test.models/bearing_puller.py

   1 # Copyright (C) 2014-2019  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from SketchAPI import *
  21
  22 from salome.shaper import model
  23
  24 model.begin()
  25 partSet = model.moduleDocument()
  26 model.addParameter(partSet, "Gap", "10")
  27 model.addParameter(partSet, "Rod", "12")
  28 model.addParameter(partSet, "Thickness", "25")
  29 Part_1 = model.addPart(partSet)
  30 Part_1.setName("Body")
  31 Part_1_doc = Part_1.document()
  32 model.addParameter(Part_1_doc, "Radius", "50", "Radius of the body")
  33 model.addParameter(Part_1_doc, "Width", "25", "Width of body arms")
  34 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
  35 SketchLine_1 = Sketch_1.addLine(50, 14.61148285474187, 50, 0)
  36 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 14.61148285474187)
  37 SketchLine_2 = Sketch_1.addLine(50, 0, 6, 0)
  38 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  39 SketchLine_3 = Sketch_1.addLine(7, 25, 16.13599978860571, 25)
  40 SketchLine_3.setName("SketchLine_4")
  41 SketchLine_3.result().setName("SketchLine_4")
  42 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_3.result())
  43 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_2.result())
  44 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_1.result())
  45 SketchConstraintVertical_1.setName("SketchConstraintVertical_2")
  46 SketchArc_1 = Sketch_1.addArc(16.1359986285606, -59.99999999999999, 16.13599978860571, 25, 46.80399475966571, 19.27467447616896, True)
  47 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_1.startPoint())
  48 SketchConstraintCoincidence_2.setName("SketchConstraintCoincidence_4")
  49 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_3.result())
  50 SketchArc_2 = Sketch_1.addArc(45, 14.61145639129118, 46.80399475966571, 19.27467447616896, 50, 14.61148285474187, True)
  51 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchArc_1.endPoint())
  52 SketchConstraintCoincidence_3.setName("SketchConstraintCoincidence_6")
  53 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_1.startPoint())
  54 SketchConstraintCoincidence_4.setName("SketchConstraintCoincidence_7")
  55 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchArc_2.results()[1])
  56 SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_1.result())
  57 SketchPoint_1 = Sketch_1.addPoint(50, 17.96300027009704)
  58 SketchPoint_1.setAuxiliary(True)
  59 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchPoint_1.coordinates(), SketchLine_1.result())
  60 SketchConstraintCoincidence_5.setName("SketchConstraintCoincidence_8")
  61 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchPoint_1.result(), SketchArc_1.results()[1])
  62 SketchConstraintCoincidence_6.setName("SketchConstraintCoincidence_9")
  63 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_2.results()[1], 5)
  64 SketchPoint_2 = Sketch_1.addPoint(model.selection("VERTEX", "PartSet/Origin"))
  65 SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_1.results()[1], 85)
  66 SketchConstraintRadius_2.setName("SketchConstraintRadius_4")
  67 SketchLine_4 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OZ"))
  68 SketchLine_4.setName("SketchLine_27")
  69 SketchLine_4.result().setName("SketchLine_27")
  70 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_4.result(), SketchLine_2.startPoint(), "Radius")
  71 SketchConstraintDistance_1.setName("SketchConstraintDistance_13")
  72 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_3.startPoint(), SketchLine_2.result(), "Thickness")
  73 SketchConstraintDistance_2.setName("SketchConstraintDistance_14")
  74 SketchLine_5 = Sketch_1.addLine(6, 0, 6, 24)
  75 SketchLine_5.setName("SketchLine_28")
  76 SketchLine_5.result().setName("SketchLine_28")
  77 SketchLine_6 = Sketch_1.addLine(6, 24, 7, 25)
  78 SketchLine_6.setName("SketchLine_29")
  79 SketchLine_6.result().setName("SketchLine_29")
  80 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  81 SketchConstraintCoincidence_7.setName("SketchConstraintCoincidence_32")
  82 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_5.result())
  83 SketchConstraintVertical_2.setName("SketchConstraintVertical_3")
  84 SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_5.startPoint(), SketchLine_4.result(), "Rod/2")
  85 SketchConstraintDistance_3.setName("SketchConstraintDistance_15")
  86 SketchConstraintAngle_1 = Sketch_1.setAngleComplementary(SketchLine_6.result(), SketchLine_5.result(), 45.00000000000006)
  87 SketchConstraintAngle_1.setName("SketchConstraintAngle_3")
  88 SketchConstraintDistance_4 = Sketch_1.setDistance(SketchLine_4.result(), SketchLine_6.endPoint(), "Rod/2 + 1")
  89 SketchConstraintDistance_4.setName("SketchConstraintDistance_16")
  90 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_5.startPoint())
  91 SketchConstraintCoincidence_8.setName("SketchConstraintCoincidence_33")
  92 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_3.startPoint())
  93 SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_34")
  94 SketchLine_7 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OX"))
  95 SketchLine_7.setName("SketchLine_30")
  96 SketchLine_7.result().setName("SketchLine_30")
  97 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_7.result())
  98 SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_35")
  99 model.do()
 100 Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchArc_2_2f-SketchArc_1_2f-SketchLine_4r-SketchLine_29r-SketchLine_28r-SketchLine_2r-SketchLine_1r")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
 101 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_2"))
 102 SketchLine_8 = Sketch_2.addLine(0, 0, 25, 43.30127018922193)
 103 SketchLine_8.setName("SketchLine_5")
 104 SketchLine_8.result().setName("SketchLine_5")
 105 SketchLine_8.setAuxiliary(True)
 106 SketchPoint_3 = Sketch_2.addPoint(model.selection("VERTEX", "PartSet/Origin"))
 107 SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_8.startPoint(), SketchPoint_3.result())
 108 SketchCircle_1 = Sketch_2.addCircle(model.selection("EDGE", "[Revolution_1_1/Generated_Face&Sketch_1/SketchLine_2][Revolution_1_1/Generated_Face&Sketch_1/SketchLine_1]"))
 109 SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchCircle_1.results()[1])
 110 SketchLine_9 = Sketch_2.addLine(39.43375672974064, -43.30127018922192, 15.87711932209923, -2.499977343709401)
 111 SketchLine_9.setName("SketchLine_10")
 112 SketchLine_9.result().setName("SketchLine_10")
 113 SketchLine_10 = Sketch_2.addLine(0, 0, 25, -43.30127018922193)
 114 SketchLine_10.setName("SketchLine_6")
 115 SketchLine_10.result().setName("SketchLine_6")
 116 SketchLine_10.setAuxiliary(True)
 117 SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchLine_10.startPoint(), SketchPoint_3.result())
 118 SketchCircle_2 = Sketch_2.addCircle(model.selection("EDGE", "[Revolution_1_1/Generated_Face&Sketch_1/SketchLine_2][Revolution_1_1/Generated_Face&Sketch_1/SketchLine_1]"))
 119 SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchLine_10.endPoint(), SketchCircle_2.results()[1])
 120 SketchLine_11 = Sketch_2.addLine(15.87713238415337, 2.499999967850816, 39.43375672974065, 43.30127018922192)
 121 SketchLine_11.setName("SketchLine_11")
 122 SketchLine_11.result().setName("SketchLine_11")
 123 SketchLine_12 = Sketch_2.addLine(model.selection("EDGE", "PartSet/OX"))
 124 SketchLine_12.setName("SketchLine_7")
 125 SketchLine_12.result().setName("SketchLine_7")
 126 SketchConstraintAngle_2 = Sketch_2.setAngleBackward(SketchLine_12.result(), SketchLine_10.result(), 59.99999999999994)
 127 SketchConstraintAngle_2.setName("SketchConstraintAngle_1")
 128 SketchConstraintAngle_3 = Sketch_2.setAngle(SketchLine_12.result(), SketchLine_8.result(), 59.99999999999999)
 129 SketchConstraintAngle_3.setName("SketchConstraintAngle_2")
 130 SketchLine_13 = Sketch_2.addLine(14.43375672974065, -4.667176185980158e-016, 39.43375672974065, 43.30127018922192)
 131 SketchLine_13.setName("SketchLine_9")
 132 SketchLine_13.result().setName("SketchLine_9")
 133 SketchLine_13.setAuxiliary(True)
 134 SketchLine_14 = Sketch_2.addLine(39.43375672974064, -43.30127018922192, 14.43375672974065, -4.667176185980158e-016)
 135 SketchLine_14.setName("SketchLine_8")
 136 SketchLine_14.result().setName("SketchLine_8")
 137 SketchLine_14.setAuxiliary(True)
 138 SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_13.startPoint())
 139 SketchConstraintCoincidence_15.setName("SketchConstraintCoincidence_16")
 140 SketchConstraintParallel_1 = Sketch_2.setParallel(SketchLine_14.result(), SketchLine_10.result())
 141 SketchConstraintParallel_2 = Sketch_2.setParallel(SketchLine_13.result(), SketchLine_8.result())
 142 SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_8.result(), SketchLine_14.result())
 143 SketchConstraintEqual_2 = Sketch_2.setEqual(SketchLine_10.result(), SketchLine_13.result())
 144 SketchConstraintDistance_5 = Sketch_2.setDistance(SketchLine_13.startPoint(), SketchLine_10.result(), "Width/2")
 145 SketchConstraintDistance_5.setName("SketchConstraintDistance_4")
 146 SketchArc_3 = Sketch_2.addArc(20.20725942163691, 2.933703812344835e-015, 15.87713238415337, 2.499999967850816, 15.87711932209923, -2.499977343709401, False)
 147 SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchArc_3.startPoint(), SketchLine_11.startPoint())
 148 SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_15")
 149 SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchArc_3.endPoint(), SketchLine_9.endPoint())
 150 SketchConstraintTangent_4 = Sketch_2.setTangent(SketchArc_3.results()[1], SketchLine_9.result())
 151 SketchConstraintTangent_5 = Sketch_2.setTangent(SketchArc_3.results()[1], SketchLine_11.result())
 152 SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_14.startPoint(), SketchLine_9.startPoint())
 153 SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchLine_11.endPoint())
 154 SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchLine_9.endPoint(), SketchLine_14.result())
 155 SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchLine_11.startPoint(), SketchLine_13.result())
 156 SketchConstraintRadius_3 = Sketch_2.setRadius(SketchArc_3.results()[1], 5)
 157 SketchConstraintRadius_3.setName("SketchConstraintRadius_2")
 158 SketchConstraintDistance_6 = Sketch_2.setDistance(SketchLine_13.startPoint(), SketchLine_8.result(), "Width/2")
 159 SketchConstraintDistance_6.setName("SketchConstraintDistance_5")
 160 SketchArc_4 = Sketch_2.addArc(14.43375672974064, -1.454136002932938e-015, 39.43375672974064, -43.30127018922192, 39.43375672974065, 43.30127018922192, False)
 161 SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchLine_9.startPoint(), SketchArc_4.startPoint())
 162 SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchLine_14.startPoint(), SketchArc_4.startPoint())
 163 SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_11.endPoint(), SketchArc_4.endPoint())
 164 SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchLine_13.endPoint(), SketchArc_4.endPoint())
 165 SketchConstraintEqual_3 = Sketch_2.setEqual(SketchArc_4.results()[1], SketchCircle_1.results()[1])
 166 SketchMultiRotation_1_objects = [SketchLine_11.result(), SketchArc_3.results()[1], SketchLine_9.result(), SketchArc_4.results()[1]]
 167 SketchMultiRotation_1 = Sketch_2.addRotation(SketchMultiRotation_1_objects, SketchCircle_2.center(), 120, 3)
 168 [SketchLine_15, SketchLine_16, SketchArc_5, SketchArc_6, SketchLine_17, SketchLine_18, SketchArc_7, SketchArc_8] = SketchMultiRotation_1.rotated()
 169 SketchArc_7.setName("SketchArc_6")
 170 SketchArc_7.result().setName("SketchArc_6")
 171 SketchArc_7.results()[1].setName("SketchArc_6_2")
 172 SketchLine_18.setName("SketchLine_15")
 173 SketchLine_18.result().setName("SketchLine_15")
 174 SketchLine_17.setName("SketchLine_13")
 175 SketchLine_17.result().setName("SketchLine_13")
 176 SketchArc_6.setName("SketchArc_7")
 177 SketchArc_6.result().setName("SketchArc_7")
 178 SketchArc_6.results()[1].setName("SketchArc_7_2")
 179 SketchLine_16.setName("SketchLine_14")
 180 SketchLine_16.result().setName("SketchLine_14")
 181 SketchLine_15.setName("SketchLine_12")
 182 SketchLine_15.result().setName("SketchLine_12")
 183 SketchLine_19 = Sketch_2.addLine(7.828185376255509, -23.55881480274223, 31.38482278389692, -64.36010764825475)
 184 SketchLine_19.setName("SketchLine_16")
 185 SketchLine_19.result().setName("SketchLine_16")
 186 SketchLine_20 = Sketch_2.addLine(31.38482278389692, -64.36010764825475, 40.0450768217413, -59.36010764825475)
 187 SketchLine_20.setName("SketchLine_17")
 188 SketchLine_20.result().setName("SketchLine_17")
 189 SketchConstraintCoincidence_26 = Sketch_2.setCoincident(SketchLine_19.endPoint(), SketchLine_20.startPoint())
 190 SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_28")
 191 SketchLine_21 = Sketch_2.addLine(40.0450768217413, -59.36010764825475, 16.48843941409989, -18.55881480274223)
 192 SketchLine_21.setName("SketchLine_18")
 193 SketchLine_21.result().setName("SketchLine_18")
 194 SketchConstraintCoincidence_27 = Sketch_2.setCoincident(SketchLine_20.endPoint(), SketchLine_21.startPoint())
 195 SketchConstraintCoincidence_27.setName("SketchConstraintCoincidence_29")
 196 SketchConstraintParallel_3 = Sketch_2.setParallel(SketchLine_10.result(), SketchLine_19.result())
 197 SketchConstraintParallel_4 = Sketch_2.setParallel(SketchLine_10.result(), SketchLine_21.result())
 198 SketchConstraintEqual_4 = Sketch_2.setEqual(SketchLine_9.result(), SketchLine_21.result())
 199 SketchConstraintEqual_5 = Sketch_2.setEqual(SketchLine_9.result(), SketchLine_19.result())
 200 SketchConstraintDistance_7 = Sketch_2.setDistance(SketchCircle_1.center(), SketchLine_19.result(), "Gap/2")
 201 SketchConstraintDistance_7.setName("SketchConstraintDistance_6")
 202 SketchConstraintDistance_8 = Sketch_2.setDistance(SketchCircle_1.center(), SketchLine_21.result(), "Gap/2")
 203 SketchConstraintDistance_8.setName("SketchConstraintDistance_7")
 204 SketchArc_9 = Sketch_2.addArc(10.5, -18.18653347947321, 7.828185376255509, -23.55881480274223, 16.48843941409989, -18.55881480274223, True)
 205 SketchConstraintCoincidence_28 = Sketch_2.setCoincident(SketchArc_9.center(), SketchLine_10.result())
 206 SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_27")
 207 SketchConstraintCoincidence_29 = Sketch_2.setCoincident(SketchLine_19.startPoint(), SketchArc_9.startPoint())
 208 SketchConstraintCoincidence_29.setName("SketchConstraintCoincidence_30")
 209 SketchConstraintCoincidence_30 = Sketch_2.setCoincident(SketchArc_9.endPoint(), SketchLine_21.endPoint())
 210 SketchConstraintCoincidence_30.setName("SketchConstraintCoincidence_31")
 211 SketchConstraintRadius_4 = Sketch_2.setRadius(SketchArc_9.results()[1], 6)
 212 SketchConstraintRadius_4.setName("SketchConstraintRadius_3")
 213 SketchMultiRotation_2_objects = [SketchLine_19.result(), SketchLine_20.result(), SketchLine_21.result(), SketchArc_9.results()[1]]
 214 SketchMultiRotation_2 = Sketch_2.addRotation(SketchMultiRotation_2_objects, SketchCircle_1.center(), 120, 3)
 215 [SketchLine_22, SketchLine_23, SketchLine_24, SketchLine_25, SketchLine_26, SketchLine_27, SketchArc_10, SketchArc_11] = SketchMultiRotation_2.rotated()
 216 SketchLine_27.setName("SketchLine_24")
 217 SketchLine_27.result().setName("SketchLine_24")
 218 SketchLine_26.setName("SketchLine_21")
 219 SketchLine_26.result().setName("SketchLine_21")
 220 SketchLine_25.setName("SketchLine_23")
 221 SketchLine_25.result().setName("SketchLine_23")
 222 SketchLine_24.setName("SketchLine_20")
 223 SketchLine_24.result().setName("SketchLine_20")
 224 SketchLine_23.setName("SketchLine_22")
 225 SketchLine_23.result().setName("SketchLine_22")
 226 SketchLine_22.setName("SketchLine_19")
 227 SketchLine_22.result().setName("SketchLine_19")
 228 SketchConstraintDistance_9 = Sketch_2.setDistance(SketchArc_9.center(), SketchPoint_3.coordinates(), 21)
 229 SketchConstraintDistance_9.setName("SketchConstraintDistance_8")
 230 model.do()
 231 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchArc_4_2f-SketchLine_11r-SketchArc_3_2f-SketchLine_10r_wire"), model.selection("WIRE", "Sketch_2/Face-SketchArc_7_2f-SketchLine_15r-SketchArc_8_2f-SketchLine_14r_wire"), model.selection("FACE", "Sketch_2/Face-SketchArc_5_2f-SketchLine_13r-SketchArc_6_2f-SketchLine_12r"), model.selection("FACE", "Sketch_2/Face-SketchLine_19f-SketchLine_20f-SketchLine_21f-SketchArc_10_2f"), model.selection("FACE", "Sketch_2/Face-SketchLine_16f-SketchLine_17f-SketchLine_18f-SketchArc_9_2f"), model.selection("WIRE", "Sketch_2/Face-SketchLine_22f-SketchLine_23f-SketchLine_24f-SketchArc_11_2f_wire")], model.selection(), model.selection(), 10, model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_4"), 10)
 232 Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Revolution_1_1")], [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_4"), model.selection("SOLID", "Extrusion_1_5")])
 233 Cut_2 = model.addCut(Part_1_doc, [model.selection("SOLID", "Cut_1_1")], [model.selection("SOLID", "Extrusion_1_2"), model.selection("SOLID", "Extrusion_1_3"), model.selection("SOLID", "Extrusion_1_6")])
 234 Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Cut_2_1/Modified_Face&Sketch_2/SketchLine_21"), model.selection("FACE", "Cut_2_1/Modified_Face&Sketch_2/SketchLine_19"))
 235 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
 236 SketchCircle_3 = Sketch_3.addCircle(25, -10, 4)
 237 SketchCircle_4 = Sketch_3.addCircle(40, -10, 4)
 238 SketchConstraintRadius_5 = Sketch_3.setRadius(SketchCircle_4.results()[1], 4)
 239 SketchConstraintEqual_6 = Sketch_3.setEqual(SketchCircle_3.results()[1], SketchCircle_4.results()[1])
 240 SketchLine_28 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OZ"))
 241 SketchLine_28.setName("SketchLine_25")
 242 SketchLine_28.result().setName("SketchLine_25")
 243 SketchConstraintDistance_10 = Sketch_3.setDistance(SketchCircle_3.center(), SketchLine_28.result(), 25)
 244 SketchConstraintDistance_10.setName("SketchConstraintDistance_9")
 245 SketchConstraintDistance_11 = Sketch_3.setDistance(SketchCircle_4.center(), SketchLine_28.result(), 40)
 246 SketchConstraintDistance_11.setName("SketchConstraintDistance_10")
 247 SketchProjection_1 = Sketch_3.addProjection(model.selection("EDGE", "Cut_2_1/Generated_Edge&Sketch_2/SketchLine_21&Sketch_1/SketchLine_2"), False)
 248 SketchLine_29 = SketchProjection_1.createdFeature()
 249 SketchLine_29.setName("SketchLine_26")
 250 SketchLine_29.result().setName("SketchLine_26")
 251 SketchConstraintDistance_12 = Sketch_3.setDistance(SketchCircle_4.center(), SketchLine_29.result(), 10)
 252 SketchConstraintDistance_12.setName("SketchConstraintDistance_11")
 253 SketchConstraintDistance_13 = Sketch_3.setDistance(SketchCircle_3.center(), SketchLine_29.result(), 10)
 254 SketchConstraintDistance_13.setName("SketchConstraintDistance_12")
 255 model.do()
 256 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_3_2r"), model.selection("WIRE", "Sketch_3/Face-SketchCircle_4_2f_wire")], model.selection(), model.selection("FACE", "Cut_1_1/Modified_Face&Sketch_2/SketchLine_11"), 5, model.selection("FACE", "Cut_1_1/Modified_Face&Sketch_2/SketchLine_13"), 5)
 257 Cut_3 = model.addCut(Part_1_doc, [model.selection("SOLID", "Cut_2_1")], [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "Extrusion_2_2")])
 258 Recover_1 = model.addRecover(Part_1_doc, Cut_3, [Extrusion_2.results()[1], Extrusion_2.result()])
 259 Rotation_1 = model.addRotation(Part_1_doc, [model.selection("SOLID", "Recover_1_1"), model.selection("SOLID", "Recover_1_2")], model.selection("EDGE", "PartSet/OZ"), 120)
 260 Cut_4 = model.addCut(Part_1_doc, [model.selection("SOLID", "Cut_3_1")], [model.selection("SOLID", "Rotation_1_1"), model.selection("SOLID", "Rotation_1_2")])
 261 Recover_2 = model.addRecover(Part_1_doc, Cut_4, [Rotation_1.results()[1], Rotation_1.result()])
 262 Rotation_2 = model.addRotation(Part_1_doc, [model.selection("SOLID", "Recover_2_1"), model.selection("SOLID", "Recover_2_2")], model.selection("EDGE", "PartSet/OZ"), 120)
 263 Cut_5 = model.addCut(Part_1_doc, [model.selection("SOLID", "Cut_4_1")], [model.selection("SOLID", "Rotation_2_2"), model.selection("SOLID", "Rotation_2_1")])
 264 model.do()
 265 Part_2 = model.addPart(partSet)
 266 Part_2.setName("Arm 1")
 267 Part_2_doc = Part_2.document()
 268 model.addParameter(Part_2_doc, "a", "7.5")
 269 model.addParameter(Part_2_doc, "b", "12.5")
 270 model.addParameter(Part_2_doc, "c", "(a-b)/4")
 271 Sketch_4 = model.addSketch(Part_2_doc, model.defaultPlane("XOY"))
 272 SketchLine_30 = Sketch_4.addLine(-7.563632736215193e-032, -5.762896622594646, 0, 3.75)
 273 SketchLine_30.setAuxiliary(True)
 274 SketchLine_31 = Sketch_4.addLine(0, 3.75, 4.894344934278314, 2.394344934278312)
 275 SketchLine_31.setAuxiliary(True)
 276 SketchConstraintCoincidence_31 = Sketch_4.setCoincident(SketchLine_30.endPoint(), SketchLine_31.startPoint())
 277 SketchLine_32 = Sketch_4.addLine(4.894344934278314, 2.394344934278312, -7.563632736215193e-032, -5.762896622594646)
 278 SketchLine_32.setAuxiliary(True)
 279 SketchConstraintCoincidence_32 = Sketch_4.setCoincident(SketchLine_31.endPoint(), SketchLine_32.startPoint())
 280 SketchConstraintCoincidence_33 = Sketch_4.setCoincident(SketchLine_30.startPoint(), SketchLine_32.endPoint())
 281 SketchConstraintVertical_3 = Sketch_4.setVertical(SketchLine_30.result())
 282 SketchLine_33 = Sketch_4.addLine(0, 3.75, 6.25, 3.75)
 283 SketchLine_33.setAuxiliary(True)
 284 SketchConstraintCoincidence_34 = Sketch_4.setCoincident(SketchLine_30.endPoint(), SketchLine_33.startPoint())
 285 SketchConstraintCoincidence_35 = Sketch_4.setCoincident(SketchLine_31.startPoint(), SketchLine_33.startPoint())
 286 SketchLine_34 = Sketch_4.addLine(6.25, 3.75, 6.25, 0)
 287 SketchLine_34.setAuxiliary(True)
 288 SketchConstraintCoincidence_36 = Sketch_4.setCoincident(SketchLine_33.endPoint(), SketchLine_34.startPoint())
 289 SketchLine_35 = Sketch_4.addLine(6.25, 0, 0, 0)
 290 SketchLine_35.setAuxiliary(True)
 291 SketchConstraintCoincidence_37 = Sketch_4.setCoincident(SketchLine_34.endPoint(), SketchLine_35.startPoint())
 292 SketchConstraintCoincidence_38 = Sketch_4.setCoincident(SketchLine_35.endPoint(), SketchLine_30.result())
 293 SketchConstraintHorizontal_3 = Sketch_4.setHorizontal(SketchLine_35.result())
 294 SketchConstraintHorizontal_4 = Sketch_4.setHorizontal(SketchLine_33.result())
 295 SketchConstraintVertical_4 = Sketch_4.setVertical(SketchLine_34.result())
 296 SketchLine_36 = Sketch_4.addLine(-7.563632736215193e-032, -5.762896622594646, 2.447172467139156, 3.072172467139157)
 297 SketchLine_36.setAuxiliary(True)
 298 SketchConstraintCoincidence_39 = Sketch_4.setCoincident(SketchLine_30.startPoint(), SketchLine_36.startPoint())
 299 SketchConstraintCoincidence_40 = Sketch_4.setCoincident(SketchLine_32.endPoint(), SketchLine_36.startPoint())
 300 SketchConstraintCoincidence_41 = Sketch_4.setCoincident(SketchLine_36.endPoint(), SketchLine_31.result())
 301 SketchConstraintPerpendicular_1 = Sketch_4.setPerpendicular(SketchLine_36.result(), SketchLine_31.result())
 302 SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "PartSet/Origin"))
 303 SketchConstraintCoincidence_42 = Sketch_4.setCoincident(SketchLine_35.endPoint(), SketchPoint_4.coordinates())
 304 SketchConstraintCoincidence_42.setName("SketchConstraintCoincidence_20")
 305 SketchConstraintLength_1 = Sketch_4.setLength(SketchLine_33.result(), "b/2")
 306 SketchConstraintLength_2 = Sketch_4.setLength(SketchLine_34.result(), "a/2")
 307 SketchCircle_5 = Sketch_4.addCircle(1.25, -1.25, 1.25)
 308 SketchCircle_5.setAuxiliary(True)
 309 SketchConstraintRadius_6 = Sketch_4.setRadius(SketchCircle_5.results()[1], "(b-a)/4")
 310 SketchConstraintTangent_6 = Sketch_4.setTangent(SketchCircle_5.results()[1], SketchLine_35.result())
 311 SketchConstraintTangent_7 = Sketch_4.setTangent(SketchCircle_5.results()[1], SketchLine_30.result())
 312 SketchConstraintTangent_8 = Sketch_4.setTangent(SketchCircle_5.results()[1], SketchLine_32.result())
 313 SketchLine_37 = Sketch_4.addLine(4.894344934278314, 2.394344934278312, 6.25, 0)
 314 SketchLine_37.setAuxiliary(True)
 315 SketchConstraintCoincidence_44 = Sketch_4.setCoincident(SketchLine_31.endPoint(), SketchLine_37.startPoint())
 316 SketchConstraintCoincidence_45 = Sketch_4.setCoincident(SketchLine_32.startPoint(), SketchLine_37.startPoint())
 317 SketchConstraintCoincidence_46 = Sketch_4.setCoincident(SketchLine_34.endPoint(), SketchLine_37.endPoint())
 318 SketchConstraintCoincidence_47 = Sketch_4.setCoincident(SketchLine_35.startPoint(), SketchLine_37.endPoint())
 319 SketchLine_38 = Sketch_4.addLine(0, 3.75, 6.25, 0)
 320 SketchLine_38.setName("SketchLine_10")
 321 SketchLine_38.result().setName("SketchLine_10")
 322 SketchLine_38.setAuxiliary(True)
 323 SketchConstraintCoincidence_48 = Sketch_4.setCoincident(SketchLine_30.endPoint(), SketchLine_38.startPoint())
 324 SketchConstraintCoincidence_48.setName("SketchConstraintCoincidence_23")
 325 SketchConstraintCoincidence_49 = Sketch_4.setCoincident(SketchLine_31.startPoint(), SketchLine_38.startPoint())
 326 SketchConstraintCoincidence_49.setName("SketchConstraintCoincidence_24")
 327 SketchConstraintCoincidence_50 = Sketch_4.setCoincident(SketchLine_33.startPoint(), SketchLine_38.startPoint())
 328 SketchConstraintCoincidence_50.setName("SketchConstraintCoincidence_25")
 329 SketchConstraintCoincidence_51 = Sketch_4.setCoincident(SketchLine_34.endPoint(), SketchLine_38.endPoint())
 330 SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_26")
 331 SketchConstraintCoincidence_52 = Sketch_4.setCoincident(SketchLine_35.startPoint(), SketchLine_38.endPoint())
 332 SketchConstraintCoincidence_52.setName("SketchConstraintCoincidence_27")
 333 SketchConstraintCoincidence_53 = Sketch_4.setCoincident(SketchLine_37.endPoint(), SketchLine_38.endPoint())
 334 SketchConstraintCoincidence_53.setName("SketchConstraintCoincidence_28")
 335 SketchConstraintPerpendicular_2 = Sketch_4.setPerpendicular(SketchLine_32.result(), SketchLine_38.result())
 336 SketchConstraintPerpendicular_2.setName("SketchConstraintPerpendicular_3")
 337 SketchLine_39 = Sketch_4.addLine(model.selection("EDGE", "PartSet/OY"))
 338 SketchLine_39.setName("SketchLine_11")
 339 SketchLine_39.result().setName("SketchLine_11")
 340 SketchLine_40 = Sketch_4.addLine(model.selection("EDGE", "PartSet/OX"))
 341 SketchLine_40.setName("SketchLine_12")
 342 SketchLine_40.result().setName("SketchLine_12")
 343 SketchArc_12 = Sketch_4.addArc(-7.563632736215193e-032, -5.762896622594646, 0, 3.75, 4.894344934278314, 2.394344934278312, True)
 344 SketchConstraintCoincidence_54 = Sketch_4.setCoincident(SketchLine_30.endPoint(), SketchArc_12.startPoint())
 345 SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_30")
 346 SketchConstraintCoincidence_55 = Sketch_4.setCoincident(SketchLine_31.startPoint(), SketchArc_12.startPoint())
 347 SketchConstraintCoincidence_55.setName("SketchConstraintCoincidence_31")
 348 SketchConstraintCoincidence_56 = Sketch_4.setCoincident(SketchLine_33.startPoint(), SketchArc_12.startPoint())
 349 SketchConstraintCoincidence_56.setName("SketchConstraintCoincidence_32")
 350 SketchConstraintCoincidence_57 = Sketch_4.setCoincident(SketchLine_38.startPoint(), SketchArc_12.startPoint())
 351 SketchConstraintCoincidence_57.setName("SketchConstraintCoincidence_33")
 352 SketchConstraintCoincidence_58 = Sketch_4.setCoincident(SketchArc_12.endPoint(), SketchLine_31.endPoint())
 353 SketchConstraintCoincidence_58.setName("SketchConstraintCoincidence_34")
 354 SketchConstraintCoincidence_59 = Sketch_4.setCoincident(SketchArc_12.center(), SketchLine_32.endPoint())
 355 SketchConstraintCoincidence_59.setName("SketchConstraintCoincidence_35")
 356 SketchArc_13 = Sketch_4.addArc(3.457737973711348, 3.788069295318559e-014, 6.25, 0, 4.894344934278314, 2.394344934278312, False)
 357 SketchArc_13.setName("SketchArc_4")
 358 SketchArc_13.result().setName("SketchArc_4")
 359 SketchArc_13.results()[1].setName("SketchArc_4_2")
 360 SketchConstraintCoincidence_60 = Sketch_4.setCoincident(SketchArc_13.startPoint(), SketchLine_35.startPoint())
 361 SketchConstraintCoincidence_60.setName("SketchConstraintCoincidence_48")
 362 SketchConstraintCoincidence_61 = Sketch_4.setCoincident(SketchArc_13.endPoint(), SketchArc_12.endPoint())
 363 SketchConstraintCoincidence_61.setName("SketchConstraintCoincidence_49")
 364 SketchConstraintCoincidence_43 = Sketch_4.setCoincident(SketchArc_13.center(), SketchLine_32.result())
 365 SketchConstraintCoincidence_43.setName("SketchConstraintCoincidence_21")
 366 SketchConstraintMirror_1 = Sketch_4.addMirror(SketchLine_40.result(), [SketchArc_13.results()[1], SketchArc_12.results()[1]])
 367 [SketchArc_14, SketchArc_15] = SketchConstraintMirror_1.mirrored()
 368 SketchArc_15.setName("SketchArc_6")
 369 SketchArc_15.result().setName("SketchArc_6")
 370 SketchArc_15.results()[1].setName("SketchArc_6_2")
 371 SketchArc_14.setName("SketchArc_5")
 372 SketchArc_14.result().setName("SketchArc_5")
 373 SketchArc_14.results()[1].setName("SketchArc_5_2")
 374 SketchConstraintMirror_2_objects = [SketchArc_12.results()[1], SketchArc_13.results()[1], SketchArc_14.results()[1], SketchArc_15.results()[1]]
 375 SketchConstraintMirror_2 = Sketch_4.addMirror(SketchLine_39.result(), SketchConstraintMirror_2_objects)
 376 [SketchArc_16, SketchArc_17, SketchArc_18, SketchArc_19] = SketchConstraintMirror_2.mirrored()
 377 SketchArc_19.setName("SketchArc_10")
 378 SketchArc_19.result().setName("SketchArc_10")
 379 SketchArc_19.results()[1].setName("SketchArc_10_2")
 380 SketchArc_18.setName("SketchArc_9")
 381 SketchArc_18.result().setName("SketchArc_9")
 382 SketchArc_18.results()[1].setName("SketchArc_9_2")
 383 SketchArc_17.setName("SketchArc_8")
 384 SketchArc_17.result().setName("SketchArc_8")
 385 SketchArc_17.results()[1].setName("SketchArc_8_2")
 386 SketchArc_16.setName("SketchArc_7")
 387 SketchArc_16.result().setName("SketchArc_7")
 388 SketchArc_16.results()[1].setName("SketchArc_7_2")
 389 model.do()
 390 Sketch_5 = model.addSketch(Part_2_doc, model.defaultPlane("XOZ"))
 391 SketchArc_20 = Sketch_5.addArc(75, 0, 21.9522369740045, 53.01825004597796, 20.93617039352901, -51.98174995402206, False)
 392 SketchArc_20.setName("SketchArc_3")
 393 SketchArc_20.result().setName("SketchArc_3")
 394 SketchArc_20.results()[1].setName("SketchArc_3_2")
 395 SketchArc_20.setAuxiliary(True)
 396 SketchConstraintRadius_7 = Sketch_5.setRadius(SketchArc_20.results()[1], 75)
 397 SketchLine_41 = Sketch_5.addLine(model.selection("EDGE", "PartSet/OX"))
 398 SketchLine_41.setName("SketchLine_13")
 399 SketchLine_41.result().setName("SketchLine_13")
 400 SketchConstraintCoincidence_73 = Sketch_5.setCoincident(SketchArc_20.center(), SketchLine_41.result())
 401 SketchConstraintCoincidence_73.setName("SketchConstraintCoincidence_38")
 402 SketchConstraintCoincidence_74 = Sketch_5.setCoincident(SketchLine_41.startPoint(), SketchArc_20.results()[1])
 403 SketchConstraintCoincidence_74.setName("SketchConstraintCoincidence_39")
 404 SketchLine_42 = Sketch_5.addLine(16.9522369740045, -56.98174995402205, 16.9522369740045, -46.98174995402206)
 405 SketchLine_42.setName("SketchLine_14")
 406 SketchLine_42.result().setName("SketchLine_14")
 407 SketchLine_43 = Sketch_5.addLine(16.9522369740045, -46.98174995402206, 36.95223697400451, -46.98174995402206)
 408 SketchLine_43.setName("SketchLine_15")
 409 SketchLine_43.result().setName("SketchLine_15")
 410 SketchConstraintCoincidence_75 = Sketch_5.setCoincident(SketchLine_42.endPoint(), SketchLine_43.startPoint())
 411 SketchConstraintCoincidence_75.setName("SketchConstraintCoincidence_40")
 412 SketchLine_44 = Sketch_5.addLine(36.95223697400451, -46.98174995402206, 31.17873428210827, -56.98174995402205)
 413 SketchLine_44.setName("SketchLine_16")
 414 SketchLine_44.result().setName("SketchLine_16")
 415 SketchConstraintCoincidence_76 = Sketch_5.setCoincident(SketchLine_43.endPoint(), SketchLine_44.startPoint())
 416 SketchConstraintCoincidence_76.setName("SketchConstraintCoincidence_41")
 417 SketchLine_45 = Sketch_5.addLine(31.17873428210827, -56.98174995402205, 16.9522369740045, -56.98174995402205)
 418 SketchLine_45.setName("SketchLine_17")
 419 SketchLine_45.result().setName("SketchLine_17")
 420 SketchConstraintCoincidence_77 = Sketch_5.setCoincident(SketchLine_44.endPoint(), SketchLine_45.startPoint())
 421 SketchConstraintCoincidence_77.setName("SketchConstraintCoincidence_42")
 422 SketchConstraintCoincidence_78 = Sketch_5.setCoincident(SketchLine_42.startPoint(), SketchLine_45.endPoint())
 423 SketchConstraintCoincidence_78.setName("SketchConstraintCoincidence_43")
 424 SketchConstraintHorizontal_5 = Sketch_5.setHorizontal(SketchLine_43.result())
 425 SketchConstraintHorizontal_6 = Sketch_5.setHorizontal(SketchLine_45.result())
 426 SketchConstraintVertical_5 = Sketch_5.setVertical(SketchLine_42.result())
 427 SketchConstraintAngle_4 = Sketch_5.setAngleComplementary(SketchLine_44.result(), SketchLine_45.result(), 60.00000000000006)
 428 SketchConstraintDistance_14 = Sketch_5.setDistance(SketchLine_43.endPoint(), SketchLine_42.result(), 20)
 429 SketchConstraintDistance_15 = Sketch_5.setDistance(SketchLine_42.startPoint(), SketchLine_43.result(), 10)
 430 SketchLine_46 = Sketch_5.addLine(21.9522369740045, 53.01825004597796, 21.9522369740045, 0)
 431 SketchLine_46.setName("SketchLine_18")
 432 SketchLine_46.result().setName("SketchLine_18")
 433 SketchLine_46.setAuxiliary(True)
 434 SketchConstraintCoincidence_79 = Sketch_5.setCoincident(SketchArc_20.startPoint(), SketchLine_46.startPoint())
 435 SketchConstraintCoincidence_79.setName("SketchConstraintCoincidence_44")
 436 SketchConstraintCoincidence_80 = Sketch_5.setCoincident(SketchLine_46.endPoint(), SketchLine_41.result())
 437 SketchConstraintCoincidence_80.setName("SketchConstraintCoincidence_45")
 438 SketchConstraintVertical_6 = Sketch_5.setVertical(SketchLine_46.result())
 439 SketchConstraintDistance_16 = Sketch_5.setDistance(SketchLine_42.endPoint(), SketchLine_46.result(), 5)
 440 SketchConstraintDistance_17 = Sketch_5.setDistance(SketchArc_20.startPoint(), SketchLine_43.result(), 100)
 441 SketchCircle_6 = Sketch_5.addCircle(21.9522369740045, 53.01825004597796, 8)
 442 SketchConstraintCoincidence_81 = Sketch_5.setCoincident(SketchArc_20.startPoint(), SketchCircle_6.center())
 443 SketchConstraintCoincidence_81.setName("SketchConstraintCoincidence_46")
 444 SketchConstraintCoincidence_82 = Sketch_5.setCoincident(SketchLine_46.startPoint(), SketchCircle_6.center())
 445 SketchConstraintCoincidence_82.setName("SketchConstraintCoincidence_47")
 446 SketchConstraintRadius_8 = Sketch_5.setRadius(SketchCircle_6.results()[1], 8)
 447 SketchCircle_7 = Sketch_5.addCircle(21.9522369740045, 53.01825004597796, 4)
 448 SketchConstraintCoincidence_83 = Sketch_5.setCoincident(SketchArc_20.startPoint(), SketchCircle_7.center())
 449 SketchConstraintCoincidence_83.setName("SketchConstraintCoincidence_61")
 450 SketchConstraintCoincidence_84 = Sketch_5.setCoincident(SketchLine_46.startPoint(), SketchCircle_7.center())
 451 SketchConstraintCoincidence_84.setName("SketchConstraintCoincidence_62")
 452 SketchConstraintCoincidence_85 = Sketch_5.setCoincident(SketchCircle_6.center(), SketchCircle_7.center())
 453 SketchConstraintCoincidence_85.setName("SketchConstraintCoincidence_63")
 454 SketchConstraintRadius_9 = Sketch_5.setRadius(SketchCircle_7.results()[1], 4)
 455 SketchLine_47 = Sketch_5.addLine(21.9522369740045, 53.01825004597796, 39.68353296044558, 53.01825004597796)
 456 SketchLine_47.setName("SketchLine_19")
 457 SketchLine_47.result().setName("SketchLine_19")
 458 SketchLine_47.setAuxiliary(True)
 459 SketchConstraintCoincidence_86 = Sketch_5.setCoincident(SketchArc_20.startPoint(), SketchLine_47.startPoint())
 460 SketchConstraintCoincidence_86.setName("SketchConstraintCoincidence_64")
 461 SketchConstraintCoincidence_87 = Sketch_5.setCoincident(SketchLine_46.startPoint(), SketchLine_47.startPoint())
 462 SketchConstraintCoincidence_87.setName("SketchConstraintCoincidence_65")
 463 SketchConstraintCoincidence_88 = Sketch_5.setCoincident(SketchCircle_6.center(), SketchLine_47.startPoint())
 464 SketchConstraintCoincidence_88.setName("SketchConstraintCoincidence_66")
 465 SketchConstraintCoincidence_89 = Sketch_5.setCoincident(SketchCircle_7.center(), SketchLine_47.startPoint())
 466 SketchConstraintCoincidence_89.setName("SketchConstraintCoincidence_67")
 467 SketchConstraintHorizontal_7 = Sketch_5.setHorizontal(SketchLine_47.result())
 468 SketchConstraintDistance_18 = Sketch_5.setDistance(SketchArc_20.endPoint(), SketchLine_47.result(), 105)
 469 SketchLine_48 = Sketch_5.addLine(75, 0, 20.93617039352901, -51.98174995402206)
 470 SketchLine_48.setName("SketchLine_20")
 471 SketchLine_48.result().setName("SketchLine_20")
 472 SketchLine_48.setAuxiliary(True)
 473 SketchConstraintCoincidence_90 = Sketch_5.setCoincident(SketchArc_20.center(), SketchLine_48.startPoint())
 474 SketchConstraintCoincidence_90.setName("SketchConstraintCoincidence_68")
 475 SketchConstraintCoincidence_91 = Sketch_5.setCoincident(SketchArc_20.endPoint(), SketchLine_48.endPoint())
 476 SketchConstraintCoincidence_91.setName("SketchConstraintCoincidence_69")
 477 SketchLine_49 = Sketch_5.addLine(21.9522369740045, 53.01825004597796, 0, 10)
 478 SketchLine_49.setName("SketchLine_21")
 479 SketchLine_49.result().setName("SketchLine_21")
 480 SketchLine_49.setAuxiliary(True)
 481 SketchConstraintCoincidence_92 = Sketch_5.setCoincident(SketchArc_20.startPoint(), SketchLine_49.startPoint())
 482 SketchConstraintCoincidence_92.setName("SketchConstraintCoincidence_70")
 483 SketchConstraintCoincidence_93 = Sketch_5.setCoincident(SketchLine_46.startPoint(), SketchLine_49.startPoint())
 484 SketchConstraintCoincidence_93.setName("SketchConstraintCoincidence_71")
 485 SketchConstraintCoincidence_94 = Sketch_5.setCoincident(SketchCircle_6.center(), SketchLine_49.startPoint())
 486 SketchConstraintCoincidence_94.setName("SketchConstraintCoincidence_72")
 487 SketchConstraintCoincidence_95 = Sketch_5.setCoincident(SketchCircle_7.center(), SketchLine_49.startPoint())
 488 SketchConstraintCoincidence_95.setName("SketchConstraintCoincidence_73")
 489 SketchConstraintCoincidence_96 = Sketch_5.setCoincident(SketchLine_47.startPoint(), SketchLine_49.startPoint())
 490 SketchConstraintCoincidence_96.setName("SketchConstraintCoincidence_74")
 491 SketchLine_50 = Sketch_5.addLine(model.selection("EDGE", "PartSet/OZ"))
 492 SketchLine_50.setName("SketchLine_22")
 493 SketchLine_50.result().setName("SketchLine_22")
 494 SketchConstraintCoincidence_97 = Sketch_5.setCoincident(SketchLine_49.endPoint(), SketchLine_50.result())
 495 SketchConstraintCoincidence_97.setName("SketchConstraintCoincidence_75")
 496 SketchConstraintDistance_19 = Sketch_5.setDistance(SketchLine_49.endPoint(), SketchLine_41.result(), 10)
 497 model.do()
 498 Face_1 = model.addFace(Part_2_doc, [model.selection("WIRE", "Sketch_1/Face-SketchArc_1_2f-SketchArc_7_2f-SketchArc_8_2f-SketchArc_9_2f-SketchArc_10_2f-SketchArc_6_2f-SketchArc_5_2f-SketchArc_4_2f_wire")])
 499 Axis_4 = model.addAxis(Part_2_doc, model.selection("FACE", "PartSet/XOZ"), model.selection("VERTEX", "Sketch_2/SketchArc_3"))
 500 Rotation_3 = model.addRotation(Part_2_doc, [model.selection("FACE", "Face_1_1")], model.selection("EDGE", "Axis_1"), -43.8752)
 501 Pipe_1 = model.addPipe(Part_2_doc, [model.selection("FACE", "Rotation_1_1")], model.selection("EDGE", "Sketch_2/SketchArc_3_2"))
 502 Extrusion_3 = model.addExtrusion(Part_2_doc, [model.selection("WIRE", "Sketch_2/Face-SketchCircle_2_2f-SketchCircle_3_2r_wire"), model.selection("WIRE", "Sketch_2/Face-SketchLine_17r-SketchLine_16r-SketchLine_15r-SketchLine_14r_wire")], model.selection(), "Gap/2", "Gap/2")
 503 Fuse_1 = model.addFuse(Part_2_doc, [model.selection("SOLID", "Pipe_1_1")], [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_2")])
 504 Extrusion_4 = model.addExtrusion(Part_2_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_3_2f")], model.selection(), "Gap", "Gap")
 505 Cut_1 = model.addCut(Part_2_doc, [model.selection("SOLID", "Fuse_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
 506 Translation_1 = model.addTranslation(Part_2_doc, [model.selection("SOLID", "Cut_1_1")], model.selection("VERTEX", "Sketch_2/SketchCircle_2_2__cc"), model.selection("VERTEX", "Sketch_2/SketchLine_21_EndVertex"))
 507 model.do()
 508 Part_3 = model.duplicatePart(Part_2)
 509 Part_3.setName("Arm 2")
 510 model.do()
 511 Part_4 = model.duplicatePart(Part_3)
 512 Part_4.setName("Arm 3")
 513 model.do()
 514 Translation_4 = model.addTranslation(partSet, [model.selection("COMPOUND", "Part_2/"), model.selection("COMPOUND", "Part_3/"), model.selection("COMPOUND", "Part_4/")], model.selection("EDGE", "OX"), -40)
 515 Rotation_6 = model.addRotation(partSet, [model.selection("COMPOUND", "Translation_1_2/")], model.selection("EDGE", "OZ"), 120)
 516 Rotation_7 = model.addRotation(partSet, [model.selection("COMPOUND", "Translation_1_3/")], model.selection("EDGE", "OZ"), 240)
 517 Part_5 = model.addPart(partSet)
 518 Part_5.setName("Rod part")
 519 Part_5_doc = Part_5.document()
 520 Parameter_H = model.addParameter(partSet, "H", "110")
 521 Sketch_10 = model.addSketch(Part_5_doc, model.defaultPlane("YOZ"))
 522 SketchLine_93 = Sketch_10.addLine(0, 25, 6, 25)
 523 SketchLine_94 = Sketch_10.addLine(6, 25, 6, -75)
 524 SketchConstraintCoincidence_232 = Sketch_10.setCoincident(SketchLine_93.endPoint(), SketchLine_94.startPoint())
 525 SketchLine_95 = Sketch_10.addLine(6, -75, 4, -75)
 526 SketchConstraintCoincidence_233 = Sketch_10.setCoincident(SketchLine_94.endPoint(), SketchLine_95.startPoint())
 527 SketchLine_96 = Sketch_10.addLine(4, -75, 4, -81.00000000054168)
 528 SketchConstraintCoincidence_234 = Sketch_10.setCoincident(SketchLine_95.endPoint(), SketchLine_96.startPoint())
 529 SketchLine_97 = Sketch_10.addLine(4, -81.00000000054168, 0, -85)
 530 SketchConstraintCoincidence_235 = Sketch_10.setCoincident(SketchLine_96.endPoint(), SketchLine_97.startPoint())
 531 SketchLine_98 = Sketch_10.addLine(0, -85, 0, 25)
 532 SketchConstraintCoincidence_236 = Sketch_10.setCoincident(SketchLine_97.endPoint(), SketchLine_98.startPoint())
 533 SketchConstraintCoincidence_237 = Sketch_10.setCoincident(SketchLine_93.startPoint(), SketchLine_98.endPoint())
 534 SketchConstraintVertical_15 = Sketch_10.setVertical(SketchLine_98.result())
 535 SketchConstraintVertical_16 = Sketch_10.setVertical(SketchLine_94.result())
 536 SketchConstraintVertical_17 = Sketch_10.setVertical(SketchLine_96.result())
 537 SketchConstraintHorizontal_18 = Sketch_10.setHorizontal(SketchLine_93.result())
 538 SketchConstraintHorizontal_19 = Sketch_10.setHorizontal(SketchLine_95.result())
 539 SketchConstraintAngle_7 = Sketch_10.setAngle(SketchLine_97.result(), SketchLine_98.result(), 45.00000000387975)
 540 SketchConstraintDistance_32 = Sketch_10.setDistance(SketchLine_97.endPoint(), SketchLine_95.result(), 10)
 541 SketchConstraintDistance_33 = Sketch_10.setDistance(SketchLine_97.startPoint(), SketchLine_98.result(), 4)
 542 SketchConstraintLength_7 = Sketch_10.setLength(SketchLine_93.result(), "Rod/2")
 543 SketchConstraintDistance_34 = Sketch_10.setDistance(SketchLine_97.endPoint(), SketchLine_93.result(), "H")
 544 SketchPoint_7 = Sketch_10.addPoint(model.selection("VERTEX", "PartSet/Origin"))
 545 SketchConstraintCoincidence_238 = Sketch_10.setCoincident(SketchPoint_7.coordinates(), SketchLine_98.result())
 546 SketchLine_99 = Sketch_10.addLine(model.selection("EDGE", "PartSet/OY"))
 547 SketchConstraintDistance_35 = Sketch_10.setDistance(SketchLine_98.endPoint(), SketchLine_99.result(), "Thickness")
 548 model.do()
 549 Revolution_2 = model.addRevolution(Part_5_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_6r-SketchLine_5r-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r")], model.selection("EDGE", "Sketch_1/SketchLine_6"), 360, 0)
 550 Sketch_11 = model.addSketch(Part_5_doc, model.selection("FACE", "Revolution_1_1/Generated_Face&Sketch_1/SketchLine_1"))
 551 SketchCircle_14 = Sketch_11.addCircle(0, 0, 8.5)
 552 SketchCircle_14.setAuxiliary(True)
 553 SketchPoint_8 = Sketch_11.addPoint(model.selection("VERTEX", "Sketch_1/SketchLine_1_StartVertex"))
 554 SketchConstraintCoincidence_239 = Sketch_11.setCoincident(SketchCircle_14.center(), SketchPoint_8.result())
 555 SketchConstraintRadius_18 = Sketch_11.setRadius(SketchCircle_14.results()[1], "(Rod+5)/2")
 556 SketchLine_100 = Sketch_11.addLine(-8.5, -4.907477288111821, -8.5, 4.907477288111821)
 557 SketchLine_101 = Sketch_11.addLine(-8.5, 4.907477288111821, -2.182790672831509e-014, 9.814954576223595)
 558 SketchConstraintCoincidence_240 = Sketch_11.setCoincident(SketchLine_100.endPoint(), SketchLine_101.startPoint())
 559 SketchLine_102 = Sketch_11.addLine(-2.182790672831509e-014, 9.814954576223595, 8.5, 4.907477288111624)
 560 SketchConstraintCoincidence_241 = Sketch_11.setCoincident(SketchLine_101.endPoint(), SketchLine_102.startPoint())
 561 SketchLine_103 = Sketch_11.addLine(8.5, 4.907477288111624, 8.5, -4.907477288111966)
 562 SketchConstraintCoincidence_242 = Sketch_11.setCoincident(SketchLine_102.endPoint(), SketchLine_103.startPoint())
 563 SketchLine_104 = Sketch_11.addLine(8.5, -4.907477288111966, 4.843087198023196e-015, -9.814954576223641)
 564 SketchConstraintCoincidence_243 = Sketch_11.setCoincident(SketchLine_103.endPoint(), SketchLine_104.startPoint())
 565 SketchLine_105 = Sketch_11.addLine(4.843087198023196e-015, -9.814954576223641, -8.5, -4.907477288111821)
 566 SketchConstraintCoincidence_244 = Sketch_11.setCoincident(SketchLine_104.endPoint(), SketchLine_105.startPoint())
 567 SketchConstraintCoincidence_245 = Sketch_11.setCoincident(SketchLine_100.startPoint(), SketchLine_105.endPoint())
 568 SketchConstraintVertical_18 = Sketch_11.setVertical(SketchLine_100.result())
 569 SketchConstraintVertical_19 = Sketch_11.setVertical(SketchLine_103.result())
 570 SketchConstraintTangent_15 = Sketch_11.setTangent(SketchCircle_14.results()[1], SketchLine_103.result())
 571 SketchConstraintTangent_16 = Sketch_11.setTangent(SketchCircle_14.results()[1], SketchLine_100.result())
 572 SketchConstraintTangent_17 = Sketch_11.setTangent(SketchLine_104.result(), SketchCircle_14.results()[1])
 573 SketchConstraintTangent_18 = Sketch_11.setTangent(SketchLine_105.result(), SketchCircle_14.results()[1])
 574 SketchConstraintTangent_19 = Sketch_11.setTangent(SketchLine_101.result(), SketchCircle_14.results()[1])
 575 SketchConstraintTangent_20 = Sketch_11.setTangent(SketchLine_102.result(), SketchCircle_14.results()[1])
 576 SketchConstraintEqual_7 = Sketch_11.setEqual(SketchLine_100.result(), SketchLine_101.result())
 577 SketchConstraintEqual_8 = Sketch_11.setEqual(SketchLine_101.result(), SketchLine_102.result())
 578 SketchConstraintEqual_9 = Sketch_11.setEqual(SketchLine_102.result(), SketchLine_103.result())
 579 SketchConstraintEqual_10 = Sketch_11.setEqual(SketchLine_103.result(), SketchLine_104.result())
 580 model.do()
 581 Extrusion_9 = model.addExtrusion(Part_5_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_13r-SketchLine_12r-SketchLine_11r-SketchLine_10r-SketchLine_9r-SketchLine_8r")], model.selection(), 25, 0)
 582 Sketch_12 = model.addSketch(Part_5_doc, model.standardPlane("YOZ"))
 583 SketchLine_106 = Sketch_12.addLine(9.814954576223595, 48.99999999999999, 9.814954576223595, 52.35726558990813)
 584 SketchLine_107 = Sketch_12.addLine(9.814954576223595, 52.35726558990813, 4, 52.35726558990813)
 585 SketchConstraintCoincidence_246 = Sketch_12.setCoincident(SketchLine_106.endPoint(), SketchLine_107.startPoint())
 586 SketchLine_108 = Sketch_12.addLine(4, 52.35726558990813, 9.814954576223595, 48.99999999999999)
 587 SketchConstraintCoincidence_247 = Sketch_12.setCoincident(SketchLine_107.endPoint(), SketchLine_108.startPoint())
 588 SketchConstraintCoincidence_248 = Sketch_12.setCoincident(SketchLine_106.startPoint(), SketchLine_108.endPoint())
 589 SketchConstraintHorizontal_20 = Sketch_12.setHorizontal(SketchLine_107.result())
 590 SketchConstraintVertical_20 = Sketch_12.setVertical(SketchLine_106.result())
 591 SketchConstraintAngle_8 = Sketch_12.setAngle(SketchLine_108.result(), SketchLine_107.result(), 30)
 592 SketchLine_109 = Sketch_12.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_2/SketchLine_10][Extrusion_1_1/Generated_Face&Sketch_2/SketchLine_9]"))
 593 SketchConstraintCoincidence_249 = Sketch_12.setCoincident(SketchLine_108.endPoint(), SketchLine_109.result())
 594 SketchProjection_2 = Sketch_12.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_2/SketchLine_10][Extrusion_1_1/To_Face]"), False)
 595 SketchLine_110 = SketchProjection_2.createdFeature()
 596 SketchConstraintDistance_36 = Sketch_12.setDistance(SketchLine_110.result(), SketchLine_108.endPoint(), 1)
 597 SketchLine_111 = Sketch_12.addLine(model.selection("EDGE", "PartSet/OZ"))
 598 SketchConstraintDistance_37 = Sketch_12.setDistance(SketchLine_108.startPoint(), SketchLine_111.result(), 4)
 599 model.do()
 600 Revolution_3 = model.addRevolution(Part_5_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_14r-SketchLine_15f-SketchLine_16f")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
 601 Cut_12 = model.addCut(Part_5_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Revolution_2_1")])
 602 Cut_13 = model.addFuse(Part_5_doc, [model.selection("SOLID", "Cut_1_1"), model.selection("SOLID", "Revolution_1_1")], [])
 603
 604 # Test reexecution after parameter change
 605 Parameter_H.setValue(120)
 606 model.do()
 607 model.testResultsVolumes(Part_5, [19052.771316640515578910708427429])
 608 Parameter_H.setValue(110)
 609 model.do()
 610 model.end()
 611
 612 from GeomAPI import  GeomAPI_Shape
 613
 614 model.testNbResults(Part_1, 1)
 615 model.testNbSubResults(Part_1, [0])
 616 model.testNbSubShapes(Part_1, GeomAPI_Shape.SOLID, [1])
 617 model.testNbSubShapes(Part_1, GeomAPI_Shape.FACE, [52])
 618 model.testNbSubShapes(Part_1, GeomAPI_Shape.EDGE, [338])
 619 model.testNbSubShapes(Part_1, GeomAPI_Shape.VERTEX, [676])
 620 model.testResultsVolumes(Part_1, [48835.437112214101944118738174438])
 621
 622 model.testNbResults(Translation_4, 3)
 623 model.testNbSubResults(Translation_4, [0, 0, 0])
 624 model.testNbSubShapes(Translation_4, GeomAPI_Shape.SOLID, [1, 1, 1])
 625 model.testNbSubShapes(Translation_4, GeomAPI_Shape.FACE, [19, 19, 19])
 626 model.testNbSubShapes(Translation_4, GeomAPI_Shape.EDGE, [102, 102, 102])
 627 model.testNbSubShapes(Translation_4, GeomAPI_Shape.VERTEX, [204, 204, 204])
 628 model.testResultsVolumes(Translation_4, [11018.354015402081131469458341599, 11018.354015402081131469458341599, 11018.354015402081131469458341599])
 629
 630 model.testNbResults(Rotation_6, 1)
 631 model.testNbSubResults(Rotation_6, [0])
 632 model.testNbSubShapes(Rotation_6, GeomAPI_Shape.SOLID, [1])
 633 model.testNbSubShapes(Rotation_6, GeomAPI_Shape.FACE, [19])
 634 model.testNbSubShapes(Rotation_6, GeomAPI_Shape.EDGE, [102])
 635 model.testNbSubShapes(Rotation_6, GeomAPI_Shape.VERTEX, [204])
 636 model.testResultsVolumes(Rotation_6, [11018.354015402079312480054795742])
 637
 638 model.testNbResults(Rotation_7, 1)
 639 model.testNbSubResults(Rotation_7, [0])
 640 model.testNbSubShapes(Rotation_7, GeomAPI_Shape.SOLID, [1])
 641 model.testNbSubShapes(Rotation_7, GeomAPI_Shape.FACE, [19])
 642 model.testNbSubShapes(Rotation_7, GeomAPI_Shape.EDGE, [102])
 643 model.testNbSubShapes(Rotation_7, GeomAPI_Shape.VERTEX, [204])
 644 model.testResultsVolumes(Rotation_7, [11018.354015402079312480054795742])
 645
 646 model.testNbResults(Part_5, 1)
 647 model.testNbSubResults(Part_5, [0])
 648 model.testNbSubShapes(Part_5, GeomAPI_Shape.SOLID, [1])
 649 model.testNbSubShapes(Part_5, GeomAPI_Shape.FACE, [13])
 650 model.testNbSubShapes(Part_5, GeomAPI_Shape.EDGE, [55])
 651 model.testNbSubShapes(Part_5, GeomAPI_Shape.VERTEX, [110])
 652 model.testResultsVolumes(Part_5, [17921.797961347954696975648403168])
 653
 654 assert(model.checkPythonDump())