_1.result().setName("RevolutionFuse_1_1")
 181 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "RevolutionFuse_1_1/Modfied_7"))
 182 SketchLine_22 = Sketch_4.addLine(-3, -20, 17.00000452949485, -20)
 183 SketchLine_22.setName("SketchLine_26")
 184 SketchLine_22.result().setName("SketchLine_26")
 185 SketchLine_23 = Sketch_4.addLine(20, 0, -3, 0)
 186 SketchLine_23.setName("SketchLine_22")
 187 SketchLine_23.result().setName("SketchLine_22")
 188 SketchLine_24 = Sketch_4.addLine(-3, 0, -3, -20)
 189 SketchLine_24.setName("SketchLine_23")
 190 SketchLine_24.result().setName("SketchLine_23")
 191 SketchLine_25 = Sketch_4.addLine(20, -17.00001580618423, 20, 0)
 192 SketchLine_25.setName("SketchLine_27")
 193 SketchLine_25.result().setName("SketchLine_27")
 194 SketchLine_26 = Sketch_4.addLine(20, -20, 20, 0)
 195 SketchLine_26.setName("SketchLine_25")
 196 SketchLine_26.result().setName("SketchLine_25")
 197 SketchLine_26.setAuxiliary(True)
 198 SketchConstraintCoincidence_34 = Sketch_4.setCoincident(SketchLine_26.endPoint(), SketchLine_23.startPoint())
 199 SketchConstraintCoincidence_35 = Sketch_4.setCoincident(SketchLine_23.endPoint(), SketchLine_24.startPoint())
 200 SketchLine_27 = Sketch_4.addLine(-3, -20, 20, -20)
 201 SketchLine_27.setName("SketchLine_24")
 202 SketchLine_27.result().setName("SketchLine_24")
 203 SketchLine_27.setAuxiliary(True)
 204 SketchConstraintCoincidence_36 = Sketch_4.setCoincident(SketchLine_24.endPoint(), SketchLine_27.startPoint())
 205 SketchConstraintCoincidence_37 = Sketch_4.setCoincident(SketchLine_27.endPoint(), SketchLine_26.startPoint())
 206 SketchConstraintHorizontal_7 = Sketch_4.setHorizontal(SketchLine_23.result())
 207 SketchConstraintVertical_7 = Sketch_4.setVertical(SketchLine_24.result())
 208 SketchConstraintHorizontal_8 = Sketch_4.setHorizontal(SketchLine_27.result())
 209 SketchConstraintVertical_8 = Sketch_4.setVertical(SketchLine_26.result())
 210 SketchArc_4 = Sketch_4.addArc(17, -17, 17.00000452949485, -20, 20, -17.00001580618423, False)
 211 SketchConstraintCoincidence_38 = Sketch_4.setCoincident(SketchArc_4.startPoint(), SketchLine_22.endPoint())
 212 SketchConstraintCoincidence_39 = Sketch_4.setCoincident(SketchArc_4.endPoint(), SketchLine_25.startPoint())
 213 SketchConstraintTangent_7 = Sketch_4.setTangent(SketchArc_4.results()[1], SketchLine_22.result())
 214 SketchConstraintTangent_8 = Sketch_4.setTangent(SketchArc_4.results()[1], SketchLine_25.result())
 215 SketchConstraintCoincidence_40 = Sketch_4.setCoincident(SketchLine_27.startPoint(), SketchLine_22.startPoint())
 216 SketchConstraintCoincidence_41 = Sketch_4.setCoincident(SketchLine_26.endPoint(), SketchLine_25.endPoint())
 217 SketchConstraintCoincidence_42 = Sketch_4.setCoincident(SketchLine_22.endPoint(), SketchLine_27.result())
 218 SketchConstraintCoincidence_43 = Sketch_4.setCoincident(SketchLine_25.startPoint(), SketchLine_26.result())
 219 SketchConstraintRadius_4 = Sketch_4.setRadius(SketchArc_4.results()[1], 3)
 220 SketchLine_28 = Sketch_4.addLine(model.selection("EDGE", "Sketch_3/Edge-SketchLine_15"))
 221 SketchConstraintCoincidence_44 = Sketch_4.setCoincident(SketchLine_24.startPoint(), SketchLine_28.result())
 222 SketchConstraintDistance_8 = Sketch_4.setDistance(SketchLine_22.endPoint(), SketchLine_23.result(), 20)
 223 SketchConstraintDistance_9 = Sketch_4.setDistance(SketchLine_28.endPoint(), SketchLine_25.result(), 20)
 224 SketchConstraintDistance_10 = Sketch_4.setDistance(SketchLine_24.result(), SketchLine_28.endPoint(), 3)
 225 SketchLine_29 = Sketch_4.addLine(23, -0.2448405100241045, 23, -19.61338093143246)
 226 SketchConstraintParallel_2 = Sketch_4.setParallel(SketchLine_25.result(), SketchLine_29.result())
 227 SketchConstraintDistance_11 = Sketch_4.setDistance(SketchLine_23.startPoint(), SketchLine_29.result(), 3)
 228 model.do()
 229 RevolutionFuse_2 = model.addRevolutionFuse(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchLine_26f-SketchLine_22f-SketchLine_23f-SketchLine_27f-SketchArc_4_2f")], model.selection("EDGE", "Sketch_4/Edge-SketchLine_29"), 0, 71, [model.selection("SOLID", "RevolutionFuse_1_1")])
 230 RevolutionFuse_2.result().setName("RevolutionFuse_2_1")
 231 Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOZ"))
 232 SketchLine_30 = Sketch_5.addLine(0, 0, 0, 82)
 233 SketchLine_31 = Sketch_5.addLine(model.selection("EDGE", "PartSet/OZ"))
 234 SketchConstraintCoincidence_45 = Sketch_5.setCoincident(SketchLine_30.endPoint(), SketchLine_31.result())
 235 SketchLine_32 = Sketch_5.addLine(27.41618692363446, 77.00000000000001, 58.99998109391454, 77.00000000000001)
 236 SketchLine_32.setName("SketchLine_39")
 237 SketchLine_32.result().setName("SketchLine_39")
 238 SketchLine_33 = Sketch_5.addLine(0, 82, 20, 82)
 239 SketchLine_33.setName("SketchLine_32")
 240 SketchLine_33.result().setName("SketchLine_32")
 241 SketchConstraintCoincidence_46 = Sketch_5.setCoincident(SketchLine_30.endPoint(), SketchLine_33.startPoint())
 242 SketchLine_34 = Sketch_5.addLine(65, 70.99999917134223, 65, 0)
 243 SketchLine_34.setName("SketchLine_40")
 244 SketchLine_34.result().setName("SketchLine_40")
 245 SketchLine_35 = Sketch_5.addLine(27.41618692363446, 77.00000000000001, 65, 77.00000000000001)
 246 SketchLine_35.setName("SketchLine_34")
 247 SketchLine_35.result().setName("SketchLine_34")
 248 SketchLine_35.setAuxiliary(True)
 249 SketchLine_36 = Sketch_5.addLine(65, 77.00000000000001, 65, 0)
 250 SketchLine_36.setName("SketchLine_35")
 251 SketchLine_36.result().setName("SketchLine_35")
 252 SketchLine_36.setAuxiliary(True)
 253 SketchConstraintCoincidence_47 = Sketch_5.setCoincident(SketchLine_35.endPoint(), SketchLine_36.startPoint())
 254 SketchConstraintCoincidence_47.setName("SketchConstraintCoincidence_49")
 255 SketchLine_37 = Sketch_5.addLine(65, 0, 0, 0)
 256 SketchLine_37.setName("SketchLine_38")
 257 SketchLine_37.result().setName("SketchLine_38")
 258 SketchConstraintCoincidence_48 = Sketch_5.setCoincident(SketchLine_30.startPoint(), SketchLine_37.endPoint())
 259 SketchConstraintCoincidence_48.setName("SketchConstraintCoincidence_53")
 260 SketchConstraintCoincidence_49 = Sketch_5.setCoincident(SketchLine_37.endPoint(), SketchLine_31.startPoint())
 261 SketchConstraintCoincidence_49.setName("SketchConstraintCoincidence_54")
 262 SketchConstraintHorizontal_9 = Sketch_5.setHorizontal(SketchLine_37.result())
 263 SketchConstraintVertical_9 = Sketch_5.setVertical(SketchLine_36.result())
 264 SketchConstraintHorizontal_10 = Sketch_5.setHorizontal(SketchLine_33.result())
 265 SketchConstraintHorizontal_11 = Sketch_5.setHorizontal(SketchLine_35.result())
 266 SketchConstraintDistance_12 = Sketch_5.setDistance(SketchLine_33.endPoint(), SketchLine_35.result(), 5)
 267 SketchConstraintDistance_12.setName("SketchConstraintDistance_14")
 268 SketchConstraintDistance_13 = Sketch_5.setDistance(SketchLine_30.endPoint(), SketchLine_37.result(), 82)
 269 SketchConstraintDistance_13.setName("SketchConstraintDistance_15")
 270 SketchArc_5 = Sketch_5.addArc(59, 70.99999999999999, 65, 70.99999917134223, 58.99998109391454, 77.00000000000001, False)
 271 SketchArc_5.setName("SketchArc_6")
 272 SketchArc_5.result().setName("SketchArc_6")
 273 SketchArc_5.results()[1].setName("SketchArc_6_2")
 274 SketchConstraintCoincidence_50 = Sketch_5.setCoincident(SketchArc_5.startPoint(), SketchLine_34.startPoint())
 275 SketchConstraintCoincidence_50.setName("SketchConstraintCoincidence_57")
 276 SketchConstraintCoincidence_51 = Sketch_5.setCoincident(SketchArc_5.endPoint(), SketchLine_32.endPoint())
 277 SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_58")
 278 SketchConstraintTangent_9 = Sketch_5.setTangent(SketchArc_5.results()[1], SketchLine_32.result())
 279 SketchConstraintTangent_9.setName("SketchConstraintTangent_10")
 280 SketchConstraintTangent_10 = Sketch_5.setTangent(SketchArc_5.results()[1], SketchLine_34.result())
 281 SketchConstraintTangent_10.setName("SketchConstraintTangent_11")
 282 SketchConstraintCoincidence_52 = Sketch_5.setCoincident(SketchLine_35.startPoint(), SketchLine_32.startPoint())
 283 SketchConstraintCoincidence_52.setName("SketchConstraintCoincidence_59")
 284 SketchConstraintCoincidence_53 = Sketch_5.setCoincident(SketchLine_36.endPoint(), SketchLine_34.endPoint())
 285 SketchConstraintCoincidence_53.setName("SketchConstraintCoincidence_60")
 286 SketchConstraintCoincidence_54 = Sketch_5.setCoincident(SketchLine_32.endPoint(), SketchLine_35.result())
 287 SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_61")
 288 SketchConstraintCoincidence_55 = Sketch_5.setCoincident(SketchLine_34.startPoint(), SketchLine_36.result())
 289 SketchConstraintCoincidence_55.setName("SketchConstraintCoincidence_62")
 290 SketchConstraintRadius_5 = Sketch_5.setRadius(SketchArc_5.results()[1], 6)
 291 SketchConstraintRadius_5.setName("SketchConstraintRadius_6")
 292 SketchArc_6 = Sketch_5.addArc(27.41619848709567, 84.99999999999999, 27.41618692363446, 77.00000000000001, 20, 82, True)
 293 SketchArc_6.setName("SketchArc_7")
 294 SketchArc_6.result().setName("SketchArc_7")
 295 SketchArc_6.results()[1].setName("SketchArc_7_2")
 296 SketchConstraintCoincidence_56 = Sketch_5.setCoincident(SketchArc_6.startPoint(), SketchLine_32.startPoint())
 297 SketchConstraintCoincidence_56.setName("SketchConstraintCoincidence_63")
 298 SketchConstraintTangent_11 = Sketch_5.setTangent(SketchArc_6.results()[1], SketchLine_32.result())
 299 SketchConstraintTangent_11.setName("SketchConstraintTangent_12")
 300 SketchConstraintCoincidence_57 = Sketch_5.setCoincident(SketchLine_33.endPoint(), SketchArc_6.endPoint())
 301 SketchConstraintCoincidence_57.setName("SketchConstraintCoincidence_64")
 302 SketchConstraintRadius_6 = Sketch_5.setRadius(SketchArc_6.results()[1], 8)
 303 SketchConstraintRadius_6.setName("SketchConstraintRadius_7")
 304 SketchConstraintDistance_14 = Sketch_5.setDistance(SketchLine_33.endPoint(), SketchLine_30.result(), 20)
 305 SketchConstraintDistance_14.setName("SketchConstraintDistance_17")
 306 SketchConstraintCoincidence_59 = Sketch_5.setCoincident(SketchLine_34.endPoint(), SketchLine_37.startPoint())
 307 SketchConstraintCoincidence_59.setName("SketchConstraintCoincidence_66")
 308 SketchConstraintDistance_15 = Sketch_5.setDistance(SketchLine_37.startPoint(), SketchLine_30.result(), "DBody")
 309 SketchConstraintDistance_15.setName("SketchConstraintDistance_16")
 310 model.do()
 311 RevolutionFuse_3 = model.addRevolutionFuse(Part_1_doc, [model.selection("WIRE", "Sketch_5/Wire-SketchLine_30r-SketchLine_39r-SketchLine_32r-SketchLine_40r-SketchLine_38r-SketchArc_6_2f-SketchArc_7_2r")], model.selection("EDGE", "PartSet/OZ"), 45, 315, [model.selection("SOLID", "RevolutionFuse_2_1")])
 312 RevolutionFuse_3.result().setName("RevolutionFuse_3_1")
 313 Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/YOZ"))
 314 SketchLine_38 = Sketch_6.addLine(19.99999999999999, 60, -20, 60)
 315 SketchLine_38.setName("SketchLine_48")
 316 SketchLine_38.result().setName("SketchLine_48")
 317 SketchLine_39 = Sketch_6.addLine(-20, 30, 20, 30)
 318 SketchLine_39.setName("SketchLine_52")
 319 SketchLine_39.result().setName("SketchLine_52")
 320 SketchLine_40 = Sketch_6.addLine(-20, 60, -20, 30)
 321 SketchLine_40.setName("SketchLine_51")
 322 SketchLine_40.result().setName("SketchLine_51")
 323 SketchLine_41 = Sketch_6.addLine(20, 30, 19.99999999999999, 60)
 324 SketchLine_41.setName("SketchLine_50")
 325 SketchLine_41.result().setName("SketchLine_50")
 326 SketchLine_43 = Sketch_6.addLine(-19.99999999999998, 30.00000000000001, 20, 30.00000000000001)
 327 SketchLine_43.setName("SketchLine_41")
 328 SketchLine_43.result().setName("SketchLine_41")
 329 SketchLine_43.setAuxiliary(True)
 330 SketchLine_42 = Sketch_6.addLine(-19.99999999999999, 60, -19.99999999999998, 30.00000000000001)
 331 SketchLine_42.setName("SketchLine_44")
 332 SketchLine_42.result().setName("SketchLine_44")
 333 SketchLine_42.setAuxiliary(True)
 334 SketchConstraintCoincidence_60 = Sketch_6.setCoincident(SketchLine_42.endPoint(), SketchLine_43.startPoint())
 335 SketchConstraintCoincidence_60.setName("SketchConstraintCoincidence_67")
 336 SketchLine_44 = Sketch_6.addLine(20, 30.00000000000001, 19.99999999999998, 60)
 337 SketchLine_44.setName("SketchLine_42")
 338 SketchLine_44.result().setName("SketchLine_42")
 339 SketchLine_44.setAuxiliary(True)
 340 SketchConstraintCoincidence_61 = Sketch_6.setCoincident(SketchLine_43.endPoint(), SketchLine_44.startPoint())
 341 SketchConstraintCoincidence_61.setName("SketchConstraintCoincidence_68")
 342 SketchLine_45 = Sketch_6.addLine(19.99999999999998, 60, -19.99999999999999, 60)
 343 SketchLine_45.setName("SketchLine_43")
 344 SketchLine_45.result().setName("SketchLine_43")
 345 SketchLine_45.setAuxiliary(True)
 346 SketchConstraintCoincidence_62 = Sketch_6.setCoincident(SketchLine_44.endPoint(), SketchLine_45.startPoint())
 347 SketchConstraintCoincidence_62.setName("SketchConstraintCoincidence_69")
 348 SketchConstraintCoincidence_63 = Sketch_6.setCoincident(SketchLine_45.endPoint(), SketchLine_42.startPoint())
 349 SketchConstraintCoincidence_63.setName("SketchConstraintCoincidence_70")
 350 SketchConstraintHorizontal_12 = Sketch_6.setHorizontal(SketchLine_43.result())
 351 SketchConstraintVertical_10 = Sketch_6.setVertical(SketchLine_44.result())
 352 SketchConstraintHorizontal_13 = Sketch_6.setHorizontal(SketchLine_45.result())
 353 SketchConstraintVertical_11 = Sketch_6.setVertical(SketchLine_42.result())
 354 SketchLine_46 = Sketch_6.addLine(19.99999999999998, 60, -20, 60)
 355 SketchLine_46.setName("SketchLine_45")
 356 SketchLine_46.result().setName("SketchLine_45")
 357 SketchLine_46.setAuxiliary(True)
 358 SketchConstraintCoincidence_64 = Sketch_6.setCoincident(SketchLine_45.startPoint(), SketchLine_46.startPoint())
 359 SketchConstraintCoincidence_64.setName("SketchConstraintCoincidence_73")
 360 SketchLine_47 = Sketch_6.addLine(-20, 60, -19.99999999999998, 30.00000000000001)
 361 SketchLine_47.setName("SketchLine_46")
 362 SketchLine_47.result().setName("SketchLine_46")
 363 SketchLine_47.setAuxiliary(True)
 364 SketchConstraintCoincidence_65 = Sketch_6.setCoincident(SketchLine_42.endPoint(), SketchLine_47.endPoint())
 365 SketchConstraintCoincidence_65.setName("SketchConstraintCoincidence_74")
 366 SketchConstraintCoincidence_66 = Sketch_6.setCoincident(SketchLine_46.endPoint(), SketchLine_45.result())
 367 SketchConstraintCoincidence_66.setName("SketchConstraintCoincidence_75")
 368 SketchConstraintCoincidence_67 = Sketch_6.setCoincident(SketchLine_47.startPoint(), SketchLine_42.result())
 369 SketchConstraintCoincidence_67.setName("SketchConstraintCoincidence_76")
 370 SketchLine_48 = Sketch_6.addLine(20, 30.00000000000001, 19.99999999999999, 60)
 371 SketchLine_48.setName("SketchLine_47")
 372 SketchLine_48.result().setName("SketchLine_47")
 373 SketchLine_48.setAuxiliary(True)
 374 SketchConstraintCoincidence_68 = Sketch_6.setCoincident(SketchLine_44.startPoint(), SketchLine_48.startPoint())
 375 SketchConstraintCoincidence_68.setName("SketchConstraintCoincidence_79")
 376 SketchConstraintCoincidence_69 = Sketch_6.setCoincident(SketchLine_46.endPoint(), SketchLine_38.endPoint())
 377 SketchConstraintCoincidence_69.setName("SketchConstraintCoincidence_80")
 378 SketchConstraintCoincidence_70 = Sketch_6.setCoincident(SketchLine_48.endPoint(), SketchLine_44.result())
 379 SketchConstraintCoincidence_70.setName("SketchConstraintCoincidence_81")
 380 SketchConstraintCoincidence_71 = Sketch_6.setCoincident(SketchLine_38.startPoint(), SketchLine_46.result())
 381 SketchConstraintCoincidence_71.setName("SketchConstraintCoincidence_82")
 382 SketchLine_49 = Sketch_6.addLine(-19.99999999999998, 30.00000000000001, 20, 30)
 383 SketchLine_49.setAuxiliary(True)
 384 SketchConstraintCoincidence_72 = Sketch_6.setCoincident(SketchLine_43.startPoint(), SketchLine_49.startPoint())
 385 SketchConstraintCoincidence_72.setName("SketchConstraintCoincidence_85")
 386 SketchConstraintCoincidence_73 = Sketch_6.setCoincident(SketchLine_48.endPoint(), SketchLine_41.endPoint())
 387 SketchConstraintCoincidence_73.setName("SketchConstraintCoincidence_86")
 388 SketchConstraintCoincidence_74 = Sketch_6.setCoincident(SketchLine_49.endPoint(), SketchLine_43.result())
 389 SketchConstraintCoincidence_74.setName("SketchConstraintCoincidence_87")
 390 SketchConstraintCoincidence_75 = Sketch_6.setCoincident(SketchLine_41.startPoint(), SketchLine_48.result())
 391 SketchConstraintCoincidence_75.setName("SketchConstraintCoincidence_88")
 392 SketchConstraintCoincidence_76 = Sketch_6.setCoincident(SketchLine_47.startPoint(), SketchLine_40.startPoint())
 393 SketchConstraintCoincidence_76.setName("SketchConstraintCoincidence_91")
 394 SketchConstraintCoincidence_77 = Sketch_6.setCoincident(SketchLine_49.endPoint(), SketchLine_39.endPoint())
 395 SketchConstraintCoincidence_77.setName("SketchConstraintCoincidence_92")
 396 SketchConstraintCoincidence_78 = Sketch_6.setCoincident(SketchLine_40.endPoint(), SketchLine_47.result())
 397 SketchConstraintCoincidence_78.setName("SketchConstraintCoincidence_93")
 398 SketchConstraintCoincidence_79 = Sketch_6.setCoincident(SketchLine_39.startPoint(), SketchLine_49.result())
 399 SketchConstraintCoincidence_79.setName("SketchConstraintCoincidence_94")
 400 SketchPoint_3 = Sketch_6.addPoint(model.selection("VERTEX", "Sketch_5/Vertex-SketchLine_30s-SketchLine_31s-SketchLine_38e"))
 401 SketchConstraintDistance_16 = Sketch_6.setDistance(SketchLine_40.result(), SketchPoint_3.coordinates(), 20)
 402 SketchConstraintDistance_16.setName("SketchConstraintDistance_18")
 403 SketchConstraintDistance_17 = Sketch_6.setDistance(SketchPoint_3.coordinates(), SketchLine_41.result(), 20)
 404 SketchConstraintDistance_17.setName("SketchConstraintDistance_19")
 405 SketchConstraintDistance_18 = Sketch_6.setDistance(SketchLine_39.result(), SketchPoint_3.coordinates(), 30)
 406 SketchConstraintDistance_18.setName("SketchConstraintDistance_20")
 407 SketchConstraintDistance_19 = Sketch_6.setDistance(SketchLine_39.result(), SketchLine_38.endPoint(), 30)
 408 SketchConstraintDistance_19.setName("SketchConstraintDistance_21")
 409 SketchConstraintCoincidence_80 = Sketch_6.setCoincident(SketchLine_40.startPoint(), SketchLine_38.endPoint())
 410 SketchConstraintCoincidence_80.setName("SketchConstraintCoincidence_152")
 411 SketchConstraintCoincidence_81 = Sketch_6.setCoincident(SketchLine_38.startPoint(), SketchLine_41.endPoint())
 412 SketchConstraintCoincidence_81.setName("SketchConstraintCoincidence_153")
 413 SketchConstraintCoincidence_82 = Sketch_6.setCoincident(SketchLine_40.endPoint(), SketchLine_39.startPoint())
 414 SketchConstraintCoincidence_82.setName("SketchConstraintCoincidence_154")
 415 SketchConstraintCoincidence_84 = Sketch_6.setCoincident(SketchLine_41.startPoint(), SketchLine_39.endPoint())
 416 SketchConstraintCoincidence_84.setName("SketchConstraintCoincidence_156")
 417 model.do()
 418 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), 100, 0, [model.selection("SOLID", "RevolutionFuse_3_1")])
 419 ExtrusionCut_1.result().setName("ExtrusionCut_1_1")
 420 Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOZ"))
 421 SketchLine_50 = Sketch_7.addLine(65, 23.09999999999939, 65, 23.00000523211526)
 422 SketchLine_50.setName("SketchLine_61")
 423 SketchLine_50.result().setName("SketchLine_61")
 424 SketchLine_51 = Sketch_7.addLine(model.selection("EDGE", "Sketch_5/Edge-SketchLine_35"))
 425 SketchLine_51.setName("SketchLine_54")
 426 SketchLine_51.result().setName("SketchLine_54")
 427 SketchLine_52 = Sketch_7.addLine(65, 23.09999999999939, 65, 20)
 428 SketchLine_52.setName("SketchLine_53")
 429 SketchLine_52.result().setName("SketchLine_53")
 430 SketchLine_52.setAuxiliary(True)
 431 SketchConstraintCoincidence_85 = Sketch_7.setCoincident(SketchLine_52.startPoint(), SketchLine_51.result())
 432 SketchConstraintCoincidence_85.setName("SketchConstraintCoincidence_95")
 433 SketchLine_53 = Sketch_7.addLine(68.00001763534438, 19.99999999999997, 68.09999999999999, 20)
 434 SketchLine_53.setName("SketchLine_62")
 435 SketchLine_53.result().setName("SketchLine_62")
 436 SketchLine_54 = Sketch_7.addLine(65, 20, 68.09999999999999, 20)
 437 SketchLine_54.setName("SketchLine_55")
 438 SketchLine_54.result().setName("SketchLine_55")
 439 SketchLine_54.setAuxiliary(True)
 440 SketchConstraintCoincidence_86 = Sketch_7.setCoincident(SketchLine_52.endPoint(), SketchLine_54.startPoint())
 441 SketchConstraintCoincidence_86.setName("SketchConstraintCoincidence_96")
 442 SketchLine_55 = Sketch_7.addLine(model.selection("EDGE", "RevolutionFuse_3_1/Modfied_13&RevolutionFuse_3_1/Modfied_10"))
 443 SketchLine_55.setName("SketchLine_56")
 444 SketchLine_55.result().setName("SketchLine_56")
 445 SketchConstraintCoincidence_87 = Sketch_7.setCoincident(SketchLine_54.endPoint(), SketchLine_55.result())
 446 SketchConstraintCoincidence_87.setName("SketchConstraintCoincidence_97")
 447 SketchLine_56 = Sketch_7.addLine(68.09999999999999, 20, 68.09999999999999, 18.51336352164785)
 448 SketchLine_56.setName("SketchLine_57")
 449 SketchLine_56.result().setName("SketchLine_57")
 450 SketchConstraintCoincidence_88 = Sketch_7.setCoincident(SketchLine_54.endPoint(), SketchLine_56.startPoint())
 451 SketchConstraintCoincidence_88.setName("SketchConstraintCoincidence_98")
 452 SketchLine_57 = Sketch_7.addLine(68.09999999999999, 18.51336352164785, 63.35445204813018, 18.51336352164785)
 453 SketchLine_57.setName("SketchLine_58")
 454 SketchLine_57.result().setName("SketchLine_58")
 455 SketchConstraintCoincidence_89 = Sketch_7.setCoincident(SketchLine_56.endPoint(), SketchLine_57.startPoint())
 456 SketchConstraintCoincidence_89.setName("SketchConstraintCoincidence_99")
 457 SketchLine_58 = Sketch_7.addLine(63.35445204813018, 18.51336352164785, 63.35445204813018, 23.09999999999939)
 458 SketchLine_58.setName("SketchLine_59")
 459 SketchLine_58.result().setName("SketchLine_59")
 460 SketchConstraintCoincidence_90 = Sketch_7.setCoincident(SketchLine_57.endPoint(), SketchLine_58.startPoint())
 461 SketchConstraintCoincidence_90.setName("SketchConstraintCoincidence_100")
 462 SketchLine_59 = Sketch_7.addLine(63.35445204813018, 23.09999999999939, 65, 23.09999999999939)
 463 SketchLine_59.setName("SketchLine_60")
 464 SketchLine_59.result().setName("SketchLine_60")
 465 SketchConstraintCoincidence_91 = Sketch_7.setCoincident(SketchLine_58.endPoint(), SketchLine_59.startPoint())
 466 SketchConstraintCoincidence_91.setName("SketchConstraintCoincidence_101")
 467 SketchConstraintCoincidence_92 = Sketch_7.setCoincident(SketchLine_52.startPoint(), SketchLine_59.endPoint())
 468 SketchConstraintCoincidence_92.setName("SketchConstraintCoincidence_102")
 469 SketchConstraintVertical_12 = Sketch_7.setVertical(SketchLine_52.result())
 470 SketchConstraintHorizontal_14 = Sketch_7.setHorizontal(SketchLine_54.result())
 471 SketchConstraintHorizontal_15 = Sketch_7.setHorizontal(SketchLine_57.result())
 472 SketchConstraintHorizontal_16 = Sketch_7.setHorizontal(SketchLine_59.result())
 473 SketchConstraintVertical_13 = Sketch_7.setVertical(SketchLine_56.result())
 474 SketchConstraintVertical_14 = Sketch_7.setVertical(SketchLine_58.result())
 475 SketchArc_7 = Sketch_7.addArc(68, 22.99999999999999, 65, 23.00000523211526, 68.00001763534438, 19.99999999999997, False)
 476 SketchArc_7.setName("SketchArc_12")
 477 SketchArc_7.result().setName("SketchArc_12")
 478 SketchArc_7.results()[1].setName("SketchArc_12_2")
 479 SketchConstraintCoincidence_93 = Sketch_7.setCoincident(SketchArc_7.startPoint(), SketchLine_50.endPoint())
 480 SketchConstraintCoincidence_93.setName("SketchConstraintCoincidence_103")
 481 SketchConstraintCoincidence_94 = Sketch_7.setCoincident(SketchArc_7.endPoint(), SketchLine_53.startPoint())
 482 SketchConstraintCoincidence_94.setName("SketchConstraintCoincidence_104")
 483 SketchConstraintTangent_12 = Sketch_7.setTangent(SketchArc_7.results()[1], SketchLine_50.result())
 484 SketchConstraintTangent_12.setName("SketchConstraintTangent_21")
 485 SketchConstraintTangent_13 = Sketch_7.setTangent(SketchArc_7.results()[1], SketchLine_53.result())
 486 SketchConstraintTangent_13.setName("SketchConstraintTangent_22")
 487 SketchConstraintCoincidence_95 = Sketch_7.setCoincident(SketchLine_52.startPoint(), SketchLine_50.startPoint())
 488 SketchConstraintCoincidence_95.setName("SketchConstraintCoincidence_105")
 489 SketchConstraintCoincidence_96 = Sketch_7.setCoincident(SketchLine_54.endPoint(), SketchLine_53.endPoint())
 490 SketchConstraintCoincidence_96.setName("SketchConstraintCoincidence_106")
 491 SketchConstraintCoincidence_97 = Sketch_7.setCoincident(SketchLine_50.endPoint(), SketchLine_52.result())
 492 SketchConstraintCoincidence_97.setName("SketchConstraintCoincidence_107")
 493 SketchConstraintCoincidence_98 = Sketch_7.setCoincident(SketchLine_53.startPoint(), SketchLine_54.result())
 494 SketchConstraintCoincidence_98.setName("SketchConstraintCoincidence_108")
 495 SketchConstraintRadius_7 = Sketch_7.setRadius(SketchArc_7.results()[1], 3)
 496 SketchConstraintRadius_7.setName("SketchConstraintRadius_12")
 497 SketchConstraintDistance_20 = Sketch_7.setDistance(SketchLine_53.endPoint(), SketchLine_50.result(), 3.1)
 498 SketchConstraintDistance_20.setName("SketchConstraintDistance_22")
 499 SketchConstraintDistance_21 = Sketch_7.setDistance(SketchLine_50.startPoint(), SketchLine_53.result(), 3.1)
 500 SketchConstraintDistance_21.setName("SketchConstraintDistance_23")
 501 model.do()
 502 RevolutionFuse_4 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_7")], model.selection("EDGE", "PartSet/OZ"), 14.4, 14.4, [model.selection("SOLID", "ExtrusionCut_1_1")])
 503 RevolutionFuse_4.result().setName("RevolutionFuse_4_1")
 504 Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOZ"))
 505 SketchCircle_1 = Sketch_8.addCircle(0, 45, 12.5)
 506 SketchLine_60 = Sketch_8.addLine(model.selection("EDGE", "Sketch_5/Edge-SketchLine_30"))
 507 SketchLine_60.setName("SketchLine_63")
 508 SketchLine_60.result().setName("SketchLine_63")
 509 SketchConstraintCoincidence_99 = Sketch_8.setCoincident(SketchCircle_1.center(), SketchLine_60.result())
 510 SketchConstraintCoincidence_99.setName("SketchConstraintCoincidence_109")
 511 SketchLine_61 = Sketch_8.addLine(model.selection("EDGE", "Sketch_5/Edge-SketchLine_38"))
 512 SketchLine_61.setName("SketchLine_64")
 513 SketchLine_61.result().setName("SketchLine_64")
 514 SketchConstraintDistance_22 = Sketch_8.setDistance(SketchCircle_1.center(), SketchLine_61.result(), 45)
 515 SketchConstraintDistance_22.setName("SketchConstraintDistance_24")
 516 SketchConstraintRadius_8 = Sketch_8.setRadius(SketchCircle_1.results()[1], 12.5)
 517 SketchConstraintRadius_8.setName("SketchConstraintRadius_13")
 518 model.do()
 519 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchCircle_1_2f")], model.selection(), 100, 100, [model.selection("SOLID", "RevolutionFuse_4_1")])
 520 ExtrusionCut_2.result().setName("ExtrusionCut_2_1")
 521 Sketch_9 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
 522 SketchLine_62 = Sketch_9.addLine(0, 84, 0, -2)
 523 SketchLine_62.setName("SketchLine_65")
 524 SketchLine_62.result().setName("SketchLine_65")
 525 SketchLine_63 = Sketch_9.addLine(model.selection("EDGE", "PartSet/OZ"))
 526 SketchLine_63.setName("SketchLine_66")
 527 SketchLine_63.result().setName("SketchLine_66")
 528 SketchConstraintCoincidence_100 = Sketch_9.setCoincident(SketchLine_62.startPoint(), SketchLine_63.result())
 529 SketchConstraintCoincidence_100.setName("SketchConstraintCoincidence_110")
 530 SketchConstraintCoincidence_101 = Sketch_9.setCoincident(SketchLine_62.endPoint(), SketchLine_63.result())
 531 SketchConstraintCoincidence_101.setName("SketchConstraintCoincidence_111")
 532 SketchLine_64 = Sketch_9.addLine(50, 8, 50, 63.99999981522573)
 533 SketchLine_64.setName("SketchLine_91")
 534 SketchLine_64.result().setName("SketchLine_91")
 535 SketchLine_65 = Sketch_9.addLine(0, -2, 58, -2)
 536 SketchLine_65.setName("SketchLine_67")
 537 SketchLine_65.result().setName("SketchLine_67")
 538 SketchConstraintCoincidence_102 = Sketch_9.setCoincident(SketchLine_62.endPoint(), SketchLine_65.startPoint())
 539 SketchConstraintCoincidence_102.setName("SketchConstraintCoincidence_112")
 540 SketchLine_66 = Sketch_9.addLine(44.0000002728486, 70, 15, 70)
 541 SketchLine_66.setName("SketchLine_92")
 542 SketchLine_66.result().setName("SketchLine_92")
 543 SketchLine_67 = Sketch_9.addLine(58, -2, 58.00000000000001, 3.999997221073)
 544 SketchLine_67.setName("SketchLine_93")
 545 SketchLine_67.result().setName("SketchLine_93")
 546 SketchLine_68 = Sketch_9.addLine(58, -2, 58, 8)
 547 SketchLine_68.setAuxiliary(True)
 548 SketchConstraintCoincidence_103 = Sketch_9.setCoincident(SketchLine_65.endPoint(), SketchLine_68.startPoint())
 549 SketchConstraintCoincidence_103.setName("SketchConstraintCoincidence_113")
 550 SketchLine_69 = Sketch_9.addLine(53.99999482393354, 8, 50, 8)
 551 SketchLine_69.setName("SketchLine_94")
 552 SketchLine_69.result().setName("SketchLine_94")
 553 SketchLine_70 = Sketch_9.addLine(58, 8, 50, 8)
 554 SketchLine_70.setName("SketchLine_69")
 555 SketchLine_70.result().setName("SketchLine_69")
 556 SketchLine_70.setAuxiliary(True)
 557 SketchConstraintCoincidence_104 = Sketch_9.setCoincident(SketchLine_68.endPoint(), SketchLine_70.startPoint())
 558 SketchConstraintCoincidence_104.setName("SketchConstraintCoincidence_114")
 559 SketchLine_71 = Sketch_9.addLine(50, 8, 49.99999999999999, 70)
 560 SketchLine_71.setName("SketchLine_70")
 561 SketchLine_71.result().setName("SketchLine_70")
 562 SketchLine_71.setAuxiliary(True)
 563 SketchConstraintCoincidence_105 = Sketch_9.setCoincident(SketchLine_70.endPoint(), SketchLine_71.startPoint())
 564 SketchConstraintCoincidence_105.setName("SketchConstraintCoincidence_115")
 565 SketchLine_72 = Sketch_9.addLine(49.99999999999999, 70, 15, 70)
 566 SketchLine_72.setName("SketchLine_71")
 567 SketchLine_72.result().setName("SketchLine_71")
 568 SketchLine_72.setAuxiliary(True)
 569 SketchConstraintCoincidence_106 = Sketch_9.setCoincident(SketchLine_71.endPoint(), SketchLine_72.startPoint())
 570 SketchConstraintCoincidence_106.setName("SketchConstraintCoincidence_116")
 571 SketchLine_73 = Sketch_9.addLine(15, 70, 15, 84)
 572 SketchLine_73.setName("SketchLine_72")
 573 SketchLine_73.result().setName("SketchLine_72")
 574 SketchConstraintCoincidence_107 = Sketch_9.setCoincident(SketchLine_72.endPoint(), SketchLine_73.startPoint())
 575 SketchConstraintCoincidence_107.setName("SketchConstraintCoincidence_117")
 576 SketchLine_74 = Sketch_9.addLine(15, 84, 0, 84)
 577 SketchLine_74.setName("SketchLine_73")
 578 SketchLine_74.result().setName("SketchLine_73")
 579 SketchConstraintCoincidence_108 = Sketch_9.setCoincident(SketchLine_73.endPoint(), SketchLine_74.startPoint())
 580 SketchConstraintCoincidence_108.setName("SketchConstraintCoincidence_118")
 581 SketchConstraintCoincidence_109 = Sketch_9.setCoincident(SketchLine_62.startPoint(), SketchLine_74.endPoint())
 582 SketchConstraintCoincidence_109.setName("SketchConstraintCoincidence_119")
 583 SketchLine_75 = Sketch_9.addLine(model.selection("EDGE", "PartSet/OX"))
 584 SketchLine_75.setName("SketchLine_74")
 585 SketchLine_75.result().setName("SketchLine_74")
 586 SketchConstraintDistance_23 = Sketch_9.setDistance(SketchLine_65.endPoint(), SketchLine_75.result(), 2)
 587 SketchConstraintDistance_23.setName("SketchConstraintDistance_25")
 588 SketchConstraintDistance_24 = Sketch_9.setDistance(SketchLine_65.endPoint(), SketchLine_63.result(), 58)
 589 SketchConstraintDistance_24.setName("SketchConstraintDistance_26")
 590 SketchConstraintHorizontal_17 = Sketch_9.setHorizontal(SketchLine_65.result())
 591 SketchConstraintVertical_15 = Sketch_9.setVertical(SketchLine_71.result())
 592 SketchConstraintVertical_16 = Sketch_9.setVertical(SketchLine_73.result())
 593 SketchConstraintVertical_17 = Sketch_9.setVertical(SketchLine_68.result())
 594 SketchConstraintHorizontal_18 = Sketch_9.setHorizontal(SketchLine_74.result())
 595 SketchConstraintHorizontal_19 = Sketch_9.setHorizontal(SketchLine_72.result())
 596 SketchConstraintHorizontal_20 = Sketch_9.setHorizontal(SketchLine_70.result())
 597 SketchConstraintDistance_25 = Sketch_9.setDistance(SketchLine_70.endPoint(), SketchLine_62.result(), 50)
 598 SketchConstraintDistance_25.setName("SketchConstraintDistance_27")
 599 SketchConstraintDistance_26 = Sketch_9.setDistance(SketchLine_71.endPoint(), SketchLine_75.result(), 70)
 600 SketchConstraintDistance_26.setName("SketchConstraintDistance_28")
 601 SketchConstraintDistance_27 = Sketch_9.setDistance(SketchLine_72.endPoint(), SketchLine_63.result(), 15)
 602 SketchConstraintDistance_27.setName("SketchConstraintDistance_29")
 603 SketchLine_76 = Sketch_9.addLine(model.selection("EDGE", "Sketch_5/Edge-SketchLine_32"))
 604 SketchLine_76.setName("SketchLine_75")
 605 SketchLine_76.result().setName("SketchLine_75")
 606 SketchConstraintDistance_28 = Sketch_9.setDistance(SketchLine_62.startPoint(), SketchLine_76.result(), 2)
 607 SketchConstraintDistance_28.setName("SketchConstraintDistance_30")
 608 SketchConstraintDistance_29 = Sketch_9.setDistance(SketchLine_71.startPoint(), SketchLine_75.result(), 8)
 609 SketchConstraintDistance_29.setName("SketchConstraintDistance_31")
 610 SketchArc_8 = Sketch_9.addArc(44.00000000000001, 64.00000000000001, 50, 63.99999981522573, 44.0000002728486, 70, False)
 611 SketchArc_8.setName("SketchArc_22")
 612 SketchArc_8.result().setName("SketchArc_22")
 613 SketchArc_8.results()[1].setName("SketchArc_22_2")
 614 SketchConstraintCoincidence_110 = Sketch_9.setCoincident(SketchArc_8.startPoint(), SketchLine_64.endPoint())
 615 SketchConstraintCoincidence_110.setName("SketchConstraintCoincidence_140")
 616 SketchConstraintCoincidence_111 = Sketch_9.setCoincident(SketchArc_8.endPoint(), SketchLine_66.startPoint())
 617 SketchConstraintCoincidence_111.setName("SketchConstraintCoincidence_141")
 618 SketchConstraintTangent_14 = Sketch_9.setTangent(SketchArc_8.results()[1], SketchLine_64.result())
 619 SketchConstraintTangent_14.setName("SketchConstraintTangent_26")
 620 SketchConstraintTangent_15 = Sketch_9.setTangent(SketchArc_8.results()[1], SketchLine_66.result())
 621 SketchConstraintTangent_15.setName("SketchConstraintTangent_27")
 622 SketchConstraintCoincidence_112 = Sketch_9.setCoincident(SketchLine_71.startPoint(), SketchLine_64.startPoint())
 623 SketchConstraintCoincidence_112.setName("SketchConstraintCoincidence_142")
 624 SketchConstraintCoincidence_113 = Sketch_9.setCoincident(SketchLine_72.endPoint(), SketchLine_66.endPoint())
 625 SketchConstraintCoincidence_113.setName("SketchConstraintCoincidence_143")
 626 SketchConstraintCoincidence_114 = Sketch_9.setCoincident(SketchLine_64.endPoint(), SketchLine_71.result())
 627 SketchConstraintCoincidence_114.setName("SketchConstraintCoincidence_144")
 628 SketchConstraintCoincidence_115 = Sketch_9.setCoincident(SketchLine_66.startPoint(), SketchLine_72.result())
 629 SketchConstraintCoincidence_115.setName("SketchConstraintCoincidence_145")
 630 SketchArc_9 = Sketch_9.addArc(54, 4, 58.00000000000001, 3.999997221073, 53.99999482393354, 8, False)
 631 SketchArc_9.setName("SketchArc_23")
 632 SketchArc_9.result().setName("SketchArc_23")
 633 SketchArc_9.results()[1].setName("SketchArc_23_2")
 634 SketchConstraintCoincidence_116 = Sketch_9.setCoincident(SketchArc_9.startPoint(), SketchLine_67.endPoint())
 635 SketchConstraintCoincidence_116.setName("SketchConstraintCoincidence_146")
 636 SketchConstraintCoincidence_117 = Sketch_9.setCoincident(SketchArc_9.endPoint(), SketchLine_69.startPoint())
 637 SketchConstraintCoincidence_117.setName("SketchConstraintCoincidence_147")
 638 SketchConstraintTangent_16 = Sketch_9.setTangent(SketchArc_9.results()[1], SketchLine_67.result())
 639 SketchConstraintTangent_16.setName("SketchConstraintTangent_28")
 640 SketchConstraintTangent_17 = Sketch_9.setTangent(SketchArc_9.results()[1], SketchLine_69.result())
 641 SketchConstraintTangent_17.setName("SketchConstraintTangent_29")
 642 SketchConstraintCoincidence_118 = Sketch_9.setCoincident(SketchLine_68.startPoint(), SketchLine_67.startPoint())
 643 SketchConstraintCoincidence_118.setName("SketchConstraintCoincidence_148")
 644 SketchConstraintCoincidence_119 = Sketch_9.setCoincident(SketchLine_70.endPoint(), SketchLine_69.endPoint())
 645 SketchConstraintCoincidence_119.setName("SketchConstraintCoincidence_149")
 646 SketchConstraintCoincidence_120 = Sketch_9.setCoincident(SketchLine_67.endPoint(), SketchLine_68.result())
 647 SketchConstraintCoincidence_120.setName("SketchConstraintCoincidence_150")
 648 SketchConstraintCoincidence_121 = Sketch_9.setCoincident(SketchLine_69.startPoint(), SketchLine_70.result())
 649 SketchConstraintCoincidence_121.setName("SketchConstraintCoincidence_151")
 650 SketchConstraintRadius_9 = Sketch_9.setRadius(SketchArc_8.results()[1], 6)
 651 SketchConstraintRadius_9.setName("SketchConstraintRadius_16")
 652 SketchConstraintRadius_10 = Sketch_9.setRadius(SketchArc_9.results()[1], 4)
 653 SketchConstraintRadius_10.setName("SketchConstraintRadius_17")
 654 model.do()
 655 Sketch_10 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOY"))
 656 SketchLine_77 = Sketch_10.addLine(64, 20, 89, 20)
 657 SketchLine_77.setName("SketchLine_76")
 658 SketchLine_77.result().setName("SketchLine_76")
 659 SketchPoint_4 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_2_1/Modfied_11&RevolutionFuse_2_1/Modfied_15&RevolutionFuse_3_1/Modfied_15&RevolutionFuse_3_1/Modfied_4"))
 660 SketchConstraintCoincidence_122 = Sketch_10.setCoincident(SketchLine_77.startPoint(), SketchPoint_4.result())
 661 SketchConstraintCoincidence_122.setName("SketchConstraintCoincidence_120")
 662 SketchPoint_5 = Sketch_10.addPoint(model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_1s-SketchLine_8e-SketchLine_4e"))
 663 SketchConstraintCoincidence_123 = Sketch_10.setCoincident(SketchLine_77.endPoint(), SketchPoint_5.result())
 664 SketchConstraintCoincidence_123.setName("SketchConstraintCoincidence_121")
 665 SketchLine_78 = Sketch_10.addLine(64, -20, 89, -20)
 666 SketchLine_78.setName("SketchLine_77")
 667 SketchLine_78.result().setName("SketchLine_77")
 668 SketchPoint_6 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_1_1/Modfied_4&RevolutionFuse_1_1/Modfied_10&RevolutionFuse_3_1/Modfied_17&RevolutionFuse_3_1/Modfied_8"))
 669 SketchConstraintCoincidence_124 = Sketch_10.setCoincident(SketchLine_78.startPoint(), SketchPoint_6.result())
 670 SketchConstraintCoincidence_124.setName("SketchConstraintCoincidence_122")
 671 SketchPoint_7 = Sketch_10.addPoint(model.selection("VERTEX", "ExtrusionFuse_2_1/Modfied_3&RevolutionFuse_1_1/Modfied_4&ExtrusionFuse_2_1/Modfied_4&RevolutionFuse_3_1/Modfied_17"))
 672 SketchConstraintCoincidence_125 = Sketch_10.setCoincident(SketchLine_78.endPoint(), SketchPoint_7.result())
 673 SketchConstraintCoincidence_125.setName("SketchConstraintCoincidence_123")
 674 SketchArc_10 = Sketch_10.addArc(89.00000104846708, 1.669244441022778e-015, 89, -20, 89, 20, False)
 675 SketchArc_10.setName("SketchArc_13")
 676 SketchArc_10.result().setName("SketchArc_13")
 677 SketchArc_10.results()[1].setName("SketchArc_13_2")
 678 SketchConstraintCoincidence_126 = Sketch_10.setCoincident(SketchArc_10.startPoint(), SketchLine_78.endPoint())
 679 SketchConstraintCoincidence_126.setName("SketchConstraintCoincidence_124")
 680 SketchConstraintTangent_18 = Sketch_10.setTangent(SketchArc_10.results()[1], SketchLine_78.result())
 681 SketchConstraintTangent_18.setName("SketchConstraintTangent_23")
 682 SketchConstraintCoincidence_127 = Sketch_10.setCoincident(SketchLine_77.endPoint(), SketchArc_10.endPoint())
 683 SketchConstraintCoincidence_127.setName("SketchConstraintCoincidence_125")
 684 SketchConstraintCoincidence_128 = Sketch_10.setCoincident(SketchPoint_5.coordinates(), SketchArc_10.endPoint())
 685 SketchConstraintCoincidence_128.setName("SketchConstraintCoincidence_126")
 686 SketchArc_11 = Sketch_10.addArc(63.9999997725999, -23.01134810362887, 64, -20, 61.15622559702544, -22.02080994708719, False)
 687 SketchArc_11.setName("SketchArc_14")
 688 SketchArc_11.result().setName("SketchArc_14")
 689 SketchArc_11.results()[1].setName("SketchArc_14_2")
 690 SketchConstraintCoincidence_129 = Sketch_10.setCoincident(SketchArc_11.startPoint(), SketchLine_78.startPoint())
 691 SketchConstraintCoincidence_129.setName("SketchConstraintCoincidence_127")
 692 SketchConstraintTangent_19 = Sketch_10.setTangent(SketchArc_11.results()[1], SketchLine_78.result())
 693 SketchConstraintTangent_19.setName("SketchConstraintTangent_24")
 694 SketchPoint_8 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_3_1/Modfied_9&RevolutionFuse_3_1/Modfied_8&ExtrusionCut_2_1/Modfied_5&RevolutionFuse_3_1/Modfied_7&RevolutionFuse_3_1/Modfied_24"))
 695 SketchConstraintCoincidence_130 = Sketch_10.setCoincident(SketchArc_11.endPoint(), SketchPoint_8.result())
 696 SketchConstraintCoincidence_130.setName("SketchConstraintCoincidence_128")
 697 SketchArc_12 = Sketch_10.addArc(64.00001789135865, 23.01137360115889, 64, 20, 61.15622559702543, 22.02080994708722, True)
 698 SketchArc_12.setName("SketchArc_15")
 699 SketchArc_12.result().setName("SketchArc_15")
 700 SketchArc_12.results()[1].setName("SketchArc_15_2")
 701 SketchConstraintCoincidence_131 = Sketch_10.setCoincident(SketchArc_12.startPoint(), SketchLine_77.startPoint())
 702 SketchConstraintCoincidence_131.setName("SketchConstraintCoincidence_129")
 703 SketchConstraintTangent_20 = Sketch_10.setTangent(SketchArc_12.results()[1], SketchLine_77.result())
 704 SketchConstraintTangent_20.setName("SketchConstraintTangent_25")
 705 SketchPoint_9 = Sketch_10.addPoint(model.selection("VERTEX", "RevolutionFuse_3_1/Modfied_5&RevolutionFuse_3_1/Modfied_4&ExtrusionCut_2_1/Modfied_5&RevolutionFuse_3_1/Modfied_3&RevolutionFuse_3_1/Modfied_24"))
 706 SketchConstraintCoincidence_132 = Sketch_10.setCoincident(SketchArc_12.endPoint(), SketchPoint_9.result())
 707 SketchConstraintCoincidence_132.setName("SketchConstraintCoincidence_130")
 708 SketchLine_79 = Sketch_10.addLine(61.15622559702543, 22.02080994708722, 59.81204392543111, 22.0208099470871)
 709 SketchLine_79.setName("SketchLine_78")
 710 SketchLine_79.result().setName("SketchLine_78")
 711 SketchConstraintCoincidence_133 = Sketch_10.setCoincident(SketchArc_12.endPoint(), SketchLine_79.startPoint())
 712 SketchConstraintCoincidence_133.setName("SketchConstraintCoincidence_131")
 713 SketchConstraintCoincidence_134 = Sketch_10.setCoincident(SketchPoint_9.coordinates(), SketchLine_79.startPoint())
 714 SketchConstraintCoincidence_134.setName("SketchConstraintCoincidence_132")
 715 SketchLine_80 = Sketch_10.addLine(59.81204392543111, 22.0208099470871, 59.81204392543111, -22.02080994708712)
 716 SketchLine_80.setName("SketchLine_79")
 717 SketchLine_80.result().setName("SketchLine_79")
 718 SketchConstraintCoincidence_135 = Sketch_10.setCoincident(SketchLine_79.endPoint(), SketchLine_80.startPoint())
 719 SketchConstraintCoincidence_135.setName("SketchConstraintCoincidence_133")
 720 SketchLine_81 = Sketch_10.addLine(61.15622559702544, -22.02080994708719, 59.81204392543111, -22.02080994708712)
 721 SketchLine_81.setName("SketchLine_80")
 722 SketchLine_81.result().setName("SketchLine_80")
 723 SketchConstraintCoincidence_136 = Sketch_10.setCoincident(SketchArc_11.endPoint(), SketchLine_81.startPoint())
 724 SketchConstraintCoincidence_136.setName("SketchConstraintCoincidence_134")
 725 SketchConstraintCoincidence_137 = Sketch_10.setCoincident(SketchPoint_8.coordinates(), SketchLine_81.startPoint())
 726 SketchConstraintCoincidence_137.setName("SketchConstraintCoincidence_135")
 727 SketchConstraintCoincidence_138 = Sketch_10.setCoincident(SketchLine_80.endPoint(), SketchLine_81.endPoint())
 728 SketchConstraintCoincidence_138.setName("SketchConstraintCoincidence_136")
 729 SketchConstraintParallel_3 = Sketch_10.setParallel(SketchLine_78.result(), SketchLine_81.result())
 730 SketchConstraintParallel_4 = Sketch_10.setParallel(SketchLine_77.result(), SketchLine_79.result())
 731 SketchConstraintPerpendicular_1 = Sketch_10.setPerpendicular(SketchLine_80.result(), SketchLine_77.result())
 732 SketchPoint_10 = Sketch_10.addPoint(model.selection("VERTEX", "Sketch_6/Vertex-SketchPoint_3"))
 733 SketchMultiRotation_1_objects = [SketchArc_10.results()[1], SketchLine_77.result(), SketchLine_78.result(), SketchArc_12.results()[1], SketchLine_79.result(), SketchLine_80.result(), SketchLine_81.result(), SketchArc_11.results()[1]]
 734 SketchMultiRotation_1 = Sketch_10.addRotation(SketchMultiRotation_1_objects, SketchPoint_10.coordinates(), 120, 3)
 735 [SketchArc_13, SketchArc_14, SketchLine_82, SketchLine_83, SketchLine_84, SketchLine_85, SketchArc_15, SketchArc_16, SketchLine_86, SketchLine_87, SketchLine_88, SketchLine_89, SketchLine_90, SketchLine_91, SketchArc_17, SketchArc_18] = SketchMultiRotation_1.rotated()
 736 SketchArc_18.setName("SketchArc_21")
 737 SketchArc_18.result().setName("SketchArc_21")
 738 SketchArc_18.results()[1].setName("SketchArc_21_2")
 739 SketchArc_17.setName("SketchArc_18")
 740 SketchArc_17.result().setName("SketchArc_18")
 741 SketchArc_17.results()[1].setName("SketchArc_18_2")
 742 SketchLine_91.setName("SketchLine_90")
 743 SketchLine_91.result().setName("SketchLine_90")
 744 SketchLine_90.setName("SketchLine_85")
 745 SketchLine_90.result().setName("SketchLine_85")
 746 SketchLine_88.setName("SketchLine_84")
 747 SketchLine_88.result().setName("SketchLine_84")
 748 SketchLine_87.setName("SketchLine_88")
 749 SketchLine_87.result().setName("SketchLine_88")
 750 SketchLine_86.setName("SketchLine_83")
 751 SketchLine_86.result().setName("SketchLine_83")
 752 SketchArc_16.setName("SketchArc_20")
 753 SketchArc_16.result().setName("SketchArc_20")
 754 SketchArc_16.results()[1].setName("SketchArc_20_2")
 755 SketchArc_15.setName("SketchArc_17")
 756 SketchArc_15.result().setName("SketchArc_17")
 757 SketchArc_15.results()[1].setName("SketchArc_17_2")
 758 SketchLine_85.setName("SketchLine_87")
 759 SketchLine_85.result().setName("SketchLine_87")
 760 SketchLine_84.setName("SketchLine_82")
 761 SketchLine_84.result().setName("SketchLine_82")
 762 SketchLine_83.setName("SketchLine_86")
 763 SketchLine_83.result().setName("SketchLine_86")
 764 SketchLine_82.setName("SketchLine_81")
 765 SketchLine_82.result().setName("SketchLine_81")
 766 SketchArc_14.setName("SketchArc_19")
 767 SketchArc_14.result().setName("SketchArc_19")
 768 SketchArc_14.results()[1].setName("SketchArc_19_2")
 769 SketchArc_13.setName("SketchArc_16")
 770 SketchArc_13.result().setName("SketchArc_16")
 771 SketchArc_13.results()[1].setName("SketchArc_16_2")
 772 model.do()
 773 ExtrusionFuse_3 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_10/Face-SketchArc_16_2f-SketchLine_81r-SketchLine_82f-SketchArc_17_2r-SketchLine_83f-SketchLine_84f-SketchLine_85r-SketchArc_18_2r"), model.selection("FACE", "Sketch_10/Face-SketchArc_19_2f-SketchLine_86r-SketchLine_87f-SketchArc_20_2r-SketchLine_88f-SketchLine_89f-SketchLine_90r-SketchArc_21_2r")], model.selection(), 20, 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
 774 ExtrusionFuse_3.result().setName("ExtrusionFuse_3_1")
 775 Sketch_11 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOY"))
 776 SketchCircle_2 = Sketch_11.addCircle(89, 0, 6)
 777 SketchPoint_11 = Sketch_11.addPoint(model.selection("VERTEX", "Sketch_2/Vertex-SketchPoint_1-SketchLine_10s-SketchLine_9e"))
 778 SketchConstraintCoincidence_139 = Sketch_11.setCoincident(SketchCircle_2.center(), SketchPoint_11.result())
 779 SketchConstraintCoincidence_139.setName("SketchConstraintCoincidence_137")
 780 SketchConstraintRadius_11 = Sketch_11.setRadius(SketchCircle_2.results()[1], 6)
 781 SketchConstraintRadius_11.setName("SketchConstraintRadius_14")
 782 SketchCircle_3 = Sketch_11.addCircle(89, 0, 12)
 783 SketchConstraintCoincidence_140 = Sketch_11.setCoincident(SketchCircle_2.center(), SketchCircle_3.center())
 784 SketchConstraintCoincidence_140.setName("SketchConstraintCoincidence_138")
 785 SketchConstraintCoincidence_141 = Sketch_11.setCoincident(SketchPoint_11.coordinates(), SketchCircle_3.center())
 786 SketchConstraintCoincidence_141.setName("SketchConstraintCoincidence_139")
 787 SketchConstraintRadius_12 = Sketch_11.setRadius(SketchCircle_3.results()[1], 12)
 788 SketchConstraintRadius_12.setName("SketchConstraintRadius_15")
 789 SketchPoint_12 = Sketch_11.addPoint(model.selection("VERTEX", "PartSet/Origin"))
 790 SketchMultiRotation_2 = Sketch_11.addRotation([SketchCircle_3.results()[1], SketchCircle_2.results()[1]], SketchPoint_12.coordinates(), 120, 3)
 791 [SketchCircle_4, SketchCircle_5, SketchCircle_6, SketchCircle_7] = SketchMultiRotation_2.rotated()
 792 model.do()
 793 RevolutionCut_1 = model.addRevolutionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_9")], model.selection("EDGE", "PartSet/OZ"), 0, 360, [model.selection("SOLID", "ExtrusionFuse_3_1")])
 794 RevolutionCut_1.result().setName("RevolutionCut_1_1")
 795 ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_11/Wire-SketchCircle_4_2f"), model.selection("WIRE", "Sketch_11/Wire-SketchCircle_3_2f"), model.selection("WIRE", "Sketch_11/Wire-SketchCircle_5_2f")], model.selection(), 30, -15, [model.selection("SOLID", "RevolutionCut_1_1")])
 796 ExtrusionCut_3.result().setName("ExtrusionCut_3_1")
 797 ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_11/Wire-SketchCircle_2_2f"), model.selection("FACE", "Sketch_11/Face-SketchCircle_6_2f"), model.selection("WIRE", "Sketch_11/Wire-SketchCircle_7_2f")], model.selection(), 30, 2, [model.selection("SOLID", "ExtrusionCut_3_1")])
 798 ExtrusionCut_4.result().setName("ExtrusionCut_4_1")
 799
 800 # Test reexecution after parameter change
 801 Parameter_R.setValue(5)
 802 model.do()
 803 model.testResultsVolumes(ExtrusionCut_4, [502615.944655187719035893678665161])
 804 Parameter_R.setValue(3)
 805 model.end()
 806
 807 from GeomAPI import GeomAPI_Shape
 808
 809 model.testNbResults(ExtrusionCut_4, 1)
 810 model.testNbSubResults(ExtrusionCut_4, [0])
 811 model.testNbSubShapes(ExtrusionCut_4, GeomAPI_Shape.SOLID, [1])
 812 model.testNbSubShapes(ExtrusionCut_4, GeomAPI_Shape.FACE, [81])
 813 model.testNbSubShapes(ExtrusionCut_4, GeomAPI_Shape.EDGE, [406])
 814 model.testNbSubShapes(ExtrusionCut_4, GeomAPI_Shape.VERTEX, [812])
 815 model.testResultsVolumes(ExtrusionCut_4, [502902.431481667619664222002029419])
 816
 817 assert(model.checkPythonDump())