test.models/angle30.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 from salome.shaper import model
  22
  23 model.begin()
  24 partSet = model.moduleDocument()
  25 Part_1 = model.addPart(partSet)
  26 Part_1_doc = Part_1.document()
  27 Parameter_H = model.addParameter(Part_1_doc, "H", "6")
  28 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
  29 SketchLine_1 = Sketch_1.addLine(50, 70, 50, 9.237604307034024)
  30 SketchLine_1.setName("SketchLine_10")
  31 SketchLine_1.result().setName("SketchLine_10")
  32 SketchLine_2 = Sketch_1.addLine(42, -4.618802153516998, -53.92304845413265, -60)
  33 SketchLine_2.setName("SketchLine_11")
  34 SketchLine_2.result().setName("SketchLine_11")
  35 SketchLine_3 = Sketch_1.addLine(50, 70, 50, 0)
  36 SketchLine_3.setName("SketchLine_1")
  37 SketchLine_3.result().setName("SketchLine_1")
  38 SketchLine_3.setAuxiliary(True)
  39 SketchLine_4 = Sketch_1.addLine(50, 0, -53.92304845413265, -60)
  40 SketchLine_4.setName("SketchLine_2")
  41 SketchLine_4.result().setName("SketchLine_2")
  42 SketchLine_4.setAuxiliary(True)
  43 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  44 SketchLine_5 = Sketch_1.addLine(44, 9.237604307034037, 44, 70)
  45 SketchLine_5.setName("SketchLine_8")
  46 SketchLine_5.result().setName("SketchLine_8")
  47 SketchLine_6 = Sketch_1.addLine(-53.92304845413265, -60, -56.92304845413265, -54.80384757729332)
  48 SketchLine_6.setName("SketchLine_3")
  49 SketchLine_6.result().setName("SketchLine_3")
  50 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_6.startPoint())
  51 SketchLine_7 = Sketch_1.addLine(-56.92304845413265, -54.80384757729332, 39, 0.5773502691896394)
  52 SketchLine_7.setName("SketchLine_9")
  53 SketchLine_7.result().setName("SketchLine_9")
  54 SketchLine_8 = Sketch_1.addLine(-56.92304845413265, -54.80384757729332, 44, 3.464101615137764)
  55 SketchLine_8.setName("SketchLine_4")
  56 SketchLine_8.result().setName("SketchLine_4")
  57 SketchLine_8.setAuxiliary(True)
  58 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_8.startPoint())
  59 SketchLine_9 = Sketch_1.addLine(44, 3.464101615137764, 44, 70)
  60 SketchLine_9.setName("SketchLine_5")
  61 SketchLine_9.result().setName("SketchLine_5")
  62 SketchLine_9.setAuxiliary(True)
  63 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  64 SketchLine_10 = Sketch_1.addLine(44, 70, 50, 70)
  65 SketchLine_10.setName("SketchLine_6")
  66 SketchLine_10.result().setName("SketchLine_6")
  67 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
  68 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchLine_10.endPoint())
  69 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_3.result())
  70 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_9.result())
  71 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_10.result())
  72 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_3.startPoint(), SketchLine_9.result(), "H", False)
  73 SketchLine_11 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OZ"))
  74 SketchLine_11.setName("SketchLine_7")
  75 SketchLine_11.result().setName("SketchLine_7")
  76 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_3.startPoint(), SketchLine_11.result(), 50, False)
  77 SketchArc_1 = Sketch_1.addArc(34, 9.237604307034037, 39, 0.5773502691896394, 44, 9.237604307034037, False)
  78 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_7.endPoint())
  79 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_5.startPoint())
  80 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_5.result())
  81 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_7.result())
  82 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_5.endPoint())
  83 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_8.startPoint(), SketchLine_7.startPoint())
  84 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_9.result())
  85 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.result())
  86 SketchArc_2 = Sketch_1.addArc(34, 9.237604307034022, 42, -4.618802153516998, 50, 9.237604307034024, False)
  87 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_2.startPoint())
  88 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_1.endPoint())
  89 SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_1.result())
  90 SketchConstraintTangent_4 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_2.result())
  91 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchLine_1.startPoint())
  92 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_2.endPoint())
  93 SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.result())
  94 SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchLine_4.result())
  95 SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_1.startPoint(), SketchLine_4.startPoint(), 70, False)
  96 SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_2.result(), SketchLine_6.result())
  97 SketchConstraintDistance_4 = Sketch_1.setDistance(SketchLine_6.endPoint(), SketchLine_2.result(), 6, False)
  98 SketchConstraintParallel_1 = Sketch_1.setParallel(SketchLine_2.result(), SketchLine_7.result())
  99 SketchConstraintAngle_1 = Sketch_1.setAngle(SketchLine_1.result(), SketchLine_2.result(), 119.9999999999999)
 100 SketchConstraintDistance_5 = Sketch_1.setDistance(SketchLine_4.startPoint(), SketchLine_6.startPoint(), 120, False)
 101 SketchLine_12 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OY"))
 102 SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchLine_4.startPoint(), SketchLine_12.result())
 103 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_2.results()[1], 16)
 104 SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_1.results()[1], 10)
 105 model.do()
 106 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
 107 SketchCircle_1 = Sketch_2.addCircle(0, 0, 17.5)
 108 SketchPoint_1 = Sketch_2.addPoint(model.selection("VERTEX", "PartSet/Origin"))
 109 SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchCircle_1.center(), SketchPoint_1.result())
 110 SketchConstraintRadius_3 = Sketch_2.setRadius(SketchCircle_1.results()[1], 17.5)
 111 SketchCircle_2 = Sketch_2.addCircle(0, 0, 14.5)
 112 SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchCircle_1.center(), SketchCircle_2.center())
 113 SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchPoint_1.coordinates(), SketchCircle_2.center())
 114 SketchConstraintRadius_4 = Sketch_2.setRadius(SketchCircle_2.results()[1], 14.5)
 115 model.do()
 116 Sketch_3 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
 117 SketchLine_13 = Sketch_3.addLine(-22, 70, -22, -35.79571668975675)
 118 SketchLine_14 = Sketch_3.addLine(-22, -35.79571668975675, 55, 8.660254037844405)
 119 SketchConstraintCoincidence_23 = Sketch_3.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
 120 SketchLine_15 = Sketch_3.addLine(55, 8.660254037844405, 55, 70)
 121 SketchConstraintCoincidence_24 = Sketch_3.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
 122 SketchLine_16 = Sketch_3.addLine(55, 70, -22, 70)
 123 SketchConstraintCoincidence_25 = Sketch_3.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint())
 124 SketchConstraintCoincidence_26 = Sketch_3.setCoincident(SketchLine_13.startPoint(), SketchLine_16.endPoint())
 125 SketchConstraintHorizontal_2 = Sketch_3.setHorizontal(SketchLine_16.result())
 126 SketchConstraintVertical_3 = Sketch_3.setVertical(SketchLine_15.result())
 127 SketchConstraintVertical_4 = Sketch_3.setVertical(SketchLine_13.result())
 128 SketchLine_17 = Sketch_3.addLine(model.selection("EDGE", "Sketch_1/SketchLine_4"))
 129 SketchConstraintParallel_2 = Sketch_3.setParallel(SketchLine_14.result(), SketchLine_17.result())
 130 SketchConstraintDistance_6 = Sketch_3.setDistance(SketchLine_14.endPoint(), SketchLine_17.result(), 1, False)
 131 SketchLine_18 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OZ"))
 132 SketchConstraintDistance_7 = Sketch_3.setDistance(SketchLine_16.startPoint(), SketchLine_18.result(), 55, False)
 133 SketchConstraintDistance_8 = Sketch_3.setDistance(SketchLine_13.startPoint(), SketchLine_18.result(), 22, False)
 134 SketchLine_19 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OY"))
 135 SketchConstraintDistance_9 = Sketch_3.setDistance(SketchLine_15.endPoint(), SketchLine_19.result(), 70, False)
 136 model.do()
 137 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchCircle_1_2r-SketchCircle_2_2r_wire")], model.selection(), 75, 45)
 138 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 22, 22)
 139 Common_1 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
 140 Sketch_4 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
 141 SketchLine_20 = Sketch_4.addLine(-4, 38, -4, 21.26617031813674)
 142 SketchLine_20.setName("SketchLine_36")
 143 SketchLine_20.result().setName("SketchLine_36")
 144 SketchArc_3 = Sketch_4.addArc(0, 0, -8.5, 15.2970585407786, -7.446808510638298, 15.83650981137842, True)
 145 SketchArc_3.setName("SketchArc_6")
 146 SketchArc_3.result().setName("SketchArc_6")
 147 SketchArc_3.results()[1].setName("SketchArc_6_2")
 148 SketchArc_4 = Sketch_4.addArc(0, 0, 7.446808510638299, 15.83650981137842, 8.5, 15.29705854077835, True)
 149 SketchArc_4.setName("SketchArc_8")
 150 SketchArc_4.result().setName("SketchArc_8")
 151 SketchArc_4.results()[1].setName("SketchArc_8_2")
 152 SketchLine_21 = Sketch_4.addLine(4, 21.26617031813674, 4, 38)
 153 SketchLine_21.setName("SketchLine_38")
 154 SketchLine_21.result().setName("SketchLine_38")
 155 SketchLine_22 = Sketch_4.addLine(-8.5, 15.2970585407786, -8.5, 12)
 156 SketchLine_22.setName("SketchLine_22")
 157 SketchLine_22.result().setName("SketchLine_22")
 158 SketchLine_23 = Sketch_4.addLine(-10.1, 44, -10, 44)
 159 SketchLine_23.setName("SketchLine_37")
 160 SketchLine_23.result().setName("SketchLine_37")
 161 SketchLine_24 = Sketch_4.addLine(10, 44, 10.1, 44)
 162 SketchLine_24.setName("SketchLine_39")
 163 SketchLine_24.result().setName("SketchLine_39")
 164 SketchLine_25 = Sketch_4.addLine(8.5, 12, 8.5, 15.29705854077835)
 165 SketchLine_25.setName("SketchLine_24")
 166 SketchLine_25.result().setName("SketchLine_24")
 167 SketchLine_26 = Sketch_4.addLine(4, 44, 10.1, 44)
 168 SketchLine_26.setName("SketchLine_26")
 169 SketchLine_26.result().setName("SketchLine_26")
 170 SketchLine_26.setAuxiliary(True)
 171 SketchLine_27 = Sketch_4.addLine(4, 17.03672503740084, 4, 44)
 172 SketchLine_27.setName("SketchLine_27")
 173 SketchLine_27.result().setName("SketchLine_27")
 174 SketchLine_27.setAuxiliary(True)
 175 SketchConstraintCoincidence_27 = Sketch_4.setCoincident(SketchLine_27.endPoint(), SketchLine_26.startPoint())
 176 SketchLine_28 = Sketch_4.addLine(10.1, 44, 10.1, 45)
 177 SketchLine_28.setName("SketchLine_28")
 178 SketchLine_28.result().setName("SketchLine_28")
 179 SketchConstraintCoincidence_28 = Sketch_4.setCoincident(SketchLine_26.endPoint(), SketchLine_28.startPoint())
 180 SketchLine_29 = Sketch_4.addLine(10.1, 45, -10.1, 45)
 181 SketchLine_29.setName("SketchLine_29")
 182 SketchLine_29.result().setName("SketchLine_29")
 183 SketchConstraintCoincidence_29 = Sketch_4.setCoincident(SketchLine_28.endPoint(), SketchLine_29.startPoint())
 184 SketchLine_30 = Sketch_4.addLine(-10.1, 45, -10.1, 44)
 185 SketchLine_30.setName("SketchLine_30")
 186 SketchLine_30.result().setName("SketchLine_30")
 187 SketchConstraintCoincidence_30 = Sketch_4.setCoincident(SketchLine_29.endPoint(), SketchLine_30.startPoint())
 188 SketchLine_31 = Sketch_4.addLine(-10.1, 44, -4, 44)
 189 SketchLine_31.setName("SketchLine_31")
 190 SketchLine_31.result().setName("SketchLine_31")
 191 SketchLine_31.setAuxiliary(True)
 192 SketchConstraintCoincidence_31 = Sketch_4.setCoincident(SketchLine_30.endPoint(), SketchLine_31.startPoint())
 193 SketchLine_32 = Sketch_4.addLine(-4, 44, -4, 17.03672503740078)
 194 SketchLine_32.setName("SketchLine_20")
 195 SketchLine_32.result().setName("SketchLine_20")
 196 SketchLine_32.setAuxiliary(True)
 197 SketchConstraintCoincidence_32 = Sketch_4.setCoincident(SketchLine_32.startPoint(), SketchLine_31.endPoint())
 198 SketchConstraintVertical_5 = Sketch_4.setVertical(SketchLine_32.result())
 199 SketchConstraintVertical_6 = Sketch_4.setVertical(SketchLine_27.result())
 200 SketchConstraintHorizontal_3 = Sketch_4.setHorizontal(SketchLine_29.result())
 201 SketchConstraintHorizontal_4 = Sketch_4.setHorizontal(SketchLine_31.result())
 202 SketchConstraintHorizontal_5 = Sketch_4.setHorizontal(SketchLine_26.result())
 203 SketchConstraintVertical_7 = Sketch_4.setVertical(SketchLine_30.result())
 204 SketchConstraintVertical_8 = Sketch_4.setVertical(SketchLine_28.result())
 205 SketchConstraintVertical_9 = Sketch_4.setVertical(SketchLine_25.result())
 206 SketchConstraintVertical_10 = Sketch_4.setVertical(SketchLine_22.result())
 207 SketchLine_33 = Sketch_4.addLine(model.selection("EDGE", "PartSet/OY"))
 208 SketchLine_33.setName("SketchLine_32")
 209 SketchLine_33.result().setName("SketchLine_32")
 210 SketchConstraintDistance_10 = Sketch_4.setDistance(SketchLine_22.startPoint(), SketchLine_32.result(), 4.5, False)
 211 SketchLine_34 = Sketch_4.addLine(-8.5, 12, 8.5, 12)
 212 SketchLine_34.setName("SketchLine_33")
 213 SketchLine_34.result().setName("SketchLine_33")
 214 SketchConstraintCoincidence_33 = Sketch_4.setCoincident(SketchLine_22.endPoint(), SketchLine_34.startPoint())
 215 SketchConstraintHorizontal_6 = Sketch_4.setHorizontal(SketchLine_34.result())
 216 SketchPoint_2 = Sketch_4.addPoint(model.selection("VERTEX", "PartSet/Origin"))
 217 SketchArc_5 = Sketch_4.addArc(0, 0, -8.5, 15.29705854, -4, 17.0367250374, True)
 218 SketchArc_5.setName("SketchArc_4")
 219 SketchArc_5.result().setName("SketchArc_4")
 220 SketchArc_5.results()[1].setName("SketchArc_4_2")
 221 SketchArc_5.setAuxiliary(True)
 222 SketchConstraintCoincidence_34 = Sketch_4.setCoincident(SketchLine_22.startPoint(), SketchArc_5.startPoint())
 223 SketchArc_6 = Sketch_4.addArc(0, 0, 4, 17.0367250374, 8.5, 15.29705854, True)
 224 SketchArc_6.setName("SketchArc_5")
 225 SketchArc_6.result().setName("SketchArc_5")
 226 SketchArc_6.results()[1].setName("SketchArc_5_2")
 227 SketchArc_6.setAuxiliary(True)
 228 SketchConstraintCoincidence_35 = Sketch_4.setCoincident(SketchLine_25.endPoint(), SketchArc_6.endPoint())
 229 SketchPoint_3 = Sketch_4.addPoint(-4, 17.03672503740078)
 230 SketchPoint_4 = Sketch_4.addPoint(4, 17.03672503740084)
 231 SketchConstraintCoincidence_36 = Sketch_4.setCoincident(SketchArc_5.endPoint(), SketchPoint_3.coordinates())
 232 SketchConstraintCoincidence_37 = Sketch_4.setCoincident(SketchArc_6.startPoint(), SketchPoint_4.coordinates())
 233 SketchConstraintCoincidence_38 = Sketch_4.setCoincident(SketchArc_5.endPoint(), SketchLine_32.endPoint())
 234 SketchConstraintCoincidence_39 = Sketch_4.setCoincident(SketchPoint_4.coordinates(), SketchLine_27.startPoint())
 235 SketchArc_7 = Sketch_4.addArc(-10, 21.26617031813674, -7.446808510638298, 15.83650981137842, -4, 21.26617031813674, False)
 236 SketchArc_7.setName("SketchArc_7")
 237 SketchArc_7.result().setName("SketchArc_7")
 238 SketchArc_7.results()[1].setName("SketchArc_7_2")
 239 SketchConstraintCoincidence_40 = Sketch_4.setCoincident(SketchArc_7.startPoint(), SketchArc_3.endPoint())
 240 SketchLine_35 = Sketch_4.addLine(-4, 44, -4, 21.26617031813674)
 241 SketchLine_35.setName("SketchLine_34")
 242 SketchLine_35.result().setName("SketchLine_34")
 243 SketchLine_35.setAuxiliary(True)
 244 SketchConstraintCoincidence_41 = Sketch_4.setCoincident(SketchArc_7.endPoint(), SketchLine_35.endPoint())
 245 SketchConstraintTangent_5 = Sketch_4.setTangent(SketchArc_7.results()[1], SketchLine_35.result())
 246 SketchConstraintTangent_6 = Sketch_4.setTangent(SketchArc_7.results()[1], SketchArc_3.results()[1])
 247 SketchConstraintCoincidence_42 = Sketch_4.setCoincident(SketchLine_32.startPoint(), SketchLine_35.startPoint())
 248 SketchConstraintCoincidence_43 = Sketch_4.setCoincident(SketchArc_5.startPoint(), SketchArc_3.startPoint())
 249 SketchConstraintTangent_7 = Sketch_4.setTangent(SketchArc_5.results()[1], SketchArc_3.results()[1])
 250 SketchConstraintCoincidence_44 = Sketch_4.setCoincident(SketchLine_35.endPoint(), SketchLine_32.result())
 251 SketchConstraintCoincidence_45 = Sketch_4.setCoincident(SketchArc_3.endPoint(), SketchArc_5.results()[1])
 252 SketchArc_8 = Sketch_4.addArc(10, 21.26617031813674, 4, 21.26617031813674, 7.446808510638299, 15.83650981137842, False)
 253 SketchArc_8.setName("SketchArc_9")
 254 SketchArc_8.result().setName("SketchArc_9")
 255 SketchArc_8.results()[1].setName("SketchArc_9_2")
 256 SketchLine_36 = Sketch_4.addLine(4, 21.26617031813674, 4, 44)
 257 SketchLine_36.setName("SketchLine_35")
 258 SketchLine_36.result().setName("SketchLine_35")
 259 SketchLine_36.setAuxiliary(True)
 260 SketchConstraintCoincidence_46 = Sketch_4.setCoincident(SketchArc_8.startPoint(), SketchLine_36.startPoint())
 261 SketchConstraintCoincidence_47 = Sketch_4.setCoincident(SketchArc_8.endPoint(), SketchArc_4.startPoint())
 262 SketchConstraintTangent_8 = Sketch_4.setTangent(SketchArc_8.results()[1], SketchArc_4.results()[1])
 263 SketchConstraintTangent_9 = Sketch_4.setTangent(SketchArc_8.results()[1], SketchLine_36.result())
 264 SketchConstraintCoincidence_48 = Sketch_4.setCoincident(SketchArc_6.endPoint(), SketchArc_4.endPoint())
 265 SketchConstraintCoincidence_49 = Sketch_4.setCoincident(SketchLine_27.endPoint(), SketchLine_36.endPoint())
 266 SketchConstraintTangent_10 = Sketch_4.setTangent(SketchArc_6.results()[1], SketchArc_4.results()[1])
 267 SketchConstraintCoincidence_50 = Sketch_4.setCoincident(SketchArc_4.startPoint(), SketchArc_6.results()[1])
 268 SketchConstraintCoincidence_51 = Sketch_4.setCoincident(SketchLine_36.startPoint(), SketchLine_27.result())
 269 SketchConstraintCoincidence_52 = Sketch_4.setCoincident(SketchLine_25.startPoint(), SketchLine_34.endPoint())
 270 SketchCircle_3 = Sketch_4.addCircle(model.selection("EDGE", "Sketch_2/SketchCircle_1_2"))
 271 SketchConstraintCoincidence_53 = Sketch_4.setCoincident(SketchLine_22.startPoint(), SketchCircle_3.results()[1])
 272 SketchConstraintCoincidence_54 = Sketch_4.setCoincident(SketchArc_4.endPoint(), SketchCircle_3.results()[1])
 273 SketchConstraintRadius_5 = Sketch_4.setRadius(SketchArc_7.results()[1], 6)
 274 SketchConstraintRadius_6 = Sketch_4.setRadius(SketchArc_8.results()[1], 6)
 275 SketchConstraintDistance_11 = Sketch_4.setDistance(SketchLine_25.endPoint(), SketchLine_36.result(), 4.5, False)
 276 SketchConstraintDistance_12 = Sketch_4.setDistance(SketchArc_8.startPoint(), SketchLine_33.result(), 4, False)
 277 SketchConstraintDistance_13 = Sketch_4.setDistance(SketchArc_7.endPoint(), SketchLine_33.result(), 4, False)
 278 SketchArc_9 = Sketch_4.addArc(-10, 38, -4, 38, -10, 44, False)
 279 SketchArc_9.setName("SketchArc_10")
 280 SketchArc_9.result().setName("SketchArc_10")
 281 SketchArc_9.results()[1].setName("SketchArc_10_2")
 282 SketchConstraintCoincidence_55 = Sketch_4.setCoincident(SketchArc_9.startPoint(), SketchLine_20.startPoint())
 283 SketchConstraintCoincidence_56 = Sketch_4.setCoincident(SketchArc_9.endPoint(), SketchLine_23.endPoint())
 284 SketchConstraintTangent_11 = Sketch_4.setTangent(SketchArc_9.results()[1], SketchLine_20.result())
 285 SketchConstraintTangent_12 = Sketch_4.setTangent(SketchArc_9.results()[1], SketchLine_23.result())
 286 SketchConstraintCoincidence_57 = Sketch_4.setCoincident(SketchLine_35.endPoint(), SketchLine_20.endPoint())
 287 SketchConstraintCoincidence_58 = Sketch_4.setCoincident(SketchLine_31.startPoint(), SketchLine_23.startPoint())
 288 SketchConstraintCoincidence_59 = Sketch_4.setCoincident(SketchLine_20.startPoint(), SketchLine_35.result())
 289 SketchConstraintCoincidence_60 = Sketch_4.setCoincident(SketchLine_23.endPoint(), SketchLine_31.result())
 290 SketchArc_10 = Sketch_4.addArc(10, 38, 10, 44, 4, 38, False)
 291 SketchArc_10.setName("SketchArc_11")
 292 SketchArc_10.result().setName("SketchArc_11")
 293 SketchArc_10.results()[1].setName("SketchArc_11_2")
 294 SketchConstraintCoincidence_61 = Sketch_4.setCoincident(SketchArc_10.startPoint(), SketchLine_24.startPoint())
 295 SketchConstraintCoincidence_62 = Sketch_4.setCoincident(SketchArc_10.endPoint(), SketchLine_21.endPoint())
 296 SketchConstraintTangent_13 = Sketch_4.setTangent(SketchArc_10.results()[1], SketchLine_21.result())
 297 SketchConstraintTangent_14 = Sketch_4.setTangent(SketchArc_10.results()[1], SketchLine_24.result())
 298 SketchConstraintCoincidence_63 = Sketch_4.setCoincident(SketchLine_36.startPoint(), SketchLine_21.startPoint())
 299 SketchConstraintCoincidence_64 = Sketch_4.setCoincident(SketchLine_26.endPoint(), SketchLine_24.endPoint())
 300 SketchConstraintCoincidence_65 = Sketch_4.setCoincident(SketchLine_21.endPoint(), SketchLine_36.result())
 301 SketchConstraintCoincidence_66 = Sketch_4.setCoincident(SketchLine_24.startPoint(), SketchLine_26.result())
 302 SketchConstraintRadius_7 = Sketch_4.setRadius(SketchArc_9.results()[1], 6)
 303 SketchConstraintRadius_8 = Sketch_4.setRadius(SketchArc_10.results()[1], 6)
 304 SketchConstraintDistance_14 = Sketch_4.setDistance(SketchLine_23.startPoint(), SketchLine_29.result(), 1, False)
 305 SketchConstraintDistance_15 = Sketch_4.setDistance(SketchLine_24.endPoint(), SketchLine_29.result(), 1, False)
 306 SketchLine_37 = Sketch_4.addLine(model.selection("EDGE", "PartSet/OX"))
 307 SketchLine_37.setName("SketchLine_40")
 308 SketchLine_37.result().setName("SketchLine_40")
 309 SketchConstraintDistance_16 = Sketch_4.setDistance(SketchArc_10.startPoint(), SketchLine_37.result(), 44, False)
 310 SketchConstraintDistance_17 = Sketch_4.setDistance(SketchLine_21.result(), SketchLine_24.endPoint(), 6.1, False)
 311 SketchConstraintDistance_18 = Sketch_4.setDistance(SketchLine_30.endPoint(), SketchLine_20.result(), 6.1, False)
 312 SketchConstraintCoincidence_67 = Sketch_4.setCoincident(SketchArc_3.center(), SketchCircle_3.center())
 313 SketchConstraintCoincidence_68 = Sketch_4.setCoincident(SketchArc_4.center(), SketchArc_3.center())
 314 SketchConstraintDistance_19 = Sketch_4.setDistance(SketchArc_4.center(), SketchLine_34.result(), 12, False)
 315 model.do()
 316 Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), 50, 30)
 317 Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 22, 22)
 318 Common_2 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1")], [model.selection("SOLID", "Extrusion_4_1")])
 319 Extrusion_5 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 22, 22)
 320 Extrusion_6 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_2_2f")], model.selection(), 75, 40)
 321 Common_3 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_6_1")], [model.selection("SOLID", "Extrusion_5_1")])
 322 Sketch_5 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
 323 SketchLine_38 = Sketch_5.addLine(44, 3.464101615137764, 16.5, 51.0954988232819)
 324 SketchLine_38.setName("SketchLine_41")
 325 SketchLine_38.result().setName("SketchLine_41")
 326 SketchPoint_5 = Sketch_5.addPoint(model.selection("VERTEX", "Sketch_1/SketchLine_4_EndVertex"))
 327 SketchConstraintCoincidence_69 = Sketch_5.setCoincident(SketchLine_38.startPoint(), SketchPoint_5.result())
 328 SketchLine_39 = Sketch_5.addLine(model.selection("EDGE", "Sketch_1/SketchLine_4"))
 329 SketchLine_39.setName("SketchLine_42")
 330 SketchLine_39.result().setName("SketchLine_42")
 331 SketchConstraintPerpendicular_2 = Sketch_5.setPerpendicular(SketchLine_38.result(), SketchLine_39.result())
 332 SketchConstraintLength_1 = Sketch_5.setLength(SketchLine_38.result(), 55)
 333 model.do()
 334 Axis_4 = model.addAxis(Part_1_doc, model.selection("FACE", "Sketch_1/Face-SketchLine_6r-SketchLine_8r-SketchArc_1_2r-SketchLine_9r-SketchLine_3r-SketchLine_11r-SketchArc_2_2f-SketchLine_10r"), model.selection("VERTEX", "Sketch_1/SketchLine_4_EndVertex"))
 335 Plane_4 = model.addPlane(Part_1_doc, model.selection("EDGE", "Axis_1"), model.selection("VERTEX", "Sketch_5/SketchLine_41_EndVertex"), False)
 336 Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
 337 SketchLine_40 = Sketch_6.addLine(4, 13, 4, 12.9)
 338 SketchLine_40.setName("SketchLine_55")
 339 SketchLine_40.result().setName("SketchLine_55")
 340 SketchLine_41 = Sketch_6.addLine(4, 12.9, -4, 12.9)
 341 SketchLine_41.setName("SketchLine_44")
 342 SketchLine_41.result().setName("SketchLine_44")
 343 SketchLine_42 = Sketch_6.addLine(4, 19, 4, 12.9)
 344 SketchLine_42.setName("SketchLine_43")
 345 SketchLine_42.result().setName("SketchLine_43")
 346 SketchLine_42.setAuxiliary(True)
 347 SketchConstraintCoincidence_70 = Sketch_6.setCoincident(SketchLine_42.endPoint(), SketchLine_41.startPoint())
 348 SketchLine_43 = Sketch_6.addLine(-4, 12.9, -4, 13)
 349 SketchLine_43.setName("SketchLine_52")
 350 SketchLine_43.result().setName("SketchLine_52")
 351 SketchLine_44 = Sketch_6.addLine(-10, 19, -10.1, 19)
 352 SketchLine_44.setName("SketchLine_53")
 353 SketchLine_44.result().setName("SketchLine_53")
 354 SketchLine_45 = Sketch_6.addLine(-4, 12.9, -4, 19)
 355 SketchLine_45.setName("SketchLine_45")
 356 SketchLine_45.result().setName("SketchLine_45")
 357 SketchLine_45.setAuxiliary(True)
 358 SketchConstraintCoincidence_71 = Sketch_6.setCoincident(SketchLine_41.endPoint(), SketchLine_45.startPoint())
 359 SketchLine_46 = Sketch_6.addLine(10.1, 19, 10, 19)
 360 SketchLine_46.setName("SketchLine_54")
 361 SketchLine_46.result().setName("SketchLine_54")
 362 SketchLine_47 = Sketch_6.addLine(-4, 19, -10.1, 19)
 363 SketchLine_47.setName("SketchLine_46")
 364 SketchLine_47.result().setName("SketchLine_46")
 365 SketchLine_47.setAuxiliary(True)
 366 SketchConstraintCoincidence_72 = Sketch_6.setCoincident(SketchLine_45.endPoint(), SketchLine_47.startPoint())
 367 SketchLine_48 = Sketch_6.addLine(-10.1, 19, -10.1, 19.8)
 368 SketchLine_48.setName("SketchLine_47")
 369 SketchLine_48.result().setName("SketchLine_47")
 370 SketchConstraintCoincidence_73 = Sketch_6.setCoincident(SketchLine_47.endPoint(), SketchLine_48.startPoint())
 371 SketchLine_49 = Sketch_6.addLine(-10.1, 19.8, 10.1, 19.8)
 372 SketchLine_49.setName("SketchLine_48")
 373 SketchLine_49.result().setName("SketchLine_48")
 374 SketchConstraintCoincidence_74 = Sketch_6.setCoincident(SketchLine_48.endPoint(), SketchLine_49.startPoint())
 375 SketchLine_50 = Sketch_6.addLine(10.1, 19.8, 10.1, 19)
 376 SketchLine_50.setName("SketchLine_49")
 377 SketchLine_50.result().setName("SketchLine_49")
 378 SketchConstraintCoincidence_75 = Sketch_6.setCoincident(SketchLine_49.endPoint(), SketchLine_50.startPoint())
 379 SketchLine_51 = Sketch_6.addLine(10.1, 19, 4, 19)
 380 SketchLine_51.setName("SketchLine_50")
 381 SketchLine_51.result().setName("SketchLine_50")
 382 SketchLine_51.setAuxiliary(True)
 383 SketchConstraintCoincidence_76 = Sketch_6.setCoincident(SketchLine_50.endPoint(), SketchLine_51.startPoint())
 384 SketchConstraintCoincidence_77 = Sketch_6.setCoincident(SketchLine_42.startPoint(), SketchLine_51.endPoint())
 385 SketchConstraintVertical_11 = Sketch_6.setVertical(SketchLine_45.result())
 386 SketchConstraintVertical_12 = Sketch_6.setVertical(SketchLine_42.result())
 387 SketchConstraintHorizontal_7 = Sketch_6.setHorizontal(SketchLine_41.result())
 388 SketchConstraintHorizontal_8 = Sketch_6.setHorizontal(SketchLine_47.result())
 389 SketchConstraintHorizontal_9 = Sketch_6.setHorizontal(SketchLine_51.result())
 390 SketchConstraintHorizontal_10 = Sketch_6.setHorizontal(SketchLine_49.result())
 391 SketchConstraintVertical_13 = Sketch_6.setVertical(SketchLine_50.result())
 392 SketchConstraintDistance_20 = Sketch_6.setDistance(SketchLine_48.startPoint(), SketchLine_49.result(), 0.8, False)
 393 SketchConstraintDistance_21 = Sketch_6.setDistance(SketchLine_51.startPoint(), SketchLine_49.result(), 0.8, False)
 394 SketchLine_52 = Sketch_6.addLine(model.selection("EDGE", "Sketch_5/SketchLine_41"))
 395 SketchLine_52.setName("SketchLine_51")
 396 SketchLine_52.result().setName("SketchLine_51")
 397 SketchConstraintDistance_22 = Sketch_6.setDistance(SketchLine_45.startPoint(), SketchLine_52.result(), 4, False)
 398 SketchConstraintDistance_23 = Sketch_6.setDistance(SketchLine_42.endPoint(), SketchLine_52.result(), 4, False)
 399 SketchArc_11 = Sketch_6.addArc(-10, 13, -4, 13, -10, 19, False)
 400 SketchArc_11.setName("SketchArc_12")
 401 SketchArc_11.result().setName("SketchArc_12")
 402 SketchArc_11.results()[1].setName("SketchArc_12_2")
 403 SketchConstraintCoincidence_78 = Sketch_6.setCoincident(SketchArc_11.startPoint(), SketchLine_43.endPoint())
 404 SketchConstraintCoincidence_79 = Sketch_6.setCoincident(SketchArc_11.endPoint(), SketchLine_44.startPoint())
 405 SketchConstraintTangent_15 = Sketch_6.setTangent(SketchArc_11.results()[1], SketchLine_43.result())
 406 SketchConstraintTangent_16 = Sketch_6.setTangent(SketchArc_11.results()[1], SketchLine_44.result())
 407 SketchConstraintCoincidence_80 = Sketch_6.setCoincident(SketchLine_45.startPoint(), SketchLine_43.startPoint())
 408 SketchConstraintCoincidence_81 = Sketch_6.setCoincident(SketchLine_47.endPoint(), SketchLine_44.endPoint())
 409 SketchConstraintCoincidence_82 = Sketch_6.setCoincident(SketchLine_43.endPoint(), SketchLine_45.result())
 410 SketchConstraintCoincidence_83 = Sketch_6.setCoincident(SketchLine_44.startPoint(), SketchLine_47.result())
 411 SketchArc_12 = Sketch_6.addArc(10, 13, 10, 19, 4, 13, False)
 412 SketchArc_12.setName("SketchArc_13")
 413 SketchArc_12.result().setName("SketchArc_13")
 414 SketchArc_12.results()[1].setName("SketchArc_13_2")
 415 SketchConstraintCoincidence_84 = Sketch_6.setCoincident(SketchArc_12.startPoint(), SketchLine_46.endPoint())
 416 SketchConstraintCoincidence_85 = Sketch_6.setCoincident(SketchArc_12.endPoint(), SketchLine_40.startPoint())
 417 SketchConstraintTangent_17 = Sketch_6.setTangent(SketchArc_12.results()[1], SketchLine_46.result())
 418 SketchConstraintTangent_18 = Sketch_6.setTangent(SketchArc_12.results()[1], SketchLine_40.result())
 419 SketchConstraintCoincidence_86 = Sketch_6.setCoincident(SketchLine_51.startPoint(), SketchLine_46.startPoint())
 420 SketchConstraintCoincidence_87 = Sketch_6.setCoincident(SketchLine_42.endPoint(), SketchLine_40.endPoint())
 421 SketchConstraintCoincidence_88 = Sketch_6.setCoincident(SketchLine_46.endPoint(), SketchLine_51.result())
 422 SketchConstraintCoincidence_89 = Sketch_6.setCoincident(SketchLine_40.startPoint(), SketchLine_42.result())
 423 SketchConstraintRadius_9 = Sketch_6.setRadius(SketchArc_11.results()[1], 6)
 424 SketchConstraintRadius_10 = Sketch_6.setRadius(SketchArc_12.results()[1], 6)
 425 SketchConstraintDistance_24 = Sketch_6.setDistance(SketchLine_40.result(), SketchLine_46.startPoint(), 6.1, False)
 426 SketchConstraintDistance_25 = Sketch_6.setDistance(SketchLine_48.startPoint(), SketchLine_43.result(), 6.1, False)
 427 SketchConstraintVertical_14 = Sketch_6.setVertical(SketchLine_48.result())
 428 SketchConstraintDistance_26 = Sketch_6.setDistance(SketchLine_41.result(), SketchArc_12.startPoint(), 6.1, False)
 429 SketchLine_53 = Sketch_6.addLine(model.selection("EDGE", "Axis_1"))
 430 SketchLine_53.setName("SketchLine_56")
 431 SketchLine_53.result().setName("SketchLine_56")
 432 SketchConstraintCoincidence_90 = Sketch_6.setCoincident(SketchArc_12.startPoint(), SketchLine_53.result())
 433 model.do()
 434 Extrusion_7 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchArc_13_2r-SketchLine_54r-SketchLine_49r-SketchLine_48r-SketchLine_47r-SketchLine_53r-SketchArc_12_2r-SketchLine_52r-SketchLine_44r-SketchLine_55r")], model.selection(), 0, 40)
 435 Fuse_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Common_1_1")], [model.selection("SOLID", "Common_2_1")])
 436 Fuse_2 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Fuse_1_1")], [model.selection("SOLID", "Extrusion_7_1")])
 437 Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Fuse_2_1")], [model.selection("SOLID", "Common_3_1")])
 438 Extrusion_8 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_6r-SketchLine_8r-SketchArc_1_2r-SketchLine_9r-SketchLine_3r-SketchLine_11r-SketchArc_2_2f-SketchLine_10r_wire")], model.selection(), 55, 55)
 439 Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_10"))
 440 SketchLine_54 = Sketch_7.addLine(55, -9.237604307034024, 55, -60)
 441 SketchLine_54.setName("SketchLine_66")
 442 SketchLine_54.result().setName("SketchLine_66")
 443 SketchPoint_6 = Sketch_7.addPoint(model.selection("VERTEX", "[Extrusion_8_1/Generated_Face&Sketch_1/SketchArc_2_2][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_10][Extrusion_8_1/To_Face]"))
 444 SketchLine_55 = Sketch_7.addLine(55, -9.237604307034024, 55, -70)
 445 SketchLine_55.setName("SketchLine_57")
 446 SketchLine_55.result().setName("SketchLine_57")
 447 SketchLine_55.setAuxiliary(True)
 448 SketchConstraintCoincidence_91 = Sketch_7.setCoincident(SketchLine_55.startPoint(), SketchPoint_6.result())
 449 SketchPoint_7 = Sketch_7.addPoint(model.selection("VERTEX", "[Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_10][Extrusion_8_1/To_Face]"))
 450 SketchConstraintCoincidence_92 = Sketch_7.setCoincident(SketchLine_55.endPoint(), SketchPoint_7.result())
 451 SketchLine_56 = Sketch_7.addLine(45, -70, -45, -70)
 452 SketchLine_56.setName("SketchLine_67")
 453 SketchLine_56.result().setName("SketchLine_67")
 454 SketchLine_57 = Sketch_7.addLine(55, -70, -55, -70)
 455 SketchLine_57.setName("SketchLine_58")
 456 SketchLine_57.result().setName("SketchLine_58")
 457 SketchLine_57.setAuxiliary(True)
 458 SketchConstraintCoincidence_93 = Sketch_7.setCoincident(SketchLine_55.endPoint(), SketchLine_57.startPoint())
 459 SketchPoint_8 = Sketch_7.addPoint(model.selection("VERTEX", "[Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_10][Extrusion_8_1/From_Face]"))
 460 SketchConstraintCoincidence_94 = Sketch_7.setCoincident(SketchLine_57.endPoint(), SketchPoint_8.result())
 461 SketchLine_58 = Sketch_7.addLine(-55, -60, -55, -9.237604307034024)
 462 SketchLine_58.setName("SketchLine_68")
 463 SketchLine_58.result().setName("SketchLine_68")
 464 SketchLine_59 = Sketch_7.addLine(-55, -70, -55, -9.237604307034024)
 465 SketchLine_59.setName("SketchLine_59")
 466 SketchLine_59.result().setName("SketchLine_59")
 467 SketchLine_59.setAuxiliary(True)
 468 SketchConstraintCoincidence_95 = Sketch_7.setCoincident(SketchLine_57.endPoint(), SketchLine_59.startPoint())
 469 SketchPoint_9 = Sketch_7.addPoint(model.selection("VERTEX", "[Extrusion_8_1/Generated_Face&Sketch_1/SketchArc_2_2][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_10][Extrusion_8_1/From_Face]"))
 470 SketchConstraintCoincidence_96 = Sketch_7.setCoincident(SketchLine_59.endPoint(), SketchPoint_9.result())
 471 SketchLine_60 = Sketch_7.addLine(-55, -9.237604307034024, -60, -9.237604307034024)
 472 SketchLine_60.setName("SketchLine_60")
 473 SketchLine_60.result().setName("SketchLine_60")
 474 SketchConstraintCoincidence_97 = Sketch_7.setCoincident(SketchLine_59.endPoint(), SketchLine_60.startPoint())
 475 SketchLine_61 = Sketch_7.addLine(-60, -9.237604307034024, -60, -79.23760430703402)
 476 SketchLine_61.setName("SketchLine_61")
 477 SketchLine_61.result().setName("SketchLine_61")
 478 SketchConstraintCoincidence_98 = Sketch_7.setCoincident(SketchLine_60.endPoint(), SketchLine_61.startPoint())
 479 SketchLine_62 = Sketch_7.addLine(-60, -79.23760430703402, 60, -79.23760430703402)
 480 SketchLine_62.setName("SketchLine_62")
 481 SketchLine_62.result().setName("SketchLine_62")
 482 SketchConstraintCoincidence_99 = Sketch_7.setCoincident(SketchLine_61.endPoint(), SketchLine_62.startPoint())
 483 SketchLine_63 = Sketch_7.addLine(60, -79.23760430703402, 60, -9.237604307034024)
 484 SketchLine_63.setName("SketchLine_63")
 485 SketchLine_63.result().setName("SketchLine_63")
 486 SketchConstraintCoincidence_100 = Sketch_7.setCoincident(SketchLine_62.endPoint(), SketchLine_63.startPoint())
 487 SketchLine_64 = Sketch_7.addLine(60, -9.237604307034024, 55, -9.237604307034024)
 488 SketchLine_64.setName("SketchLine_64")
 489 SketchLine_64.result().setName("SketchLine_64")
 490 SketchConstraintCoincidence_101 = Sketch_7.setCoincident(SketchLine_63.endPoint(), SketchLine_64.startPoint())
 491 SketchConstraintCoincidence_102 = Sketch_7.setCoincident(SketchLine_55.startPoint(), SketchLine_64.endPoint())
 492 SketchConstraintCoincidence_103 = Sketch_7.setCoincident(SketchPoint_6.coordinates(), SketchLine_64.endPoint())
 493 SketchConstraintHorizontal_11 = Sketch_7.setHorizontal(SketchLine_64.result())
 494 SketchConstraintHorizontal_12 = Sketch_7.setHorizontal(SketchLine_60.result())
 495 SketchConstraintHorizontal_13 = Sketch_7.setHorizontal(SketchLine_62.result())
 496 SketchConstraintVertical_15 = Sketch_7.setVertical(SketchLine_61.result())
 497 SketchConstraintVertical_16 = Sketch_7.setVertical(SketchLine_63.result())
 498 SketchArc_13 = Sketch_7.addArc(45, -60, 45, -70, 55, -60, False)
 499 SketchArc_13.setName("SketchArc_14")
 500 SketchArc_13.result().setName("SketchArc_14")
 501 SketchArc_13.results()[1].setName("SketchArc_14_2")
 502 SketchLine_65 = Sketch_7.addLine(45, -70, -55, -70)
 503 SketchLine_65.setName("SketchLine_65")
 504 SketchLine_65.result().setName("SketchLine_65")
 505 SketchLine_65.setAuxiliary(True)
 506 SketchConstraintCoincidence_104 = Sketch_7.setCoincident(SketchArc_13.startPoint(), SketchLine_65.startPoint())
 507 SketchConstraintCoincidence_105 = Sketch_7.setCoincident(SketchArc_13.endPoint(), SketchLine_54.endPoint())
 508 SketchConstraintTangent_19 = Sketch_7.setTangent(SketchArc_13.results()[1], SketchLine_65.result())
 509 SketchConstraintTangent_20 = Sketch_7.setTangent(SketchArc_13.results()[1], SketchLine_54.result())
 510 SketchConstraintCoincidence_106 = Sketch_7.setCoincident(SketchLine_57.endPoint(), SketchLine_65.endPoint())
 511 SketchConstraintCoincidence_107 = Sketch_7.setCoincident(SketchLine_55.startPoint(), SketchLine_54.startPoint())
 512 SketchConstraintCoincidence_108 = Sketch_7.setCoincident(SketchLine_65.startPoint(), SketchLine_57.result())
 513 SketchConstraintCoincidence_109 = Sketch_7.setCoincident(SketchLine_54.endPoint(), SketchLine_55.result())
 514 SketchArc_14 = Sketch_7.addArc(-45, -60, -55, -60, -45, -70, False)
 515 SketchArc_14.setName("SketchArc_15")
 516 SketchArc_14.result().setName("SketchArc_15")
 517 SketchArc_14.results()[1].setName("SketchArc_15_2")
 518 SketchConstraintCoincidence_110 = Sketch_7.setCoincident(SketchArc_14.startPoint(), SketchLine_58.startPoint())
 519 SketchConstraintCoincidence_111 = Sketch_7.setCoincident(SketchArc_14.endPoint(), SketchLine_56.endPoint())
 520 SketchConstraintTangent_21 = Sketch_7.setTangent(SketchArc_14.results()[1], SketchLine_56.result())
 521 SketchConstraintTangent_22 = Sketch_7.setTangent(SketchArc_14.results()[1], SketchLine_58.result())
 522 SketchConstraintCoincidence_112 = Sketch_7.setCoincident(SketchLine_65.startPoint(), SketchLine_56.startPoint())
 523 SketchConstraintCoincidence_113 = Sketch_7.setCoincident(SketchLine_59.endPoint(), SketchLine_58.endPoint())
 524 SketchConstraintCoincidence_114 = Sketch_7.setCoincident(SketchLine_56.endPoint(), SketchLine_65.result())
 525 SketchConstraintCoincidence_115 = Sketch_7.setCoincident(SketchLine_58.startPoint(), SketchLine_59.result())
 526 SketchConstraintRadius_11 = Sketch_7.setRadius(SketchArc_13.results()[1], 10)
 527 SketchConstraintRadius_12 = Sketch_7.setRadius(SketchArc_14.results()[1], 10)
 528 SketchCircle_4 = Sketch_7.addCircle(44, -59, 5)
 529 SketchCircle_5 = Sketch_7.addCircle(-44, -59, 5)
 530 SketchConstraintRadius_13 = Sketch_7.setRadius(SketchCircle_4.results()[1], 5)
 531 SketchConstraintRadius_14 = Sketch_7.setRadius(SketchCircle_5.results()[1], 5)
 532 SketchConstraintDistance_27 = Sketch_7.setDistance(SketchCircle_4.center(), SketchLine_56.result(), 11, False)
 533 SketchConstraintDistance_28 = Sketch_7.setDistance(SketchCircle_4.center(), SketchLine_54.result(), 11, False)
 534 SketchConstraintDistance_29 = Sketch_7.setDistance(SketchCircle_5.center(), SketchLine_56.result(), 11, False)
 535 SketchConstraintDistance_30 = Sketch_7.setDistance(SketchCircle_5.center(), SketchLine_58.result(), 11, False)
 536 SketchCircle_6 = Sketch_7.addCircle(44, -20.23760430703402, 5)
 537 SketchConstraintRadius_15 = Sketch_7.setRadius(SketchCircle_6.results()[1], 5)
 538 SketchCircle_7 = Sketch_7.addCircle(-44, -20.23760430703402, 5)
 539 SketchConstraintRadius_16 = Sketch_7.setRadius(SketchCircle_7.results()[1], 5)
 540 SketchConstraintDistance_31 = Sketch_7.setDistance(SketchCircle_6.center(), SketchLine_54.result(), 11, False)
 541 SketchLine_66 = Sketch_7.addLine(model.selection("EDGE", "[Extrusion_8_1/Generated_Face&Sketch_1/SketchArc_2_2][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_10]"))
 542 SketchLine_66.setName("SketchLine_69")
 543 SketchLine_66.result().setName("SketchLine_69")
 544 SketchConstraintDistance_32 = Sketch_7.setDistance(SketchCircle_6.center(), SketchLine_66.result(), 11, False)
 545 SketchConstraintDistance_33 = Sketch_7.setDistance(SketchCircle_7.center(), SketchLine_58.result(), 11, False)
 546 SketchConstraintDistance_34 = Sketch_7.setDistance(SketchCircle_7.center(), SketchLine_66.result(), 11, False)
 547 SketchConstraintLength_2 = Sketch_7.setLength(SketchLine_62.result(), 120)
 548 SketchConstraintLength_3 = Sketch_7.setLength(SketchLine_61.result(), 70)
 549 SketchConstraintDistanceHorizontal_1 = Sketch_7.setHorizontalDistance(SketchPoint_7.coordinates(), SketchLine_62.endPoint(), 5)
 550 model.do()
 551 ExtrusionCut_1_objects_1 = [model.selection("WIRE", "Sketch_7/Face-SketchLine_66r-SketchArc_14_2r-SketchLine_67f-SketchArc_15_2r-SketchLine_68f-SketchLine_60f-SketchLine_61f-SketchLine_62f-SketchLine_63f-SketchLine_64f_wire"), model.selection("FACE", "Sketch_7/Face-SketchCircle_4_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_5_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_7_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_6_2f")]
 552 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_1_objects_1, model.selection(), 0, 10, [model.selection("SOLID", "Extrusion_8_1")])
 553 Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_11"))
 554 SketchLine_67 = Sketch_8.addLine(55, -34.06366588218793, 55, 66.69872981077805)
 555 SketchLine_67.setName("SketchLine_79")
 556 SketchLine_67.result().setName("SketchLine_79")
 557 SketchPoint_10 = Sketch_8.addPoint(model.selection("VERTEX", "[ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_2_2][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_11][(ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_2_2)(ExtrusionCut_1_1/Generated_Face&Sketch_7/SketchLine_66)(Extrusion_8_1/Generated_Face&Sketch_1/SketchArc_1_2)(Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_11)(Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_9)(Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_3)]"))
 558 SketchLine_68 = Sketch_8.addLine(55, -34.06366588218793, 55, 76.69872981077803)
 559 SketchLine_68.setName("SketchLine_70")
 560 SketchLine_68.result().setName("SketchLine_70")
 561 SketchLine_68.setAuxiliary(True)
 562 SketchConstraintCoincidence_116 = Sketch_8.setCoincident(SketchLine_68.startPoint(), SketchPoint_10.result())
 563 SketchPoint_11 = Sketch_8.addPoint(model.selection("VERTEX", "[Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_11][(ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_2_2)(ExtrusionCut_1_1/Generated_Face&Sketch_7/SketchLine_66)(Extrusion_8_1/Generated_Face&Sketch_1/SketchArc_1_2)(Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_11)(Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_9)(Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_3)][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_3]"))
 564 SketchConstraintCoincidence_117 = Sketch_8.setCoincident(SketchLine_68.endPoint(), SketchPoint_11.result())
 565 SketchLine_69 = Sketch_8.addLine(45, 76.69872981077805, -45, 76.69872981077805)
 566 SketchLine_69.setName("SketchLine_80")
 567 SketchLine_69.result().setName("SketchLine_80")
 568 SketchLine_70 = Sketch_8.addLine(55, 76.69872981077803, -55, 76.69872981077803)
 569 SketchLine_70.setName("SketchLine_71")
 570 SketchLine_70.result().setName("SketchLine_71")
 571 SketchLine_70.setAuxiliary(True)
 572 SketchConstraintCoincidence_118 = Sketch_8.setCoincident(SketchLine_68.endPoint(), SketchLine_70.startPoint())
 573 SketchPoint_12 = Sketch_8.addPoint(model.selection("VERTEX", "[(ExtrusionCut_1_1/Generated_Face&Sketch_7/SketchLine_68)(ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_2_2)(Extrusion_8_1/Generated_Face&Sketch_1/SketchArc_1_2)(Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_11)(Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_9)(Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_3)][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_11][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_3]"))
 574 SketchConstraintCoincidence_119 = Sketch_8.setCoincident(SketchLine_70.endPoint(), SketchPoint_12.result())
 575 SketchLine_71 = Sketch_8.addLine(-55, 66.69872976783566, -55, -34.06366588218793)
 576 SketchLine_71.setName("SketchLine_81")
 577 SketchLine_71.result().setName("SketchLine_81")
 578 SketchLine_72 = Sketch_8.addLine(-55, 76.69872981077803, -55, -34.06366588218793)
 579 SketchLine_72.setName("SketchLine_72")
 580 SketchLine_72.result().setName("SketchLine_72")
 581 SketchLine_72.setAuxiliary(True)
 582 SketchConstraintCoincidence_120 = Sketch_8.setCoincident(SketchLine_70.endPoint(), SketchLine_72.startPoint())
 583 SketchPoint_13 = Sketch_8.addPoint(model.selection("VERTEX", "[ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_2_2][(ExtrusionCut_1_1/Generated_Face&Sketch_7/SketchLine_68)(ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_2_2)(Extrusion_8_1/Generated_Face&Sketch_1/SketchArc_1_2)(Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_11)(Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_9)(Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_3)][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_11]"))
 584 SketchConstraintCoincidence_121 = Sketch_8.setCoincident(SketchLine_72.endPoint(), SketchPoint_13.result())
 585 SketchLine_73 = Sketch_8.addLine(-55, -34.06366588218793, -83.25521566485324, -34.06366588218793)
 586 SketchLine_73.setName("SketchLine_73")
 587 SketchLine_73.result().setName("SketchLine_73")
 588 SketchConstraintCoincidence_122 = Sketch_8.setCoincident(SketchLine_72.endPoint(), SketchLine_73.startPoint())
 589 SketchLine_74 = Sketch_8.addLine(-83.25521566485324, -34.06366588218793, -83.25521566485298, 92.00148393088952)
 590 SketchLine_74.setName("SketchLine_74")
 591 SketchLine_74.result().setName("SketchLine_74")
 592 SketchConstraintCoincidence_123 = Sketch_8.setCoincident(SketchLine_73.endPoint(), SketchLine_74.startPoint())
 593 SketchLine_75 = Sketch_8.addLine(-83.25521566485298, 92.00148393088952, 87.50975635635101, 92.00148393088952)
 594 SketchLine_75.setName("SketchLine_75")
 595 SketchLine_75.result().setName("SketchLine_75")
 596 SketchConstraintCoincidence_124 = Sketch_8.setCoincident(SketchLine_74.endPoint(), SketchLine_75.startPoint())
 597 SketchLine_76 = Sketch_8.addLine(87.50975635635101, 92.00148393088952, 87.50975635635101, -34.06366588218793)
 598 SketchLine_76.setName("SketchLine_76")
 599 SketchLine_76.result().setName("SketchLine_76")
 600 SketchConstraintCoincidence_125 = Sketch_8.setCoincident(SketchLine_75.endPoint(), SketchLine_76.startPoint())
 601 SketchLine_77 = Sketch_8.addLine(87.50975635635101, -34.06366588218793, 55, -34.06366588218793)
 602 SketchLine_77.setName("SketchLine_77")
 603 SketchLine_77.result().setName("SketchLine_77")
 604 SketchConstraintCoincidence_126 = Sketch_8.setCoincident(SketchLine_76.endPoint(), SketchLine_77.startPoint())
 605 SketchConstraintCoincidence_127 = Sketch_8.setCoincident(SketchLine_68.startPoint(), SketchLine_77.endPoint())
 606 SketchConstraintCoincidence_128 = Sketch_8.setCoincident(SketchPoint_10.coordinates(), SketchLine_77.endPoint())
 607 SketchConstraintHorizontal_14 = Sketch_8.setHorizontal(SketchLine_77.result())
 608 SketchConstraintHorizontal_15 = Sketch_8.setHorizontal(SketchLine_73.result())
 609 SketchConstraintHorizontal_16 = Sketch_8.setHorizontal(SketchLine_75.result())
 610 SketchConstraintVertical_17 = Sketch_8.setVertical(SketchLine_74.result())
 611 SketchConstraintVertical_18 = Sketch_8.setVertical(SketchLine_76.result())
 612 SketchArc_15 = Sketch_8.addArc(45, 66.69872981077805, 55, 66.69872981077805, 45, 76.69872981077805, False)
 613 SketchArc_15.setName("SketchArc_16")
 614 SketchArc_15.result().setName("SketchArc_16")
 615 SketchArc_15.results()[1].setName("SketchArc_16_2")
 616 SketchConstraintCoincidence_129 = Sketch_8.setCoincident(SketchArc_15.startPoint(), SketchLine_67.endPoint())
 617 SketchLine_78 = Sketch_8.addLine(45, 76.69872981077805, -55, 76.69872981077803)
 618 SketchLine_78.setName("SketchLine_78")
 619 SketchLine_78.result().setName("SketchLine_78")
 620 SketchLine_78.setAuxiliary(True)
 621 SketchConstraintCoincidence_130 = Sketch_8.setCoincident(SketchArc_15.endPoint(), SketchLine_78.startPoint())
 622 SketchConstraintTangent_23 = Sketch_8.setTangent(SketchArc_15.results()[1], SketchLine_78.result())
 623 SketchConstraintTangent_24 = Sketch_8.setTangent(SketchArc_15.results()[1], SketchLine_67.result())
 624 SketchConstraintCoincidence_131 = Sketch_8.setCoincident(SketchLine_70.endPoint(), SketchLine_78.endPoint())
 625 SketchConstraintCoincidence_132 = Sketch_8.setCoincident(SketchLine_68.startPoint(), SketchLine_67.startPoint())
 626 SketchConstraintCoincidence_133 = Sketch_8.setCoincident(SketchLine_78.startPoint(), SketchLine_70.result())
 627 SketchConstraintCoincidence_134 = Sketch_8.setCoincident(SketchLine_67.endPoint(), SketchLine_68.result())
 628 SketchArc_16 = Sketch_8.addArc(-45, 66.69872976783566, -45, 76.69872981077805, -55, 66.69872976783566, False)
 629 SketchArc_16.setName("SketchArc_17")
 630 SketchArc_16.result().setName("SketchArc_17")
 631 SketchArc_16.results()[1].setName("SketchArc_17_2")
 632 SketchConstraintCoincidence_135 = Sketch_8.setCoincident(SketchArc_16.startPoint(), SketchLine_69.endPoint())
 633 SketchConstraintCoincidence_136 = Sketch_8.setCoincident(SketchArc_16.endPoint(), SketchLine_71.startPoint())
 634 SketchConstraintTangent_25 = Sketch_8.setTangent(SketchArc_16.results()[1], SketchLine_69.result())
 635 SketchConstraintTangent_26 = Sketch_8.setTangent(SketchArc_16.results()[1], SketchLine_71.result())
 636 SketchConstraintCoincidence_137 = Sketch_8.setCoincident(SketchLine_78.startPoint(), SketchLine_69.startPoint())
 637 SketchConstraintCoincidence_138 = Sketch_8.setCoincident(SketchLine_72.endPoint(), SketchLine_71.endPoint())
 638 SketchConstraintCoincidence_139 = Sketch_8.setCoincident(SketchLine_69.endPoint(), SketchLine_78.result())
 639 SketchConstraintCoincidence_140 = Sketch_8.setCoincident(SketchLine_71.startPoint(), SketchLine_72.result())
 640 SketchConstraintRadius_17 = Sketch_8.setRadius(SketchArc_15.results()[1], 10)
 641 SketchConstraintRadius_18 = Sketch_8.setRadius(SketchArc_16.results()[1], 10)
 642 SketchCircle_8 = Sketch_8.addCircle(-44, 51.69872981077802, 5)
 643 SketchConstraintRadius_19 = Sketch_8.setRadius(SketchCircle_8.results()[1], 5)
 644 SketchConstraintDistance_35 = Sketch_8.setDistance(SketchCircle_8.center(), SketchLine_69.result(), 25, False)
 645 SketchConstraintDistance_36 = Sketch_8.setDistance(SketchCircle_8.center(), SketchLine_71.result(), 11, False)
 646 SketchCircle_9 = Sketch_8.addCircle(-44, 16.69872981077805, 5)
 647 SketchConstraintRadius_20 = Sketch_8.setRadius(SketchCircle_9.results()[1], 5)
 648 SketchConstraintDistance_37 = Sketch_8.setDistance(SketchCircle_9.center(), SketchLine_71.result(), 11, False)
 649 SketchConstraintDistance_38 = Sketch_8.setDistance(SketchCircle_9.center(), SketchLine_69.result(), 60, False)
 650 SketchArc_17 = Sketch_8.addArc(44, 16.69872981077805, 49, 16.69872981077805, 39, 16.69872981077805, True)
 651 SketchArc_17.setName("SketchArc_19")
 652 SketchArc_17.result().setName("SketchArc_19")
 653 SketchArc_17.results()[1].setName("SketchArc_19_2")
 654 SketchConstraintRadius_21 = Sketch_8.setRadius(SketchArc_17.results()[1], 5)
 655 SketchConstraintDistance_39 = Sketch_8.setDistance(SketchArc_17.center(), SketchLine_69.result(), 60, False)
 656 SketchArc_18 = Sketch_8.addArc(44, 51.69872981077805, 49, 51.69872981077805, 39, 51.69872981077805, False)
 657 SketchArc_18.setName("SketchArc_18")
 658 SketchArc_18.result().setName("SketchArc_18")
 659 SketchArc_18.results()[1].setName("SketchArc_18_2")
 660 SketchLine_79 = Sketch_8.addLine(49, 16.69872981077805, 49, 51.69872981077805)
 661 SketchLine_79.setName("SketchLine_82")
 662 SketchLine_79.result().setName("SketchLine_82")
 663 SketchConstraintCoincidence_141 = Sketch_8.setCoincident(SketchArc_18.startPoint(), SketchLine_79.endPoint())
 664 SketchConstraintCoincidence_142 = Sketch_8.setCoincident(SketchLine_79.startPoint(), SketchArc_17.startPoint())
 665 SketchLine_80 = Sketch_8.addLine(39, 16.69872981077805, 39, 51.69872981077805)
 666 SketchLine_80.setName("SketchLine_83")
 667 SketchLine_80.result().setName("SketchLine_83")
 668 SketchConstraintCoincidence_143 = Sketch_8.setCoincident(SketchArc_17.endPoint(), SketchLine_80.startPoint())
 669 SketchConstraintCoincidence_144 = Sketch_8.setCoincident(SketchArc_18.endPoint(), SketchLine_80.endPoint())
 670 SketchConstraintDistance_40 = Sketch_8.setDistance(SketchArc_17.center(), SketchLine_67.result(), 11, False)
 671 SketchConstraintDistance_41 = Sketch_8.setDistance(SketchLine_69.result(), SketchArc_18.center(), 25, False)
 672 SketchConstraintDistance_42 = Sketch_8.setDistance(SketchArc_18.center(), SketchLine_67.result(), 11, False)
 673 SketchConstraintRadius_22 = Sketch_8.setRadius(SketchArc_18.results()[1], 5)
 674 SketchConstraintLength_4 = Sketch_8.setLength(SketchLine_80.result(), 35.000000440932)
 675 SketchConstraintLength_5 = Sketch_8.setLength(SketchLine_79.result(), 35)
 676 SketchConstraintLength_6 = Sketch_8.setLength(SketchLine_75.result(), 170.764972021204)
 677 SketchConstraintLength_7 = Sketch_8.setLength(SketchLine_77.result(), 32.509756356351)
 678 SketchConstraintLength_8 = Sketch_8.setLength(SketchLine_76.result(), 126.065149813077)
 679 SketchConstraintDistance_43 = Sketch_8.setDistance(SketchArc_18.endPoint(), SketchLine_69.result(), 24.999999559068, False)
 680 SketchConstraintDistance_44 = Sketch_8.setDistance(SketchArc_18.startPoint(), SketchLine_69.result(), 25, False)
 681 model.do()
 682 ExtrusionCut_2_objects_1 = [model.selection("FACE", "Sketch_8/Face-SketchLine_77r-SketchLine_76r-SketchLine_75r-SketchLine_74r-SketchLine_73r-SketchLine_81r-SketchArc_17_2r-SketchLine_80r-SketchArc_16_2r-SketchLine_79r"), model.selection("WIRE", "Sketch_8/Face-SketchCircle_8_2f_wire"), model.selection("WIRE", "Sketch_8/Face-SketchCircle_9_2f_wire"), model.selection("WIRE", "Sketch_8/Face-SketchArc_19_2f-SketchLine_82f-SketchArc_18_2f-SketchLine_83r_wire")]
 683 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_2_objects_1, model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_1_1")])
 684 Fuse_3 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Cut_1_1")], [model.selection("SOLID", "ExtrusionCut_2_1")])
 685 model.do()
 686
 687 # Test reexecution after parameter change
 688 Parameter_H.setValue(8)
 689 model.do()
 690 model.testResultsVolumes(Fuse_3, [169754.898488585400627925992012024])
 691 Parameter_H.setValue(6)
 692 model.end()
 693
 694 from GeomAPI import GeomAPI_Shape
 695
 696 model.testNbResults(Fuse_3, 1)
 697 model.testNbSubResults(Fuse_3, [0])
 698 model.testNbSubShapes(Fuse_3, GeomAPI_Shape.SOLID, [1])
 699 model.testNbSubShapes(Fuse_3, GeomAPI_Shape.FACE, [50])
 700 # unstable numbers
 701 #model.testNbSubShapes(Fuse_3, GeomAPI_Shape.EDGE, [266])
 702 #model.testNbSubShapes(Fuse_3, GeomAPI_Shape.VERTEX, [532])
 703 model.testResultsVolumes(Fuse_3, [156999.196618517889874055981636])
 704
 705 assert(model.checkPythonDump())