test.models/bracket32.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 from salome.shaper import model
  22
  23 model.begin()
  24 partSet = model.moduleDocument()
  25 Part_1 = model.addPart(partSet)
  26 Part_1_doc = Part_1.document()
  27 model.addParameter(Part_1_doc, "BHD", "8", "Base Hole Diameter")
  28 model.addParameter(Part_1_doc, "BHPD", "14", "Base Hole Plate Diameter")
  29 model.addParameter(Part_1_doc, "BHPS", "2", "Base Hole Plate Thickness")
  30 model.addParameter(Part_1_doc, "BHPFR", "BHPS/4*3", "Base Hole Plate Fillet Radius")
  31 Parameter_BPS = model.addParameter(Part_1_doc, "BPS", "6", "Base Plate Thickness")
  32 model.addParameter(Part_1_doc, "Draft", "100", "Bracket Draft")
  33 model.addParameter(Part_1_doc, "TDI", "14", "Tube Internal Diameter")
  34 model.addParameter(Part_1_doc, "TDE", "TDI+8", "Tube External Diameter")
  35 model.addParameter(Part_1_doc, "TL", "86", "Tube Length")
  36 model.addParameter(Part_1_doc, "Width", "112", "Full Width of Base")
  37 model.addParameter(Part_1_doc, "LegThick", "5")
  38 model.addParameter(Part_1_doc, "BaseLegFillet", "3")
  39 model.addParameter(Part_1_doc, "LegTopFillet", "2")
  40 model.addParameter(Part_1_doc, "BottomCutFillet", "2")
  41 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
  42 SketchLine_1 = Sketch_1.addLine(56, -3.652030108005817e-032, 20.9106603007908, -1.450725046594067e-032)
  43 SketchLine_2 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OY"))
  44 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
  45 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.result())
  46 SketchLine_3 = Sketch_1.addLine(20.9106603007908, -1.450725046594067e-032, 17.67553830650723, 18.34728855042577)
  47 SketchLine_3.setName("SketchLine_33")
  48 SketchLine_3.result().setName("SketchLine_33")
  49 SketchLine_4 = Sketch_1.addLine(20.9106603007908, -1.450725046594067e-032, 17.3841206866215, 20)
  50 SketchLine_4.setName("SketchLine_3")
  51 SketchLine_4.result().setName("SketchLine_3")
  52 SketchLine_4.setAuxiliary(True)
  53 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_4.startPoint())
  54 SketchLine_5 = Sketch_1.addLine(15.70591356041877, 20, 0, 20)
  55 SketchLine_5.setName("SketchLine_32")
  56 SketchLine_5.result().setName("SketchLine_32")
  57 SketchLine_6 = Sketch_1.addLine(17.3841206866215, 20, 0, 20)
  58 SketchLine_6.setName("SketchLine_4")
  59 SketchLine_6.result().setName("SketchLine_4")
  60 SketchLine_6.setAuxiliary(True)
  61 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_6.startPoint())
  62 SketchLine_7 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OZ"))
  63 SketchLine_7.setName("SketchLine_5")
  64 SketchLine_7.result().setName("SketchLine_5")
  65 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.result())
  66 SketchLine_8 = Sketch_1.addLine(11, 85, 24.49270766728805, 8.479052309092824)
  67 SketchLine_8.setName("SketchLine_77")
  68 SketchLine_8.result().setName("SketchLine_77")
  69 SketchLine_9 = Sketch_1.addLine(27.44713044942998, 5.999999999999999, 56, 6)
  70 SketchLine_9.setName("SketchLine_78")
  71 SketchLine_9.result().setName("SketchLine_78")
  72 SketchLine_10 = Sketch_1.addLine(-11, 85, -24.49270712488033, 8.479055385239919)
  73 SketchLine_10.setName("SketchLine_79")
  74 SketchLine_10.result().setName("SketchLine_79")
  75 SketchLine_11 = Sketch_1.addLine(-27.44713039880284, 6, -56, 6)
  76 SketchLine_11.setName("SketchLine_80")
  77 SketchLine_11.result().setName("SketchLine_80")
  78 SketchLine_12 = Sketch_1.addLine(0, 85, 11, 85)
  79 SketchLine_12.setName("SketchLine_7")
  80 SketchLine_12.result().setName("SketchLine_7")
  81 SketchLine_13 = Sketch_1.addLine(11, 85, 24.92983147596873, 6)
  82 SketchLine_13.setName("SketchLine_8")
  83 SketchLine_13.result().setName("SketchLine_8")
  84 SketchLine_13.setAuxiliary(True)
  85 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
  86 SketchConstraintCoincidence_6.setName("SketchConstraintCoincidence_9")
  87 SketchLine_14 = Sketch_1.addLine(24.92983147596873, 6, 56, 6)
  88 SketchLine_14.setName("SketchLine_9")
  89 SketchLine_14.result().setName("SketchLine_9")
  90 SketchLine_14.setAuxiliary(True)
  91 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
  92 SketchConstraintCoincidence_7.setName("SketchConstraintCoincidence_10")
  93 SketchLine_15 = Sketch_1.addLine(56, 6, 56, -3.652030108005817e-032)
  94 SketchLine_15.setName("SketchLine_10")
  95 SketchLine_15.result().setName("SketchLine_10")
  96 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
  97 SketchConstraintCoincidence_8.setName("SketchConstraintCoincidence_11")
  98 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_15.endPoint())
  99 SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_12")
 100 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_6.result())
 101 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_12.result())
 102 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_14.result())
 103 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_15.result())
 104 SketchConstraintAngle_1 = Sketch_1.setAngle(SketchLine_14.result(), SketchLine_13.result(), "Draft")
 105 SketchConstraintParallel_1 = Sketch_1.setParallel(SketchLine_13.result(), SketchLine_4.result())
 106 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_4.endPoint(), SketchLine_13.result(), "LegThick")
 107 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_14.endPoint(), SketchLine_1.result(), 6)
 108 SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_6.endPoint(), SketchLine_1.result(), 20)
 109 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_12.startPoint(), SketchLine_7.result())
 110 SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_13")
 111 SketchConstraintDistance_4 = Sketch_1.setDistance(SketchLine_13.startPoint(), SketchLine_7.result(), "TDE/2")
 112 SketchConstraintDistance_5 = Sketch_1.setDistance(SketchLine_13.startPoint(), SketchLine_1.result(), 85)
 113 SketchConstraintDistance_5.setName("SketchConstraintDistance_11")
 114 SketchConstraintDistance_6 = Sketch_1.setDistance(SketchLine_1.startPoint(), SketchLine_7.result(), "Width/2")
 115 SketchConstraintDistance_6.setName("SketchConstraintDistance_12")
 116 SketchLine_16 = Sketch_1.addLine(11, 85, 24.92983147596873, 6)
 117 SketchLine_16.setName("SketchLine_30")
 118 SketchLine_16.result().setName("SketchLine_30")
 119 SketchLine_16.setAuxiliary(True)
 120 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_13.startPoint(), SketchLine_16.startPoint())
 121 SketchConstraintCoincidence_11.setName("SketchConstraintCoincidence_24")
 122 SketchLine_17 = Sketch_1.addLine(24.92983147596873, 6, 56, 6)
 123 SketchLine_17.setName("SketchLine_31")
 124 SketchLine_17.result().setName("SketchLine_31")
 125 SketchLine_17.setAuxiliary(True)
 126 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_14.endPoint(), SketchLine_17.endPoint())
 127 SketchConstraintCoincidence_12.setName("SketchConstraintCoincidence_25")
 128 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_16.endPoint(), SketchLine_13.result())
 129 SketchConstraintCoincidence_13.setName("SketchConstraintCoincidence_26")
 130 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_17.startPoint(), SketchLine_14.result())
 131 SketchConstraintCoincidence_14.setName("SketchConstraintCoincidence_27")
 132 SketchArc_1 = Sketch_1.addArc(15.70592142426694, 18, 17.67553830650723, 18.34728855042577, 15.70591356041877, 20, False)
 133 SketchArc_1.setName("SketchArc_2")
 134 SketchArc_1.result().setName("SketchArc_2")
 135 SketchArc_1.results()[1].setName("SketchArc_2_2")
 136 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_3.endPoint())
 137 SketchConstraintCoincidence_15.setName("SketchConstraintCoincidence_28")
 138 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_5.startPoint())
 139 SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_29")
 140 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_5.result())
 141 SketchConstraintTangent_1.setName("SketchConstraintTangent_3")
 142 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_3.result())
 143 SketchConstraintTangent_2.setName("SketchConstraintTangent_4")
 144 SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_5.endPoint())
 145 SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_30")
 146 SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_4.startPoint(), SketchLine_3.startPoint())
 147 SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_31")
 148 SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_6.result())
 149 SketchConstraintCoincidence_19.setName("SketchConstraintCoincidence_32")
 150 SketchConstraintCoincidence_20 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.result())
 151 SketchConstraintCoincidence_20.setName("SketchConstraintCoincidence_33")
 152 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "LegTopFillet")
 153 SketchConstraintRadius_1.setName("SketchConstraintRadius_7")
 154 SketchArc_2 = Sketch_1.addArc(-15.70592142426695, 18, -15.70592154309944, 20, -17.67553694121995, 18.34729629335474, False)
 155 SketchArc_2.setName("SketchArc_3")
 156 SketchArc_2.result().setName("SketchArc_3")
 157 SketchArc_2.results()[1].setName("SketchArc_3_2")
 158 SketchLine_18 = Sketch_1.addLine(-20.91066030079081, 0, -17.67553694121995, 18.34729629335474)
 159 SketchLine_18.setName("SketchLine_34")
 160 SketchLine_18.result().setName("SketchLine_34")
 161 SketchLine_19 = Sketch_1.addLine(-56, 0, -20.91066030079081, 0)
 162 SketchLine_19.setName("SketchLine_35")
 163 SketchLine_19.result().setName("SketchLine_35")
 164 SketchLine_20 = Sketch_1.addLine(-56, 6, -56, 0)
 165 SketchLine_20.setName("SketchLine_36")
 166 SketchLine_20.result().setName("SketchLine_36")
 167 SketchLine_21 = Sketch_1.addLine(0, 85, -11, 85)
 168 SketchLine_21.setName("SketchLine_38")
 169 SketchLine_21.result().setName("SketchLine_38")
 170 SketchLine_22 = Sketch_1.addLine(-15.70592154309944, 20, 0, 20)
 171 SketchLine_22.setName("SketchLine_40")
 172 SketchLine_22.result().setName("SketchLine_40")
 173 SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_21.result())
 174 SketchConstraintHorizontal_4.setName("SketchConstraintHorizontal_18")
 175 SketchLine_23 = Sketch_1.addLine(-11, 85, -24.92983147596874, 6)
 176 SketchLine_23.setName("SketchLine_37")
 177 SketchLine_23.result().setName("SketchLine_37")
 178 SketchLine_23.setAuxiliary(True)
 179 SketchConstraintDistance_7 = Sketch_1.setDistance(SketchLine_23.startPoint(), SketchLine_7.result(), "TDE/2")
 180 SketchConstraintDistance_7.setName("SketchConstraintDistance_31")
 181 SketchLine_24 = Sketch_1.addLine(-24.92983147596874, 6, -56, 6)
 182 SketchLine_24.setName("SketchLine_39")
 183 SketchLine_24.result().setName("SketchLine_39")
 184 SketchLine_24.setAuxiliary(True)
 185 SketchConstraintHorizontal_5 = Sketch_1.setHorizontal(SketchLine_24.result())
 186 SketchConstraintHorizontal_5.setName("SketchConstraintHorizontal_19")
 187 SketchConstraintHorizontal_6 = Sketch_1.setHorizontal(SketchLine_19.result())
 188 SketchConstraintHorizontal_6.setName("SketchConstraintHorizontal_20")
 189 SketchConstraintDistance_8 = Sketch_1.setDistance(SketchLine_24.endPoint(), SketchLine_19.result(), "BPS")
 190 SketchConstraintDistance_8.setName("SketchConstraintDistance_32")
 191 SketchConstraintCoincidence_21 = Sketch_1.setCoincident(SketchLine_23.startPoint(), SketchLine_21.endPoint())
 192 SketchConstraintCoincidence_21.setName("SketchConstraintCoincidence_113")
 193 SketchConstraintDistance_9 = Sketch_1.setDistance(SketchLine_20.endPoint(), SketchLine_7.result(), "Width/2")
 194 SketchConstraintDistance_9.setName("SketchConstraintDistance_33")
 195 SketchConstraintCoincidence_22 = Sketch_1.setCoincident(SketchLine_24.endPoint(), SketchLine_20.startPoint())
 196 SketchConstraintCoincidence_22.setName("SketchConstraintCoincidence_114")
 197 SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchLine_20.endPoint(), SketchLine_19.startPoint())
 198 SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_115")
 199 SketchConstraintCoincidence_24 = Sketch_1.setCoincident(SketchLine_19.endPoint(), SketchLine_18.startPoint())
 200 SketchConstraintCoincidence_24.setName("SketchConstraintCoincidence_116")
 201 SketchConstraintCoincidence_25 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_18.endPoint())
 202 SketchConstraintCoincidence_25.setName("SketchConstraintCoincidence_117")
 203 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_20.result())
 204 SketchConstraintVertical_2.setName("SketchConstraintVertical_16")
 205 SketchConstraintParallel_2 = Sketch_1.setParallel(SketchLine_23.result(), SketchLine_18.result())
 206 SketchConstraintCoincidence_26 = Sketch_1.setCoincident(SketchLine_2.result(), SketchLine_19.endPoint())
 207 SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_118")
 208 SketchConstraintCoincidence_27 = Sketch_1.setCoincident(SketchLine_22.startPoint(), SketchArc_2.startPoint())
 209 SketchConstraintCoincidence_27.setName("SketchConstraintCoincidence_119")
 210 SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_2.results()[1], "LegTopFillet")
 211 SketchConstraintRadius_2.setName("SketchConstraintRadius_16")
 212 SketchConstraintHorizontal_7 = Sketch_1.setHorizontal(SketchLine_22.result())
 213 SketchConstraintHorizontal_7.setName("SketchConstraintHorizontal_21")
 214 SketchConstraintCoincidence_28 = Sketch_1.setCoincident(SketchLine_22.endPoint(), SketchLine_5.endPoint())
 215 SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_120")
 216 SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_22.result())
 217 SketchConstraintTangent_3.setName("SketchConstraintTangent_19")
 218 SketchConstraintTangent_4 = Sketch_1.setTangent(SketchLine_18.result(), SketchArc_2.results()[1])
 219 SketchConstraintTangent_4.setName("SketchConstraintTangent_20")
 220 SketchConstraintAngle_2 = Sketch_1.setAngleBackward(SketchLine_19.result(), SketchLine_23.result(), "Draft")
 221 SketchConstraintCoincidence_29 = Sketch_1.setCoincident(SketchLine_17.startPoint(), SketchLine_16.endPoint())
 222 SketchConstraintCoincidence_29.setName("SketchConstraintCoincidence_121")
 223 SketchArc_3 = Sketch_1.addArc(27.44713036950057, 9.000000000000002, 24.49270766728805, 8.479052309092824, 27.44713044942998, 5.999999999999999, False)
 224 SketchArc_3.setName("SketchArc_12")
 225 SketchArc_3.result().setName("SketchArc_12")
 226 SketchArc_3.results()[1].setName("SketchArc_12_2")
 227 SketchConstraintCoincidence_30 = Sketch_1.setCoincident(SketchArc_3.startPoint(), SketchLine_8.endPoint())
 228 SketchConstraintCoincidence_30.setName("SketchConstraintCoincidence_122")
 229 SketchConstraintCoincidence_31 = Sketch_1.setCoincident(SketchArc_3.endPoint(), SketchLine_9.startPoint())
 230 SketchConstraintCoincidence_31.setName("SketchConstraintCoincidence_123")
 231 SketchConstraintTangent_5 = Sketch_1.setTangent(SketchArc_3.results()[1], SketchLine_8.result())
 232 SketchConstraintTangent_5.setName("SketchConstraintTangent_21")
 233 SketchConstraintTangent_6 = Sketch_1.setTangent(SketchArc_3.results()[1], SketchLine_9.result())
 234 SketchConstraintTangent_6.setName("SketchConstraintTangent_22")
 235 SketchConstraintCoincidence_32 = Sketch_1.setCoincident(SketchLine_16.startPoint(), SketchLine_8.startPoint())
 236 SketchConstraintCoincidence_32.setName("SketchConstraintCoincidence_124")
 237 SketchConstraintCoincidence_33 = Sketch_1.setCoincident(SketchLine_17.endPoint(), SketchLine_9.endPoint())
 238 SketchConstraintCoincidence_33.setName("SketchConstraintCoincidence_125")
 239 SketchConstraintCoincidence_34 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_16.result())
 240 SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_126")
 241 SketchConstraintCoincidence_35 = Sketch_1.setCoincident(SketchLine_9.startPoint(), SketchLine_17.result())
 242 SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_127")
 243 SketchConstraintRadius_3 = Sketch_1.setRadius(SketchArc_3.results()[1], "BaseLegFillet")
 244 SketchConstraintRadius_3.setName("SketchConstraintRadius_17")
 245 SketchConstraintCoincidence_36 = Sketch_1.setCoincident(SketchLine_24.startPoint(), SketchLine_23.endPoint())
 246 SketchConstraintCoincidence_36.setName("SketchConstraintCoincidence_128")
 247 SketchArc_4 = Sketch_1.addArc(-27.44713036950059, 9, -27.44713039880284, 6, -24.49270712488033, 8.479055385239919, False)
 248 SketchArc_4.setName("SketchArc_13")
 249 SketchArc_4.result().setName("SketchArc_13")
 250 SketchArc_4.results()[1].setName("SketchArc_13_2")
 251 SketchConstraintCoincidence_37 = Sketch_1.setCoincident(SketchArc_4.startPoint(), SketchLine_11.startPoint())
 252 SketchConstraintCoincidence_37.setName("SketchConstraintCoincidence_129")
 253 SketchConstraintCoincidence_38 = Sketch_1.setCoincident(SketchArc_4.endPoint(), SketchLine_10.endPoint())
 254 SketchConstraintCoincidence_38.setName("SketchConstraintCoincidence_130")
 255 SketchConstraintTangent_7 = Sketch_1.setTangent(SketchArc_4.results()[1], SketchLine_10.result())
 256 SketchConstraintTangent_7.setName("SketchConstraintTangent_23")
 257 SketchConstraintTangent_8 = Sketch_1.setTangent(SketchArc_4.results()[1], SketchLine_11.result())
 258 SketchConstraintTangent_8.setName("SketchConstraintTangent_24")
 259 SketchConstraintCoincidence_39 = Sketch_1.setCoincident(SketchLine_23.startPoint(), SketchLine_10.startPoint())
 260 SketchConstraintCoincidence_39.setName("SketchConstraintCoincidence_131")
 261 SketchConstraintCoincidence_40 = Sketch_1.setCoincident(SketchLine_24.endPoint(), SketchLine_11.endPoint())
 262 SketchConstraintCoincidence_40.setName("SketchConstraintCoincidence_132")
 263 SketchConstraintCoincidence_41 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_23.result())
 264 SketchConstraintCoincidence_41.setName("SketchConstraintCoincidence_133")
 265 SketchConstraintCoincidence_42 = Sketch_1.setCoincident(SketchLine_11.startPoint(), SketchLine_24.result())
 266 SketchConstraintCoincidence_42.setName("SketchConstraintCoincidence_134")
 267 SketchConstraintRadius_4 = Sketch_1.setRadius(SketchArc_4.results()[1], "BaseLegFillet")
 268 SketchConstraintRadius_4.setName("SketchConstraintRadius_18")
 269 SketchConstraintCoincidence_43 = Sketch_1.setCoincident(SketchLine_21.startPoint(), SketchLine_12.startPoint())
 270 SketchConstraintCoincidence_43.setName("SketchConstraintCoincidence_135")
 271 SketchConstraintDistance_10 = Sketch_1.setDistance(SketchArc_4.endPoint(), SketchLine_18.result(), "LegThick")
 272 SketchConstraintDistance_10.setName("SketchConstraintDistance_34")
 273 model.do()
 274 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
 275 SketchLine_25 = Sketch_2.addLine(-20, -5, -20, 37.99999996287101)
 276 SketchLine_25.setName("SketchLine_73")
 277 SketchLine_25.result().setName("SketchLine_73")
 278 SketchLine_26 = Sketch_2.addLine(20, -5, -20, -5)
 279 SketchLine_26.setName("SketchLine_18")
 280 SketchLine_26.result().setName("SketchLine_18")
 281 SketchLine_27 = Sketch_2.addLine(-18.00000018312083, 40, 18.00001539129446, 40)
 282 SketchLine_27.setName("SketchLine_76")
 283 SketchLine_27.result().setName("SketchLine_76")
 284 SketchLine_28 = Sketch_2.addLine(20, 38.00000240162298, 20, -5)
 285 SketchLine_28.setName("SketchLine_75")
 286 SketchLine_28.result().setName("SketchLine_75")
 287 SketchLine_29 = Sketch_2.addLine(20, 40, 20, -5)
 288 SketchLine_29.setName("SketchLine_21")
 289 SketchLine_29.result().setName("SketchLine_21")
 290 SketchLine_29.setAuxiliary(True)
 291 SketchConstraintCoincidence_44 = Sketch_2.setCoincident(SketchLine_29.endPoint(), SketchLine_26.startPoint())
 292 SketchConstraintCoincidence_44.setName("SketchConstraintCoincidence_14")
 293 SketchLine_30 = Sketch_2.addLine(-20, -5, -20, 40)
 294 SketchLine_30.setName("SketchLine_19")
 295 SketchLine_30.result().setName("SketchLine_19")
 296 SketchLine_30.setAuxiliary(True)
 297 SketchConstraintCoincidence_45 = Sketch_2.setCoincident(SketchLine_26.endPoint(), SketchLine_30.startPoint())
 298 SketchConstraintCoincidence_45.setName("SketchConstraintCoincidence_15")
 299 SketchLine_31 = Sketch_2.addLine(-20, 40, 20, 40)
 300 SketchLine_31.setName("SketchLine_20")
 301 SketchLine_31.result().setName("SketchLine_20")
 302 SketchLine_31.setAuxiliary(True)
 303 SketchConstraintCoincidence_46 = Sketch_2.setCoincident(SketchLine_30.endPoint(), SketchLine_31.startPoint())
 304 SketchConstraintCoincidence_46.setName("SketchConstraintCoincidence_16")
 305 SketchConstraintCoincidence_47 = Sketch_2.setCoincident(SketchLine_31.endPoint(), SketchLine_29.startPoint())
 306 SketchConstraintCoincidence_47.setName("SketchConstraintCoincidence_17")
 307 SketchConstraintHorizontal_8 = Sketch_2.setHorizontal(SketchLine_26.result())
 308 SketchConstraintHorizontal_8.setName("SketchConstraintHorizontal_4")
 309 SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_30.result())
 310 SketchConstraintVertical_3.setName("SketchConstraintVertical_2")
 311 SketchConstraintHorizontal_9 = Sketch_2.setHorizontal(SketchLine_31.result())
 312 SketchConstraintHorizontal_9.setName("SketchConstraintHorizontal_5")
 313 SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_29.result())
 314 SketchConstraintVertical_4.setName("SketchConstraintVertical_3")
 315 SketchLine_32 = Sketch_2.addLine(model.selection("EDGE", "PartSet/OZ"))
 316 SketchLine_32.setName("SketchLine_22")
 317 SketchLine_32.result().setName("SketchLine_22")
 318 SketchConstraintDistance_11 = Sketch_2.setDistance(SketchLine_26.startPoint(), SketchLine_32.result(), "(TL/2-3)-20")
 319 SketchConstraintDistance_11.setName("SketchConstraintDistance_5")
 320 SketchConstraintDistance_12 = Sketch_2.setDistance(SketchLine_26.endPoint(), SketchLine_32.result(), "(TL/2-3)-20")
 321 SketchConstraintDistance_12.setName("SketchConstraintDistance_6")
 322 SketchLine_33 = Sketch_2.addLine(model.selection("EDGE", "PartSet/OX"))
 323 SketchLine_33.setName("SketchLine_23")
 324 SketchLine_33.result().setName("SketchLine_23")
 325 SketchConstraintDistance_13 = Sketch_2.setDistance(SketchLine_29.startPoint(), SketchLine_33.result(), 40)
 326 SketchConstraintDistance_13.setName("SketchConstraintDistance_7")
 327 SketchConstraintDistance_14 = Sketch_2.setDistance(SketchLine_26.startPoint(), SketchLine_33.result(), 5)
 328 SketchConstraintDistance_14.setName("SketchConstraintDistance_8")
 329 SketchArc_5 = Sketch_2.addArc(-18, 37.99999999999999, -18.00000018312083, 40, -20, 37.99999996287101, False)
 330 SketchArc_5.setName("SketchArc_10")
 331 SketchArc_5.result().setName("SketchArc_10")
 332 SketchArc_5.results()[1].setName("SketchArc_10_2")
 333 SketchLine_34 = Sketch_2.addLine(-18.00000018312083, 40, 20, 40)
 334 SketchLine_34.setName("SketchLine_74")
 335 SketchLine_34.result().setName("SketchLine_74")
 336 SketchLine_34.setAuxiliary(True)
 337 SketchConstraintCoincidence_48 = Sketch_2.setCoincident(SketchArc_5.startPoint(), SketchLine_34.startPoint())
 338 SketchConstraintCoincidence_48.setName("SketchConstraintCoincidence_101")
 339 SketchConstraintCoincidence_49 = Sketch_2.setCoincident(SketchArc_5.endPoint(), SketchLine_25.endPoint())
 340 SketchConstraintCoincidence_49.setName("SketchConstraintCoincidence_102")
 341 SketchConstraintTangent_9 = Sketch_2.setTangent(SketchArc_5.results()[1], SketchLine_25.result())
 342 SketchConstraintTangent_9.setName("SketchConstraintTangent_15")
 343 SketchConstraintTangent_10 = Sketch_2.setTangent(SketchArc_5.results()[1], SketchLine_34.result())
 344 SketchConstraintTangent_10.setName("SketchConstraintTangent_16")
 345 SketchConstraintCoincidence_50 = Sketch_2.setCoincident(SketchLine_30.startPoint(), SketchLine_25.startPoint())
 346 SketchConstraintCoincidence_50.setName("SketchConstraintCoincidence_103")
 347 SketchConstraintCoincidence_51 = Sketch_2.setCoincident(SketchLine_31.endPoint(), SketchLine_34.endPoint())
 348 SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_104")
 349 SketchConstraintCoincidence_52 = Sketch_2.setCoincident(SketchLine_25.endPoint(), SketchLine_30.result())
 350 SketchConstraintCoincidence_52.setName("SketchConstraintCoincidence_105")
 351 SketchConstraintCoincidence_53 = Sketch_2.setCoincident(SketchLine_34.startPoint(), SketchLine_31.result())
 352 SketchConstraintCoincidence_53.setName("SketchConstraintCoincidence_106")
 353 SketchConstraintRadius_5 = Sketch_2.setRadius(SketchArc_5.results()[1], "BottomCutFillet")
 354 SketchConstraintRadius_5.setName("SketchConstraintRadius_12")
 355 SketchArc_6 = Sketch_2.addArc(18, 38.00000000000001, 20, 38.00000240162298, 18.00001539129446, 40, False)
 356 SketchArc_6.setName("SketchArc_11")
 357 SketchArc_6.result().setName("SketchArc_11")
 358 SketchArc_6.results()[1].setName("SketchArc_11_2")
 359 SketchConstraintCoincidence_54 = Sketch_2.setCoincident(SketchArc_6.startPoint(), SketchLine_28.startPoint())
 360 SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_107")
 361 SketchConstraintCoincidence_55 = Sketch_2.setCoincident(SketchArc_6.endPoint(), SketchLine_27.endPoint())
 362 SketchConstraintCoincidence_55.setName("SketchConstraintCoincidence_108")
 363 SketchConstraintTangent_11 = Sketch_2.setTangent(SketchArc_6.results()[1], SketchLine_28.result())
 364 SketchConstraintTangent_11.setName("SketchConstraintTangent_17")
 365 SketchConstraintTangent_12 = Sketch_2.setTangent(SketchArc_6.results()[1], SketchLine_27.result())
 366 SketchConstraintTangent_12.setName("SketchConstraintTangent_18")
 367 SketchConstraintCoincidence_56 = Sketch_2.setCoincident(SketchLine_29.endPoint(), SketchLine_28.endPoint())
 368 SketchConstraintCoincidence_56.setName("SketchConstraintCoincidence_109")
 369 SketchConstraintCoincidence_57 = Sketch_2.setCoincident(SketchLine_34.startPoint(), SketchLine_27.startPoint())
 370 SketchConstraintCoincidence_57.setName("SketchConstraintCoincidence_110")
 371 SketchConstraintCoincidence_58 = Sketch_2.setCoincident(SketchLine_28.startPoint(), SketchLine_29.result())
 372 SketchConstraintCoincidence_58.setName("SketchConstraintCoincidence_111")
 373 SketchConstraintCoincidence_59 = Sketch_2.setCoincident(SketchLine_27.endPoint(), SketchLine_34.result())
 374 SketchConstraintCoincidence_59.setName("SketchConstraintCoincidence_112")
 375 SketchConstraintRadius_6 = Sketch_2.setRadius(SketchArc_6.results()[1], "BottomCutFillet")
 376 SketchConstraintRadius_6.setName("SketchConstraintRadius_13")
 377 model.do()
 378 Sketch_3 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
 379 SketchCircle_1 = Sketch_3.addCircle(0, 85, 11)
 380 SketchConstraintRadius_7 = Sketch_3.setRadius(SketchCircle_1.results()[1], "TDE/2")
 381 SketchConstraintRadius_7.setName("SketchConstraintRadius_1")
 382 SketchCircle_2 = Sketch_3.addCircle(0, 55, 11)
 383 SketchLine_35 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OZ"))
 384 SketchLine_35.setName("SketchLine_24")
 385 SketchLine_35.result().setName("SketchLine_24")
 386 SketchConstraintCoincidence_60 = Sketch_3.setCoincident(SketchCircle_2.center(), SketchLine_35.result())
 387 SketchConstraintCoincidence_60.setName("SketchConstraintCoincidence_18")
 388 SketchConstraintRadius_8 = Sketch_3.setRadius(SketchCircle_2.results()[1], "TDE/2")
 389 SketchConstraintRadius_8.setName("SketchConstraintRadius_2")
 390 SketchConstraintDistance_15 = Sketch_3.setDistance(SketchCircle_2.center(), SketchCircle_1.center(), 30)
 391 SketchConstraintDistance_15.setName("SketchConstraintDistance_9")
 392 SketchLine_36 = Sketch_3.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"))
 393 SketchLine_36.setName("SketchLine_25")
 394 SketchLine_36.result().setName("SketchLine_25")
 395 SketchConstraintDistance_16 = Sketch_3.setDistance(SketchCircle_1.center(), SketchLine_36.result(), 85)
 396 SketchConstraintDistance_16.setName("SketchConstraintDistance_10")
 397 model.do()
 398 Sketch_4 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
 399 SketchCircle_3 = Sketch_4.addCircle(0, 85, 7)
 400 SketchCircle_4 = Sketch_4.addCircle(0, 55, 7)
 401 SketchPoint_1 = Sketch_4.addPoint(model.selection("VERTEX", "Sketch_3/Vertex-SketchCircle_1"))
 402 SketchConstraintCoincidence_61 = Sketch_4.setCoincident(SketchPoint_1.coordinates(), SketchCircle_3.center())
 403 SketchConstraintCoincidence_61.setName("SketchConstraintCoincidence_19")
 404 SketchPoint_2 = Sketch_4.addPoint(model.selection("VERTEX", "Sketch_3/Vertex-SketchCircle_2"))
 405 SketchConstraintCoincidence_62 = Sketch_4.setCoincident(SketchPoint_2.coordinates(), SketchCircle_4.center())
 406 SketchConstraintCoincidence_62.setName("SketchConstraintCoincidence_20")
 407 SketchConstraintRadius_9 = Sketch_4.setRadius(SketchCircle_3.results()[1], "TDI/2")
 408 SketchConstraintRadius_9.setName("SketchConstraintRadius_3")
 409 SketchConstraintRadius_10 = Sketch_4.setRadius(SketchCircle_4.results()[1], "TDI/2")
 410 SketchConstraintRadius_10.setName("SketchConstraintRadius_4")
 411 model.do()
 412 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), "TL/2-3", "TL/2-3")
 413 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), 100, 100, [model.selection("SOLID", "Extrusion_1_1")])
 414 ExtrusionFuse_1 = model.addExtrusionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), "TL/2", "TL/2", [model.selection("SOLID", "ExtrusionCut_1_1")])
 415 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), 60, 60, [model.selection("SOLID", "ExtrusionFuse_1_1")])
 416 Sketch_5 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
 417 SketchCircle_5 = Sketch_5.addCircle(30, -41, 7.5)
 418 SketchLine_37 = Sketch_5.addLine(model.selection("EDGE", "PartSet/OX"))
 419 SketchLine_37.setName("SketchLine_26")
 420 SketchLine_37.result().setName("SketchLine_26")
 421 SketchConstraintDistance_17 = Sketch_5.setDistance(SketchCircle_5.center(), SketchLine_37.result(), 41)
 422 SketchConstraintDistance_17.setName("SketchConstraintDistance_13")
 423 SketchLine_38 = Sketch_5.addLine(model.selection("EDGE", "PartSet/OY"))
 424 SketchLine_38.setName("SketchLine_27")
 425 SketchLine_38.result().setName("SketchLine_27")
 426 SketchConstraintDistance_18 = Sketch_5.setDistance(SketchCircle_5.center(), SketchLine_38.result(), 30)
 427 SketchConstraintDistance_18.setName("SketchConstraintDistance_14")
 428 SketchConstraintRadius_11 = Sketch_5.setRadius(SketchCircle_5.results()[1], 7.5)
 429 SketchConstraintRadius_11.setName("SketchConstraintRadius_5")
 430 SketchConstraintMirror_1 = Sketch_5.addMirror(SketchLine_37.result(), [SketchCircle_5.results()[1]])
 431 SketchConstraintMirror_1.setName("SketchConstraintMirror_2")
 432 [SketchCircle_6] = SketchConstraintMirror_1.mirrored()
 433 SketchConstraintMirror_2 = Sketch_5.addMirror(SketchLine_38.result(), [SketchCircle_5.results()[1], SketchCircle_6.results()[1]])
 434 SketchConstraintMirror_2.setName("SketchConstraintMirror_3")
 435 [SketchCircle_7, SketchCircle_8] = SketchConstraintMirror_2.mirrored()
 436 model.do()
 437 Sketch_6 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
 438 SketchCircle_9 = Sketch_6.addCircle(30, -41, 4)
 439 SketchPoint_3 = Sketch_6.addPoint(model.selection("VERTEX", "Sketch_5/Vertex-SketchCircle_5"))
 440 SketchConstraintCoincidence_63 = Sketch_6.setCoincident(SketchPoint_3.coordinates(), SketchCircle_9.center())
 441 SketchConstraintCoincidence_63.setName("SketchConstraintCoincidence_21")
 442 SketchConstraintRadius_12 = Sketch_6.setRadius(SketchCircle_9.results()[1], "BHD/2")
 443 SketchConstraintRadius_12.setName("SketchConstraintRadius_6")
 444 SketchLine_39 = Sketch_6.addLine(model.selection("EDGE", "PartSet/OX"))
 445 SketchLine_39.setName("SketchLine_28")
 446 SketchLine_39.result().setName("SketchLine_28")
 447 SketchConstraintMirror_3 = Sketch_6.addMirror(SketchLine_39.result(), [SketchCircle_9.results()[1]])
 448 SketchConstraintMirror_3.setName("SketchConstraintMirror_4")
 449 [SketchCircle_10] = SketchConstraintMirror_3.mirrored()
 450 SketchLine_40 = Sketch_6.addLine(model.selection("EDGE", "PartSet/OY"))
 451 SketchLine_40.setName("SketchLine_29")
 452 SketchLine_40.result().setName("SketchLine_29")
 453 SketchConstraintMirror_4 = Sketch_6.addMirror(SketchLine_40.result(), [SketchCircle_9.results()[1], SketchCircle_10.results()[1]])
 454 SketchConstraintMirror_4.setName("SketchConstraintMirror_5")
 455 [SketchCircle_11, SketchCircle_12] = SketchConstraintMirror_4.mirrored()
 456 model.do()
 457 Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/YOZ"), 30, False)
 458 Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
 459 SketchLine_41 = Sketch_7.addLine(-41, 0, -41, 8)
 460 SketchPoint_4 = Sketch_7.addPoint(model.selection("VERTEX", "Sketch_5/Vertex-SketchCircle_5"))
 461 SketchConstraintCoincidence_64 = Sketch_7.setCoincident(SketchLine_41.startPoint(), SketchPoint_4.result())
 462 SketchConstraintCoincidence_64.setName("SketchConstraintCoincidence_34")
 463 SketchLine_42 = Sketch_7.addLine(-41, 8, -34, 8)
 464 SketchConstraintCoincidence_65 = Sketch_7.setCoincident(SketchLine_41.endPoint(), SketchLine_42.startPoint())
 465 SketchConstraintCoincidence_65.setName("SketchConstraintCoincidence_35")
 466 SketchLine_43 = Sketch_7.addLine(-34, 8, -34, 7.499984403541713)
 467 SketchLine_43.setName("SketchLine_47")
 468 SketchLine_43.result().setName("SketchLine_47")
 469 SketchLine_44 = Sketch_7.addLine(-32.50001348840178, 5.999999999999995, -32, 6)
 470 SketchLine_44.setName("SketchLine_48")
 471 SketchLine_44.result().setName("SketchLine_48")
 472 SketchLine_45 = Sketch_7.addLine(-34, 8, -34, 6)
 473 SketchLine_45.setName("SketchLine_43")
 474 SketchLine_45.result().setName("SketchLine_43")
 475 SketchLine_45.setAuxiliary(True)
 476 SketchConstraintCoincidence_66 = Sketch_7.setCoincident(SketchLine_42.endPoint(), SketchLine_45.startPoint())
 477 SketchConstraintCoincidence_66.setName("SketchConstraintCoincidence_36")
 478 SketchLine_46 = Sketch_7.addLine(-34, 6, -32, 6)
 479 SketchLine_46.setName("SketchLine_44")
 480 SketchLine_46.result().setName("SketchLine_44")
 481 SketchLine_46.setAuxiliary(True)
 482 SketchConstraintCoincidence_67 = Sketch_7.setCoincident(SketchLine_45.endPoint(), SketchLine_46.startPoint())
 483 SketchConstraintCoincidence_67.setName("SketchConstraintCoincidence_37")
 484 SketchLine_47 = Sketch_7.addLine(-32, 6, -32, 0)
 485 SketchLine_47.setName("SketchLine_45")
 486 SketchLine_47.result().setName("SketchLine_45")
 487 SketchConstraintCoincidence_68 = Sketch_7.setCoincident(SketchLine_46.endPoint(), SketchLine_47.startPoint())
 488 SketchConstraintCoincidence_68.setName("SketchConstraintCoincidence_38")
 489 SketchLine_48 = Sketch_7.addLine(-32, 0, -41, 0)
 490 SketchLine_48.setName("SketchLine_46")
 491 SketchLine_48.result().setName("SketchLine_46")
 492 SketchConstraintCoincidence_69 = Sketch_7.setCoincident(SketchLine_47.endPoint(), SketchLine_48.startPoint())
 493 SketchConstraintCoincidence_69.setName("SketchConstraintCoincidence_39")
 494 SketchConstraintCoincidence_70 = Sketch_7.setCoincident(SketchLine_41.startPoint(), SketchLine_48.endPoint())
 495 SketchConstraintCoincidence_70.setName("SketchConstraintCoincidence_40")
 496 SketchConstraintCoincidence_71 = Sketch_7.setCoincident(SketchPoint_4.coordinates(), SketchLine_48.endPoint())
 497 SketchConstraintCoincidence_71.setName("SketchConstraintCoincidence_41")
 498 SketchConstraintHorizontal_10 = Sketch_7.setHorizontal(SketchLine_48.result())
 499 SketchConstraintHorizontal_10.setName("SketchConstraintHorizontal_6")
 500 SketchConstraintVertical_5 = Sketch_7.setVertical(SketchLine_41.result())
 501 SketchConstraintVertical_5.setName("SketchConstraintVertical_4")
 502 SketchConstraintVertical_6 = Sketch_7.setVertical(SketchLine_47.result())
 503 SketchConstraintVertical_6.setName("SketchConstraintVertical_5")
 504 SketchConstraintHorizontal_11 = Sketch_7.setHorizontal(SketchLine_46.result())
 505 SketchConstraintHorizontal_11.setName("SketchConstraintHorizontal_7")
 506 SketchConstraintVertical_7 = Sketch_7.setVertical(SketchLine_45.result())
 507 SketchConstraintVertical_7.setName("SketchConstraintVertical_6")
 508 SketchConstraintHorizontal_12 = Sketch_7.setHorizontal(SketchLine_42.result())
 509 SketchConstraintHorizontal_12.setName("SketchConstraintHorizontal_8")
 510 SketchConstraintDistance_19 = Sketch_7.setDistance(SketchLine_41.endPoint(), SketchLine_48.result(), "BPS+BHPS")
 511 SketchConstraintDistance_19.setName("SketchConstraintDistance_15")
 512 SketchConstraintDistance_20 = Sketch_7.setDistance(SketchLine_47.startPoint(), SketchLine_48.result(), "BPS")
 513 SketchConstraintDistance_20.setName("SketchConstraintDistance_16")
 514 SketchConstraintDistance_21 = Sketch_7.setDistance(SketchLine_48.startPoint(), SketchLine_41.result(), "BHPD/2+BHPFR+0.5")
 515 SketchConstraintDistance_21.setName("SketchConstraintDistance_17")
 516 SketchConstraintDistance_22 = Sketch_7.setDistance(SketchLine_42.endPoint(), SketchLine_41.result(), "BHPD/2")
 517 SketchConstraintDistance_22.setName("SketchConstraintDistance_18")
 518 SketchArc_7 = Sketch_7.addArc(-32.50000000000004, 7.499999999999999, -34, 7.499984403541713, -32.50001348840178, 5.999999999999995, False)
 519 SketchArc_7.setName("SketchArc_5")
 520 SketchArc_7.result().setName("SketchArc_5")
 521 SketchArc_7.results()[1].setName("SketchArc_5_2")
 522 SketchConstraintCoincidence_72 = Sketch_7.setCoincident(SketchArc_7.startPoint(), SketchLine_43.endPoint())
 523 SketchConstraintCoincidence_72.setName("SketchConstraintCoincidence_42")
 524 SketchConstraintCoincidence_73 = Sketch_7.setCoincident(SketchArc_7.endPoint(), SketchLine_44.startPoint())
 525 SketchConstraintCoincidence_73.setName("SketchConstraintCoincidence_43")
 526 SketchConstraintTangent_13 = Sketch_7.setTangent(SketchArc_7.results()[1], SketchLine_43.result())
 527 SketchConstraintTangent_13.setName("SketchConstraintTangent_5")
 528 SketchConstraintTangent_14 = Sketch_7.setTangent(SketchArc_7.results()[1], SketchLine_44.result())
 529 SketchConstraintTangent_14.setName("SketchConstraintTangent_6")
 530 SketchConstraintCoincidence_74 = Sketch_7.setCoincident(SketchLine_45.startPoint(), SketchLine_43.startPoint())
 531 SketchConstraintCoincidence_74.setName("SketchConstraintCoincidence_44")
 532 SketchConstraintCoincidence_75 = Sketch_7.setCoincident(SketchLine_46.endPoint(), SketchLine_44.endPoint())
 533 SketchConstraintCoincidence_75.setName("SketchConstraintCoincidence_45")
 534 SketchConstraintCoincidence_76 = Sketch_7.setCoincident(SketchLine_43.endPoint(), SketchLine_45.result())
 535 SketchConstraintCoincidence_76.setName("SketchConstraintCoincidence_46")
 536 SketchConstraintCoincidence_77 = Sketch_7.setCoincident(SketchLine_44.startPoint(), SketchLine_46.result())
 537 SketchConstraintCoincidence_77.setName("SketchConstraintCoincidence_47")
 538 SketchConstraintRadius_13 = Sketch_7.setRadius(SketchArc_7.results()[1], "BHPFR")
 539 SketchConstraintRadius_13.setName("SketchConstraintRadius_8")
 540 model.do()
 541 RevolutionFuse_1 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_7")], model.selection("EDGE", "Sketch_7/Edge-SketchLine_41"), 360, 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
 542 Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
 543 SketchLine_49 = Sketch_8.addLine(32, 6, 32.50001476412091, 6.000000000000001)
 544 SketchLine_49.setName("SketchLine_55")
 545 SketchLine_49.result().setName("SketchLine_55")
 546 SketchLine_50 = Sketch_8.addLine(32, 0, 41, 0)
 547 SketchLine_50.setName("SketchLine_49")
 548 SketchLine_50.result().setName("SketchLine_49")
 549 SketchPoint_5 = Sketch_8.addPoint(model.selection("VERTEX", "Sketch_6/Vertex-SketchCircle_10"))
 550 SketchConstraintCoincidence_78 = Sketch_8.setCoincident(SketchLine_50.endPoint(), SketchPoint_5.result())
 551 SketchConstraintCoincidence_78.setName("SketchConstraintCoincidence_50")
 552 SketchLine_51 = Sketch_8.addLine(41, 0, 41, 8)
 553 SketchLine_51.setName("SketchLine_50")
 554 SketchLine_51.result().setName("SketchLine_50")
 555 SketchLine_52 = Sketch_8.addLine(34, 7.499985233923545, 34, 8)
 556 SketchLine_52.setName("SketchLine_56")
 557 SketchLine_52.result().setName("SketchLine_56")
 558 SketchLine_53 = Sketch_8.addLine(32, 6, 32, 0)
 559 SketchLine_53.setName("SketchLine_52")
 560 SketchLine_53.result().setName("SketchLine_52")
 561 SketchConstraintCoincidence_79 = Sketch_8.setCoincident(SketchLine_53.endPoint(), SketchLine_50.startPoint())
 562 SketchConstraintCoincidence_79.setName("SketchConstraintCoincidence_51")
 563 SketchConstraintCoincidence_80 = Sketch_8.setCoincident(SketchLine_50.endPoint(), SketchLine_51.startPoint())
 564 SketchConstraintCoincidence_80.setName("SketchConstraintCoincidence_52")
 565 SketchLine_54 = Sketch_8.addLine(41, 8, 34, 8)
 566 SketchLine_54.setName("SketchLine_53")
 567 SketchLine_54.result().setName("SketchLine_53")
 568 SketchConstraintCoincidence_81 = Sketch_8.setCoincident(SketchLine_51.endPoint(), SketchLine_54.startPoint())
 569 SketchConstraintCoincidence_81.setName("SketchConstraintCoincidence_53")
 570 SketchConstraintHorizontal_13 = Sketch_8.setHorizontal(SketchLine_50.result())
 571 SketchConstraintHorizontal_13.setName("SketchConstraintHorizontal_9")
 572 SketchConstraintVertical_8 = Sketch_8.setVertical(SketchLine_51.result())
 573 SketchConstraintVertical_8.setName("SketchConstraintVertical_7")
 574 SketchConstraintVertical_9 = Sketch_8.setVertical(SketchLine_53.result())
 575 SketchConstraintVertical_9.setName("SketchConstraintVertical_8")
 576 SketchPoint_6 = Sketch_8.addPoint(32, 6)
 577 SketchConstraintCoincidence_82 = Sketch_8.setCoincident(SketchPoint_6.coordinates(), SketchLine_53.startPoint())
 578 SketchConstraintCoincidence_82.setName("SketchConstraintCoincidence_55")
 579 SketchPoint_7 = Sketch_8.addPoint(34, 8)
 580 SketchConstraintCoincidence_83 = Sketch_8.setCoincident(SketchLine_54.endPoint(), SketchPoint_7.coordinates())
 581 SketchConstraintCoincidence_83.setName("SketchConstraintCoincidence_58")
 582 SketchLine_55 = Sketch_8.addLine(32, 6, 34, 6)
 583 SketchLine_55.setName("SketchLine_51")
 584 SketchLine_55.result().setName("SketchLine_51")
 585 SketchLine_55.setAuxiliary(True)
 586 SketchConstraintCoincidence_84 = Sketch_8.setCoincident(SketchLine_53.startPoint(), SketchLine_55.startPoint())
 587 SketchConstraintCoincidence_84.setName("SketchConstraintCoincidence_54")
 588 SketchConstraintCoincidence_85 = Sketch_8.setCoincident(SketchPoint_6.coordinates(), SketchLine_55.startPoint())
 589 SketchConstraintCoincidence_85.setName("SketchConstraintCoincidence_56")
 590 SketchLine_56 = Sketch_8.addLine(34, 6, 34, 8)
 591 SketchLine_56.setName("SketchLine_54")
 592 SketchLine_56.result().setName("SketchLine_54")
 593 SketchLine_56.setAuxiliary(True)
 594 SketchConstraintCoincidence_86 = Sketch_8.setCoincident(SketchLine_55.endPoint(), SketchLine_56.startPoint())
 595 SketchConstraintCoincidence_86.setName("SketchConstraintCoincidence_57")
 596 SketchConstraintCoincidence_87 = Sketch_8.setCoincident(SketchPoint_7.coordinates(), SketchLine_56.endPoint())
 597 SketchConstraintCoincidence_87.setName("SketchConstraintCoincidence_59")
 598 SketchConstraintCoincidence_88 = Sketch_8.setCoincident(SketchLine_54.endPoint(), SketchLine_56.endPoint())
 599 SketchConstraintCoincidence_88.setName("SketchConstraintCoincidence_60")
 600 SketchConstraintHorizontal_14 = Sketch_8.setHorizontal(SketchLine_55.result())
 601 SketchConstraintHorizontal_14.setName("SketchConstraintHorizontal_10")
 602 SketchConstraintVertical_10 = Sketch_8.setVertical(SketchLine_56.result())
 603 SketchConstraintVertical_10.setName("SketchConstraintVertical_9")
 604 SketchConstraintDistance_23 = Sketch_8.setDistance(SketchPoint_7.coordinates(), SketchLine_50.result(), 8)
 605 SketchConstraintDistance_23.setName("SketchConstraintDistance_19")
 606 SketchConstraintHorizontal_15 = Sketch_8.setHorizontal(SketchLine_54.result())
 607 SketchConstraintHorizontal_15.setName("SketchConstraintHorizontal_11")
 608 SketchConstraintDistance_24 = Sketch_8.setDistance(SketchLine_53.startPoint(), SketchLine_51.result(), 9)
 609 SketchConstraintDistance_24.setName("SketchConstraintDistance_20")
 610 SketchConstraintDistance_25 = Sketch_8.setDistance(SketchPoint_7.coordinates(), SketchLine_51.result(), 7)
 611 SketchConstraintDistance_25.setName("SketchConstraintDistance_21")
 612 SketchConstraintDistance_26 = Sketch_8.setDistance(SketchLine_53.startPoint(), SketchLine_50.result(), 6)
 613 SketchConstraintDistance_26.setName("SketchConstraintDistance_22")
 614 SketchArc_8 = Sketch_8.addArc(32.50000000000001, 7.500000000000025, 32.50001476412091, 6.000000000000001, 34, 7.499985233923545, False)
 615 SketchArc_8.setName("SketchArc_7")
 616 SketchArc_8.result().setName("SketchArc_7")
 617 SketchArc_8.results()[1].setName("SketchArc_7_2")
 618 SketchConstraintCoincidence_89 = Sketch_8.setCoincident(SketchArc_8.startPoint(), SketchLine_49.endPoint())
 619 SketchConstraintCoincidence_89.setName("SketchConstraintCoincidence_61")
 620 SketchConstraintCoincidence_90 = Sketch_8.setCoincident(SketchArc_8.endPoint(), SketchLine_52.startPoint())
 621 SketchConstraintCoincidence_90.setName("SketchConstraintCoincidence_62")
 622 SketchConstraintTangent_15 = Sketch_8.setTangent(SketchArc_8.results()[1], SketchLine_49.result())
 623 SketchConstraintTangent_15.setName("SketchConstraintTangent_9")
 624 SketchConstraintTangent_16 = Sketch_8.setTangent(SketchArc_8.results()[1], SketchLine_52.result())
 625 SketchConstraintTangent_16.setName("SketchConstraintTangent_10")
 626 SketchConstraintCoincidence_91 = Sketch_8.setCoincident(SketchLine_55.startPoint(), SketchLine_49.startPoint())
 627 SketchConstraintCoincidence_91.setName("SketchConstraintCoincidence_63")
 628 SketchConstraintCoincidence_92 = Sketch_8.setCoincident(SketchLine_56.endPoint(), SketchLine_52.endPoint())
 629 SketchConstraintCoincidence_92.setName("SketchConstraintCoincidence_64")
 630 SketchConstraintCoincidence_93 = Sketch_8.setCoincident(SketchLine_49.endPoint(), SketchLine_55.result())
 631 SketchConstraintCoincidence_93.setName("SketchConstraintCoincidence_65")
 632 SketchConstraintCoincidence_94 = Sketch_8.setCoincident(SketchLine_52.startPoint(), SketchLine_56.result())
 633 SketchConstraintCoincidence_94.setName("SketchConstraintCoincidence_66")
 634 SketchConstraintRadius_14 = Sketch_8.setRadius(SketchArc_8.results()[1], 1.5)
 635 SketchConstraintRadius_14.setName("SketchConstraintRadius_9")
 636 model.do()
 637 RevolutionFuse_2 = model.addRevolutionFuse(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_55r-SketchLine_49f-SketchLine_50f-SketchLine_56r-SketchLine_52f-SketchLine_53f-SketchArc_7_2r")], model.selection("EDGE", "Sketch_8/Edge-SketchLine_50"), 360, 0, [model.selection("SOLID", "RevolutionFuse_1_1")])
 638 Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/YOZ"), 30, True)
 639 Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2"))
 640 SketchLine_57 = Sketch_9.addLine(-32.50001494742042, 5.999999999999998, -32, 6)
 641 SketchLine_57.setName("SketchLine_63")
 642 SketchLine_57.result().setName("SketchLine_63")
 643 SketchLine_58 = Sketch_9.addLine(-32, 0, -41, 0)
 644 SketchLine_58.setName("SketchLine_57")
 645 SketchLine_58.result().setName("SketchLine_57")
 646 SketchPoint_8 = Sketch_9.addPoint(model.selection("VERTEX", "Sketch_6/Vertex-SketchCircle_11"))
 647 SketchConstraintCoincidence_95 = Sketch_9.setCoincident(SketchLine_58.endPoint(), SketchPoint_8.result())
 648 SketchConstraintCoincidence_95.setName("SketchConstraintCoincidence_67")
 649 SketchLine_59 = Sketch_9.addLine(-41, 0, -41, 7.999999999999999)
 650 SketchLine_59.setName("SketchLine_58")
 651 SketchLine_59.result().setName("SketchLine_58")
 652 SketchLine_60 = Sketch_9.addLine(-41, 7.999999999999999, -34, 8)
 653 SketchLine_60.setName("SketchLine_59")
 654 SketchLine_60.result().setName("SketchLine_59")
 655 SketchLine_61 = Sketch_9.addLine(-32, 6, -32, 0)
 656 SketchLine_61.setName("SketchLine_60")
 657 SketchLine_61.result().setName("SketchLine_60")
 658 SketchConstraintCoincidence_96 = Sketch_9.setCoincident(SketchLine_61.endPoint(), SketchLine_58.startPoint())
 659 SketchConstraintCoincidence_96.setName("SketchConstraintCoincidence_68")
 660 SketchConstraintCoincidence_97 = Sketch_9.setCoincident(SketchLine_58.endPoint(), SketchLine_59.startPoint())
 661 SketchConstraintCoincidence_97.setName("SketchConstraintCoincidence_69")
 662 SketchConstraintCoincidence_98 = Sketch_9.setCoincident(SketchLine_59.endPoint(), SketchLine_60.startPoint())
 663 SketchConstraintCoincidence_98.setName("SketchConstraintCoincidence_70")
 664 SketchLine_62 = Sketch_9.addLine(-34, 8, -33.99999999999999, 7.499985052178464)
 665 SketchLine_62.setName("SketchLine_64")
 666 SketchLine_62.result().setName("SketchLine_64")
 667 SketchConstraintHorizontal_16 = Sketch_9.setHorizontal(SketchLine_58.result())
 668 SketchConstraintHorizontal_16.setName("SketchConstraintHorizontal_12")
 669 SketchConstraintVertical_11 = Sketch_9.setVertical(SketchLine_59.result())
 670 SketchConstraintVertical_11.setName("SketchConstraintVertical_10")
 671 SketchConstraintHorizontal_17 = Sketch_9.setHorizontal(SketchLine_60.result())
 672 SketchConstraintHorizontal_17.setName("SketchConstraintHorizontal_13")
 673 SketchConstraintVertical_12 = Sketch_9.setVertical(SketchLine_61.result())
 674 SketchConstraintVertical_12.setName("SketchConstraintVertical_11")
 675 SketchPoint_9 = Sketch_9.addPoint(-34, 8)
 676 SketchConstraintCoincidence_99 = Sketch_9.setCoincident(SketchPoint_9.coordinates(), SketchLine_60.endPoint())
 677 SketchConstraintCoincidence_99.setName("SketchConstraintCoincidence_72")
 678 SketchPoint_10 = Sketch_9.addPoint(-32, 6)
 679 SketchConstraintCoincidence_100 = Sketch_9.setCoincident(SketchPoint_10.coordinates(), SketchLine_61.startPoint())
 680 SketchConstraintCoincidence_100.setName("SketchConstraintCoincidence_73")
 681 SketchLine_63 = Sketch_9.addLine(-34, 8, -34, 6)
 682 SketchLine_63.setName("SketchLine_61")
 683 SketchLine_63.result().setName("SketchLine_61")
 684 SketchLine_63.setAuxiliary(True)
 685 SketchConstraintCoincidence_101 = Sketch_9.setCoincident(SketchLine_60.endPoint(), SketchLine_63.startPoint())
 686 SketchConstraintCoincidence_101.setName("SketchConstraintCoincidence_71")
 687 SketchConstraintCoincidence_102 = Sketch_9.setCoincident(SketchPoint_9.coordinates(), SketchLine_63.startPoint())
 688 SketchConstraintCoincidence_102.setName("SketchConstraintCoincidence_74")
 689 SketchLine_64 = Sketch_9.addLine(-34, 6, -32, 6)
 690 SketchLine_64.setName("SketchLine_62")
 691 SketchLine_64.result().setName("SketchLine_62")
 692 SketchLine_64.setAuxiliary(True)
 693 SketchConstraintCoincidence_103 = Sketch_9.setCoincident(SketchLine_63.endPoint(), SketchLine_64.startPoint())
 694 SketchConstraintCoincidence_103.setName("SketchConstraintCoincidence_75")
 695 SketchConstraintCoincidence_104 = Sketch_9.setCoincident(SketchLine_61.startPoint(), SketchLine_64.endPoint())
 696 SketchConstraintCoincidence_104.setName("SketchConstraintCoincidence_76")
 697 SketchConstraintCoincidence_105 = Sketch_9.setCoincident(SketchPoint_10.coordinates(), SketchLine_64.endPoint())
 698 SketchConstraintCoincidence_105.setName("SketchConstraintCoincidence_77")
 699 SketchConstraintHorizontal_18 = Sketch_9.setHorizontal(SketchLine_64.result())
 700 SketchConstraintHorizontal_18.setName("SketchConstraintHorizontal_14")
 701 SketchConstraintVertical_13 = Sketch_9.setVertical(SketchLine_63.result())
 702 SketchConstraintVertical_13.setName("SketchConstraintVertical_12")
 703 SketchConstraintDistance_27 = Sketch_9.setDistance(SketchLine_61.startPoint(), SketchLine_58.result(), 6)
 704 SketchConstraintDistance_27.setName("SketchConstraintDistance_23")
 705 SketchConstraintDistance_28 = Sketch_9.setDistance(SketchLine_60.endPoint(), SketchLine_58.result(), 8)
 706 SketchConstraintDistance_28.setName("SketchConstraintDistance_24")
 707 SketchConstraintDistance_29 = Sketch_9.setDistance(SketchLine_60.endPoint(), SketchLine_59.result(), 7)
 708 SketchConstraintDistance_29.setName("SketchConstraintDistance_25")
 709 SketchConstraintDistance_30 = Sketch_9.setDistance(SketchLine_61.startPoint(), SketchLine_63.result(), 2)
 710 SketchConstraintDistance_30.setName("SketchConstraintDistance_26")
 711 SketchArc_9 = Sketch_9.addArc(-32.49999999999999, 7.499999999999997, -33.99999999999999, 7.499985052178464, -32.50001494742042, 5.999999999999998, False)
 712 SketchArc_9.setName("SketchArc_8")
 713 SketchArc_9.result().setName("SketchArc_8")
 714 SketchArc_9.results()[1].setName("SketchArc_8_2")
 715 SketchConstraintCoincidence_106 = Sketch_9.setCoincident(SketchArc_9.startPoint(), SketchLine_62.endPoint())
 716 SketchConstraintCoincidence_106.setName("SketchConstraintCoincidence_78")
 717 SketchConstraintCoincidence_107 = Sketch_9.setCoincident(SketchArc_9.endPoint(), SketchLine_57.startPoint())
 718 SketchConstraintCoincidence_107.setName("SketchConstraintCoincidence_79")
 719 SketchConstraintTangent_17 = Sketch_9.setTangent(SketchArc_9.results()[1], SketchLine_57.result())
 720 SketchConstraintTangent_17.setName("SketchConstraintTangent_11")
 721 SketchConstraintTangent_18 = Sketch_9.setTangent(SketchArc_9.results()[1], SketchLine_62.result())
 722 SketchConstraintTangent_18.setName("SketchConstraintTangent_12")
 723 SketchConstraintCoincidence_108 = Sketch_9.setCoincident(SketchLine_64.endPoint(), SketchLine_57.endPoint())
 724 SketchConstraintCoincidence_108.setName("SketchConstraintCoincidence_80")
 725 SketchConstraintCoincidence_109 = Sketch_9.setCoincident(SketchLine_63.startPoint(), SketchLine_62.startPoint())
 726 SketchConstraintCoincidence_109.setName("SketchConstraintCoincidence_81")
 727 SketchConstraintCoincidence_110 = Sketch_9.setCoincident(SketchLine_57.startPoint(), SketchLine_64.result())
 728 SketchConstraintCoincidence_110.setName("SketchConstraintCoincidence_82")
 729 SketchConstraintCoincidence_111 = Sketch_9.setCoincident(SketchLine_62.endPoint(), SketchLine_63.result())
 730 SketchConstraintCoincidence_111.setName("SketchConstraintCoincidence_83")
 731 SketchConstraintRadius_15 = Sketch_9.setRadius(SketchArc_9.results()[1], 1.5)
 732 SketchConstraintRadius_15.setName("SketchConstraintRadius_10")
 733 model.do()
 734 Sketch_10 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2"))
 735 SketchLine_65 = Sketch_10.addLine(33.99999999999999, 7.999999999999999, 33.99999999999999, 7.499985050625134)
 736 SketchLine_65.setName("SketchLine_71")
 737 SketchLine_65.result().setName("SketchLine_71")
 738 SketchLine_66 = Sketch_10.addLine(32, 0, 41, 0)
 739 SketchLine_66.setName("SketchLine_65")
 740 SketchLine_66.result().setName("SketchLine_65")
 741 SketchPoint_11 = Sketch_10.addPoint(model.selection("VERTEX", "Sketch_6/Vertex-SketchCircle_12"))
 742 SketchConstraintCoincidence_112 = Sketch_10.setCoincident(SketchLine_66.endPoint(), SketchPoint_11.result())
 743 SketchConstraintCoincidence_112.setName("SketchConstraintCoincidence_84")
 744 SketchLine_67 = Sketch_10.addLine(41, 0, 41, 7.999999999999999)
 745 SketchLine_67.setName("SketchLine_66")
 746 SketchLine_67.result().setName("SketchLine_66")
 747 SketchLine_68 = Sketch_10.addLine(41, 7.999999999999999, 33.99999999999999, 7.999999999999999)
 748 SketchLine_68.setName("SketchLine_67")
 749 SketchLine_68.result().setName("SketchLine_67")
 750 SketchLine_69 = Sketch_10.addLine(32, 6, 32, 0)
 751 SketchLine_69.setName("SketchLine_68")
 752 SketchLine_69.result().setName("SketchLine_68")
 753 SketchConstraintCoincidence_113 = Sketch_10.setCoincident(SketchLine_69.endPoint(), SketchLine_66.startPoint())
 754 SketchConstraintCoincidence_113.setName("SketchConstraintCoincidence_85")
 755 SketchConstraintCoincidence_114 = Sketch_10.setCoincident(SketchLine_66.endPoint(), SketchLine_67.startPoint())
 756 SketchConstraintCoincidence_114.setName("SketchConstraintCoincidence_86")
 757 SketchConstraintCoincidence_115 = Sketch_10.setCoincident(SketchLine_67.endPoint(), SketchLine_68.startPoint())
 758 SketchConstraintCoincidence_115.setName("SketchConstraintCoincidence_87")
 759 SketchLine_70 = Sketch_10.addLine(32.50001494562209, 6.000000000000006, 32, 6)
 760 SketchLine_70.setName("SketchLine_72")
 761 SketchLine_70.result().setName("SketchLine_72")
 762 SketchConstraintHorizontal_19 = Sketch_10.setHorizontal(SketchLine_66.result())
 763 SketchConstraintHorizontal_19.setName("SketchConstraintHorizontal_15")
 764 SketchConstraintVertical_14 = Sketch_10.setVertical(SketchLine_67.result())
 765 SketchConstraintVertical_14.setName("SketchConstraintVertical_13")
 766 SketchConstraintHorizontal_20 = Sketch_10.setHorizontal(SketchLine_68.result())
 767 SketchConstraintHorizontal_20.setName("SketchConstraintHorizontal_16")
 768 SketchConstraintVertical_15 = Sketch_10.setVertical(SketchLine_69.result())
 769 SketchConstraintVertical_15.setName("SketchConstraintVertical_14")
 770 SketchPoint_12 = Sketch_10.addPoint(33.99999999999999, 7.999999999999999)
 771 SketchConstraintCoincidence_116 = Sketch_10.setCoincident(SketchPoint_12.coordinates(), SketchLine_68.endPoint())
 772 SketchConstraintCoincidence_116.setName("SketchConstraintCoincidence_89")
 773 SketchPoint_13 = Sketch_10.addPoint(32, 6)
 774 SketchConstraintCoincidence_117 = Sketch_10.setCoincident(SketchPoint_13.coordinates(), SketchLine_69.startPoint())
 775 SketchConstraintCoincidence_117.setName("SketchConstraintCoincidence_90")
 776 SketchLine_71 = Sketch_10.addLine(33.99999999999999, 7.999999999999999, 34, 6)
 777 SketchLine_71.setName("SketchLine_69")
 778 SketchLine_71.result().setName("SketchLine_69")
 779 SketchLine_71.setAuxiliary(True)
 780 SketchConstraintCoincidence_118 = Sketch_10.setCoincident(SketchLine_68.endPoint(), SketchLine_71.startPoint())
 781 SketchConstraintCoincidence_118.setName("SketchConstraintCoincidence_88")
 782 SketchConstraintCoincidence_119 = Sketch_10.setCoincident(SketchPoint_12.coordinates(), SketchLine_71.startPoint())
 783 SketchConstraintCoincidence_119.setName("SketchConstraintCoincidence_91")
 784 SketchLine_72 = Sketch_10.addLine(34, 6, 32, 6)
 785 SketchLine_72.setName("SketchLine_70")
 786 SketchLine_72.result().setName("SketchLine_70")
 787 SketchLine_72.setAuxiliary(True)
 788 SketchConstraintCoincidence_120 = Sketch_10.setCoincident(SketchLine_71.endPoint(), SketchLine_72.startPoint())
 789 SketchConstraintCoincidence_120.setName("SketchConstraintCoincidence_92")
 790 SketchConstraintCoincidence_121 = Sketch_10.setCoincident(SketchLine_69.startPoint(), SketchLine_72.endPoint())
 791 SketchConstraintCoincidence_121.setName("SketchConstraintCoincidence_93")
 792 SketchConstraintCoincidence_122 = Sketch_10.setCoincident(SketchPoint_13.coordinates(), SketchLine_72.endPoint())
 793 SketchConstraintCoincidence_122.setName("SketchConstraintCoincidence_94")
 794 SketchConstraintHorizontal_21 = Sketch_10.setHorizontal(SketchLine_72.result())
 795 SketchConstraintHorizontal_21.setName("SketchConstraintHorizontal_17")
 796 SketchConstraintVertical_16 = Sketch_10.setVertical(SketchLine_71.result())
 797 SketchConstraintVertical_16.setName("SketchConstraintVertical_15")
 798 SketchConstraintDistance_31 = Sketch_10.setDistance(SketchLine_71.startPoint(), SketchLine_67.result(), 7)
 799 SketchConstraintDistance_31.setName("SketchConstraintDistance_27")
 800 SketchConstraintDistance_32 = Sketch_10.setDistance(SketchLine_69.startPoint(), SketchLine_71.result(), 2)
 801 SketchConstraintDistance_32.setName("SketchConstraintDistance_28")
 802 SketchConstraintDistance_33 = Sketch_10.setDistance(SketchLine_69.startPoint(), SketchLine_66.result(), 6)
 803 SketchConstraintDistance_33.setName("SketchConstraintDistance_29")
 804 SketchConstraintDistance_34 = Sketch_10.setDistance(SketchLine_71.startPoint(), SketchLine_66.result(), 8)
 805 SketchConstraintDistance_34.setName("SketchConstraintDistance_30")
 806 SketchArc_10 = Sketch_10.addArc(32.50000000000002, 7.500000000000033, 32.50001494562209, 6.000000000000006, 33.99999999999999, 7.499985050625134, False)
 807 SketchArc_10.setName("SketchArc_9")
 808 SketchArc_10.result().setName("SketchArc_9")
 809 SketchArc_10.results()[1].setName("SketchArc_9_2")
 810 SketchConstraintCoincidence_123 = Sketch_10.setCoincident(SketchArc_10.startPoint(), SketchLine_70.startPoint())
 811 SketchConstraintCoincidence_123.setName("SketchConstraintCoincidence_95")
 812 SketchConstraintCoincidence_124 = Sketch_10.setCoincident(SketchArc_10.endPoint(), SketchLine_65.endPoint())
 813 SketchConstraintCoincidence_124.setName("SketchConstraintCoincidence_96")
 814 SketchConstraintTangent_19 = Sketch_10.setTangent(SketchArc_10.results()[1], SketchLine_65.result())
 815 SketchConstraintTangent_19.setName("SketchConstraintTangent_13")
 816 SketchConstraintTangent_20 = Sketch_10.setTangent(SketchArc_10.results()[1], SketchLine_70.result())
 817 SketchConstraintTangent_20.setName("SketchConstraintTangent_14")
 818 SketchConstraintCoincidence_125 = Sketch_10.setCoincident(SketchLine_71.startPoint(), SketchLine_65.startPoint())
 819 SketchConstraintCoincidence_125.setName("SketchConstraintCoincidence_97")
 820 SketchConstraintCoincidence_126 = Sketch_10.setCoincident(SketchLine_72.endPoint(), SketchLine_70.endPoint())
 821 SketchConstraintCoincidence_126.setName("SketchConstraintCoincidence_98")
 822 SketchConstraintCoincidence_127 = Sketch_10.setCoincident(SketchLine_65.endPoint(), SketchLine_71.result())
 823 SketchConstraintCoincidence_127.setName("SketchConstraintCoincidence_99")
 824 SketchConstraintCoincidence_128 = Sketch_10.setCoincident(SketchLine_70.startPoint(), SketchLine_72.result())
 825 SketchConstraintCoincidence_128.setName("SketchConstraintCoincidence_100")
 826 SketchConstraintRadius_16 = Sketch_10.setRadius(SketchArc_10.results()[1], 1.5)
 827 SketchConstraintRadius_16.setName("SketchConstraintRadius_11")
 828 model.do()
 829 RevolutionFuse_3 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_9")], model.selection("EDGE", "Sketch_9/Edge-SketchLine_58"), 360, 0, [model.selection("SOLID", "RevolutionFuse_2_1")])
 830 RevolutionFuse_4 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_10")], model.selection("EDGE", "Sketch_10/Edge-SketchLine_66"), 360, 0, [model.selection("SOLID", "RevolutionFuse_3_1")])
 831 ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchCircle_11_2f"), model.selection("FACE", "Sketch_6/Face-SketchCircle_9_2f"), model.selection("WIRE", "Sketch_6/Wire-SketchCircle_10_2f"), model.selection("FACE", "Sketch_6/Face-SketchCircle_12_2f")], model.selection("EDGE", "PartSet/OZ"), "BPS+5", 5, [model.selection("SOLID", "RevolutionFuse_4_1")])
 832
 833 # Test reexecution after parameter change
 834 Parameter_BPS.setValue(3)
 835 model.do()
 836 model.testResultsVolumes(ExtrusionCut_3, [154096.039414040715200826525688171])
 837 Parameter_BPS.setValue(6)
 838 model.end()
 839
 840 from GeomAPI import GeomAPI_Shape
 841
 842 model.testNbResults(ExtrusionCut_3, 1)
 843 model.testNbSubResults(ExtrusionCut_3, [0])
 844 model.testNbSubShapes(ExtrusionCut_3, GeomAPI_Shape.SOLID, [1])
 845 model.testNbSubShapes(ExtrusionCut_3, GeomAPI_Shape.FACE, [70])
 846 model.testNbSubShapes(ExtrusionCut_3, GeomAPI_Shape.EDGE, [326])
 847 model.testNbSubShapes(ExtrusionCut_3, GeomAPI_Shape.VERTEX, [652])
 848 model.testResultsVolumes(ExtrusionCut_3, [156878.517351274640532210469245911])
 849
 850 assert(model.checkPythonDump())