test.models/angle30.py

   1 from salome.shaper import model
   2
   3 model.begin()
   4 partSet = model.moduleDocument()
   5 Part_1 = model.addPart(partSet)
   6 Part_1_doc = Part_1.document()
   7 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
   8 SketchLine_1 = Sketch_1.addLine(50, 70, 50, 9.237629881196027)
   9 SketchLine_1.setName("SketchLine_10")
  10 SketchLine_1.result().setName("SketchLine_10")
  11 SketchLine_2 = Sketch_1.addLine(41.99999565114199, -4.618804664331344, -53.92304845413265, -59.99999999999996)
  12 SketchLine_2.setName("SketchLine_11")
  13 SketchLine_2.result().setName("SketchLine_11")
  14 SketchLine_3 = Sketch_1.addLine(50, 70, 50, 0)
  15 SketchLine_3.setName("SketchLine_1")
  16 SketchLine_3.result().setName("SketchLine_1")
  17 SketchLine_3.setAuxiliary(True)
  18 SketchLine_4 = Sketch_1.addLine(50, 0, -53.92304845413265, -59.99999999999996)
  19 SketchLine_4.setName("SketchLine_2")
  20 SketchLine_4.result().setName("SketchLine_2")
  21 SketchLine_4.setAuxiliary(True)
  22 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  23 SketchLine_5 = Sketch_1.addLine(44, 9.237575007509296, 44, 70)
  24 SketchLine_5.setName("SketchLine_8")
  25 SketchLine_5.result().setName("SketchLine_8")
  26 SketchLine_6 = Sketch_1.addLine(-53.92304845413265, -59.99999999999996, -56.92304845413265, -54.80384757729332)
  27 SketchLine_6.setName("SketchLine_3")
  28 SketchLine_6.result().setName("SketchLine_3")
  29 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_6.startPoint())
  30 SketchLine_7 = Sketch_1.addLine(-56.92304845413265, -54.80384757729332, 39.00000555191657, 0.5773534745901636)
  31 SketchLine_7.setName("SketchLine_9")
  32 SketchLine_7.result().setName("SketchLine_9")
  33 SketchLine_8 = Sketch_1.addLine(-56.92304845413265, -54.80384757729332, 44, 3.464101615137769)
  34 SketchLine_8.setName("SketchLine_4")
  35 SketchLine_8.result().setName("SketchLine_4")
  36 SketchLine_8.setAuxiliary(True)
  37 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_8.startPoint())
  38 SketchLine_9 = Sketch_1.addLine(44, 3.464101615137769, 44, 70)
  39 SketchLine_9.setName("SketchLine_5")
  40 SketchLine_9.result().setName("SketchLine_5")
  41 SketchLine_9.setAuxiliary(True)
  42 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  43 SketchLine_10 = Sketch_1.addLine(44, 70, 50, 70)
  44 SketchLine_10.setName("SketchLine_6")
  45 SketchLine_10.result().setName("SketchLine_6")
  46 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
  47 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchLine_10.endPoint())
  48 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_3.result())
  49 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_9.result())
  50 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_10.result())
  51 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_3.startPoint(), SketchLine_9.result(), 6)
  52 SketchLine_11 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OZ"))
  53 SketchLine_11.setName("SketchLine_7")
  54 SketchLine_11.result().setName("SketchLine_7")
  55 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_3.startPoint(), SketchLine_11.result(), 50)
  56 SketchArc_1 = Sketch_1.addArc(34, 9.23760430703403, 39.00000555191657, 0.5773534745901636, 44, 9.237575007509296, False)
  57 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_7.endPoint())
  58 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_5.startPoint())
  59 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_5.result())
  60 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_7.result())
  61 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_5.endPoint())
  62 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_8.startPoint(), SketchLine_7.startPoint())
  63 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_9.result())
  64 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.result())
  65 SketchArc_2 = Sketch_1.addArc(34, 9.237604307034017, 41.99999565114199, -4.618804664331344, 50, 9.237629881196027, False)
  66 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_2.startPoint())
  67 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_1.endPoint())
  68 SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_1.result())
  69 SketchConstraintTangent_4 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_2.result())
  70 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchLine_1.startPoint())
  71 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_2.endPoint())
  72 SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.result())
  73 SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchLine_4.result())
  74 SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_1.startPoint(), SketchLine_4.startPoint(), 70)
  75 SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_2.result(), SketchLine_6.result())
  76 SketchConstraintDistance_4 = Sketch_1.setDistance(SketchLine_6.endPoint(), SketchLine_2.result(), 6)
  77 SketchConstraintParallel_1 = Sketch_1.setParallel(SketchLine_2.result(), SketchLine_7.result())
  78 SketchConstraintAngle_1 = Sketch_1.setAngle(SketchLine_1.result(), SketchLine_2.result(), 120)
  79 SketchConstraintDistance_5 = Sketch_1.setDistance(SketchLine_4.startPoint(), SketchLine_6.startPoint(), 120)
  80 SketchLine_12 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OY"))
  81 SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchLine_4.startPoint(), SketchLine_12.result())
  82 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_2.results()[1], 16)
  83 SketchConstraintRadius_1.setName("SketchConstraintRadius_3")
  84 SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_1.results()[1], 10)
  85 SketchConstraintRadius_2.setName("SketchConstraintRadius_4")
  86 model.do()
  87 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  88 SketchCircle_1 = Sketch_2.addCircle(0, 0, 17.5)
  89 SketchPoint_1 = Sketch_2.addPoint(model.selection("VERTEX", "PartSet/Origin"))
  90 SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchCircle_1.center(), SketchPoint_1.result())
  91 SketchConstraintRadius_3 = Sketch_2.setRadius(SketchCircle_1.results()[1], 17.5)
  92 SketchConstraintRadius_3.setName("SketchConstraintRadius_1")
  93 SketchCircle_2 = Sketch_2.addCircle(0, 0, 14.5)
  94 SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchCircle_1.center(), SketchCircle_2.center())
  95 SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchPoint_1.coordinates(), SketchCircle_2.center())
  96 SketchConstraintRadius_4 = Sketch_2.setRadius(SketchCircle_2.results()[1], 14.5)
  97 SketchConstraintRadius_4.setName("SketchConstraintRadius_2")
  98 model.do()
  99 Sketch_3 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
 100 SketchLine_13 = Sketch_3.addLine(-22, 70, -22, -35.79571668975675)
 101 SketchLine_14 = Sketch_3.addLine(-22, -35.79571668975675, 55, 8.660254037844405)
 102 SketchConstraintCoincidence_23 = Sketch_3.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
 103 SketchLine_15 = Sketch_3.addLine(55, 8.660254037844405, 55, 70)
 104 SketchConstraintCoincidence_24 = Sketch_3.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
 105 SketchLine_16 = Sketch_3.addLine(55, 70, -22, 70)
 106 SketchConstraintCoincidence_25 = Sketch_3.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint())
 107 SketchConstraintCoincidence_26 = Sketch_3.setCoincident(SketchLine_13.startPoint(), SketchLine_16.endPoint())
 108 SketchConstraintHorizontal_2 = Sketch_3.setHorizontal(SketchLine_16.result())
 109 SketchConstraintVertical_3 = Sketch_3.setVertical(SketchLine_15.result())
 110 SketchConstraintVertical_4 = Sketch_3.setVertical(SketchLine_13.result())
 111 SketchLine_17 = Sketch_3.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"))
 112 SketchConstraintParallel_2 = Sketch_3.setParallel(SketchLine_14.result(), SketchLine_17.result())
 113 SketchConstraintDistance_6 = Sketch_3.setDistance(SketchLine_14.endPoint(), SketchLine_17.result(), 1)
 114 SketchLine_18 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OZ"))
 115 SketchConstraintDistance_7 = Sketch_3.setDistance(SketchLine_16.startPoint(), SketchLine_18.result(), 55)
 116 SketchConstraintDistance_8 = Sketch_3.setDistance(SketchLine_13.startPoint(), SketchLine_18.result(), 22)
 117 SketchLine_19 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OY"))
 118 SketchConstraintDistance_9 = Sketch_3.setDistance(SketchLine_15.endPoint(), SketchLine_19.result(), 70)
 119 model.do()
 120 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_1_2f")], model.selection(), 75, 45)
 121 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 22, 22)
 122 Boolean_1 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
 123 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOY"))
 124 SketchLine_20 = Sketch_4.addLine(-4, 37.99998118249049, -4, 21.27189364217905)
 125 SketchLine_20.setName("SketchLine_36")
 126 SketchLine_20.result().setName("SketchLine_36")
 127 SketchArc_3 = Sketch_4.addArc(0.03759597704170694, 0.09256566148481651, -8.5, 15.29705854077836, -7.430380313394083, 15.84999181264236, True)
 128 SketchArc_3.setName("SketchArc_6")
 129 SketchArc_3.result().setName("SketchArc_6")
 130 SketchArc_3.results()[1].setName("SketchArc_6_2")
 131 SketchArc_4 = Sketch_4.addArc(-0.08847833993119963, -0.2092058473112947, 7.448738798736517, 15.83437708398516, 8.5, 15.29705854077835, True)
 132 SketchArc_4.setName("SketchArc_8")
 133 SketchArc_4.result().setName("SketchArc_8")
 134 SketchArc_4.results()[1].setName("SketchArc_8_2")
 135 SketchLine_21 = Sketch_4.addLine(4, 21.26494484096588, 4, 37.99999998819019)
 136 SketchLine_21.setName("SketchLine_38")
 137 SketchLine_21.result().setName("SketchLine_38")
 138 SketchLine_22 = Sketch_4.addLine(-8.5, 15.29705854077836, -8.5, 12.23281708580693)
 139 SketchLine_23 = Sketch_4.addLine(-10.1, 44, -9.999976547916727, 44)
 140 SketchLine_23.setName("SketchLine_37")
 141 SketchLine_23.result().setName("SketchLine_37")
 142 SketchLine_24 = Sketch_4.addLine(9.999996841999446, 44, 10.1, 44)
 143 SketchLine_24.setName("SketchLine_39")
 144 SketchLine_24.result().setName("SketchLine_39")
 145 SketchLine_25 = Sketch_4.addLine(8.5, 12.23281708580693, 8.5, 15.29705854077835)
 146 SketchLine_25.setName("SketchLine_24")
 147 SketchLine_25.result().setName("SketchLine_24")
 148 SketchLine_27 = Sketch_4.addLine(4, 44.00000000000001, 10.1, 44)
 149 SketchLine_27.setAuxiliary(True)
 150 SketchLine_26 = Sketch_4.addLine(4, 17.03870823911452, 4, 44.00000000000001)
 151 SketchLine_26.setAuxiliary(True)
 152 SketchConstraintCoincidence_27 = Sketch_4.setCoincident(SketchLine_26.endPoint(), SketchLine_27.startPoint())
 153 SketchConstraintCoincidence_27.setName("SketchConstraintCoincidence_33")
 154 SketchLine_28 = Sketch_4.addLine(10.1, 44, 10.1, 45.00000000000001)
 155 SketchConstraintCoincidence_28 = Sketch_4.setCoincident(SketchLine_27.endPoint(), SketchLine_28.startPoint())
 156 SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_34")
 157 SketchLine_29 = Sketch_4.addLine(10.1, 45.00000000000001, -10.1, 45)
 158 SketchConstraintCoincidence_29 = Sketch_4.setCoincident(SketchLine_28.endPoint(), SketchLine_29.startPoint())
 159 SketchConstraintCoincidence_29.setName("SketchConstraintCoincidence_35")
 160 SketchLine_30 = Sketch_4.addLine(-10.1, 45, -10.1, 44)
 161 SketchConstraintCoincidence_30 = Sketch_4.setCoincident(SketchLine_29.endPoint(), SketchLine_30.startPoint())
 162 SketchConstraintCoincidence_30.setName("SketchConstraintCoincidence_36")
 163 SketchLine_31 = Sketch_4.addLine(-10.1, 44, -4, 44.00000000000001)
 164 SketchLine_31.setAuxiliary(True)
 165 SketchConstraintCoincidence_31 = Sketch_4.setCoincident(SketchLine_30.endPoint(), SketchLine_31.startPoint())
 166 SketchConstraintCoincidence_31.setName("SketchConstraintCoincidence_37")
 167 SketchLine_32 = Sketch_4.addLine(-4, 44.00000000000001, -4, 17.05620228544792)
 168 SketchLine_32.setName("SketchLine_20")
 169 SketchLine_32.result().setName("SketchLine_20")
 170 SketchLine_32.setAuxiliary(True)
 171 SketchConstraintCoincidence_32 = Sketch_4.setCoincident(SketchLine_32.startPoint(), SketchLine_31.endPoint())
 172 SketchConstraintCoincidence_32.setName("SketchConstraintCoincidence_38")
 173 SketchConstraintVertical_5 = Sketch_4.setVertical(SketchLine_32.result())
 174 SketchConstraintVertical_6 = Sketch_4.setVertical(SketchLine_26.result())
 175 SketchConstraintHorizontal_3 = Sketch_4.setHorizontal(SketchLine_29.result())
 176 SketchConstraintHorizontal_4 = Sketch_4.setHorizontal(SketchLine_31.result())
 177 SketchConstraintHorizontal_5 = Sketch_4.setHorizontal(SketchLine_27.result())
 178 SketchConstraintVertical_7 = Sketch_4.setVertical(SketchLine_30.result())
 179 SketchConstraintVertical_8 = Sketch_4.setVertical(SketchLine_28.result())
 180 SketchConstraintVertical_9 = Sketch_4.setVertical(SketchLine_25.result())
 181 SketchConstraintVertical_10 = Sketch_4.setVertical(SketchLine_22.result())
 182 SketchLine_33 = Sketch_4.addLine(model.selection("EDGE", "PartSet/OY"))
 183 SketchLine_33.setName("SketchLine_32")
 184 SketchLine_33.result().setName("SketchLine_32")
 185 SketchConstraintDistance_10 = Sketch_4.setDistance(SketchLine_22.startPoint(), SketchLine_32.result(), 4.5)
 186 SketchConstraintDistance_10.setName("SketchConstraintDistance_13")
 187 SketchPoint_2 = Sketch_4.addPoint(0.0367430766441097, 12.3548825983447)
 188 SketchLine_34 = Sketch_4.addLine(-8.5, 12.23281708580693, 8.5, 12.23281708580693)
 189 SketchLine_34.setName("SketchLine_33")
 190 SketchLine_34.result().setName("SketchLine_33")
 191 SketchConstraintCoincidence_33 = Sketch_4.setCoincident(SketchLine_22.endPoint(), SketchLine_34.startPoint())
 192 SketchConstraintCoincidence_33.setName("SketchConstraintCoincidence_39")
 193 SketchConstraintHorizontal_6 = Sketch_4.setHorizontal(SketchLine_34.result())
 194 SketchPoint_3 = Sketch_4.addPoint(model.selection("VERTEX", "PartSet/Origin"))
 195 SketchArc_5 = Sketch_4.addArc(0.0375959770412408, 0.09256566148573138, -8.5, 15.29705854077836, -4, 17.05620228544792, True)
 196 SketchArc_5.setName("SketchArc_4")
 197 SketchArc_5.result().setName("SketchArc_4")
 198 SketchArc_5.results()[1].setName("SketchArc_4_2")
 199 SketchArc_5.setAuxiliary(True)
 200 SketchConstraintCoincidence_34 = Sketch_4.setCoincident(SketchLine_22.startPoint(), SketchArc_5.startPoint())
 201 SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_41")
 202 SketchArc_6 = Sketch_4.addArc(-0.08847833993497614, -0.2092058473187996, 4, 17.03870823911452, 8.5, 15.29705854077835, True)
 203 SketchArc_6.setName("SketchArc_5")
 204 SketchArc_6.result().setName("SketchArc_5")
 205 SketchArc_6.results()[1].setName("SketchArc_5_2")
 206 SketchArc_6.setAuxiliary(True)
 207 SketchConstraintCoincidence_35 = Sketch_4.setCoincident(SketchLine_25.endPoint(), SketchArc_6.endPoint())
 208 SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_42")
 209 SketchPoint_4 = Sketch_4.addPoint(-4, 17.05620228544792)
 210 SketchPoint_5 = Sketch_4.addPoint(4, 17.03870823911452)
 211 SketchConstraintCoincidence_36 = Sketch_4.setCoincident(SketchArc_5.endPoint(), SketchPoint_4.coordinates())
 212 SketchConstraintCoincidence_36.setName("SketchConstraintCoincidence_46")
 213 SketchConstraintCoincidence_37 = Sketch_4.setCoincident(SketchArc_6.startPoint(), SketchPoint_5.coordinates())
 214 SketchConstraintCoincidence_37.setName("SketchConstraintCoincidence_48")
 215 SketchConstraintCoincidence_38 = Sketch_4.setCoincident(SketchArc_5.endPoint(), SketchLine_32.endPoint())
 216 SketchConstraintCoincidence_38.setName("SketchConstraintCoincidence_40")
 217 SketchConstraintCoincidence_39 = Sketch_4.setCoincident(SketchPoint_5.coordinates(), SketchLine_26.startPoint())
 218 SketchConstraintCoincidence_39.setName("SketchConstraintCoincidence_43")
 219 SketchArc_7 = Sketch_4.addArc(-10, 21.27189688984679, -7.430380313394083, 15.84999181264236, -4, 21.27189364217905, False)
 220 SketchConstraintCoincidence_40 = Sketch_4.setCoincident(SketchArc_7.startPoint(), SketchArc_3.endPoint())
 221 SketchConstraintCoincidence_40.setName("SketchConstraintCoincidence_44")
 222 SketchLine_35 = Sketch_4.addLine(-4, 44.00000000000001, -4, 21.27189364217905)
 223 SketchLine_35.setName("SketchLine_34")
 224 SketchLine_35.result().setName("SketchLine_34")
 225 SketchLine_35.setAuxiliary(True)
 226 SketchConstraintCoincidence_41 = Sketch_4.setCoincident(SketchArc_7.endPoint(), SketchLine_35.endPoint())
 227 SketchConstraintCoincidence_41.setName("SketchConstraintCoincidence_45")
 228 SketchConstraintTangent_5 = Sketch_4.setTangent(SketchArc_7.results()[1], SketchLine_35.result())
 229 SketchConstraintTangent_6 = Sketch_4.setTangent(SketchArc_7.results()[1], SketchArc_3.results()[1])
 230 SketchConstraintCoincidence_42 = Sketch_4.setCoincident(SketchLine_32.startPoint(), SketchLine_35.startPoint())
 231 SketchConstraintCoincidence_42.setName("SketchConstraintCoincidence_47")
 232 SketchConstraintCoincidence_43 = Sketch_4.setCoincident(SketchArc_5.startPoint(), SketchArc_3.startPoint())
 233 SketchConstraintCoincidence_43.setName("SketchConstraintCoincidence_49")
 234 SketchConstraintTangent_7 = Sketch_4.setTangent(SketchArc_5.results()[1], SketchArc_3.results()[1])
 235 SketchConstraintCoincidence_44 = Sketch_4.setCoincident(SketchLine_35.endPoint(), SketchLine_32.result())
 236 SketchConstraintCoincidence_44.setName("SketchConstraintCoincidence_50")
 237 SketchConstraintCoincidence_45 = Sketch_4.setCoincident(SketchArc_3.endPoint(), SketchArc_5.results()[1])
 238 SketchConstraintCoincidence_45.setName("SketchConstraintCoincidence_51")
 239 SketchArc_8 = Sketch_4.addArc(10, 21.26494485199291, 4, 21.26494484096588, 7.448738798736517, 15.83437708398516, False)
 240 SketchArc_8.setName("SketchArc_9")
 241 SketchArc_8.result().setName("SketchArc_9")
 242 SketchArc_8.results()[1].setName("SketchArc_9_2")
 243 SketchLine_36 = Sketch_4.addLine(4, 21.26494484096588, 4, 44.00000000000001)
 244 SketchLine_36.setName("SketchLine_35")
 245 SketchLine_36.result().setName("SketchLine_35")
 246 SketchLine_36.setAuxiliary(True)
 247 SketchConstraintCoincidence_46 = Sketch_4.setCoincident(SketchArc_8.startPoint(), SketchLine_36.startPoint())
 248 SketchConstraintCoincidence_46.setName("SketchConstraintCoincidence_52")
 249 SketchConstraintCoincidence_47 = Sketch_4.setCoincident(SketchArc_8.endPoint(), SketchArc_4.startPoint())
 250 SketchConstraintCoincidence_47.setName("SketchConstraintCoincidence_53")
 251 SketchConstraintTangent_8 = Sketch_4.setTangent(SketchArc_8.results()[1], SketchArc_4.results()[1])
 252 SketchConstraintTangent_9 = Sketch_4.setTangent(SketchArc_8.results()[1], SketchLine_36.result())
 253 SketchConstraintCoincidence_48 = Sketch_4.setCoincident(SketchArc_6.endPoint(), SketchArc_4.endPoint())
 254 SketchConstraintCoincidence_48.setName("SketchConstraintCoincidence_54")
 255 SketchConstraintCoincidence_49 = Sketch_4.setCoincident(SketchLine_26.endPoint(), SketchLine_36.endPoint())
 256 SketchConstraintCoincidence_49.setName("SketchConstraintCoincidence_55")
 257 SketchConstraintTangent_10 = Sketch_4.setTangent(SketchArc_6.results()[1], SketchArc_4.results()[1])
 258 SketchConstraintCoincidence_50 = Sketch_4.setCoincident(SketchArc_4.startPoint(), SketchArc_6.results()[1])
 259 SketchConstraintCoincidence_50.setName("SketchConstraintCoincidence_56")
 260 SketchConstraintCoincidence_51 = Sketch_4.setCoincident(SketchLine_36.startPoint(), SketchLine_26.result())
 261 SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_57")
 262 SketchConstraintCoincidence_52 = Sketch_4.setCoincident(SketchLine_25.startPoint(), SketchLine_34.endPoint())
 263 SketchConstraintCoincidence_52.setName("SketchConstraintCoincidence_58")
 264 SketchCircle_3 = Sketch_4.addCircle(model.selection("EDGE", "Sketch_2/Edge-SketchCircle_1_2"))
 265 SketchConstraintCoincidence_53 = Sketch_4.setCoincident(SketchLine_22.startPoint(), SketchCircle_3.results()[1])
 266 SketchConstraintCoincidence_53.setName("SketchConstraintCoincidence_59")
 267 SketchConstraintCoincidence_54 = Sketch_4.setCoincident(SketchArc_4.endPoint(), SketchCircle_3.results()[1])
 268 SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_60")
 269 SketchConstraintRadius_5 = Sketch_4.setRadius(SketchArc_7.results()[1], 6)
 270 SketchConstraintRadius_6 = Sketch_4.setRadius(SketchArc_8.results()[1], 6)
 271 SketchConstraintDistance_11 = Sketch_4.setDistance(SketchLine_25.endPoint(), SketchLine_36.result(), 4.5)
 272 SketchConstraintDistance_12 = Sketch_4.setDistance(SketchArc_8.startPoint(), SketchLine_33.result(), 4)
 273 SketchConstraintDistance_13 = Sketch_4.setDistance(SketchArc_7.endPoint(), SketchLine_33.result(), 4)
 274 SketchConstraintDistance_13.setName("SketchConstraintDistance_14")
 275 SketchArc_9 = Sketch_4.addArc(-10, 37.99999999999999, -4, 37.99998118249049, -9.999976547916727, 44, False)
 276 SketchArc_9.setName("SketchArc_10")
 277 SketchArc_9.result().setName("SketchArc_10")
 278 SketchArc_9.results()[1].setName("SketchArc_10_2")
 279 SketchConstraintCoincidence_55 = Sketch_4.setCoincident(SketchArc_9.startPoint(), SketchLine_20.startPoint())
 280 SketchConstraintCoincidence_55.setName("SketchConstraintCoincidence_61")
 281 SketchConstraintCoincidence_56 = Sketch_4.setCoincident(SketchArc_9.endPoint(), SketchLine_23.endPoint())
 282 SketchConstraintCoincidence_56.setName("SketchConstraintCoincidence_62")
 283 SketchConstraintTangent_11 = Sketch_4.setTangent(SketchArc_9.results()[1], SketchLine_20.result())
 284 SketchConstraintTangent_12 = Sketch_4.setTangent(SketchArc_9.results()[1], SketchLine_23.result())
 285 SketchConstraintCoincidence_57 = Sketch_4.setCoincident(SketchLine_35.endPoint(), SketchLine_20.endPoint())
 286 SketchConstraintCoincidence_57.setName("SketchConstraintCoincidence_63")
 287 SketchConstraintCoincidence_58 = Sketch_4.setCoincident(SketchLine_31.startPoint(), SketchLine_23.startPoint())
 288 SketchConstraintCoincidence_58.setName("SketchConstraintCoincidence_64")
 289 SketchConstraintCoincidence_59 = Sketch_4.setCoincident(SketchLine_20.startPoint(), SketchLine_35.result())
 290 SketchConstraintCoincidence_59.setName("SketchConstraintCoincidence_65")
 291 SketchConstraintCoincidence_60 = Sketch_4.setCoincident(SketchLine_23.endPoint(), SketchLine_31.result())
 292 SketchConstraintCoincidence_60.setName("SketchConstraintCoincidence_66")
 293 SketchArc_10 = Sketch_4.addArc(10, 37.99999999999996, 9.999996841999446, 44, 4, 37.99999998819019, False)
 294 SketchArc_10.setName("SketchArc_11")
 295 SketchArc_10.result().setName("SketchArc_11")
 296 SketchArc_10.results()[1].setName("SketchArc_11_2")
 297 SketchConstraintCoincidence_61 = Sketch_4.setCoincident(SketchArc_10.startPoint(), SketchLine_24.startPoint())
 298 SketchConstraintCoincidence_61.setName("SketchConstraintCoincidence_67")
 299 SketchConstraintCoincidence_62 = Sketch_4.setCoincident(SketchArc_10.endPoint(), SketchLine_21.endPoint())
 300 SketchConstraintCoincidence_62.setName("SketchConstraintCoincidence_68")
 301 SketchConstraintTangent_13 = Sketch_4.setTangent(SketchArc_10.results()[1], SketchLine_21.result())
 302 SketchConstraintTangent_14 = Sketch_4.setTangent(SketchArc_10.results()[1], SketchLine_24.result())
 303 SketchConstraintCoincidence_63 = Sketch_4.setCoincident(SketchLine_36.startPoint(), SketchLine_21.startPoint())
 304 SketchConstraintCoincidence_63.setName("SketchConstraintCoincidence_69")
 305 SketchConstraintCoincidence_64 = Sketch_4.setCoincident(SketchLine_27.endPoint(), SketchLine_24.endPoint())
 306 SketchConstraintCoincidence_64.setName("SketchConstraintCoincidence_70")
 307 SketchConstraintCoincidence_65 = Sketch_4.setCoincident(SketchLine_21.endPoint(), SketchLine_36.result())
 308 SketchConstraintCoincidence_65.setName("SketchConstraintCoincidence_71")
 309 SketchConstraintCoincidence_66 = Sketch_4.setCoincident(SketchLine_24.startPoint(), SketchLine_27.result())
 310 SketchConstraintCoincidence_66.setName("SketchConstraintCoincidence_72")
 311 SketchConstraintRadius_7 = Sketch_4.setRadius(SketchArc_9.results()[1], 6)
 312 SketchConstraintRadius_8 = Sketch_4.setRadius(SketchArc_10.results()[1], 6)
 313 SketchConstraintDistance_14 = Sketch_4.setDistance(SketchLine_23.startPoint(), SketchLine_29.result(), 1)
 314 SketchConstraintDistance_14.setName("SketchConstraintDistance_15")
 315 SketchConstraintDistance_15 = Sketch_4.setDistance(SketchLine_24.endPoint(), SketchLine_29.result(), 1)
 316 SketchConstraintDistance_15.setName("SketchConstraintDistance_16")
 317 SketchLine_37 = Sketch_4.addLine(model.selection("EDGE", "PartSet/OX"))
 318 SketchLine_37.setName("SketchLine_40")
 319 SketchLine_37.result().setName("SketchLine_40")
 320 SketchConstraintDistance_16 = Sketch_4.setDistance(SketchArc_10.startPoint(), SketchLine_37.result(), 44)
 321 SketchConstraintDistance_16.setName("SketchConstraintDistance_17")
 322 SketchConstraintDistance_17 = Sketch_4.setDistance(SketchLine_21.result(), SketchLine_24.endPoint(), 6.1)
 323 SketchConstraintDistance_17.setName("SketchConstraintDistance_18")
 324 SketchConstraintDistance_18 = Sketch_4.setDistance(SketchLine_30.endPoint(), SketchLine_20.result(), 6.1)
 325 SketchConstraintDistance_18.setName("SketchConstraintDistance_19")
 326 model.do()
 327 Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), 50, 30)
 328 Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 22, 22)
 329 Boolean_2 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1")], [model.selection("SOLID", "Extrusion_4_1")])
 330 Extrusion_5 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 22, 22)
 331 Extrusion_6 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_2_2f")], model.selection(), 75, 40)
 332 Boolean_3 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_6_1")], [model.selection("SOLID", "Extrusion_5_1")])
 333 Sketch_5 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
 334 SketchLine_38 = Sketch_5.addLine(44, 3.464101615137769, 17.52573586555855, 49.31887218898888)
 335 SketchLine_38.setName("SketchLine_41")
 336 SketchLine_38.result().setName("SketchLine_41")
 337 SketchPoint_6 = Sketch_5.addPoint(model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_5s-SketchLine_4e"))
 338 SketchConstraintCoincidence_67 = Sketch_5.setCoincident(SketchLine_38.startPoint(), SketchPoint_6.result())
 339 SketchConstraintCoincidence_67.setName("SketchConstraintCoincidence_73")
 340 SketchLine_39 = Sketch_5.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"))
 341 SketchLine_39.setName("SketchLine_42")
 342 SketchLine_39.result().setName("SketchLine_42")
 343 SketchConstraintPerpendicular_2 = Sketch_5.setPerpendicular(SketchLine_38.result(), SketchLine_39.result())
 344 model.do()
 345 Axis_4 = model.addAxis(Part_1_doc, model.selection("FACE", "Sketch_1/Face-SketchLine_10r-SketchLine_11r-SketchLine_8r-SketchLine_3r-SketchLine_9r-SketchLine_6r-SketchArc_1_2r-SketchArc_2_2f"), model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_5s-SketchLine_4e"))
 346 Plane_4 = model.addPlane(Part_1_doc, model.selection("EDGE", "Axis_1"), model.selection("VERTEX", "Sketch_5/Vertex-SketchLine_41e"), False)
 347 Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
 348 SketchLine_40 = Sketch_6.addLine(4, 12.99999833620712, 4, 12.89999999999998)
 349 SketchLine_40.setName("SketchLine_55")
 350 SketchLine_40.result().setName("SketchLine_55")
 351 SketchLine_41 = Sketch_6.addLine(4, 12.89999999999998, -4, 12.89999999999998)
 352 SketchLine_41.setName("SketchLine_44")
 353 SketchLine_41.result().setName("SketchLine_44")
 354 SketchLine_42 = Sketch_6.addLine(4, 18.99999999999998, 4, 12.89999999999998)
 355 SketchLine_42.setName("SketchLine_43")
 356 SketchLine_42.result().setName("SketchLine_43")
 357 SketchLine_42.setAuxiliary(True)
 358 SketchConstraintCoincidence_68 = Sketch_6.setCoincident(SketchLine_42.endPoint(), SketchLine_41.startPoint())
 359 SketchConstraintCoincidence_68.setName("SketchConstraintCoincidence_74")
 360 SketchLine_43 = Sketch_6.addLine(-4, 12.89999999999998, -4, 13.0000014806823)
 361 SketchLine_43.setName("SketchLine_52")
 362 SketchLine_43.result().setName("SketchLine_52")
 363 SketchLine_44 = Sketch_6.addLine(-9.999992772985484, 18.99999999999998, -10.09999999999998, 18.99999999999998)
 364 SketchLine_44.setName("SketchLine_53")
 365 SketchLine_44.result().setName("SketchLine_53")
 366 SketchLine_45 = Sketch_6.addLine(-4, 12.89999999999998, -4, 18.99999999999998)
 367 SketchLine_45.setAuxiliary(True)
 368 SketchConstraintCoincidence_69 = Sketch_6.setCoincident(SketchLine_41.endPoint(), SketchLine_45.startPoint())
 369 SketchConstraintCoincidence_69.setName("SketchConstraintCoincidence_75")
 370 SketchLine_46 = Sketch_6.addLine(10.10000000000002, 18.99999999999998, 10.00002047508484, 18.99999999999998)
 371 SketchLine_46.setName("SketchLine_54")
 372 SketchLine_46.result().setName("SketchLine_54")
 373 SketchLine_47 = Sketch_6.addLine(-4, 18.99999999999998, -10.09999999999998, 18.99999999999998)
 374 SketchLine_47.setName("SketchLine_46")
 375 SketchLine_47.result().setName("SketchLine_46")
 376 SketchLine_47.setAuxiliary(True)
 377 SketchConstraintCoincidence_70 = Sketch_6.setCoincident(SketchLine_45.endPoint(), SketchLine_47.startPoint())
 378 SketchConstraintCoincidence_70.setName("SketchConstraintCoincidence_76")
 379 SketchLine_48 = Sketch_6.addLine(-10.09999999999998, 18.99999999999998, -10.09999999999998, 19.79999999999998)
 380 SketchLine_48.setName("SketchLine_47")
 381 SketchLine_48.result().setName("SketchLine_47")
 382 SketchConstraintCoincidence_71 = Sketch_6.setCoincident(SketchLine_47.endPoint(), SketchLine_48.startPoint())
 383 SketchConstraintCoincidence_71.setName("SketchConstraintCoincidence_77")
 384 SketchLine_49 = Sketch_6.addLine(-10.09999999999998, 19.79999999999998, 10.09999999999999, 19.79999999999998)
 385 SketchLine_49.setName("SketchLine_48")
 386 SketchLine_49.result().setName("SketchLine_48")
 387 SketchConstraintCoincidence_72 = Sketch_6.setCoincident(SketchLine_48.endPoint(), SketchLine_49.startPoint())
 388 SketchConstraintCoincidence_72.setName("SketchConstraintCoincidence_78")
 389 SketchLine_50 = Sketch_6.addLine(10.09999999999999, 19.79999999999998, 10.10000000000002, 18.99999999999998)
 390 SketchLine_50.setName("SketchLine_49")
 391 SketchLine_50.result().setName("SketchLine_49")
 392 SketchConstraintCoincidence_73 = Sketch_6.setCoincident(SketchLine_49.endPoint(), SketchLine_50.startPoint())
 393 SketchConstraintCoincidence_73.setName("SketchConstraintCoincidence_79")
 394 SketchLine_51 = Sketch_6.addLine(10.10000000000002, 18.99999999999998, 4, 18.99999999999998)
 395 SketchLine_51.setName("SketchLine_50")
 396 SketchLine_51.result().setName("SketchLine_50")
 397 SketchLine_51.setAuxiliary(True)
 398 SketchConstraintCoincidence_74 = Sketch_6.setCoincident(SketchLine_50.endPoint(), SketchLine_51.startPoint())
 399 SketchConstraintCoincidence_74.setName("SketchConstraintCoincidence_80")
 400 SketchConstraintCoincidence_75 = Sketch_6.setCoincident(SketchLine_42.startPoint(), SketchLine_51.endPoint())
 401 SketchConstraintCoincidence_75.setName("SketchConstraintCoincidence_81")
 402 SketchConstraintVertical_11 = Sketch_6.setVertical(SketchLine_45.result())
 403 SketchConstraintVertical_12 = Sketch_6.setVertical(SketchLine_42.result())
 404 SketchConstraintHorizontal_7 = Sketch_6.setHorizontal(SketchLine_41.result())
 405 SketchConstraintHorizontal_8 = Sketch_6.setHorizontal(SketchLine_47.result())
 406 SketchConstraintHorizontal_9 = Sketch_6.setHorizontal(SketchLine_51.result())
 407 SketchConstraintHorizontal_10 = Sketch_6.setHorizontal(SketchLine_49.result())
 408 SketchConstraintVertical_13 = Sketch_6.setVertical(SketchLine_50.result())
 409 SketchConstraintDistance_19 = Sketch_6.setDistance(SketchLine_48.startPoint(), SketchLine_49.result(), 0.8)
 410 SketchConstraintDistance_19.setName("SketchConstraintDistance_20")
 411 SketchConstraintDistance_20 = Sketch_6.setDistance(SketchLine_51.startPoint(), SketchLine_49.result(), 0.8)
 412 SketchConstraintDistance_20.setName("SketchConstraintDistance_21")
 413 SketchLine_52 = Sketch_6.addLine(model.selection("EDGE", "Sketch_5/Edge-SketchLine_41"))
 414 SketchLine_52.setName("SketchLine_51")
 415 SketchLine_52.result().setName("SketchLine_51")
 416 SketchConstraintDistance_21 = Sketch_6.setDistance(SketchLine_45.startPoint(), SketchLine_52.result(), 4)
 417 SketchConstraintDistance_21.setName("SketchConstraintDistance_22")
 418 SketchConstraintDistance_22 = Sketch_6.setDistance(SketchLine_42.endPoint(), SketchLine_52.result(), 4)
 419 SketchConstraintDistance_22.setName("SketchConstraintDistance_23")
 420 SketchArc_11 = Sketch_6.addArc(-10, 12.99999999999983, -4, 13.0000014806823, -9.999992772985484, 18.99999999999998, False)
 421 SketchArc_11.setName("SketchArc_12")
 422 SketchArc_11.result().setName("SketchArc_12")
 423 SketchArc_11.results()[1].setName("SketchArc_12_2")
 424 SketchConstraintCoincidence_76 = Sketch_6.setCoincident(SketchArc_11.startPoint(), SketchLine_43.endPoint())
 425 SketchConstraintCoincidence_76.setName("SketchConstraintCoincidence_82")
 426 SketchConstraintCoincidence_77 = Sketch_6.setCoincident(SketchArc_11.endPoint(), SketchLine_44.startPoint())
 427 SketchConstraintCoincidence_77.setName("SketchConstraintCoincidence_83")
 428 SketchConstraintTangent_15 = Sketch_6.setTangent(SketchArc_11.results()[1], SketchLine_43.result())
 429 SketchConstraintTangent_16 = Sketch_6.setTangent(SketchArc_11.results()[1], SketchLine_44.result())
 430 SketchConstraintCoincidence_78 = Sketch_6.setCoincident(SketchLine_45.startPoint(), SketchLine_43.startPoint())
 431 SketchConstraintCoincidence_78.setName("SketchConstraintCoincidence_84")
 432 SketchConstraintCoincidence_79 = Sketch_6.setCoincident(SketchLine_47.endPoint(), SketchLine_44.endPoint())
 433 SketchConstraintCoincidence_79.setName("SketchConstraintCoincidence_85")
 434 SketchConstraintCoincidence_80 = Sketch_6.setCoincident(SketchLine_43.endPoint(), SketchLine_45.result())
 435 SketchConstraintCoincidence_80.setName("SketchConstraintCoincidence_86")
 436 SketchConstraintCoincidence_81 = Sketch_6.setCoincident(SketchLine_44.startPoint(), SketchLine_47.result())
 437 SketchConstraintCoincidence_81.setName("SketchConstraintCoincidence_87")
 438 SketchArc_12 = Sketch_6.addArc(10.00000000000004, 12.99999999999978, 10.00002047508484, 18.99999999999998, 4, 12.99999833620712, False)
 439 SketchArc_12.setName("SketchArc_13")
 440 SketchArc_12.result().setName("SketchArc_13")
 441 SketchArc_12.results()[1].setName("SketchArc_13_2")
 442 SketchConstraintCoincidence_82 = Sketch_6.setCoincident(SketchArc_12.startPoint(), SketchLine_46.endPoint())
 443 SketchConstraintCoincidence_82.setName("SketchConstraintCoincidence_88")
 444 SketchConstraintCoincidence_83 = Sketch_6.setCoincident(SketchArc_12.endPoint(), SketchLine_40.startPoint())
 445 SketchConstraintCoincidence_83.setName("SketchConstraintCoincidence_89")
 446 SketchConstraintTangent_17 = Sketch_6.setTangent(SketchArc_12.results()[1], SketchLine_46.result())
 447 SketchConstraintTangent_18 = Sketch_6.setTangent(SketchArc_12.results()[1], SketchLine_40.result())
 448 SketchConstraintCoincidence_84 = Sketch_6.setCoincident(SketchLine_51.startPoint(), SketchLine_46.startPoint())
 449 SketchConstraintCoincidence_84.setName("SketchConstraintCoincidence_90")
 450 SketchConstraintCoincidence_85 = Sketch_6.setCoincident(SketchLine_42.endPoint(), SketchLine_40.endPoint())
 451 SketchConstraintCoincidence_85.setName("SketchConstraintCoincidence_91")
 452 SketchConstraintCoincidence_86 = Sketch_6.setCoincident(SketchLine_46.endPoint(), SketchLine_51.result())
 453 SketchConstraintCoincidence_86.setName("SketchConstraintCoincidence_92")
 454 SketchConstraintCoincidence_87 = Sketch_6.setCoincident(SketchLine_40.startPoint(), SketchLine_42.result())
 455 SketchConstraintCoincidence_87.setName("SketchConstraintCoincidence_93")
 456 SketchConstraintRadius_9 = Sketch_6.setRadius(SketchArc_11.results()[1], 6)
 457 SketchConstraintRadius_10 = Sketch_6.setRadius(SketchArc_12.results()[1], 6)
 458 SketchConstraintDistance_23 = Sketch_6.setDistance(SketchLine_40.result(), SketchLine_46.startPoint(), 6.1)
 459 SketchConstraintDistance_23.setName("SketchConstraintDistance_24")
 460 SketchConstraintDistance_24 = Sketch_6.setDistance(SketchLine_48.startPoint(), SketchLine_43.result(), 6.1)
 461 SketchConstraintDistance_24.setName("SketchConstraintDistance_25")
 462 SketchConstraintVertical_14 = Sketch_6.setVertical(SketchLine_48.result())
 463 SketchConstraintDistance_25 = Sketch_6.setDistance(SketchLine_41.result(), SketchArc_12.startPoint(), 6.1)
 464 SketchConstraintDistance_25.setName("SketchConstraintDistance_26")
 465 SketchLine_53 = Sketch_6.addLine(model.selection("EDGE", "Axis_1"))
 466 SketchLine_53.setName("SketchLine_56")
 467 SketchLine_53.result().setName("SketchLine_56")
 468 SketchConstraintCoincidence_88 = Sketch_6.setCoincident(SketchArc_12.startPoint(), SketchLine_53.result())
 469 SketchConstraintCoincidence_88.setName("SketchConstraintCoincidence_94")
 470 model.do()
 471 Extrusion_7 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchLine_55r-SketchLine_44r-SketchLine_52r-SketchLine_53r-SketchLine_54r-SketchLine_47r-SketchLine_48r-SketchLine_49r-SketchArc_12_2r-SketchArc_13_2r")], model.selection(), 0, 40)
 472 Boolean_4 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Boolean_1_1")], [model.selection("SOLID", "Boolean_2_1")])
 473 Boolean_5 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Boolean_4_1")], [model.selection("SOLID", "Extrusion_7_1")])
 474 Boolean_6 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_5_1")], [model.selection("SOLID", "Boolean_3_1")])
 475 Extrusion_8 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_10r-SketchLine_11r-SketchLine_8r-SketchLine_3r-SketchLine_9r-SketchLine_6r-SketchArc_1_2r-SketchArc_2_2f")], model.selection(), 55, 55)
 476 Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face_7"))
 477 SketchLine_54 = Sketch_7.addLine(55, -9.237629881196027, 55, -60.00000049730294)
 478 SketchLine_54.setName("SketchLine_66")
 479 SketchLine_54.result().setName("SketchLine_66")
 480 SketchPoint_7 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_7&Extrusion_8_1/Generated_Face_6&Extrusion_8_1/To_Face_1"))
 481 SketchLine_55 = Sketch_7.addLine(55, -9.237629881196027, 55, -70)
 482 SketchLine_55.setName("SketchLine_57")
 483 SketchLine_55.result().setName("SketchLine_57")
 484 SketchLine_55.setAuxiliary(True)
 485 SketchConstraintCoincidence_89 = Sketch_7.setCoincident(SketchLine_55.startPoint(), SketchPoint_7.result())
 486 SketchConstraintCoincidence_89.setName("SketchConstraintCoincidence_95")
 487 SketchPoint_8 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_8&Extrusion_8_1/Generated_Face_7&Extrusion_8_1/To_Face_1"))
 488 SketchConstraintCoincidence_90 = Sketch_7.setCoincident(SketchLine_55.endPoint(), SketchPoint_8.result())
 489 SketchConstraintCoincidence_90.setName("SketchConstraintCoincidence_96")
 490 SketchLine_56 = Sketch_7.addLine(45.00000744821924, -70, -45.00000429345155, -70)
 491 SketchLine_56.setName("SketchLine_67")
 492 SketchLine_56.result().setName("SketchLine_67")
 493 SketchLine_57 = Sketch_7.addLine(55, -70, -55, -70)
 494 SketchLine_57.setName("SketchLine_58")
 495 SketchLine_57.result().setName("SketchLine_58")
 496 SketchLine_57.setAuxiliary(True)
 497 SketchConstraintCoincidence_91 = Sketch_7.setCoincident(SketchLine_55.endPoint(), SketchLine_57.startPoint())
 498 SketchConstraintCoincidence_91.setName("SketchConstraintCoincidence_97")
 499 SketchPoint_9 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_8&Extrusion_8_1/Generated_Face_7&Extrusion_8_1/From_Face_1"))
 500 SketchConstraintCoincidence_92 = Sketch_7.setCoincident(SketchLine_57.endPoint(), SketchPoint_9.result())
 501 SketchConstraintCoincidence_92.setName("SketchConstraintCoincidence_98")
 502 SketchLine_58 = Sketch_7.addLine(-55, -60.00001819955111, -55, -9.237629881196027)
 503 SketchLine_58.setName("SketchLine_68")
 504 SketchLine_58.result().setName("SketchLine_68")
 505 SketchLine_59 = Sketch_7.addLine(-55, -70, -55, -9.237629881196027)
 506 SketchLine_59.setAuxiliary(True)
 507 SketchConstraintCoincidence_93 = Sketch_7.setCoincident(SketchLine_57.endPoint(), SketchLine_59.startPoint())
 508 SketchConstraintCoincidence_93.setName("SketchConstraintCoincidence_99")
 509 SketchPoint_10 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_7&Extrusion_8_1/Generated_Face_6&Extrusion_8_1/From_Face_1"))
 510 SketchConstraintCoincidence_94 = Sketch_7.setCoincident(SketchLine_59.endPoint(), SketchPoint_10.result())
 511 SketchConstraintCoincidence_94.setName("SketchConstraintCoincidence_100")
 512 SketchLine_60 = Sketch_7.addLine(-55, -9.237629881196027, -61.32702426187202, -9.237629881196027)
 513 SketchConstraintCoincidence_95 = Sketch_7.setCoincident(SketchLine_59.endPoint(), SketchLine_60.startPoint())
 514 SketchConstraintCoincidence_95.setName("SketchConstraintCoincidence_101")
 515 SketchLine_61 = Sketch_7.addLine(-61.32702426187202, -9.237629881196027, -61.32702426187202, -75.68652656141983)
 516 SketchConstraintCoincidence_96 = Sketch_7.setCoincident(SketchLine_60.endPoint(), SketchLine_61.startPoint())
 517 SketchConstraintCoincidence_96.setName("SketchConstraintCoincidence_102")
 518 SketchLine_62 = Sketch_7.addLine(-61.32702426187202, -75.68652656141983, 60.38641987912783, -75.68652656141983)
 519 SketchConstraintCoincidence_97 = Sketch_7.setCoincident(SketchLine_61.endPoint(), SketchLine_62.startPoint())
 520 SketchConstraintCoincidence_97.setName("SketchConstraintCoincidence_103")
 521 SketchLine_63 = Sketch_7.addLine(60.38641987912783, -75.68652656141983, 60.38641987912783, -9.237629881196027)
 522 SketchConstraintCoincidence_98 = Sketch_7.setCoincident(SketchLine_62.endPoint(), SketchLine_63.startPoint())
 523 SketchConstraintCoincidence_98.setName("SketchConstraintCoincidence_104")
 524 SketchLine_64 = Sketch_7.addLine(60.38641987912783, -9.237629881196027, 55, -9.237629881196027)
 525 SketchConstraintCoincidence_99 = Sketch_7.setCoincident(SketchLine_63.endPoint(), SketchLine_64.startPoint())
 526 SketchConstraintCoincidence_99.setName("SketchConstraintCoincidence_105")
 527 SketchConstraintCoincidence_100 = Sketch_7.setCoincident(SketchLine_55.startPoint(), SketchLine_64.endPoint())
 528 SketchConstraintCoincidence_100.setName("SketchConstraintCoincidence_106")
 529 SketchConstraintCoincidence_101 = Sketch_7.setCoincident(SketchPoint_7.coordinates(), SketchLine_64.endPoint())
 530 SketchConstraintCoincidence_101.setName("SketchConstraintCoincidence_107")
 531 SketchConstraintHorizontal_11 = Sketch_7.setHorizontal(SketchLine_64.result())
 532 SketchConstraintHorizontal_12 = Sketch_7.setHorizontal(SketchLine_60.result())
 533 SketchConstraintHorizontal_13 = Sketch_7.setHorizontal(SketchLine_62.result())
 534 SketchConstraintVertical_15 = Sketch_7.setVertical(SketchLine_61.result())
 535 SketchConstraintVertical_16 = Sketch_7.setVertical(SketchLine_63.result())
 536 SketchArc_13 = Sketch_7.addArc(45, -60, 45.00000744821924, -70, 55, -60.00000049730294, False)
 537 SketchArc_13.setName("SketchArc_14")
 538 SketchArc_13.result().setName("SketchArc_14")
 539 SketchArc_13.results()[1].setName("SketchArc_14_2")
 540 SketchLine_65 = Sketch_7.addLine(45.00000744821924, -70, -55, -70)
 541 SketchLine_65.setAuxiliary(True)
 542 SketchConstraintCoincidence_102 = Sketch_7.setCoincident(SketchArc_13.startPoint(), SketchLine_65.startPoint())
 543 SketchConstraintCoincidence_102.setName("SketchConstraintCoincidence_108")
 544 SketchConstraintCoincidence_103 = Sketch_7.setCoincident(SketchArc_13.endPoint(), SketchLine_54.endPoint())
 545 SketchConstraintCoincidence_103.setName("SketchConstraintCoincidence_109")
 546 SketchConstraintTangent_19 = Sketch_7.setTangent(SketchArc_13.results()[1], SketchLine_65.result())
 547 SketchConstraintTangent_20 = Sketch_7.setTangent(SketchArc_13.results()[1], SketchLine_54.result())
 548 SketchConstraintCoincidence_104 = Sketch_7.setCoincident(SketchLine_57.endPoint(), SketchLine_65.endPoint())
 549 SketchConstraintCoincidence_104.setName("SketchConstraintCoincidence_110")
 550 SketchConstraintCoincidence_105 = Sketch_7.setCoincident(SketchLine_55.startPoint(), SketchLine_54.startPoint())
 551 SketchConstraintCoincidence_105.setName("SketchConstraintCoincidence_111")
 552 SketchConstraintCoincidence_106 = Sketch_7.setCoincident(SketchLine_65.startPoint(), SketchLine_57.result())
 553 SketchConstraintCoincidence_106.setName("SketchConstraintCoincidence_112")
 554 SketchConstraintCoincidence_107 = Sketch_7.setCoincident(SketchLine_54.endPoint(), SketchLine_55.result())
 555 SketchConstraintCoincidence_107.setName("SketchConstraintCoincidence_113")
 556 SketchArc_14 = Sketch_7.addArc(-45, -59.99999999999999, -55, -60.00001819955111, -45.00000429345155, -70, False)
 557 SketchArc_14.setName("SketchArc_15")
 558 SketchArc_14.result().setName("SketchArc_15")
 559 SketchArc_14.results()[1].setName("SketchArc_15_2")
 560 SketchConstraintCoincidence_108 = Sketch_7.setCoincident(SketchArc_14.startPoint(), SketchLine_58.startPoint())
 561 SketchConstraintCoincidence_108.setName("SketchConstraintCoincidence_114")
 562 SketchConstraintCoincidence_109 = Sketch_7.setCoincident(SketchArc_14.endPoint(), SketchLine_56.endPoint())
 563 SketchConstraintCoincidence_109.setName("SketchConstraintCoincidence_115")
 564 SketchConstraintTangent_21 = Sketch_7.setTangent(SketchArc_14.results()[1], SketchLine_56.result())
 565 SketchConstraintTangent_22 = Sketch_7.setTangent(SketchArc_14.results()[1], SketchLine_58.result())
 566 SketchConstraintCoincidence_110 = Sketch_7.setCoincident(SketchLine_65.startPoint(), SketchLine_56.startPoint())
 567 SketchConstraintCoincidence_110.setName("SketchConstraintCoincidence_116")
 568 SketchConstraintCoincidence_111 = Sketch_7.setCoincident(SketchLine_59.endPoint(), SketchLine_58.endPoint())
 569 SketchConstraintCoincidence_111.setName("SketchConstraintCoincidence_117")
 570 SketchConstraintCoincidence_112 = Sketch_7.setCoincident(SketchLine_56.endPoint(), SketchLine_65.result())
 571 SketchConstraintCoincidence_112.setName("SketchConstraintCoincidence_118")
 572 SketchConstraintCoincidence_113 = Sketch_7.setCoincident(SketchLine_58.startPoint(), SketchLine_59.result())
 573 SketchConstraintCoincidence_113.setName("SketchConstraintCoincidence_119")
 574 SketchConstraintRadius_11 = Sketch_7.setRadius(SketchArc_13.results()[1], 10)
 575 SketchConstraintRadius_12 = Sketch_7.setRadius(SketchArc_14.results()[1], 10)
 576 SketchCircle_4 = Sketch_7.addCircle(44, -59, 5)
 577 SketchCircle_5 = Sketch_7.addCircle(-43.99999999999999, -58.99999999999999, 5)
 578 SketchConstraintRadius_13 = Sketch_7.setRadius(SketchCircle_4.results()[1], 5)
 579 SketchConstraintRadius_14 = Sketch_7.setRadius(SketchCircle_5.results()[1], 5)
 580 SketchConstraintDistance_26 = Sketch_7.setDistance(SketchCircle_4.center(), SketchLine_56.result(), 11)
 581 SketchConstraintDistance_26.setName("SketchConstraintDistance_27")
 582 SketchConstraintDistance_27 = Sketch_7.setDistance(SketchCircle_4.center(), SketchLine_54.result(), 11)
 583 SketchConstraintDistance_27.setName("SketchConstraintDistance_28")
 584 SketchConstraintDistance_28 = Sketch_7.setDistance(SketchCircle_5.center(), SketchLine_56.result(), 11)
 585 SketchConstraintDistance_28.setName("SketchConstraintDistance_29")
 586 SketchConstraintDistance_29 = Sketch_7.setDistance(SketchCircle_5.center(), SketchLine_58.result(), 11)
 587 SketchConstraintDistance_29.setName("SketchConstraintDistance_30")
 588 SketchCircle_6 = Sketch_7.addCircle(44.00000000000001, -20.23762988119603, 5)
 589 SketchConstraintRadius_15 = Sketch_7.setRadius(SketchCircle_6.results()[1], 5)
 590 SketchCircle_7 = Sketch_7.addCircle(-44.00000000000001, -20.23762988119603, 5)
 591 SketchConstraintRadius_16 = Sketch_7.setRadius(SketchCircle_7.results()[1], 5)
 592 SketchConstraintDistance_30 = Sketch_7.setDistance(SketchCircle_6.center(), SketchLine_54.result(), 11)
 593 SketchConstraintDistance_30.setName("SketchConstraintDistance_31")
 594 SketchLine_66 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_8_1/Generated_Face_7&Extrusion_8_1/Generated_Face_6"))
 595 SketchLine_66.setName("SketchLine_69")
 596 SketchLine_66.result().setName("SketchLine_69")
 597 SketchConstraintDistance_31 = Sketch_7.setDistance(SketchCircle_6.center(), SketchLine_66.result(), 11)
 598 SketchConstraintDistance_31.setName("SketchConstraintDistance_32")
 599 SketchConstraintDistance_32 = Sketch_7.setDistance(SketchCircle_7.center(), SketchLine_58.result(), 11)
 600 SketchConstraintDistance_32.setName("SketchConstraintDistance_33")
 601 SketchConstraintDistance_33 = Sketch_7.setDistance(SketchCircle_7.center(), SketchLine_66.result(), 11)
 602 SketchConstraintDistance_33.setName("SketchConstraintDistance_34")
 603 model.do()
 604 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchLine_66f-SketchLine_67f-SketchLine_68f-SketchLine_60f-SketchLine_61f-SketchLine_62f-SketchLine_63f-SketchLine_64f-SketchArc_14_2r-SketchArc_15_2r"), model.selection("FACE", "Sketch_7/Face-SketchCircle_4_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_5_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_7_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_6_2f")], model.selection(), 0, 10, [model.selection("SOLID", "Extrusion_8_1")])
 605 Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face_5"))
 606 SketchLine_67 = Sketch_8.addLine(55, -34.06366086055925, 55, 66.69873256076872)
 607 SketchLine_67.setName("SketchLine_79")
 608 SketchLine_67.result().setName("SketchLine_79")
 609 SketchPoint_11 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_1&ExtrusionCut_1_1/Modfied_6&Extrusion_8_1/Generated_Face_5"))
 610 SketchLine_68 = Sketch_8.addLine(55, -34.06366086055925, 55, 76.69872981077803)
 611 SketchLine_68.setName("SketchLine_70")
 612 SketchLine_68.result().setName("SketchLine_70")
 613 SketchLine_68.setAuxiliary(True)
 614 SketchConstraintCoincidence_114 = Sketch_8.setCoincident(SketchLine_68.startPoint(), SketchPoint_11.result())
 615 SketchConstraintCoincidence_114.setName("SketchConstraintCoincidence_120")
 616 SketchPoint_12 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_1&Extrusion_8_1/Generated_Face_5&Extrusion_8_1/Generated_Face_4"))
 617 SketchConstraintCoincidence_115 = Sketch_8.setCoincident(SketchLine_68.endPoint(), SketchPoint_12.result())
 618 SketchConstraintCoincidence_115.setName("SketchConstraintCoincidence_121")
 619 SketchLine_69 = Sketch_8.addLine(45.00002965668516, 76.69872981077802, -45.00000043269755, 76.69872981077803)
 620 SketchLine_69.setName("SketchLine_80")
 621 SketchLine_69.result().setName("SketchLine_80")
 622 SketchLine_70 = Sketch_8.addLine(55, 76.69872981077803, -55, 76.69872981077803)
 623 SketchLine_70.setName("SketchLine_71")
 624 SketchLine_70.result().setName("SketchLine_71")
 625 SketchLine_70.setAuxiliary(True)
 626 SketchConstraintCoincidence_116 = Sketch_8.setCoincident(SketchLine_68.endPoint(), SketchLine_70.startPoint())
 627 SketchConstraintCoincidence_116.setName("SketchConstraintCoincidence_122")
 628 SketchPoint_13 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_3&Extrusion_8_1/Generated_Face_5&Extrusion_8_1/Generated_Face_4"))
 629 SketchConstraintCoincidence_117 = Sketch_8.setCoincident(SketchLine_70.endPoint(), SketchPoint_13.result())
 630 SketchConstraintCoincidence_117.setName("SketchConstraintCoincidence_123")
 631 SketchLine_71 = Sketch_8.addLine(-55, 66.69873008106598, -55, -34.06366086055925)
 632 SketchLine_71.setName("SketchLine_81")
 633 SketchLine_71.result().setName("SketchLine_81")
 634 SketchLine_72 = Sketch_8.addLine(-55, 76.69872981077803, -55, -34.06366086055925)
 635 SketchLine_72.setAuxiliary(True)
 636 SketchConstraintCoincidence_118 = Sketch_8.setCoincident(SketchLine_70.endPoint(), SketchLine_72.startPoint())
 637 SketchConstraintCoincidence_118.setName("SketchConstraintCoincidence_124")
 638 SketchPoint_14 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_3&ExtrusionCut_1_1/Modfied_6&Extrusion_8_1/Generated_Face_5"))
 639 SketchConstraintCoincidence_119 = Sketch_8.setCoincident(SketchLine_72.endPoint(), SketchPoint_14.result())
 640 SketchConstraintCoincidence_119.setName("SketchConstraintCoincidence_125")
 641 SketchLine_73 = Sketch_8.addLine(-55, -34.06366086055925, -63.63698496776804, -34.06366086055925)
 642 SketchConstraintCoincidence_120 = Sketch_8.setCoincident(SketchLine_72.endPoint(), SketchLine_73.startPoint())
 643 SketchConstraintCoincidence_120.setName("SketchConstraintCoincidence_126")
 644 SketchLine_74 = Sketch_8.addLine(-63.63698496776804, -34.06366086055925, -63.63698496776804, 83.16226073446268)
 645 SketchConstraintCoincidence_121 = Sketch_8.setCoincident(SketchLine_73.endPoint(), SketchLine_74.startPoint())
 646 SketchConstraintCoincidence_121.setName("SketchConstraintCoincidence_127")
 647 SketchLine_75 = Sketch_8.addLine(-63.63698496776804, 83.16226073446268, 64.71305347901398, 83.16226073446268)
 648 SketchConstraintCoincidence_122 = Sketch_8.setCoincident(SketchLine_74.endPoint(), SketchLine_75.startPoint())
 649 SketchConstraintCoincidence_122.setName("SketchConstraintCoincidence_128")
 650 SketchLine_76 = Sketch_8.addLine(64.71305347901398, 83.16226073446268, 64.71305347901398, -34.06366086055925)
 651 SketchConstraintCoincidence_123 = Sketch_8.setCoincident(SketchLine_75.endPoint(), SketchLine_76.startPoint())
 652 SketchConstraintCoincidence_123.setName("SketchConstraintCoincidence_129")
 653 SketchLine_77 = Sketch_8.addLine(64.71305347901398, -34.06366086055925, 55, -34.06366086055925)
 654 SketchConstraintCoincidence_124 = Sketch_8.setCoincident(SketchLine_76.endPoint(), SketchLine_77.startPoint())
 655 SketchConstraintCoincidence_124.setName("SketchConstraintCoincidence_130")
 656 SketchConstraintCoincidence_125 = Sketch_8.setCoincident(SketchLine_68.startPoint(), SketchLine_77.endPoint())
 657 SketchConstraintCoincidence_125.setName("SketchConstraintCoincidence_131")
 658 SketchConstraintCoincidence_126 = Sketch_8.setCoincident(SketchPoint_11.coordinates(), SketchLine_77.endPoint())
 659 SketchConstraintCoincidence_126.setName("SketchConstraintCoincidence_132")
 660 SketchConstraintHorizontal_14 = Sketch_8.setHorizontal(SketchLine_77.result())
 661 SketchConstraintHorizontal_15 = Sketch_8.setHorizontal(SketchLine_73.result())
 662 SketchConstraintHorizontal_16 = Sketch_8.setHorizontal(SketchLine_75.result())
 663 SketchConstraintVertical_17 = Sketch_8.setVertical(SketchLine_74.result())
 664 SketchConstraintVertical_18 = Sketch_8.setVertical(SketchLine_76.result())
 665 SketchArc_15 = Sketch_8.addArc(45, 66.69872981077803, 55, 66.69873256076872, 45.00002965668516, 76.69872981077802, False)
 666 SketchArc_15.setName("SketchArc_16")
 667 SketchArc_15.result().setName("SketchArc_16")
 668 SketchArc_15.results()[1].setName("SketchArc_16_2")
 669 SketchConstraintCoincidence_127 = Sketch_8.setCoincident(SketchArc_15.startPoint(), SketchLine_67.endPoint())
 670 SketchConstraintCoincidence_127.setName("SketchConstraintCoincidence_133")
 671 SketchLine_78 = Sketch_8.addLine(45.00002965668516, 76.69872981077802, -55, 76.69872981077803)
 672 SketchLine_78.setAuxiliary(True)
 673 SketchConstraintCoincidence_128 = Sketch_8.setCoincident(SketchArc_15.endPoint(), SketchLine_78.startPoint())
 674 SketchConstraintCoincidence_128.setName("SketchConstraintCoincidence_134")
 675 SketchConstraintTangent_23 = Sketch_8.setTangent(SketchArc_15.results()[1], SketchLine_78.result())
 676 SketchConstraintTangent_24 = Sketch_8.setTangent(SketchArc_15.results()[1], SketchLine_67.result())
 677 SketchConstraintCoincidence_129 = Sketch_8.setCoincident(SketchLine_70.endPoint(), SketchLine_78.endPoint())
 678 SketchConstraintCoincidence_129.setName("SketchConstraintCoincidence_135")
 679 SketchConstraintCoincidence_130 = Sketch_8.setCoincident(SketchLine_68.startPoint(), SketchLine_67.startPoint())
 680 SketchConstraintCoincidence_130.setName("SketchConstraintCoincidence_136")
 681 SketchConstraintCoincidence_131 = Sketch_8.setCoincident(SketchLine_78.startPoint(), SketchLine_70.result())
 682 SketchConstraintCoincidence_131.setName("SketchConstraintCoincidence_137")
 683 SketchConstraintCoincidence_132 = Sketch_8.setCoincident(SketchLine_67.endPoint(), SketchLine_68.result())
 684 SketchConstraintCoincidence_132.setName("SketchConstraintCoincidence_138")
 685 SketchArc_16 = Sketch_8.addArc(-45, 66.69872981077802, -45.00000043269755, 76.69872981077803, -55, 66.69873008106598, False)
 686 SketchArc_16.setName("SketchArc_17")
 687 SketchArc_16.result().setName("SketchArc_17")
 688 SketchArc_16.results()[1].setName("SketchArc_17_2")
 689 SketchConstraintCoincidence_133 = Sketch_8.setCoincident(SketchArc_16.startPoint(), SketchLine_69.endPoint())
 690 SketchConstraintCoincidence_133.setName("SketchConstraintCoincidence_139")
 691 SketchConstraintCoincidence_134 = Sketch_8.setCoincident(SketchArc_16.endPoint(), SketchLine_71.startPoint())
 692 SketchConstraintCoincidence_134.setName("SketchConstraintCoincidence_140")
 693 SketchConstraintTangent_25 = Sketch_8.setTangent(SketchArc_16.results()[1], SketchLine_69.result())
 694 SketchConstraintTangent_26 = Sketch_8.setTangent(SketchArc_16.results()[1], SketchLine_71.result())
 695 SketchConstraintCoincidence_135 = Sketch_8.setCoincident(SketchLine_78.startPoint(), SketchLine_69.startPoint())
 696 SketchConstraintCoincidence_135.setName("SketchConstraintCoincidence_141")
 697 SketchConstraintCoincidence_136 = Sketch_8.setCoincident(SketchLine_72.endPoint(), SketchLine_71.endPoint())
 698 SketchConstraintCoincidence_136.setName("SketchConstraintCoincidence_142")
 699 SketchConstraintCoincidence_137 = Sketch_8.setCoincident(SketchLine_69.endPoint(), SketchLine_78.result())
 700 SketchConstraintCoincidence_137.setName("SketchConstraintCoincidence_143")
 701 SketchConstraintCoincidence_138 = Sketch_8.setCoincident(SketchLine_71.startPoint(), SketchLine_72.result())
 702 SketchConstraintCoincidence_138.setName("SketchConstraintCoincidence_144")
 703 SketchConstraintRadius_17 = Sketch_8.setRadius(SketchArc_15.results()[1], 10)
 704 SketchConstraintRadius_18 = Sketch_8.setRadius(SketchArc_16.results()[1], 10)
 705 SketchCircle_8 = Sketch_8.addCircle(-44, 51.69872981077802, 5)
 706 SketchConstraintRadius_19 = Sketch_8.setRadius(SketchCircle_8.results()[1], 5)
 707 SketchConstraintDistance_34 = Sketch_8.setDistance(SketchCircle_8.center(), SketchLine_69.result(), 25)
 708 SketchConstraintDistance_34.setName("SketchConstraintDistance_35")
 709 SketchConstraintDistance_35 = Sketch_8.setDistance(SketchCircle_8.center(), SketchLine_71.result(), 11)
 710 SketchConstraintDistance_35.setName("SketchConstraintDistance_36")
 711 SketchCircle_9 = Sketch_8.addCircle(-44, 16.69872981077804, 5)
 712 SketchConstraintRadius_20 = Sketch_8.setRadius(SketchCircle_9.results()[1], 5)
 713 SketchConstraintDistance_36 = Sketch_8.setDistance(SketchCircle_9.center(), SketchLine_71.result(), 11)
 714 SketchConstraintDistance_36.setName("SketchConstraintDistance_37")
 715 SketchConstraintDistance_37 = Sketch_8.setDistance(SketchCircle_9.center(), SketchLine_69.result(), 60)
 716 SketchConstraintDistance_37.setName("SketchConstraintDistance_38")
 717 SketchArc_17 = Sketch_8.addArc(44, 16.69872981077803, 49, 16.69872981077802, 39, 16.69872981077804, True)
 718 SketchArc_17.setName("SketchArc_19")
 719 SketchArc_17.result().setName("SketchArc_19")
 720 SketchArc_17.results()[1].setName("SketchArc_19_2")
 721 SketchConstraintRadius_21 = Sketch_8.setRadius(SketchArc_17.results()[1], 5)
 722 SketchConstraintRadius_21.setName("SketchConstraintRadius_22")
 723 SketchConstraintDistance_38 = Sketch_8.setDistance(SketchArc_17.center(), SketchLine_69.result(), 60)
 724 SketchConstraintDistance_38.setName("SketchConstraintDistance_41")
 725 SketchArc_18 = Sketch_8.addArc(44, 51.69872981077804, 49, 51.69872981077802, 39, 51.69872981077802, False)
 726 SketchLine_79 = Sketch_8.addLine(49, 16.69872981077802, 49, 51.69872981077802)
 727 SketchLine_79.setName("SketchLine_82")
 728 SketchLine_79.result().setName("SketchLine_82")
 729 SketchConstraintCoincidence_139 = Sketch_8.setCoincident(SketchArc_18.startPoint(), SketchLine_79.endPoint())
 730 SketchConstraintCoincidence_139.setName("SketchConstraintCoincidence_145")
 731 SketchConstraintCoincidence_140 = Sketch_8.setCoincident(SketchLine_79.startPoint(), SketchArc_17.startPoint())
 732 SketchConstraintCoincidence_140.setName("SketchConstraintCoincidence_146")
 733 SketchLine_80 = Sketch_8.addLine(39, 16.69872981077804, 39, 51.69872981077802)
 734 SketchLine_80.setName("SketchLine_83")
 735 SketchLine_80.result().setName("SketchLine_83")
 736 SketchConstraintCoincidence_141 = Sketch_8.setCoincident(SketchArc_17.endPoint(), SketchLine_80.startPoint())
 737 SketchConstraintCoincidence_141.setName("SketchConstraintCoincidence_147")
 738 SketchConstraintCoincidence_142 = Sketch_8.setCoincident(SketchArc_18.endPoint(), SketchLine_80.endPoint())
 739 SketchConstraintCoincidence_142.setName("SketchConstraintCoincidence_148")
 740 SketchConstraintDistance_39 = Sketch_8.setDistance(SketchArc_17.center(), SketchLine_67.result(), 11)
 741 SketchConstraintDistance_40 = Sketch_8.setDistance(SketchLine_69.result(), SketchArc_18.center(), 25)
 742 SketchConstraintDistance_41 = Sketch_8.setDistance(SketchArc_18.center(), SketchLine_67.result(), 11)
 743 SketchConstraintDistance_41.setName("SketchConstraintDistance_42")
 744 SketchConstraintRadius_22 = Sketch_8.setRadius(SketchArc_18.results()[1], 5)
 745 SketchConstraintRadius_22.setName("SketchConstraintRadius_23")
 746 model.do()
 747 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_79r-SketchLine_80r-SketchLine_81r-SketchLine_73r-SketchLine_74r-SketchLine_75r-SketchLine_76r-SketchLine_77r-SketchArc_16_2r-SketchArc_17_2r"), model.selection("WIRE", "Sketch_8/Wire-SketchCircle_8_2f"), model.selection("WIRE", "Sketch_8/Wire-SketchCircle_9_2f"), model.selection("WIRE", "Sketch_8/Wire-SketchArc_19_2f-SketchArc_18_2f-SketchLine_82f-SketchLine_83r")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_1_1")])
 748 Boolean_7 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Boolean_6_1")], [model.selection("SOLID", "ExtrusionCut_2_1")])
 749 model.end()
 750
 751 from GeomAPI import GeomAPI_Shape
 752
 753 model.testNbResults(Boolean_7, 1)
 754 model.testNbSubResults(Boolean_7, [0])
 755 model.testNbSubShapes(Boolean_7, GeomAPI_Shape.SOLID, [1])
 756 model.testNbSubShapes(Boolean_7, GeomAPI_Shape.FACE, [49])
 757 model.testNbSubShapes(Boolean_7, GeomAPI_Shape.EDGE, [263])
 758 model.testNbSubShapes(Boolean_7, GeomAPI_Shape.VERTEX, [526])
 759 model.testResultsVolumes(Boolean_7, [157000.328896829247241839766502380])
 760
 761 assert(model.checkPythonDump)