test.models/CSWA.py

   1 # Copyright (C) 2014-2022  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from SketchAPI import *
  21
  22 from salome.shaper import model
  23
  24 model.begin()
  25 partSet = model.moduleDocument()
  26 Part_1 = model.addPart(partSet)
  27 Part_1_doc = Part_1.document()
  28 Parameter_A = model.addParameter(Part_1_doc, "a", "63")
  29 model.addParameter(Part_1_doc, "b", "50")
  30 model.addParameter(Part_1_doc, "c", "100")
  31 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
  32 SketchLine_1 = Sketch_1.addLine(-45, 0, 0, 0)
  33 SketchLine_2 = Sketch_1.addLine(0, 0, 23.33965093306752, 8.494938217797719)
  34 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  35 SketchLine_3 = Sketch_1.addLine(33.83092017818969, 6.16907982180411, 40, 0)
  36 SketchLine_4 = Sketch_1.addLine(40, 0, 55, 0)
  37 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  38 SketchConstraintCoincidence_2.setName("SketchConstraintCoincidence_3")
  39 SketchLine_5 = Sketch_1.addLine(55, 0, 55, 48)
  40 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  41 SketchConstraintCoincidence_3.setName("SketchConstraintCoincidence_4")
  42 SketchLine_6 = Sketch_1.addLine(55, 48, 15, 48)
  43 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  44 SketchConstraintCoincidence_4.setName("SketchConstraintCoincidence_5")
  45 SketchLine_7 = Sketch_1.addLine(15, 48, 15, 63)
  46 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  47 SketchConstraintCoincidence_5.setName("SketchConstraintCoincidence_6")
  48 SketchLine_8 = Sketch_1.addLine(15, 63, -15, 63)
  49 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  50 SketchConstraintCoincidence_6.setName("SketchConstraintCoincidence_7")
  51 SketchLine_9 = Sketch_1.addLine(-15, 63, -15, 35.00000000000001)
  52 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  53 SketchConstraintCoincidence_7.setName("SketchConstraintCoincidence_8")
  54 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  55 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_6.result())
  56 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_8.result())
  57 SketchConstraintCollinear_1 = Sketch_1.setCollinear(SketchLine_1.result(), SketchLine_4.result())
  58 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_5.result())
  59 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_9.result())
  60 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_7.result())
  61 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_3.endPoint(), SketchLine_4.endPoint(), 15)
  62 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_3.endPoint(), SketchLine_1.endPoint(), 40)
  63 SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_1.startPoint(), SketchLine_4.endPoint(), "c")
  64 SketchConstraintDistance_4 = Sketch_1.setDistance(SketchLine_8.startPoint(), SketchLine_6.result(), 15)
  65 SketchConstraintDistance_5 = Sketch_1.setDistance(SketchLine_8.startPoint(), SketchLine_5.result(), 40)
  66 SketchLine_10 = Sketch_1.addLine(-45, 4.999999999999999, -45, 0)
  67 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_10.endPoint())
  68 SketchConstraintCoincidence_8.setName("SketchConstraintCoincidence_9")
  69 SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_10.result())
  70 SketchConstraintDistance_6 = Sketch_1.setDistance(SketchLine_9.startPoint(), SketchLine_1.result(), "a")
  71 SketchArc_1 = Sketch_1.addArc(-45, 35, -45, 4.999999999999999, -15, 35.00000000000001, False)
  72 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_10.result())
  73 SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_10")
  74 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_10.startPoint())
  75 SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_11")
  76 SketchConstraintAngle_1 = Sketch_1.setAngle(SketchLine_3.result(), SketchLine_1.result(), 45)
  77 SketchConstraintAngle_2 = Sketch_1.setAngleBackward(SketchLine_2.result(), SketchLine_4.result(), 20)
  78 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_9.endPoint())
  79 SketchConstraintCoincidence_11.setName("SketchConstraintCoincidence_12")
  80 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_9.result())
  81 SketchConstraintDistance_7 = Sketch_1.setDistance(SketchArc_1.center(), SketchLine_1.result(), 35)
  82 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], 30)
  83 SketchArc_2 = Sketch_1.addArc(26.75985236632421, -0.9019879900613652, 33.83092017818969, 6.16907982180411, 23.33965093306752, 8.494938217797719, False)
  84 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_3.startPoint())
  85 SketchConstraintCoincidence_12.setName("SketchConstraintCoincidence_13")
  86 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_2.endPoint())
  87 SketchConstraintCoincidence_13.setName("SketchConstraintCoincidence_14")
  88 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_2.result())
  89 SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_3.result())
  90 SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_2.results()[1], 10)
  91 SketchPoint_1 = Sketch_1.addPoint(model.selection("VERTEX", "PartSet/Origin"))
  92 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchPoint_1.coordinates())
  93 SketchConstraintCoincidence_14.setName("SketchConstraintCoincidence_15")
  94 model.do()
  95 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2f-SketchArc_2_2r-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_8f-SketchLine_9f-SketchArc_1_2r-SketchLine_10f")], model.selection(), "b/2", "b/2")
  96 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
  97 SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_9][Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_1/To_Face]"))
  98 SketchCircle_1 = Sketch_2.addCircle(-15, 35.00000000000001, 25)
  99 SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchPoint_2.result(), SketchCircle_1.center())
 100 SketchConstraintCoincidence_15.setName("SketchConstraintCoincidence_16")
 101 SketchConstraintRadius_3 = Sketch_2.setRadius(SketchCircle_1.results()[1], "50/2")
 102 model.do()
 103 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchCircle_1_2f_wire")], model.selection(), 0, 13, [model.selection("SOLID", "Extrusion_1_1")])
 104 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modified_Face&ExtrusionCut_1_1/From_Face"))
 105 SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Generated_Vertex&ExtrusionCut_1_1/From_Face"))
 106 SketchLine_11 = Sketch_3.addLine(model.selection("EDGE", "([ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_1_2][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_9])([Extrusion_1_1/From_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_9])2([Extrusion_1_1/From_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_1_2])2([ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/To_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_9])2"))
 107 SketchArc_3 = Sketch_3.addArc(-15, 35.00000000000001, -15, 46.0103340429751, -17.02045759563166, 24.17663606626138, True)
 108 SketchConstraintCoincidence_16 = Sketch_3.setCoincident(SketchPoint_3.result(), SketchArc_3.center())
 109 SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_17")
 110 SketchConstraintCoincidence_17 = Sketch_3.setCoincident(SketchLine_11.result(), SketchArc_3.startPoint())
 111 SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_18")
 112 SketchArc_4 = Sketch_3.addArc(model.selection("EDGE", "([ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_1_2][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_9])([Extrusion_1_1/From_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_9])2([Extrusion_1_1/From_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_1_2])2([ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/To_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_1_2])2"))
 113 SketchConstraintCoincidence_18 = Sketch_3.setCoincident(SketchArc_3.endPoint(), SketchArc_4.results()[1])
 114 SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_19")
 115 SketchLine_12 = Sketch_3.addLine(-15, 46.0103340429751, -15, 35.00000000000001)
 116 SketchConstraintCoincidence_19 = Sketch_3.setCoincident(SketchArc_3.startPoint(), SketchLine_12.startPoint())
 117 SketchConstraintCoincidence_19.setName("SketchConstraintCoincidence_20")
 118 SketchConstraintCoincidence_20 = Sketch_3.setCoincident(SketchPoint_3.coordinates(), SketchLine_12.endPoint())
 119 SketchConstraintCoincidence_20.setName("SketchConstraintCoincidence_21")
 120 SketchArc_5 = Sketch_3.addArc(-45, 35, -15, 35.00000000000001, -17.02045759563121, 24.17663606626137, True)
 121 SketchConstraintCoincidence_21 = Sketch_3.setCoincident(SketchArc_4.result(), SketchArc_5.center())
 122 SketchConstraintCoincidence_21.setName("SketchConstraintCoincidence_22")
 123 SketchConstraintCoincidence_22 = Sketch_3.setCoincident(SketchPoint_3.coordinates(), SketchArc_5.startPoint())
 124 SketchConstraintCoincidence_22.setName("SketchConstraintCoincidence_23")
 125 SketchConstraintCoincidence_23 = Sketch_3.setCoincident(SketchArc_3.results()[1], SketchArc_5.endPoint())
 126 SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_24")
 127 model.do()
 128 ExtrusionFuse_1 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchArc_3_2f-SketchLine_12f-SketchArc_5_2r")], model.selection(), 5, 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
 129 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_1_1/To_Face"))
 130 SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "[ExtrusionFuse_1_1/Generated_Face&Sketch_3/SketchArc_5_2][ExtrusionFuse_1_1/Generated_Face&Sketch_3/SketchLine_12][ExtrusionFuse_1_1/To_Face]"))
 131 SketchCircle_2 = Sketch_4.addCircle(-15, 35.00000000000001, 5)
 132 SketchConstraintCoincidence_24 = Sketch_4.setCoincident(SketchPoint_4.result(), SketchCircle_2.center())
 133 SketchConstraintCoincidence_24.setName("SketchConstraintCoincidence_25")
 134 SketchConstraintRadius_4 = Sketch_4.setRadius(SketchCircle_2.results()[1], "10/2")
 135 model.do()
 136 ExtrusionFuse_2 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchCircle_2_2f")], model.selection(), 8, 0, [model.selection("SOLID", "ExtrusionFuse_1_1")])
 137 Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/To_Face"))
 138 SketchArc_6 = Sketch_5.addArc(model.selection("EDGE", "[ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/To_Face][ExtrusionFuse_1_1/Modified_Face&Sketch_1/SketchArc_1_2]"))
 139 SketchArc_7 = Sketch_5.addArc(-45, 35, -45, 5, -25.41666666666737, 12.27351642784166, False)
 140 SketchConstraintCoincidence_25 = Sketch_5.setCoincident(SketchArc_6.result(), SketchArc_7.center())
 141 SketchConstraintCoincidence_25.setName("SketchConstraintCoincidence_26")
 142 SketchCircle_3 = Sketch_5.addCircle(model.selection("EDGE", "[ExtrusionFuse_2_1/Generated_Face&Sketch_4/SketchCircle_2_2][ExtrusionFuse_2_1/To_Face]"))
 143 SketchArc_8 = Sketch_5.addArc(-15, 35.00000000000001, -25.41666666666737, 12.27351642784166, -30.00000000000075, 14.99999999999944, True)
 144 SketchConstraintCoincidence_26 = Sketch_5.setCoincident(SketchCircle_3.result(), SketchArc_8.center())
 145 SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_27")
 146 SketchConstraintCoincidence_27 = Sketch_5.setCoincident(SketchArc_6.endPoint(), SketchArc_8.startPoint())
 147 SketchConstraintCoincidence_27.setName("SketchConstraintCoincidence_28")
 148 SketchConstraintCoincidence_28 = Sketch_5.setCoincident(SketchArc_7.endPoint(), SketchArc_8.results()[1])
 149 SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_29")
 150 SketchConstraintCoincidence_29 = Sketch_5.setCoincident(SketchArc_7.startPoint(), SketchArc_6.startPoint())
 151 SketchConstraintCoincidence_29.setName("SketchConstraintCoincidence_30")
 152 SketchLine_13 = Sketch_5.addLine(-45, 5, -45, 10)
 153 SketchConstraintCoincidence_30 = Sketch_5.setCoincident(SketchArc_6.startPoint(), SketchLine_13.startPoint())
 154 SketchConstraintCoincidence_30.setName("SketchConstraintCoincidence_31")
 155 SketchConstraintVertical_5 = Sketch_5.setVertical(SketchLine_13.result())
 156 SketchConstraintLength_1 = Sketch_5.setLength(SketchLine_13.result(), 5)
 157 SketchArc_9 = Sketch_5.addArc(-45, 35, -45, 10, -30.00000000000075, 14.99999999999944, False)
 158 SketchConstraintCoincidence_31 = Sketch_5.setCoincident(SketchArc_6.center(), SketchArc_9.center())
 159 SketchConstraintCoincidence_31.setName("SketchConstraintCoincidence_32")
 160 SketchConstraintCoincidence_32 = Sketch_5.setCoincident(SketchArc_8.endPoint(), SketchArc_9.endPoint())
 161 SketchConstraintCoincidence_32.setName("SketchConstraintCoincidence_33")
 162 SketchConstraintCoincidence_33 = Sketch_5.setCoincident(SketchArc_9.startPoint(), SketchLine_13.endPoint())
 163 SketchConstraintCoincidence_33.setName("SketchConstraintCoincidence_34")
 164 model.do()
 165 ExtrusionFuse_3 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_7_2f-SketchArc_8_2r-SketchArc_9_2r-SketchLine_13r")], model.selection(), 0, 8, [model.selection("SOLID", "ExtrusionFuse_2_1")])
 166 Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_3_1/Modified_Face&Extrusion_1_1/To_Face"))
 167 SketchLine_14 = Sketch_6.addLine(model.selection("EDGE", "[ExtrusionFuse_3_1/Modified_Face&Extrusion_1_1/To_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5]"))
 168 SketchArc_10 = Sketch_6.addArc(55, 35, 55, 15, 35, 35, True)
 169 SketchConstraintCoincidence_34 = Sketch_6.setCoincident(SketchLine_14.result(), SketchArc_10.center())
 170 SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_35")
 171 SketchConstraintCoincidence_35 = Sketch_6.setCoincident(SketchLine_14.result(), SketchArc_10.startPoint())
 172 SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_36")
 173 SketchLine_15 = Sketch_6.addLine(model.selection("EDGE", "[ExtrusionFuse_3_1/Modified_Face&Extrusion_1_1/To_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4]"))
 174 SketchConstraintDistance_8 = Sketch_6.setDistance(SketchArc_10.center(), SketchLine_15.result(), 35, False)
 175 SketchLine_16 = Sketch_6.addLine(35, 35, 35, 47.99999999999999)
 176 SketchConstraintCoincidence_36 = Sketch_6.setCoincident(SketchArc_10.endPoint(), SketchLine_16.startPoint())
 177 SketchConstraintCoincidence_36.setName("SketchConstraintCoincidence_37")
 178 SketchLine_17 = Sketch_6.addLine(model.selection("EDGE", "[ExtrusionFuse_3_1/Modified_Face&Extrusion_1_1/To_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6]"))
 179 SketchConstraintCoincidence_37 = Sketch_6.setCoincident(SketchLine_16.endPoint(), SketchLine_17.result())
 180 SketchConstraintCoincidence_37.setName("SketchConstraintCoincidence_38")
 181 SketchConstraintVertical_6 = Sketch_6.setVertical(SketchLine_16.result())
 182 SketchConstraintTangent_4 = Sketch_6.setTangent(SketchLine_16.result(), SketchArc_10.results()[1])
 183 SketchConstraintRadius_5 = Sketch_6.setRadius(SketchArc_10.results()[1], 20)
 184 SketchLine_18 = Sketch_6.addLine(55, 15, 55, 47.99999999999999)
 185 SketchConstraintCoincidence_38 = Sketch_6.setCoincident(SketchArc_10.startPoint(), SketchLine_18.startPoint())
 186 SketchConstraintCoincidence_38.setName("SketchConstraintCoincidence_39")
 187 SketchConstraintCoincidence_39 = Sketch_6.setCoincident(SketchLine_14.endPoint(), SketchLine_18.endPoint())
 188 SketchConstraintCoincidence_39.setName("SketchConstraintCoincidence_40")
 189 SketchLine_19 = Sketch_6.addLine(35, 47.99999999999999, 55, 47.99999999999999)
 190 SketchConstraintCoincidence_40 = Sketch_6.setCoincident(SketchLine_16.endPoint(), SketchLine_19.startPoint())
 191 SketchConstraintCoincidence_40.setName("SketchConstraintCoincidence_41")
 192 SketchConstraintCoincidence_41 = Sketch_6.setCoincident(SketchLine_14.endPoint(), SketchLine_19.endPoint())
 193 SketchConstraintCoincidence_41.setName("SketchConstraintCoincidence_42")
 194 model.do()
 195 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_6/Face-SketchArc_10_2f-SketchLine_18f-SketchLine_19r-SketchLine_16r_wire")], model.selection(), 0, 9, [model.selection("SOLID", "ExtrusionFuse_3_1")])
 196 Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_2_1/From_Face"))
 197 SketchCircle_4 = Sketch_7.addCircle(45, -35, 5)
 198 SketchLine_20 = Sketch_7.addLine(model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Sketch_1/SketchLine_5][ExtrusionCut_2_1/From_Face]"))
 199 SketchConstraintDistance_9 = Sketch_7.setDistance(SketchCircle_4.center(), SketchLine_20.result(), 10, False)
 200 SketchConstraintRadius_6 = Sketch_7.setRadius(SketchCircle_4.results()[1], "10/2")
 201 SketchLine_21 = Sketch_7.addLine(35, -35, 45, -35)
 202 SketchLine_21.setAuxiliary(True)
 203 SketchPoint_5 = Sketch_7.addPoint(model.selection("VERTEX", "[ExtrusionCut_2_1/Generated_Face&Sketch_6/SketchLine_16][ExtrusionCut_2_1/Generated_Face&Sketch_6/SketchArc_10_2][ExtrusionCut_2_1/From_Face]"))
 204 SketchConstraintCoincidence_42 = Sketch_7.setCoincident(SketchLine_21.startPoint(), SketchPoint_5.result())
 205 SketchConstraintCoincidence_42.setName("SketchConstraintCoincidence_43")
 206 SketchConstraintCoincidence_43 = Sketch_7.setCoincident(SketchCircle_4.center(), SketchLine_21.endPoint())
 207 SketchConstraintCoincidence_43.setName("SketchConstraintCoincidence_44")
 208 SketchConstraintHorizontal_4 = Sketch_7.setHorizontal(SketchLine_21.result())
 209 model.do()
 210 ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_7/Face-SketchCircle_4_2r")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/From_Face"), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
 211 Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_8"))
 212 SketchLine_22 = Sketch_8.addLine(55, 25, 5.000000000000002, 25)
 213 SketchLine_23 = Sketch_8.addLine(5.000000000000002, 25, 5.000000000000002, 13)
 214 SketchLine_24 = Sketch_8.addLine(5.000000000000002, 13, 55, 13)
 215 SketchLine_25 = Sketch_8.addLine(55, 13, 55, 25)
 216 SketchConstraintCoincidence_44 = Sketch_8.setCoincident(SketchLine_25.endPoint(), SketchLine_22.startPoint())
 217 SketchConstraintCoincidence_44.setName("SketchConstraintCoincidence_45")
 218 SketchConstraintCoincidence_45 = Sketch_8.setCoincident(SketchLine_22.endPoint(), SketchLine_23.startPoint())
 219 SketchConstraintCoincidence_45.setName("SketchConstraintCoincidence_46")
 220 SketchConstraintCoincidence_46 = Sketch_8.setCoincident(SketchLine_23.endPoint(), SketchLine_24.startPoint())
 221 SketchConstraintCoincidence_46.setName("SketchConstraintCoincidence_47")
 222 SketchConstraintCoincidence_47 = Sketch_8.setCoincident(SketchLine_24.endPoint(), SketchLine_25.startPoint())
 223 SketchConstraintCoincidence_47.setName("SketchConstraintCoincidence_48")
 224 SketchConstraintHorizontal_5 = Sketch_8.setHorizontal(SketchLine_22.result())
 225 SketchConstraintVertical_7 = Sketch_8.setVertical(SketchLine_23.result())
 226 SketchConstraintHorizontal_6 = Sketch_8.setHorizontal(SketchLine_24.result())
 227 SketchConstraintVertical_8 = Sketch_8.setVertical(SketchLine_25.result())
 228 SketchConstraintLength_2 = Sketch_8.setLength(SketchLine_22.result(), 50)
 229 SketchConstraintLength_3 = Sketch_8.setLength(SketchLine_25.result(), 12)
 230 SketchProjection_1 = Sketch_8.addProjection(model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Sketch_1/SketchLine_5][ExtrusionCut_2_1/Modified_Face&Sketch_1/SketchLine_6]"), False)
 231 SketchLine_26 = SketchProjection_1.createdFeature()
 232 SketchConstraintCoincidence_48 = Sketch_8.setCoincident(SketchLine_22.startPoint(), SketchLine_26.result())
 233 SketchConstraintCoincidence_48.setName("SketchConstraintCoincidence_49")
 234 SketchLine_27 = Sketch_8.addLine(model.selection("EDGE", "[ExtrusionCut_3_1/Modified_Face&Extrusion_1_1/From_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_8]"))
 235 SketchConstraintCoincidence_49 = Sketch_8.setCoincident(SketchLine_22.startPoint(), SketchLine_27.result())
 236 SketchConstraintCoincidence_49.setName("SketchConstraintCoincidence_50")
 237 model.do()
 238 ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_22r-SketchLine_23f-SketchLine_24f-SketchLine_25f")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4"), 0, [model.selection("SOLID", "ExtrusionCut_3_1")])
 239 Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_1_1/Modified_Face&Sketch_1/SketchLine_9"))
 240 SketchLine_28 = Sketch_9.addLine(25, -45, 18.44853578320833, -63)
 241 SketchLine_29 = Sketch_9.addLine(model.selection("EDGE", "[ExtrusionFuse_1_1/Modified_Face&Sketch_1/SketchLine_9][ExtrusionCut_4_1/Modified_Face&Sketch_1/SketchLine_8]"))
 242 SketchConstraintCoincidence_50 = Sketch_9.setCoincident(SketchLine_28.endPoint(), SketchLine_29.result())
 243 SketchConstraintCoincidence_50.setName("SketchConstraintCoincidence_51")
 244 SketchLine_30 = Sketch_9.addLine(model.selection("EDGE", "[ExtrusionCut_4_1/Modified_Face&Extrusion_1_1/From_Face][ExtrusionFuse_1_1/Modified_Face&Sketch_1/SketchLine_9]"))
 245 SketchConstraintCoincidence_51 = Sketch_9.setCoincident(SketchLine_28.startPoint(), SketchLine_30.result())
 246 SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_52")
 247 SketchConstraintAngle_3 = Sketch_9.setAngle(SketchLine_28.result(), SketchLine_30.result(), 20.00000000000009)
 248 SketchConstraintDistance_10 = Sketch_9.setDistance(SketchLine_28.startPoint(), SketchLine_29.result(), 18, False)
 249 SketchLine_31 = Sketch_9.addLine(18.44853578320833, -63, 25, -63)
 250 SketchConstraintCoincidence_52 = Sketch_9.setCoincident(SketchLine_28.endPoint(), SketchLine_31.startPoint())
 251 SketchConstraintCoincidence_52.setName("SketchConstraintCoincidence_53")
 252 SketchConstraintCoincidence_53 = Sketch_9.setCoincident(SketchLine_29.startPoint(), SketchLine_31.endPoint())
 253 SketchConstraintCoincidence_53.setName("SketchConstraintCoincidence_54")
 254 SketchLine_32 = Sketch_9.addLine(25, -63, 25, -45)
 255 SketchConstraintCoincidence_54 = Sketch_9.setCoincident(SketchLine_29.startPoint(), SketchLine_32.startPoint())
 256 SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_55")
 257 SketchConstraintCoincidence_55 = Sketch_9.setCoincident(SketchLine_28.startPoint(), SketchLine_32.endPoint())
 258 SketchConstraintCoincidence_55.setName("SketchConstraintCoincidence_56")
 259 model.do()
 260 ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_9/Face-SketchLine_28r-SketchLine_31f-SketchLine_32f")], model.selection(), model.selection(), 0, model.selection("FACE", "ExtrusionCut_4_1/Modified_Face&Sketch_1/SketchLine_5"), 0, [model.selection("SOLID", "ExtrusionCut_4_1")])
 261 Sketch_10 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_5_1/Modified_Face&Sketch_1/SketchLine_8"))
 262 SketchCircle_5 = Sketch_10.addCircle(-6.000000000000002, 4.999999999999997, 5)
 263 SketchLine_33 = Sketch_10.addLine(model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/To_Face][ExtrusionCut_5_1/Modified_Face&Sketch_1/SketchLine_8]"))
 264 SketchConstraintDistance_11 = Sketch_10.setDistance(SketchCircle_5.center(), SketchLine_33.result(), 30, False)
 265 SketchLine_34 = Sketch_10.addLine(model.selection("EDGE", "[ExtrusionCut_5_1/Modified_Face&Sketch_1/SketchLine_9][ExtrusionCut_5_1/Modified_Face&Sketch_1/SketchLine_8]"))
 266 SketchConstraintDistance_12 = Sketch_10.setDistance(SketchCircle_5.result(), SketchLine_34.result(), 9, False)
 267 SketchConstraintRadius_7 = Sketch_10.setRadius(SketchCircle_5.results()[1], "10/2")
 268 model.do()
 269 ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_10/Face-SketchCircle_5_2r")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1"), 0, [model.selection("SOLID", "ExtrusionCut_5_1")])
 270 model.do()
 271
 272 # Test reexecution after parameter change
 273 Parameter_A.setValue(62)
 274 model.do()
 275 model.testResultsVolumes(ExtrusionCut_6, [141392.1882461419])
 276 Parameter_A.setValue(63)
 277 model.do()
 278
 279 from GeomAPI import GeomAPI_Shape
 280
 281 model.testNbResults(ExtrusionCut_6, 1)
 282 model.testNbSubResults(ExtrusionCut_6, [0])
 283 model.testNbSubShapes(ExtrusionCut_6, GeomAPI_Shape.SOLID, [1])
 284 model.testNbSubShapes(ExtrusionCut_6, GeomAPI_Shape.FACE, [37])
 285 model.testNbSubShapes(ExtrusionCut_6, GeomAPI_Shape.EDGE, [192])
 286 model.testNbSubShapes(ExtrusionCut_6, GeomAPI_Shape.VERTEX, [384])
 287 model.testResultsVolumes(ExtrusionCut_6, [144033.64842978157685])
 288
 289 model.end()
 290
 291 assert(model.checkPythonDump())