test.API/SHAPER/Transformations/TestTranslation_2.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 """
  22 Test case for Translation feature.
  23 Written on High API.
  24 """
  25 from salome.shaper import model
  26
  27 model.begin()
  28 partSet = model.moduleDocument()
  29 Part_1 = model.addPart(partSet)
  30 Part_1_doc = Part_1.document()
  31
  32 # Boxes
  33 Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
  34 Box_2 = model.addBox(Part_1_doc, 10, 10, 10)
  35 Box_3 = model.addBox(Part_1_doc, 10, 10, 10)
  36 Box_4 = model.addBox(Part_1_doc, 10, 10, 10)
  37 Box_5 = model.addBox(Part_1_doc, 10, 10, 10)
  38 Box_6 = model.addBox(Part_1_doc, 10, 10, 10)
  39 Box_7 = model.addBox(Part_1_doc, 10, 10, 10)
  40 Box_8 = model.addBox(Part_1_doc, 10, 10, 10)
  41 Box_9 = model.addBox(Part_1_doc, 10, 10, 10)
  42 Box_10 = model.addBox(Part_1_doc, 10, 10, 10)
  43 Box_11 = model.addBox(Part_1_doc, 10, 10, 10)
  44 Box_12 = model.addBox(Part_1_doc, 10, 10, 10)
  45 Box_13 = model.addBox(Part_1_doc, 10, 10, 10)
  46 Box_14 = model.addBox(Part_1_doc, 10, 10, 10)
  47 Box_15 = model.addBox(Part_1_doc, 10, 10, 10)
  48 Box_16 = model.addBox(Part_1_doc, 10, 10, 10)
  49 Box_17 = model.addBox(Part_1_doc, 10, 10, 10)
  50 Box_18 = model.addBox(Part_1_doc, 10, 10, 10)
  51 Box_19 = model.addBox(Part_1_doc, 10, 10, 10)
  52 Box_20 = model.addBox(Part_1_doc, 10, 10, 10)
  53 Box_21 = model.addBox(Part_1_doc, 10, 10, 10)
  54 Box_22 = model.addBox(Part_1_doc, 10, 10, 10)
  55 Box_23 = model.addBox(Part_1_doc, 10, 10, 10)
  56 Box_24 = model.addBox(Part_1_doc, 10, 10, 10)
  57 Box_25 = model.addBox(Part_1_doc, 10, 10, 10)
  58 Box_26 = model.addBox(Part_1_doc, 10, 10, 10)
  59 Box_27 = model.addBox(Part_1_doc, 10, 10, 10)
  60 Box_28 = model.addBox(Part_1_doc, 10, 10, 10)
  61 Box_29 = model.addBox(Part_1_doc, 10, 10, 10)
  62 Box_30 = model.addBox(Part_1_doc, 10, 10, 10)
  63 Box_31 = model.addBox(Part_1_doc, 10, 10, 10)
  64 Box_32 = model.addBox(Part_1_doc, 10, 10, 10)
  65 Box_33 = model.addBox(Part_1_doc, 10, 10, 10)
  66 Box_34 = model.addBox(Part_1_doc, 10, 10, 10)
  67 Box_35 = model.addBox(Part_1_doc, 10, 10, 10)
  68 Box_36 = model.addBox(Part_1_doc, 10, 10, 10)
  69
  70 ####################
  71 # Sketches
  72 # Sketch contenant un triangle
  73 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  74 SketchLine_1 = Sketch_1.addLine(105.8795836373178, 106.9780351893485, -55.30451701345322, -118.6797057217308)
  75 SketchLine_2 = Sketch_1.addLine(-55.30451701345322, -118.6797057217308, -134.9484255703047, 86.11891628160174)
  76 SketchLine_3 = Sketch_1.addLine(-134.9484255703047, 86.11891628160174, 105.8795836373178, 106.9780351893485)
  77 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  78 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  79 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_3.endPoint())
  80
  81 model.do()
  82
  83 # Edges
  84 Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_2")])
  85
  86 # Axis
  87 Axis_1 = model.addAxis(Part_1_doc, 10, 10, 10)
  88
  89 # Parameters
  90 model.addParameter(Part_1_doc, "d", "15")
  91
  92 # Translation 27
  93 Translation_27_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_1_1")], model.selection("EDGE", "PartSet/OX"), 5)
  94 Intersection_1 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Box_2_1")], [model.selection("SOLID", "Translation_1_1")])
  95 Translation_27 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Intersection_1_1")], model.selection("EDGE", "PartSet/OX"), 15)
  96
  97 # Translation 28
  98 Translation_28_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_3_1")], model.selection("EDGE", "PartSet/OX"), 5)
  99 Intersection_2 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Box_4_1")], [model.selection("SOLID", "Translation_3_1")])
 100 Translation_28 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Intersection_2_1")], model.selection("EDGE", "PartSet/OX"), 0)
 101
 102 # Translation 29
 103 Translation_29_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_5_1")], model.selection("EDGE", "PartSet/OX"), 5)
 104 Intersection_3 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Box_6_1")], [model.selection("SOLID", "Translation_5_1")])
 105 Translation_29 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Intersection_3_1")], model.selection("EDGE", "PartSet/OX"), -15)
 106
 107 # Translation 30
 108 Translation_30_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_7_1")], model.selection("EDGE", "PartSet/OX"), 5)
 109 Intersection_4 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Box_8_1")], [model.selection("SOLID", "Translation_7_1")])
 110 Translation_30 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Intersection_4_1")], model.selection("EDGE", "InvalidName"), -15)
 111
 112 # Translation 31
 113 Translation_31_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_9_1")], model.selection("EDGE", "PartSet/OX"), 5)
 114 Intersection_5 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Box_10_1")], [model.selection("SOLID", "Translation_9_1")])
 115 Translation_31 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Intersection_5_1")], model.selection("EDGE", "PartSet/OY"), "d")
 116
 117 # Translation 32
 118 Translation_32_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_11_1")], model.selection("EDGE", "PartSet/OX"), 5)
 119 Intersection_6 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Box_12_1")], [model.selection("SOLID", "Translation_11_1")])
 120 Translation_32 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Intersection_6_1")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), 15)
 121
 122 # Translation 33
 123 Translation_33_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_13_1")], model.selection("EDGE", "PartSet/OX"), 5)
 124 Intersection_7 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Box_14_1")], [model.selection("SOLID", "Translation_13_1")])
 125 Translation_33 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Intersection_7_1")], model.selection("EDGE", "Edge_1_1"), 15)
 126
 127 # Translation 34
 128 Translation_34_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_15_1")], model.selection("EDGE", "PartSet/OX"), 5)
 129 Intersection_8 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Box_16_1")], [model.selection("SOLID", "Translation_15_1")])
 130 Translation_34 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Intersection_8_1")], model.selection("EDGE", "Intersection_8_1_6"), 15)
 131
 132 # Translation 35
 133 Translation_35_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_17_1")], model.selection("EDGE", "PartSet/OX"), 5)
 134 Intersection_9 = model.addIntersection(Part_1_doc, [model.selection("SOLID", "Box_18_1")], [model.selection("SOLID", "Translation_17_1")])
 135 Translation_35 = model.addTranslation(Part_1_doc, [model.selection("COMPOUND", "Intersection_9_1")], model.selection("EDGE", "Axis_1"), 15)
 136
 137 #Translation 36
 138 Translation_36_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_19_1")], model.selection("EDGE", "PartSet/OX"), 5)
 139 Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_20_1"), model.selection("SOLID", "Translation_19_1")])
 140 Translation_36 = model.addTranslation(Part_1_doc, [model.selection("COMPSOLID", "Partition_1_1")], model.selection("EDGE", "PartSet/OX"), 15)
 141
 142 ## Translation 37
 143 Translation_37_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_21_1")], model.selection("EDGE", "PartSet/OX"), 5)
 144 Partition_2 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_22_1"), model.selection("SOLID", "Translation_21_1")])
 145 Translation_37 = model.addTranslation(Part_1_doc, [model.selection("COMPSOLID", "Partition_2_1")], model.selection("EDGE", "PartSet/OX"), 0)
 146
 147 ## Translation 38
 148 Translation_38_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_23_1")], model.selection("EDGE", "PartSet/OX"), 5)
 149 Partition_3 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_24_1"), model.selection("SOLID", "Translation_23_1")])
 150 Translation_38 = model.addTranslation(Part_1_doc, [model.selection("COMPSOLID", "Partition_3_1")], model.selection("EDGE", "PartSet/OX"), 0)
 151
 152 ## Translation 39
 153 Translation_39_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_25_1")], model.selection("EDGE", "PartSet/OX"), 5)
 154 Partition_4 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_26_1"), model.selection("SOLID", "Translation_25_1")])
 155 Translation_39 = model.addTranslation(Part_1_doc, [model.selection("COMPSOLID", "Partition_4_1")], model.selection("EDGE", "InvalidName"), 0)
 156
 157 ## Translation 40
 158 Translation_40_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_27_1")], model.selection("EDGE", "PartSet/OX"), 5)
 159 Partition_5 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_28_1"), model.selection("SOLID", "Translation_27_1")])
 160 Translation_40 = model.addTranslation(Part_1_doc, [model.selection("COMPSOLID", "Partition_5_1")], model.selection("EDGE", "PartSet/OX"), "d")
 161
 162 # Translation 41
 163 Translation_41_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_29_1")], model.selection("EDGE", "PartSet/OX"), 5)
 164 Partition_6 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_30_1"), model.selection("SOLID", "Translation_29_1")])
 165 Translation_41 = model.addTranslation(Part_1_doc, [model.selection("COMPSOLID", "Partition_6_1")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"), 15)
 166
 167 # Translateion 42
 168 Translation_42_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_31_1")], model.selection("EDGE", "PartSet/OX"), 5)
 169 Partition_7 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_32_1"), model.selection("SOLID", "Translation_31_1")])
 170 Translation_42 = model.addTranslation(Part_1_doc, [model.selection("COMPSOLID", "Partition_7_1")], model.selection("EDGE", "Edge_1_1"), 15)
 171
 172 # Translation 43
 173 Translation_43_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_33_1")], model.selection("EDGE", "PartSet/OX"), 5)
 174 Partition_8 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_34_1"), model.selection("SOLID", "Translation_33_1")])
 175 Translation_43 = model.addTranslation(Part_1_doc, [model.selection("COMPSOLID", "Partition_8_1")], model.selection("EDGE", "Partition_8_1/Modified_Face_1_1_1&Partition_8_1/Modified_Face_1_9_1"), 15)
 176
 177 # Translation 44
 178 Translation_44_1 = model.addTranslation(Part_1_doc, [model.selection("SOLID", "Box_35_1")], model.selection("EDGE", "PartSet/OX"), 5)
 179 Partition_9 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Box_36_1"), model.selection("SOLID", "Translation_35_1")])
 180 Translation_44 = model.addTranslation(Part_1_doc, [model.selection("COMPSOLID", "Partition_9_1")], model.selection("EDGE", "Axis_1"), 15)
 181 model.do()
 182 model.end()
 183
 184
 185 # Translation 27
 186 model.testNbResults(Translation_27, 1)
 187 model.testNbSubResults(Translation_27, [12])
 188 model.testNbSubShapes(Translation_27, GeomAPI_Shape.SOLID, [0])
 189 model.testNbSubShapes(Translation_27, GeomAPI_Shape.EDGE, [12])
 190 model.testHaveNamingEdges(Translation_27, model, Part_1_doc)
 191
 192 # Translation 28
 193 model.testNbResults(Translation_28, 1)
 194 model.testNbSubResults(Translation_28, [12])
 195 model.testNbSubShapes(Translation_28, GeomAPI_Shape.SOLID, [0])
 196 model.testNbSubShapes(Translation_28, GeomAPI_Shape.EDGE, [12])
 197 model.testHaveNamingEdges(Translation_28, model, Part_1_doc)
 198
 199 # Translation 29
 200 model.testNbResults(Translation_29, 1)
 201 model.testNbSubResults(Translation_29, [12])
 202 model.testNbSubShapes(Translation_29, GeomAPI_Shape.SOLID, [0])
 203 model.testNbSubShapes(Translation_29, GeomAPI_Shape.EDGE, [12])
 204 model.testHaveNamingEdges(Translation_29, model, Part_1_doc)
 205
 206 # Translation 31
 207 model.testNbResults(Translation_31, 1)
 208 model.testNbSubResults(Translation_31, [12])
 209 model.testNbSubShapes(Translation_31, GeomAPI_Shape.SOLID, [0])
 210 model.testNbSubShapes(Translation_31, GeomAPI_Shape.EDGE, [12])
 211 model.testHaveNamingEdges(Translation_31, model, Part_1_doc)
 212
 213 # Translation 32
 214 model.testNbResults(Translation_32, 1)
 215 model.testNbSubResults(Translation_32, [12])
 216 model.testNbSubShapes(Translation_32, GeomAPI_Shape.SOLID, [0])
 217 model.testNbSubShapes(Translation_32, GeomAPI_Shape.EDGE, [12])
 218 model.testHaveNamingEdges(Translation_32, model, Part_1_doc)
 219
 220 # Translation 33
 221 model.testNbResults(Translation_33, 1)
 222 model.testNbSubResults(Translation_33, [12])
 223 model.testNbSubShapes(Translation_33, GeomAPI_Shape.SOLID, [0])
 224 model.testNbSubShapes(Translation_33, GeomAPI_Shape.EDGE, [12])
 225 model.testHaveNamingEdges(Translation_33, model, Part_1_doc)
 226
 227 # Translation 34
 228 model.testNbResults(Translation_34, 1)
 229 model.testNbSubResults(Translation_34, [12])
 230 model.testNbSubShapes(Translation_34, GeomAPI_Shape.SOLID, [0])
 231 model.testNbSubShapes(Translation_34, GeomAPI_Shape.EDGE, [12])
 232 model.testHaveNamingEdges(Translation_34, model, Part_1_doc)
 233
 234 # Translation 35
 235 model.testNbResults(Translation_35, 1)
 236 model.testNbSubResults(Translation_35, [12])
 237 model.testNbSubShapes(Translation_35, GeomAPI_Shape.SOLID, [0])
 238 model.testNbSubShapes(Translation_35, GeomAPI_Shape.EDGE, [12])
 239 model.testHaveNamingEdges(Translation_35, model, Part_1_doc)
 240
 241 # Translation 36
 242 model.testNbResults(Translation_36, 1)
 243 model.testNbSubResults(Translation_36, [3])
 244 model.testNbSubShapes(Translation_36, GeomAPI_Shape.COMPSOLID, [1])
 245 model.testNbSubShapes(Translation_36, GeomAPI_Shape.SOLID, [3])
 246 model.testNbSubShapes(Translation_36, GeomAPI_Shape.FACE, [18])
 247 model.testHaveNamingFaces(Translation_36, model, Part_1_doc)
 248
 249 # Translation 37
 250 model.testNbResults(Translation_37, 1)
 251 model.testNbSubResults(Translation_37, [3])
 252 model.testNbSubShapes(Translation_37, GeomAPI_Shape.COMPSOLID, [1])
 253 model.testNbSubShapes(Translation_37, GeomAPI_Shape.SOLID, [3])
 254 model.testNbSubShapes(Translation_37, GeomAPI_Shape.FACE, [18])
 255 model.testHaveNamingFaces(Translation_37, model, Part_1_doc)
 256
 257 # Translation 38
 258 model.testNbResults(Translation_38, 1)
 259 model.testNbSubResults(Translation_38, [3])
 260 model.testNbSubShapes(Translation_38, GeomAPI_Shape.COMPSOLID, [1])
 261 model.testNbSubShapes(Translation_38, GeomAPI_Shape.SOLID, [3])
 262 model.testNbSubShapes(Translation_38, GeomAPI_Shape.FACE, [18])
 263 model.testHaveNamingFaces(Translation_38, model, Part_1_doc)
 264
 265 # Translation 40
 266 model.testNbResults(Translation_40, 1)
 267 model.testNbSubResults(Translation_40, [3])
 268 model.testNbSubShapes(Translation_40, GeomAPI_Shape.COMPSOLID, [1])
 269 model.testNbSubShapes(Translation_40, GeomAPI_Shape.SOLID, [3])
 270 model.testNbSubShapes(Translation_40, GeomAPI_Shape.FACE, [18])
 271 model.testHaveNamingFaces(Translation_40, model, Part_1_doc)
 272
 273 # Translation 41
 274 model.testNbResults(Translation_41, 1)
 275 model.testNbSubResults(Translation_41, [3])
 276 model.testNbSubShapes(Translation_41, GeomAPI_Shape.COMPSOLID, [1])
 277 model.testNbSubShapes(Translation_41, GeomAPI_Shape.SOLID, [3])
 278 model.testNbSubShapes(Translation_41, GeomAPI_Shape.FACE, [18])
 279 model.testHaveNamingFaces(Translation_41, model, Part_1_doc)
 280
 281 # Translation 42
 282 model.testNbResults(Translation_42, 1)
 283 model.testNbSubResults(Translation_42, [3])
 284 model.testNbSubShapes(Translation_42, GeomAPI_Shape.COMPSOLID, [1])
 285 model.testNbSubShapes(Translation_42, GeomAPI_Shape.SOLID, [3])
 286 model.testNbSubShapes(Translation_42, GeomAPI_Shape.FACE, [18])
 287 model.testHaveNamingFaces(Translation_42, model, Part_1_doc)
 288
 289 # Translation 43
 290 model.testNbResults(Translation_43, 1)
 291 model.testNbSubResults(Translation_43, [3])
 292 model.testNbSubShapes(Translation_43, GeomAPI_Shape.COMPSOLID, [1])
 293 model.testNbSubShapes(Translation_43, GeomAPI_Shape.SOLID, [3])
 294 model.testNbSubShapes(Translation_43, GeomAPI_Shape.FACE, [18])
 295 model.testHaveNamingFaces(Translation_43, model, Part_1_doc)
 296
 297 # Translation 44
 298 model.testNbResults(Translation_44, 1)
 299 model.testNbSubResults(Translation_44, [3])
 300 model.testNbSubShapes(Translation_44, GeomAPI_Shape.COMPSOLID, [1])
 301 model.testNbSubShapes(Translation_44, GeomAPI_Shape.SOLID, [3])
 302 model.testNbSubShapes(Translation_44, GeomAPI_Shape.FACE, [18])
 303 model.testHaveNamingFaces(Translation_44, model, Part_1_doc)
 304
 305 # Translation 30
 306 model.testNbResults(Translation_30, 0)
 307 assert(Translation_30.feature().error() == 'Attribute "axis_object" is not initialized.')
 308
 309 # Translation 39
 310 model.testNbResults(Translation_39, 0)
 311 assert(Translation_39.feature().error() == 'Attribute "axis_object" is not initialized.')