test.compatibility/piece_02.py

   1 # -*- coding: utf-8 -*-
   2
   3 # Copyright (C) 2014-2019  CEA/DEN, EDF R&D
   4 #
   5 # This library is free software; you can redistribute it and/or
   6 # modify it under the terms of the GNU Lesser General Public
   7 # License as published by the Free Software Foundation; either
   8 # version 2.1 of the License, or (at your option) any later version.
   9 #
  10 # This library is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  13 # Lesser General Public License for more details.
  14 #
  15 # You should have received a copy of the GNU Lesser General Public
  16 # License along with this library; if not, write to the Free Software
  17 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  18 #
  19 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  20 #
  21
  22 from salome.shaper import model
  23
  24 model.begin()
  25 partSet = model.moduleDocument()
  26 Part_1 = model.addPart(partSet)
  27 Part_1_doc = Part_1.document()
  28 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
  29 SketchLine_1 = Sketch_1.addLine(0, 4.99999999998656, 0, 40.99999999998656)
  30 SketchLine_2 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OZ"))
  31 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_2.result())
  32 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.result())
  33 SketchLine_3 = Sketch_1.addLine(4.999999999986844, 0, 36.99999999998685, 0)
  34 SketchLine_4 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OX"))
  35 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchLine_4.result())
  36 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.result())
  37 SketchLine_5 = Sketch_1.addLine(4.999999999999999, 45.99999999998655, 37, 45.99999999998655)
  38 SketchLine_6 = Sketch_1.addLine(42, 40.99999999998655, 42, 4.999999999986548)
  39 SketchArc_1 = Sketch_1.addArc(5, 40.99999999998656, 0, 40.99999999998656, 4.999999999999999, 45.99999999998656, True)
  40 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchArc_1.startPoint())
  41 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchLine_1.result(), SketchArc_1.results()[1])
  42 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_5.result(), SketchArc_1.endPoint())
  43 SketchArc_2 = Sketch_1.addArc(37, 40.99999999998655, 37, 45.99999999998655, 42, 40.99999999998655, True)
  44 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchArc_2.startPoint())
  45 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchLine_5.result(), SketchArc_2.results()[1])
  46 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_6.result(), SketchArc_2.endPoint())
  47 SketchArc_3 = Sketch_1.addArc(4.999999999986827, 4.999999999986823, 0, 4.99999999998656, 4.999999999986844, 0, False)
  48 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchArc_3.startPoint())
  49 SketchConstraintTangent_3 = Sketch_1.setTangent(SketchLine_1.result(), SketchArc_3.results()[1])
  50 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_3.result(), SketchArc_3.endPoint())
  51 SketchArc_4 = Sketch_1.addArc(36.99999999998375, 5.000000000004257, 36.99999999998685, 0, 42, 4.999999999986548, False)
  52 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_4.startPoint())
  53 SketchConstraintTangent_4 = Sketch_1.setTangent(SketchLine_3.result(), SketchArc_4.results()[1])
  54 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_6.result(), SketchArc_4.endPoint())
  55 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_6.result())
  56 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_5.result())
  57 SketchConstraintEqual_1 = Sketch_1.setEqual(SketchLine_5.result(), SketchLine_3.result())
  58 SketchConstraintEqual_2 = Sketch_1.setEqual(SketchLine_6.result(), SketchLine_1.result())
  59 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_5.startPoint())
  60 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_6.startPoint())
  61 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchArc_4.endPoint())
  62 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchArc_3.endPoint(), SketchLine_3.startPoint())
  63 SketchConstraintTangent_5 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_6.result())
  64 SketchConstraintTangent_6 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchLine_5.result())
  65 SketchConstraintTangent_7 = Sketch_1.setTangent(SketchArc_3.results()[1], SketchLine_3.result())
  66 SketchConstraintEqual_3 = Sketch_1.setEqual(SketchArc_1.results()[1], SketchArc_2.results()[1])
  67 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_2.results()[1], 5)
  68 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 36)
  69 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_5.result(), 32)
  70 SketchConstraintTangent_8 = Sketch_1.setTangent(SketchArc_4.results()[1], SketchLine_6.result())
  71 model.do()
  72 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchArc_3_2f-SketchLine_3f-SketchArc_4_2f-SketchLine_6r-SketchArc_2_2f-SketchLine_5r-SketchArc_1_2f-SketchLine_1r")], model.selection(), 76, 0)
  73 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
  74 SketchLine_7 = Sketch_2.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/To_Face]"))
  75 SketchLine_7.setName("SketchLine_8")
  76 SketchLine_7.result().setName("SketchLine_8")
  77 SketchLine_8 = Sketch_2.addLine(21, 45.99999999998655, 20.99999999998684, 0)
  78 SketchLine_8.setName("SketchLine_9")
  79 SketchLine_8.result().setName("SketchLine_9")
  80 SketchLine_8.setAuxiliary(True)
  81 SketchLine_9 = Sketch_2.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5][Extrusion_1_1/To_Face]"))
  82 SketchLine_9.setName("SketchLine_10")
  83 SketchLine_9.result().setName("SketchLine_10")
  84 SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_8.startPoint(), SketchLine_9.result())
  85 SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_18")
  86 SketchLine_10 = Sketch_2.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/To_Face]"))
  87 SketchLine_10.setName("SketchLine_11")
  88 SketchLine_10.result().setName("SketchLine_11")
  89 SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_10.result())
  90 SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_19")
  91 SketchConstraintMiddle_1 = Sketch_2.setMiddlePoint(SketchLine_8.startPoint(), SketchLine_9.result())
  92 SketchConstraintMiddle_2 = Sketch_2.setMiddlePoint(SketchLine_8.endPoint(), SketchLine_10.result())
  93 SketchLine_11 = Sketch_2.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_1_1/To_Face]"))
  94 SketchLine_11.setName("SketchLine_12")
  95 SketchLine_11.result().setName("SketchLine_12")
  96 SketchPoint_1 = Sketch_2.addPoint(20.99999999999342, 22.99999999999327)
  97 SketchConstraintCoincidence_19 = Sketch_2.setCoincident(SketchPoint_1.coordinates(), SketchLine_8.result())
  98 SketchConstraintCoincidence_19.setName("SketchConstraintCoincidence_20")
  99 SketchConstraintMiddle_3 = Sketch_2.setMiddlePoint(SketchPoint_1.coordinates(), SketchLine_8.result())
 100 SketchCircle_1 = Sketch_2.addCircle(20.99999999999342, 22.99999999999327, 19)
 101 SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchPoint_1.coordinates(), SketchCircle_1.center())
 102 SketchConstraintCoincidence_20.setName("SketchConstraintCoincidence_21")
 103 SketchConstraintRadius_2 = Sketch_2.setRadius(SketchCircle_1.results()[1], 19)
 104 SketchCircle_2 = Sketch_2.addCircle(12.99999999999342, 22.99999999998655, 2.5)
 105 SketchCircle_3 = Sketch_2.addCircle(28.99999999999342, 22.99999999998655, 2.5)
 106 SketchCircle_4 = Sketch_2.addCircle(20.99999999999113, 14.99999999998655, 2.5)
 107 SketchConstraintCoincidence_21 = Sketch_2.setCoincident(SketchLine_8.result(), SketchCircle_4.center())
 108 SketchConstraintCoincidence_21.setName("SketchConstraintCoincidence_22")
 109 SketchConstraintEqual_4 = Sketch_2.setEqual(SketchCircle_2.results()[1], SketchCircle_3.results()[1])
 110 SketchConstraintEqual_5 = Sketch_2.setEqual(SketchCircle_3.results()[1], SketchCircle_4.results()[1])
 111 SketchLine_12 = Sketch_2.addLine(2.465190328815662e-32, 22.99999999998655, 41.99999999999999, 22.99999999998655)
 112 SketchLine_12.setName("SketchLine_13")
 113 SketchLine_12.result().setName("SketchLine_13")
 114 SketchLine_12.setAuxiliary(True)
 115 SketchConstraintCoincidence_22 = Sketch_2.setCoincident(SketchLine_12.startPoint(), SketchLine_7.result())
 116 SketchConstraintCoincidence_22.setName("SketchConstraintCoincidence_23")
 117 SketchConstraintCoincidence_23 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_11.result())
 118 SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_24")
 119 SketchConstraintHorizontal_2 = Sketch_2.setHorizontal(SketchLine_12.result())
 120 SketchConstraintDistance_1 = Sketch_2.setDistance(SketchCircle_2.center(), SketchCircle_3.center(), 16)
 121 SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchCircle_2.center(), SketchLine_12.result())
 122 SketchConstraintCoincidence_24.setName("SketchConstraintCoincidence_25")
 123 SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchCircle_3.center(), SketchLine_12.result())
 124 SketchConstraintCoincidence_25.setName("SketchConstraintCoincidence_26")
 125 SketchConstraintDistance_2 = Sketch_2.setDistance(SketchCircle_2.center(), SketchLine_8.result(), 8)
 126 SketchConstraintMiddle_4 = Sketch_2.setMiddlePoint(SketchLine_12.endPoint(), SketchLine_11.result())
 127 SketchConstraintRadius_3 = Sketch_2.setRadius(SketchCircle_2.results()[1], 2.5)
 128 SketchConstraintDistance_3 = Sketch_2.setDistance(SketchLine_12.result(), SketchCircle_4.center(), 8)
 129 model.do()
 130 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchCircle_1_2f-SketchCircle_2_2r-SketchCircle_3_2r-SketchCircle_4_2r_wire"), model.selection("WIRE", "Sketch_2/Face-SketchCircle_1_2f-SketchCircle_2_2r-SketchCircle_3_2r-SketchCircle_4_2r_wire_2"), model.selection("WIRE", "Sketch_2/Face-SketchCircle_3_2f_wire")], model.selection(), 0, 15, [model.selection("SOLID", "Extrusion_1_1")])
 131 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_4_2f")], model.selection(), model.selection("FACE", "Extrusion_1_1/From_Face"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
 132 Sketch_3 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
 133 SketchCircle_5 = Sketch_3.addCircle(20.99999999999342, 22.99999999999327, 19)
 134 SketchConstraintRadius_4 = Sketch_3.setRadius(SketchCircle_5.results()[1], 19)
 135 SketchLine_13 = Sketch_3.addLine(41.99999999999999, 22.99999999998655, 0, 22.99999999998656)
 136 SketchLine_13.setName("SketchLine_14")
 137 SketchLine_13.result().setName("SketchLine_14")
 138 SketchLine_13.setAuxiliary(True)
 139 SketchLine_14 = Sketch_3.addLine(model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/From_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6]"))
 140 SketchLine_14.setName("SketchLine_15")
 141 SketchLine_14.result().setName("SketchLine_15")
 142 SketchConstraintCoincidence_26 = Sketch_3.setCoincident(SketchLine_13.startPoint(), SketchLine_14.result())
 143 SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_27")
 144 SketchLine_15 = Sketch_3.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/From_Face]"))
 145 SketchLine_15.setName("SketchLine_16")
 146 SketchLine_15.result().setName("SketchLine_16")
 147 SketchConstraintCoincidence_27 = Sketch_3.setCoincident(SketchLine_13.endPoint(), SketchLine_15.result())
 148 SketchConstraintCoincidence_27.setName("SketchConstraintCoincidence_28")
 149 SketchLine_16 = Sketch_3.addLine(21, 45.99999999998655, 20.99999999998684, 0)
 150 SketchLine_16.setName("SketchLine_17")
 151 SketchLine_16.result().setName("SketchLine_17")
 152 SketchLine_16.setAuxiliary(True)
 153 SketchLine_17 = Sketch_3.addLine(model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/From_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5]"))
 154 SketchLine_17.setName("SketchLine_18")
 155 SketchLine_17.result().setName("SketchLine_18")
 156 SketchConstraintCoincidence_28 = Sketch_3.setCoincident(SketchLine_16.startPoint(), SketchLine_17.result())
 157 SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_29")
 158 SketchLine_18 = Sketch_3.addLine(model.selection("EDGE", "Sketch_1/SketchLine_3"))
 159 SketchLine_18.setName("SketchLine_19")
 160 SketchLine_18.result().setName("SketchLine_19")
 161 SketchConstraintCoincidence_29 = Sketch_3.setCoincident(SketchLine_16.endPoint(), SketchLine_18.result())
 162 SketchConstraintCoincidence_29.setName("SketchConstraintCoincidence_30")
 163 SketchConstraintMiddle_5 = Sketch_3.setMiddlePoint(SketchLine_16.startPoint(), SketchLine_17.result())
 164 SketchConstraintMiddle_6 = Sketch_3.setMiddlePoint(SketchLine_16.endPoint(), SketchLine_18.result())
 165 SketchConstraintMiddle_7 = Sketch_3.setMiddlePoint(SketchLine_13.endPoint(), SketchLine_15.result())
 166 SketchConstraintMiddle_8 = Sketch_3.setMiddlePoint(SketchLine_13.startPoint(), SketchLine_14.result())
 167 SketchPoint_2 = Sketch_3.addPoint(20.99999999999342, 22.99999999999327)
 168 SketchConstraintCoincidence_30 = Sketch_3.setCoincident(SketchPoint_2.coordinates(), SketchLine_16.result())
 169 SketchConstraintCoincidence_30.setName("SketchConstraintCoincidence_31")
 170 SketchConstraintMiddle_9 = Sketch_3.setMiddlePoint(SketchLine_16.result(), SketchPoint_2.coordinates())
 171 SketchConstraintCoincidence_31 = Sketch_3.setCoincident(SketchCircle_5.center(), SketchPoint_2.coordinates())
 172 SketchConstraintCoincidence_31.setName("SketchConstraintCoincidence_32")
 173 SketchCircle_6 = Sketch_3.addCircle(28.99999999999342, 22.99999999998655, 2.5)
 174 SketchConstraintCoincidence_32 = Sketch_3.setCoincident(SketchLine_13.result(), SketchCircle_6.center())
 175 SketchConstraintCoincidence_32.setName("SketchConstraintCoincidence_33")
 176 SketchCircle_7 = Sketch_3.addCircle(12.99999999999342, 22.99999999998656, 2.5)
 177 SketchConstraintCoincidence_33 = Sketch_3.setCoincident(SketchLine_13.result(), SketchCircle_7.center())
 178 SketchConstraintCoincidence_33.setName("SketchConstraintCoincidence_34")
 179 SketchConstraintEqual_6 = Sketch_3.setEqual(SketchCircle_7.results()[1], SketchCircle_6.results()[1])
 180 SketchConstraintRadius_5 = Sketch_3.setRadius(SketchCircle_7.results()[1], 2.5)
 181 SketchConstraintDistance_4 = Sketch_3.setDistance(SketchCircle_6.center(), SketchCircle_7.center(), 16)
 182 SketchConstraintDistance_5 = Sketch_3.setDistance(SketchCircle_6.center(), SketchLine_16.result(), 8)
 183 model.do()
 184 ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_5_2r-SketchCircle_7_2r-SketchCircle_6_2r")], model.selection(), 15, 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
 185 ExtrusionCut_3.result().setName("ExtrusionCut_3_1")
 186 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5"))
 187 SketchProjection_1 = Sketch_4.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_1_2]"), False)
 188 SketchLine_19 = SketchProjection_1.createdFeature()
 189 SketchLine_19.setName("SketchLine_20")
 190 SketchLine_19.result().setName("SketchLine_20")
 191 SketchProjection_2 = Sketch_4.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_2_2]"), False)
 192 SketchLine_20 = SketchProjection_2.createdFeature()
 193 SketchLine_20.setName("SketchLine_21")
 194 SketchLine_20.result().setName("SketchLine_21")
 195 SketchLine_21 = Sketch_4.addLine(4.999999999999999, -28, 37, -28)
 196 SketchLine_21.setName("SketchLine_22")
 197 SketchLine_21.result().setName("SketchLine_22")
 198 SketchLine_22 = Sketch_4.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5]"))
 199 SketchLine_22.setName("SketchLine_23")
 200 SketchLine_22.result().setName("SketchLine_23")
 201 SketchConstraintCoincidence_34 = Sketch_4.setCoincident(SketchLine_21.startPoint(), SketchLine_22.result())
 202 SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_35")
 203 SketchLine_23 = Sketch_4.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5][Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_2_2]"))
 204 SketchLine_23.setName("SketchLine_24")
 205 SketchLine_23.result().setName("SketchLine_24")
 206 SketchConstraintCoincidence_35 = Sketch_4.setCoincident(SketchLine_21.endPoint(), SketchLine_23.result())
 207 SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_36")
 208 SketchLine_24 = Sketch_4.addLine(4.999999999999999, -48, 37, -48)
 209 SketchLine_24.setName("SketchLine_25")
 210 SketchLine_24.result().setName("SketchLine_25")
 211 SketchConstraintCoincidence_36 = Sketch_4.setCoincident(SketchLine_24.startPoint(), SketchLine_22.result())
 212 SketchConstraintCoincidence_36.setName("SketchConstraintCoincidence_37")
 213 SketchConstraintCoincidence_37 = Sketch_4.setCoincident(SketchLine_24.endPoint(), SketchLine_23.result())
 214 SketchConstraintCoincidence_37.setName("SketchConstraintCoincidence_38")
 215 SketchConstraintHorizontal_3 = Sketch_4.setHorizontal(SketchLine_21.result())
 216 SketchConstraintHorizontal_4 = Sketch_4.setHorizontal(SketchLine_24.result())
 217 SketchLine_25 = Sketch_4.addLine(3.593262427359596e-30, -33, 0, -43)
 218 SketchLine_25.setName("SketchLine_26")
 219 SketchLine_25.result().setName("SketchLine_26")
 220 SketchConstraintCoincidence_38 = Sketch_4.setCoincident(SketchLine_25.startPoint(), SketchLine_19.result())
 221 SketchConstraintCoincidence_38.setName("SketchConstraintCoincidence_39")
 222 SketchLine_26 = Sketch_4.addLine(42, -33, 42, -43)
 223 SketchLine_26.setName("SketchLine_27")
 224 SketchLine_26.result().setName("SketchLine_27")
 225 SketchConstraintCoincidence_40 = Sketch_4.setCoincident(SketchLine_26.startPoint(), SketchLine_20.result())
 226 SketchConstraintCoincidence_40.setName("SketchConstraintCoincidence_41")
 227 SketchConstraintCoincidence_41 = Sketch_4.setCoincident(SketchLine_26.endPoint(), SketchLine_20.result())
 228 SketchConstraintCoincidence_41.setName("SketchConstraintCoincidence_42")
 229 SketchArc_5 = Sketch_4.addArc(5, -33, 3.593262427359596e-30, -33, 4.999999999999999, -28, True)
 230 SketchConstraintCoincidence_42 = Sketch_4.setCoincident(SketchLine_25.startPoint(), SketchArc_5.startPoint())
 231 SketchConstraintCoincidence_42.setName("SketchConstraintCoincidence_43")
 232 SketchConstraintTangent_9 = Sketch_4.setTangent(SketchLine_25.result(), SketchArc_5.results()[1])
 233 SketchArc_6 = Sketch_4.addArc(5, -43, 0, -43, 4.999999999999999, -48, False)
 234 SketchConstraintCoincidence_43 = Sketch_4.setCoincident(SketchLine_25.endPoint(), SketchArc_6.startPoint())
 235 SketchConstraintCoincidence_43.setName("SketchConstraintCoincidence_44")
 236 SketchConstraintTangent_10 = Sketch_4.setTangent(SketchLine_25.result(), SketchArc_6.results()[1])
 237 SketchArc_7 = Sketch_4.addArc(37, -33, 37, -28, 42, -33, True)
 238 SketchConstraintCoincidence_44 = Sketch_4.setCoincident(SketchLine_21.endPoint(), SketchArc_7.startPoint())
 239 SketchConstraintCoincidence_44.setName("SketchConstraintCoincidence_45")
 240 SketchConstraintTangent_11 = Sketch_4.setTangent(SketchLine_21.result(), SketchArc_7.results()[1])
 241 SketchArc_8 = Sketch_4.addArc(37, -43, 37, -48, 42, -43, False)
 242 SketchConstraintCoincidence_45 = Sketch_4.setCoincident(SketchLine_24.endPoint(), SketchArc_8.startPoint())
 243 SketchConstraintCoincidence_45.setName("SketchConstraintCoincidence_46")
 244 SketchConstraintTangent_12 = Sketch_4.setTangent(SketchLine_24.result(), SketchArc_8.results()[1])
 245 SketchConstraintDistance_6 = Sketch_4.setDistance(SketchLine_21.startPoint(), SketchLine_24.startPoint(), 20)
 246 SketchConstraintEqual_7 = Sketch_4.setEqual(SketchLine_26.result(), SketchLine_25.result())
 247 SketchConstraintCoincidence_46 = Sketch_4.setCoincident(SketchArc_5.endPoint(), SketchLine_21.startPoint())
 248 SketchConstraintCoincidence_46.setName("SketchConstraintCoincidence_47")
 249 SketchConstraintCoincidence_47 = Sketch_4.setCoincident(SketchLine_26.startPoint(), SketchArc_7.endPoint())
 250 SketchConstraintCoincidence_47.setName("SketchConstraintCoincidence_48")
 251 SketchConstraintCoincidence_48 = Sketch_4.setCoincident(SketchLine_26.endPoint(), SketchArc_8.endPoint())
 252 SketchConstraintCoincidence_48.setName("SketchConstraintCoincidence_49")
 253 SketchConstraintCoincidence_49 = Sketch_4.setCoincident(SketchLine_24.startPoint(), SketchArc_6.endPoint())
 254 SketchConstraintCoincidence_49.setName("SketchConstraintCoincidence_50")
 255 SketchConstraintTangent_13 = Sketch_4.setTangent(SketchArc_5.results()[1], SketchLine_21.result())
 256 SketchConstraintTangent_14 = Sketch_4.setTangent(SketchArc_7.results()[1], SketchLine_26.result())
 257 SketchConstraintTangent_15 = Sketch_4.setTangent(SketchArc_8.results()[1], SketchLine_26.result())
 258 SketchLine_27 = Sketch_4.addLine(0, -38, 42, -38)
 259 SketchLine_27.setName("SketchLine_28")
 260 SketchLine_27.result().setName("SketchLine_28")
 261 SketchLine_27.setAuxiliary(True)
 262 SketchConstraintCoincidence_51 = Sketch_4.setCoincident(SketchLine_27.endPoint(), SketchLine_20.result())
 263 SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_52")
 264 SketchConstraintMiddle_10 = Sketch_4.setMiddlePoint(SketchLine_27.endPoint(), SketchLine_20.result())
 265 SketchConstraintMiddle_11 = Sketch_4.setMiddlePoint(SketchLine_27.startPoint(), SketchLine_19.result())
 266 SketchConstraintMiddle_12 = Sketch_4.setMiddlePoint(SketchLine_25.result(), SketchLine_27.startPoint())
 267 model.do()
 268 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchArc_5_2f-SketchLine_26f-SketchArc_6_2f-SketchLine_25f-SketchArc_8_2f-SketchLine_27r-SketchArc_7_2f-SketchLine_22r")], model.selection(), 2, 17)
 269 Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/To_Face"))
 270 SketchLine_28 = Sketch_5.addLine(5.000000000000001, -46, 37.00000000000001, -46)
 271 SketchLine_28.setName("SketchLine_29")
 272 SketchLine_28.result().setName("SketchLine_29")
 273 SketchLine_29 = Sketch_5.addLine(5, -30, 37.00000000000001, -30)
 274 SketchLine_29.setName("SketchLine_30")
 275 SketchLine_29.result().setName("SketchLine_30")
 276 SketchLine_30 = Sketch_5.addLine(2, -43, 2, -33)
 277 SketchLine_30.setName("SketchLine_31")
 278 SketchLine_30.result().setName("SketchLine_31")
 279 SketchLine_31 = Sketch_5.addLine(40.00000000000001, -33, 40.00000000000001, -43)
 280 SketchLine_31.setName("SketchLine_32")
 281 SketchLine_31.result().setName("SketchLine_32")
 282 SketchConstraintHorizontal_5 = Sketch_5.setHorizontal(SketchLine_29.result())
 283 SketchConstraintHorizontal_6 = Sketch_5.setHorizontal(SketchLine_28.result())
 284 SketchConstraintVertical_2 = Sketch_5.setVertical(SketchLine_30.result())
 285 SketchConstraintVertical_3 = Sketch_5.setVertical(SketchLine_31.result())
 286 SketchConstraintEqual_8 = Sketch_5.setEqual(SketchLine_29.result(), SketchLine_28.result())
 287 SketchConstraintEqual_9 = Sketch_5.setEqual(SketchLine_31.result(), SketchLine_30.result())
 288 SketchLine_32 = Sketch_5.addLine(model.selection("EDGE", "[Extrusion_2_1/Generated_Face&Sketch_4/SketchLine_26][Extrusion_2_1/To_Face]"))
 289 SketchLine_32.setName("SketchLine_33")
 290 SketchLine_32.result().setName("SketchLine_33")
 291 SketchConstraintDistance_7 = Sketch_5.setDistance(SketchLine_30.endPoint(), SketchLine_32.result(), 2)
 292 SketchLine_33 = Sketch_5.addLine(model.selection("EDGE", "[Extrusion_2_1/Generated_Face&Sketch_4/SketchLine_27][Extrusion_2_1/To_Face]"))
 293 SketchLine_33.setName("SketchLine_34")
 294 SketchLine_33.result().setName("SketchLine_34")
 295 SketchConstraintDistance_8 = Sketch_5.setDistance(SketchLine_31.startPoint(), SketchLine_33.result(), 2)
 296 SketchLine_34 = Sketch_5.addLine(model.selection("EDGE", "[Extrusion_2_1/Generated_Face&Sketch_4/SketchLine_22][Extrusion_2_1/To_Face]"))
 297 SketchLine_34.setName("SketchLine_35")
 298 SketchLine_34.result().setName("SketchLine_35")
 299 SketchConstraintDistance_9 = Sketch_5.setDistance(SketchLine_29.startPoint(), SketchLine_34.result(), 2)
 300 SketchLine_35 = Sketch_5.addLine(model.selection("EDGE", "[Extrusion_2_1/Generated_Face&Sketch_4/SketchLine_25][Extrusion_2_1/To_Face]"))
 301 SketchLine_35.setName("SketchLine_36")
 302 SketchLine_35.result().setName("SketchLine_36")
 303 SketchConstraintDistance_10 = Sketch_5.setDistance(SketchLine_28.startPoint(), SketchLine_35.result(), 2)
 304 SketchArc_9 = Sketch_5.addArc(5, -33, 2, -33, 5, -30, True)
 305 SketchConstraintCoincidence_52 = Sketch_5.setCoincident(SketchLine_30.endPoint(), SketchArc_9.startPoint())
 306 SketchConstraintCoincidence_52.setName("SketchConstraintCoincidence_53")
 307 SketchConstraintTangent_16 = Sketch_5.setTangent(SketchLine_30.result(), SketchArc_9.results()[1])
 308 SketchArc_10 = Sketch_5.addArc(5, -43, 2, -43, 5.000000000000001, -46, False)
 309 SketchConstraintCoincidence_53 = Sketch_5.setCoincident(SketchLine_30.startPoint(), SketchArc_10.startPoint())
 310 SketchConstraintCoincidence_53.setName("SketchConstraintCoincidence_54")
 311 SketchConstraintTangent_17 = Sketch_5.setTangent(SketchLine_30.result(), SketchArc_10.results()[1])
 312 SketchArc_11 = Sketch_5.addArc(37.00000000000001, -33, 37.00000000000001, -30, 40.00000000000001, -33, True)
 313 SketchConstraintCoincidence_54 = Sketch_5.setCoincident(SketchLine_29.endPoint(), SketchArc_11.startPoint())
 314 SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_55")
 315 SketchConstraintTangent_18 = Sketch_5.setTangent(SketchLine_29.result(), SketchArc_11.results()[1])
 316 SketchArc_12 = Sketch_5.addArc(37.00000000000001, -43, 37.00000000000001, -46, 40.00000000000001, -43, False)
 317 SketchConstraintCoincidence_55 = Sketch_5.setCoincident(SketchLine_28.endPoint(), SketchArc_12.startPoint())
 318 SketchConstraintCoincidence_55.setName("SketchConstraintCoincidence_56")
 319 SketchConstraintTangent_19 = Sketch_5.setTangent(SketchLine_28.result(), SketchArc_12.results()[1])
 320 SketchConstraintCoincidence_56 = Sketch_5.setCoincident(SketchArc_9.endPoint(), SketchLine_29.startPoint())
 321 SketchConstraintCoincidence_56.setName("SketchConstraintCoincidence_57")
 322 SketchConstraintCoincidence_57 = Sketch_5.setCoincident(SketchArc_11.endPoint(), SketchLine_31.startPoint())
 323 SketchConstraintCoincidence_57.setName("SketchConstraintCoincidence_58")
 324 SketchConstraintCoincidence_58 = Sketch_5.setCoincident(SketchLine_31.endPoint(), SketchArc_12.endPoint())
 325 SketchConstraintCoincidence_58.setName("SketchConstraintCoincidence_59")
 326 SketchConstraintCoincidence_59 = Sketch_5.setCoincident(SketchArc_10.endPoint(), SketchLine_28.startPoint())
 327 SketchConstraintCoincidence_59.setName("SketchConstraintCoincidence_60")
 328 SketchConstraintEqual_10 = Sketch_5.setEqual(SketchArc_11.results()[1], SketchArc_9.results()[1])
 329 SketchConstraintEqual_11 = Sketch_5.setEqual(SketchArc_10.results()[1], SketchArc_12.results()[1])
 330 SketchConstraintEqual_12 = Sketch_5.setEqual(SketchArc_12.results()[1], SketchArc_11.results()[1])
 331 SketchConstraintTangent_20 = Sketch_5.setTangent(SketchArc_9.results()[1], SketchLine_29.result())
 332 SketchConstraintTangent_21 = Sketch_5.setTangent(SketchArc_12.results()[1], SketchLine_31.result())
 333 SketchConstraintRadius_6 = Sketch_5.setRadius(SketchArc_9.results()[1], 3)
 334 SketchLine_36 = Sketch_5.addLine(2, -38, 39.99999999999998, -38)
 335 SketchLine_36.setName("SketchLine_37")
 336 SketchLine_36.result().setName("SketchLine_37")
 337 SketchLine_36.setAuxiliary(True)
 338 SketchConstraintCoincidence_60 = Sketch_5.setCoincident(SketchLine_36.startPoint(), SketchLine_30.result())
 339 SketchConstraintCoincidence_60.setName("SketchConstraintCoincidence_61")
 340 SketchConstraintCoincidence_61 = Sketch_5.setCoincident(SketchLine_36.endPoint(), SketchLine_31.result())
 341 SketchConstraintCoincidence_61.setName("SketchConstraintCoincidence_62")
 342 SketchConstraintMiddle_13 = Sketch_5.setMiddlePoint(SketchLine_31.result(), SketchLine_36.endPoint())
 343 SketchConstraintMiddle_14 = Sketch_5.setMiddlePoint(SketchLine_36.startPoint(), SketchLine_30.result())
 344 SketchCircle_8 = Sketch_5.addCircle(13.00000000000001, -38, 2.5)
 345 SketchConstraintCoincidence_62 = Sketch_5.setCoincident(SketchLine_36.result(), SketchCircle_8.center())
 346 SketchConstraintCoincidence_62.setName("SketchConstraintCoincidence_63")
 347 SketchCircle_9 = Sketch_5.addCircle(29, -38, 2.5)
 348 SketchConstraintCoincidence_63 = Sketch_5.setCoincident(SketchLine_36.result(), SketchCircle_9.center())
 349 SketchConstraintCoincidence_63.setName("SketchConstraintCoincidence_64")
 350 SketchConstraintEqual_13 = Sketch_5.setEqual(SketchCircle_9.results()[1], SketchCircle_8.results()[1])
 351 SketchConstraintRadius_7 = Sketch_5.setRadius(SketchCircle_9.results()[1], 2.5)
 352 SketchConstraintDistance_11 = Sketch_5.setDistance(SketchCircle_8.center(), SketchCircle_9.center(), 16)
 353 SketchLine_37 = Sketch_5.addLine(21, -28, 21, -48)
 354 SketchLine_37.setName("SketchLine_38")
 355 SketchLine_37.result().setName("SketchLine_38")
 356 SketchLine_37.setAuxiliary(True)
 357 SketchConstraintCoincidence_64 = Sketch_5.setCoincident(SketchLine_37.startPoint(), SketchLine_34.result())
 358 SketchConstraintCoincidence_64.setName("SketchConstraintCoincidence_65")
 359 SketchConstraintCoincidence_65 = Sketch_5.setCoincident(SketchLine_37.endPoint(), SketchLine_35.result())
 360 SketchConstraintCoincidence_65.setName("SketchConstraintCoincidence_66")
 361 SketchConstraintMiddle_15 = Sketch_5.setMiddlePoint(SketchLine_37.startPoint(), SketchLine_34.result())
 362 SketchConstraintMiddle_16 = Sketch_5.setMiddlePoint(SketchLine_37.endPoint(), SketchLine_35.result())
 363 SketchConstraintDistance_12 = Sketch_5.setDistance(SketchCircle_8.center(), SketchLine_37.result(), 8)
 364 model.do()
 365 ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_5/Face-SketchLine_29r-SketchArc_12_2f-SketchLine_32r-SketchArc_11_2f-SketchLine_30r-SketchArc_9_2f-SketchLine_31r-SketchArc_10_2f-SketchCircle_9_2r-SketchCircle_8_2r_wire")], model.selection(), 0, 15, [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "ExtrusionCut_3_1")])
 366 ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchCircle_8_2f"), model.selection("FACE", "Sketch_5/Face-SketchCircle_9_2f")], model.selection(), 0, 20, [model.selection("SOLID", "ExtrusionCut_4_1"), model.selection("SOLID", "ExtrusionCut_4_2")])
 367 Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/YOZ"))
 368 SketchLine_38 = Sketch_6.addLine(-59, 44, -59, 2)
 369 SketchLine_38.setName("SketchLine_39")
 370 SketchLine_38.result().setName("SketchLine_39")
 371 SketchLine_39 = Sketch_6.addLine(-59, 2, -17, 2)
 372 SketchLine_39.setName("SketchLine_40")
 373 SketchLine_39.result().setName("SketchLine_40")
 374 SketchConstraintCoincidence_66 = Sketch_6.setCoincident(SketchLine_38.endPoint(), SketchLine_39.startPoint())
 375 SketchConstraintCoincidence_66.setName("SketchConstraintCoincidence_67")
 376 SketchLine_40 = Sketch_6.addLine(-17, 2, -16.99997429885428, 44)
 377 SketchLine_40.setName("SketchLine_41")
 378 SketchLine_40.result().setName("SketchLine_41")
 379 SketchConstraintCoincidence_67 = Sketch_6.setCoincident(SketchLine_39.endPoint(), SketchLine_40.startPoint())
 380 SketchConstraintCoincidence_67.setName("SketchConstraintCoincidence_68")
 381 SketchLine_41 = Sketch_6.addLine(-16.99997429885428, 44, -27.99998714942714, 44)
 382 SketchLine_41.setName("SketchLine_42")
 383 SketchLine_41.result().setName("SketchLine_42")
 384 SketchConstraintCoincidence_68 = Sketch_6.setCoincident(SketchLine_40.endPoint(), SketchLine_41.startPoint())
 385 SketchConstraintCoincidence_68.setName("SketchConstraintCoincidence_69")
 386 SketchLine_42 = Sketch_6.addLine(-27.99998714942714, 44, -27.99998714942714, 29)
 387 SketchLine_42.setName("SketchLine_43")
 388 SketchLine_42.result().setName("SketchLine_43")
 389 SketchConstraintCoincidence_69 = Sketch_6.setCoincident(SketchLine_41.endPoint(), SketchLine_42.startPoint())
 390 SketchConstraintCoincidence_69.setName("SketchConstraintCoincidence_70")
 391 SketchLine_43 = Sketch_6.addLine(-27.99998714942714, 29, -47.99998714942714, 29)
 392 SketchLine_43.setName("SketchLine_44")
 393 SketchLine_43.result().setName("SketchLine_44")
 394 SketchConstraintCoincidence_70 = Sketch_6.setCoincident(SketchLine_42.endPoint(), SketchLine_43.startPoint())
 395 SketchConstraintCoincidence_70.setName("SketchConstraintCoincidence_71")
 396 SketchLine_44 = Sketch_6.addLine(-47.99998714942714, 29, -47.99998714942714, 44)
 397 SketchLine_44.setName("SketchLine_45")
 398 SketchLine_44.result().setName("SketchLine_45")
 399 SketchConstraintCoincidence_71 = Sketch_6.setCoincident(SketchLine_43.endPoint(), SketchLine_44.startPoint())
 400 SketchConstraintCoincidence_71.setName("SketchConstraintCoincidence_72")
 401 SketchLine_45 = Sketch_6.addLine(-47.99998714942714, 44, -59, 44)
 402 SketchLine_45.setName("SketchLine_46")
 403 SketchLine_45.result().setName("SketchLine_46")
 404 SketchConstraintCoincidence_72 = Sketch_6.setCoincident(SketchLine_44.endPoint(), SketchLine_45.startPoint())
 405 SketchConstraintCoincidence_72.setName("SketchConstraintCoincidence_73")
 406 SketchConstraintCoincidence_73 = Sketch_6.setCoincident(SketchLine_38.startPoint(), SketchLine_45.endPoint())
 407 SketchConstraintCoincidence_73.setName("SketchConstraintCoincidence_74")
 408 SketchConstraintEqual_14 = Sketch_6.setEqual(SketchLine_38.result(), SketchLine_40.result())
 409 SketchConstraintEqual_15 = Sketch_6.setEqual(SketchLine_41.result(), SketchLine_45.result())
 410 SketchConstraintEqual_16 = Sketch_6.setEqual(SketchLine_42.result(), SketchLine_44.result())
 411 SketchConstraintHorizontal_7 = Sketch_6.setHorizontal(SketchLine_45.result())
 412 SketchConstraintHorizontal_8 = Sketch_6.setHorizontal(SketchLine_43.result())
 413 SketchConstraintHorizontal_9 = Sketch_6.setHorizontal(SketchLine_39.result())
 414 SketchConstraintHorizontal_10 = Sketch_6.setHorizontal(SketchLine_41.result())
 415 SketchConstraintVertical_4 = Sketch_6.setVertical(SketchLine_38.result())
 416 SketchConstraintVertical_5 = Sketch_6.setVertical(SketchLine_44.result())
 417 SketchConstraintVertical_6 = Sketch_6.setVertical(SketchLine_42.result())
 418 SketchConstraintLength_3 = Sketch_6.setLength(SketchLine_38.result(), 42)
 419 SketchConstraintLength_4 = Sketch_6.setLength(SketchLine_43.result(), 20)
 420 SketchConstraintLength_5 = Sketch_6.setLength(SketchLine_44.result(), 15)
 421 SketchConstraintLength_6 = Sketch_6.setLength(SketchLine_39.result(), 42)
 422 SketchProjection_3 = Sketch_6.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_4_2]"), False)
 423 SketchLine_46 = SketchProjection_3.createdFeature()
 424 SketchLine_46.setName("SketchLine_47")
 425 SketchLine_46.result().setName("SketchLine_47")
 426 SketchProjection_4 = Sketch_6.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][(Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_3_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3)(ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_1_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_4_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6)(ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_2_2)(ExtrusionCut_1_1/Generated_Face&Sketch_2/SketchCircle_1_2)_ExtrusionCut_5_2]"), False)
 427 SketchLine_47 = SketchProjection_4.createdFeature()
 428 SketchLine_47.setName("SketchLine_48")
 429 SketchLine_47.result().setName("SketchLine_48")
 430 SketchProjection_5 = Sketch_6.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_4_2]"), False)
 431 SketchLine_48 = SketchProjection_5.createdFeature()
 432 SketchLine_48.setName("SketchLine_49")
 433 SketchLine_48.result().setName("SketchLine_49")
 434 SketchConstraintDistance_13 = Sketch_6.setDistance(SketchLine_38.endPoint(), SketchLine_46.result(), 2)
 435 SketchConstraintDistance_14 = Sketch_6.setDistance(SketchLine_38.startPoint(), SketchLine_47.result(), 17)
 436 model.do()
 437 ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6"), -2, model.selection(), -2, [model.selection("SOLID", "ExtrusionCut_5_2")])
 438 Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1"))
 439 SketchLine_49 = Sketch_7.addLine(0, -22.99999999998656, -76, -22.99999999998655)
 440 SketchLine_49.setName("SketchLine_50")
 441 SketchLine_49.result().setName("SketchLine_50")
 442 SketchLine_49.setAuxiliary(True)
 443 SketchLine_50 = Sketch_7.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][(Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_3_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3)(ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_1_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_4_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6)(ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_2_2)(ExtrusionCut_3_1/Generated_Face&Sketch_3/SketchCircle_5_2)_ExtrusionCut_6_1]"))
 444 SketchLine_50.setName("SketchLine_51")
 445 SketchLine_50.result().setName("SketchLine_51")
 446 SketchConstraintCoincidence_74 = Sketch_7.setCoincident(SketchLine_49.startPoint(), SketchLine_50.result())
 447 SketchConstraintCoincidence_74.setName("SketchConstraintCoincidence_75")
 448 SketchPoint_3 = Sketch_7.addPoint(model.selection("VERTEX", "Sketch_2/SketchLine_13_StartVertex"))
 449 SketchConstraintCoincidence_75 = Sketch_7.setCoincident(SketchLine_49.endPoint(), SketchPoint_3.result())
 450 SketchConstraintCoincidence_75.setName("SketchConstraintCoincidence_76")
 451 SketchConstraintMiddle_17 = Sketch_7.setMiddlePoint(SketchLine_49.startPoint(), SketchLine_50.result())
 452 SketchLine_51 = Sketch_7.addLine(-38, -40.99999999998656, -38, -4.99999999998656)
 453 SketchLine_51.setName("SketchLine_52")
 454 SketchLine_51.result().setName("SketchLine_52")
 455 SketchLine_51.setAuxiliary(True)
 456 SketchLine_52 = Sketch_7.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_1_2]"))
 457 SketchLine_52.setName("SketchLine_53")
 458 SketchLine_52.result().setName("SketchLine_53")
 459 SketchConstraintCoincidence_76 = Sketch_7.setCoincident(SketchLine_51.startPoint(), SketchLine_52.result())
 460 SketchConstraintCoincidence_76.setName("SketchConstraintCoincidence_77")
 461 SketchLine_53 = Sketch_7.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_3_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1]"))
 462 SketchLine_53.setName("SketchLine_54")
 463 SketchLine_53.result().setName("SketchLine_54")
 464 SketchConstraintCoincidence_77 = Sketch_7.setCoincident(SketchLine_51.endPoint(), SketchLine_53.result())
 465 SketchConstraintCoincidence_77.setName("SketchConstraintCoincidence_78")
 466 SketchConstraintMiddle_18 = Sketch_7.setMiddlePoint(SketchLine_51.startPoint(), SketchLine_52.result())
 467 SketchConstraintMiddle_19 = Sketch_7.setMiddlePoint(SketchLine_51.endPoint(), SketchLine_53.result())
 468 SketchPoint_4 = Sketch_7.addPoint(-37.99999999999999, -22.99999999998656)
 469 SketchConstraintCoincidence_78 = Sketch_7.setCoincident(SketchPoint_4.coordinates(), SketchLine_51.result())
 470 SketchConstraintCoincidence_78.setName("SketchConstraintCoincidence_79")
 471 SketchConstraintMiddle_20 = Sketch_7.setMiddlePoint(SketchPoint_4.coordinates(), SketchLine_51.result())
 472 SketchCircle_10 = Sketch_7.addCircle(-37.99999999999999, -22.99999999998656, 17)
 473 SketchConstraintCoincidence_79 = Sketch_7.setCoincident(SketchPoint_4.coordinates(), SketchCircle_10.center())
 474 SketchConstraintCoincidence_79.setName("SketchConstraintCoincidence_80")
 475 SketchConstraintRadius_8 = Sketch_7.setRadius(SketchCircle_10.results()[1], 17)
 476 model.do()
 477 Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_7/Face-SketchCircle_10_2f_wire")], model.selection(), 16, 0)
 478 Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_3_1/To_Face"))
 479 SketchProjection_6 = Sketch_8.addProjection(model.selection("EDGE", "Sketch_2/SketchLine_9"), False)
 480 SketchLine_54 = SketchProjection_6.createdFeature()
 481 SketchLine_54.setName("SketchLine_55")
 482 SketchLine_54.result().setName("SketchLine_55")
 483 SketchProjection_7 = Sketch_8.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][(Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_3_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3)(ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_1_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_4_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6)(ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_2_2)(ExtrusionCut_3_1/Generated_Face&Sketch_3/SketchCircle_5_2)_ExtrusionCut_6_1]"), False)
 484 SketchLine_55 = SketchProjection_7.createdFeature()
 485 SketchLine_55.setName("SketchLine_56")
 486 SketchLine_55.result().setName("SketchLine_56")
 487 SketchLine_56 = Sketch_8.addLine(0, -22.99999999998656, -76, -22.99999999999327)
 488 SketchLine_56.setName("SketchLine_57")
 489 SketchLine_56.result().setName("SketchLine_57")
 490 SketchLine_56.setAuxiliary(True)
 491 SketchConstraintCoincidence_80 = Sketch_8.setCoincident(SketchLine_56.startPoint(), SketchLine_55.result())
 492 SketchConstraintCoincidence_80.setName("SketchConstraintCoincidence_81")
 493 SketchConstraintCoincidence_81 = Sketch_8.setCoincident(SketchLine_56.endPoint(), SketchLine_54.result())
 494 SketchConstraintCoincidence_81.setName("SketchConstraintCoincidence_82")
 495 SketchConstraintMiddle_21 = Sketch_8.setMiddlePoint(SketchLine_56.endPoint(), SketchLine_54.result())
 496 SketchConstraintMiddle_22 = Sketch_8.setMiddlePoint(SketchLine_55.result(), SketchLine_56.startPoint())
 497 SketchLine_57 = Sketch_8.addLine(-37.99999999999842, -40.99999999998655, -38.000000000002, 0)
 498 SketchLine_57.setName("SketchLine_58")
 499 SketchLine_57.result().setName("SketchLine_58")
 500 SketchLine_57.setAuxiliary(True)
 501 SketchPoint_5 = Sketch_8.addPoint(-38, -22.99999999998992)
 502 SketchConstraintCoincidence_82 = Sketch_8.setCoincident(SketchPoint_5.coordinates(), SketchLine_56.result())
 503 SketchConstraintCoincidence_82.setName("SketchConstraintCoincidence_83")
 504 SketchConstraintMiddle_23 = Sketch_8.setMiddlePoint(SketchLine_56.result(), SketchPoint_5.coordinates())
 505 SketchConstraintCoincidence_83 = Sketch_8.setCoincident(SketchLine_57.result(), SketchPoint_5.coordinates())
 506 SketchConstraintCoincidence_83.setName("SketchConstraintCoincidence_84")
 507 SketchConstraintPerpendicular_1 = Sketch_8.setPerpendicular(SketchLine_57.result(), SketchLine_56.result())
 508 SketchProjection_8 = Sketch_8.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_1_2]"), False)
 509 SketchLine_58 = SketchProjection_8.createdFeature()
 510 SketchLine_58.setName("SketchLine_59")
 511 SketchLine_58.result().setName("SketchLine_59")
 512 SketchProjection_9 = Sketch_8.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_3_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1]"), False)
 513 SketchLine_59 = SketchProjection_9.createdFeature()
 514 SketchLine_59.setName("SketchLine_60")
 515 SketchLine_59.result().setName("SketchLine_60")
 516 SketchConstraintCoincidence_84 = Sketch_8.setCoincident(SketchLine_57.startPoint(), SketchLine_58.result())
 517 SketchConstraintCoincidence_84.setName("SketchConstraintCoincidence_85")
 518 SketchConstraintCoincidence_85 = Sketch_8.setCoincident(SketchLine_57.endPoint(), SketchLine_59.result())
 519 SketchConstraintCoincidence_85.setName("SketchConstraintCoincidence_86")
 520 SketchCircle_11 = Sketch_8.addCircle(-30, -22.99999999998921, 2.5)
 521 SketchConstraintCoincidence_86 = Sketch_8.setCoincident(SketchLine_56.result(), SketchCircle_11.center())
 522 SketchConstraintCoincidence_86.setName("SketchConstraintCoincidence_87")
 523 SketchCircle_12 = Sketch_8.addCircle(-46.00000000004985, -22.99999999999062, 2.5)
 524 SketchConstraintCoincidence_87 = Sketch_8.setCoincident(SketchLine_56.result(), SketchCircle_12.center())
 525 SketchConstraintCoincidence_87.setName("SketchConstraintCoincidence_88")
 526 SketchConstraintEqual_17 = Sketch_8.setEqual(SketchCircle_12.results()[1], SketchCircle_11.results()[1])
 527 SketchConstraintRadius_9 = Sketch_8.setRadius(SketchCircle_11.results()[1], 2.5)
 528 SketchConstraintDistance_15 = Sketch_8.setDistance(SketchCircle_11.center(), SketchLine_57.result(), 8)
 529 SketchConstraintDistance_16 = Sketch_8.setDistance(SketchCircle_11.center(), SketchCircle_12.center(), 16)
 530 model.do()
 531 Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchCircle_11_2f"), model.selection("FACE", "Sketch_8/Face-SketchCircle_12_2f")], model.selection(), 17, 0)
 532 Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "(Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_3_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3)(ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_1_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_4_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6)(ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_2_2)(ExtrusionCut_3_1/Generated_Face&Sketch_3/SketchCircle_5_2)_ExtrusionCut_6_1"), 38, True)
 533 Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
 534 SketchLine_60 = Sketch_9.addLine(-14, -36.99999999998992, 0, -36.99999999998992)
 535 SketchLine_60.setName("SketchLine_61")
 536 SketchLine_60.result().setName("SketchLine_61")
 537 SketchLine_61 = Sketch_9.addLine(0, -36.99999999998992, 0, -22.99999999998992)
 538 SketchLine_61.setName("SketchLine_62")
 539 SketchLine_61.result().setName("SketchLine_62")
 540 SketchLine_62 = Sketch_9.addLine(0, -22.99999999998992, -14, -22.99999999998992)
 541 SketchLine_62.setName("SketchLine_63")
 542 SketchLine_62.result().setName("SketchLine_63")
 543 SketchLine_63 = Sketch_9.addLine(-14, -22.99999999998992, -14, -36.99999999998992)
 544 SketchLine_63.setName("SketchLine_64")
 545 SketchLine_63.result().setName("SketchLine_64")
 546 SketchConstraintCoincidence_88 = Sketch_9.setCoincident(SketchLine_63.endPoint(), SketchLine_60.startPoint())
 547 SketchConstraintCoincidence_88.setName("SketchConstraintCoincidence_89")
 548 SketchConstraintCoincidence_89 = Sketch_9.setCoincident(SketchLine_60.endPoint(), SketchLine_61.startPoint())
 549 SketchConstraintCoincidence_89.setName("SketchConstraintCoincidence_90")
 550 SketchConstraintCoincidence_90 = Sketch_9.setCoincident(SketchLine_61.endPoint(), SketchLine_62.startPoint())
 551 SketchConstraintCoincidence_90.setName("SketchConstraintCoincidence_91")
 552 SketchConstraintCoincidence_91 = Sketch_9.setCoincident(SketchLine_62.endPoint(), SketchLine_63.startPoint())
 553 SketchConstraintCoincidence_91.setName("SketchConstraintCoincidence_92")
 554 SketchConstraintHorizontal_11 = Sketch_9.setHorizontal(SketchLine_60.result())
 555 SketchConstraintVertical_7 = Sketch_9.setVertical(SketchLine_61.result())
 556 SketchConstraintHorizontal_12 = Sketch_9.setHorizontal(SketchLine_62.result())
 557 SketchConstraintVertical_8 = Sketch_9.setVertical(SketchLine_63.result())
 558 SketchConstraintLength_7 = Sketch_9.setLength(SketchLine_61.result(), 14)
 559 SketchConstraintEqual_18 = Sketch_9.setEqual(SketchLine_61.result(), SketchLine_60.result())
 560 SketchLine_64 = Sketch_9.addLine(-5.662490896925754, -22.99999999998992, -60.5217691188193, -22.99999999998992)
 561 SketchLine_64.setName("SketchLine_65")
 562 SketchLine_64.result().setName("SketchLine_65")
 563 SketchLine_64.setAuxiliary(True)
 564 SketchPoint_6 = Sketch_9.addPoint(model.selection("VERTEX", "Sketch_8/SketchPoint_5"))
 565 SketchConstraintCoincidence_92 = Sketch_9.setCoincident(SketchLine_64.result(), SketchPoint_6.coordinates())
 566 SketchConstraintCoincidence_92.setName("SketchConstraintCoincidence_93")
 567 SketchConstraintHorizontal_13 = Sketch_9.setHorizontal(SketchLine_64.result())
 568 SketchConstraintCoincidence_93 = Sketch_9.setCoincident(SketchLine_62.startPoint(), SketchLine_64.result())
 569 SketchConstraintCoincidence_93.setName("SketchConstraintCoincidence_94")
 570 SketchLine_65 = Sketch_9.addLine(model.selection("EDGE", "Sketch_7/SketchLine_52"))
 571 SketchLine_65.setName("SketchLine_66")
 572 SketchLine_65.result().setName("SketchLine_66")
 573 SketchConstraintCoincidence_94 = Sketch_9.setCoincident(SketchLine_60.endPoint(), SketchLine_65.result())
 574 SketchConstraintCoincidence_94.setName("SketchConstraintCoincidence_95")
 575 model.do()
 576 RevolutionCut_1 = model.addRevolutionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_9")], model.selection("EDGE", "Sketch_9/SketchLine_65"), 360, 0, [model.selection("SOLID", "Extrusion_3_1")])
 577 model.end()
 578
 579 from GeomAPI import  GeomAPI_Shape
 580
 581 model.testNbResults(Part_1, 1)
 582 model.testNbSubShapes(Part_1, GeomAPI_Shape.SOLID, [5])