test.models/angle30.py

   1 from salome.shaper import model
   2
   3 model.begin()
   4 partSet = model.moduleDocument()
   5 Part_1 = model.addPart(partSet)
   6 Part_1_doc = Part_1.document()
   7 Parameter_H = model.addParameter(Part_1_doc, "H", "6")
   8 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
   9 SketchLine_1 = Sketch_1.addLine(50, 70, 50, 9.237604307034024)
  10 SketchLine_1.setName("SketchLine_10")
  11 SketchLine_1.result().setName("SketchLine_10")
  12 SketchLine_2 = Sketch_1.addLine(42, -4.618802153516998, -53.92304845413265, -59.99999999999996)
  13 SketchLine_2.setName("SketchLine_11")
  14 SketchLine_2.result().setName("SketchLine_11")
  15 SketchLine_3 = Sketch_1.addLine(50, 70, 50, 0)
  16 SketchLine_3.setName("SketchLine_1")
  17 SketchLine_3.result().setName("SketchLine_1")
  18 SketchLine_3.setAuxiliary(True)
  19 SketchLine_4 = Sketch_1.addLine(50, 0, -53.92304845413265, -59.99999999999996)
  20 SketchLine_4.setName("SketchLine_2")
  21 SketchLine_4.result().setName("SketchLine_2")
  22 SketchLine_4.setAuxiliary(True)
  23 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  24 SketchLine_5 = Sketch_1.addLine(44, 9.237604307034236, 44, 70)
  25 SketchLine_5.setName("SketchLine_8")
  26 SketchLine_5.result().setName("SketchLine_8")
  27 SketchLine_6 = Sketch_1.addLine(-53.92304845413265, -59.99999999999996, -56.92304845413265, -54.80384757729332)
  28 SketchLine_6.setName("SketchLine_3")
  29 SketchLine_6.result().setName("SketchLine_3")
  30 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_6.startPoint())
  31 SketchLine_7 = Sketch_1.addLine(-56.92304845413265, -54.80384757729332, 39.00000000000029, 0.5773502691898111)
  32 SketchLine_7.setName("SketchLine_9")
  33 SketchLine_7.result().setName("SketchLine_9")
  34 SketchLine_8 = Sketch_1.addLine(-56.92304845413265, -54.80384757729332, 44, 3.464101615137769)
  35 SketchLine_8.setName("SketchLine_4")
  36 SketchLine_8.result().setName("SketchLine_4")
  37 SketchLine_8.setAuxiliary(True)
  38 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_8.startPoint())
  39 SketchLine_9 = Sketch_1.addLine(44, 3.464101615137769, 44, 70)
  40 SketchLine_9.setName("SketchLine_5")
  41 SketchLine_9.result().setName("SketchLine_5")
  42 SketchLine_9.setAuxiliary(True)
  43 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  44 SketchLine_10 = Sketch_1.addLine(44, 70, 50, 70)
  45 SketchLine_10.setName("SketchLine_6")
  46 SketchLine_10.result().setName("SketchLine_6")
  47 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
  48 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchLine_10.endPoint())
  49 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_3.result())
  50 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_9.result())
  51 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_10.result())
  52 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_3.startPoint(), SketchLine_9.result(), "H")
  53 SketchLine_11 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OZ"))
  54 SketchLine_11.setName("SketchLine_7")
  55 SketchLine_11.result().setName("SketchLine_7")
  56 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_3.startPoint(), SketchLine_11.result(), 50)
  57 SketchArc_1 = Sketch_1.addArc(34, 9.237604307034236, 39.00000000000029, 0.5773502691898111, 44, 9.237604307034236, False)
  58 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_7.endPoint())
  59 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_5.startPoint())
  60 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_5.result())
  61 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_7.result())
  62 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_5.endPoint())
  63 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_8.startPoint(), SketchLine_7.startPoint())
  64 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_9.result())
  65 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.result())
  66 SketchArc_2 = Sketch_1.addArc(34, 9.237604307034022, 42, -4.618802153516998, 50, 9.237604307034024, False)
  67 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_2.startPoint())
  68 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_1.endPoint())
  69 SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_1.result())
  70 SketchConstraintTangent_4 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_2.result())
  71 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchLine_1.startPoint())
  72 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_2.endPoint())
  73 SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_3.result())
  74 SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchLine_4.result())
  75 SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_1.startPoint(), SketchLine_4.startPoint(), 70)
  76 SketchConstraintPerpendicular_1 = Sketch_1.setPerpendicular(SketchLine_2.result(), SketchLine_6.result())
  77 SketchConstraintDistance_4 = Sketch_1.setDistance(SketchLine_6.endPoint(), SketchLine_2.result(), 6)
  78 SketchConstraintParallel_1 = Sketch_1.setParallel(SketchLine_2.result(), SketchLine_7.result())
  79 SketchConstraintAngle_1 = Sketch_1.setAngle(SketchLine_1.result(), SketchLine_2.result(), 119.9999999999999)
  80 SketchConstraintDistance_5 = Sketch_1.setDistance(SketchLine_4.startPoint(), SketchLine_6.startPoint(), 120)
  81 SketchLine_12 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OY"))
  82 SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchLine_4.startPoint(), SketchLine_12.result())
  83 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_2.results()[1], 16)
  84 SketchConstraintRadius_1.setName("SketchConstraintRadius_3")
  85 SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_1.results()[1], 10)
  86 SketchConstraintRadius_2.setName("SketchConstraintRadius_4")
  87 model.do()
  88 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  89 SketchCircle_1 = Sketch_2.addCircle(0, 0, 17.5)
  90 SketchPoint_1 = Sketch_2.addPoint(model.selection("VERTEX", "PartSet/Origin"))
  91 SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchCircle_1.center(), SketchPoint_1.result())
  92 SketchConstraintRadius_3 = Sketch_2.setRadius(SketchCircle_1.results()[1], 17.5)
  93 SketchConstraintRadius_3.setName("SketchConstraintRadius_1")
  94 SketchCircle_2 = Sketch_2.addCircle(0, 0, 14.5)
  95 SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchCircle_1.center(), SketchCircle_2.center())
  96 SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchPoint_1.coordinates(), SketchCircle_2.center())
  97 SketchConstraintRadius_4 = Sketch_2.setRadius(SketchCircle_2.results()[1], 14.5)
  98 SketchConstraintRadius_4.setName("SketchConstraintRadius_2")
  99 model.do()
 100 Sketch_3 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
 101 SketchLine_13 = Sketch_3.addLine(-22, 70, -22, -35.79571668975675)
 102 SketchLine_14 = Sketch_3.addLine(-22, -35.79571668975675, 55, 8.660254037844405)
 103 SketchConstraintCoincidence_23 = Sketch_3.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
 104 SketchLine_15 = Sketch_3.addLine(55, 8.660254037844405, 55, 70)
 105 SketchConstraintCoincidence_24 = Sketch_3.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
 106 SketchLine_16 = Sketch_3.addLine(55, 70, -22, 70)
 107 SketchConstraintCoincidence_25 = Sketch_3.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint())
 108 SketchConstraintCoincidence_26 = Sketch_3.setCoincident(SketchLine_13.startPoint(), SketchLine_16.endPoint())
 109 SketchConstraintHorizontal_2 = Sketch_3.setHorizontal(SketchLine_16.result())
 110 SketchConstraintVertical_3 = Sketch_3.setVertical(SketchLine_15.result())
 111 SketchConstraintVertical_4 = Sketch_3.setVertical(SketchLine_13.result())
 112 SketchLine_17 = Sketch_3.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"))
 113 SketchConstraintParallel_2 = Sketch_3.setParallel(SketchLine_14.result(), SketchLine_17.result())
 114 SketchConstraintDistance_6 = Sketch_3.setDistance(SketchLine_14.endPoint(), SketchLine_17.result(), 1)
 115 SketchLine_18 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OZ"))
 116 SketchConstraintDistance_7 = Sketch_3.setDistance(SketchLine_16.startPoint(), SketchLine_18.result(), 55)
 117 SketchConstraintDistance_8 = Sketch_3.setDistance(SketchLine_13.startPoint(), SketchLine_18.result(), 22)
 118 SketchLine_19 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OY"))
 119 SketchConstraintDistance_9 = Sketch_3.setDistance(SketchLine_15.endPoint(), SketchLine_19.result(), 70)
 120 model.do()
 121 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_1_2f")], model.selection(), 75, 45)
 122 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 22, 22)
 123 Boolean_1 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
 124 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOY"))
 125 SketchLine_20 = Sketch_4.addLine(-4, 38.00000000000001, -4, 21.26617031813674)
 126 SketchLine_20.setName("SketchLine_36")
 127 SketchLine_20.result().setName("SketchLine_36")
 128 SketchArc_3 = Sketch_4.addArc(0, 0, -8.5, 15.2970585407786, -7.446808510638298, 15.83650981137842, True)
 129 SketchArc_3.setName("SketchArc_6")
 130 SketchArc_3.result().setName("SketchArc_6")
 131 SketchArc_3.results()[1].setName("SketchArc_6_2")
 132 SketchArc_4 = Sketch_4.addArc(0, 0, 7.446808510638299, 15.83650981137842, 8.5, 15.29705854077835, True)
 133 SketchArc_4.setName("SketchArc_8")
 134 SketchArc_4.result().setName("SketchArc_8")
 135 SketchArc_4.results()[1].setName("SketchArc_8_2")
 136 SketchLine_21 = Sketch_4.addLine(4, 21.26617031813674, 4, 37.99999998819019)
 137 SketchLine_21.setName("SketchLine_38")
 138 SketchLine_21.result().setName("SketchLine_38")
 139 SketchLine_22 = Sketch_4.addLine(-8.5, 15.2970585407786, -8.499999999999998, 12)
 140 SketchLine_23 = Sketch_4.addLine(-10.1, 44.00000000000001, -9.999999999999854, 44.00000000000001)
 141 SketchLine_23.setName("SketchLine_37")
 142 SketchLine_23.result().setName("SketchLine_37")
 143 SketchLine_24 = Sketch_4.addLine(9.99999999990029, 43.99999998819102, 10.1, 44)
 144 SketchLine_24.setName("SketchLine_39")
 145 SketchLine_24.result().setName("SketchLine_39")
 146 SketchLine_25 = Sketch_4.addLine(8.5, 12, 8.5, 15.29705854077835)
 147 SketchLine_25.setName("SketchLine_24")
 148 SketchLine_25.result().setName("SketchLine_24")
 149 SketchLine_26 = Sketch_4.addLine(4, 44.00000000000001, 10.1, 44)
 150 SketchLine_26.setAuxiliary(True)
 151 SketchLine_27 = Sketch_4.addLine(4, 17.03672503740084, 4, 44.00000000000001)
 152 SketchLine_27.setAuxiliary(True)
 153 SketchConstraintCoincidence_27 = Sketch_4.setCoincident(SketchLine_27.endPoint(), SketchLine_26.startPoint())
 154 SketchConstraintCoincidence_27.setName("SketchConstraintCoincidence_33")
 155 SketchLine_28 = Sketch_4.addLine(10.1, 44, 10.1, 45.00000000000001)
 156 SketchConstraintCoincidence_28 = Sketch_4.setCoincident(SketchLine_26.endPoint(), SketchLine_28.startPoint())
 157 SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_34")
 158 SketchLine_29 = Sketch_4.addLine(10.1, 45.00000000000001, -10.1, 45)
 159 SketchConstraintCoincidence_29 = Sketch_4.setCoincident(SketchLine_28.endPoint(), SketchLine_29.startPoint())
 160 SketchConstraintCoincidence_29.setName("SketchConstraintCoincidence_35")
 161 SketchLine_30 = Sketch_4.addLine(-10.1, 45, -10.1, 44.00000000000001)
 162 SketchConstraintCoincidence_30 = Sketch_4.setCoincident(SketchLine_29.endPoint(), SketchLine_30.startPoint())
 163 SketchConstraintCoincidence_30.setName("SketchConstraintCoincidence_36")
 164 SketchLine_31 = Sketch_4.addLine(-10.1, 44.00000000000001, -4, 44.00000000000001)
 165 SketchLine_31.setAuxiliary(True)
 166 SketchConstraintCoincidence_31 = Sketch_4.setCoincident(SketchLine_30.endPoint(), SketchLine_31.startPoint())
 167 SketchConstraintCoincidence_31.setName("SketchConstraintCoincidence_37")
 168 SketchLine_32 = Sketch_4.addLine(-4, 44.00000000000001, -4.000000000000001, 17.03672503740078)
 169 SketchLine_32.setName("SketchLine_20")
 170 SketchLine_32.result().setName("SketchLine_20")
 171 SketchLine_32.setAuxiliary(True)
 172 SketchConstraintCoincidence_32 = Sketch_4.setCoincident(SketchLine_32.startPoint(), SketchLine_31.endPoint())
 173 SketchConstraintCoincidence_32.setName("SketchConstraintCoincidence_38")
 174 SketchConstraintVertical_5 = Sketch_4.setVertical(SketchLine_32.result())
 175 SketchConstraintVertical_6 = Sketch_4.setVertical(SketchLine_27.result())
 176 SketchConstraintHorizontal_3 = Sketch_4.setHorizontal(SketchLine_29.result())
 177 SketchConstraintHorizontal_4 = Sketch_4.setHorizontal(SketchLine_31.result())
 178 SketchConstraintHorizontal_5 = Sketch_4.setHorizontal(SketchLine_26.result())
 179 SketchConstraintVertical_7 = Sketch_4.setVertical(SketchLine_30.result())
 180 SketchConstraintVertical_8 = Sketch_4.setVertical(SketchLine_28.result())
 181 SketchConstraintVertical_9 = Sketch_4.setVertical(SketchLine_25.result())
 182 SketchConstraintVertical_10 = Sketch_4.setVertical(SketchLine_22.result())
 183 SketchLine_33 = Sketch_4.addLine(model.selection("EDGE", "PartSet/OY"))
 184 SketchLine_33.setName("SketchLine_32")
 185 SketchLine_33.result().setName("SketchLine_32")
 186 SketchConstraintDistance_10 = Sketch_4.setDistance(SketchLine_22.startPoint(), SketchLine_32.result(), 4.5)
 187 SketchConstraintDistance_10.setName("SketchConstraintDistance_13")
 188 SketchLine_34 = Sketch_4.addLine(-8.499999999999998, 12, 8.5, 12)
 189 SketchLine_34.setName("SketchLine_33")
 190 SketchLine_34.result().setName("SketchLine_33")
 191 SketchConstraintCoincidence_33 = Sketch_4.setCoincident(SketchLine_22.endPoint(), SketchLine_34.startPoint())
 192 SketchConstraintCoincidence_33.setName("SketchConstraintCoincidence_39")
 193 SketchConstraintHorizontal_6 = Sketch_4.setHorizontal(SketchLine_34.result())
 194 SketchPoint_2 = Sketch_4.addPoint(model.selection("VERTEX", "PartSet/Origin"))
 195 SketchArc_5 = Sketch_4.addArc(-1.190531714553335e-011, 2.149585003540736e-011, -8.5, 15.2970585407786, -4.000000000000001, 17.03672503740078, True)
 196 SketchArc_5.setName("SketchArc_4")
 197 SketchArc_5.result().setName("SketchArc_4")
 198 SketchArc_5.results()[1].setName("SketchArc_4_2")
 199 SketchArc_5.setAuxiliary(True)
 200 SketchConstraintCoincidence_34 = Sketch_4.setCoincident(SketchLine_22.startPoint(), SketchArc_5.startPoint())
 201 SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_41")
 202 SketchArc_6 = Sketch_4.addArc(-2.234785556504386e-013, -4.022299956989981e-013, 4, 17.03672503740084, 8.5, 15.29705854077835, True)
 203 SketchArc_6.setName("SketchArc_5")
 204 SketchArc_6.result().setName("SketchArc_5")
 205 SketchArc_6.results()[1].setName("SketchArc_5_2")
 206 SketchArc_6.setAuxiliary(True)
 207 SketchConstraintCoincidence_35 = Sketch_4.setCoincident(SketchLine_25.endPoint(), SketchArc_6.endPoint())
 208 SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_42")
 209 SketchPoint_3 = Sketch_4.addPoint(-4.000000000000001, 17.03672503740078)
 210 SketchPoint_4 = Sketch_4.addPoint(4, 17.03672503740084)
 211 SketchConstraintCoincidence_36 = Sketch_4.setCoincident(SketchArc_5.endPoint(), SketchPoint_3.coordinates())
 212 SketchConstraintCoincidence_36.setName("SketchConstraintCoincidence_46")
 213 SketchConstraintCoincidence_37 = Sketch_4.setCoincident(SketchArc_6.startPoint(), SketchPoint_4.coordinates())
 214 SketchConstraintCoincidence_37.setName("SketchConstraintCoincidence_48")
 215 SketchConstraintCoincidence_38 = Sketch_4.setCoincident(SketchArc_5.endPoint(), SketchLine_32.endPoint())
 216 SketchConstraintCoincidence_38.setName("SketchConstraintCoincidence_40")
 217 SketchConstraintCoincidence_39 = Sketch_4.setCoincident(SketchPoint_4.coordinates(), SketchLine_27.startPoint())
 218 SketchConstraintCoincidence_39.setName("SketchConstraintCoincidence_43")
 219 SketchArc_7 = Sketch_4.addArc(-10, 21.26617031813674, -7.446808510638298, 15.83650981137842, -4, 21.26617031813674, False)
 220 SketchConstraintCoincidence_40 = Sketch_4.setCoincident(SketchArc_7.startPoint(), SketchArc_3.endPoint())
 221 SketchConstraintCoincidence_40.setName("SketchConstraintCoincidence_44")
 222 SketchLine_35 = Sketch_4.addLine(-4, 44.00000000000001, -4, 21.26617031813674)
 223 SketchLine_35.setName("SketchLine_34")
 224 SketchLine_35.result().setName("SketchLine_34")
 225 SketchLine_35.setAuxiliary(True)
 226 SketchConstraintCoincidence_41 = Sketch_4.setCoincident(SketchArc_7.endPoint(), SketchLine_35.endPoint())
 227 SketchConstraintCoincidence_41.setName("SketchConstraintCoincidence_45")
 228 SketchConstraintTangent_5 = Sketch_4.setTangent(SketchArc_7.results()[1], SketchLine_35.result())
 229 SketchConstraintTangent_6 = Sketch_4.setTangent(SketchArc_7.results()[1], SketchArc_3.results()[1])
 230 SketchConstraintCoincidence_42 = Sketch_4.setCoincident(SketchLine_32.startPoint(), SketchLine_35.startPoint())
 231 SketchConstraintCoincidence_42.setName("SketchConstraintCoincidence_47")
 232 SketchConstraintCoincidence_43 = Sketch_4.setCoincident(SketchArc_5.startPoint(), SketchArc_3.startPoint())
 233 SketchConstraintCoincidence_43.setName("SketchConstraintCoincidence_49")
 234 SketchConstraintTangent_7 = Sketch_4.setTangent(SketchArc_5.results()[1], SketchArc_3.results()[1])
 235 SketchConstraintCoincidence_44 = Sketch_4.setCoincident(SketchLine_35.endPoint(), SketchLine_32.result())
 236 SketchConstraintCoincidence_44.setName("SketchConstraintCoincidence_50")
 237 SketchConstraintCoincidence_45 = Sketch_4.setCoincident(SketchArc_3.endPoint(), SketchArc_5.results()[1])
 238 SketchConstraintCoincidence_45.setName("SketchConstraintCoincidence_51")
 239 SketchArc_8 = Sketch_4.addArc(10, 21.26617031813674, 4, 21.26617031813674, 7.446808510638299, 15.83650981137842, False)
 240 SketchArc_8.setName("SketchArc_9")
 241 SketchArc_8.result().setName("SketchArc_9")
 242 SketchArc_8.results()[1].setName("SketchArc_9_2")
 243 SketchLine_36 = Sketch_4.addLine(4, 21.26617031813674, 4, 44.00000000000001)
 244 SketchLine_36.setName("SketchLine_35")
 245 SketchLine_36.result().setName("SketchLine_35")
 246 SketchLine_36.setAuxiliary(True)
 247 SketchConstraintCoincidence_46 = Sketch_4.setCoincident(SketchArc_8.startPoint(), SketchLine_36.startPoint())
 248 SketchConstraintCoincidence_46.setName("SketchConstraintCoincidence_52")
 249 SketchConstraintCoincidence_47 = Sketch_4.setCoincident(SketchArc_8.endPoint(), SketchArc_4.startPoint())
 250 SketchConstraintCoincidence_47.setName("SketchConstraintCoincidence_53")
 251 SketchConstraintTangent_8 = Sketch_4.setTangent(SketchArc_8.results()[1], SketchArc_4.results()[1])
 252 SketchConstraintTangent_9 = Sketch_4.setTangent(SketchArc_8.results()[1], SketchLine_36.result())
 253 SketchConstraintCoincidence_48 = Sketch_4.setCoincident(SketchArc_6.endPoint(), SketchArc_4.endPoint())
 254 SketchConstraintCoincidence_48.setName("SketchConstraintCoincidence_54")
 255 SketchConstraintCoincidence_49 = Sketch_4.setCoincident(SketchLine_27.endPoint(), SketchLine_36.endPoint())
 256 SketchConstraintCoincidence_49.setName("SketchConstraintCoincidence_55")
 257 SketchConstraintTangent_10 = Sketch_4.setTangent(SketchArc_6.results()[1], SketchArc_4.results()[1])
 258 SketchConstraintCoincidence_50 = Sketch_4.setCoincident(SketchArc_4.startPoint(), SketchArc_6.results()[1])
 259 SketchConstraintCoincidence_50.setName("SketchConstraintCoincidence_56")
 260 SketchConstraintCoincidence_51 = Sketch_4.setCoincident(SketchLine_36.startPoint(), SketchLine_27.result())
 261 SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_57")
 262 SketchConstraintCoincidence_52 = Sketch_4.setCoincident(SketchLine_25.startPoint(), SketchLine_34.endPoint())
 263 SketchConstraintCoincidence_52.setName("SketchConstraintCoincidence_58")
 264 SketchCircle_3 = Sketch_4.addCircle(model.selection("EDGE", "Sketch_2/Edge-SketchCircle_1_2"))
 265 SketchConstraintCoincidence_53 = Sketch_4.setCoincident(SketchLine_22.startPoint(), SketchCircle_3.results()[1])
 266 SketchConstraintCoincidence_53.setName("SketchConstraintCoincidence_59")
 267 SketchConstraintCoincidence_54 = Sketch_4.setCoincident(SketchArc_4.endPoint(), SketchCircle_3.results()[1])
 268 SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_60")
 269 SketchConstraintRadius_5 = Sketch_4.setRadius(SketchArc_7.results()[1], 6)
 270 SketchConstraintRadius_6 = Sketch_4.setRadius(SketchArc_8.results()[1], 6)
 271 SketchConstraintDistance_11 = Sketch_4.setDistance(SketchLine_25.endPoint(), SketchLine_36.result(), 4.5)
 272 SketchConstraintDistance_12 = Sketch_4.setDistance(SketchArc_8.startPoint(), SketchLine_33.result(), 4)
 273 SketchConstraintDistance_13 = Sketch_4.setDistance(SketchArc_7.endPoint(), SketchLine_33.result(), 4)
 274 SketchConstraintDistance_13.setName("SketchConstraintDistance_14")
 275 SketchArc_9 = Sketch_4.addArc(-10, 38.00000000000001, -4, 38.00000000000001, -9.999999999999854, 44.00000000000001, False)
 276 SketchArc_9.setName("SketchArc_10")
 277 SketchArc_9.result().setName("SketchArc_10")
 278 SketchArc_9.results()[1].setName("SketchArc_10_2")
 279 SketchConstraintCoincidence_55 = Sketch_4.setCoincident(SketchArc_9.startPoint(), SketchLine_20.startPoint())
 280 SketchConstraintCoincidence_55.setName("SketchConstraintCoincidence_61")
 281 SketchConstraintCoincidence_56 = Sketch_4.setCoincident(SketchArc_9.endPoint(), SketchLine_23.endPoint())
 282 SketchConstraintCoincidence_56.setName("SketchConstraintCoincidence_62")
 283 SketchConstraintTangent_11 = Sketch_4.setTangent(SketchArc_9.results()[1], SketchLine_20.result())
 284 SketchConstraintTangent_12 = Sketch_4.setTangent(SketchArc_9.results()[1], SketchLine_23.result())
 285 SketchConstraintCoincidence_57 = Sketch_4.setCoincident(SketchLine_35.endPoint(), SketchLine_20.endPoint())
 286 SketchConstraintCoincidence_57.setName("SketchConstraintCoincidence_63")
 287 SketchConstraintCoincidence_58 = Sketch_4.setCoincident(SketchLine_31.startPoint(), SketchLine_23.startPoint())
 288 SketchConstraintCoincidence_58.setName("SketchConstraintCoincidence_64")
 289 SketchConstraintCoincidence_59 = Sketch_4.setCoincident(SketchLine_20.startPoint(), SketchLine_35.result())
 290 SketchConstraintCoincidence_59.setName("SketchConstraintCoincidence_65")
 291 SketchConstraintCoincidence_60 = Sketch_4.setCoincident(SketchLine_23.endPoint(), SketchLine_31.result())
 292 SketchConstraintCoincidence_60.setName("SketchConstraintCoincidence_66")
 293 SketchArc_10 = Sketch_4.addArc(10, 37.99999999999996, 9.99999999990029, 43.99999998819102, 4, 37.99999998819019, False)
 294 SketchArc_10.setName("SketchArc_11")
 295 SketchArc_10.result().setName("SketchArc_11")
 296 SketchArc_10.results()[1].setName("SketchArc_11_2")
 297 SketchConstraintCoincidence_61 = Sketch_4.setCoincident(SketchArc_10.startPoint(), SketchLine_24.startPoint())
 298 SketchConstraintCoincidence_61.setName("SketchConstraintCoincidence_67")
 299 SketchConstraintCoincidence_62 = Sketch_4.setCoincident(SketchArc_10.endPoint(), SketchLine_21.endPoint())
 300 SketchConstraintCoincidence_62.setName("SketchConstraintCoincidence_68")
 301 SketchConstraintTangent_13 = Sketch_4.setTangent(SketchArc_10.results()[1], SketchLine_21.result())
 302 SketchConstraintTangent_14 = Sketch_4.setTangent(SketchArc_10.results()[1], SketchLine_24.result())
 303 SketchConstraintCoincidence_63 = Sketch_4.setCoincident(SketchLine_36.startPoint(), SketchLine_21.startPoint())
 304 SketchConstraintCoincidence_63.setName("SketchConstraintCoincidence_69")
 305 SketchConstraintCoincidence_64 = Sketch_4.setCoincident(SketchLine_26.endPoint(), SketchLine_24.endPoint())
 306 SketchConstraintCoincidence_64.setName("SketchConstraintCoincidence_70")
 307 SketchConstraintCoincidence_65 = Sketch_4.setCoincident(SketchLine_21.endPoint(), SketchLine_36.result())
 308 SketchConstraintCoincidence_65.setName("SketchConstraintCoincidence_71")
 309 SketchConstraintCoincidence_66 = Sketch_4.setCoincident(SketchLine_24.startPoint(), SketchLine_26.result())
 310 SketchConstraintCoincidence_66.setName("SketchConstraintCoincidence_72")
 311 SketchConstraintRadius_7 = Sketch_4.setRadius(SketchArc_9.results()[1], 6)
 312 SketchConstraintRadius_8 = Sketch_4.setRadius(SketchArc_10.results()[1], 6)
 313 SketchConstraintDistance_14 = Sketch_4.setDistance(SketchLine_23.startPoint(), SketchLine_29.result(), 1)
 314 SketchConstraintDistance_14.setName("SketchConstraintDistance_15")
 315 SketchConstraintDistance_15 = Sketch_4.setDistance(SketchLine_24.endPoint(), SketchLine_29.result(), 1)
 316 SketchConstraintDistance_15.setName("SketchConstraintDistance_16")
 317 SketchLine_37 = Sketch_4.addLine(model.selection("EDGE", "PartSet/OX"))
 318 SketchLine_37.setName("SketchLine_40")
 319 SketchLine_37.result().setName("SketchLine_40")
 320 SketchConstraintDistance_16 = Sketch_4.setDistance(SketchArc_10.startPoint(), SketchLine_37.result(), 44)
 321 SketchConstraintDistance_16.setName("SketchConstraintDistance_17")
 322 SketchConstraintDistance_17 = Sketch_4.setDistance(SketchLine_21.result(), SketchLine_24.endPoint(), 6.1)
 323 SketchConstraintDistance_17.setName("SketchConstraintDistance_18")
 324 SketchConstraintDistance_18 = Sketch_4.setDistance(SketchLine_30.endPoint(), SketchLine_20.result(), 6.1)
 325 SketchConstraintDistance_18.setName("SketchConstraintDistance_19")
 326 SketchConstraintCoincidence_67 = Sketch_4.setCoincident(SketchArc_3.center(), SketchCircle_3.center())
 327 SketchConstraintCoincidence_67.setName("SketchConstraintCoincidence_149")
 328 SketchConstraintCoincidence_68 = Sketch_4.setCoincident(SketchArc_4.center(), SketchArc_3.center())
 329 SketchConstraintCoincidence_68.setName("SketchConstraintCoincidence_150")
 330 SketchConstraintDistance_19 = Sketch_4.setDistance(SketchArc_4.center(), SketchLine_34.result(), 12)
 331 SketchConstraintDistance_19.setName("SketchConstraintDistance_43")
 332 model.do()
 333 Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), 50, 30)
 334 Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 22, 22)
 335 Boolean_2 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1")], [model.selection("SOLID", "Extrusion_4_1")])
 336 Extrusion_5 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 22, 22)
 337 Extrusion_6 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_2_2f")], model.selection(), 75, 40)
 338 Boolean_3 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_6_1")], [model.selection("SOLID", "Extrusion_5_1")])
 339 Sketch_5 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
 340 SketchLine_38 = Sketch_5.addLine(44, 3.464101615137769, 17.52573586555855, 49.31887218898888)
 341 SketchLine_38.setName("SketchLine_41")
 342 SketchLine_38.result().setName("SketchLine_41")
 343 SketchPoint_5 = Sketch_5.addPoint(model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_5s-SketchLine_4e"))
 344 SketchConstraintCoincidence_69 = Sketch_5.setCoincident(SketchLine_38.startPoint(), SketchPoint_5.result())
 345 SketchConstraintCoincidence_69.setName("SketchConstraintCoincidence_73")
 346 SketchLine_39 = Sketch_5.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"))
 347 SketchLine_39.setName("SketchLine_42")
 348 SketchLine_39.result().setName("SketchLine_42")
 349 SketchConstraintPerpendicular_2 = Sketch_5.setPerpendicular(SketchLine_38.result(), SketchLine_39.result())
 350 model.do()
 351 Axis_4 = model.addAxis(Part_1_doc, model.selection("FACE", "Sketch_1/Face-SketchLine_10r-SketchLine_11r-SketchLine_8r-SketchLine_3r-SketchLine_9r-SketchLine_6r-SketchArc_1_2r-SketchArc_2_2f"), model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_5s-SketchLine_4e"))
 352 Plane_4 = model.addPlane(Part_1_doc, model.selection("EDGE", "Axis_1"), model.selection("VERTEX", "Sketch_5/Vertex-SketchLine_41e"), False)
 353 Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
 354 SketchLine_40 = Sketch_6.addLine(3.999999999999999, 13.00000000002605, 4, 12.89999999999998)
 355 SketchLine_40.setName("SketchLine_55")
 356 SketchLine_40.result().setName("SketchLine_55")
 357 SketchLine_41 = Sketch_6.addLine(4, 12.89999999999998, -4, 12.89999999999998)
 358 SketchLine_41.setName("SketchLine_44")
 359 SketchLine_41.result().setName("SketchLine_44")
 360 SketchLine_42 = Sketch_6.addLine(4, 19.00000000002614, 4, 12.89999999999998)
 361 SketchLine_42.setName("SketchLine_43")
 362 SketchLine_42.result().setName("SketchLine_43")
 363 SketchLine_42.setAuxiliary(True)
 364 SketchConstraintCoincidence_70 = Sketch_6.setCoincident(SketchLine_42.endPoint(), SketchLine_41.startPoint())
 365 SketchConstraintCoincidence_70.setName("SketchConstraintCoincidence_74")
 366 SketchLine_43 = Sketch_6.addLine(-4, 12.89999999999998, -4.000000000000001, 13.00000000002612)
 367 SketchLine_43.setName("SketchLine_52")
 368 SketchLine_43.result().setName("SketchLine_52")
 369 SketchLine_44 = Sketch_6.addLine(-9.999999999999867, 19.00000000002614, -10.09999999999998, 19.00000000002614)
 370 SketchLine_44.setName("SketchLine_53")
 371 SketchLine_44.result().setName("SketchLine_53")
 372 SketchLine_45 = Sketch_6.addLine(-4, 12.89999999999998, -4, 19.00000000002614)
 373 SketchLine_45.setAuxiliary(True)
 374 SketchConstraintCoincidence_71 = Sketch_6.setCoincident(SketchLine_41.endPoint(), SketchLine_45.startPoint())
 375 SketchConstraintCoincidence_71.setName("SketchConstraintCoincidence_75")
 376 SketchLine_46 = Sketch_6.addLine(10.09999999999999, 19.00000000002614, 9.999999999999858, 19.00000000002614)
 377 SketchLine_46.setName("SketchLine_54")
 378 SketchLine_46.result().setName("SketchLine_54")
 379 SketchLine_47 = Sketch_6.addLine(-4, 19.00000000002614, -10.09999999999998, 19.00000000002614)
 380 SketchLine_47.setName("SketchLine_46")
 381 SketchLine_47.result().setName("SketchLine_46")
 382 SketchLine_47.setAuxiliary(True)
 383 SketchConstraintCoincidence_72 = Sketch_6.setCoincident(SketchLine_45.endPoint(), SketchLine_47.startPoint())
 384 SketchConstraintCoincidence_72.setName("SketchConstraintCoincidence_76")
 385 SketchLine_48 = Sketch_6.addLine(-10.09999999999998, 19.00000000002614, -10.09999999999998, 19.80000000002615)
 386 SketchLine_48.setName("SketchLine_47")
 387 SketchLine_48.result().setName("SketchLine_47")
 388 SketchConstraintCoincidence_73 = Sketch_6.setCoincident(SketchLine_47.endPoint(), SketchLine_48.startPoint())
 389 SketchConstraintCoincidence_73.setName("SketchConstraintCoincidence_77")
 390 SketchLine_49 = Sketch_6.addLine(-10.09999999999998, 19.80000000002615, 10.09999999999999, 19.80000000002615)
 391 SketchLine_49.setName("SketchLine_48")
 392 SketchLine_49.result().setName("SketchLine_48")
 393 SketchConstraintCoincidence_74 = Sketch_6.setCoincident(SketchLine_48.endPoint(), SketchLine_49.startPoint())
 394 SketchConstraintCoincidence_74.setName("SketchConstraintCoincidence_78")
 395 SketchLine_50 = Sketch_6.addLine(10.09999999999999, 19.80000000002615, 10.09999999999999, 19.00000000002614)
 396 SketchLine_50.setName("SketchLine_49")
 397 SketchLine_50.result().setName("SketchLine_49")
 398 SketchConstraintCoincidence_75 = Sketch_6.setCoincident(SketchLine_49.endPoint(), SketchLine_50.startPoint())
 399 SketchConstraintCoincidence_75.setName("SketchConstraintCoincidence_79")
 400 SketchLine_51 = Sketch_6.addLine(10.09999999999999, 19.00000000002614, 4, 19.00000000002614)
 401 SketchLine_51.setName("SketchLine_50")
 402 SketchLine_51.result().setName("SketchLine_50")
 403 SketchLine_51.setAuxiliary(True)
 404 SketchConstraintCoincidence_76 = Sketch_6.setCoincident(SketchLine_50.endPoint(), SketchLine_51.startPoint())
 405 SketchConstraintCoincidence_76.setName("SketchConstraintCoincidence_80")
 406 SketchConstraintCoincidence_77 = Sketch_6.setCoincident(SketchLine_42.startPoint(), SketchLine_51.endPoint())
 407 SketchConstraintCoincidence_77.setName("SketchConstraintCoincidence_81")
 408 SketchConstraintVertical_11 = Sketch_6.setVertical(SketchLine_45.result())
 409 SketchConstraintVertical_12 = Sketch_6.setVertical(SketchLine_42.result())
 410 SketchConstraintHorizontal_7 = Sketch_6.setHorizontal(SketchLine_41.result())
 411 SketchConstraintHorizontal_8 = Sketch_6.setHorizontal(SketchLine_47.result())
 412 SketchConstraintHorizontal_9 = Sketch_6.setHorizontal(SketchLine_51.result())
 413 SketchConstraintHorizontal_10 = Sketch_6.setHorizontal(SketchLine_49.result())
 414 SketchConstraintVertical_13 = Sketch_6.setVertical(SketchLine_50.result())
 415 SketchConstraintDistance_20 = Sketch_6.setDistance(SketchLine_48.startPoint(), SketchLine_49.result(), 0.8)
 416 SketchConstraintDistance_21 = Sketch_6.setDistance(SketchLine_51.startPoint(), SketchLine_49.result(), 0.8)
 417 SketchLine_52 = Sketch_6.addLine(model.selection("EDGE", "Sketch_5/Edge-SketchLine_41"))
 418 SketchLine_52.setName("SketchLine_51")
 419 SketchLine_52.result().setName("SketchLine_51")
 420 SketchConstraintDistance_22 = Sketch_6.setDistance(SketchLine_45.startPoint(), SketchLine_52.result(), 4)
 421 SketchConstraintDistance_23 = Sketch_6.setDistance(SketchLine_42.endPoint(), SketchLine_52.result(), 4)
 422 SketchArc_11 = Sketch_6.addArc(-10, 13.00000000002614, -4.000000000000001, 13.00000000002612, -9.999999999999867, 19.00000000002614, False)
 423 SketchArc_11.setName("SketchArc_12")
 424 SketchArc_11.result().setName("SketchArc_12")
 425 SketchArc_11.results()[1].setName("SketchArc_12_2")
 426 SketchConstraintCoincidence_78 = Sketch_6.setCoincident(SketchArc_11.startPoint(), SketchLine_43.endPoint())
 427 SketchConstraintCoincidence_78.setName("SketchConstraintCoincidence_82")
 428 SketchConstraintCoincidence_79 = Sketch_6.setCoincident(SketchArc_11.endPoint(), SketchLine_44.startPoint())
 429 SketchConstraintCoincidence_79.setName("SketchConstraintCoincidence_83")
 430 SketchConstraintTangent_15 = Sketch_6.setTangent(SketchArc_11.results()[1], SketchLine_43.result())
 431 SketchConstraintTangent_16 = Sketch_6.setTangent(SketchArc_11.results()[1], SketchLine_44.result())
 432 SketchConstraintCoincidence_80 = Sketch_6.setCoincident(SketchLine_45.startPoint(), SketchLine_43.startPoint())
 433 SketchConstraintCoincidence_80.setName("SketchConstraintCoincidence_84")
 434 SketchConstraintCoincidence_81 = Sketch_6.setCoincident(SketchLine_47.endPoint(), SketchLine_44.endPoint())
 435 SketchConstraintCoincidence_81.setName("SketchConstraintCoincidence_85")
 436 SketchConstraintCoincidence_82 = Sketch_6.setCoincident(SketchLine_43.endPoint(), SketchLine_45.result())
 437 SketchConstraintCoincidence_82.setName("SketchConstraintCoincidence_86")
 438 SketchConstraintCoincidence_83 = Sketch_6.setCoincident(SketchLine_44.startPoint(), SketchLine_47.result())
 439 SketchConstraintCoincidence_83.setName("SketchConstraintCoincidence_87")
 440 SketchArc_12 = Sketch_6.addArc(9.999999999999998, 13.00000000002614, 9.999999999999858, 19.00000000002614, 3.999999999999999, 13.00000000002605, False)
 441 SketchArc_12.setName("SketchArc_13")
 442 SketchArc_12.result().setName("SketchArc_13")
 443 SketchArc_12.results()[1].setName("SketchArc_13_2")
 444 SketchConstraintCoincidence_84 = Sketch_6.setCoincident(SketchArc_12.startPoint(), SketchLine_46.endPoint())
 445 SketchConstraintCoincidence_84.setName("SketchConstraintCoincidence_88")
 446 SketchConstraintCoincidence_85 = Sketch_6.setCoincident(SketchArc_12.endPoint(), SketchLine_40.startPoint())
 447 SketchConstraintCoincidence_85.setName("SketchConstraintCoincidence_89")
 448 SketchConstraintTangent_17 = Sketch_6.setTangent(SketchArc_12.results()[1], SketchLine_46.result())
 449 SketchConstraintTangent_18 = Sketch_6.setTangent(SketchArc_12.results()[1], SketchLine_40.result())
 450 SketchConstraintCoincidence_86 = Sketch_6.setCoincident(SketchLine_51.startPoint(), SketchLine_46.startPoint())
 451 SketchConstraintCoincidence_86.setName("SketchConstraintCoincidence_90")
 452 SketchConstraintCoincidence_87 = Sketch_6.setCoincident(SketchLine_42.endPoint(), SketchLine_40.endPoint())
 453 SketchConstraintCoincidence_87.setName("SketchConstraintCoincidence_91")
 454 SketchConstraintCoincidence_88 = Sketch_6.setCoincident(SketchLine_46.endPoint(), SketchLine_51.result())
 455 SketchConstraintCoincidence_88.setName("SketchConstraintCoincidence_92")
 456 SketchConstraintCoincidence_89 = Sketch_6.setCoincident(SketchLine_40.startPoint(), SketchLine_42.result())
 457 SketchConstraintCoincidence_89.setName("SketchConstraintCoincidence_93")
 458 SketchConstraintRadius_9 = Sketch_6.setRadius(SketchArc_11.results()[1], 6)
 459 SketchConstraintRadius_10 = Sketch_6.setRadius(SketchArc_12.results()[1], 6)
 460 SketchConstraintDistance_24 = Sketch_6.setDistance(SketchLine_40.result(), SketchLine_46.startPoint(), 6.1)
 461 SketchConstraintDistance_25 = Sketch_6.setDistance(SketchLine_48.startPoint(), SketchLine_43.result(), 6.1)
 462 SketchConstraintVertical_14 = Sketch_6.setVertical(SketchLine_48.result())
 463 SketchConstraintDistance_26 = Sketch_6.setDistance(SketchLine_41.result(), SketchArc_12.startPoint(), 6.1)
 464 SketchLine_53 = Sketch_6.addLine(model.selection("EDGE", "Axis_1"))
 465 SketchLine_53.setName("SketchLine_56")
 466 SketchLine_53.result().setName("SketchLine_56")
 467 SketchConstraintCoincidence_90 = Sketch_6.setCoincident(SketchArc_12.startPoint(), SketchLine_53.result())
 468 SketchConstraintCoincidence_90.setName("SketchConstraintCoincidence_94")
 469 model.do()
 470 Extrusion_7 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchLine_55r-SketchLine_44r-SketchLine_52r-SketchLine_53r-SketchLine_54r-SketchLine_47r-SketchLine_48r-SketchLine_49r-SketchArc_12_2r-SketchArc_13_2r")], model.selection(), 0, 40)
 471 Boolean_4 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Boolean_1_1")], [model.selection("SOLID", "Boolean_2_1")])
 472 Boolean_5 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Boolean_4_1")], [model.selection("SOLID", "Extrusion_7_1")])
 473 Boolean_6 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_5_1")], [model.selection("SOLID", "Boolean_3_1")])
 474 Extrusion_8 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_10r-SketchLine_11r-SketchLine_8r-SketchLine_3r-SketchLine_9r-SketchLine_6r-SketchArc_1_2r-SketchArc_2_2f")], model.selection(), 55, 55)
 475 Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face_7"))
 476 SketchLine_54 = Sketch_7.addLine(55, -9.237604307034024, 55, -60)
 477 SketchLine_54.setName("SketchLine_66")
 478 SketchLine_54.result().setName("SketchLine_66")
 479 SketchPoint_6 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_7&Extrusion_8_1/Generated_Face_6&Extrusion_8_1/To_Face_1"))
 480 SketchLine_55 = Sketch_7.addLine(55, -9.237604307034024, 55, -70)
 481 SketchLine_55.setName("SketchLine_57")
 482 SketchLine_55.result().setName("SketchLine_57")
 483 SketchLine_55.setAuxiliary(True)
 484 SketchConstraintCoincidence_91 = Sketch_7.setCoincident(SketchLine_55.startPoint(), SketchPoint_6.result())
 485 SketchConstraintCoincidence_91.setName("SketchConstraintCoincidence_95")
 486 SketchPoint_7 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_8&Extrusion_8_1/Generated_Face_7&Extrusion_8_1/To_Face_1"))
 487 SketchConstraintCoincidence_92 = Sketch_7.setCoincident(SketchLine_55.endPoint(), SketchPoint_7.result())
 488 SketchConstraintCoincidence_92.setName("SketchConstraintCoincidence_96")
 489 SketchLine_56 = Sketch_7.addLine(45.00000000000001, -70, -45.00000000000001, -70)
 490 SketchLine_56.setName("SketchLine_67")
 491 SketchLine_56.result().setName("SketchLine_67")
 492 SketchLine_57 = Sketch_7.addLine(55, -70, -55, -70)
 493 SketchLine_57.setName("SketchLine_58")
 494 SketchLine_57.result().setName("SketchLine_58")
 495 SketchLine_57.setAuxiliary(True)
 496 SketchConstraintCoincidence_93 = Sketch_7.setCoincident(SketchLine_55.endPoint(), SketchLine_57.startPoint())
 497 SketchConstraintCoincidence_93.setName("SketchConstraintCoincidence_97")
 498 SketchPoint_8 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_8&Extrusion_8_1/Generated_Face_7&Extrusion_8_1/From_Face_1"))
 499 SketchConstraintCoincidence_94 = Sketch_7.setCoincident(SketchLine_57.endPoint(), SketchPoint_8.result())
 500 SketchConstraintCoincidence_94.setName("SketchConstraintCoincidence_98")
 501 SketchLine_58 = Sketch_7.addLine(-55.00000000000001, -59.99999999999999, -55, -9.237604307034024)
 502 SketchLine_58.setName("SketchLine_68")
 503 SketchLine_58.result().setName("SketchLine_68")
 504 SketchLine_59 = Sketch_7.addLine(-55, -70, -55, -9.237604307034024)
 505 SketchLine_59.setAuxiliary(True)
 506 SketchConstraintCoincidence_95 = Sketch_7.setCoincident(SketchLine_57.endPoint(), SketchLine_59.startPoint())
 507 SketchConstraintCoincidence_95.setName("SketchConstraintCoincidence_99")
 508 SketchPoint_9 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_7&Extrusion_8_1/Generated_Face_6&Extrusion_8_1/From_Face_1"))
 509 SketchConstraintCoincidence_96 = Sketch_7.setCoincident(SketchLine_59.endPoint(), SketchPoint_9.result())
 510 SketchConstraintCoincidence_96.setName("SketchConstraintCoincidence_100")
 511 SketchLine_60 = Sketch_7.addLine(-55, -9.237604307034024, -61.32702426187202, -9.237604307034024)
 512 SketchConstraintCoincidence_97 = Sketch_7.setCoincident(SketchLine_59.endPoint(), SketchLine_60.startPoint())
 513 SketchConstraintCoincidence_97.setName("SketchConstraintCoincidence_101")
 514 SketchLine_61 = Sketch_7.addLine(-61.32702426187202, -9.237604307034024, -61.32702426187202, -75.68652656141983)
 515 SketchConstraintCoincidence_98 = Sketch_7.setCoincident(SketchLine_60.endPoint(), SketchLine_61.startPoint())
 516 SketchConstraintCoincidence_98.setName("SketchConstraintCoincidence_102")
 517 SketchLine_62 = Sketch_7.addLine(-61.32702426187202, -75.68652656141983, 60.38641987912783, -75.68652656141983)
 518 SketchConstraintCoincidence_99 = Sketch_7.setCoincident(SketchLine_61.endPoint(), SketchLine_62.startPoint())
 519 SketchConstraintCoincidence_99.setName("SketchConstraintCoincidence_103")
 520 SketchLine_63 = Sketch_7.addLine(60.38641987912783, -75.68652656141983, 60.38641987912783, -9.237604307034024)
 521 SketchConstraintCoincidence_100 = Sketch_7.setCoincident(SketchLine_62.endPoint(), SketchLine_63.startPoint())
 522 SketchConstraintCoincidence_100.setName("SketchConstraintCoincidence_104")
 523 SketchLine_64 = Sketch_7.addLine(60.38641987912783, -9.237604307034024, 55, -9.237604307034024)
 524 SketchConstraintCoincidence_101 = Sketch_7.setCoincident(SketchLine_63.endPoint(), SketchLine_64.startPoint())
 525 SketchConstraintCoincidence_101.setName("SketchConstraintCoincidence_105")
 526 SketchConstraintCoincidence_102 = Sketch_7.setCoincident(SketchLine_55.startPoint(), SketchLine_64.endPoint())
 527 SketchConstraintCoincidence_102.setName("SketchConstraintCoincidence_106")
 528 SketchConstraintCoincidence_103 = Sketch_7.setCoincident(SketchPoint_6.coordinates(), SketchLine_64.endPoint())
 529 SketchConstraintCoincidence_103.setName("SketchConstraintCoincidence_107")
 530 SketchConstraintHorizontal_11 = Sketch_7.setHorizontal(SketchLine_64.result())
 531 SketchConstraintHorizontal_12 = Sketch_7.setHorizontal(SketchLine_60.result())
 532 SketchConstraintHorizontal_13 = Sketch_7.setHorizontal(SketchLine_62.result())
 533 SketchConstraintVertical_15 = Sketch_7.setVertical(SketchLine_61.result())
 534 SketchConstraintVertical_16 = Sketch_7.setVertical(SketchLine_63.result())
 535 SketchArc_13 = Sketch_7.addArc(45, -60, 45.00000000000001, -70, 55, -60, False)
 536 SketchArc_13.setName("SketchArc_14")
 537 SketchArc_13.result().setName("SketchArc_14")
 538 SketchArc_13.results()[1].setName("SketchArc_14_2")
 539 SketchLine_65 = Sketch_7.addLine(45.00000000000001, -70, -55, -70)
 540 SketchLine_65.setAuxiliary(True)
 541 SketchConstraintCoincidence_104 = Sketch_7.setCoincident(SketchArc_13.startPoint(), SketchLine_65.startPoint())
 542 SketchConstraintCoincidence_104.setName("SketchConstraintCoincidence_108")
 543 SketchConstraintCoincidence_105 = Sketch_7.setCoincident(SketchArc_13.endPoint(), SketchLine_54.endPoint())
 544 SketchConstraintCoincidence_105.setName("SketchConstraintCoincidence_109")
 545 SketchConstraintTangent_19 = Sketch_7.setTangent(SketchArc_13.results()[1], SketchLine_65.result())
 546 SketchConstraintTangent_20 = Sketch_7.setTangent(SketchArc_13.results()[1], SketchLine_54.result())
 547 SketchConstraintCoincidence_106 = Sketch_7.setCoincident(SketchLine_57.endPoint(), SketchLine_65.endPoint())
 548 SketchConstraintCoincidence_106.setName("SketchConstraintCoincidence_110")
 549 SketchConstraintCoincidence_107 = Sketch_7.setCoincident(SketchLine_55.startPoint(), SketchLine_54.startPoint())
 550 SketchConstraintCoincidence_107.setName("SketchConstraintCoincidence_111")
 551 SketchConstraintCoincidence_108 = Sketch_7.setCoincident(SketchLine_65.startPoint(), SketchLine_57.result())
 552 SketchConstraintCoincidence_108.setName("SketchConstraintCoincidence_112")
 553 SketchConstraintCoincidence_109 = Sketch_7.setCoincident(SketchLine_54.endPoint(), SketchLine_55.result())
 554 SketchConstraintCoincidence_109.setName("SketchConstraintCoincidence_113")
 555 SketchArc_14 = Sketch_7.addArc(-45.00000000000001, -60.00000000000004, -55.00000000000001, -59.99999999999999, -45.00000000000001, -70, False)
 556 SketchArc_14.setName("SketchArc_15")
 557 SketchArc_14.result().setName("SketchArc_15")
 558 SketchArc_14.results()[1].setName("SketchArc_15_2")
 559 SketchConstraintCoincidence_110 = Sketch_7.setCoincident(SketchArc_14.startPoint(), SketchLine_58.startPoint())
 560 SketchConstraintCoincidence_110.setName("SketchConstraintCoincidence_114")
 561 SketchConstraintCoincidence_111 = Sketch_7.setCoincident(SketchArc_14.endPoint(), SketchLine_56.endPoint())
 562 SketchConstraintCoincidence_111.setName("SketchConstraintCoincidence_115")
 563 SketchConstraintTangent_21 = Sketch_7.setTangent(SketchArc_14.results()[1], SketchLine_56.result())
 564 SketchConstraintTangent_22 = Sketch_7.setTangent(SketchArc_14.results()[1], SketchLine_58.result())
 565 SketchConstraintCoincidence_112 = Sketch_7.setCoincident(SketchLine_65.startPoint(), SketchLine_56.startPoint())
 566 SketchConstraintCoincidence_112.setName("SketchConstraintCoincidence_116")
 567 SketchConstraintCoincidence_113 = Sketch_7.setCoincident(SketchLine_59.endPoint(), SketchLine_58.endPoint())
 568 SketchConstraintCoincidence_113.setName("SketchConstraintCoincidence_117")
 569 SketchConstraintCoincidence_114 = Sketch_7.setCoincident(SketchLine_56.endPoint(), SketchLine_65.result())
 570 SketchConstraintCoincidence_114.setName("SketchConstraintCoincidence_118")
 571 SketchConstraintCoincidence_115 = Sketch_7.setCoincident(SketchLine_58.startPoint(), SketchLine_59.result())
 572 SketchConstraintCoincidence_115.setName("SketchConstraintCoincidence_119")
 573 SketchConstraintRadius_11 = Sketch_7.setRadius(SketchArc_13.results()[1], 10)
 574 SketchConstraintRadius_12 = Sketch_7.setRadius(SketchArc_14.results()[1], 10)
 575 SketchCircle_4 = Sketch_7.addCircle(44, -59, 5)
 576 SketchCircle_5 = Sketch_7.addCircle(-43.99999999999999, -58.99999999999999, 5)
 577 SketchConstraintRadius_13 = Sketch_7.setRadius(SketchCircle_4.results()[1], 5)
 578 SketchConstraintRadius_14 = Sketch_7.setRadius(SketchCircle_5.results()[1], 5)
 579 SketchConstraintDistance_27 = Sketch_7.setDistance(SketchCircle_4.center(), SketchLine_56.result(), 11)
 580 SketchConstraintDistance_28 = Sketch_7.setDistance(SketchCircle_4.center(), SketchLine_54.result(), 11)
 581 SketchConstraintDistance_29 = Sketch_7.setDistance(SketchCircle_5.center(), SketchLine_56.result(), 11)
 582 SketchConstraintDistance_30 = Sketch_7.setDistance(SketchCircle_5.center(), SketchLine_58.result(), 11)
 583 SketchCircle_6 = Sketch_7.addCircle(44, -20.23760430703402, 5)
 584 SketchConstraintRadius_15 = Sketch_7.setRadius(SketchCircle_6.results()[1], 5)
 585 SketchCircle_7 = Sketch_7.addCircle(-44, -20.23760430703402, 5)
 586 SketchConstraintRadius_16 = Sketch_7.setRadius(SketchCircle_7.results()[1], 5)
 587 SketchConstraintDistance_31 = Sketch_7.setDistance(SketchCircle_6.center(), SketchLine_54.result(), 11)
 588 SketchLine_66 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_8_1/Generated_Face_7&Extrusion_8_1/Generated_Face_6"))
 589 SketchLine_66.setName("SketchLine_69")
 590 SketchLine_66.result().setName("SketchLine_69")
 591 SketchConstraintDistance_32 = Sketch_7.setDistance(SketchCircle_6.center(), SketchLine_66.result(), 11)
 592 SketchConstraintDistance_33 = Sketch_7.setDistance(SketchCircle_7.center(), SketchLine_58.result(), 11)
 593 SketchConstraintDistance_34 = Sketch_7.setDistance(SketchCircle_7.center(), SketchLine_66.result(), 11)
 594 model.do()
 595 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchLine_66f-SketchLine_67f-SketchLine_68f-SketchLine_60f-SketchLine_61f-SketchLine_62f-SketchLine_63f-SketchLine_64f-SketchArc_14_2r-SketchArc_15_2r"), model.selection("FACE", "Sketch_7/Face-SketchCircle_4_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_5_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_7_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_6_2f")], model.selection(), 0, 10, [model.selection("SOLID", "Extrusion_8_1")])
 596 Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face_5"))
 597 SketchLine_67 = Sketch_8.addLine(55, -34.06366588218793, 55, 66.69872981077805)
 598 SketchLine_67.setName("SketchLine_79")
 599 SketchLine_67.result().setName("SketchLine_79")
 600 SketchPoint_10 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_6&ExtrusionCut_1_1/Modfied_1&Extrusion_8_1/Generated_Face_5"))
 601 SketchLine_68 = Sketch_8.addLine(55, -34.06366588218793, 55, 76.69872981077803)
 602 SketchLine_68.setName("SketchLine_70")
 603 SketchLine_68.result().setName("SketchLine_70")
 604 SketchLine_68.setAuxiliary(True)
 605 SketchConstraintCoincidence_116 = Sketch_8.setCoincident(SketchLine_68.startPoint(), SketchPoint_10.result())
 606 SketchConstraintCoincidence_116.setName("SketchConstraintCoincidence_120")
 607 SketchPoint_11 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_1&Extrusion_8_1/Generated_Face_5&Extrusion_8_1/Generated_Face_4"))
 608 SketchConstraintCoincidence_117 = Sketch_8.setCoincident(SketchLine_68.endPoint(), SketchPoint_11.result())
 609 SketchConstraintCoincidence_117.setName("SketchConstraintCoincidence_121")
 610 SketchLine_69 = Sketch_8.addLine(45, 76.69872981077805, -44.9999999570576, 76.69872981077805)
 611 SketchLine_69.setName("SketchLine_80")
 612 SketchLine_69.result().setName("SketchLine_80")
 613 SketchLine_70 = Sketch_8.addLine(55, 76.69872981077803, -55, 76.69872981077803)
 614 SketchLine_70.setName("SketchLine_71")
 615 SketchLine_70.result().setName("SketchLine_71")
 616 SketchLine_70.setAuxiliary(True)
 617 SketchConstraintCoincidence_118 = Sketch_8.setCoincident(SketchLine_68.endPoint(), SketchLine_70.startPoint())
 618 SketchConstraintCoincidence_118.setName("SketchConstraintCoincidence_122")
 619 SketchPoint_12 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_3&Extrusion_8_1/Generated_Face_5&Extrusion_8_1/Generated_Face_4"))
 620 SketchConstraintCoincidence_119 = Sketch_8.setCoincident(SketchLine_70.endPoint(), SketchPoint_12.result())
 621 SketchConstraintCoincidence_119.setName("SketchConstraintCoincidence_123")
 622 SketchLine_71 = Sketch_8.addLine(-55, 66.69872976783566, -55, -34.06366588218793)
 623 SketchLine_71.setName("SketchLine_81")
 624 SketchLine_71.result().setName("SketchLine_81")
 625 SketchLine_72 = Sketch_8.addLine(-55, 76.69872981077803, -55, -34.06366588218793)
 626 SketchLine_72.setAuxiliary(True)
 627 SketchConstraintCoincidence_120 = Sketch_8.setCoincident(SketchLine_70.endPoint(), SketchLine_72.startPoint())
 628 SketchConstraintCoincidence_120.setName("SketchConstraintCoincidence_124")
 629 SketchPoint_13 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_6&ExtrusionCut_1_1/Modfied_3&Extrusion_8_1/Generated_Face_5"))
 630 SketchConstraintCoincidence_121 = Sketch_8.setCoincident(SketchLine_72.endPoint(), SketchPoint_13.result())
 631 SketchConstraintCoincidence_121.setName("SketchConstraintCoincidence_125")
 632 SketchLine_73 = Sketch_8.addLine(-55, -34.06366588218793, -83.25521566485324, -34.06366588218793)
 633 SketchConstraintCoincidence_122 = Sketch_8.setCoincident(SketchLine_72.endPoint(), SketchLine_73.startPoint())
 634 SketchConstraintCoincidence_122.setName("SketchConstraintCoincidence_126")
 635 SketchLine_74 = Sketch_8.addLine(-83.25521566485324, -34.06366588218793, -83.25521566485298, 92.00148393088952)
 636 SketchConstraintCoincidence_123 = Sketch_8.setCoincident(SketchLine_73.endPoint(), SketchLine_74.startPoint())
 637 SketchConstraintCoincidence_123.setName("SketchConstraintCoincidence_127")
 638 SketchLine_75 = Sketch_8.addLine(-83.25521566485298, 92.00148393088952, 87.50975635635101, 92.00148393088952)
 639 SketchConstraintCoincidence_124 = Sketch_8.setCoincident(SketchLine_74.endPoint(), SketchLine_75.startPoint())
 640 SketchConstraintCoincidence_124.setName("SketchConstraintCoincidence_128")
 641 SketchLine_76 = Sketch_8.addLine(87.50975635635101, 92.00148393088952, 87.50975635635101, -34.06366588218793)
 642 SketchConstraintCoincidence_125 = Sketch_8.setCoincident(SketchLine_75.endPoint(), SketchLine_76.startPoint())
 643 SketchConstraintCoincidence_125.setName("SketchConstraintCoincidence_129")
 644 SketchLine_77 = Sketch_8.addLine(87.50975635635101, -34.06366588218793, 55, -34.06366588218793)
 645 SketchConstraintCoincidence_126 = Sketch_8.setCoincident(SketchLine_76.endPoint(), SketchLine_77.startPoint())
 646 SketchConstraintCoincidence_126.setName("SketchConstraintCoincidence_130")
 647 SketchConstraintCoincidence_127 = Sketch_8.setCoincident(SketchLine_68.startPoint(), SketchLine_77.endPoint())
 648 SketchConstraintCoincidence_127.setName("SketchConstraintCoincidence_131")
 649 SketchConstraintCoincidence_128 = Sketch_8.setCoincident(SketchPoint_10.coordinates(), SketchLine_77.endPoint())
 650 SketchConstraintCoincidence_128.setName("SketchConstraintCoincidence_132")
 651 SketchConstraintHorizontal_14 = Sketch_8.setHorizontal(SketchLine_77.result())
 652 SketchConstraintHorizontal_15 = Sketch_8.setHorizontal(SketchLine_73.result())
 653 SketchConstraintHorizontal_16 = Sketch_8.setHorizontal(SketchLine_75.result())
 654 SketchConstraintVertical_17 = Sketch_8.setVertical(SketchLine_74.result())
 655 SketchConstraintVertical_18 = Sketch_8.setVertical(SketchLine_76.result())
 656 SketchArc_15 = Sketch_8.addArc(45, 66.69872981077805, 55, 66.69872981077805, 45, 76.69872981077805, False)
 657 SketchArc_15.setName("SketchArc_16")
 658 SketchArc_15.result().setName("SketchArc_16")
 659 SketchArc_15.results()[1].setName("SketchArc_16_2")
 660 SketchConstraintCoincidence_129 = Sketch_8.setCoincident(SketchArc_15.startPoint(), SketchLine_67.endPoint())
 661 SketchConstraintCoincidence_129.setName("SketchConstraintCoincidence_133")
 662 SketchLine_78 = Sketch_8.addLine(45, 76.69872981077805, -55, 76.69872981077803)
 663 SketchLine_78.setAuxiliary(True)
 664 SketchConstraintCoincidence_130 = Sketch_8.setCoincident(SketchArc_15.endPoint(), SketchLine_78.startPoint())
 665 SketchConstraintCoincidence_130.setName("SketchConstraintCoincidence_134")
 666 SketchConstraintTangent_23 = Sketch_8.setTangent(SketchArc_15.results()[1], SketchLine_78.result())
 667 SketchConstraintTangent_24 = Sketch_8.setTangent(SketchArc_15.results()[1], SketchLine_67.result())
 668 SketchConstraintCoincidence_131 = Sketch_8.setCoincident(SketchLine_70.endPoint(), SketchLine_78.endPoint())
 669 SketchConstraintCoincidence_131.setName("SketchConstraintCoincidence_135")
 670 SketchConstraintCoincidence_132 = Sketch_8.setCoincident(SketchLine_68.startPoint(), SketchLine_67.startPoint())
 671 SketchConstraintCoincidence_132.setName("SketchConstraintCoincidence_136")
 672 SketchConstraintCoincidence_133 = Sketch_8.setCoincident(SketchLine_78.startPoint(), SketchLine_70.result())
 673 SketchConstraintCoincidence_133.setName("SketchConstraintCoincidence_137")
 674 SketchConstraintCoincidence_134 = Sketch_8.setCoincident(SketchLine_67.endPoint(), SketchLine_68.result())
 675 SketchConstraintCoincidence_134.setName("SketchConstraintCoincidence_138")
 676 SketchArc_16 = Sketch_8.addArc(-44.9999999570576, 66.69872976783566, -44.9999999570576, 76.69872981077805, -55, 66.69872976783566, False)
 677 SketchArc_16.setName("SketchArc_17")
 678 SketchArc_16.result().setName("SketchArc_17")
 679 SketchArc_16.results()[1].setName("SketchArc_17_2")
 680 SketchConstraintCoincidence_135 = Sketch_8.setCoincident(SketchArc_16.startPoint(), SketchLine_69.endPoint())
 681 SketchConstraintCoincidence_135.setName("SketchConstraintCoincidence_139")
 682 SketchConstraintCoincidence_136 = Sketch_8.setCoincident(SketchArc_16.endPoint(), SketchLine_71.startPoint())
 683 SketchConstraintCoincidence_136.setName("SketchConstraintCoincidence_140")
 684 SketchConstraintTangent_25 = Sketch_8.setTangent(SketchArc_16.results()[1], SketchLine_69.result())
 685 SketchConstraintTangent_26 = Sketch_8.setTangent(SketchArc_16.results()[1], SketchLine_71.result())
 686 SketchConstraintCoincidence_137 = Sketch_8.setCoincident(SketchLine_78.startPoint(), SketchLine_69.startPoint())
 687 SketchConstraintCoincidence_137.setName("SketchConstraintCoincidence_141")
 688 SketchConstraintCoincidence_138 = Sketch_8.setCoincident(SketchLine_72.endPoint(), SketchLine_71.endPoint())
 689 SketchConstraintCoincidence_138.setName("SketchConstraintCoincidence_142")
 690 SketchConstraintCoincidence_139 = Sketch_8.setCoincident(SketchLine_69.endPoint(), SketchLine_78.result())
 691 SketchConstraintCoincidence_139.setName("SketchConstraintCoincidence_143")
 692 SketchConstraintCoincidence_140 = Sketch_8.setCoincident(SketchLine_71.startPoint(), SketchLine_72.result())
 693 SketchConstraintCoincidence_140.setName("SketchConstraintCoincidence_144")
 694 SketchConstraintRadius_17 = Sketch_8.setRadius(SketchArc_15.results()[1], 10)
 695 SketchConstraintRadius_18 = Sketch_8.setRadius(SketchArc_16.results()[1], 10)
 696 SketchCircle_8 = Sketch_8.addCircle(-44, 51.69872981077802, 5)
 697 SketchConstraintRadius_19 = Sketch_8.setRadius(SketchCircle_8.results()[1], 5)
 698 SketchConstraintDistance_35 = Sketch_8.setDistance(SketchCircle_8.center(), SketchLine_69.result(), 25)
 699 SketchConstraintDistance_36 = Sketch_8.setDistance(SketchCircle_8.center(), SketchLine_71.result(), 11)
 700 SketchCircle_9 = Sketch_8.addCircle(-44, 16.69872981077805, 5)
 701 SketchConstraintRadius_20 = Sketch_8.setRadius(SketchCircle_9.results()[1], 5)
 702 SketchConstraintDistance_37 = Sketch_8.setDistance(SketchCircle_9.center(), SketchLine_71.result(), 11)
 703 SketchConstraintDistance_38 = Sketch_8.setDistance(SketchCircle_9.center(), SketchLine_69.result(), 60)
 704 SketchArc_17 = Sketch_8.addArc(44, 16.69872981077803, 49, 16.69872981077806, 39, 16.69872981077804, True)
 705 SketchArc_17.setName("SketchArc_19")
 706 SketchArc_17.result().setName("SketchArc_19")
 707 SketchArc_17.results()[1].setName("SketchArc_19_2")
 708 SketchConstraintRadius_21 = Sketch_8.setRadius(SketchArc_17.results()[1], 5)
 709 SketchConstraintRadius_21.setName("SketchConstraintRadius_22")
 710 SketchConstraintDistance_39 = Sketch_8.setDistance(SketchArc_17.center(), SketchLine_69.result(), 60)
 711 SketchConstraintDistance_39.setName("SketchConstraintDistance_41")
 712 SketchArc_18 = Sketch_8.addArc(44, 51.69872981077805, 49, 51.69872981077805, 39.00000000000002, 51.69873025170988, False)
 713 SketchLine_79 = Sketch_8.addLine(49, 16.69872981077806, 49, 51.69872981077805)
 714 SketchLine_79.setName("SketchLine_82")
 715 SketchLine_79.result().setName("SketchLine_82")
 716 SketchConstraintCoincidence_141 = Sketch_8.setCoincident(SketchArc_18.startPoint(), SketchLine_79.endPoint())
 717 SketchConstraintCoincidence_141.setName("SketchConstraintCoincidence_145")
 718 SketchConstraintCoincidence_142 = Sketch_8.setCoincident(SketchLine_79.startPoint(), SketchArc_17.startPoint())
 719 SketchConstraintCoincidence_142.setName("SketchConstraintCoincidence_146")
 720 SketchLine_80 = Sketch_8.addLine(39, 16.69872981077804, 39.00000000000002, 51.69873025170988)
 721 SketchLine_80.setName("SketchLine_83")
 722 SketchLine_80.result().setName("SketchLine_83")
 723 SketchConstraintCoincidence_143 = Sketch_8.setCoincident(SketchArc_17.endPoint(), SketchLine_80.startPoint())
 724 SketchConstraintCoincidence_143.setName("SketchConstraintCoincidence_147")
 725 SketchConstraintCoincidence_144 = Sketch_8.setCoincident(SketchArc_18.endPoint(), SketchLine_80.endPoint())
 726 SketchConstraintCoincidence_144.setName("SketchConstraintCoincidence_148")
 727 SketchConstraintDistance_40 = Sketch_8.setDistance(SketchArc_17.center(), SketchLine_67.result(), 11)
 728 SketchConstraintDistance_41 = Sketch_8.setDistance(SketchLine_69.result(), SketchArc_18.center(), 25)
 729 SketchConstraintDistance_41.setName("SketchConstraintDistance_42")
 730 SketchConstraintDistance_42 = Sketch_8.setDistance(SketchArc_18.center(), SketchLine_67.result(), 11)
 731 SketchConstraintRadius_22 = Sketch_8.setRadius(SketchArc_18.results()[1], 5)
 732 SketchConstraintRadius_22.setName("SketchConstraintRadius_23")
 733 SketchConstraintLength_1 = Sketch_8.setLength(SketchLine_80.result(), 35.000000440932)
 734 SketchConstraintLength_2 = Sketch_8.setLength(SketchLine_79.result(), 35)
 735 SketchConstraintLength_3 = Sketch_8.setLength(SketchLine_75.result(), 170.764972021204)
 736 SketchConstraintLength_4 = Sketch_8.setLength(SketchLine_77.result(), 32.509756356351)
 737 SketchConstraintLength_5 = Sketch_8.setLength(SketchLine_76.result(), 126.065149813077)
 738 SketchConstraintDistance_43 = Sketch_8.setDistance(SketchArc_18.endPoint(), SketchLine_69.result(), 24.999999559068)
 739 SketchConstraintDistance_43.setName("SketchConstraintDistance_44")
 740 SketchConstraintDistance_44 = Sketch_8.setDistance(SketchArc_18.startPoint(), SketchLine_69.result(), 25)
 741 SketchConstraintDistance_44.setName("SketchConstraintDistance_45")
 742 model.do()
 743 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_79r-SketchLine_80r-SketchLine_81r-SketchLine_73r-SketchLine_74r-SketchLine_75r-SketchLine_76r-SketchLine_77r-SketchArc_16_2r-SketchArc_17_2r"), model.selection("WIRE", "Sketch_8/Wire-SketchCircle_8_2f"), model.selection("WIRE", "Sketch_8/Wire-SketchCircle_9_2f"), model.selection("WIRE", "Sketch_8/Wire-SketchArc_19_2f-SketchArc_18_2f-SketchLine_82f-SketchLine_83r")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_1_1")])
 744 Boolean_7 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Boolean_6_1")], [model.selection("SOLID", "ExtrusionCut_2_1")])
 745 model.do()
 746
 747 # Test reexecution after parameter change
 748 Parameter_H.setValue(8)
 749 model.do()
 750 model.testResultsVolumes(Boolean_7, [169755.330836739361984655261039734])
 751 Parameter_H.setValue(6)
 752 model.end()
 753
 754 from GeomAPI import GeomAPI_Shape
 755
 756 model.testNbResults(Boolean_7, 1)
 757 model.testNbSubResults(Boolean_7, [0])
 758 model.testNbSubShapes(Boolean_7, GeomAPI_Shape.SOLID, [1])
 759 model.testNbSubShapes(Boolean_7, GeomAPI_Shape.FACE, [50])
 760 model.testNbSubShapes(Boolean_7, GeomAPI_Shape.EDGE, [266])
 761 model.testNbSubShapes(Boolean_7, GeomAPI_Shape.VERTEX, [532])
 762 model.testResultsVolumes(Boolean_7, [156999.209584889642428606748580933])
 763
 764 assert(model.checkPythonDump)