1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D -->
3 //#include "XGUI_Constants.h"
4 #include "XGUI_Workshop.h"
6 #include "XGUI_ActionsMgr.h"
7 #include "XGUI_ColorDialog.h"
8 #include "XGUI_ContextMenuMgr.h"
9 #include "XGUI_Displayer.h"
10 #include "XGUI_ErrorDialog.h"
11 #include "XGUI_ErrorMgr.h"
12 #include "XGUI_ModuleConnector.h"
13 #include "XGUI_ObjectsBrowser.h"
14 #include "XGUI_OperationMgr.h"
15 #include "XGUI_PropertyPanel.h"
16 #include "XGUI_SalomeConnector.h"
17 #include "XGUI_Selection.h"
18 #include "XGUI_SelectionMgr.h"
19 #include "XGUI_Tools.h"
20 #include "XGUI_ViewerProxy.h"
21 #include "XGUI_WorkshopListener.h"
22 #include <XGUI_CustomPrs.h>
23 #include <XGUI_HistoryMenu.h>
24 #include <XGUI_QtEvents.h>
26 #include <AppElements_Button.h>
27 #include <AppElements_Command.h>
28 #include <AppElements_MainMenu.h>
29 #include <AppElements_MainWindow.h>
30 #include <AppElements_MenuGroupPanel.h>
31 #include <AppElements_Viewer.h>
32 #include <AppElements_Workbench.h>
34 #include <ModelAPI_AttributeDocRef.h>
35 #include <ModelAPI_AttributeIntArray.h>
36 #include <ModelAPI_Data.h>
37 #include <ModelAPI_Events.h>
38 #include <ModelAPI_Feature.h>
39 #include <ModelAPI_Object.h>
40 #include <ModelAPI_ResultBody.h>
41 #include <ModelAPI_ResultConstruction.h>
42 #include <ModelAPI_ResultGroup.h>
43 #include <ModelAPI_ResultParameter.h>
44 #include <ModelAPI_Session.h>
45 #include <ModelAPI_Validator.h>
46 #include <ModelAPI_ResultCompSolid.h>
47 #include <ModelAPI_Tools.h>
49 //#include <PartSetPlugin_Part.h>
51 #include <Events_Loop.h>
52 #include <Events_Error.h>
53 #include <Events_LongOp.h>
55 #include <ModuleBase_FilterFactory.h>
56 #include <ModuleBase_IModule.h>
57 #include <ModuleBase_IViewer.h>
58 #include <ModuleBase_Operation.h>
59 #include <ModuleBase_OperationDescription.h>
60 #include <ModuleBase_PageBase.h>
61 #include <ModuleBase_Preferences.h>
62 #include <ModuleBase_SelectionValidator.h>
63 #include <ModuleBase_Tools.h>
64 #include <ModuleBase_WidgetFactory.h>
65 #include <ModuleBase_OperationFeature.h>
66 #include <ModuleBase_OperationAction.h>
68 #include <Config_Common.h>
69 #include <Config_FeatureMessage.h>
70 #include <Config_ModuleReader.h>
71 #include <Config_PointerMessage.h>
72 #include <Config_PropManager.h>
73 #include <Config_SelectionFilterMessage.h>
75 #include <SUIT_ResourceMgr.h>
77 #include <QApplication>
78 #include <QFileDialog>
79 #include <QMessageBox>
80 #include <QMdiSubWindow>
81 #include <QPushButton>
82 #include <QDockWidget>
87 #include <QToolButton>
89 #include <QDesktopWidget>
104 //#define DEBUG_DELETE
106 XGUI_Workshop::XGUI_Workshop(XGUI_SalomeConnector* theConnector)
108 myCurrentDir(QString()),
110 mySalomeConnector(theConnector),
115 myMainWindow = mySalomeConnector ? 0 : new AppElements_MainWindow();
118 SUIT_ResourceMgr* aResMgr = ModuleBase_Preferences::resourceMgr();
119 bool aCloc = aResMgr->booleanValue("language", "locale", true);
121 QLocale::setDefault( QLocale::c() );
123 QLocale::setDefault( QLocale::system() );
126 myDisplayer = new XGUI_Displayer(this);
128 mySelector = new XGUI_SelectionMgr(this);
129 //connect(mySelector, SIGNAL(selectionChanged()), this, SLOT(updateModuleCommands()));
131 myOperationMgr = new XGUI_OperationMgr(this, 0);
132 myActionsMgr = new XGUI_ActionsMgr(this);
133 myErrorDlg = new XGUI_ErrorDialog(QApplication::desktop());
134 myContextMenuMgr = new XGUI_ContextMenuMgr(this);
135 connect(myContextMenuMgr, SIGNAL(actionTriggered(const QString&, bool)), this,
136 SLOT(onContextMenuCommand(const QString&, bool)));
138 myViewerProxy = new XGUI_ViewerProxy(this);
139 connect(myViewerProxy, SIGNAL(selectionChanged()),
140 myActionsMgr, SLOT(updateOnViewSelection()));
142 myModuleConnector = new XGUI_ModuleConnector(this);
144 ModuleBase_IWorkshop* aWorkshop = moduleConnector();
145 myOperationMgr->setWorkshop(aWorkshop);
147 myErrorMgr = new XGUI_ErrorMgr(this, aWorkshop);
148 myEventsListener = new XGUI_WorkshopListener(aWorkshop);
150 connect(myOperationMgr, SIGNAL(operationStarted(ModuleBase_Operation*)),
151 SLOT(onOperationStarted(ModuleBase_Operation*)));
152 connect(myOperationMgr, SIGNAL(operationResumed(ModuleBase_Operation*)),
153 SLOT(onOperationResumed(ModuleBase_Operation*)));
154 connect(myOperationMgr, SIGNAL(operationStopped(ModuleBase_Operation*)),
155 SLOT(onOperationStopped(ModuleBase_Operation*)));
156 connect(myOperationMgr, SIGNAL(operationCommitted(ModuleBase_Operation*)),
157 SLOT(onOperationCommitted(ModuleBase_Operation*)));
158 connect(myOperationMgr, SIGNAL(operationAborted(ModuleBase_Operation*)),
159 SLOT(onOperationAborted(ModuleBase_Operation*)));
160 //connect(myOperationMgr, SIGNAL(validationStateChanged(bool)),
161 // myErrorMgr, SLOT(onValidationStateChanged()));
164 connect(myMainWindow, SIGNAL(exitKeySequence()), SLOT(onExit()));
165 connect(this, SIGNAL(errorOccurred(const QString&)), myErrorDlg, SLOT(addError(const QString&)));
166 connect(myEventsListener, SIGNAL(errorOccurred(const QString&)),
167 myErrorDlg, SLOT(addError(const QString&)));
169 //Config_PropManager::registerProp("Visualization", "object_default_color", "Object color",
170 // Config_Prop::Color, "225,225,225");
172 Config_PropManager::registerProp("Visualization", "result_body_color", "Body color",
173 Config_Prop::Color, ModelAPI_ResultBody::DEFAULT_COLOR());
174 Config_PropManager::registerProp("Visualization", "result_group_color", "Group color",
175 Config_Prop::Color, ModelAPI_ResultGroup::DEFAULT_COLOR());
176 Config_PropManager::registerProp("Visualization", "result_construction_color", "Construction color",
177 Config_Prop::Color, ModelAPI_ResultConstruction::DEFAULT_COLOR());
178 Config_PropManager::registerProp("Visualization", "result_part_color", "Part color",
179 Config_Prop::Color, ModelAPI_ResultPart::DEFAULT_COLOR());
182 //******************************************************
183 XGUI_Workshop::~XGUI_Workshop(void)
188 //******************************************************
189 void XGUI_Workshop::startApplication()
193 Config_PropManager::registerProp("Plugins", "default_path", "Default Path",
194 Config_Prop::Directory, "");
196 //Initialize event listening
197 myEventsListener->initializeEventListening();
199 registerValidators();
201 // Calling of loadCustomProps before activating module is required
202 // by Config_PropManger to restore user-defined path to plugins
203 ModuleBase_Preferences::loadCustomProps();
206 myMainWindow->show();
207 updateCommandStatus();
212 emit applicationStarted();
215 void XGUI_Workshop::activateModule()
217 myModule->activateSelectionFilters();
219 connect(myDisplayer, SIGNAL(objectDisplayed(ObjectPtr, AISObjectPtr)),
220 myModule, SLOT(onObjectDisplayed(ObjectPtr, AISObjectPtr)));
221 connect(myDisplayer, SIGNAL(beforeObjectErase(ObjectPtr, AISObjectPtr)),
222 myModule, SLOT(onBeforeObjectErase(ObjectPtr, AISObjectPtr)));
224 myActionsMgr->update();
226 // activate visualized objects in the viewer
227 XGUI_Displayer* aDisplayer = displayer();
228 QObjectPtrList aDisplayed = aDisplayer->displayedObjects();
230 module()->activeSelectionModes(aModes);
231 aDisplayer->activateObjects(aModes, aDisplayed);
234 void XGUI_Workshop::deactivateModule()
236 myModule->deactivateSelectionFilters();
238 // remove internal displayer filter
239 displayer()->deactivateSelectionFilters();
241 disconnect(myDisplayer, SIGNAL(objectDisplayed(ObjectPtr, AISObjectPtr)),
242 myModule, SLOT(onObjectDisplayed(ObjectPtr, AISObjectPtr)));
243 disconnect(myDisplayer, SIGNAL(beforeObjectErase(ObjectPtr, AISObjectPtr)),
244 myModule, SLOT(onBeforeObjectErase(ObjectPtr, AISObjectPtr)));
246 XGUI_Displayer* aDisplayer = displayer();
247 QObjectPtrList aDisplayed = aDisplayer->displayedObjects();
248 aDisplayer->deactivateObjects(aDisplayed, true);
251 //******************************************************
252 void XGUI_Workshop::initMenu()
254 myContextMenuMgr->createActions();
256 if (isSalomeMode()) {
257 // Create only Undo, Redo commands
258 QAction* aAction = salomeConnector()->addDesktopCommand("UNDO_CMD", tr("Undo"),
259 tr("Undo last command"),
260 QIcon(":pictures/undo.png"),
261 QKeySequence::Undo, false, "MEN_DESK_EDIT");
262 QString aToolBarTitle = tr( "INF_DESK_TOOLBAR_STANDARD" );
263 salomeConnector()->addActionInToolbar( aAction,aToolBarTitle );
265 connect(aAction, SIGNAL(triggered(bool)), this, SLOT(onUndo()));
266 addHistoryMenu(aAction, SIGNAL(updateUndoHistory(const QList<ActionInfo>&)), SLOT(onUndo(int)));
268 aAction = salomeConnector()->addDesktopCommand("REDO_CMD", tr("Redo"), tr("Redo last command"),
269 QIcon(":pictures/redo.png"), QKeySequence::Redo,
270 false, "MEN_DESK_EDIT");
271 salomeConnector()->addActionInToolbar( aAction, aToolBarTitle );
273 connect(aAction, SIGNAL(triggered(bool)), this, SLOT(onRedo()));
274 addHistoryMenu(aAction, SIGNAL(updateRedoHistory(const QList<ActionInfo>&)), SLOT(onRedo(int)));
276 salomeConnector()->addDesktopMenuSeparator("MEN_DESK_EDIT");
277 aAction = salomeConnector()->addDesktopCommand("REBUILD_CMD", tr("Rebuild"), tr("Rebuild data objects"),
278 QIcon(":pictures/rebuild.png"), QKeySequence(),
279 false, "MEN_DESK_EDIT");
280 salomeConnector()->addActionInToolbar( aAction, aToolBarTitle );
282 connect(aAction, SIGNAL(triggered(bool)), this, SLOT(onRebuild()));
283 salomeConnector()->addDesktopMenuSeparator("MEN_DESK_EDIT");
285 aAction = salomeConnector()->addDesktopCommand("SAVEAS_CMD", tr("Export NewGeom..."), tr("Export the current document into a NewGeom file"),
286 QIcon(), QKeySequence(),
287 false, "MEN_DESK_FILE");
288 connect(aAction, SIGNAL(triggered(bool)), this, SLOT(onSaveAs()));
290 aAction = salomeConnector()->addDesktopCommand("OPEN_CMD", tr("Import NewGeom..."), tr("Import a NewGeom file"),
291 QIcon(), QKeySequence(),
292 false, "MEN_DESK_FILE");
293 connect(aAction, SIGNAL(triggered(bool)), this, SLOT(onOpen()));
294 salomeConnector()->addDesktopMenuSeparator("MEN_DESK_FILE");
298 // File commands group
299 AppElements_MenuGroupPanel* aGroup = myMainWindow->menuObject()->generalPage();
301 AppElements_Command* aCommand;
303 aCommand = aGroup->addFeature("SAVE_CMD", tr("Save"), tr("Save the document"),
304 QIcon(":pictures/save.png"), QKeySequence::Save);
305 aCommand->connectTo(this, SLOT(onSave()));
306 //aCommand->disable();
308 QString aUndoId = "UNDO_CMD";
309 aCommand = aGroup->addFeature(aUndoId, tr("Undo"), tr("Undo last command"),
310 QIcon(":pictures/undo.png"), QKeySequence::Undo);
311 aCommand->connectTo(this, SLOT(onUndo()));
312 AppElements_Button* aUndoButton = qobject_cast<AppElements_Button*>(aGroup->widget(aUndoId));
313 addHistoryMenu(aUndoButton,
314 SIGNAL(updateUndoHistory(const QList<ActionInfo>&)),
317 QString aRedoId = "REDO_CMD";
318 aCommand = aGroup->addFeature(aRedoId, tr("Redo"), tr("Redo last command"),
319 QIcon(":pictures/redo.png"), QKeySequence::Redo);
320 aCommand->connectTo(this, SLOT(onRedo()));
321 AppElements_Button* aRedoButton = qobject_cast<AppElements_Button*>(aGroup->widget(aRedoId));
322 addHistoryMenu(aRedoButton,
323 SIGNAL(updateRedoHistory(const QList<ActionInfo>&)),
326 aCommand = aGroup->addFeature("REBUILD_CMD", tr("Rebuild"), tr("Rebuild data objects"),
327 QIcon(":pictures/rebuild.png"), QKeySequence());
328 aCommand->connectTo(this, SLOT(onRebuild()));
330 aCommand = aGroup->addFeature("SAVEAS_CMD", tr("Save as..."), tr("Save the document into a file"),
331 QIcon(":pictures/save.png"), QKeySequence());
332 aCommand->connectTo(this, SLOT(onSaveAs()));
333 //aCommand->disable();
335 aCommand = aGroup->addFeature("OPEN_CMD", tr("Open..."), tr("Open a new document"),
336 QIcon(":pictures/open.png"), QKeySequence::Open);
337 aCommand->connectTo(this, SLOT(onOpen()));
339 //aCommand = aGroup->addFeature("NEW_CMD", tr("New"), tr("Create a new document"),
340 // QIcon(":pictures/new.png"), QKeySequence::New);
341 //aCommand->connectTo(this, SLOT(onNew()));
343 aCommand = aGroup->addFeature("PREF_CMD", tr("Preferences"), tr("Edit preferences"),
344 QIcon(":pictures/preferences.png"), QKeySequence::Preferences);
345 aCommand->connectTo(this, SLOT(onPreferences()));
347 aCommand = aGroup->addFeature("EXIT_CMD", tr("Exit"), tr("Exit application"),
348 QIcon(":pictures/close.png"), QKeySequence::Close);
349 aCommand->connectTo(this, SLOT(onExit()));
350 //FIXME: SBH's test action. Can be used for some GUI tests.
352 // aCommand = aGroup->addFeature("TEST_CMD", "Test!", "Private debug button",
353 // QIcon(":pictures/close.png"), QKeySequence(), true);
354 // aCommand->connectTo(myMainWindow, SLOT(dockPythonConsole()));
358 //******************************************************
359 AppElements_Workbench* XGUI_Workshop::addWorkbench(const QString& theName)
361 AppElements_MainMenu* aMenuBar = myMainWindow->menuObject();
362 return aMenuBar->addWorkbench(theName);
365 //******************************************************
366 QMainWindow* XGUI_Workshop::desktop() const
368 return isSalomeMode() ? salomeConnector()->desktop() : myMainWindow;
371 //******************************************************
372 void XGUI_Workshop::onStartWaiting()
374 if (Events_LongOp::isPerformed()) {
375 QApplication::setOverrideCursor(QCursor(Qt::WaitCursor));
379 //******************************************************
380 void XGUI_Workshop::onAcceptActionClicked()
382 QAction* anAction = dynamic_cast<QAction*>(sender());
383 XGUI_OperationMgr* anOperationMgr = operationMgr();
384 if (anOperationMgr) {
385 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
386 (anOperationMgr->currentOperation());
388 if (errorMgr()->canProcessClick(anAction, aFOperation->feature()))
389 myOperationMgr->onCommitOperation();
394 //******************************************************
395 /*void XGUI_Workshop::onValidationStateChanged(bool theEnabled)
397 XGUI_OperationMgr* anOperationMgr = operationMgr();
398 if (anOperationMgr) {
399 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
400 (anOperationMgr->currentOperation());
402 QAction* anAction = myActionsMgr->operationStateAction(XGUI_ActionsMgr::Accept);
403 myErrorMgr->updateActionState(anAction, aFOperation->feature(), theEnabled);
409 //******************************************************
410 void XGUI_Workshop::deactivateActiveObject(const ObjectPtr& theObject, const bool theUpdateViewer)
412 if (!myModule->canActivateSelection(theObject)) {
413 if (myDisplayer->isActive(theObject)) {
414 QObjectPtrList anObjects;
415 anObjects.append(theObject);
416 myDisplayer->deactivateObjects(anObjects, theUpdateViewer);
421 //******************************************************
422 bool XGUI_Workshop::isFeatureOfNested(const FeaturePtr& theFeature)
424 bool aHasNested = false;
425 std::string aFeatureKind = theFeature->getKind();
426 if (isSalomeMode()) {
427 XGUI_SalomeConnector* aSalomeConnector = salomeConnector();
428 if (aSalomeConnector->isFeatureOfNested(actionsMgr()->action(aFeatureKind.c_str())))
431 AppElements_MainMenu* aMenuBar = mainWindow()->menuObject();
432 AppElements_Command* aCommand = aMenuBar->feature(aFeatureKind.c_str());
433 if (aCommand && aCommand->button()->additionalButtonWidget())
439 //******************************************************
440 void XGUI_Workshop::onOperationStarted(ModuleBase_Operation* theOperation)
442 setGrantedFeatures(theOperation);
444 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
449 if (aFOperation->getDescription()->hasXmlRepresentation()) { //!< No need for property panel
450 setPropertyPanel(aFOperation);
451 // filling the operation values by the current selection
452 // if the operation can be committed after the controls filling, the method perform should
453 // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
454 if (!aFOperation->isEditOperation()) {
455 aFOperation->activateByPreselection();
456 if (operationMgr()->currentOperation() != aFOperation)
460 updateCommandStatus();
462 myModule->onOperationStarted(aFOperation);
464 // the objects of the current operation should be deactivated
465 QObjectPtrList anObjects;
466 FeaturePtr aFeature = aFOperation->feature();
467 anObjects.append(aFeature);
468 std::list<ResultPtr> aResults = aFeature->results();
469 std::list<ResultPtr>::const_iterator aIt;
470 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
471 anObjects.append(*aIt);
473 QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
474 for (; anIt != aLast; anIt++)
475 deactivateActiveObject(*anIt, false);
476 if (anObjects.size() > 0)
477 myDisplayer->updateViewer();
480 //******************************************************
481 void XGUI_Workshop::onOperationResumed(ModuleBase_Operation* theOperation)
483 setGrantedFeatures(theOperation);
485 if (theOperation->getDescription()->hasXmlRepresentation()) { //!< No need for property panel
486 setPropertyPanel(theOperation);
488 updateCommandStatus();
490 myModule->onOperationResumed(theOperation);
494 //******************************************************
495 void XGUI_Workshop::onOperationStopped(ModuleBase_Operation* theOperation)
497 updateCommandStatus();
499 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
504 ModuleBase_ISelection* aSel = mySelector->selection();
505 QObjectPtrList aObj = aSel->selectedPresentations();
506 //!< No need for property panel
508 myPropertyPanel->cleanContent();
510 myModule->onOperationStopped(aFOperation);
512 // the deactivated objects of the current operation should be activated back.
513 // They were deactivated on operation start or an object redisplay
514 QObjectPtrList anObjects;
515 FeaturePtr aFeature = aFOperation->feature();
516 if (aFeature.get()) { // feature may be not created (plugin load fail)
517 if (myDisplayer->isVisible(aFeature) && !myDisplayer->isActive(aFeature))
518 anObjects.append(aFeature);
519 std::list<ResultPtr> aResults = aFeature->results();
520 std::list<ResultPtr>::const_iterator aIt;
521 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
522 ResultPtr anObject = *aIt;
523 if (myDisplayer->isVisible(anObject) && !myDisplayer->isActive(anObject)) {
524 anObjects.append(anObject);
529 module()->activeSelectionModes(aModes);
530 myDisplayer->activateObjects(aModes, anObjects);
534 void XGUI_Workshop::onOperationCommitted(ModuleBase_Operation* theOperation)
536 myModule->onOperationCommitted(theOperation);
539 void XGUI_Workshop::onOperationAborted(ModuleBase_Operation* theOperation)
541 myModule->onOperationAborted(theOperation);
544 void XGUI_Workshop::setGrantedFeatures(ModuleBase_Operation* theOperation)
546 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
550 QStringList aGrantedIds;
552 aGrantedIds = mySalomeConnector->nestedActions(theOperation->id());
554 aGrantedIds = myActionsMgr->nestedCommands(theOperation->id());
556 aFOperation->setGrantedOperationIds(aGrantedIds);
559 void XGUI_Workshop::setPropertyPanel(ModuleBase_Operation* theOperation)
561 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
566 QString aXmlRepr = aFOperation->getDescription()->xmlRepresentation();
567 ModuleBase_WidgetFactory aFactory(aXmlRepr.toStdString(), myModuleConnector);
569 myPropertyPanel->cleanContent();
570 aFactory.createWidget(myPropertyPanel->contentWidget());
572 QList<ModuleBase_ModelWidget*> aWidgets = aFactory.getModelWidgets();
574 // check compatibility of feature and widgets
575 FeaturePtr aFeature = aFOperation->feature();
576 foreach (ModuleBase_ModelWidget* aWidget, aWidgets) {
577 if (!aWidget->attributeID().empty() && !aFeature->attribute(aWidget->attributeID()).get()) {
578 std::string anErrorMsg = "The feature '" + aFeature->getKind() + "' has no attribute '"
579 + aWidget->attributeID() + "' used by widget '"
580 + aWidget->metaObject()->className() + "'.";
581 Events_Error::send(anErrorMsg);
582 myPropertyPanel->cleanContent();
587 foreach (ModuleBase_ModelWidget* aWidget, aWidgets) {
588 bool isStoreValue = !aFOperation->isEditOperation() &&
589 !aWidget->getDefaultValue().empty() &&
590 !aWidget->isComputedDefault();
591 aWidget->setFeature(aFOperation->feature(), isStoreValue);
592 aWidget->enableFocusProcessing();
595 myPropertyPanel->setModelWidgets(aWidgets);
596 aFOperation->setPropertyPanel(myPropertyPanel);
598 myModule->propertyPanelDefined(theOperation);
600 myPropertyPanel->setWindowTitle(theOperation->getDescription()->description());
602 myErrorMgr->setPropertyPanel(myPropertyPanel);
606 * Saves document with given name.
608 void XGUI_Workshop::saveDocument(const QString& theName, std::list<std::string>& theFileNames)
610 QApplication::restoreOverrideCursor();
611 SessionPtr aMgr = ModelAPI_Session::get();
612 aMgr->save(theName.toLatin1().constData(), theFileNames);
613 QApplication::restoreOverrideCursor();
616 bool XGUI_Workshop::abortAllOperations()
618 return myOperationMgr->abortAllOperations();
621 //******************************************************
622 void XGUI_Workshop::onExit()
624 SessionPtr aMgr = ModelAPI_Session::get();
625 if (aMgr->isModified()) {
626 int anAnswer = QMessageBox::question(
627 myMainWindow, tr("Save current file"), tr("The document is modified, save before exit?"),
628 QMessageBox::Save | QMessageBox::Discard | QMessageBox::Cancel, QMessageBox::Cancel);
629 if (anAnswer == QMessageBox::Save) {
630 bool saved = onSave();
634 } else if (anAnswer == QMessageBox::Cancel) {
641 //******************************************************
642 void XGUI_Workshop::onNew()
644 QApplication::setOverrideCursor(Qt::WaitCursor);
645 if (objectBrowser() == 0) {
647 mySelector->connectViewers();
649 myViewerProxy->connectToViewer();
651 if (!isSalomeMode()) {
652 myMainWindow->showPythonConsole();
653 QMdiSubWindow* aWnd = myMainWindow->viewer()->createView();
654 aWnd->showMaximized();
655 updateCommandStatus();
657 myContextMenuMgr->connectViewer();
658 QApplication::restoreOverrideCursor();
661 //******************************************************
662 void XGUI_Workshop::onOpen()
664 if(!abortAllOperations())
666 //save current file before close if modified
667 SessionPtr aSession = ModelAPI_Session::get();
668 if (aSession->isModified()) {
669 //TODO(sbh): re-launch the app?
670 int anAnswer = QMessageBox::question(
671 myMainWindow, tr("Save current file"),
672 tr("The document is modified, save before opening another?"),
673 QMessageBox::Save | QMessageBox::Discard | QMessageBox::Cancel, QMessageBox::Cancel);
674 if (anAnswer == QMessageBox::Save) {
676 } else if (anAnswer == QMessageBox::Cancel) {
682 //show file dialog, check if readable and open
683 myCurrentDir = QFileDialog::getExistingDirectory(mainWindow(), tr("Select directory"));
684 if (myCurrentDir.isEmpty())
686 QFileInfo aFileInfo(myCurrentDir);
687 if (!aFileInfo.exists() || !aFileInfo.isReadable()) {
688 QMessageBox::critical(myMainWindow, tr("Warning"), tr("Unable to open the file."));
692 QApplication::setOverrideCursor(Qt::WaitCursor);
693 aSession->closeAll();
694 aSession->load(myCurrentDir.toLatin1().constData());
695 myObjectBrowser->rebuildDataTree();
696 updateCommandStatus();
697 QApplication::restoreOverrideCursor();
700 //******************************************************
701 bool XGUI_Workshop::onSave()
703 if(!abortAllOperations())
705 if (myCurrentDir.isEmpty()) {
708 std::list<std::string> aFiles;
709 saveDocument(myCurrentDir, aFiles);
710 updateCommandStatus();
712 myMainWindow->setModifiedState(false);
716 //******************************************************
717 bool XGUI_Workshop::onSaveAs()
719 if(!abortAllOperations())
721 QFileDialog dialog(mainWindow());
722 dialog.setWindowTitle(tr("Select directory to save files..."));
723 dialog.setFileMode(QFileDialog::Directory);
724 dialog.setFilter(tr("Directories (*)"));
725 dialog.setOptions(QFileDialog::HideNameFilterDetails | QFileDialog::ShowDirsOnly);
726 dialog.setViewMode(QFileDialog::Detail);
728 if (!dialog.exec()) {
732 QString aTempDir = dialog.selectedFiles().first();
734 if (aDir.exists() && !aDir.entryInfoList(QDir::NoDotAndDotDot | QDir::AllEntries).isEmpty()) {
735 int answer = QMessageBox::question(
737 //: Title of the dialog which asks user if he wants to save study in existing non-empty folder
739 tr("The directory already contains some files, save anyway?"),
740 QMessageBox::Save | QMessageBox::Cancel);
741 if (answer == QMessageBox::Cancel) {
745 myCurrentDir = aTempDir;
746 if (!isSalomeMode()) {
747 myMainWindow->setCurrentDir(myCurrentDir, false);
748 myMainWindow->setModifiedState(false);
753 //******************************************************
754 void XGUI_Workshop::onUndo(int theTimes)
756 objectBrowser()->treeView()->setCurrentIndex(QModelIndex());
757 SessionPtr aMgr = ModelAPI_Session::get();
758 if (aMgr->isOperation()) {
759 /// this is important for nested operrations
760 /// when sketch opeation is active, this condition is false and
761 /// the sketch operation is not aborted
762 operationMgr()->onAbortOperation();
764 for (int i = 0; i < theTimes; ++i) {
768 operationMgr()->updateApplyOfOperations();
769 updateCommandStatus();
772 //******************************************************
773 void XGUI_Workshop::onRedo(int theTimes)
775 // the viewer update should be blocked in order to avoid the features blinking. For the created
776 // feature a results are created, the flush of the created signal caused the viewer redisplay for
777 // each created result. After a redisplay signal is flushed. So, the viewer update is blocked until
778 // redo of all possible objects happens
779 bool isUpdateEnabled = myDisplayer->enableUpdateViewer(false);
781 objectBrowser()->treeView()->setCurrentIndex(QModelIndex());
782 SessionPtr aMgr = ModelAPI_Session::get();
783 if (aMgr->isOperation()) {
784 /// this is important for nested operrations
785 /// when sketch opeation is active, this condition is false and
786 /// the sketch operation is not aborted
787 operationMgr()->onAbortOperation();
789 for (int i = 0; i < theTimes; ++i) {
792 operationMgr()->updateApplyOfOperations();
793 updateCommandStatus();
795 // unblock the viewer update functionality and make update on purpose
796 myDisplayer->enableUpdateViewer(isUpdateEnabled);
797 myDisplayer->updateViewer();
800 //******************************************************
801 void XGUI_Workshop::onRebuild()
803 SessionPtr aMgr = ModelAPI_Session::get();
804 bool aWasOperation = aMgr->isOperation(); // keep this value
805 if (!aWasOperation) {
806 aMgr->startOperation("Rebuild");
808 static const Events_ID aRebuildEvent = Events_Loop::loop()->eventByName("Rebuild");
809 Events_Loop::loop()->send(std::shared_ptr<Events_Message>(
810 new Events_Message(aRebuildEvent, this)));
811 if (!aWasOperation) {
812 aMgr->finishOperation();
814 updateCommandStatus();
817 //******************************************************
818 void XGUI_Workshop::onPreferences()
820 ModuleBase_Prefs aModif;
821 ModuleBase_Preferences::editPreferences(aModif);
822 if (aModif.size() > 0) {
824 foreach (ModuleBase_Pref aPref, aModif)
826 aSection = aPref.first;
827 if (aSection == ModuleBase_Preferences::VIEWER_SECTION) {
829 myMainWindow->viewer()->updateFromResources();
830 } else if (aSection == ModuleBase_Preferences::MENU_SECTION) {
832 myMainWindow->menuObject()->updateFromResources();
835 displayer()->redisplayObjects();
839 //******************************************************
840 ModuleBase_IModule* XGUI_Workshop::loadModule(const QString& theModule)
842 QString libName = QString::fromStdString(library(theModule.toStdString()));
843 if (libName.isEmpty()) {
844 qWarning(qPrintable(tr("Information about module \"%1\" doesn't exist.").arg(theModule)));
849 CREATE_FUNC crtInst = 0;
852 HINSTANCE modLib = ::LoadLibrary((LPTSTR) qPrintable(libName));
856 FORMAT_MESSAGE_ALLOCATE_BUFFER | FORMAT_MESSAGE_FROM_SYSTEM | FORMAT_MESSAGE_IGNORE_INSERTS,
857 0, ::GetLastError(), 0, (LPTSTR) & lpMsgBuf, 0, 0);
858 QString aMsg((char*) &lpMsgBuf);
859 err = QString("Failed to load %1. %2").arg(libName).arg(aMsg);
860 ::LocalFree(lpMsgBuf);
862 crtInst = (CREATE_FUNC) ::GetProcAddress(modLib, CREATE_MODULE);
866 FORMAT_MESSAGE_ALLOCATE_BUFFER | FORMAT_MESSAGE_FROM_SYSTEM
867 | FORMAT_MESSAGE_IGNORE_INSERTS,
868 0, ::GetLastError(), 0, (LPTSTR) & lpMsgBuf, 0, 0);
869 QString aMsg((char*) &lpMsgBuf);
870 err = QString("Failed to find %1 function. %2").arg( CREATE_MODULE).arg(aMsg);
871 ::LocalFree(lpMsgBuf);
875 void* modLib = dlopen( libName.toLatin1(), RTLD_LAZY | RTLD_GLOBAL );
877 err = QString( "Can not load library %1. %2" ).arg( libName ).arg( dlerror() );
879 crtInst = (CREATE_FUNC)dlsym( modLib, CREATE_MODULE );
881 err = QString( "Failed to find function %1. %2" ).arg( CREATE_MODULE ).arg( dlerror() );
886 ModuleBase_IModule* aModule = crtInst ? crtInst(myModuleConnector) : 0;
888 if (!err.isEmpty()) {
890 Events_Error::send(err.toStdString());
892 qWarning(qPrintable(err));
898 //******************************************************
899 bool XGUI_Workshop::createModule()
901 Config_ModuleReader aModuleReader;
902 QString moduleName = QString::fromStdString(aModuleReader.getModuleName());
903 myModule = loadModule(moduleName);
907 //connect(myDisplayer, SIGNAL(objectDisplayed(ObjectPtr, AISObjectPtr)),
908 // myModule, SLOT(onObjectDisplayed(ObjectPtr, AISObjectPtr)));
909 //connect(myDisplayer, SIGNAL(beforeObjectErase(ObjectPtr, AISObjectPtr)),
910 // myModule, SLOT(onBeforeObjectErase(ObjectPtr, AISObjectPtr)));
912 myModule->createFeatures();
913 //myActionsMgr->update();
917 //******************************************************
918 void XGUI_Workshop::updateCommandStatus()
920 QList<QAction*> aCommands;
921 if (isSalomeMode()) { // update commands in SALOME mode
922 aCommands = salomeConnector()->commandList();
924 AppElements_MainMenu* aMenuBar = myMainWindow->menuObject();
925 foreach (AppElements_Command* aCmd, aMenuBar->features())
926 aCommands.append(aCmd);
928 SessionPtr aMgr = ModelAPI_Session::get();
929 if (aMgr->hasModuleDocument()) {
930 foreach(QAction* aCmd, aCommands) {
931 QString aId = aCmd->data().toString();
932 if (aId == "UNDO_CMD")
933 aCmd->setEnabled(myModule->canUndo());
934 else if (aId == "REDO_CMD")
935 aCmd->setEnabled(myModule->canRedo());
937 // Enable all commands
938 aCmd->setEnabled(true);
942 foreach(QAction* aCmd, aCommands) {
943 QString aId = aCmd->data().toString();
944 if (aId == "NEW_CMD")
945 aCmd->setEnabled(true);
946 else if (aId == "EXIT_CMD")
947 aCmd->setEnabled(true);
949 aCmd->setEnabled(false);
952 myActionsMgr->update();
953 emit commandStatusUpdated();
956 void XGUI_Workshop::updateHistory()
958 std::list<std::string> aUndoList = ModelAPI_Session::get()->undoList();
959 QList<ActionInfo> aUndoRes = processHistoryList(aUndoList);
960 emit updateUndoHistory(aUndoRes);
962 std::list<std::string> aRedoList = ModelAPI_Session::get()->redoList();
963 QList<ActionInfo> aRedoRes = processHistoryList(aRedoList);
964 emit updateRedoHistory(aRedoRes);
967 //******************************************************
968 QDockWidget* XGUI_Workshop::createObjectBrowser(QWidget* theParent)
970 QDockWidget* aObjDock = new QDockWidget(theParent);
971 aObjDock->setAllowedAreas(Qt::LeftDockWidgetArea | Qt::RightDockWidgetArea | Qt::BottomDockWidgetArea);
972 aObjDock->setWindowTitle(tr("Object browser"));
973 aObjDock->setStyleSheet(
974 "::title { position: relative; padding-left: 5px; text-align: left center }");
975 myObjectBrowser = new XGUI_ObjectsBrowser(aObjDock);
976 #ifdef ModuleDataModel
977 myObjectBrowser->setDataModel(myModule->dataModel());
979 myModule->customizeObjectBrowser(myObjectBrowser);
980 aObjDock->setWidget(myObjectBrowser);
982 myContextMenuMgr->connectObjectBrowser();
986 //******************************************************
988 * Creates dock widgets, places them in corresponding area
989 * and tabifies if necessary.
991 void XGUI_Workshop::createDockWidgets()
993 QMainWindow* aDesktop = isSalomeMode() ? salomeConnector()->desktop() : myMainWindow;
994 QDockWidget* aObjDock = createObjectBrowser(aDesktop);
995 aDesktop->addDockWidget(Qt::LeftDockWidgetArea, aObjDock);
996 myPropertyPanel = new XGUI_PropertyPanel(aDesktop);
997 myPropertyPanel->setupActions(myActionsMgr);
998 myPropertyPanel->setAllowedAreas(Qt::LeftDockWidgetArea | Qt::RightDockWidgetArea | Qt::BottomDockWidgetArea);
999 aDesktop->addDockWidget(Qt::LeftDockWidgetArea, myPropertyPanel);
1000 hidePropertyPanel(); ///<! Invisible by default
1001 hideObjectBrowser();
1002 aDesktop->tabifyDockWidget(aObjDock, myPropertyPanel);
1003 myPropertyPanel->installEventFilter(myOperationMgr);
1005 QAction* aOkAct = myActionsMgr->operationStateAction(XGUI_ActionsMgr::Accept);
1006 connect(aOkAct, SIGNAL(triggered()), this, SLOT(onAcceptActionClicked()));
1008 QAction* aCancelAct = myActionsMgr->operationStateAction(XGUI_ActionsMgr::Abort);
1009 connect(aCancelAct, SIGNAL(triggered()), myOperationMgr, SLOT(onAbortOperation()));
1010 connect(myPropertyPanel, SIGNAL(noMoreWidgets()), myModule, SLOT(onNoMoreWidgets()));
1011 connect(myPropertyPanel, SIGNAL(keyReleased(QKeyEvent*)),
1012 myOperationMgr, SLOT(onKeyReleased(QKeyEvent*)));
1013 //connect(myOperationMgr, SIGNAL(validationStateChanged(bool)),
1014 // this, SLOT(onValidationStateChanged(bool)));
1017 //******************************************************
1018 void XGUI_Workshop::showPropertyPanel()
1020 QAction* aViewAct = myPropertyPanel->toggleViewAction();
1021 ///<! Restore ability to close panel from the window's menu
1022 aViewAct->setEnabled(true);
1023 myPropertyPanel->show();
1024 myPropertyPanel->raise();
1026 // The next code is necessary to made the property panel the active window
1027 // in order to operation manager could process key events of the panel.
1028 // otherwise they are ignored. It happens only if the same(activateWindow) is
1029 // not happend by property panel activation(e.g. resume operaion of Sketch)
1030 myPropertyPanel->activateWindow();
1031 myPropertyPanel->setFocus();
1034 //******************************************************
1035 void XGUI_Workshop::hidePropertyPanel()
1037 QAction* aViewAct = myPropertyPanel->toggleViewAction();
1038 ///<! Do not allow to show empty property panel
1039 aViewAct->setEnabled(false);
1040 myPropertyPanel->hide();
1042 // the property panel is active window of the desktop, when it is
1043 // hidden, it is undefined which window becomes active. By this reason
1044 // it is defined to perform the desktop as the active window.
1045 // in SALOME mode, workstack made the PyConsole the active window,
1046 // set the focus on it. As a result, shortcuts of the application, like
1047 // are processed by this console. For example Undo actions.
1048 // It is possible that this code is to be moved to NewGeom package
1049 QMainWindow* aDesktop = isSalomeMode() ? salomeConnector()->desktop() : myMainWindow;
1050 aDesktop->activateWindow();
1051 aDesktop->setFocus();
1054 //******************************************************
1055 void XGUI_Workshop::showObjectBrowser()
1057 myObjectBrowser->parentWidget()->show();
1060 //******************************************************
1061 void XGUI_Workshop::hideObjectBrowser()
1063 myObjectBrowser->parentWidget()->hide();
1066 //******************************************************
1067 void XGUI_Workshop::salomeViewerSelectionChanged()
1069 emit salomeViewerSelection();
1072 //**************************************************************
1073 ModuleBase_IViewer* XGUI_Workshop::salomeViewer() const
1075 return mySalomeConnector->viewer();
1078 //**************************************************************
1079 void XGUI_Workshop::onContextMenuCommand(const QString& theId, bool isChecked)
1081 QObjectPtrList aObjects = mySelector->selection()->selectedObjects();
1082 if (theId == "DELETE_CMD")
1084 else if (theId == "MOVE_CMD")
1086 else if (theId == "COLOR_CMD")
1087 changeColor(aObjects);
1088 else if (theId == "SHOW_CMD")
1089 showObjects(aObjects, true);
1090 else if (theId == "HIDE_CMD")
1091 showObjects(aObjects, false);
1092 else if (theId == "SHOW_ONLY_CMD")
1093 showOnlyObjects(aObjects);
1094 else if (theId == "SHADING_CMD")
1095 setDisplayMode(aObjects, XGUI_Displayer::Shading);
1096 else if (theId == "WIREFRAME_CMD")
1097 setDisplayMode(aObjects, XGUI_Displayer::Wireframe);
1098 else if (theId == "HIDEALL_CMD") {
1099 QObjectPtrList aList = myDisplayer->displayedObjects();
1100 foreach (ObjectPtr aObj, aList) {
1101 if (module()->canEraseObject(aObj))
1102 aObj->setDisplayed(false);
1104 Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
1108 //**************************************************************
1109 void XGUI_Workshop::deleteObjects()
1111 ModuleBase_IModule* aModule = module();
1112 // 1. allow the module to delete objects, do nothing if it has succeed
1113 if (aModule->deleteObjects()) {
1114 updateCommandStatus();
1118 if (!abortAllOperations())
1120 QObjectPtrList anObjects = mySelector->selection()->selectedObjects();
1121 // It is necessary to clear selection in order to avoid selection changed event during
1122 // deleteion and negative consequences connected with processing of already deleted items
1123 mySelector->clearSelection();
1124 // check whether the object can be deleted. There should not be parts which are not loaded
1125 if (!XGUI_Tools::canRemoveOrRename(myMainWindow, anObjects))
1128 bool hasResult = false;
1129 bool hasFeature = false;
1130 bool hasParameter = false;
1131 bool hasSubFeature = false;
1132 ModuleBase_Tools::checkObjects(anObjects, hasResult, hasFeature, hasParameter, hasSubFeature);
1133 if (!(hasFeature || hasParameter))
1136 // 1. start operation
1137 QString aDescription = contextMenuMgr()->action("DELETE_CMD")->text();
1138 aDescription += tr(" %1");
1139 QStringList aObjectNames;
1140 foreach (ObjectPtr aObj, anObjects) {
1141 if (!aObj->data()->isValid())
1143 aObjectNames << QString::fromStdString(aObj->data()->name());
1145 aDescription = aDescription.arg(aObjectNames.join(", "));
1146 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, module());
1148 operationMgr()->startOperation(anOpAction);
1149 // 3. delete objects
1150 QMainWindow* aDesktop = isSalomeMode() ? salomeConnector()->desktop() : myMainWindow;
1151 std::set<FeaturePtr> anIgnoredFeatures;
1152 if (deleteFeatures(anObjects, anIgnoredFeatures, aDesktop, true)) {
1153 operationMgr()->commitOperation();
1156 operationMgr()->abortOperation(operationMgr()->currentOperation());
1160 //**************************************************************
1161 void XGUI_Workshop::moveObjects()
1163 if (!abortAllOperations())
1166 SessionPtr aMgr = ModelAPI_Session::get();
1168 QString anActionId = "MOVE_CMD";
1169 QString aDescription = contextMenuMgr()->action(anActionId)->text();
1170 aMgr->startOperation(aDescription.toStdString());
1172 QObjectPtrList anObjects = mySelector->selection()->selectedObjects();
1173 // It is necessary to clear selection in order to avoid selection changed event during
1174 // moving and negative consequences connected with processing of already moved items
1175 mySelector->clearSelection();
1176 // check whether the object can be moved. There should not be parts which are not loaded
1177 if (!XGUI_Tools::canRemoveOrRename(myMainWindow, anObjects))
1180 DocumentPtr anActiveDocument = aMgr->activeDocument();
1181 FeaturePtr aCurrentFeature = anActiveDocument->currentFeature(true);
1182 foreach (ObjectPtr aObject, anObjects) {
1183 if (!myModule->canApplyAction(aObject, anActionId))
1186 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1187 if (aFeature.get()) {
1188 anActiveDocument->moveFeature(aFeature, aCurrentFeature);
1189 aCurrentFeature = anActiveDocument->currentFeature(true);
1192 aMgr->finishOperation();
1195 //**************************************************************
1196 bool XGUI_Workshop::deleteFeatures(const QObjectPtrList& theList,
1197 const std::set<FeaturePtr>& theIgnoredFeatures,
1199 const bool theAskAboutDeleteReferences)
1203 QObjectPtrList::const_iterator aDIt = theList.begin(), aDLast = theList.end();
1204 for (; aDIt != aDLast; ++aDIt) {
1205 aDInfo.append(ModuleBase_Tools::objectInfo((*aDIt)));
1207 QString anInfoStr = aDInfo.join(", ");
1208 qDebug(QString("deleteFeatures: %1, %2").arg(theList.size()).arg(anInfoStr).toStdString().c_str());
1211 // 1. find all referenced features
1212 std::set<FeaturePtr> aDirectRefFeatures, aIndirectRefFeatures;
1213 foreach (ObjectPtr aDeletedObj, theList) {
1214 XGUI_Tools::refsToFeatureInAllDocuments(aDeletedObj, aDeletedObj, aDirectRefFeatures, aIndirectRefFeatures);
1215 std::set<FeaturePtr> aDifference;
1216 std::set_difference(aIndirectRefFeatures.begin(), aIndirectRefFeatures.end(),
1217 aDirectRefFeatures.begin(), aDirectRefFeatures.end(),
1218 std::inserter(aDifference, aDifference.begin()));
1219 aIndirectRefFeatures = aDifference;
1221 // 2. warn about the references remove, break the delete operation if the user chose it
1222 if (theAskAboutDeleteReferences && !aDirectRefFeatures.empty()) {
1223 QStringList aDirectRefNames;
1224 foreach(const FeaturePtr& aFeature, aDirectRefFeatures)
1225 aDirectRefNames.append(aFeature->name().c_str());
1226 QString aDirectNames = aDirectRefNames.join(", ");
1228 QStringList aIndirectRefNames;
1229 foreach(const FeaturePtr& aFeature, aIndirectRefFeatures)
1230 aIndirectRefNames.append(aFeature->name().c_str());
1231 QString aIndirectNames = aIndirectRefNames.join(", ");
1233 QMessageBox::StandardButton aRes = QMessageBox::warning(
1234 theParent, tr("Delete features"),
1235 QString(tr("Selected features are used in the following features: %1.\
1236 These features will be deleted.\n%2Would you like to continue?")).arg(aDirectNames)
1237 .arg(aIndirectNames.isEmpty() ? QString() : QString("Also these features will be deleted: %1.\n").arg(aIndirectNames)),
1238 QMessageBox::No | QMessageBox::Yes, QMessageBox::No);
1239 if (aRes != QMessageBox::Yes)
1243 // 3. remove referenced features
1244 std::set<FeaturePtr> aFeaturesToDelete = aDirectRefFeatures;
1245 aFeaturesToDelete.insert(aIndirectRefFeatures.begin(), aIndirectRefFeatures.end());
1246 std::set<FeaturePtr>::const_iterator anIt = aFeaturesToDelete.begin(),
1247 aLast = aFeaturesToDelete.end();
1251 for (; anIt != aLast; anIt++) {
1252 FeaturePtr aFeature = (*anIt);
1253 DocumentPtr aDoc = aFeature->document();
1254 if (theIgnoredFeatures.find(aFeature) == theIgnoredFeatures.end()) {
1255 aDoc->removeFeature(aFeature);
1257 anInfo.append(ModuleBase_Tools::objectInfo(aFeature).toStdString().c_str());
1262 qDebug(QString("remove references:%1").arg(anInfo.join("; ")).toStdString().c_str());
1266 QString anActionId = "DELETE_CMD";
1267 QString anId = QString::fromStdString(anActionId.toStdString().c_str());
1268 QStringList anObjectGroups = contextMenuMgr()->actionObjectGroups(anId);
1269 // 4. remove the parameter features
1270 foreach (ObjectPtr aObj, theList) {
1271 // features and parameters can be removed here,
1272 // the results are removed only by a corresponded feature remove
1273 std::string aGroupName = aObj->groupName();
1274 if (!anObjectGroups.contains(aGroupName.c_str()))
1277 if (!myModule->canApplyAction(aObj, anActionId))
1280 FeaturePtr aFeature = ModelAPI_Feature::feature(aObj);
1282 /*// TODO: to learn the workshop to delegate the Part object deletion to the PartSet module
1283 // part features are removed in the PartSet module. This condition should be moved there
1284 if (aFeature->getKind() == "Part")
1287 DocumentPtr aDoc = aObj->document();
1288 if (theIgnoredFeatures.find(aFeature) == theIgnoredFeatures.end()) {
1290 QString anInfoStr = ModuleBase_Tools::objectInfo(aFeature);
1291 anInfo.append(anInfoStr);
1292 qDebug(QString("remove feature :%1").arg(anInfoStr).toStdString().c_str());
1294 aDoc->removeFeature(aFeature);
1299 qDebug(QString("remove features:%1").arg(anInfo.join("; ")).toStdString().c_str());
1304 bool hasResults(QObjectPtrList theObjects, const std::set<std::string>& theTypes)
1306 bool isFoundResultType = false;
1307 foreach(ObjectPtr anObj, theObjects)
1309 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObj);
1310 if (aResult.get() == NULL)
1313 isFoundResultType = theTypes.find(aResult->groupName()) != theTypes.end();
1314 if (isFoundResultType)
1317 return isFoundResultType;
1320 //**************************************************************
1321 // Returns the list of all features for theDocument and all features of
1322 // all nested parts.
1323 std::list<FeaturePtr> allFeatures(const DocumentPtr& theDocument)
1325 std::list<FeaturePtr> aResultList;
1326 std::list<FeaturePtr> anAllFeatures = theDocument->allFeatures();
1327 foreach (const FeaturePtr& aFeature, anAllFeatures) {
1328 // The order of appending features of the part and the part itself is important
1330 // Append features from a part feature
1331 foreach (const ResultPtr& aResult, aFeature->results()) {
1332 ResultPartPtr aResultPart =
1333 std::dynamic_pointer_cast<ModelAPI_ResultPart>(aResult);
1334 if (aResultPart.get() && aResultPart->partDoc().get()) {
1336 std::list<FeaturePtr> anAllFeatures = allFeatures(aResultPart->partDoc());
1337 aResultList.insert(aResultList.end(), anAllFeatures.begin(), anAllFeatures.end());
1341 aResultList.push_back(aFeature);
1346 //**************************************************************
1347 // Returns the list of features placed between theObject and the current feature
1348 // in the same document. Excludes theObject, includes the current feature.
1349 std::list<FeaturePtr> toCurrentFeatures(const ObjectPtr& theObject)
1351 std::list<FeaturePtr> aResult;
1352 DocumentPtr aDocument = theObject->document();
1353 std::list<FeaturePtr> anAllFeatures = allFeatures(aDocument);
1354 // find the object iterator
1355 std::list<FeaturePtr>::iterator aObjectIt = std::find(anAllFeatures.begin(), anAllFeatures.end(), theObject);
1356 if (aObjectIt == anAllFeatures.end())
1358 // find the current feature iterator
1359 std::list<FeaturePtr>::iterator aCurrentIt = std::find(anAllFeatures.begin(), anAllFeatures.end(), aDocument->currentFeature(true));
1360 if (aCurrentIt == anAllFeatures.end())
1362 // check the right order
1363 if (std::distance(aObjectIt, anAllFeatures.end()) <= std::distance(aCurrentIt, anAllFeatures.end()))
1365 // exclude the object
1366 std::advance(aObjectIt, 1);
1367 // include the current feature
1368 std::advance(aCurrentIt, 1);
1369 return std::list<FeaturePtr>(aObjectIt, aCurrentIt);
1372 bool XGUI_Workshop::canMoveFeature()
1374 QString anActionId = "MOVE_CMD";
1376 QObjectPtrList aObjects = mySelector->selection()->selectedObjects();
1377 QObjectPtrList aValidatedObjects;
1378 foreach (ObjectPtr aObject, aObjects) {
1379 if (!myModule->canApplyAction(aObject, anActionId))
1381 // To be moved feature should be in active document
1382 if (aObject->document() != ModelAPI_Session::get()->activeDocument())
1384 aValidatedObjects.append(aObject);
1386 if (aValidatedObjects.size() != aObjects.size())
1387 aObjects = aValidatedObjects;
1389 bool aCanMove = !aObjects.empty();
1391 QObjectPtrList::const_iterator anIt = aObjects.begin(), aLast = aObjects.end();
1392 for (; anIt != aLast && aCanMove; anIt++) {
1393 ObjectPtr aObject = *anIt;
1394 // 1. Get features placed between selected and current in the document
1395 std::list<FeaturePtr> aFeaturesBetween = toCurrentFeatures(aObject);
1396 // if aFeaturesBetween is empty it means wrong order or aObject is the current feature
1397 if (aFeaturesBetween.empty())
1400 std::set<FeaturePtr> aPlacedFeatures(aFeaturesBetween.begin(), aFeaturesBetween.end());
1401 // 2. Get all reference features to the selected object in the document
1402 std::set<FeaturePtr> aRefFeatures;
1403 XGUI_Tools::refsToFeatureInFeatureDocument(aObject, aRefFeatures);
1405 if (aRefFeatures.empty())
1408 // 3. Find any placed features in all reference features
1409 std::set<FeaturePtr> aIntersectionFeatures;
1410 std::set_intersection(aRefFeatures.begin(), aRefFeatures.end(),
1411 aPlacedFeatures.begin(), aPlacedFeatures.end(),
1412 std::inserter(aIntersectionFeatures, aIntersectionFeatures.begin()));
1413 // 4. Return false if any reference feature is placed before current feature
1414 if (!aIntersectionFeatures.empty())
1422 //**************************************************************
1423 bool XGUI_Workshop::canBeShaded(const ObjectPtr& theObject) const
1425 bool aCanBeShaded = myDisplayer->canBeShaded(theObject);
1426 if (!aCanBeShaded) {
1427 ResultCompSolidPtr aCompsolidResult =
1428 std::dynamic_pointer_cast<ModelAPI_ResultCompSolid>(theObject);
1429 if (aCompsolidResult.get() != NULL) { // change colors for all sub-solids
1430 for(int i = 0; i < aCompsolidResult->numberOfSubs() && !aCanBeShaded; i++)
1431 aCanBeShaded = myDisplayer->canBeShaded(aCompsolidResult->subResult(i));
1434 return aCanBeShaded;
1437 //**************************************************************
1438 bool XGUI_Workshop::canChangeColor() const
1440 QObjectPtrList aObjects = mySelector->selection()->selectedObjects();
1442 std::set<std::string> aTypes;
1443 aTypes.insert(ModelAPI_ResultGroup::group());
1444 aTypes.insert(ModelAPI_ResultConstruction::group());
1445 aTypes.insert(ModelAPI_ResultBody::group());
1446 aTypes.insert(ModelAPI_ResultPart::group());
1448 return hasResults(aObjects, aTypes);
1451 void setColor(ResultPtr theResult, std::vector<int>& theColor)
1453 if (!theResult.get())
1456 AttributeIntArrayPtr aColorAttr = theResult->data()->intArray(ModelAPI_Result::COLOR_ID());
1457 if (aColorAttr.get() != NULL) {
1458 if (!aColorAttr->size()) {
1459 aColorAttr->setSize(3);
1461 aColorAttr->setValue(0, theColor[0]);
1462 aColorAttr->setValue(1, theColor[1]);
1463 aColorAttr->setValue(2, theColor[2]);
1467 //**************************************************************
1468 void XGUI_Workshop::changeColor(const QObjectPtrList& theObjects)
1470 AttributeIntArrayPtr aColorAttr;
1471 // 1. find the current color of the object. This is a color of AIS presentation
1472 // The objects are iterated until a first valid color is found
1473 std::vector<int> aColor;
1474 foreach(ObjectPtr anObject, theObjects) {
1475 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObject);
1476 if (aResult.get()) {
1477 XGUI_CustomPrs::getResultColor(aResult, aColor);
1480 // TODO: remove the obtaining a color from the AIS object
1481 // this does not happen never because:
1482 // 1. The color can be changed only on results
1483 // 2. The result can be not visualized in the viewer(e.g. Origin Construction)
1484 AISObjectPtr anAISObj = myDisplayer->getAISObject(anObject);
1485 if (anAISObj.get()) {
1487 anAISObj->getColor(aColor[0], aColor[1], aColor[2]);
1490 if (!aColor.empty())
1493 if (aColor.size() != 3)
1496 // 2. show the dialog to change the value
1497 XGUI_ColorDialog* aDlg = new XGUI_ColorDialog(mainWindow());
1498 aDlg->setColor(aColor);
1499 aDlg->move(QCursor::pos());
1500 bool isDone = aDlg->exec() == QDialog::Accepted;
1504 bool isRandomColor = aDlg->isRandomColor();
1506 // 3. abort the previous operation and start a new one
1507 SessionPtr aMgr = ModelAPI_Session::get();
1508 bool aWasOperation = aMgr->isOperation(); // keep this value
1509 if (!aWasOperation) {
1510 QString aDescription = contextMenuMgr()->action("COLOR_CMD")->text();
1511 aMgr->startOperation(aDescription.toStdString());
1514 // 4. set the value to all results
1515 std::vector<int> aColorResult = aDlg->getColor();
1516 foreach(ObjectPtr anObj, theObjects) {
1517 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObj);
1518 if (aResult.get() != NULL) {
1519 ResultCompSolidPtr aCompsolidResult = std::dynamic_pointer_cast<ModelAPI_ResultCompSolid>(aResult);
1520 if (aCompsolidResult.get() != NULL) { // change colors for all sub-solids
1521 for(int i = 0; i < aCompsolidResult->numberOfSubs(); i++)
1522 setColor(aCompsolidResult->subResult(i), aColorResult);
1524 setColor(aResult, aColorResult);
1528 aMgr->finishOperation();
1529 updateCommandStatus();
1532 //**************************************************************
1533 #define SET_DISPLAY_GROUP(aGroupName, aDisplay) \
1534 for (int i = 0; i < aDoc->size(aGroupName); i++) { \
1535 aDoc->object(aGroupName, i)->setDisplayed(aDisplay); \
1537 void XGUI_Workshop::showObjects(const QObjectPtrList& theList, bool isVisible)
1539 foreach (ObjectPtr aObj, theList) {
1541 ResultPartPtr aPartRes = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1543 DocumentPtr aDoc = aPartRes->partDoc();
1544 SET_DISPLAY_GROUP(ModelAPI_ResultBody::group(), isVisible)
1545 SET_DISPLAY_GROUP(ModelAPI_ResultConstruction::group(), isVisible)
1546 SET_DISPLAY_GROUP(ModelAPI_ResultGroup::group(), isVisible)
1549 aObj->setDisplayed(isVisible);
1552 Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
1555 //**************************************************************
1556 void XGUI_Workshop::showOnlyObjects(const QObjectPtrList& theList)
1558 // Hide all displayed objects
1559 QObjectPtrList aList = myDisplayer->displayedObjects();
1560 foreach (ObjectPtr aObj, aList) {
1561 if (module()->canEraseObject(aObj))
1562 aObj->setDisplayed(false);
1565 // Show only objects from the list
1566 foreach (ObjectPtr aObj, theList) {
1568 ResultPartPtr aPartRes = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1570 DocumentPtr aDoc = aPartRes->partDoc();
1571 SET_DISPLAY_GROUP(ModelAPI_ResultBody::group(), true)
1572 SET_DISPLAY_GROUP(ModelAPI_ResultConstruction::group(), true)
1573 SET_DISPLAY_GROUP(ModelAPI_ResultGroup::group(), true)
1576 aObj->setDisplayed(true);
1579 Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
1584 //**************************************************************
1585 void XGUI_Workshop::registerValidators() const
1587 SessionPtr aMgr = ModelAPI_Session::get();
1588 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
1591 //**************************************************************
1592 void XGUI_Workshop::displayDocumentResults(DocumentPtr theDoc)
1596 displayGroupResults(theDoc, ModelAPI_ResultConstruction::group());
1597 displayGroupResults(theDoc, ModelAPI_ResultBody::group());
1600 //**************************************************************
1601 void XGUI_Workshop::displayGroupResults(DocumentPtr theDoc, std::string theGroup)
1603 for (int i = 0; i < theDoc->size(theGroup); i++)
1604 theDoc->object(theGroup, i)->setDisplayed(true);
1605 //displayObject(theDoc->object(theGroup, i));
1606 Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
1609 //**************************************************************
1610 void XGUI_Workshop::setDisplayMode(const QObjectPtrList& theList, int theMode)
1612 foreach(ObjectPtr aObj, theList) {
1613 myDisplayer->setDisplayMode(aObj, (XGUI_Displayer::DisplayMode)theMode, false);
1615 ResultCompSolidPtr aCompsolidResult = std::dynamic_pointer_cast<ModelAPI_ResultCompSolid>(aObj);
1616 if (aCompsolidResult.get() != NULL) { // change colors for all sub-solids
1617 for(int i = 0; i < aCompsolidResult->numberOfSubs(); i++) {
1618 myDisplayer->setDisplayMode(aCompsolidResult->subResult(i),
1619 (XGUI_Displayer::DisplayMode)theMode, false);
1623 if (theList.size() > 0)
1624 myDisplayer->updateViewer();
1627 //**************************************************************
1628 void XGUI_Workshop::closeDocument()
1630 ModuleBase_Operation* anOperation = operationMgr()->currentOperation();
1631 while (anOperation) {
1632 anOperation->abort();
1633 anOperation = operationMgr()->currentOperation();
1635 myDisplayer->closeLocalContexts();
1636 myDisplayer->eraseAll();
1637 objectBrowser()->clearContent();
1639 module()->closeDocument();
1641 SessionPtr aMgr = ModelAPI_Session::get();
1645 void XGUI_Workshop::addHistoryMenu(QObject* theObject, const char* theSignal, const char* theSlot)
1647 XGUI_HistoryMenu* aMenu = NULL;
1648 if (isSalomeMode()) {
1649 QAction* anAction = qobject_cast<QAction*>(theObject);
1652 aMenu = new XGUI_HistoryMenu(anAction);
1654 QToolButton* aButton = qobject_cast<QToolButton*>(theObject);
1655 aMenu = new XGUI_HistoryMenu(aButton);
1657 connect(this, theSignal, aMenu, SLOT(setHistory(const QList<ActionInfo>&)));
1658 connect(aMenu, SIGNAL(actionSelected(int)), this, theSlot);
1661 QList<ActionInfo> XGUI_Workshop::processHistoryList(const std::list<std::string>& theList) const
1663 QList<ActionInfo> aResult;
1664 std::list<std::string>::const_iterator it = theList.cbegin();
1665 for (; it != theList.cend(); it++) {
1666 QString anId = QString::fromStdString(*it);
1667 bool isEditing = anId.endsWith(ModuleBase_OperationFeature::EditSuffix());
1669 anId.chop(ModuleBase_OperationFeature::EditSuffix().size());
1672 QAction* aContextMenuAct = myContextMenuMgr->actionByName(anId);
1673 if (aContextMenuAct) {
1674 anInfo.initFrom(aContextMenuAct);
1676 anInfo = myActionsMgr->actionInfoById(anId);
1679 anInfo.text = anInfo.text.prepend("Modify ");