test.models/CSWA.py

   1 from SketchAPI import *
   2
   3 from salome.shaper import model
   4
   5 model.begin()
   6 partSet = model.moduleDocument()
   7 Part_1 = model.addPart(partSet)
   8 Part_1_doc = Part_1.document()
   9 Parameter_A = model.addParameter(Part_1_doc, "a", "63")
  10 model.addParameter(Part_1_doc, "b", "50")
  11 model.addParameter(Part_1_doc, "c", "100")
  12 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
  13 SketchLine_1 = Sketch_1.addLine(-45, 0, 0, 0)
  14 SketchLine_2 = Sketch_1.addLine(0, 0, 23.33965093306752, 8.494938217797719)
  15 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  16 SketchLine_3 = Sketch_1.addLine(33.83092017818969, 6.16907982180411, 40, 0)
  17 SketchLine_4 = Sketch_1.addLine(40, 0, 55, 0)
  18 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  19 SketchConstraintCoincidence_2.setName("SketchConstraintCoincidence_3")
  20 SketchLine_5 = Sketch_1.addLine(55, 0, 55, 48)
  21 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  22 SketchConstraintCoincidence_3.setName("SketchConstraintCoincidence_4")
  23 SketchLine_6 = Sketch_1.addLine(55, 48, 15, 48)
  24 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  25 SketchConstraintCoincidence_4.setName("SketchConstraintCoincidence_5")
  26 SketchLine_7 = Sketch_1.addLine(15, 48, 15, 63)
  27 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  28 SketchConstraintCoincidence_5.setName("SketchConstraintCoincidence_6")
  29 SketchLine_8 = Sketch_1.addLine(15, 63, -15, 63)
  30 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  31 SketchConstraintCoincidence_6.setName("SketchConstraintCoincidence_7")
  32 SketchLine_9 = Sketch_1.addLine(-15, 63, -15, 35.00000000000001)
  33 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  34 SketchConstraintCoincidence_7.setName("SketchConstraintCoincidence_8")
  35 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  36 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_6.result())
  37 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_8.result())
  38 SketchConstraintCollinear_1 = Sketch_1.setCollinear(SketchLine_1.result(), SketchLine_4.result())
  39 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_5.result())
  40 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_9.result())
  41 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_7.result())
  42 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_3.endPoint(), SketchLine_4.endPoint(), 15)
  43 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_3.endPoint(), SketchLine_1.endPoint(), 40)
  44 SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_1.startPoint(), SketchLine_4.endPoint(), "c")
  45 SketchConstraintDistance_4 = Sketch_1.setDistance(SketchLine_8.startPoint(), SketchLine_6.result(), 15)
  46 SketchConstraintDistance_5 = Sketch_1.setDistance(SketchLine_8.startPoint(), SketchLine_5.result(), 40)
  47 SketchLine_10 = Sketch_1.addLine(-45, 4.999999999999999, -45, 0)
  48 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_10.endPoint())
  49 SketchConstraintCoincidence_8.setName("SketchConstraintCoincidence_9")
  50 SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_10.result())
  51 SketchConstraintDistance_6 = Sketch_1.setDistance(SketchLine_9.startPoint(), SketchLine_1.result(), "a")
  52 SketchArc_1 = Sketch_1.addArc(-45, 35, -45, 4.999999999999999, -15, 35.00000000000001, False)
  53 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_10.result())
  54 SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_10")
  55 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_10.startPoint())
  56 SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_11")
  57 SketchConstraintAngle_1 = Sketch_1.setAngle(SketchLine_3.result(), SketchLine_1.result(), 45)
  58 SketchConstraintAngle_2 = Sketch_1.setAngleBackward(SketchLine_2.result(), SketchLine_4.result(), 20)
  59 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_9.endPoint())
  60 SketchConstraintCoincidence_11.setName("SketchConstraintCoincidence_12")
  61 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_9.result())
  62 SketchConstraintDistance_7 = Sketch_1.setDistance(SketchArc_1.center(), SketchLine_1.result(), 35)
  63 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], 30)
  64 SketchArc_2 = Sketch_1.addArc(26.75985236632421, -0.9019879900613652, 33.83092017818969, 6.16907982180411, 23.33965093306752, 8.494938217797719, False)
  65 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_3.startPoint())
  66 SketchConstraintCoincidence_12.setName("SketchConstraintCoincidence_13")
  67 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_2.endPoint())
  68 SketchConstraintCoincidence_13.setName("SketchConstraintCoincidence_14")
  69 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_2.result())
  70 SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_3.result())
  71 SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_2.results()[1], 10)
  72 SketchPoint_1 = Sketch_1.addPoint(model.selection("VERTEX", "PartSet/Origin"))
  73 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchPoint_1.coordinates())
  74 SketchConstraintCoincidence_14.setName("SketchConstraintCoincidence_15")
  75 model.do()
  76 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_2f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_8f-SketchLine_9f-SketchLine_10f-SketchArc_1_2r-SketchArc_2_2r")], model.selection(), "b/2", "b/2")
  77 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face_1"))
  78 SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_10&Extrusion_1_1/Generated_Face_9&Extrusion_1_1/To_Face_1"))
  79 SketchCircle_1 = Sketch_2.addCircle(-15, 35.00000000000001, 25)
  80 SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchPoint_2.result(), SketchCircle_1.center())
  81 SketchConstraintCoincidence_15.setName("SketchConstraintCoincidence_16")
  82 SketchConstraintRadius_3 = Sketch_2.setRadius(SketchCircle_1.results()[1], "50/2")
  83 model.do()
  84 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_1_2f")], model.selection(), 0, 13, [model.selection("SOLID", "Extrusion_1_1")])
  85 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_4"))
  86 SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_3&ExtrusionCut_1_1/Modfied_2&ExtrusionCut_1_1/Modfied_4"))
  87 SketchLine_11 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_2&ExtrusionCut_1_1/Modfied_4"))
  88 SketchArc_3 = Sketch_3.addArc(-15, 35.00000000000001, -15, 46.0103340429751, -17.02045759563166, 24.17663606626138, True)
  89 SketchConstraintCoincidence_16 = Sketch_3.setCoincident(SketchPoint_3.result(), SketchArc_3.center())
  90 SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_17")
  91 SketchConstraintCoincidence_17 = Sketch_3.setCoincident(SketchLine_11.result(), SketchArc_3.startPoint())
  92 SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_18")
  93 SketchArc_4 = Sketch_3.addArc(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_3&ExtrusionCut_1_1/Modfied_4"))
  94 SketchConstraintCoincidence_18 = Sketch_3.setCoincident(SketchArc_3.endPoint(), SketchArc_4.results()[1])
  95 SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_19")
  96 SketchLine_12 = Sketch_3.addLine(-15, 46.0103340429751, -15, 35.00000000000001)
  97 SketchConstraintCoincidence_19 = Sketch_3.setCoincident(SketchArc_3.startPoint(), SketchLine_12.startPoint())
  98 SketchConstraintCoincidence_19.setName("SketchConstraintCoincidence_20")
  99 SketchConstraintCoincidence_20 = Sketch_3.setCoincident(SketchPoint_3.coordinates(), SketchLine_12.endPoint())
 100 SketchConstraintCoincidence_20.setName("SketchConstraintCoincidence_21")
 101 SketchArc_5 = Sketch_3.addArc(-45, 35, -15, 35.00000000000001, -17.02045759563121, 24.17663606626137, True)
 102 SketchConstraintCoincidence_21 = Sketch_3.setCoincident(SketchArc_4.result(), SketchArc_5.center())
 103 SketchConstraintCoincidence_21.setName("SketchConstraintCoincidence_22")
 104 SketchConstraintCoincidence_22 = Sketch_3.setCoincident(SketchPoint_3.coordinates(), SketchArc_5.startPoint())
 105 SketchConstraintCoincidence_22.setName("SketchConstraintCoincidence_23")
 106 SketchConstraintCoincidence_23 = Sketch_3.setCoincident(SketchArc_3.results()[1], SketchArc_5.endPoint())
 107 SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_24")
 108 model.do()
 109 ExtrusionFuse_1 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchArc_3_2f-SketchLine_12f-SketchArc_5_2r")], model.selection(), 5, 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
 110 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_1_1/To_Face_1"))
 111 SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "ExtrusionFuse_1_1/Modfied_5&ExtrusionFuse_1_1/Modfied_4&ExtrusionFuse_1_1/To_Face_1"))
 112 SketchCircle_2 = Sketch_4.addCircle(-15, 35.00000000000001, 5)
 113 SketchConstraintCoincidence_24 = Sketch_4.setCoincident(SketchPoint_4.result(), SketchCircle_2.center())
 114 SketchConstraintCoincidence_24.setName("SketchConstraintCoincidence_25")
 115 SketchConstraintRadius_4 = Sketch_4.setRadius(SketchCircle_2.results()[1], "10/2")
 116 model.do()
 117 ExtrusionFuse_2 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchCircle_2_2f")], model.selection(), 8, 0, [model.selection("SOLID", "ExtrusionFuse_1_1")])
 118 Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_1"))
 119 SketchArc_6 = Sketch_5.addArc(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&ExtrusionFuse_1_1/Modfied_3"))
 120 SketchArc_7 = Sketch_5.addArc(-45, 35, -45, 5, -25.41666666666737, 12.27351642784166, False)
 121 SketchConstraintCoincidence_25 = Sketch_5.setCoincident(SketchArc_6.result(), SketchArc_7.center())
 122 SketchConstraintCoincidence_25.setName("SketchConstraintCoincidence_26")
 123 SketchCircle_3 = Sketch_5.addCircle(model.selection("EDGE", "ExtrusionFuse_2_1/Modfied_5&ExtrusionFuse_2_1/To_Face_1"))
 124 SketchArc_8 = Sketch_5.addArc(-15, 35.00000000000001, -25.41666666666737, 12.27351642784166, -30.00000000000075, 14.99999999999944, True)
 125 SketchConstraintCoincidence_26 = Sketch_5.setCoincident(SketchCircle_3.result(), SketchArc_8.center())
 126 SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_27")
 127 SketchConstraintCoincidence_27 = Sketch_5.setCoincident(SketchArc_6.endPoint(), SketchArc_8.startPoint())
 128 SketchConstraintCoincidence_27.setName("SketchConstraintCoincidence_28")
 129 SketchConstraintCoincidence_28 = Sketch_5.setCoincident(SketchArc_7.endPoint(), SketchArc_8.results()[1])
 130 SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_29")
 131 SketchConstraintCoincidence_29 = Sketch_5.setCoincident(SketchArc_7.startPoint(), SketchArc_6.startPoint())
 132 SketchConstraintCoincidence_29.setName("SketchConstraintCoincidence_30")
 133 SketchLine_13 = Sketch_5.addLine(-45, 5, -45, 10)
 134 SketchConstraintCoincidence_30 = Sketch_5.setCoincident(SketchArc_6.startPoint(), SketchLine_13.startPoint())
 135 SketchConstraintCoincidence_30.setName("SketchConstraintCoincidence_31")
 136 SketchConstraintVertical_5 = Sketch_5.setVertical(SketchLine_13.result())
 137 SketchConstraintLength_1 = Sketch_5.setLength(SketchLine_13.result(), 5)
 138 SketchArc_9 = Sketch_5.addArc(-45, 35, -45, 10, -30.00000000000075, 14.99999999999944, False)
 139 SketchConstraintCoincidence_31 = Sketch_5.setCoincident(SketchArc_6.center(), SketchArc_9.center())
 140 SketchConstraintCoincidence_31.setName("SketchConstraintCoincidence_32")
 141 SketchConstraintCoincidence_32 = Sketch_5.setCoincident(SketchArc_8.endPoint(), SketchArc_9.endPoint())
 142 SketchConstraintCoincidence_32.setName("SketchConstraintCoincidence_33")
 143 SketchConstraintCoincidence_33 = Sketch_5.setCoincident(SketchArc_9.startPoint(), SketchLine_13.endPoint())
 144 SketchConstraintCoincidence_33.setName("SketchConstraintCoincidence_34")
 145 model.do()
 146 ExtrusionFuse_3 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_7_2f-SketchArc_8_2r-SketchLine_13r-SketchArc_9_2r")], model.selection(), 0, 8, [model.selection("SOLID", "ExtrusionFuse_2_1")])
 147 Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_3_1/Modfied_3"))
 148 SketchLine_14 = Sketch_6.addLine(model.selection("EDGE", "ExtrusionFuse_3_1/Modfied_3&Extrusion_1_1/Generated_Face_5"))
 149 SketchArc_10 = Sketch_6.addArc(55, 35, 55, 15, 35, 35, True)
 150 SketchConstraintCoincidence_34 = Sketch_6.setCoincident(SketchLine_14.result(), SketchArc_10.center())
 151 SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_35")
 152 SketchConstraintCoincidence_35 = Sketch_6.setCoincident(SketchLine_14.result(), SketchArc_10.startPoint())
 153 SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_36")
 154 SketchLine_15 = Sketch_6.addLine(model.selection("EDGE", "ExtrusionFuse_3_1/Modfied_3&Extrusion_1_1/Generated_Face_4"))
 155 SketchConstraintDistance_8 = Sketch_6.setDistance(SketchArc_10.center(), SketchLine_15.result(), 35)
 156 SketchLine_16 = Sketch_6.addLine(35, 35, 35, 48)
 157 SketchConstraintCoincidence_36 = Sketch_6.setCoincident(SketchArc_10.endPoint(), SketchLine_16.startPoint())
 158 SketchConstraintCoincidence_36.setName("SketchConstraintCoincidence_37")
 159 SketchLine_17 = Sketch_6.addLine(model.selection("EDGE", "ExtrusionFuse_3_1/Modfied_3&Extrusion_1_1/Generated_Face_6"))
 160 SketchConstraintCoincidence_37 = Sketch_6.setCoincident(SketchLine_16.endPoint(), SketchLine_17.result())
 161 SketchConstraintCoincidence_37.setName("SketchConstraintCoincidence_38")
 162 SketchConstraintVertical_6 = Sketch_6.setVertical(SketchLine_16.result())
 163 SketchConstraintTangent_4 = Sketch_6.setTangent(SketchLine_16.result(), SketchArc_10.results()[1])
 164 SketchConstraintRadius_5 = Sketch_6.setRadius(SketchArc_10.results()[1], 20)
 165 SketchLine_18 = Sketch_6.addLine(55, 15, 55, 48)
 166 SketchConstraintCoincidence_38 = Sketch_6.setCoincident(SketchArc_10.startPoint(), SketchLine_18.startPoint())
 167 SketchConstraintCoincidence_38.setName("SketchConstraintCoincidence_39")
 168 SketchConstraintCoincidence_39 = Sketch_6.setCoincident(SketchLine_14.endPoint(), SketchLine_18.endPoint())
 169 SketchConstraintCoincidence_39.setName("SketchConstraintCoincidence_40")
 170 SketchLine_19 = Sketch_6.addLine(35, 48, 55, 48)
 171 SketchConstraintCoincidence_40 = Sketch_6.setCoincident(SketchLine_16.endPoint(), SketchLine_19.startPoint())
 172 SketchConstraintCoincidence_40.setName("SketchConstraintCoincidence_41")
 173 SketchConstraintCoincidence_41 = Sketch_6.setCoincident(SketchLine_14.endPoint(), SketchLine_19.endPoint())
 174 SketchConstraintCoincidence_41.setName("SketchConstraintCoincidence_42")
 175 model.do()
 176 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_6/Wire-SketchArc_10_2f-SketchLine_16r-SketchLine_18f-SketchLine_19r")], model.selection(), 0, 9, [model.selection("SOLID", "ExtrusionFuse_3_1")])
 177 Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_2_1/Modfied_4"))
 178 SketchCircle_4 = Sketch_7.addCircle(45, 35, 5)
 179 SketchLine_20 = Sketch_7.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_1&ExtrusionCut_2_1/Modfied_4"))
 180 SketchConstraintDistance_9 = Sketch_7.setDistance(SketchCircle_4.center(), SketchLine_20.result(), 10)
 181 SketchConstraintRadius_6 = Sketch_7.setRadius(SketchCircle_4.results()[1], "10/2")
 182 SketchLine_21 = Sketch_7.addLine(35, 35, 45, 35)
 183 SketchLine_21.setAuxiliary(True)
 184 SketchPoint_5 = Sketch_7.addPoint(model.selection("VERTEX", "ExtrusionCut_2_1/Modfied_5&ExtrusionCut_2_1/Modfied_6&ExtrusionCut_2_1/Modfied_4"))
 185 SketchConstraintCoincidence_42 = Sketch_7.setCoincident(SketchLine_21.startPoint(), SketchPoint_5.result())
 186 SketchConstraintCoincidence_42.setName("SketchConstraintCoincidence_43")
 187 SketchConstraintCoincidence_43 = Sketch_7.setCoincident(SketchCircle_4.center(), SketchLine_21.endPoint())
 188 SketchConstraintCoincidence_43.setName("SketchConstraintCoincidence_44")
 189 SketchConstraintHorizontal_4 = Sketch_7.setHorizontal(SketchLine_21.result())
 190 model.do()
 191 ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_7/Face-SketchCircle_4_2f")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/From_Face_1"), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
 192 Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_8"))
 193 SketchLine_22 = Sketch_8.addLine(55, 25, 5.000000000000002, 25)
 194 SketchLine_23 = Sketch_8.addLine(5.000000000000002, 25, 5.000000000000002, 13)
 195 SketchLine_24 = Sketch_8.addLine(5.000000000000002, 13, 55, 13)
 196 SketchLine_25 = Sketch_8.addLine(55, 13, 55, 25)
 197 SketchConstraintCoincidence_44 = Sketch_8.setCoincident(SketchLine_25.endPoint(), SketchLine_22.startPoint())
 198 SketchConstraintCoincidence_44.setName("SketchConstraintCoincidence_45")
 199 SketchConstraintCoincidence_45 = Sketch_8.setCoincident(SketchLine_22.endPoint(), SketchLine_23.startPoint())
 200 SketchConstraintCoincidence_45.setName("SketchConstraintCoincidence_46")
 201 SketchConstraintCoincidence_46 = Sketch_8.setCoincident(SketchLine_23.endPoint(), SketchLine_24.startPoint())
 202 SketchConstraintCoincidence_46.setName("SketchConstraintCoincidence_47")
 203 SketchConstraintCoincidence_47 = Sketch_8.setCoincident(SketchLine_24.endPoint(), SketchLine_25.startPoint())
 204 SketchConstraintCoincidence_47.setName("SketchConstraintCoincidence_48")
 205 SketchConstraintHorizontal_5 = Sketch_8.setHorizontal(SketchLine_22.result())
 206 SketchConstraintVertical_7 = Sketch_8.setVertical(SketchLine_23.result())
 207 SketchConstraintHorizontal_6 = Sketch_8.setHorizontal(SketchLine_24.result())
 208 SketchConstraintVertical_8 = Sketch_8.setVertical(SketchLine_25.result())
 209 SketchConstraintLength_2 = Sketch_8.setLength(SketchLine_22.result(), 50)
 210 SketchConstraintLength_3 = Sketch_8.setLength(SketchLine_25.result(), 12)
 211 SketchProjection_1 = Sketch_8.addProjection(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_1&ExtrusionCut_2_1/Modfied_2"))
 212 SketchLine_26 = SketchProjection_1.createdFeature()
 213 SketchConstraintCoincidence_48 = Sketch_8.setCoincident(SketchLine_22.startPoint(), SketchLine_26.result())
 214 SketchConstraintCoincidence_48.setName("SketchConstraintCoincidence_49")
 215 SketchLine_27 = Sketch_8.addLine(model.selection("EDGE", "ExtrusionCut_3_1/Modfied_2&Extrusion_1_1/Generated_Face_8"))
 216 SketchConstraintCoincidence_49 = Sketch_8.setCoincident(SketchLine_22.startPoint(), SketchLine_27.result())
 217 SketchConstraintCoincidence_49.setName("SketchConstraintCoincidence_50")
 218 model.do()
 219 ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_22f-SketchLine_23f-SketchLine_24f-SketchLine_25f")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), 0, [model.selection("SOLID", "ExtrusionCut_3_1")])
 220 Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_1_1/Modfied_2"))
 221 SketchLine_28 = Sketch_9.addLine(25, -45, 18.44853578320836, -63)
 222 SketchLine_29 = Sketch_9.addLine(model.selection("EDGE", "ExtrusionFuse_1_1/Modfied_2&ExtrusionCut_4_1/Modfied_6"))
 223 SketchConstraintCoincidence_50 = Sketch_9.setCoincident(SketchLine_28.endPoint(), SketchLine_29.result())
 224 SketchConstraintCoincidence_50.setName("SketchConstraintCoincidence_51")
 225 SketchLine_30 = Sketch_9.addLine(model.selection("EDGE", "ExtrusionCut_4_1/Modfied_9&ExtrusionFuse_1_1/Modfied_2"))
 226 SketchConstraintCoincidence_51 = Sketch_9.setCoincident(SketchLine_28.startPoint(), SketchLine_30.result())
 227 SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_52")
 228 SketchConstraintAngle_3 = Sketch_9.setAngle(SketchLine_28.result(), SketchLine_30.result(), 20)
 229 SketchConstraintDistance_10 = Sketch_9.setDistance(SketchLine_28.startPoint(), SketchLine_29.result(), 18)
 230 SketchLine_31 = Sketch_9.addLine(18.44853578320836, -63, 25, -63)
 231 SketchConstraintCoincidence_52 = Sketch_9.setCoincident(SketchLine_28.endPoint(), SketchLine_31.startPoint())
 232 SketchConstraintCoincidence_52.setName("SketchConstraintCoincidence_53")
 233 SketchConstraintCoincidence_53 = Sketch_9.setCoincident(SketchLine_29.startPoint(), SketchLine_31.endPoint())
 234 SketchConstraintCoincidence_53.setName("SketchConstraintCoincidence_54")
 235 SketchLine_32 = Sketch_9.addLine(25, -63, 25, -45)
 236 SketchConstraintCoincidence_54 = Sketch_9.setCoincident(SketchLine_29.startPoint(), SketchLine_32.startPoint())
 237 SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_55")
 238 SketchConstraintCoincidence_55 = Sketch_9.setCoincident(SketchLine_28.startPoint(), SketchLine_32.endPoint())
 239 SketchConstraintCoincidence_55.setName("SketchConstraintCoincidence_56")
 240 model.do()
 241 ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_9/Face-SketchLine_28f-SketchLine_31f-SketchLine_32f")], model.selection(), model.selection(), 0, model.selection("FACE", "ExtrusionCut_4_1/Modfied_3"), 0, [model.selection("SOLID", "ExtrusionCut_4_1")])
 242 Sketch_10 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_5_1/Modfied_1"))
 243 SketchCircle_5 = Sketch_10.addCircle(-6.000000000000002, 4.999999999999997, 5)
 244 SketchLine_33 = Sketch_10.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_3&ExtrusionCut_5_1/Modfied_1"))
 245 SketchConstraintDistance_11 = Sketch_10.setDistance(SketchCircle_5.center(), SketchLine_33.result(), 30)
 246 SketchLine_34 = Sketch_10.addLine(model.selection("EDGE", "ExtrusionCut_5_1/Modfied_2&ExtrusionCut_5_1/Modfied_1"))
 247 SketchConstraintDistance_12 = Sketch_10.setDistance(SketchCircle_5.result(), SketchLine_34.result(), 9)
 248 SketchConstraintRadius_7 = Sketch_10.setRadius(SketchCircle_5.results()[1], "10/2")
 249 model.do()
 250 ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_10/Face-SketchCircle_5_2f")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face_12"), 0, [model.selection("SOLID", "ExtrusionCut_5_1")])
 251 model.do()
 252
 253 # Test reexecution after parameter change
 254 Parameter_A.setValue(62)
 255 model.do()
 256 model.testResultsVolumes(ExtrusionCut_6, [141392.1882461419])
 257 Parameter_A.setValue(63)
 258 model.do()
 259
 260 from GeomAPI import GeomAPI_Shape
 261
 262 model.testNbResults(ExtrusionCut_6, 1)
 263 model.testNbSubResults(ExtrusionCut_6, [0])
 264 model.testNbSubShapes(ExtrusionCut_6, GeomAPI_Shape.SOLID, [1])
 265 model.testNbSubShapes(ExtrusionCut_6, GeomAPI_Shape.FACE, [37])
 266 model.testNbSubShapes(ExtrusionCut_6, GeomAPI_Shape.EDGE, [192])
 267 model.testNbSubShapes(ExtrusionCut_6, GeomAPI_Shape.VERTEX, [384])
 268 model.testResultsVolumes(ExtrusionCut_6, [144033.64842978157685])
 269
 270 model.end()
 271
 272 assert(model.checkPythonDump)