1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D -->
3 //#include "XGUI_Constants.h"
4 #include "XGUI_Workshop.h"
6 #include "XGUI_ActionsMgr.h"
7 #include "XGUI_ColorDialog.h"
8 #include "XGUI_ContextMenuMgr.h"
9 #include "XGUI_Displayer.h"
10 #include "XGUI_ErrorDialog.h"
11 #include "XGUI_ErrorMgr.h"
12 #include "XGUI_ModuleConnector.h"
13 #include "XGUI_ObjectsBrowser.h"
14 #include "XGUI_OperationMgr.h"
15 #include "XGUI_PropertyPanel.h"
16 #include "XGUI_SalomeConnector.h"
17 #include "XGUI_Selection.h"
18 #include "XGUI_SelectionMgr.h"
19 #include "XGUI_Tools.h"
20 #include "XGUI_ViewerProxy.h"
21 #include "XGUI_WorkshopListener.h"
22 #include <XGUI_CustomPrs.h>
23 #include <XGUI_HistoryMenu.h>
24 #include <XGUI_QtEvents.h>
27 #include <AppElements_Button.h>
28 #include <AppElements_Command.h>
29 #include <AppElements_MainMenu.h>
30 #include <AppElements_MainWindow.h>
31 #include <AppElements_MenuGroupPanel.h>
32 #include <AppElements_Viewer.h>
33 #include <AppElements_Workbench.h>
36 #include <ModelAPI_AttributeDocRef.h>
37 #include <ModelAPI_AttributeIntArray.h>
38 #include <ModelAPI_Data.h>
39 #include <ModelAPI_Events.h>
40 #include <ModelAPI_Feature.h>
41 #include <ModelAPI_Object.h>
42 #include <ModelAPI_ResultBody.h>
43 #include <ModelAPI_ResultConstruction.h>
44 #include <ModelAPI_ResultGroup.h>
45 #include <ModelAPI_ResultParameter.h>
46 #include <ModelAPI_Session.h>
47 #include <ModelAPI_Validator.h>
48 #include <ModelAPI_ResultCompSolid.h>
49 #include <ModelAPI_Tools.h>
51 //#include <PartSetPlugin_Part.h>
53 #include <Events_Loop.h>
54 #include <Events_Error.h>
55 #include <Events_LongOp.h>
57 #include <ModuleBase_FilterFactory.h>
58 #include <ModuleBase_IModule.h>
59 #include <ModuleBase_IViewer.h>
60 #include <ModuleBase_Operation.h>
61 #include <ModuleBase_OperationDescription.h>
62 #include <ModuleBase_PageBase.h>
63 #include <ModuleBase_Preferences.h>
64 #include <ModuleBase_SelectionValidator.h>
65 #include <ModuleBase_Tools.h>
66 #include <ModuleBase_WidgetFactory.h>
67 #include <ModuleBase_OperationFeature.h>
68 #include <ModuleBase_OperationAction.h>
69 #include <ModuleBase_PagedContainer.h>
70 #include <ModuleBase_WidgetValidated.h>
72 #include <Config_Common.h>
73 #include <Config_FeatureMessage.h>
74 #include <Config_ModuleReader.h>
75 #include <Config_PointerMessage.h>
76 #include <Config_PropManager.h>
77 #include <Config_SelectionFilterMessage.h>
79 #include <SUIT_ResourceMgr.h>
81 #include <QApplication>
82 #include <QFileDialog>
83 #include <QMessageBox>
84 #include <QMdiSubWindow>
85 #include <QMainWindow>
86 #include <QPushButton>
87 #include <QDockWidget>
92 #include <QToolButton>
94 #include <QDesktopWidget>
110 QString XGUI_Workshop::MOVE_TO_END_COMMAND = QObject::tr("Move to the end");
112 //#define DEBUG_DELETE
113 //#define DEBUG_FEATURE_NAME
115 XGUI_Workshop::XGUI_Workshop(XGUI_SalomeConnector* theConnector)
117 myCurrentDir(QString()),
119 mySalomeConnector(theConnector),
123 myViewerSelMode(TopAbs_FACE)
126 myMainWindow = new AppElements_MainWindow();
128 SUIT_ResourceMgr* aResMgr = ModuleBase_Preferences::resourceMgr();
129 bool aCloc = aResMgr->booleanValue("language", "locale", true);
131 QLocale::setDefault( QLocale::c() );
133 QLocale::setDefault( QLocale::system() );
136 myDisplayer = new XGUI_Displayer(this);
138 mySelector = new XGUI_SelectionMgr(this);
139 connect(mySelector, SIGNAL(selectionChanged()), this, SLOT(updateCommandStatus()));
141 myOperationMgr = new XGUI_OperationMgr(this, 0);
142 myActionsMgr = new XGUI_ActionsMgr(this);
143 myErrorDlg = new XGUI_ErrorDialog(QApplication::desktop());
144 myContextMenuMgr = new XGUI_ContextMenuMgr(this);
145 connect(myContextMenuMgr, SIGNAL(actionTriggered(const QString&, bool)), this,
146 SLOT(onContextMenuCommand(const QString&, bool)));
148 myViewerProxy = new XGUI_ViewerProxy(this);
149 connect(myViewerProxy, SIGNAL(selectionChanged()),
150 myActionsMgr, SLOT(updateOnViewSelection()));
152 myModuleConnector = new XGUI_ModuleConnector(this);
154 ModuleBase_IWorkshop* aWorkshop = moduleConnector();
155 myOperationMgr->setWorkshop(aWorkshop);
157 myErrorMgr = new XGUI_ErrorMgr(this, aWorkshop);
158 myEventsListener = new XGUI_WorkshopListener(aWorkshop);
160 connect(myOperationMgr, SIGNAL(operationStarted(ModuleBase_Operation*)),
161 SLOT(onOperationStarted(ModuleBase_Operation*)));
162 connect(myOperationMgr, SIGNAL(operationResumed(ModuleBase_Operation*)),
163 SLOT(onOperationResumed(ModuleBase_Operation*)));
164 connect(myOperationMgr, SIGNAL(operationStopped(ModuleBase_Operation*)),
165 SLOT(onOperationStopped(ModuleBase_Operation*)));
166 connect(myOperationMgr, SIGNAL(operationCommitted(ModuleBase_Operation*)),
167 SLOT(onOperationCommitted(ModuleBase_Operation*)));
168 connect(myOperationMgr, SIGNAL(operationAborted(ModuleBase_Operation*)),
169 SLOT(onOperationAborted(ModuleBase_Operation*)));
172 connect(myMainWindow, SIGNAL(exitKeySequence()), SLOT(onExit()));
173 onTrihedronVisibilityChanged(true);
176 connect(this, SIGNAL(errorOccurred(const QString&)), myErrorDlg, SLOT(addError(const QString&)));
177 connect(myEventsListener, SIGNAL(errorOccurred(const QString&)),
178 myErrorDlg, SLOT(addError(const QString&)));
180 //Config_PropManager::registerProp("Visualization", "object_default_color", "Object color",
181 // Config_Prop::Color, "225,225,225");
183 Config_PropManager::registerProp("Visualization", "result_body_color", "Body color",
184 Config_Prop::Color, ModelAPI_ResultBody::DEFAULT_COLOR());
185 Config_PropManager::registerProp("Visualization", "result_group_color", "Group color",
186 Config_Prop::Color, ModelAPI_ResultGroup::DEFAULT_COLOR());
187 Config_PropManager::registerProp("Visualization", "result_construction_color", "Construction color",
188 Config_Prop::Color, ModelAPI_ResultConstruction::DEFAULT_COLOR());
189 Config_PropManager::registerProp("Visualization", "result_part_color", "Part color",
190 Config_Prop::Color, ModelAPI_ResultPart::DEFAULT_COLOR());
193 ModuleBase_Preferences::resourceMgr()->integerValue("Viewer", "selection", TopAbs_FACE);
196 //******************************************************
197 XGUI_Workshop::~XGUI_Workshop(void)
202 //******************************************************
203 void XGUI_Workshop::startApplication()
207 Config_PropManager::registerProp("Plugins", "default_path", "Default Path",
208 Config_Prop::Directory, "");
210 //Initialize event listening
211 myEventsListener->initializeEventListening();
213 registerValidators();
215 // Calling of loadCustomProps before activating module is required
216 // by Config_PropManger to restore user-defined path to plugins
217 ModuleBase_Preferences::loadCustomProps();
221 myMainWindow->show();
222 updateCommandStatus();
227 myViewerProxy->connectViewProxy();
228 connect(myViewerProxy, SIGNAL(trihedronVisibilityChanged(bool)),
229 SLOT(onTrihedronVisibilityChanged(bool)));
231 emit applicationStarted();
234 void XGUI_Workshop::activateModule()
236 myModule->activateSelectionFilters();
238 connect(myDisplayer, SIGNAL(objectDisplayed(ObjectPtr, AISObjectPtr)),
239 myModule, SLOT(onObjectDisplayed(ObjectPtr, AISObjectPtr)));
240 connect(myDisplayer, SIGNAL(beforeObjectErase(ObjectPtr, AISObjectPtr)),
241 myModule, SLOT(onBeforeObjectErase(ObjectPtr, AISObjectPtr)));
243 updateCommandStatus();
245 // TODO: get default selection mode
247 // activate visualized objects in the viewer
248 activateObjectsSelection(displayer()->displayedObjects());
249 myOperationMgr->activate();
252 void XGUI_Workshop::deactivateModule()
254 myModule->deactivateSelectionFilters();
256 // remove internal displayer filter
257 displayer()->deactivateSelectionFilters();
259 disconnect(myDisplayer, SIGNAL(objectDisplayed(ObjectPtr, AISObjectPtr)),
260 myModule, SLOT(onObjectDisplayed(ObjectPtr, AISObjectPtr)));
261 disconnect(myDisplayer, SIGNAL(beforeObjectErase(ObjectPtr, AISObjectPtr)),
262 myModule, SLOT(onBeforeObjectErase(ObjectPtr, AISObjectPtr)));
264 XGUI_Displayer* aDisplayer = displayer();
265 QObjectPtrList aDisplayed = aDisplayer->displayedObjects();
266 aDisplayer->deactivateObjects(aDisplayed, true);
268 myOperationMgr->deactivate();
271 //******************************************************
272 void XGUI_Workshop::initMenu()
274 myContextMenuMgr->createActions();
277 // Create only Undo, Redo commands
278 QAction* aAction = salomeConnector()->addDesktopCommand("UNDO_CMD", tr("Undo"),
279 tr("Undo last command"),
280 QIcon(":pictures/undo.png"),
281 QKeySequence::Undo, false, "MEN_DESK_EDIT");
282 QString aToolBarTitle = tr( "INF_DESK_TOOLBAR_STANDARD" );
283 salomeConnector()->addActionInToolbar( aAction,aToolBarTitle );
285 connect(aAction, SIGNAL(triggered(bool)), this, SLOT(onUndo()));
286 addHistoryMenu(aAction, SIGNAL(updateUndoHistory(const QList<ActionInfo>&)), SLOT(onUndo(int)));
288 aAction = salomeConnector()->addDesktopCommand("REDO_CMD", tr("Redo"), tr("Redo last command"),
289 QIcon(":pictures/redo.png"), QKeySequence::Redo,
290 false, "MEN_DESK_EDIT");
291 salomeConnector()->addActionInToolbar( aAction, aToolBarTitle );
293 connect(aAction, SIGNAL(triggered(bool)), this, SLOT(onRedo()));
294 addHistoryMenu(aAction, SIGNAL(updateRedoHistory(const QList<ActionInfo>&)), SLOT(onRedo(int)));
296 salomeConnector()->addDesktopMenuSeparator("MEN_DESK_EDIT");
297 //aAction = salomeConnector()->addDesktopCommand("REBUILD_CMD", tr("Rebuild"), tr("Rebuild data objects"),
298 // QIcon(":pictures/rebuild.png"), QKeySequence(),
299 // false, "MEN_DESK_EDIT");
300 //salomeConnector()->addActionInToolbar( aAction, aToolBarTitle );
302 //connect(aAction, SIGNAL(triggered(bool)), this, SLOT(onRebuild()));
303 //salomeConnector()->addDesktopMenuSeparator("MEN_DESK_EDIT");
305 aAction = salomeConnector()->addDesktopCommand("SAVEAS_CMD", tr("Export native..."), tr("Export the current document into a native file"),
306 QIcon(), QKeySequence(),
307 false, "MEN_DESK_FILE");
308 connect(aAction, SIGNAL(triggered(bool)), this, SLOT(onSaveAs()));
310 aAction = salomeConnector()->addDesktopCommand("OPEN_CMD", tr("Import native..."), tr("Import native file"),
311 QIcon(), QKeySequence(),
312 false, "MEN_DESK_FILE");
313 connect(aAction, SIGNAL(triggered(bool)), this, SLOT(onOpen()));
314 salomeConnector()->addDesktopMenuSeparator("MEN_DESK_FILE");
317 // File commands group
318 AppElements_MenuGroupPanel* aGroup = myMainWindow->menuObject()->generalPage();
320 AppElements_Command* aCommand;
322 aCommand = aGroup->addFeature("SAVE_CMD", tr("Save"), tr("Save the document"),
323 QIcon(":pictures/save.png"), QKeySequence::Save);
324 aCommand->connectTo(this, SLOT(onSave()));
325 //aCommand->disable();
327 aCommand = aGroup->addFeature("SAVEAS_CMD", tr("Save as..."), tr("Save the document into a file"),
328 QIcon(":pictures/save.png"), QKeySequence());
329 aCommand->connectTo(this, SLOT(onSaveAs()));
331 QString aUndoId = "UNDO_CMD";
332 aCommand = aGroup->addFeature(aUndoId, tr("Undo"), tr("Undo last command"),
333 QIcon(":pictures/undo.png"), QKeySequence::Undo);
334 aCommand->connectTo(this, SLOT(onUndo()));
335 AppElements_Button* aUndoButton = qobject_cast<AppElements_Button*>(aGroup->widget(aUndoId));
336 addHistoryMenu(aUndoButton,
337 SIGNAL(updateUndoHistory(const QList<ActionInfo>&)),
340 QString aRedoId = "REDO_CMD";
341 aCommand = aGroup->addFeature(aRedoId, tr("Redo"), tr("Redo last command"),
342 QIcon(":pictures/redo.png"), QKeySequence::Redo);
343 aCommand->connectTo(this, SLOT(onRedo()));
344 AppElements_Button* aRedoButton = qobject_cast<AppElements_Button*>(aGroup->widget(aRedoId));
345 addHistoryMenu(aRedoButton,
346 SIGNAL(updateRedoHistory(const QList<ActionInfo>&)),
349 //aCommand = aGroup->addFeature("REBUILD_CMD", tr("Rebuild"), tr("Rebuild data objects"),
350 // QIcon(":pictures/rebuild.png"), QKeySequence());
351 //aCommand->connectTo(this, SLOT(onRebuild()));
353 //aCommand->disable();
355 aCommand = aGroup->addFeature("OPEN_CMD", tr("Open..."), tr("Open a new document"),
356 QIcon(":pictures/open.png"), QKeySequence::Open);
357 aCommand->connectTo(this, SLOT(onOpen()));
359 aCommand = aGroup->addFeature("PREF_CMD", tr("Preferences"), tr("Edit preferences"),
360 QIcon(":pictures/preferences.png"), QKeySequence::Preferences);
361 aCommand->connectTo(this, SLOT(onPreferences()));
363 aCommand = aGroup->addFeature("EXIT_CMD", tr("Exit"), tr("Exit application"),
364 QIcon(":pictures/close.png"), QKeySequence::Close);
365 aCommand->connectTo(this, SLOT(onExit()));
370 AppElements_Workbench* XGUI_Workshop::addWorkbench(const QString& theName)
372 AppElements_MainMenu* aMenuBar = myMainWindow->menuObject();
373 return aMenuBar->addWorkbench(theName);
377 //******************************************************
378 QMainWindow* XGUI_Workshop::desktop() const
381 return salomeConnector()->desktop();
387 //******************************************************
388 void XGUI_Workshop::onStartWaiting()
390 if (Events_LongOp::isPerformed()) {
391 QApplication::setOverrideCursor(QCursor(Qt::WaitCursor));
395 //******************************************************
396 void XGUI_Workshop::onAcceptActionClicked()
398 QAction* anAction = dynamic_cast<QAction*>(sender());
399 XGUI_OperationMgr* anOperationMgr = operationMgr();
400 if (anOperationMgr) {
401 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
402 (anOperationMgr->currentOperation());
404 //if (errorMgr()->canProcessClick(anAction, aFOperation->feature()))
405 myOperationMgr->onCommitOperation();
410 //******************************************************
411 void XGUI_Workshop::onPreivewActionClicked()
413 std::shared_ptr<Events_Message> aMsg = std::shared_ptr<Events_Message>(
414 new Events_Message(Events_Loop::eventByName(EVENT_PREVIEW_REQUESTED)));
415 Events_Loop::loop()->send(aMsg);
418 //******************************************************
419 void XGUI_Workshop::deactivateActiveObject(const ObjectPtr& theObject, const bool theUpdateViewer)
421 if (!myModule->canActivateSelection(theObject)) {
422 if (myDisplayer->isActive(theObject)) {
423 QObjectPtrList anObjects;
424 anObjects.append(theObject);
425 myDisplayer->deactivateObjects(anObjects, theUpdateViewer);
430 //******************************************************
431 bool XGUI_Workshop::isFeatureOfNested(const FeaturePtr& theFeature)
433 bool aHasNested = false;
434 std::string aFeatureKind = theFeature->getKind();
436 XGUI_SalomeConnector* aSalomeConnector = salomeConnector();
437 if (aSalomeConnector->isFeatureOfNested(actionsMgr()->action(aFeatureKind.c_str())))
440 AppElements_MainMenu* aMenuBar = mainWindow()->menuObject();
441 AppElements_Command* aCommand = aMenuBar->feature(aFeatureKind.c_str());
442 if (aCommand && aCommand->button()->additionalButtonWidget())
448 void XGUI_Workshop::setPropertyPanel(ModuleBase_Operation* theOperation)
450 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
455 myPropertyPanel->cleanContent();
457 QList<ModuleBase_ModelWidget*> aWidgets;
458 if (!module()->createWidgets(theOperation, aWidgets)) {
459 QString aXmlRepr = aFOperation->getDescription()->xmlRepresentation();
460 ModuleBase_WidgetFactory aFactory(aXmlRepr.toStdString(), myModuleConnector);
461 aFactory.createWidget(myPropertyPanel->contentWidget());
462 aWidgets = aFactory.getModelWidgets();
465 // check compatibility of feature and widgets
466 FeaturePtr aFeature = aFOperation->feature();
467 std::string aFeatureKind = aFeature->getKind();
468 foreach (ModuleBase_ModelWidget* aWidget, aWidgets) {
469 if (!aWidget->attributeID().empty() && !aFeature->attribute(aWidget->attributeID()).get()) {
470 std::string anErrorMsg = "The feature '" + aFeatureKind + "' has no attribute '"
471 + aWidget->attributeID() + "' used by widget '"
472 + aWidget->metaObject()->className() + "'.";
473 Events_Error::send(anErrorMsg);
474 myPropertyPanel->cleanContent();
478 foreach (ModuleBase_ModelWidget* aWidget, aWidgets) {
479 bool isStoreValue = !aFOperation->isEditOperation() &&
480 !aWidget->getDefaultValue().empty() &&
481 !aWidget->isComputedDefault();
482 aWidget->setFeature(aFeature, isStoreValue);
483 aWidget->enableFocusProcessing();
486 // update visible state of Preview button
488 bool anIsAutoPreview = mySalomeConnector->featureInfo(aFeatureKind.c_str())->isAutoPreview();
490 AppElements_MainMenu* aMenuBar = mainWindow()->menuObject();
491 AppElements_Command* aCommand = aMenuBar->feature(aFeatureKind.c_str());
492 bool anIsAutoPreview = aCommand && aCommand->featureMessage()->isAutoPreview();
494 if (!anIsAutoPreview) {
495 myPropertyPanel->findButton(PROP_PANEL_PREVIEW)->setVisible(true);
496 // send signal about preview should not be computed automatically, click on preview
497 // button should initiate it
498 std::shared_ptr<Events_Message> aMsg = std::shared_ptr<Events_Message>(
499 new Events_Message(Events_Loop::eventByName(EVENT_PREVIEW_BLOCKED)));
500 Events_Loop::loop()->send(aMsg);
502 myPropertyPanel->setModelWidgets(aWidgets);
503 aFOperation->setPropertyPanel(myPropertyPanel);
505 myModule->propertyPanelDefined(theOperation);
507 #ifndef DEBUG_FEATURE_NAME
508 myPropertyPanel->setWindowTitle(theOperation->getDescription()->description());
510 std::string aFeatureName = aFeature->name();
511 myPropertyPanel->setWindowTitle(QString("%1: %2").arg(theOperation->getDescription()->description())
512 .arg(aFeatureName.c_str()));
515 myErrorMgr->setPropertyPanel(myPropertyPanel);
518 void XGUI_Workshop::connectToPropertyPanel(const bool isToConnect)
520 XGUI_PropertyPanel* aPropertyPanel = propertyPanel();
521 if (aPropertyPanel) {
522 const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
523 foreach (ModuleBase_ModelWidget* aWidget, aWidgets) {
524 myModule->connectToPropertyPanel(aWidget, isToConnect);
526 connect(aWidget, SIGNAL(valueStateChanged(int)), this, SLOT(onWidgetStateChanged(int)));
527 connect(aWidget, SIGNAL(valuesChanged()), this, SLOT(onValuesChanged()));
530 disconnect(aWidget, SIGNAL(valueStateChanged(int)), this, SLOT(onWidgetStateChanged(int)));
531 disconnect(aWidget, SIGNAL(valuesChanged()), this, SLOT(onValuesChanged()));
537 //******************************************************
538 void XGUI_Workshop::onOperationStarted(ModuleBase_Operation* theOperation)
540 setGrantedFeatures(theOperation);
541 myModule->operationStarted(theOperation);
544 //******************************************************
545 void XGUI_Workshop::onOperationResumed(ModuleBase_Operation* theOperation)
547 setGrantedFeatures(theOperation);
549 if (theOperation->getDescription()->hasXmlRepresentation()) { //!< No need for property panel
550 setPropertyPanel(theOperation);
551 connectToPropertyPanel(true);
553 updateCommandStatus();
555 myModule->operationResumed(theOperation);
559 //******************************************************
560 void XGUI_Workshop::onOperationStopped(ModuleBase_Operation* theOperation)
562 updateCommandStatus();
564 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
569 ModuleBase_ISelection* aSel = mySelector->selection();
570 QObjectPtrList aObj = aSel->selectedPresentations();
571 //!< No need for property panel
573 myPropertyPanel->cleanContent();
575 connectToPropertyPanel(false);
576 myModule->operationStopped(aFOperation);
578 // the deactivated objects of the current operation should be activated back.
579 // They were deactivated on operation start or an object redisplay
580 QObjectPtrList anObjects;
581 FeaturePtr aFeature = aFOperation->feature();
582 if (aFeature.get()) { // feature may be not created (plugin load fail)
583 if (myDisplayer->isVisible(aFeature) && !myDisplayer->isActive(aFeature))
584 anObjects.append(aFeature);
585 std::list<ResultPtr> aResults = aFeature->results();
586 std::list<ResultPtr>::const_iterator aIt;
587 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
588 ResultPtr anObject = *aIt;
589 if (myDisplayer->isVisible(anObject) && !myDisplayer->isActive(anObject)) {
590 anObjects.append(anObject);
594 activateObjectsSelection(anObjects);
598 void XGUI_Workshop::onOperationCommitted(ModuleBase_Operation* theOperation)
600 myModule->operationCommitted(theOperation);
603 void XGUI_Workshop::onOperationAborted(ModuleBase_Operation* theOperation)
605 myModule->operationAborted(theOperation);
608 void XGUI_Workshop::setGrantedFeatures(ModuleBase_Operation* theOperation)
610 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
614 QStringList aGrantedIds;
615 if (isSalomeMode()) {
616 const std::shared_ptr<Config_FeatureMessage>& anInfo =
617 mySalomeConnector->featureInfo(theOperation->id());
619 aGrantedIds = QString::fromStdString(anInfo->nestedFeatures())
620 .split(" ", QString::SkipEmptyParts);
623 aGrantedIds = myActionsMgr->nestedCommands(theOperation->id());
625 ModuleBase_IModule* aModule = module();
627 aModule->grantedOperationIds(theOperation, aGrantedIds);
629 aFOperation->setGrantedOperationIds(aGrantedIds);
634 * Saves document with given name.
636 void XGUI_Workshop::saveDocument(const QString& theName, std::list<std::string>& theFileNames)
638 QApplication::restoreOverrideCursor();
639 SessionPtr aMgr = ModelAPI_Session::get();
640 aMgr->save(theName.toLatin1().constData(), theFileNames);
641 QApplication::restoreOverrideCursor();
644 bool XGUI_Workshop::abortAllOperations()
646 return myOperationMgr->abortAllOperations();
649 //******************************************************
650 void XGUI_Workshop::onOpen()
652 if(!abortAllOperations())
654 //save current file before close if modified
655 SessionPtr aSession = ModelAPI_Session::get();
656 if (aSession->isModified()) {
657 //TODO(sbh): re-launch the app?
658 int anAnswer = QMessageBox::question(
659 desktop(), tr("Save current file"),
660 tr("The document is modified, save before opening another?"),
661 QMessageBox::Save | QMessageBox::Discard | QMessageBox::Cancel, QMessageBox::Cancel);
662 if (anAnswer == QMessageBox::Save) {
664 } else if (anAnswer == QMessageBox::Cancel) {
670 //show file dialog, check if readable and open
671 myCurrentDir = QFileDialog::getExistingDirectory(desktop(), tr("Select directory"));
672 if (myCurrentDir.isEmpty())
674 QFileInfo aFileInfo(myCurrentDir);
675 if (!aFileInfo.exists() || !aFileInfo.isReadable()) {
676 QMessageBox::critical(desktop(), tr("Warning"), tr("Unable to open the file."));
680 QApplication::setOverrideCursor(Qt::WaitCursor);
681 aSession->closeAll();
682 aSession->load(myCurrentDir.toLatin1().constData());
683 myObjectBrowser->rebuildDataTree();
684 updateCommandStatus();
685 QApplication::restoreOverrideCursor();
688 //******************************************************
689 void XGUI_Workshop::onNew()
691 QApplication::setOverrideCursor(Qt::WaitCursor);
692 if (objectBrowser() == 0) {
694 mySelector->connectViewers();
696 myViewerProxy->connectToViewer();
699 myMainWindow->showPythonConsole();
700 QMdiSubWindow* aWnd = myMainWindow->viewer()->createView();
701 aWnd->showMaximized();
702 updateCommandStatus();
704 myContextMenuMgr->connectViewer();
705 QApplication::restoreOverrideCursor();
709 //******************************************************
710 void XGUI_Workshop::onExit()
712 SessionPtr aMgr = ModelAPI_Session::get();
713 if (aMgr->isModified()) {
714 int anAnswer = QMessageBox::question(
715 myMainWindow, tr("Save current file"), tr("The document is modified, save before exit?"),
716 QMessageBox::Save | QMessageBox::Discard | QMessageBox::Cancel, QMessageBox::Cancel);
717 if (anAnswer == QMessageBox::Save) {
718 bool saved = onSave();
722 } else if (anAnswer == QMessageBox::Cancel) {
729 //******************************************************
730 void XGUI_Workshop::onPreferences()
732 ModuleBase_Prefs aModif;
733 ModuleBase_Preferences::editPreferences(aModif);
734 if (aModif.size() > 0) {
736 foreach (ModuleBase_Pref aPref, aModif)
738 aSection = aPref.first;
739 if (aSection == ModuleBase_Preferences::VIEWER_SECTION) {
740 myMainWindow->viewer()->updateFromResources();
741 } else if (aSection == ModuleBase_Preferences::MENU_SECTION) {
742 myMainWindow->menuObject()->updateFromResources();
745 displayer()->redisplayObjects();
750 //******************************************************
751 void XGUI_Workshop::onTrihedronVisibilityChanged(bool theState)
753 XGUI_Displayer* aDisplayer = displayer();
755 aDisplayer->displayTrihedron(theState);
758 //******************************************************
759 bool XGUI_Workshop::onSave()
761 if(!abortAllOperations())
763 if (myCurrentDir.isEmpty()) {
766 std::list<std::string> aFiles;
767 saveDocument(myCurrentDir, aFiles);
768 updateCommandStatus();
770 myMainWindow->setModifiedState(false);
775 //******************************************************
776 bool XGUI_Workshop::onSaveAs()
778 if(!abortAllOperations())
780 QFileDialog dialog(desktop());
781 dialog.setWindowTitle(tr("Select directory to save files..."));
782 dialog.setFileMode(QFileDialog::Directory);
783 dialog.setFilter(tr("Directories (*)"));
784 dialog.setOptions(QFileDialog::HideNameFilterDetails | QFileDialog::ShowDirsOnly);
785 dialog.setViewMode(QFileDialog::Detail);
787 if (!dialog.exec()) {
791 QString aTempDir = dialog.selectedFiles().first();
793 if (aDir.exists() && !aDir.entryInfoList(QDir::NoDotAndDotDot | QDir::AllEntries).isEmpty()) {
794 int answer = QMessageBox::question(
796 //: Title of the dialog which asks user if he wants to save study in existing non-empty folder
798 tr("The directory already contains some files, save anyway?"),
799 QMessageBox::Save | QMessageBox::Cancel);
800 if (answer == QMessageBox::Cancel) {
804 myCurrentDir = aTempDir;
806 myMainWindow->setCurrentDir(myCurrentDir, false);
807 myMainWindow->setModifiedState(false);
812 //******************************************************
813 void XGUI_Workshop::onUndo(int theTimes)
815 objectBrowser()->treeView()->setCurrentIndex(QModelIndex());
816 SessionPtr aMgr = ModelAPI_Session::get();
817 std::list<std::string> aUndoList = aMgr->undoList();
818 if (aMgr->isOperation()) {
819 /// this is important for nested operations
820 /// when sketch operation is active, this condition is false and
821 /// the sketch operation is not aborted
822 operationMgr()->onAbortOperation();
824 std::list<std::string>::const_iterator aIt = aUndoList.cbegin();
825 for (int i = 0; (i < theTimes) && (aIt != aUndoList.cend()); ++i, ++aIt) {
827 if (QString((*aIt).c_str()) == MOVE_TO_END_COMMAND)
828 myObjectBrowser->rebuildDataTree();
831 operationMgr()->updateApplyOfOperations();
832 updateCommandStatus();
835 //******************************************************
836 void XGUI_Workshop::onRedo(int theTimes)
838 // the viewer update should be blocked in order to avoid the features blinking. For the created
839 // feature a results are created, the flush of the created signal caused the viewer redisplay for
840 // each created result. After a redisplay signal is flushed. So, the viewer update is blocked until
841 // redo of all possible objects happens
842 bool isUpdateEnabled = myDisplayer->enableUpdateViewer(false);
844 objectBrowser()->treeView()->setCurrentIndex(QModelIndex());
845 SessionPtr aMgr = ModelAPI_Session::get();
846 std::list<std::string> aRedoList = aMgr->redoList();
847 if (aMgr->isOperation()) {
848 /// this is important for nested operations
849 /// when sketch operation is active, this condition is false and
850 /// the sketch operation is not aborted
851 operationMgr()->onAbortOperation();
853 std::list<std::string>::const_iterator aIt = aRedoList.cbegin();
854 for (int i = 0; (i < theTimes) && (aIt != aRedoList.cend()); ++i, ++aIt) {
856 if (QString((*aIt).c_str()) == MOVE_TO_END_COMMAND)
857 myObjectBrowser->rebuildDataTree();
859 operationMgr()->updateApplyOfOperations();
860 updateCommandStatus();
862 // unblock the viewer update functionality and make update on purpose
863 myDisplayer->enableUpdateViewer(isUpdateEnabled);
864 myDisplayer->updateViewer();
867 //******************************************************
868 //void XGUI_Workshop::onRebuild()
870 // SessionPtr aMgr = ModelAPI_Session::get();
871 // bool aWasOperation = aMgr->isOperation(); // keep this value
872 // if (!aWasOperation) {
873 // aMgr->startOperation("Rebuild");
875 // static const Events_ID aRebuildEvent = Events_Loop::loop()->eventByName("Rebuild");
876 // Events_Loop::loop()->send(std::shared_ptr<Events_Message>(
877 // new Events_Message(aRebuildEvent, this)));
878 // if (!aWasOperation) {
879 // aMgr->finishOperation();
881 // updateCommandStatus();
884 //******************************************************
885 void XGUI_Workshop::onWidgetStateChanged(int thePreviousState)
887 ModuleBase_ModelWidget* anActiveWidget = 0;
888 ModuleBase_Operation* anOperation = myOperationMgr->currentOperation();
890 ModuleBase_IPropertyPanel* aPanel = anOperation->propertyPanel();
892 anActiveWidget = aPanel->activeWidget();
895 operationMgr()->onValidateOperation();
897 myModule->widgetStateChanged(thePreviousState);
900 //******************************************************
901 void XGUI_Workshop::onValuesChanged()
903 ModuleBase_ModelWidget* aSenderWidget = (ModuleBase_ModelWidget*)(sender());
904 if (!aSenderWidget || aSenderWidget->canAcceptFocus())
907 ModuleBase_ModelWidget* anActiveWidget = 0;
908 ModuleBase_Operation* anOperation = myOperationMgr->currentOperation();
910 ModuleBase_IPropertyPanel* aPanel = anOperation->propertyPanel();
912 anActiveWidget = aPanel->activeWidget();
914 if (anActiveWidget) {
915 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
917 if (aWidgetValidated)
918 aWidgetValidated->clearValidatedCash();
922 ModuleBase_IModule* XGUI_Workshop::loadModule(const QString& theModule)
924 QString libName = QString::fromStdString(library(theModule.toStdString()));
925 if (libName.isEmpty()) {
926 qWarning(qPrintable(tr("Information about module \"%1\" doesn't exist.").arg(theModule)));
931 CREATE_FUNC crtInst = 0;
934 HINSTANCE modLib = ::LoadLibrary((LPTSTR) qPrintable(libName));
938 FORMAT_MESSAGE_ALLOCATE_BUFFER | FORMAT_MESSAGE_FROM_SYSTEM | FORMAT_MESSAGE_IGNORE_INSERTS,
939 0, ::GetLastError(), 0, (LPTSTR) & lpMsgBuf, 0, 0);
940 QString aMsg((char*) &lpMsgBuf);
941 err = QString("Failed to load %1. %2").arg(libName).arg(aMsg);
942 ::LocalFree(lpMsgBuf);
944 crtInst = (CREATE_FUNC) ::GetProcAddress(modLib, CREATE_MODULE);
948 FORMAT_MESSAGE_ALLOCATE_BUFFER | FORMAT_MESSAGE_FROM_SYSTEM
949 | FORMAT_MESSAGE_IGNORE_INSERTS,
950 0, ::GetLastError(), 0, (LPTSTR) & lpMsgBuf, 0, 0);
951 QString aMsg((char*) &lpMsgBuf);
952 err = QString("Failed to find %1 function. %2").arg( CREATE_MODULE).arg(aMsg);
953 ::LocalFree(lpMsgBuf);
957 void* modLib = dlopen( libName.toLatin1(), RTLD_LAZY | RTLD_GLOBAL );
959 err = QString( "Can not load library %1. %2" ).arg( libName ).arg( dlerror() );
961 crtInst = (CREATE_FUNC)dlsym( modLib, CREATE_MODULE );
963 err = QString( "Failed to find function %1. %2" ).arg( CREATE_MODULE ).arg( dlerror() );
968 ModuleBase_IModule* aModule = crtInst ? crtInst(myModuleConnector) : 0;
970 if (!err.isEmpty()) {
972 Events_Error::send(err.toStdString());
974 qWarning(qPrintable(err));
980 //******************************************************
981 bool XGUI_Workshop::createModule()
983 Config_ModuleReader aModuleReader;
984 QString moduleName = QString::fromStdString(aModuleReader.getModuleName());
985 myModule = loadModule(moduleName);
989 //connect(myDisplayer, SIGNAL(objectDisplayed(ObjectPtr, AISObjectPtr)),
990 // myModule, SLOT(onObjectDisplayed(ObjectPtr, AISObjectPtr)));
991 //connect(myDisplayer, SIGNAL(beforeObjectErase(ObjectPtr, AISObjectPtr)),
992 // myModule, SLOT(onBeforeObjectErase(ObjectPtr, AISObjectPtr)));
994 myModule->createFeatures();
995 //myActionsMgr->update();
999 //******************************************************
1000 void XGUI_Workshop::updateCommandStatus()
1002 QList<QAction*> aCommands;
1004 aCommands = salomeConnector()->commandList();
1006 AppElements_MainMenu* aMenuBar = myMainWindow->menuObject();
1007 foreach (AppElements_Command* aCmd, aMenuBar->features())
1008 aCommands.append(aCmd);
1010 SessionPtr aMgr = ModelAPI_Session::get();
1011 if (aMgr->hasModuleDocument()) {
1012 foreach(QAction* aCmd, aCommands) {
1013 QString aId = aCmd->data().toString();
1014 if (aId == "UNDO_CMD")
1015 aCmd->setEnabled(myModule->canUndo());
1016 else if (aId == "REDO_CMD")
1017 aCmd->setEnabled(myModule->canRedo());
1019 // Enable all commands
1020 aCmd->setEnabled(true);
1024 foreach(QAction* aCmd, aCommands) {
1025 QString aId = aCmd->data().toString();
1026 if (aId == "NEW_CMD")
1027 aCmd->setEnabled(true);
1028 else if (aId == "EXIT_CMD")
1029 aCmd->setEnabled(true);
1031 aCmd->setEnabled(false);
1034 myActionsMgr->updateCommandsStatus();
1035 emit commandStatusUpdated();
1038 void XGUI_Workshop::updateHistory()
1040 std::list<std::string> aUndoList = ModelAPI_Session::get()->undoList();
1041 QList<ActionInfo> aUndoRes = processHistoryList(aUndoList);
1042 emit updateUndoHistory(aUndoRes);
1044 std::list<std::string> aRedoList = ModelAPI_Session::get()->redoList();
1045 QList<ActionInfo> aRedoRes = processHistoryList(aRedoList);
1046 emit updateRedoHistory(aRedoRes);
1049 //******************************************************
1050 QDockWidget* XGUI_Workshop::createObjectBrowser(QWidget* theParent)
1052 QDockWidget* aObjDock = new QDockWidget(theParent);
1053 aObjDock->setAllowedAreas(Qt::LeftDockWidgetArea | Qt::RightDockWidgetArea | Qt::BottomDockWidgetArea);
1054 aObjDock->setWindowTitle(tr("Object browser"));
1055 aObjDock->setStyleSheet(
1056 "::title { position: relative; padding-left: 5px; text-align: left center }");
1057 myObjectBrowser = new XGUI_ObjectsBrowser(aObjDock);
1058 myModule->customizeObjectBrowser(myObjectBrowser);
1059 aObjDock->setWidget(myObjectBrowser);
1061 myContextMenuMgr->connectObjectBrowser();
1065 //******************************************************
1067 * Creates dock widgets, places them in corresponding area
1068 * and tabifies if necessary.
1070 void XGUI_Workshop::createDockWidgets()
1072 QMainWindow* aDesktop = desktop();
1073 QDockWidget* aObjDock = createObjectBrowser(aDesktop);
1074 aDesktop->addDockWidget(Qt::LeftDockWidgetArea, aObjDock);
1075 myPropertyPanel = new XGUI_PropertyPanel(aDesktop, myOperationMgr);
1076 myPropertyPanel->setupActions(myActionsMgr);
1077 myPropertyPanel->setAllowedAreas(Qt::LeftDockWidgetArea | Qt::RightDockWidgetArea | Qt::BottomDockWidgetArea);
1078 aDesktop->addDockWidget(Qt::LeftDockWidgetArea, myPropertyPanel);
1079 hidePropertyPanel(); ///<! Invisible by default
1080 hideObjectBrowser();
1081 aDesktop->tabifyDockWidget(aObjDock, myPropertyPanel);
1082 myPropertyPanel->installEventFilter(myOperationMgr);
1084 QAction* aOkAct = myActionsMgr->operationStateAction(XGUI_ActionsMgr::Accept);
1085 connect(aOkAct, SIGNAL(triggered()), this, SLOT(onAcceptActionClicked()));
1087 QAction* aCancelAct = myActionsMgr->operationStateAction(XGUI_ActionsMgr::Abort);
1088 connect(aCancelAct, SIGNAL(triggered()), myOperationMgr, SLOT(onAbortOperation()));
1090 QAction* aPreviewAct = myActionsMgr->operationStateAction(XGUI_ActionsMgr::Preview);
1091 connect(aPreviewAct, SIGNAL(triggered()), this, SLOT(onPreivewActionClicked()));
1093 connect(myPropertyPanel, SIGNAL(keyReleased(QObject*, QKeyEvent*)),
1094 myOperationMgr, SLOT(onKeyReleased(QObject*, QKeyEvent*)));
1095 connect(myPropertyPanel, SIGNAL(enterClicked(QObject*)),
1096 myOperationMgr, SLOT(onProcessEnter(QObject*)));
1099 //******************************************************
1100 void XGUI_Workshop::showPropertyPanel()
1102 QAction* aViewAct = myPropertyPanel->toggleViewAction();
1103 ///<! Restore ability to close panel from the window's menu
1104 aViewAct->setEnabled(true);
1105 myPropertyPanel->show();
1106 myPropertyPanel->raise();
1108 // The next code is necessary to made the property panel the active window
1109 // in order to operation manager could process key events of the panel.
1110 // otherwise they are ignored. It happens only if the same(activateWindow) is
1111 // not happened by property panel activation(e.g. resume operation of Sketch)
1112 ModuleBase_Tools::activateWindow(myPropertyPanel, "XGUI_Workshop::showPropertyPanel()");
1113 ModuleBase_Tools::setFocus(myPropertyPanel, "XGUI_Workshop::showPropertyPanel()");
1116 //******************************************************
1117 void XGUI_Workshop::hidePropertyPanel()
1119 QAction* aViewAct = myPropertyPanel->toggleViewAction();
1120 ///<! Do not allow to show empty property panel
1121 aViewAct->setEnabled(false);
1122 myPropertyPanel->hide();
1124 // the property panel is active window of the desktop, when it is
1125 // hidden, it is undefined which window becomes active. By this reason
1126 // it is defined to perform the desktop as the active window.
1127 // in SALOME mode, workstack made the PyConsole the active window,
1128 // set the focus on it. As a result, shortcuts of the application, like
1129 // are processed by this console. For example Undo actions.
1130 // It is possible that this code is to be moved to SHAPER package
1131 QMainWindow* aDesktop = desktop();
1132 ModuleBase_Tools::activateWindow(aDesktop, "XGUI_Workshop::hidePropertyPanel()");
1133 ModuleBase_Tools::setFocus(aDesktop, "XGUI_Workshop::showPropertyPanel()");
1136 //******************************************************
1137 void XGUI_Workshop::showObjectBrowser()
1139 if (!isSalomeMode())
1140 myObjectBrowser->parentWidget()->show();
1143 //******************************************************
1144 void XGUI_Workshop::hideObjectBrowser()
1146 if (!isSalomeMode())
1147 myObjectBrowser->parentWidget()->hide();
1150 //******************************************************
1151 void XGUI_Workshop::salomeViewerSelectionChanged()
1153 emit salomeViewerSelection();
1156 //**************************************************************
1157 ModuleBase_IViewer* XGUI_Workshop::salomeViewer() const
1159 return mySalomeConnector->viewer();
1162 //**************************************************************
1163 void XGUI_Workshop::onContextMenuCommand(const QString& theId, bool isChecked)
1165 QObjectPtrList aObjects = mySelector->selection()->selectedObjects();
1166 if (theId == "DELETE_CMD")
1168 else if (theId == "CLEAN_HISTORY_CMD")
1170 else if (theId == "MOVE_CMD")
1172 else if (theId == "COLOR_CMD")
1173 changeColor(aObjects);
1174 else if (theId == "SHOW_CMD") {
1175 showObjects(aObjects, true);
1176 mySelector->updateSelectionBy(ModuleBase_ISelection::Browser);
1178 else if (theId == "HIDE_CMD")
1179 showObjects(aObjects, false);
1180 else if (theId == "SHOW_ONLY_CMD") {
1181 showOnlyObjects(aObjects);
1182 mySelector->updateSelectionBy(ModuleBase_ISelection::Browser);
1184 else if (theId == "SHADING_CMD")
1185 setDisplayMode(aObjects, XGUI_Displayer::Shading);
1186 else if (theId == "WIREFRAME_CMD")
1187 setDisplayMode(aObjects, XGUI_Displayer::Wireframe);
1188 else if (theId == "HIDEALL_CMD") {
1189 QObjectPtrList aList = myDisplayer->displayedObjects();
1190 foreach (ObjectPtr aObj, aList) {
1191 if (module()->canEraseObject(aObj))
1192 aObj->setDisplayed(false);
1194 Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
1195 } else if (theId == "SELECT_VERTEX_CMD") {
1196 setViewerSelectionMode(TopAbs_VERTEX);
1197 } else if (theId == "SELECT_EDGE_CMD") {
1198 setViewerSelectionMode(TopAbs_EDGE);
1199 } else if (theId == "SELECT_FACE_CMD") {
1200 setViewerSelectionMode(TopAbs_FACE);
1201 } else if (theId == "SELECT_RESULT_CMD") {
1202 setViewerSelectionMode(-1);
1203 } else if (theId == "SHOW_RESULTS_CMD") {
1204 highlightResults(aObjects);
1208 //**************************************************************
1209 void XGUI_Workshop::setViewerSelectionMode(int theMode)
1211 myViewerSelMode = theMode;
1212 activateObjectsSelection(myDisplayer->displayedObjects());
1215 //**************************************************************
1216 void XGUI_Workshop::activateObjectsSelection(const QObjectPtrList& theList)
1219 module()->activeSelectionModes(aModes);
1220 if (aModes.isEmpty() && (myViewerSelMode != -1))
1221 aModes.append(myViewerSelMode);
1222 myDisplayer->activateObjects(aModes, theList);
1226 //**************************************************************
1227 void XGUI_Workshop::deleteObjects()
1229 ModuleBase_IModule* aModule = module();
1230 // 1. allow the module to delete objects, do nothing if it has succeed
1231 if (aModule->deleteObjects()) {
1232 updateCommandStatus();
1236 QObjectPtrList anObjects = mySelector->selection()->selectedObjects();
1237 if (!abortAllOperations())
1239 // check whether the object can be deleted. There should not be parts which are not loaded
1240 if (!XGUI_Tools::canRemoveOrRename(desktop(), anObjects))
1243 bool hasResult = false;
1244 bool hasFeature = false;
1245 bool hasParameter = false;
1246 bool hasCompositeOwner = false;
1247 ModuleBase_Tools::checkObjects(anObjects, hasResult, hasFeature, hasParameter, hasCompositeOwner);
1248 if (!(hasFeature || hasParameter))
1251 // 3. delete objects
1252 std::set<FeaturePtr> anIgnoredFeatures;
1253 std::set<FeaturePtr> aDirectRefFeatures, aIndirectRefFeatures;
1254 findReferences(anObjects, aDirectRefFeatures, aIndirectRefFeatures);
1256 bool doDeleteReferences = true;
1257 if (isDeleteFeatureWithReferences(anObjects, aDirectRefFeatures, aIndirectRefFeatures,
1258 desktop(), doDeleteReferences)) {
1260 QString aDescription = contextMenuMgr()->action("DELETE_CMD")->text();
1261 aDescription += " " + aDescription.arg(XGUI_Tools::unionOfObjectNames(anObjects, ", "));
1262 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, module());
1263 operationMgr()->startOperation(anOpAction);
1265 // WORKAROUND, should be done before each object remove, if it presents in XGUI_DataModel tree
1266 // It is necessary to clear selection in order to avoid selection changed event during
1267 // deletion and negative consequences connected with processing of already deleted items
1268 mySelector->clearSelection();
1270 // delete and commit/abort operation in model
1271 if (deleteFeaturesInternal(anObjects, aDirectRefFeatures, aIndirectRefFeatures,
1272 anIgnoredFeatures, doDeleteReferences))
1273 operationMgr()->commitOperation();
1275 operationMgr()->abortOperation(operationMgr()->currentOperation());
1279 //**************************************************************
1280 void XGUI_Workshop::cleanHistory()
1282 if (!abortAllOperations())
1285 QObjectPtrList anObjects = mySelector->selection()->selectedObjects();
1286 QObjectPtrList aFeatures;
1287 foreach (ObjectPtr anObject, anObjects) {
1288 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(anObject);
1289 // for parameter result, use the corresponded reature to be removed
1290 if (!aFeature.get() && anObject->groupName() == ModelAPI_ResultParameter::group()) {
1291 aFeature = ModelAPI_Feature::feature(anObject);
1293 aFeatures.append(aFeature);
1296 // 1. find all referenced features
1297 QList<ObjectPtr> anUnusedObjects;
1298 std::set<FeaturePtr> aDirectRefFeatures;
1299 //foreach (ObjectPtr anObject, anObjects) {
1300 foreach (ObjectPtr anObject, aFeatures) {
1301 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(anObject);
1302 // for parameter result, use the corresponded reature to be removed
1303 //if (!aFeature.get() && anObject->groupName() == ModelAPI_ResultParameter::group()) {
1304 // aFeature = ModelAPI_Feature::feature(anObject);
1306 if (aFeature.get()) {
1307 std::set<FeaturePtr> alreadyProcessed;
1308 aDirectRefFeatures.clear();
1309 XGUI_Tools::refsDirectToFeatureInAllDocuments(aFeature, aFeature, aFeatures,
1310 aDirectRefFeatures, alreadyProcessed);
1311 if (aDirectRefFeatures.empty() && !anUnusedObjects.contains(aFeature))
1312 anUnusedObjects.append(aFeature);
1316 // 2. warn about the references remove, break the delete operation if the user chose it
1317 if (!anUnusedObjects.empty()) {
1319 foreach (const ObjectPtr& anObject, anUnusedObjects) {
1320 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(anObject);
1321 aNames.append(aFeature->name().c_str());
1323 QString anUnusedNames = aNames.join(", ");
1325 QString anActionId = "CLEAN_HISTORY_CMD";
1326 QString aDescription = contextMenuMgr()->action(anActionId)->text();
1328 QMessageBox aMessageBox(desktop());
1329 aMessageBox.setWindowTitle(aDescription);
1330 aMessageBox.setIcon(QMessageBox::Warning);
1331 aMessageBox.setStandardButtons(QMessageBox::No | QMessageBox::Yes);
1332 aMessageBox.setDefaultButton(QMessageBox::No);
1334 QString aText = QString(tr("Unused features are the following: %1.\nThese features will be deleted.\nWould you like to continue?")
1335 .arg(anUnusedNames));
1337 if (anUnusedNames.isEmpty()) {
1338 aMessageBox.setStandardButtons(QMessageBox::Ok);
1339 aMessageBox.setDefaultButton(QMessageBox::Ok);
1341 aText = QString(tr("All features are relevant, there is nothing to be deleted"));
1344 aMessageBox.setStandardButtons(QMessageBox::No | QMessageBox::Yes);
1345 aMessageBox.setDefaultButton(QMessageBox::No);
1347 aText = QString(tr("Unused features are the following: %1.\nThese features will be deleted.\nWould you like to continue?")
1348 .arg(anUnusedNames));
1351 aMessageBox.setText(aText);
1352 if (aMessageBox.exec() == QMessageBox::No)
1355 // 1. start operation
1356 aDescription += "by deleting of " + aDescription.arg(XGUI_Tools::unionOfObjectNames(anObjects, ", "));
1357 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, module());
1358 operationMgr()->startOperation(anOpAction);
1360 // WORKAROUND, should be done before each object remove, if it presents in XGUI_DataModel tree
1361 // It is necessary to clear selection in order to avoid selection changed event during
1362 // deletion and negative consequences connected with processing of already deleted items
1363 mySelector->clearSelection();
1365 std::set<FeaturePtr> anIgnoredFeatures;
1366 if (removeFeatures(anUnusedObjects, anIgnoredFeatures, anActionId)) {
1367 operationMgr()->commitOperation();
1370 operationMgr()->abortOperation(operationMgr()->currentOperation());
1374 QString anActionId = "CLEAN_HISTORY_CMD";
1375 QString aDescription = contextMenuMgr()->action(anActionId)->text();
1377 QMessageBox aMessageBox(desktop());
1378 aMessageBox.setWindowTitle(aDescription);
1379 aMessageBox.setIcon(QMessageBox::Warning);
1380 aMessageBox.setStandardButtons(QMessageBox::No | QMessageBox::Yes);
1381 aMessageBox.setDefaultButton(QMessageBox::No);
1384 aMessageBox.setStandardButtons(QMessageBox::Ok);
1385 aMessageBox.setDefaultButton(QMessageBox::Ok);
1387 aText = QString(tr("All features are relevant, there is nothing to be deleted"));
1388 aMessageBox.setText(aText);
1390 if (aMessageBox.exec() == QMessageBox::No)
1395 //**************************************************************
1396 void XGUI_Workshop::moveObjects()
1398 if (!abortAllOperations())
1401 SessionPtr aMgr = ModelAPI_Session::get();
1403 QString anActionId = "MOVE_CMD";
1404 QString aDescription = contextMenuMgr()->action(anActionId)->text();
1405 aMgr->startOperation(aDescription.toStdString());
1407 QObjectPtrList anObjects = mySelector->selection()->selectedObjects();
1408 // It is necessary to clear selection in order to avoid selection changed event during
1409 // moving and negative consequences connected with processing of already moved items
1410 mySelector->clearSelection();
1411 // check whether the object can be moved. There should not be parts which are not loaded
1412 if (!XGUI_Tools::canRemoveOrRename(desktop(), anObjects))
1415 DocumentPtr anActiveDocument = aMgr->activeDocument();
1416 FeaturePtr aCurrentFeature = anActiveDocument->currentFeature(true);
1417 foreach (ObjectPtr aObject, anObjects) {
1418 if (!myModule->canApplyAction(aObject, anActionId))
1421 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1422 if (aFeature.get()) {
1423 anActiveDocument->moveFeature(aFeature, aCurrentFeature);
1424 aCurrentFeature = anActiveDocument->currentFeature(true);
1427 aMgr->finishOperation();
1430 //**************************************************************
1431 void XGUI_Workshop::findReferences(const QObjectPtrList& theList,
1432 std::set<FeaturePtr>& aDirectRefFeatures,
1433 std::set<FeaturePtr>& aIndirectRefFeatures)
1435 foreach (ObjectPtr aDeletedObj, theList) {
1436 std::set<FeaturePtr> alreadyProcessed;
1437 XGUI_Tools::refsToFeatureInAllDocuments(aDeletedObj, aDeletedObj, theList, aDirectRefFeatures,
1438 aIndirectRefFeatures, alreadyProcessed);
1439 std::set<FeaturePtr> aDifference;
1440 std::set_difference(aIndirectRefFeatures.begin(), aIndirectRefFeatures.end(),
1441 aDirectRefFeatures.begin(), aDirectRefFeatures.end(),
1442 std::inserter(aDifference, aDifference.begin()));
1443 aIndirectRefFeatures = aDifference;
1447 bool XGUI_Workshop::isDeleteFeatureWithReferences(const QObjectPtrList& theList,
1448 const std::set<FeaturePtr>& aDirectRefFeatures,
1449 const std::set<FeaturePtr>& aIndirectRefFeatures,
1451 bool& doDeleteReferences)
1453 doDeleteReferences = true;
1455 QString aDirectNames, aIndirectNames;
1456 if (!aDirectRefFeatures.empty()) {
1457 QStringList aDirectRefNames;
1458 foreach (const FeaturePtr& aFeature, aDirectRefFeatures)
1459 aDirectRefNames.append(aFeature->name().c_str());
1460 aDirectNames = aDirectRefNames.join(", ");
1462 QStringList aIndirectRefNames;
1463 foreach (const FeaturePtr& aFeature, aIndirectRefFeatures)
1464 aIndirectRefNames.append(aFeature->name().c_str());
1465 aIndirectNames = aIndirectRefNames.join(", ");
1468 bool aCanReplaceParameters = !aDirectRefFeatures.empty();
1469 QStringList aPartFeatureNames;
1470 foreach (ObjectPtr aObj, theList) {
1471 FeaturePtr aFeature = ModelAPI_Feature::feature(aObj);
1472 // invalid feature data means that the feature is already removed in model,
1473 // we needn't process it. E.g. delete of feature from create operation. The operation abort
1474 // will delete the operation
1475 if (!aFeature->data()->isValid())
1477 ResultPtr aFirstResult = aFeature->firstResult();
1478 if (!aFirstResult.get())
1480 std::string aResultGroupName = aFirstResult->groupName();
1481 if (aResultGroupName == ModelAPI_ResultPart::group())
1482 aPartFeatureNames.append(aFeature->name().c_str());
1484 if (aCanReplaceParameters && aResultGroupName != ModelAPI_ResultParameter::group())
1485 aCanReplaceParameters = false;
1487 QString aPartNames = aPartFeatureNames.join(", ");
1489 QMessageBox aMessageBox(theParent);
1490 aMessageBox.setWindowTitle(tr("Delete features"));
1491 aMessageBox.setIcon(QMessageBox::Warning);
1492 aMessageBox.setStandardButtons(QMessageBox::No | QMessageBox::Yes);
1493 aMessageBox.setDefaultButton(QMessageBox::No);
1496 if (!aDirectNames.isEmpty() || !aIndirectNames.isEmpty()) {
1497 if (aCanReplaceParameters) {
1498 aText = QString(tr("Selected parameters are used in the following features: %1.\nThese features will be deleted.\nOr parameters could be replaced by their values.\n")
1499 .arg(aDirectNames));
1500 if (!aIndirectNames.isEmpty())
1501 aText += QString(tr("(Also these features will be deleted: %1)\n")).arg(aIndirectNames);
1502 QPushButton *aReplaceButton = aMessageBox.addButton(tr("Replace"), QMessageBox::ActionRole);
1504 aText = QString(tr("Selected features are used in the following features: %1.\nThese features will be deleted.\n")).arg(aDirectNames);
1505 if (!aIndirectNames.isEmpty())
1506 aText += QString(tr("(Also these features will be deleted: %1)\n")).arg(aIndirectNames);
1509 if (!aPartNames.isEmpty())
1510 aText += QString(tr("The following parts will be deleted: %1.\n")).arg(aPartNames);
1512 if (!aText.isEmpty()) {
1513 aText += "Would you like to continue?";
1514 aMessageBox.setText(aText);
1516 QMessageBox::ButtonRole aButtonRole = aMessageBox.buttonRole(aMessageBox.clickedButton());
1518 if (aButtonRole == QMessageBox::NoRole)
1521 if (aButtonRole == QMessageBox::ActionRole) {
1522 foreach (ObjectPtr aObj, theList)
1523 ModelAPI_ReplaceParameterMessage::send(aObj, this);
1524 doDeleteReferences = false;
1530 bool XGUI_Workshop::deleteFeatures(const QObjectPtrList& theFeatures,
1531 const std::set<FeaturePtr>& theIgnoredFeatures)
1533 std::set<FeaturePtr> aDirectRefFeatures, aIndirectRefFeatures;
1534 findReferences(theFeatures, aDirectRefFeatures, aIndirectRefFeatures);
1535 return deleteFeaturesInternal(theFeatures, aDirectRefFeatures, aIndirectRefFeatures,
1536 theIgnoredFeatures);
1539 bool XGUI_Workshop::deleteFeaturesInternal(const QObjectPtrList& theList,
1540 const std::set<FeaturePtr>& aDirectRefFeatures,
1541 const std::set<FeaturePtr>& aIndirectRefFeatures,
1542 const std::set<FeaturePtr>& theIgnoredFeatures,
1543 const bool doDeleteReferences)
1545 if (doDeleteReferences) {
1546 std::set<FeaturePtr> aFeaturesToDelete = aDirectRefFeatures;
1547 aFeaturesToDelete.insert(aIndirectRefFeatures.begin(), aIndirectRefFeatures.end());
1548 std::set<FeaturePtr>::const_iterator anIt = aFeaturesToDelete.begin(),
1549 aLast = aFeaturesToDelete.end();
1553 for (; anIt != aLast; anIt++) {
1554 FeaturePtr aFeature = (*anIt);
1555 DocumentPtr aDoc = aFeature->document();
1556 if (theIgnoredFeatures.find(aFeature) == theIgnoredFeatures.end()) {
1557 aDoc->removeFeature(aFeature);
1559 anInfo.append(ModuleBase_Tools::objectInfo(aFeature).toStdString().c_str());
1564 qDebug(QString("remove references:%1").arg(anInfo.join("; ")).toStdString().c_str());
1569 QString anActionId = "DELETE_CMD";
1570 return removeFeatures(theList, theIgnoredFeatures, anActionId);
1573 //**************************************************************
1574 bool XGUI_Workshop::removeFeatures(const QObjectPtrList& theList,
1575 const std::set<FeaturePtr>& theIgnoredFeatures,
1576 const QString& theActionId)
1578 bool isDone = false;
1580 QString anId = QString::fromStdString(theActionId.toStdString().c_str());
1581 QStringList anObjectGroups = contextMenuMgr()->actionObjectGroups(anId);
1582 // 4. remove the parameter features
1583 foreach (ObjectPtr aObj, theList) {
1584 // features and parameters can be removed here,
1585 // the results are removed only by a corresponded feature remove
1586 std::string aGroupName = aObj->groupName();
1587 if (!anObjectGroups.contains(aGroupName.c_str()))
1590 FeaturePtr aFeature = ModelAPI_Feature::feature(aObj);
1592 /*// TODO: to learn the workshop to delegate the Part object deletion to the PartSet module
1593 // part features are removed in the PartSet module. This condition should be moved there
1594 if (aFeature->getKind() == "Part")
1597 DocumentPtr aDoc = aObj->document();
1598 if (theIgnoredFeatures.find(aFeature) == theIgnoredFeatures.end()) {
1600 QString anInfoStr = ModuleBase_Tools::objectInfo(aFeature);
1601 anInfo.append(anInfoStr);
1602 qDebug(QString("remove feature :%1").arg(anInfoStr).toStdString().c_str());
1604 aDoc->removeFeature(aFeature);
1610 qDebug(QString("remove features:%1").arg(anInfo.join("; ")).toStdString().c_str());
1615 bool hasResults(QObjectPtrList theObjects, const std::set<std::string>& theTypes)
1617 bool isFoundResultType = false;
1618 foreach(ObjectPtr anObj, theObjects)
1620 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObj);
1621 if (aResult.get() == NULL)
1624 isFoundResultType = theTypes.find(aResult->groupName()) != theTypes.end();
1625 if (isFoundResultType)
1628 return isFoundResultType;
1631 //**************************************************************
1632 // Returns the list of all features for theDocument and all features of
1633 // all nested parts.
1634 std::list<FeaturePtr> allFeatures(const DocumentPtr& theDocument)
1636 std::list<FeaturePtr> aResultList;
1637 std::list<FeaturePtr> anAllFeatures = theDocument->allFeatures();
1638 foreach (const FeaturePtr& aFeature, anAllFeatures) {
1639 // The order of appending features of the part and the part itself is important
1641 // Append features from a part feature
1642 foreach (const ResultPtr& aResult, aFeature->results()) {
1643 ResultPartPtr aResultPart =
1644 std::dynamic_pointer_cast<ModelAPI_ResultPart>(aResult);
1645 if (aResultPart.get() && aResultPart->partDoc().get()) {
1647 std::list<FeaturePtr> anAllFeatures = allFeatures(aResultPart->partDoc());
1648 aResultList.insert(aResultList.end(), anAllFeatures.begin(), anAllFeatures.end());
1652 aResultList.push_back(aFeature);
1657 //**************************************************************
1658 // Returns the list of features placed between theObject and the current feature
1659 // in the same document. Excludes theObject, includes the current feature.
1660 std::list<FeaturePtr> toCurrentFeatures(const ObjectPtr& theObject)
1662 std::list<FeaturePtr> aResult;
1663 DocumentPtr aDocument = theObject->document();
1664 std::list<FeaturePtr> anAllFeatures = allFeatures(aDocument);
1665 // find the object iterator
1666 std::list<FeaturePtr>::iterator aObjectIt = std::find(anAllFeatures.begin(), anAllFeatures.end(), theObject);
1667 if (aObjectIt == anAllFeatures.end())
1669 // find the current feature iterator
1670 std::list<FeaturePtr>::iterator aCurrentIt = std::find(anAllFeatures.begin(), anAllFeatures.end(), aDocument->currentFeature(true));
1671 if (aCurrentIt == anAllFeatures.end())
1673 // check the right order
1674 if (std::distance(aObjectIt, anAllFeatures.end()) <= std::distance(aCurrentIt, anAllFeatures.end()))
1676 // exclude the object
1677 std::advance(aObjectIt, 1);
1678 // include the current feature
1679 std::advance(aCurrentIt, 1);
1680 return std::list<FeaturePtr>(aObjectIt, aCurrentIt);
1683 bool XGUI_Workshop::canMoveFeature()
1685 QString anActionId = "MOVE_CMD";
1687 QObjectPtrList aObjects = mySelector->selection()->selectedObjects();
1688 QObjectPtrList aValidatedObjects;
1689 foreach (ObjectPtr aObject, aObjects) {
1690 if (!myModule->canApplyAction(aObject, anActionId))
1692 // To be moved feature should be in active document
1693 if (aObject->document() != ModelAPI_Session::get()->activeDocument())
1695 aValidatedObjects.append(aObject);
1697 if (aValidatedObjects.size() != aObjects.size())
1698 aObjects = aValidatedObjects;
1700 bool aCanMove = !aObjects.empty();
1702 QObjectPtrList::const_iterator anIt = aObjects.begin(), aLast = aObjects.end();
1703 for (; anIt != aLast && aCanMove; anIt++) {
1704 ObjectPtr aObject = *anIt;
1705 // 1. Get features placed between selected and current in the document
1706 std::list<FeaturePtr> aFeaturesBetween = toCurrentFeatures(aObject);
1707 // if aFeaturesBetween is empty it means wrong order or aObject is the current feature
1708 if (aFeaturesBetween.empty())
1711 std::set<FeaturePtr> aPlacedFeatures(aFeaturesBetween.begin(), aFeaturesBetween.end());
1712 // 2. Get all reference features to the selected object in the document
1713 std::set<FeaturePtr> aRefFeatures;
1714 XGUI_Tools::refsToFeatureInFeatureDocument(aObject, aRefFeatures);
1716 if (aRefFeatures.empty())
1719 // 3. Find any placed features in all reference features
1720 std::set<FeaturePtr> aIntersectionFeatures;
1721 std::set_intersection(aRefFeatures.begin(), aRefFeatures.end(),
1722 aPlacedFeatures.begin(), aPlacedFeatures.end(),
1723 std::inserter(aIntersectionFeatures, aIntersectionFeatures.begin()));
1724 // 4. Return false if any reference feature is placed before current feature
1725 if (!aIntersectionFeatures.empty())
1733 //**************************************************************
1734 bool XGUI_Workshop::canBeShaded(const ObjectPtr& theObject) const
1736 bool aCanBeShaded = myDisplayer->canBeShaded(theObject);
1737 if (!aCanBeShaded) {
1738 ResultCompSolidPtr aCompsolidResult =
1739 std::dynamic_pointer_cast<ModelAPI_ResultCompSolid>(theObject);
1740 if (aCompsolidResult.get() != NULL) { // change colors for all sub-solids
1741 for(int i = 0; i < aCompsolidResult->numberOfSubs() && !aCanBeShaded; i++)
1742 aCanBeShaded = myDisplayer->canBeShaded(aCompsolidResult->subResult(i));
1745 return aCanBeShaded;
1748 //**************************************************************
1749 bool XGUI_Workshop::canChangeColor() const
1751 QObjectPtrList aObjects = mySelector->selection()->selectedObjects();
1753 std::set<std::string> aTypes;
1754 aTypes.insert(ModelAPI_ResultGroup::group());
1755 aTypes.insert(ModelAPI_ResultConstruction::group());
1756 aTypes.insert(ModelAPI_ResultBody::group());
1757 aTypes.insert(ModelAPI_ResultPart::group());
1759 return hasResults(aObjects, aTypes);
1762 void setColor(ResultPtr theResult, const std::vector<int>& theColor)
1764 if (!theResult.get())
1767 AttributeIntArrayPtr aColorAttr = theResult->data()->intArray(ModelAPI_Result::COLOR_ID());
1768 if (aColorAttr.get() != NULL) {
1769 if (!aColorAttr->size()) {
1770 aColorAttr->setSize(3);
1772 aColorAttr->setValue(0, theColor[0]);
1773 aColorAttr->setValue(1, theColor[1]);
1774 aColorAttr->setValue(2, theColor[2]);
1778 //**************************************************************
1779 void XGUI_Workshop::changeColor(const QObjectPtrList& theObjects)
1782 AttributeIntArrayPtr aColorAttr;
1783 // 1. find the current color of the object. This is a color of AIS presentation
1784 // The objects are iterated until a first valid color is found
1785 std::vector<int> aColor;
1786 foreach(ObjectPtr anObject, theObjects) {
1787 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObject);
1788 if (aResult.get()) {
1789 XGUI_CustomPrs::getResultColor(aResult, aColor);
1792 // TODO: remove the obtaining a color from the AIS object
1793 // this does not happen never because:
1794 // 1. The color can be changed only on results
1795 // 2. The result can be not visualized in the viewer(e.g. Origin Construction)
1796 AISObjectPtr anAISObj = myDisplayer->getAISObject(anObject);
1797 if (anAISObj.get()) {
1799 anAISObj->getColor(aColor[0], aColor[1], aColor[2]);
1802 if (!aColor.empty())
1805 if (aColor.size() != 3)
1808 if (!abortAllOperations())
1810 // 2. show the dialog to change the value
1811 XGUI_ColorDialog* aDlg = new XGUI_ColorDialog(desktop());
1812 aDlg->setColor(aColor);
1813 aDlg->move(QCursor::pos());
1814 bool isDone = aDlg->exec() == QDialog::Accepted;
1818 bool isRandomColor = aDlg->isRandomColor();
1820 // 3. abort the previous operation and start a new one
1821 SessionPtr aMgr = ModelAPI_Session::get();
1822 QString aDescription = contextMenuMgr()->action("COLOR_CMD")->text();
1823 aMgr->startOperation(aDescription.toStdString());
1825 // 4. set the value to all results
1826 std::vector<int> aColorResult = aDlg->getColor();
1827 foreach(ObjectPtr anObj, theObjects) {
1828 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObj);
1829 if (aResult.get() != NULL) {
1830 ResultCompSolidPtr aCompsolidResult = std::dynamic_pointer_cast<ModelAPI_ResultCompSolid>(aResult);
1831 if (aCompsolidResult.get() != NULL) { // change colors for all sub-solids
1832 for(int i = 0; i < aCompsolidResult->numberOfSubs(); i++) {
1833 setColor(aCompsolidResult->subResult(i), !isRandomColor ? aColorResult : aDlg->getRandomColor());
1836 setColor(aResult, !isRandomColor ? aColorResult : aDlg->getRandomColor());
1839 aMgr->finishOperation();
1840 updateCommandStatus();
1843 //**************************************************************
1844 #define SET_DISPLAY_GROUP(aGroupName, aDisplay) \
1845 for (int i = 0; i < aDoc->size(aGroupName); i++) { \
1846 aDoc->object(aGroupName, i)->setDisplayed(aDisplay); \
1848 void XGUI_Workshop::showObjects(const QObjectPtrList& theList, bool isVisible)
1850 foreach (ObjectPtr aObj, theList) {
1852 ResultPartPtr aPartRes = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1854 DocumentPtr aDoc = aPartRes->partDoc();
1855 SET_DISPLAY_GROUP(ModelAPI_ResultBody::group(), isVisible)
1856 SET_DISPLAY_GROUP(ModelAPI_ResultConstruction::group(), isVisible)
1857 SET_DISPLAY_GROUP(ModelAPI_ResultGroup::group(), isVisible)
1860 aObj->setDisplayed(isVisible);
1863 Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
1866 //**************************************************************
1867 void XGUI_Workshop::showOnlyObjects(const QObjectPtrList& theList)
1869 // Hide all displayed objects
1870 QObjectPtrList aList = myDisplayer->displayedObjects();
1871 foreach (ObjectPtr aObj, aList) {
1872 if (module()->canEraseObject(aObj))
1873 aObj->setDisplayed(false);
1876 // Show only objects from the list
1877 foreach (ObjectPtr aObj, theList) {
1879 ResultPartPtr aPartRes = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1881 DocumentPtr aDoc = aPartRes->partDoc();
1882 SET_DISPLAY_GROUP(ModelAPI_ResultBody::group(), true)
1883 SET_DISPLAY_GROUP(ModelAPI_ResultConstruction::group(), true)
1884 SET_DISPLAY_GROUP(ModelAPI_ResultGroup::group(), true)
1887 aObj->setDisplayed(true);
1890 Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
1895 //**************************************************************
1896 void XGUI_Workshop::registerValidators() const
1898 SessionPtr aMgr = ModelAPI_Session::get();
1899 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
1902 //**************************************************************
1903 void XGUI_Workshop::displayDocumentResults(DocumentPtr theDoc)
1907 displayGroupResults(theDoc, ModelAPI_ResultConstruction::group());
1908 displayGroupResults(theDoc, ModelAPI_ResultBody::group());
1911 //**************************************************************
1912 void XGUI_Workshop::displayGroupResults(DocumentPtr theDoc, std::string theGroup)
1914 for (int i = 0; i < theDoc->size(theGroup); i++)
1915 theDoc->object(theGroup, i)->setDisplayed(true);
1916 //displayObject(theDoc->object(theGroup, i));
1917 Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
1920 //**************************************************************
1921 void XGUI_Workshop::setDisplayMode(const QObjectPtrList& theList, int theMode)
1923 foreach(ObjectPtr aObj, theList) {
1924 myDisplayer->setDisplayMode(aObj, (XGUI_Displayer::DisplayMode)theMode, false);
1926 ResultCompSolidPtr aCompsolidResult = std::dynamic_pointer_cast<ModelAPI_ResultCompSolid>(aObj);
1927 if (aCompsolidResult.get() != NULL) { // change colors for all sub-solids
1928 for(int i = 0; i < aCompsolidResult->numberOfSubs(); i++) {
1929 myDisplayer->setDisplayMode(aCompsolidResult->subResult(i),
1930 (XGUI_Displayer::DisplayMode)theMode, false);
1934 if (theList.size() > 0)
1935 myDisplayer->updateViewer();
1938 //**************************************************************
1939 void XGUI_Workshop::closeDocument()
1941 ModuleBase_Operation* anOperation = operationMgr()->currentOperation();
1942 while (anOperation) {
1943 anOperation->abort();
1944 anOperation = operationMgr()->currentOperation();
1946 myDisplayer->closeLocalContexts();
1947 myDisplayer->eraseAll();
1948 objectBrowser()->clearContent();
1950 module()->closeDocument();
1952 SessionPtr aMgr = ModelAPI_Session::get();
1956 void XGUI_Workshop::addHistoryMenu(QObject* theObject, const char* theSignal, const char* theSlot)
1958 XGUI_HistoryMenu* aMenu = NULL;
1959 if (isSalomeMode()) {
1960 QAction* anAction = qobject_cast<QAction*>(theObject);
1963 aMenu = new XGUI_HistoryMenu(anAction);
1965 QToolButton* aButton = qobject_cast<QToolButton*>(theObject);
1966 aMenu = new XGUI_HistoryMenu(aButton);
1968 connect(this, theSignal, aMenu, SLOT(setHistory(const QList<ActionInfo>&)));
1969 connect(aMenu, SIGNAL(actionSelected(int)), this, theSlot);
1972 QList<ActionInfo> XGUI_Workshop::processHistoryList(const std::list<std::string>& theList) const
1974 QList<ActionInfo> aResult;
1975 std::list<std::string>::const_iterator it = theList.cbegin();
1976 for (; it != theList.cend(); it++) {
1977 QString anId = QString::fromStdString(*it);
1978 bool isEditing = anId.endsWith(ModuleBase_OperationFeature::EditSuffix());
1980 anId.chop(ModuleBase_OperationFeature::EditSuffix().size());
1983 QAction* aContextMenuAct = myContextMenuMgr->actionByName(anId);
1984 if (aContextMenuAct) {
1985 anInfo.initFrom(aContextMenuAct);
1987 anInfo = myActionsMgr->actionInfoById(anId);
1990 anInfo.text = anInfo.text.prepend("Modify ");
1997 void XGUI_Workshop::synchronizeViewer()
1999 SessionPtr aMgr = ModelAPI_Session::get();
2000 DocumentPtr aDoc = aMgr->activeDocument();
2002 synchronizeGroupInViewer(aDoc, ModelAPI_ResultConstruction::group(), false);
2003 synchronizeGroupInViewer(aDoc, ModelAPI_ResultBody::group(), false);
2004 synchronizeGroupInViewer(aDoc, ModelAPI_ResultPart::group(), false);
2005 synchronizeGroupInViewer(aDoc, ModelAPI_ResultGroup::group(), false);
2008 void XGUI_Workshop::synchronizeGroupInViewer(const DocumentPtr& theDoc,
2009 const std::string& theGroup,
2010 bool theUpdateViewer)
2013 int aSize = theDoc->size(theGroup);
2014 for (int i = 0; i < aSize; i++) {
2015 aObj = theDoc->object(theGroup, i);
2016 if (aObj->isDisplayed()) {
2017 // Hide the presentation with an empty shape. But isDisplayed state of the object should not
2018 // be changed to the object becomes visible when the shape becomes not empty
2019 ResultPtr aRes = std::dynamic_pointer_cast<ModelAPI_Result>(aObj);
2020 if (aRes.get() && (!aRes->shape().get() || aRes->shape()->isNull()))
2022 myDisplayer->display(aObj, false);
2025 if (theUpdateViewer)
2026 myDisplayer->updateViewer();
2029 void XGUI_Workshop::highlightResults(const QObjectPtrList& theObjects)
2031 FeaturePtr aFeature;
2032 QObjectPtrList aSelList = theObjects;
2033 std::list<ResultPtr> aResList;
2034 foreach(ObjectPtr aObj, theObjects) {
2035 aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
2036 if (aFeature.get()) {
2037 aResList = aFeature->results();
2038 std::list<std::shared_ptr<ModelAPI_Result> >::const_iterator aIt;
2039 for(aIt = aResList.cbegin(); aIt != aResList.cend(); aIt++) {
2040 aSelList.append(*aIt);
2044 if (aSelList.count() > theObjects.count()) {
2045 // if something was found
2046 bool aBlocked = objectBrowser()->blockSignals(true);
2047 objectBrowser()->setObjectsSelected(aSelList);
2048 objectBrowser()->blockSignals(aBlocked);