test.API/SHAPER/Transformations/TestSymmetry.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 """
  22 Test case for Symmetry feature.
  23 Written on High API.
  24 """
  25 from salome.shaper import model
  26
  27 model.begin()
  28 partSet = model.moduleDocument()
  29 Part_1 = model.addPart(partSet)
  30 Part_1_doc = Part_1.document()
  31
  32 # Boxes
  33 Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
  34 Box_2 = model.addBox(Part_1_doc, 10, 10, 10)
  35 Box_3 = model.addBox(Part_1_doc, 10, 10, 10)
  36 Box_4 = model.addBox(Part_1_doc, 10, 10, 10)
  37 Box_5 = model.addBox(Part_1_doc, 10, 10, 10)
  38 Box_6 = model.addBox(Part_1_doc, 10, 10, 10)
  39 Box_7 = model.addBox(Part_1_doc, 10, 10, 10)
  40 Box_8 = model.addBox(Part_1_doc, 10, 10, 10)
  41 Box_9 = model.addBox(Part_1_doc, 10, 10, 10)
  42 Box_10 = model.addBox(Part_1_doc, 10, 10, 10)
  43 Box_11 = model.addBox(Part_1_doc, 10, 10, 10)
  44 Box_12 = model.addBox(Part_1_doc, 10, 10, 10)
  45 Box_13 = model.addBox(Part_1_doc, 10, 10, 10)
  46 Box_14 = model.addBox(Part_1_doc, 10, 10, 10)
  47 Box_15 = model.addBox(Part_1_doc, 10, 10, 10)
  48 Box_16 = model.addBox(Part_1_doc, 10, 10, 10)
  49 Box_17 = model.addBox(Part_1_doc, 10, 10, 10)
  50
  51 # Points
  52 Point_1 = model.addPoint(Part_1_doc, -10, -10, -10)
  53
  54 # Axes
  55 Axis_1 = model.addAxis(Part_1_doc, 10, 10, 20)
  56
  57 # Sketches
  58 # Sketch comportant une ligne n'ayant dont les extremites ne coincident pas avec l'origine
  59 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  60 SketchLine_1 = Sketch_1.addLine(-60.61265429508839, -83.21124437581197, 133.0036727560886, 114.0582209216138)
  61
  62 # Sketch comportant une contour ferme de 4 lignes
  63 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  64 SketchLine_2 = Sketch_2.addLine(82.71019756173548, 167.8442841418389, -114.8596207554555, -2.66979472427181)
  65 SketchLine_3 = Sketch_2.addLine(-114.8596207554555, -2.66979472427181, 102.2154980962352, -58.03968011252918)
  66 SketchLine_4 = Sketch_2.addLine(102.2154980962352, -58.03968011252918, 240.6402115668787, 65.28415552495312)
  67 SketchLine_5 = Sketch_2.addLine(240.6402115668787, 65.28415552495312, 82.71019756173548, 167.8442841418389)
  68 SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  69 SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  70 SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  71 SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_2.startPoint(), SketchLine_5.endPoint())
  72
  73 # Sketch comportant un contour ferme de 5 lignes
  74 Sketch_3 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  75 SketchLine_6 = Sketch_3.addLine(26.85462764597397, 67.26291526312015, -53.39765785606262, 39.86755675840885)
  76 SketchLine_7 = Sketch_3.addLine(-53.39765785606262, 39.86755675840885, -33.73745939974039, -8.799491879372397)
  77 SketchLine_8 = Sketch_3.addLine(-33.73745939974039, -8.799491879372397, 33.30059435296487, -32.6495686952387)
  78 SketchLine_9 = Sketch_3.addLine(33.30059435296487, -32.6495686952387, 19.44176593293446, 18.5958666253389)
  79 SketchLine_10 = Sketch_3.addLine(19.44176593293446, 18.5958666253389, 26.85462764597397, 67.26291526312015)
  80 SketchConstraintCoincidence_1 = Sketch_3.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  81 SketchConstraintCoincidence_2 = Sketch_3.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  82 SketchConstraintCoincidence_3 = Sketch_3.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  83 SketchConstraintCoincidence_4 = Sketch_3.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
  84 SketchConstraintCoincidence_5 = Sketch_3.setCoincident(SketchLine_6.startPoint(), SketchLine_10.endPoint())
  85
  86 model.do()
  87
  88 # Vertexes
  89 Vertex_1 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_1e")])
  90
  91 # Edges
  92 Edge_1 = model.addEdge(Part_1_doc, [model.selection("EDGE", "Sketch_1/Edge-SketchLine_1")])
  93
  94 # Wire & Extrusion
  95 Wire_1 = model.addWire(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchLine_6f-SketchLine_7f-SketchLine_8f-SketchLine_9f-SketchLine_10f")])
  96 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], model.selection(), 50, 0)
  97
  98 # Planes
  99 Plane_1 = model.addPlane(Part_1_doc, model.selection("FACE", "Box_14_1/Top"), 10, False)
 100 Plane_2 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/XOZ"), 40, False)
 101
 102 # Faces
 103 Face_1 = model.addFace(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_2f-SketchLine_3f-SketchLine_4f-SketchLine_5f")])
 104
 105
 106 # Symmetries
 107 Symmetry_1 = model.addMirror(Part_1_doc, [model.selection("SOLID", "Box_1_1")], model.selection("VERTEX", "PartSet/Origin"))
 108 Symmetry_2 = model.addMirror(Part_1_doc, [model.selection("SOLID", "Box_2_1")], model.selection("VERTEX", "Point_1"))
 109 Symmetry_3 = model.addMirror(Part_1_doc, [model.selection("SOLID", "Box_3_1")], model.selection("VERTEX", "Box_3_1/Front&Box_3_1/Right&Box_3_1/Top"))
 110 Symmetry_4 = model.addMirror(Part_1_doc, [model.selection("SOLID", "Box_4_1")], model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_1e"))
 111 Symmetry_5 = model.addMirror(Part_1_doc, [model.selection("SOLID", "Box_5_1")], model.selection("VERTEX", "Vertex_1_1"))
 112 Symmetry_6 = model.addMirror(Part_1_doc, [model.selection("SOLID", "Box_6_1")], model.selection("VERTEX", "InvalidName"))
 113
 114 Symmetry_7 = model.addMirror(Part_1_doc, [model.selection("SOLID", "Box_7_1")], model.selection("EDGE", "PartSet/OZ"))
 115 Symmetry_8 = model.addMirror(Part_1_doc, [model.selection("SOLID", "Box_8_1")], model.selection("EDGE", "Axis_1"))
 116 Symmetry_9 = model.addMirror(Part_1_doc, [model.selection("SOLID", "Box_9_1")], model.selection("EDGE", "Box_9_1/Front&Box_9_1/Top"))
 117 Symmetry_10 = model.addMirror(Part_1_doc, [model.selection("SOLID", "Box_10_1")], model.selection("EDGE", "Sketch_1/Edge-SketchLine_1"))
 118 Symmetry_11 = model.addMirror(Part_1_doc, [model.selection("SOLID", "Box_11_1")], model.selection("EDGE", "Edge_1_1"))
 119 Symmetry_12 = model.addMirror(Part_1_doc, [model.selection("SOLID", "Box_12_1")], model.selection("EDGE", "InvalidName"))
 120
 121 Symmetry_13 = model.addMirror(Part_1_doc, [model.selection("SOLID", "Box_13_1")], model.selection("FACE", "PartSet/XOY"))
 122 Symmetry_14 = model.addMirror(Part_1_doc, [model.selection("SOLID", "Box_14_1")], model.selection("FACE", "Plane_1"))
 123 Symmetry_15 = model.addMirror(Part_1_doc, [model.selection("SOLID", "Box_15_1")], model.selection("FACE", "Box_15_1/Front"))
 124 Symmetry_16 = model.addMirror(Part_1_doc, [model.selection("SOLID", "Box_16_1")], model.selection("FACE", "Face_1_1"))
 125 Symmetry_17 = model.addMirror(Part_1_doc, [model.selection("SOLID", "Box_17_1")], model.selection("FACE", "InvalidName"))
 126 Symmetry_18 = model.addMirror(Part_1_doc, [model.selection("SHELL", "Extrusion_1_1")], model.selection("FACE", "Plane_2"))
 127
 128 model.do()
 129 model.end()
 130
 131 # Checks
 132 from GeomAPI import GeomAPI_Shape
 133
 134 model.testNbResults(Symmetry_1, 1)
 135 model.testNbSubResults(Symmetry_1, [2])
 136 model.testNbSubShapes(Symmetry_1, GeomAPI_Shape.SOLID, [2])
 137 model.testNbSubShapes(Symmetry_1, GeomAPI_Shape.FACE, [12])
 138 model.testHaveNamingFaces(Symmetry_1, model, Part_1_doc)
 139
 140 model.testNbResults(Symmetry_2, 1)
 141 model.testNbSubResults(Symmetry_2, [2])
 142 model.testNbSubShapes(Symmetry_2, GeomAPI_Shape.SOLID, [2])
 143 model.testNbSubShapes(Symmetry_2, GeomAPI_Shape.FACE, [12])
 144 model.testHaveNamingFaces(Symmetry_2, model, Part_1_doc)
 145
 146 model.testNbResults(Symmetry_3, 1)
 147 model.testNbSubResults(Symmetry_3, [2])
 148 model.testNbSubShapes(Symmetry_3, GeomAPI_Shape.SOLID, [2])
 149 model.testNbSubShapes(Symmetry_3, GeomAPI_Shape.FACE, [12])
 150 model.testHaveNamingFaces(Symmetry_3, model, Part_1_doc)
 151
 152 model.testNbResults(Symmetry_4, 1)
 153 model.testNbSubResults(Symmetry_4, [2])
 154 model.testNbSubShapes(Symmetry_4, GeomAPI_Shape.SOLID, [2])
 155 model.testNbSubShapes(Symmetry_4, GeomAPI_Shape.FACE, [12])
 156 model.testHaveNamingFaces(Symmetry_4, model, Part_1_doc)
 157
 158 model.testNbResults(Symmetry_5, 1)
 159 model.testNbSubResults(Symmetry_5, [2])
 160 model.testNbSubShapes(Symmetry_5, GeomAPI_Shape.SOLID, [2])
 161 model.testNbSubShapes(Symmetry_5, GeomAPI_Shape.FACE, [12])
 162 model.testHaveNamingFaces(Symmetry_5, model, Part_1_doc)
 163
 164 model.testNbResults(Symmetry_7, 1)
 165 model.testNbSubResults(Symmetry_7, [2])
 166 model.testNbSubShapes(Symmetry_7, GeomAPI_Shape.SOLID, [2])
 167 model.testNbSubShapes(Symmetry_7, GeomAPI_Shape.FACE, [12])
 168 model.testHaveNamingFaces(Symmetry_7, model, Part_1_doc)
 169
 170 model.testNbResults(Symmetry_8, 1)
 171 model.testNbSubResults(Symmetry_8, [2])
 172 model.testNbSubShapes(Symmetry_8, GeomAPI_Shape.SOLID, [2])
 173 model.testNbSubShapes(Symmetry_8, GeomAPI_Shape.FACE, [12])
 174 model.testHaveNamingFaces(Symmetry_8, model, Part_1_doc)
 175
 176 model.testNbResults(Symmetry_9, 1)
 177 model.testNbSubResults(Symmetry_9, [2])
 178 model.testNbSubShapes(Symmetry_9, GeomAPI_Shape.SOLID, [2])
 179 model.testNbSubShapes(Symmetry_9, GeomAPI_Shape.FACE, [12])
 180 model.testHaveNamingFaces(Symmetry_9, model, Part_1_doc)
 181
 182 model.testNbResults(Symmetry_10, 1)
 183 model.testNbSubResults(Symmetry_10, [2])
 184 model.testNbSubShapes(Symmetry_10, GeomAPI_Shape.SOLID, [2])
 185 model.testNbSubShapes(Symmetry_10, GeomAPI_Shape.FACE, [12])
 186 model.testHaveNamingFaces(Symmetry_10, model, Part_1_doc)
 187
 188 model.testNbResults(Symmetry_11, 1)
 189 model.testNbSubResults(Symmetry_11, [2])
 190 model.testNbSubShapes(Symmetry_11, GeomAPI_Shape.SOLID, [2])
 191 model.testNbSubShapes(Symmetry_11, GeomAPI_Shape.FACE, [12])
 192 model.testHaveNamingFaces(Symmetry_11, model, Part_1_doc)
 193
 194 model.testNbResults(Symmetry_13, 1)
 195 model.testNbSubResults(Symmetry_13, [2])
 196 model.testNbSubShapes(Symmetry_13, GeomAPI_Shape.SOLID, [2])
 197 model.testNbSubShapes(Symmetry_13, GeomAPI_Shape.FACE, [12])
 198 model.testHaveNamingFaces(Symmetry_13, model, Part_1_doc)
 199
 200 model.testNbResults(Symmetry_14, 1)
 201 model.testNbSubResults(Symmetry_14, [2])
 202 model.testNbSubShapes(Symmetry_14, GeomAPI_Shape.SOLID, [2])
 203 model.testNbSubShapes(Symmetry_14, GeomAPI_Shape.FACE, [12])
 204 model.testHaveNamingFaces(Symmetry_14, model, Part_1_doc)
 205
 206 model.testNbResults(Symmetry_15, 1)
 207 model.testNbSubResults(Symmetry_15, [2])
 208 model.testNbSubShapes(Symmetry_15, GeomAPI_Shape.SOLID, [2])
 209 model.testNbSubShapes(Symmetry_15, GeomAPI_Shape.FACE, [12])
 210 model.testHaveNamingFaces(Symmetry_15, model, Part_1_doc)
 211
 212 model.testNbResults(Symmetry_16, 1)
 213 model.testNbSubResults(Symmetry_16, [2])
 214 model.testNbSubShapes(Symmetry_16, GeomAPI_Shape.SOLID, [2])
 215 model.testNbSubShapes(Symmetry_16, GeomAPI_Shape.FACE, [12])
 216 model.testHaveNamingFaces(Symmetry_16, model, Part_1_doc)
 217
 218 model.testNbResults(Symmetry_6, 0)
 219 assert(Symmetry_6.feature().error() == 'Attribute "point_object" is not initialized.')
 220
 221 model.testNbResults(Symmetry_12, 0)
 222 assert(Symmetry_12.feature().error() == 'Attribute "axis_object" is not initialized.')
 223
 224 model.testNbResults(Symmetry_17, 0)
 225 assert(Symmetry_17.feature().error() == 'Attribute "plane_object" is not initialized.')
 226
 227 model.testNbResults(Symmetry_18, 1)
 228 model.testNbSubResults(Symmetry_18, [2])
 229 model.testNbSubShapes(Symmetry_18, GeomAPI_Shape.SOLID, [0])
 230 model.testNbSubShapes(Symmetry_18, GeomAPI_Shape.SHELL, [2])
 231 model.testNbSubShapes(Symmetry_18, GeomAPI_Shape.FACE, [10])
 232 model.testHaveNamingFaces(Symmetry_18, model, Part_1_doc)