1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D -->
3 //#include "XGUI_Constants.h"
4 #include "XGUI_Workshop.h"
6 #include "XGUI_ActionsMgr.h"
7 #include "XGUI_ColorDialog.h"
8 #include "XGUI_ContextMenuMgr.h"
9 #include "XGUI_Displayer.h"
10 #include "XGUI_ErrorDialog.h"
11 #include "XGUI_ErrorMgr.h"
12 #include "XGUI_ModuleConnector.h"
13 #include "XGUI_ObjectsBrowser.h"
14 #include "XGUI_OperationMgr.h"
15 #include "XGUI_PropertyPanel.h"
16 #include "XGUI_SalomeConnector.h"
17 #include "XGUI_Selection.h"
18 #include "XGUI_SelectionMgr.h"
19 #include "XGUI_Tools.h"
20 #include "XGUI_ViewerProxy.h"
21 #include "XGUI_WorkshopListener.h"
22 #include <XGUI_CustomPrs.h>
23 #include <XGUI_HistoryMenu.h>
24 #include <XGUI_QtEvents.h>
27 #include <AppElements_Button.h>
28 #include <AppElements_Command.h>
29 #include <AppElements_MainMenu.h>
30 #include <AppElements_MainWindow.h>
31 #include <AppElements_MenuGroupPanel.h>
32 #include <AppElements_Viewer.h>
33 #include <AppElements_Workbench.h>
36 #include <ModelAPI_AttributeDocRef.h>
37 #include <ModelAPI_AttributeIntArray.h>
38 #include <ModelAPI_Data.h>
39 #include <ModelAPI_Events.h>
40 #include <ModelAPI_Feature.h>
41 #include <ModelAPI_Object.h>
42 #include <ModelAPI_ResultBody.h>
43 #include <ModelAPI_ResultConstruction.h>
44 #include <ModelAPI_ResultGroup.h>
45 #include <ModelAPI_ResultParameter.h>
46 #include <ModelAPI_Session.h>
47 #include <ModelAPI_Validator.h>
48 #include <ModelAPI_ResultCompSolid.h>
49 #include <ModelAPI_Tools.h>
51 //#include <PartSetPlugin_Part.h>
53 #include <Events_Loop.h>
54 #include <Events_Error.h>
55 #include <Events_LongOp.h>
57 #include <ModuleBase_FilterFactory.h>
58 #include <ModuleBase_IModule.h>
59 #include <ModuleBase_IViewer.h>
60 #include <ModuleBase_Operation.h>
61 #include <ModuleBase_OperationDescription.h>
62 #include <ModuleBase_PageBase.h>
63 #include <ModuleBase_Preferences.h>
64 #include <ModuleBase_SelectionValidator.h>
65 #include <ModuleBase_Tools.h>
66 #include <ModuleBase_WidgetFactory.h>
67 #include <ModuleBase_OperationFeature.h>
68 #include <ModuleBase_OperationAction.h>
69 #include <ModuleBase_PagedContainer.h>
70 #include <ModuleBase_WidgetValidated.h>
72 #include <Config_Common.h>
73 #include <Config_FeatureMessage.h>
74 #include <Config_ModuleReader.h>
75 #include <Config_PointerMessage.h>
76 #include <Config_PropManager.h>
77 #include <Config_SelectionFilterMessage.h>
79 #include <SUIT_ResourceMgr.h>
81 #include <QApplication>
82 #include <QFileDialog>
83 #include <QMessageBox>
84 #include <QMdiSubWindow>
85 #include <QMainWindow>
86 #include <QPushButton>
87 #include <QDockWidget>
92 #include <QToolButton>
94 #include <QDesktopWidget>
110 QString XGUI_Workshop::MOVE_TO_END_COMMAND = QObject::tr("Move to the end");
112 //#define DEBUG_DELETE
113 //#define DEBUG_FEATURE_NAME
115 XGUI_Workshop::XGUI_Workshop(XGUI_SalomeConnector* theConnector)
117 myCurrentDir(QString()),
119 mySalomeConnector(theConnector),
123 myViewerSelMode(TopAbs_FACE)
126 myMainWindow = new AppElements_MainWindow();
128 SUIT_ResourceMgr* aResMgr = ModuleBase_Preferences::resourceMgr();
129 bool aCloc = aResMgr->booleanValue("language", "locale", true);
131 QLocale::setDefault( QLocale::c() );
133 QLocale::setDefault( QLocale::system() );
136 myDisplayer = new XGUI_Displayer(this);
138 mySelector = new XGUI_SelectionMgr(this);
139 connect(mySelector, SIGNAL(selectionChanged()), this, SLOT(updateCommandStatus()));
141 myOperationMgr = new XGUI_OperationMgr(this, 0);
142 myActionsMgr = new XGUI_ActionsMgr(this);
143 myErrorDlg = new XGUI_ErrorDialog(QApplication::desktop());
144 myContextMenuMgr = new XGUI_ContextMenuMgr(this);
145 connect(myContextMenuMgr, SIGNAL(actionTriggered(const QString&, bool)), this,
146 SLOT(onContextMenuCommand(const QString&, bool)));
148 myViewerProxy = new XGUI_ViewerProxy(this);
149 connect(myViewerProxy, SIGNAL(selectionChanged()),
150 myActionsMgr, SLOT(updateOnViewSelection()));
152 myModuleConnector = new XGUI_ModuleConnector(this);
154 ModuleBase_IWorkshop* aWorkshop = moduleConnector();
155 myOperationMgr->setWorkshop(aWorkshop);
157 myErrorMgr = new XGUI_ErrorMgr(this, aWorkshop);
158 myEventsListener = new XGUI_WorkshopListener(aWorkshop);
160 connect(myOperationMgr, SIGNAL(operationStarted(ModuleBase_Operation*)),
161 SLOT(onOperationStarted(ModuleBase_Operation*)));
162 connect(myOperationMgr, SIGNAL(operationResumed(ModuleBase_Operation*)),
163 SLOT(onOperationResumed(ModuleBase_Operation*)));
164 connect(myOperationMgr, SIGNAL(operationStopped(ModuleBase_Operation*)),
165 SLOT(onOperationStopped(ModuleBase_Operation*)));
166 connect(myOperationMgr, SIGNAL(operationCommitted(ModuleBase_Operation*)),
167 SLOT(onOperationCommitted(ModuleBase_Operation*)));
168 connect(myOperationMgr, SIGNAL(operationAborted(ModuleBase_Operation*)),
169 SLOT(onOperationAborted(ModuleBase_Operation*)));
172 connect(myMainWindow, SIGNAL(exitKeySequence()), SLOT(onExit()));
173 onTrihedronVisibilityChanged(true);
176 connect(this, SIGNAL(errorOccurred(const QString&)), myErrorDlg, SLOT(addError(const QString&)));
177 connect(myEventsListener, SIGNAL(errorOccurred(const QString&)),
178 myErrorDlg, SLOT(addError(const QString&)));
180 //Config_PropManager::registerProp("Visualization", "object_default_color", "Object color",
181 // Config_Prop::Color, "225,225,225");
183 Config_PropManager::registerProp("Visualization", "result_body_color", "Body color",
184 Config_Prop::Color, ModelAPI_ResultBody::DEFAULT_COLOR());
185 Config_PropManager::registerProp("Visualization", "result_group_color", "Group color",
186 Config_Prop::Color, ModelAPI_ResultGroup::DEFAULT_COLOR());
187 Config_PropManager::registerProp("Visualization", "result_construction_color", "Construction color",
188 Config_Prop::Color, ModelAPI_ResultConstruction::DEFAULT_COLOR());
189 Config_PropManager::registerProp("Visualization", "result_part_color", "Part color",
190 Config_Prop::Color, ModelAPI_ResultPart::DEFAULT_COLOR());
193 ModuleBase_Preferences::resourceMgr()->integerValue("Viewer", "selection", TopAbs_FACE);
196 //******************************************************
197 XGUI_Workshop::~XGUI_Workshop(void)
202 //******************************************************
203 void XGUI_Workshop::startApplication()
207 Config_PropManager::registerProp("Plugins", "default_path", "Default Path",
208 Config_Prop::Directory, "");
210 //Initialize event listening
211 myEventsListener->initializeEventListening();
213 registerValidators();
215 // Calling of loadCustomProps before activating module is required
216 // by Config_PropManger to restore user-defined path to plugins
217 ModuleBase_Preferences::loadCustomProps();
221 myMainWindow->show();
222 updateCommandStatus();
227 myViewerProxy->connectViewProxy();
228 connect(myViewerProxy, SIGNAL(trihedronVisibilityChanged(bool)),
229 SLOT(onTrihedronVisibilityChanged(bool)));
231 emit applicationStarted();
234 void XGUI_Workshop::activateModule()
236 myModule->activateSelectionFilters();
238 connect(myDisplayer, SIGNAL(objectDisplayed(ObjectPtr, AISObjectPtr)),
239 myModule, SLOT(onObjectDisplayed(ObjectPtr, AISObjectPtr)));
240 connect(myDisplayer, SIGNAL(beforeObjectErase(ObjectPtr, AISObjectPtr)),
241 myModule, SLOT(onBeforeObjectErase(ObjectPtr, AISObjectPtr)));
243 updateCommandStatus();
245 // TODO: get default selection mode
247 // activate visualized objects in the viewer
248 activateObjectsSelection(displayer()->displayedObjects());
249 myOperationMgr->activate();
252 void XGUI_Workshop::deactivateModule()
254 myModule->deactivateSelectionFilters();
256 // remove internal displayer filter
257 displayer()->deactivateSelectionFilters();
259 disconnect(myDisplayer, SIGNAL(objectDisplayed(ObjectPtr, AISObjectPtr)),
260 myModule, SLOT(onObjectDisplayed(ObjectPtr, AISObjectPtr)));
261 disconnect(myDisplayer, SIGNAL(beforeObjectErase(ObjectPtr, AISObjectPtr)),
262 myModule, SLOT(onBeforeObjectErase(ObjectPtr, AISObjectPtr)));
264 XGUI_Displayer* aDisplayer = displayer();
265 QObjectPtrList aDisplayed = aDisplayer->displayedObjects();
266 aDisplayer->deactivateObjects(aDisplayed, true);
268 myOperationMgr->deactivate();
271 //******************************************************
272 void XGUI_Workshop::initMenu()
274 myContextMenuMgr->createActions();
277 // Create only Undo, Redo commands
278 QAction* aAction = salomeConnector()->addDesktopCommand("UNDO_CMD", tr("Undo"),
279 tr("Undo last command"),
280 QIcon(":pictures/undo.png"),
281 QKeySequence::Undo, false, "MEN_DESK_EDIT");
282 QString aToolBarTitle = tr( "INF_DESK_TOOLBAR_STANDARD" );
283 salomeConnector()->addActionInToolbar( aAction,aToolBarTitle );
285 connect(aAction, SIGNAL(triggered(bool)), this, SLOT(onUndo()));
286 addHistoryMenu(aAction, SIGNAL(updateUndoHistory(const QList<ActionInfo>&)), SLOT(onUndo(int)));
288 aAction = salomeConnector()->addDesktopCommand("REDO_CMD", tr("Redo"), tr("Redo last command"),
289 QIcon(":pictures/redo.png"), QKeySequence::Redo,
290 false, "MEN_DESK_EDIT");
291 salomeConnector()->addActionInToolbar( aAction, aToolBarTitle );
293 connect(aAction, SIGNAL(triggered(bool)), this, SLOT(onRedo()));
294 addHistoryMenu(aAction, SIGNAL(updateRedoHistory(const QList<ActionInfo>&)), SLOT(onRedo(int)));
296 salomeConnector()->addDesktopMenuSeparator("MEN_DESK_EDIT");
297 //aAction = salomeConnector()->addDesktopCommand("REBUILD_CMD", tr("Rebuild"), tr("Rebuild data objects"),
298 // QIcon(":pictures/rebuild.png"), QKeySequence(),
299 // false, "MEN_DESK_EDIT");
300 //salomeConnector()->addActionInToolbar( aAction, aToolBarTitle );
302 //connect(aAction, SIGNAL(triggered(bool)), this, SLOT(onRebuild()));
303 //salomeConnector()->addDesktopMenuSeparator("MEN_DESK_EDIT");
305 aAction = salomeConnector()->addDesktopCommand("SAVEAS_CMD", tr("Export native..."), tr("Export the current document into a native file"),
306 QIcon(), QKeySequence(),
307 false, "MEN_DESK_FILE");
308 connect(aAction, SIGNAL(triggered(bool)), this, SLOT(onSaveAs()));
310 aAction = salomeConnector()->addDesktopCommand("OPEN_CMD", tr("Import native..."), tr("Import native file"),
311 QIcon(), QKeySequence(),
312 false, "MEN_DESK_FILE");
313 connect(aAction, SIGNAL(triggered(bool)), this, SLOT(onOpen()));
314 salomeConnector()->addDesktopMenuSeparator("MEN_DESK_FILE");
317 // File commands group
318 AppElements_MenuGroupPanel* aGroup = myMainWindow->menuObject()->generalPage();
320 AppElements_Command* aCommand;
322 aCommand = aGroup->addFeature("SAVE_CMD", tr("Save"), tr("Save the document"),
323 QIcon(":pictures/save.png"), QKeySequence::Save);
324 aCommand->connectTo(this, SLOT(onSave()));
325 //aCommand->disable();
327 aCommand = aGroup->addFeature("SAVEAS_CMD", tr("Save as..."), tr("Save the document into a file"),
328 QIcon(":pictures/save.png"), QKeySequence());
329 aCommand->connectTo(this, SLOT(onSaveAs()));
331 QString aUndoId = "UNDO_CMD";
332 aCommand = aGroup->addFeature(aUndoId, tr("Undo"), tr("Undo last command"),
333 QIcon(":pictures/undo.png"), QKeySequence::Undo);
334 aCommand->connectTo(this, SLOT(onUndo()));
335 AppElements_Button* aUndoButton = qobject_cast<AppElements_Button*>(aGroup->widget(aUndoId));
336 addHistoryMenu(aUndoButton,
337 SIGNAL(updateUndoHistory(const QList<ActionInfo>&)),
340 QString aRedoId = "REDO_CMD";
341 aCommand = aGroup->addFeature(aRedoId, tr("Redo"), tr("Redo last command"),
342 QIcon(":pictures/redo.png"), QKeySequence::Redo);
343 aCommand->connectTo(this, SLOT(onRedo()));
344 AppElements_Button* aRedoButton = qobject_cast<AppElements_Button*>(aGroup->widget(aRedoId));
345 addHistoryMenu(aRedoButton,
346 SIGNAL(updateRedoHistory(const QList<ActionInfo>&)),
349 //aCommand = aGroup->addFeature("REBUILD_CMD", tr("Rebuild"), tr("Rebuild data objects"),
350 // QIcon(":pictures/rebuild.png"), QKeySequence());
351 //aCommand->connectTo(this, SLOT(onRebuild()));
353 //aCommand->disable();
355 aCommand = aGroup->addFeature("OPEN_CMD", tr("Open..."), tr("Open a new document"),
356 QIcon(":pictures/open.png"), QKeySequence::Open);
357 aCommand->connectTo(this, SLOT(onOpen()));
359 aCommand = aGroup->addFeature("PREF_CMD", tr("Preferences"), tr("Edit preferences"),
360 QIcon(":pictures/preferences.png"), QKeySequence::Preferences);
361 aCommand->connectTo(this, SLOT(onPreferences()));
363 aCommand = aGroup->addFeature("EXIT_CMD", tr("Exit"), tr("Exit application"),
364 QIcon(":pictures/close.png"), QKeySequence::Close);
365 aCommand->connectTo(this, SLOT(onExit()));
370 AppElements_Workbench* XGUI_Workshop::addWorkbench(const QString& theName)
372 AppElements_MainMenu* aMenuBar = myMainWindow->menuObject();
373 return aMenuBar->addWorkbench(theName);
377 //******************************************************
378 QMainWindow* XGUI_Workshop::desktop() const
381 return salomeConnector()->desktop();
387 //******************************************************
388 void XGUI_Workshop::onStartWaiting()
390 if (Events_LongOp::isPerformed()) {
391 QApplication::setOverrideCursor(QCursor(Qt::WaitCursor));
395 //******************************************************
396 void XGUI_Workshop::onAcceptActionClicked()
398 QAction* anAction = dynamic_cast<QAction*>(sender());
399 XGUI_OperationMgr* anOperationMgr = operationMgr();
400 if (anOperationMgr) {
401 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
402 (anOperationMgr->currentOperation());
404 //if (errorMgr()->canProcessClick(anAction, aFOperation->feature()))
405 myOperationMgr->onCommitOperation();
410 //******************************************************
411 void XGUI_Workshop::onPreivewActionClicked()
413 std::shared_ptr<Events_Message> aMsg = std::shared_ptr<Events_Message>(
414 new Events_Message(Events_Loop::eventByName(EVENT_PREVIEW_REQUESTED)));
415 Events_Loop::loop()->send(aMsg);
418 //******************************************************
419 void XGUI_Workshop::deactivateActiveObject(const ObjectPtr& theObject, const bool theUpdateViewer)
421 if (!myModule->canActivateSelection(theObject)) {
422 if (myDisplayer->isActive(theObject)) {
423 QObjectPtrList anObjects;
424 anObjects.append(theObject);
425 myDisplayer->deactivateObjects(anObjects, theUpdateViewer);
430 //******************************************************
431 bool XGUI_Workshop::isFeatureOfNested(const FeaturePtr& theFeature)
433 bool aHasNested = false;
434 std::string aFeatureKind = theFeature->getKind();
436 XGUI_SalomeConnector* aSalomeConnector = salomeConnector();
437 if (aSalomeConnector->isFeatureOfNested(actionsMgr()->action(aFeatureKind.c_str())))
440 AppElements_MainMenu* aMenuBar = mainWindow()->menuObject();
441 AppElements_Command* aCommand = aMenuBar->feature(aFeatureKind.c_str());
442 if (aCommand && aCommand->button()->additionalButtonWidget())
448 void XGUI_Workshop::setPropertyPanel(ModuleBase_Operation* theOperation)
450 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
455 myPropertyPanel->cleanContent();
457 QList<ModuleBase_ModelWidget*> aWidgets;
458 if (!module()->createWidgets(theOperation, aWidgets)) {
459 QString aXmlRepr = aFOperation->getDescription()->xmlRepresentation();
460 ModuleBase_WidgetFactory aFactory(aXmlRepr.toStdString(), myModuleConnector);
461 aFactory.createWidget(myPropertyPanel->contentWidget());
462 aWidgets = aFactory.getModelWidgets();
465 // check compatibility of feature and widgets
466 FeaturePtr aFeature = aFOperation->feature();
467 std::string aFeatureKind = aFeature->getKind();
468 foreach (ModuleBase_ModelWidget* aWidget, aWidgets) {
469 if (!aWidget->attributeID().empty() && !aFeature->attribute(aWidget->attributeID()).get()) {
470 std::string anErrorMsg = "The feature '" + aFeatureKind + "' has no attribute '"
471 + aWidget->attributeID() + "' used by widget '"
472 + aWidget->metaObject()->className() + "'.";
473 Events_Error::send(anErrorMsg);
474 myPropertyPanel->cleanContent();
478 foreach (ModuleBase_ModelWidget* aWidget, aWidgets) {
479 bool isStoreValue = !aFOperation->isEditOperation() &&
480 !aWidget->getDefaultValue().empty() &&
481 !aWidget->isComputedDefault();
482 aWidget->setFeature(aFeature, isStoreValue);
483 aWidget->enableFocusProcessing();
486 // update visible state of Preview button
488 bool anIsAutoPreview = true;//mySalomeConnector->featureInfo(aFeatureKind)->isAutoPreview();
490 AppElements_MainMenu* aMenuBar = mainWindow()->menuObject();
491 AppElements_Command* aCommand = aMenuBar->feature(aFeatureKind.c_str());
492 bool anIsAutoPreview = aCommand && aCommand->isAutoPreview();
494 if (!anIsAutoPreview) {
495 myPropertyPanel->findButton(PROP_PANEL_PREVIEW)->setVisible(true);
496 // send signal about preview should not be computed automatically, click on preview
497 // button should initiate it
498 std::shared_ptr<Events_Message> aMsg = std::shared_ptr<Events_Message>(
499 new Events_Message(Events_Loop::eventByName(EVENT_PREVIEW_BLOCKED)));
500 Events_Loop::loop()->send(aMsg);
502 myPropertyPanel->setModelWidgets(aWidgets);
503 aFOperation->setPropertyPanel(myPropertyPanel);
505 myModule->propertyPanelDefined(theOperation);
507 #ifndef DEBUG_FEATURE_NAME
508 myPropertyPanel->setWindowTitle(theOperation->getDescription()->description());
510 std::string aFeatureName = aFeature->name();
511 myPropertyPanel->setWindowTitle(QString("%1: %2").arg(theOperation->getDescription()->description())
512 .arg(aFeatureName.c_str()));
515 myErrorMgr->setPropertyPanel(myPropertyPanel);
518 void XGUI_Workshop::connectToPropertyPanel(const bool isToConnect)
520 XGUI_PropertyPanel* aPropertyPanel = propertyPanel();
521 if (aPropertyPanel) {
522 const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
523 foreach (ModuleBase_ModelWidget* aWidget, aWidgets) {
524 myModule->connectToPropertyPanel(aWidget, isToConnect);
526 connect(aWidget, SIGNAL(valueStateChanged(int)), this, SLOT(onWidgetStateChanged(int)));
527 connect(aWidget, SIGNAL(valuesChanged()), this, SLOT(onValuesChanged()));
530 disconnect(aWidget, SIGNAL(valueStateChanged(int)), this, SLOT(onWidgetStateChanged(int)));
531 disconnect(aWidget, SIGNAL(valuesChanged()), this, SLOT(onValuesChanged()));
537 //******************************************************
538 void XGUI_Workshop::onOperationStarted(ModuleBase_Operation* theOperation)
540 setGrantedFeatures(theOperation);
541 myModule->operationStarted(theOperation);
544 //******************************************************
545 void XGUI_Workshop::onOperationResumed(ModuleBase_Operation* theOperation)
547 setGrantedFeatures(theOperation);
549 if (theOperation->getDescription()->hasXmlRepresentation()) { //!< No need for property panel
550 setPropertyPanel(theOperation);
551 connectToPropertyPanel(true);
553 updateCommandStatus();
555 myModule->operationResumed(theOperation);
559 //******************************************************
560 void XGUI_Workshop::onOperationStopped(ModuleBase_Operation* theOperation)
562 updateCommandStatus();
564 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
569 ModuleBase_ISelection* aSel = mySelector->selection();
570 QObjectPtrList aObj = aSel->selectedPresentations();
571 //!< No need for property panel
573 myPropertyPanel->cleanContent();
575 connectToPropertyPanel(false);
576 myModule->operationStopped(aFOperation);
578 // the deactivated objects of the current operation should be activated back.
579 // They were deactivated on operation start or an object redisplay
580 QObjectPtrList anObjects;
581 FeaturePtr aFeature = aFOperation->feature();
582 if (aFeature.get()) { // feature may be not created (plugin load fail)
583 if (myDisplayer->isVisible(aFeature) && !myDisplayer->isActive(aFeature))
584 anObjects.append(aFeature);
585 std::list<ResultPtr> aResults = aFeature->results();
586 std::list<ResultPtr>::const_iterator aIt;
587 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
588 ResultPtr anObject = *aIt;
589 if (myDisplayer->isVisible(anObject) && !myDisplayer->isActive(anObject)) {
590 anObjects.append(anObject);
594 activateObjectsSelection(anObjects);
598 void XGUI_Workshop::onOperationCommitted(ModuleBase_Operation* theOperation)
600 myModule->operationCommitted(theOperation);
603 void XGUI_Workshop::onOperationAborted(ModuleBase_Operation* theOperation)
605 myModule->operationAborted(theOperation);
608 void XGUI_Workshop::setGrantedFeatures(ModuleBase_Operation* theOperation)
610 ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
614 QStringList aGrantedIds;
616 aGrantedIds = mySalomeConnector->nestedActions(theOperation->id());
618 aGrantedIds = myActionsMgr->nestedCommands(theOperation->id());
620 ModuleBase_IModule* aModule = module();
622 aModule->grantedOperationIds(theOperation, aGrantedIds);
624 aFOperation->setGrantedOperationIds(aGrantedIds);
629 * Saves document with given name.
631 void XGUI_Workshop::saveDocument(const QString& theName, std::list<std::string>& theFileNames)
633 QApplication::restoreOverrideCursor();
634 SessionPtr aMgr = ModelAPI_Session::get();
635 aMgr->save(theName.toLatin1().constData(), theFileNames);
636 QApplication::restoreOverrideCursor();
639 bool XGUI_Workshop::abortAllOperations()
641 return myOperationMgr->abortAllOperations();
644 //******************************************************
645 void XGUI_Workshop::onOpen()
647 if(!abortAllOperations())
649 //save current file before close if modified
650 SessionPtr aSession = ModelAPI_Session::get();
651 if (aSession->isModified()) {
652 //TODO(sbh): re-launch the app?
653 int anAnswer = QMessageBox::question(
654 desktop(), tr("Save current file"),
655 tr("The document is modified, save before opening another?"),
656 QMessageBox::Save | QMessageBox::Discard | QMessageBox::Cancel, QMessageBox::Cancel);
657 if (anAnswer == QMessageBox::Save) {
659 } else if (anAnswer == QMessageBox::Cancel) {
665 //show file dialog, check if readable and open
666 myCurrentDir = QFileDialog::getExistingDirectory(desktop(), tr("Select directory"));
667 if (myCurrentDir.isEmpty())
669 QFileInfo aFileInfo(myCurrentDir);
670 if (!aFileInfo.exists() || !aFileInfo.isReadable()) {
671 QMessageBox::critical(desktop(), tr("Warning"), tr("Unable to open the file."));
675 QApplication::setOverrideCursor(Qt::WaitCursor);
676 aSession->closeAll();
677 aSession->load(myCurrentDir.toLatin1().constData());
678 myObjectBrowser->rebuildDataTree();
679 updateCommandStatus();
680 QApplication::restoreOverrideCursor();
683 //******************************************************
684 void XGUI_Workshop::onNew()
686 QApplication::setOverrideCursor(Qt::WaitCursor);
687 if (objectBrowser() == 0) {
689 mySelector->connectViewers();
691 myViewerProxy->connectToViewer();
694 myMainWindow->showPythonConsole();
695 QMdiSubWindow* aWnd = myMainWindow->viewer()->createView();
696 aWnd->showMaximized();
697 updateCommandStatus();
699 myContextMenuMgr->connectViewer();
700 QApplication::restoreOverrideCursor();
704 //******************************************************
705 void XGUI_Workshop::onExit()
707 SessionPtr aMgr = ModelAPI_Session::get();
708 if (aMgr->isModified()) {
709 int anAnswer = QMessageBox::question(
710 myMainWindow, tr("Save current file"), tr("The document is modified, save before exit?"),
711 QMessageBox::Save | QMessageBox::Discard | QMessageBox::Cancel, QMessageBox::Cancel);
712 if (anAnswer == QMessageBox::Save) {
713 bool saved = onSave();
717 } else if (anAnswer == QMessageBox::Cancel) {
724 //******************************************************
725 void XGUI_Workshop::onPreferences()
727 ModuleBase_Prefs aModif;
728 ModuleBase_Preferences::editPreferences(aModif);
729 if (aModif.size() > 0) {
731 foreach (ModuleBase_Pref aPref, aModif)
733 aSection = aPref.first;
734 if (aSection == ModuleBase_Preferences::VIEWER_SECTION) {
735 myMainWindow->viewer()->updateFromResources();
736 } else if (aSection == ModuleBase_Preferences::MENU_SECTION) {
737 myMainWindow->menuObject()->updateFromResources();
740 displayer()->redisplayObjects();
745 //******************************************************
746 void XGUI_Workshop::onTrihedronVisibilityChanged(bool theState)
748 XGUI_Displayer* aDisplayer = displayer();
750 aDisplayer->displayTrihedron(theState);
753 //******************************************************
754 bool XGUI_Workshop::onSave()
756 if(!abortAllOperations())
758 if (myCurrentDir.isEmpty()) {
761 std::list<std::string> aFiles;
762 saveDocument(myCurrentDir, aFiles);
763 updateCommandStatus();
765 myMainWindow->setModifiedState(false);
770 //******************************************************
771 bool XGUI_Workshop::onSaveAs()
773 if(!abortAllOperations())
775 QFileDialog dialog(desktop());
776 dialog.setWindowTitle(tr("Select directory to save files..."));
777 dialog.setFileMode(QFileDialog::Directory);
778 dialog.setFilter(tr("Directories (*)"));
779 dialog.setOptions(QFileDialog::HideNameFilterDetails | QFileDialog::ShowDirsOnly);
780 dialog.setViewMode(QFileDialog::Detail);
782 if (!dialog.exec()) {
786 QString aTempDir = dialog.selectedFiles().first();
788 if (aDir.exists() && !aDir.entryInfoList(QDir::NoDotAndDotDot | QDir::AllEntries).isEmpty()) {
789 int answer = QMessageBox::question(
791 //: Title of the dialog which asks user if he wants to save study in existing non-empty folder
793 tr("The directory already contains some files, save anyway?"),
794 QMessageBox::Save | QMessageBox::Cancel);
795 if (answer == QMessageBox::Cancel) {
799 myCurrentDir = aTempDir;
801 myMainWindow->setCurrentDir(myCurrentDir, false);
802 myMainWindow->setModifiedState(false);
807 //******************************************************
808 void XGUI_Workshop::onUndo(int theTimes)
810 objectBrowser()->treeView()->setCurrentIndex(QModelIndex());
811 SessionPtr aMgr = ModelAPI_Session::get();
812 std::list<std::string> aUndoList = aMgr->undoList();
813 if (aMgr->isOperation()) {
814 /// this is important for nested operations
815 /// when sketch operation is active, this condition is false and
816 /// the sketch operation is not aborted
817 operationMgr()->onAbortOperation();
819 std::list<std::string>::const_iterator aIt = aUndoList.cbegin();
820 for (int i = 0; (i < theTimes) && (aIt != aUndoList.cend()); ++i, ++aIt) {
822 if (QString((*aIt).c_str()) == MOVE_TO_END_COMMAND)
823 myObjectBrowser->rebuildDataTree();
826 operationMgr()->updateApplyOfOperations();
827 updateCommandStatus();
830 //******************************************************
831 void XGUI_Workshop::onRedo(int theTimes)
833 // the viewer update should be blocked in order to avoid the features blinking. For the created
834 // feature a results are created, the flush of the created signal caused the viewer redisplay for
835 // each created result. After a redisplay signal is flushed. So, the viewer update is blocked until
836 // redo of all possible objects happens
837 bool isUpdateEnabled = myDisplayer->enableUpdateViewer(false);
839 objectBrowser()->treeView()->setCurrentIndex(QModelIndex());
840 SessionPtr aMgr = ModelAPI_Session::get();
841 std::list<std::string> aRedoList = aMgr->redoList();
842 if (aMgr->isOperation()) {
843 /// this is important for nested operations
844 /// when sketch operation is active, this condition is false and
845 /// the sketch operation is not aborted
846 operationMgr()->onAbortOperation();
848 std::list<std::string>::const_iterator aIt = aRedoList.cbegin();
849 for (int i = 0; (i < theTimes) && (aIt != aRedoList.cend()); ++i, ++aIt) {
851 if (QString((*aIt).c_str()) == MOVE_TO_END_COMMAND)
852 myObjectBrowser->rebuildDataTree();
854 operationMgr()->updateApplyOfOperations();
855 updateCommandStatus();
857 // unblock the viewer update functionality and make update on purpose
858 myDisplayer->enableUpdateViewer(isUpdateEnabled);
859 myDisplayer->updateViewer();
862 //******************************************************
863 //void XGUI_Workshop::onRebuild()
865 // SessionPtr aMgr = ModelAPI_Session::get();
866 // bool aWasOperation = aMgr->isOperation(); // keep this value
867 // if (!aWasOperation) {
868 // aMgr->startOperation("Rebuild");
870 // static const Events_ID aRebuildEvent = Events_Loop::loop()->eventByName("Rebuild");
871 // Events_Loop::loop()->send(std::shared_ptr<Events_Message>(
872 // new Events_Message(aRebuildEvent, this)));
873 // if (!aWasOperation) {
874 // aMgr->finishOperation();
876 // updateCommandStatus();
879 //******************************************************
880 void XGUI_Workshop::onWidgetStateChanged(int thePreviousState)
882 ModuleBase_ModelWidget* anActiveWidget = 0;
883 ModuleBase_Operation* anOperation = myOperationMgr->currentOperation();
885 ModuleBase_IPropertyPanel* aPanel = anOperation->propertyPanel();
887 anActiveWidget = aPanel->activeWidget();
890 operationMgr()->onValidateOperation();
892 myModule->widgetStateChanged(thePreviousState);
895 //******************************************************
896 void XGUI_Workshop::onValuesChanged()
898 ModuleBase_ModelWidget* aSenderWidget = (ModuleBase_ModelWidget*)(sender());
899 if (!aSenderWidget || aSenderWidget->canAcceptFocus())
902 ModuleBase_ModelWidget* anActiveWidget = 0;
903 ModuleBase_Operation* anOperation = myOperationMgr->currentOperation();
905 ModuleBase_IPropertyPanel* aPanel = anOperation->propertyPanel();
907 anActiveWidget = aPanel->activeWidget();
909 if (anActiveWidget) {
910 ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
912 if (aWidgetValidated)
913 aWidgetValidated->clearValidatedCash();
917 ModuleBase_IModule* XGUI_Workshop::loadModule(const QString& theModule)
919 QString libName = QString::fromStdString(library(theModule.toStdString()));
920 if (libName.isEmpty()) {
921 qWarning(qPrintable(tr("Information about module \"%1\" doesn't exist.").arg(theModule)));
926 CREATE_FUNC crtInst = 0;
929 HINSTANCE modLib = ::LoadLibrary((LPTSTR) qPrintable(libName));
933 FORMAT_MESSAGE_ALLOCATE_BUFFER | FORMAT_MESSAGE_FROM_SYSTEM | FORMAT_MESSAGE_IGNORE_INSERTS,
934 0, ::GetLastError(), 0, (LPTSTR) & lpMsgBuf, 0, 0);
935 QString aMsg((char*) &lpMsgBuf);
936 err = QString("Failed to load %1. %2").arg(libName).arg(aMsg);
937 ::LocalFree(lpMsgBuf);
939 crtInst = (CREATE_FUNC) ::GetProcAddress(modLib, CREATE_MODULE);
943 FORMAT_MESSAGE_ALLOCATE_BUFFER | FORMAT_MESSAGE_FROM_SYSTEM
944 | FORMAT_MESSAGE_IGNORE_INSERTS,
945 0, ::GetLastError(), 0, (LPTSTR) & lpMsgBuf, 0, 0);
946 QString aMsg((char*) &lpMsgBuf);
947 err = QString("Failed to find %1 function. %2").arg( CREATE_MODULE).arg(aMsg);
948 ::LocalFree(lpMsgBuf);
952 void* modLib = dlopen( libName.toLatin1(), RTLD_LAZY | RTLD_GLOBAL );
954 err = QString( "Can not load library %1. %2" ).arg( libName ).arg( dlerror() );
956 crtInst = (CREATE_FUNC)dlsym( modLib, CREATE_MODULE );
958 err = QString( "Failed to find function %1. %2" ).arg( CREATE_MODULE ).arg( dlerror() );
963 ModuleBase_IModule* aModule = crtInst ? crtInst(myModuleConnector) : 0;
965 if (!err.isEmpty()) {
967 Events_Error::send(err.toStdString());
969 qWarning(qPrintable(err));
975 //******************************************************
976 bool XGUI_Workshop::createModule()
978 Config_ModuleReader aModuleReader;
979 QString moduleName = QString::fromStdString(aModuleReader.getModuleName());
980 myModule = loadModule(moduleName);
984 //connect(myDisplayer, SIGNAL(objectDisplayed(ObjectPtr, AISObjectPtr)),
985 // myModule, SLOT(onObjectDisplayed(ObjectPtr, AISObjectPtr)));
986 //connect(myDisplayer, SIGNAL(beforeObjectErase(ObjectPtr, AISObjectPtr)),
987 // myModule, SLOT(onBeforeObjectErase(ObjectPtr, AISObjectPtr)));
989 myModule->createFeatures();
990 //myActionsMgr->update();
994 //******************************************************
995 void XGUI_Workshop::updateCommandStatus()
997 QList<QAction*> aCommands;
999 aCommands = salomeConnector()->commandList();
1001 AppElements_MainMenu* aMenuBar = myMainWindow->menuObject();
1002 foreach (AppElements_Command* aCmd, aMenuBar->features())
1003 aCommands.append(aCmd);
1005 SessionPtr aMgr = ModelAPI_Session::get();
1006 if (aMgr->hasModuleDocument()) {
1007 foreach(QAction* aCmd, aCommands) {
1008 QString aId = aCmd->data().toString();
1009 if (aId == "UNDO_CMD")
1010 aCmd->setEnabled(myModule->canUndo());
1011 else if (aId == "REDO_CMD")
1012 aCmd->setEnabled(myModule->canRedo());
1014 // Enable all commands
1015 aCmd->setEnabled(true);
1019 foreach(QAction* aCmd, aCommands) {
1020 QString aId = aCmd->data().toString();
1021 if (aId == "NEW_CMD")
1022 aCmd->setEnabled(true);
1023 else if (aId == "EXIT_CMD")
1024 aCmd->setEnabled(true);
1026 aCmd->setEnabled(false);
1029 myActionsMgr->updateCommandsStatus();
1030 emit commandStatusUpdated();
1033 void XGUI_Workshop::updateHistory()
1035 std::list<std::string> aUndoList = ModelAPI_Session::get()->undoList();
1036 QList<ActionInfo> aUndoRes = processHistoryList(aUndoList);
1037 emit updateUndoHistory(aUndoRes);
1039 std::list<std::string> aRedoList = ModelAPI_Session::get()->redoList();
1040 QList<ActionInfo> aRedoRes = processHistoryList(aRedoList);
1041 emit updateRedoHistory(aRedoRes);
1044 //******************************************************
1045 QDockWidget* XGUI_Workshop::createObjectBrowser(QWidget* theParent)
1047 QDockWidget* aObjDock = new QDockWidget(theParent);
1048 aObjDock->setAllowedAreas(Qt::LeftDockWidgetArea | Qt::RightDockWidgetArea | Qt::BottomDockWidgetArea);
1049 aObjDock->setWindowTitle(tr("Object browser"));
1050 aObjDock->setStyleSheet(
1051 "::title { position: relative; padding-left: 5px; text-align: left center }");
1052 myObjectBrowser = new XGUI_ObjectsBrowser(aObjDock);
1053 myModule->customizeObjectBrowser(myObjectBrowser);
1054 aObjDock->setWidget(myObjectBrowser);
1056 myContextMenuMgr->connectObjectBrowser();
1060 //******************************************************
1062 * Creates dock widgets, places them in corresponding area
1063 * and tabifies if necessary.
1065 void XGUI_Workshop::createDockWidgets()
1067 QMainWindow* aDesktop = desktop();
1068 QDockWidget* aObjDock = createObjectBrowser(aDesktop);
1069 aDesktop->addDockWidget(Qt::LeftDockWidgetArea, aObjDock);
1070 myPropertyPanel = new XGUI_PropertyPanel(aDesktop, myOperationMgr);
1071 myPropertyPanel->setupActions(myActionsMgr);
1072 myPropertyPanel->setAllowedAreas(Qt::LeftDockWidgetArea | Qt::RightDockWidgetArea | Qt::BottomDockWidgetArea);
1073 aDesktop->addDockWidget(Qt::LeftDockWidgetArea, myPropertyPanel);
1074 hidePropertyPanel(); ///<! Invisible by default
1075 hideObjectBrowser();
1076 aDesktop->tabifyDockWidget(aObjDock, myPropertyPanel);
1077 myPropertyPanel->installEventFilter(myOperationMgr);
1079 QAction* aOkAct = myActionsMgr->operationStateAction(XGUI_ActionsMgr::Accept);
1080 connect(aOkAct, SIGNAL(triggered()), this, SLOT(onAcceptActionClicked()));
1082 QAction* aCancelAct = myActionsMgr->operationStateAction(XGUI_ActionsMgr::Abort);
1083 connect(aCancelAct, SIGNAL(triggered()), myOperationMgr, SLOT(onAbortOperation()));
1085 QAction* aPreviewAct = myActionsMgr->operationStateAction(XGUI_ActionsMgr::Preview);
1086 connect(aPreviewAct, SIGNAL(triggered()), this, SLOT(onPreivewActionClicked()));
1088 connect(myPropertyPanel, SIGNAL(keyReleased(QObject*, QKeyEvent*)),
1089 myOperationMgr, SLOT(onKeyReleased(QObject*, QKeyEvent*)));
1090 connect(myPropertyPanel, SIGNAL(enterClicked(QObject*)),
1091 myOperationMgr, SLOT(onProcessEnter(QObject*)));
1094 //******************************************************
1095 void XGUI_Workshop::showPropertyPanel()
1097 QAction* aViewAct = myPropertyPanel->toggleViewAction();
1098 ///<! Restore ability to close panel from the window's menu
1099 aViewAct->setEnabled(true);
1100 myPropertyPanel->show();
1101 myPropertyPanel->raise();
1103 // The next code is necessary to made the property panel the active window
1104 // in order to operation manager could process key events of the panel.
1105 // otherwise they are ignored. It happens only if the same(activateWindow) is
1106 // not happened by property panel activation(e.g. resume operation of Sketch)
1107 ModuleBase_Tools::activateWindow(myPropertyPanel, "XGUI_Workshop::showPropertyPanel()");
1108 ModuleBase_Tools::setFocus(myPropertyPanel, "XGUI_Workshop::showPropertyPanel()");
1111 //******************************************************
1112 void XGUI_Workshop::hidePropertyPanel()
1114 QAction* aViewAct = myPropertyPanel->toggleViewAction();
1115 ///<! Do not allow to show empty property panel
1116 aViewAct->setEnabled(false);
1117 myPropertyPanel->hide();
1119 // the property panel is active window of the desktop, when it is
1120 // hidden, it is undefined which window becomes active. By this reason
1121 // it is defined to perform the desktop as the active window.
1122 // in SALOME mode, workstack made the PyConsole the active window,
1123 // set the focus on it. As a result, shortcuts of the application, like
1124 // are processed by this console. For example Undo actions.
1125 // It is possible that this code is to be moved to SHAPER package
1126 QMainWindow* aDesktop = desktop();
1127 ModuleBase_Tools::activateWindow(aDesktop, "XGUI_Workshop::hidePropertyPanel()");
1128 ModuleBase_Tools::setFocus(aDesktop, "XGUI_Workshop::showPropertyPanel()");
1131 //******************************************************
1132 void XGUI_Workshop::showObjectBrowser()
1134 if (!isSalomeMode())
1135 myObjectBrowser->parentWidget()->show();
1138 //******************************************************
1139 void XGUI_Workshop::hideObjectBrowser()
1141 if (!isSalomeMode())
1142 myObjectBrowser->parentWidget()->hide();
1145 //******************************************************
1146 void XGUI_Workshop::salomeViewerSelectionChanged()
1148 emit salomeViewerSelection();
1151 //**************************************************************
1152 ModuleBase_IViewer* XGUI_Workshop::salomeViewer() const
1154 return mySalomeConnector->viewer();
1157 //**************************************************************
1158 void XGUI_Workshop::onContextMenuCommand(const QString& theId, bool isChecked)
1160 QObjectPtrList aObjects = mySelector->selection()->selectedObjects();
1161 if (theId == "DELETE_CMD")
1163 else if (theId == "CLEAN_HISTORY_CMD")
1165 else if (theId == "MOVE_CMD")
1167 else if (theId == "COLOR_CMD")
1168 changeColor(aObjects);
1169 else if (theId == "SHOW_CMD") {
1170 showObjects(aObjects, true);
1171 mySelector->updateSelectionBy(ModuleBase_ISelection::Browser);
1173 else if (theId == "HIDE_CMD")
1174 showObjects(aObjects, false);
1175 else if (theId == "SHOW_ONLY_CMD") {
1176 showOnlyObjects(aObjects);
1177 mySelector->updateSelectionBy(ModuleBase_ISelection::Browser);
1179 else if (theId == "SHADING_CMD")
1180 setDisplayMode(aObjects, XGUI_Displayer::Shading);
1181 else if (theId == "WIREFRAME_CMD")
1182 setDisplayMode(aObjects, XGUI_Displayer::Wireframe);
1183 else if (theId == "HIDEALL_CMD") {
1184 QObjectPtrList aList = myDisplayer->displayedObjects();
1185 foreach (ObjectPtr aObj, aList) {
1186 if (module()->canEraseObject(aObj))
1187 aObj->setDisplayed(false);
1189 Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
1190 } else if (theId == "SELECT_VERTEX_CMD") {
1191 setViewerSelectionMode(TopAbs_VERTEX);
1192 } else if (theId == "SELECT_EDGE_CMD") {
1193 setViewerSelectionMode(TopAbs_EDGE);
1194 } else if (theId == "SELECT_FACE_CMD") {
1195 setViewerSelectionMode(TopAbs_FACE);
1196 } else if (theId == "SELECT_RESULT_CMD") {
1197 setViewerSelectionMode(-1);
1198 } else if (theId == "SHOW_RESULTS_CMD") {
1199 highlightResults(aObjects);
1203 //**************************************************************
1204 void XGUI_Workshop::setViewerSelectionMode(int theMode)
1206 myViewerSelMode = theMode;
1207 activateObjectsSelection(myDisplayer->displayedObjects());
1210 //**************************************************************
1211 void XGUI_Workshop::activateObjectsSelection(const QObjectPtrList& theList)
1214 module()->activeSelectionModes(aModes);
1215 if (aModes.isEmpty() && (myViewerSelMode != -1))
1216 aModes.append(myViewerSelMode);
1217 myDisplayer->activateObjects(aModes, theList);
1221 //**************************************************************
1222 void XGUI_Workshop::deleteObjects()
1224 ModuleBase_IModule* aModule = module();
1225 // 1. allow the module to delete objects, do nothing if it has succeed
1226 if (aModule->deleteObjects()) {
1227 updateCommandStatus();
1231 QObjectPtrList anObjects = mySelector->selection()->selectedObjects();
1232 if (!abortAllOperations())
1234 // check whether the object can be deleted. There should not be parts which are not loaded
1235 if (!XGUI_Tools::canRemoveOrRename(desktop(), anObjects))
1238 bool hasResult = false;
1239 bool hasFeature = false;
1240 bool hasParameter = false;
1241 bool hasCompositeOwner = false;
1242 ModuleBase_Tools::checkObjects(anObjects, hasResult, hasFeature, hasParameter, hasCompositeOwner);
1243 if (!(hasFeature || hasParameter))
1246 // 3. delete objects
1247 std::set<FeaturePtr> anIgnoredFeatures;
1248 std::set<FeaturePtr> aDirectRefFeatures, aIndirectRefFeatures;
1249 findReferences(anObjects, aDirectRefFeatures, aIndirectRefFeatures);
1251 bool doDeleteReferences = true;
1252 if (isDeleteFeatureWithReferences(anObjects, aDirectRefFeatures, aIndirectRefFeatures,
1253 desktop(), doDeleteReferences)) {
1255 QString aDescription = contextMenuMgr()->action("DELETE_CMD")->text();
1256 aDescription += " " + aDescription.arg(XGUI_Tools::unionOfObjectNames(anObjects, ", "));
1257 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, module());
1258 operationMgr()->startOperation(anOpAction);
1260 // WORKAROUND, should be done before each object remove, if it presents in XGUI_DataModel tree
1261 // It is necessary to clear selection in order to avoid selection changed event during
1262 // deletion and negative consequences connected with processing of already deleted items
1263 mySelector->clearSelection();
1265 // delete and commit/abort operation in model
1266 if (deleteFeaturesInternal(anObjects, aDirectRefFeatures, aIndirectRefFeatures,
1267 anIgnoredFeatures, doDeleteReferences))
1268 operationMgr()->commitOperation();
1270 operationMgr()->abortOperation(operationMgr()->currentOperation());
1274 //**************************************************************
1275 void XGUI_Workshop::cleanHistory()
1277 if (!abortAllOperations())
1280 QObjectPtrList anObjects = mySelector->selection()->selectedObjects();
1281 QObjectPtrList aFeatures;
1282 foreach (ObjectPtr anObject, anObjects) {
1283 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(anObject);
1284 // for parameter result, use the corresponded reature to be removed
1285 if (!aFeature.get() && anObject->groupName() == ModelAPI_ResultParameter::group()) {
1286 aFeature = ModelAPI_Feature::feature(anObject);
1288 aFeatures.append(aFeature);
1291 // 1. find all referenced features
1292 QList<ObjectPtr> anUnusedObjects;
1293 std::set<FeaturePtr> aDirectRefFeatures;
1294 //foreach (ObjectPtr anObject, anObjects) {
1295 foreach (ObjectPtr anObject, aFeatures) {
1296 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(anObject);
1297 // for parameter result, use the corresponded reature to be removed
1298 //if (!aFeature.get() && anObject->groupName() == ModelAPI_ResultParameter::group()) {
1299 // aFeature = ModelAPI_Feature::feature(anObject);
1301 if (aFeature.get()) {
1302 std::set<FeaturePtr> alreadyProcessed;
1303 aDirectRefFeatures.clear();
1304 XGUI_Tools::refsDirectToFeatureInAllDocuments(aFeature, aFeature, aFeatures,
1305 aDirectRefFeatures, alreadyProcessed);
1306 if (aDirectRefFeatures.empty() && !anUnusedObjects.contains(aFeature))
1307 anUnusedObjects.append(aFeature);
1311 // 2. warn about the references remove, break the delete operation if the user chose it
1312 if (!anUnusedObjects.empty()) {
1314 foreach (const ObjectPtr& anObject, anUnusedObjects) {
1315 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(anObject);
1316 aNames.append(aFeature->name().c_str());
1318 QString anUnusedNames = aNames.join(", ");
1320 QString anActionId = "CLEAN_HISTORY_CMD";
1321 QString aDescription = contextMenuMgr()->action(anActionId)->text();
1323 QMessageBox aMessageBox(desktop());
1324 aMessageBox.setWindowTitle(aDescription);
1325 aMessageBox.setIcon(QMessageBox::Warning);
1326 aMessageBox.setStandardButtons(QMessageBox::No | QMessageBox::Yes);
1327 aMessageBox.setDefaultButton(QMessageBox::No);
1329 QString aText = QString(tr("Unused features are the following: %1.\nThese features will be deleted.\nWould you like to continue?")
1330 .arg(anUnusedNames));
1332 if (anUnusedNames.isEmpty()) {
1333 aMessageBox.setStandardButtons(QMessageBox::Ok);
1334 aMessageBox.setDefaultButton(QMessageBox::Ok);
1336 aText = QString(tr("All features are relevant, there is nothing to be deleted"));
1339 aMessageBox.setStandardButtons(QMessageBox::No | QMessageBox::Yes);
1340 aMessageBox.setDefaultButton(QMessageBox::No);
1342 aText = QString(tr("Unused features are the following: %1.\nThese features will be deleted.\nWould you like to continue?")
1343 .arg(anUnusedNames));
1346 aMessageBox.setText(aText);
1347 if (aMessageBox.exec() == QMessageBox::No)
1350 // 1. start operation
1351 aDescription += "by deleting of " + aDescription.arg(XGUI_Tools::unionOfObjectNames(anObjects, ", "));
1352 ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, module());
1353 operationMgr()->startOperation(anOpAction);
1355 // WORKAROUND, should be done before each object remove, if it presents in XGUI_DataModel tree
1356 // It is necessary to clear selection in order to avoid selection changed event during
1357 // deletion and negative consequences connected with processing of already deleted items
1358 mySelector->clearSelection();
1360 std::set<FeaturePtr> anIgnoredFeatures;
1361 if (removeFeatures(anUnusedObjects, anIgnoredFeatures, anActionId)) {
1362 operationMgr()->commitOperation();
1365 operationMgr()->abortOperation(operationMgr()->currentOperation());
1369 QString anActionId = "CLEAN_HISTORY_CMD";
1370 QString aDescription = contextMenuMgr()->action(anActionId)->text();
1372 QMessageBox aMessageBox(desktop());
1373 aMessageBox.setWindowTitle(aDescription);
1374 aMessageBox.setIcon(QMessageBox::Warning);
1375 aMessageBox.setStandardButtons(QMessageBox::No | QMessageBox::Yes);
1376 aMessageBox.setDefaultButton(QMessageBox::No);
1379 aMessageBox.setStandardButtons(QMessageBox::Ok);
1380 aMessageBox.setDefaultButton(QMessageBox::Ok);
1382 aText = QString(tr("All features are relevant, there is nothing to be deleted"));
1383 aMessageBox.setText(aText);
1385 if (aMessageBox.exec() == QMessageBox::No)
1390 //**************************************************************
1391 void XGUI_Workshop::moveObjects()
1393 if (!abortAllOperations())
1396 SessionPtr aMgr = ModelAPI_Session::get();
1398 QString anActionId = "MOVE_CMD";
1399 QString aDescription = contextMenuMgr()->action(anActionId)->text();
1400 aMgr->startOperation(aDescription.toStdString());
1402 QObjectPtrList anObjects = mySelector->selection()->selectedObjects();
1403 // It is necessary to clear selection in order to avoid selection changed event during
1404 // moving and negative consequences connected with processing of already moved items
1405 mySelector->clearSelection();
1406 // check whether the object can be moved. There should not be parts which are not loaded
1407 if (!XGUI_Tools::canRemoveOrRename(desktop(), anObjects))
1410 DocumentPtr anActiveDocument = aMgr->activeDocument();
1411 FeaturePtr aCurrentFeature = anActiveDocument->currentFeature(true);
1412 foreach (ObjectPtr aObject, anObjects) {
1413 if (!myModule->canApplyAction(aObject, anActionId))
1416 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1417 if (aFeature.get()) {
1418 anActiveDocument->moveFeature(aFeature, aCurrentFeature);
1419 aCurrentFeature = anActiveDocument->currentFeature(true);
1422 aMgr->finishOperation();
1425 //**************************************************************
1426 void XGUI_Workshop::findReferences(const QObjectPtrList& theList,
1427 std::set<FeaturePtr>& aDirectRefFeatures,
1428 std::set<FeaturePtr>& aIndirectRefFeatures)
1430 foreach (ObjectPtr aDeletedObj, theList) {
1431 std::set<FeaturePtr> alreadyProcessed;
1432 XGUI_Tools::refsToFeatureInAllDocuments(aDeletedObj, aDeletedObj, theList, aDirectRefFeatures,
1433 aIndirectRefFeatures, alreadyProcessed);
1434 std::set<FeaturePtr> aDifference;
1435 std::set_difference(aIndirectRefFeatures.begin(), aIndirectRefFeatures.end(),
1436 aDirectRefFeatures.begin(), aDirectRefFeatures.end(),
1437 std::inserter(aDifference, aDifference.begin()));
1438 aIndirectRefFeatures = aDifference;
1442 bool XGUI_Workshop::isDeleteFeatureWithReferences(const QObjectPtrList& theList,
1443 const std::set<FeaturePtr>& aDirectRefFeatures,
1444 const std::set<FeaturePtr>& aIndirectRefFeatures,
1446 bool& doDeleteReferences)
1448 doDeleteReferences = true;
1450 QString aDirectNames, aIndirectNames;
1451 if (!aDirectRefFeatures.empty()) {
1452 QStringList aDirectRefNames;
1453 foreach (const FeaturePtr& aFeature, aDirectRefFeatures)
1454 aDirectRefNames.append(aFeature->name().c_str());
1455 aDirectNames = aDirectRefNames.join(", ");
1457 QStringList aIndirectRefNames;
1458 foreach (const FeaturePtr& aFeature, aIndirectRefFeatures)
1459 aIndirectRefNames.append(aFeature->name().c_str());
1460 aIndirectNames = aIndirectRefNames.join(", ");
1463 bool aCanReplaceParameters = !aDirectRefFeatures.empty();
1464 QStringList aPartFeatureNames;
1465 foreach (ObjectPtr aObj, theList) {
1466 FeaturePtr aFeature = ModelAPI_Feature::feature(aObj);
1467 // invalid feature data means that the feature is already removed in model,
1468 // we needn't process it. E.g. delete of feature from create operation. The operation abort
1469 // will delete the operation
1470 if (!aFeature->data()->isValid())
1472 ResultPtr aFirstResult = aFeature->firstResult();
1473 if (!aFirstResult.get())
1475 std::string aResultGroupName = aFirstResult->groupName();
1476 if (aResultGroupName == ModelAPI_ResultPart::group())
1477 aPartFeatureNames.append(aFeature->name().c_str());
1479 if (aCanReplaceParameters && aResultGroupName != ModelAPI_ResultParameter::group())
1480 aCanReplaceParameters = false;
1482 QString aPartNames = aPartFeatureNames.join(", ");
1484 QMessageBox aMessageBox(theParent);
1485 aMessageBox.setWindowTitle(tr("Delete features"));
1486 aMessageBox.setIcon(QMessageBox::Warning);
1487 aMessageBox.setStandardButtons(QMessageBox::No | QMessageBox::Yes);
1488 aMessageBox.setDefaultButton(QMessageBox::No);
1491 if (!aDirectNames.isEmpty() || !aIndirectNames.isEmpty()) {
1492 if (aCanReplaceParameters) {
1493 aText = QString(tr("Selected parameters are used in the following features: %1.\nThese features will be deleted.\nOr parameters could be replaced by their values.\n")
1494 .arg(aDirectNames));
1495 if (!aIndirectNames.isEmpty())
1496 aText += QString(tr("(Also these features will be deleted: %1)\n")).arg(aIndirectNames);
1497 QPushButton *aReplaceButton = aMessageBox.addButton(tr("Replace"), QMessageBox::ActionRole);
1499 aText = QString(tr("Selected features are used in the following features: %1.\nThese features will be deleted.\n")).arg(aDirectNames);
1500 if (!aIndirectNames.isEmpty())
1501 aText += QString(tr("(Also these features will be deleted: %1)\n")).arg(aIndirectNames);
1504 if (!aPartNames.isEmpty())
1505 aText += QString(tr("The following parts will be deleted: %1.\n")).arg(aPartNames);
1507 if (!aText.isEmpty()) {
1508 aText += "Would you like to continue?";
1509 aMessageBox.setText(aText);
1511 QMessageBox::ButtonRole aButtonRole = aMessageBox.buttonRole(aMessageBox.clickedButton());
1513 if (aButtonRole == QMessageBox::NoRole)
1516 if (aButtonRole == QMessageBox::ActionRole) {
1517 foreach (ObjectPtr aObj, theList)
1518 ModelAPI_ReplaceParameterMessage::send(aObj, this);
1519 doDeleteReferences = false;
1525 bool XGUI_Workshop::deleteFeatures(const QObjectPtrList& theFeatures,
1526 const std::set<FeaturePtr>& theIgnoredFeatures)
1528 std::set<FeaturePtr> aDirectRefFeatures, aIndirectRefFeatures;
1529 findReferences(theFeatures, aDirectRefFeatures, aIndirectRefFeatures);
1530 return deleteFeaturesInternal(theFeatures, aDirectRefFeatures, aIndirectRefFeatures,
1531 theIgnoredFeatures);
1534 bool XGUI_Workshop::deleteFeaturesInternal(const QObjectPtrList& theList,
1535 const std::set<FeaturePtr>& aDirectRefFeatures,
1536 const std::set<FeaturePtr>& aIndirectRefFeatures,
1537 const std::set<FeaturePtr>& theIgnoredFeatures,
1538 const bool doDeleteReferences)
1540 if (doDeleteReferences) {
1541 std::set<FeaturePtr> aFeaturesToDelete = aDirectRefFeatures;
1542 aFeaturesToDelete.insert(aIndirectRefFeatures.begin(), aIndirectRefFeatures.end());
1543 std::set<FeaturePtr>::const_iterator anIt = aFeaturesToDelete.begin(),
1544 aLast = aFeaturesToDelete.end();
1548 for (; anIt != aLast; anIt++) {
1549 FeaturePtr aFeature = (*anIt);
1550 DocumentPtr aDoc = aFeature->document();
1551 if (theIgnoredFeatures.find(aFeature) == theIgnoredFeatures.end()) {
1552 aDoc->removeFeature(aFeature);
1554 anInfo.append(ModuleBase_Tools::objectInfo(aFeature).toStdString().c_str());
1559 qDebug(QString("remove references:%1").arg(anInfo.join("; ")).toStdString().c_str());
1564 QString anActionId = "DELETE_CMD";
1565 return removeFeatures(theList, theIgnoredFeatures, anActionId);
1568 //**************************************************************
1569 bool XGUI_Workshop::removeFeatures(const QObjectPtrList& theList,
1570 const std::set<FeaturePtr>& theIgnoredFeatures,
1571 const QString& theActionId)
1573 bool isDone = false;
1575 QString anId = QString::fromStdString(theActionId.toStdString().c_str());
1576 QStringList anObjectGroups = contextMenuMgr()->actionObjectGroups(anId);
1577 // 4. remove the parameter features
1578 foreach (ObjectPtr aObj, theList) {
1579 // features and parameters can be removed here,
1580 // the results are removed only by a corresponded feature remove
1581 std::string aGroupName = aObj->groupName();
1582 if (!anObjectGroups.contains(aGroupName.c_str()))
1585 FeaturePtr aFeature = ModelAPI_Feature::feature(aObj);
1587 /*// TODO: to learn the workshop to delegate the Part object deletion to the PartSet module
1588 // part features are removed in the PartSet module. This condition should be moved there
1589 if (aFeature->getKind() == "Part")
1592 DocumentPtr aDoc = aObj->document();
1593 if (theIgnoredFeatures.find(aFeature) == theIgnoredFeatures.end()) {
1595 QString anInfoStr = ModuleBase_Tools::objectInfo(aFeature);
1596 anInfo.append(anInfoStr);
1597 qDebug(QString("remove feature :%1").arg(anInfoStr).toStdString().c_str());
1599 aDoc->removeFeature(aFeature);
1605 qDebug(QString("remove features:%1").arg(anInfo.join("; ")).toStdString().c_str());
1610 bool hasResults(QObjectPtrList theObjects, const std::set<std::string>& theTypes)
1612 bool isFoundResultType = false;
1613 foreach(ObjectPtr anObj, theObjects)
1615 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObj);
1616 if (aResult.get() == NULL)
1619 isFoundResultType = theTypes.find(aResult->groupName()) != theTypes.end();
1620 if (isFoundResultType)
1623 return isFoundResultType;
1626 //**************************************************************
1627 // Returns the list of all features for theDocument and all features of
1628 // all nested parts.
1629 std::list<FeaturePtr> allFeatures(const DocumentPtr& theDocument)
1631 std::list<FeaturePtr> aResultList;
1632 std::list<FeaturePtr> anAllFeatures = theDocument->allFeatures();
1633 foreach (const FeaturePtr& aFeature, anAllFeatures) {
1634 // The order of appending features of the part and the part itself is important
1636 // Append features from a part feature
1637 foreach (const ResultPtr& aResult, aFeature->results()) {
1638 ResultPartPtr aResultPart =
1639 std::dynamic_pointer_cast<ModelAPI_ResultPart>(aResult);
1640 if (aResultPart.get() && aResultPart->partDoc().get()) {
1642 std::list<FeaturePtr> anAllFeatures = allFeatures(aResultPart->partDoc());
1643 aResultList.insert(aResultList.end(), anAllFeatures.begin(), anAllFeatures.end());
1647 aResultList.push_back(aFeature);
1652 //**************************************************************
1653 // Returns the list of features placed between theObject and the current feature
1654 // in the same document. Excludes theObject, includes the current feature.
1655 std::list<FeaturePtr> toCurrentFeatures(const ObjectPtr& theObject)
1657 std::list<FeaturePtr> aResult;
1658 DocumentPtr aDocument = theObject->document();
1659 std::list<FeaturePtr> anAllFeatures = allFeatures(aDocument);
1660 // find the object iterator
1661 std::list<FeaturePtr>::iterator aObjectIt = std::find(anAllFeatures.begin(), anAllFeatures.end(), theObject);
1662 if (aObjectIt == anAllFeatures.end())
1664 // find the current feature iterator
1665 std::list<FeaturePtr>::iterator aCurrentIt = std::find(anAllFeatures.begin(), anAllFeatures.end(), aDocument->currentFeature(true));
1666 if (aCurrentIt == anAllFeatures.end())
1668 // check the right order
1669 if (std::distance(aObjectIt, anAllFeatures.end()) <= std::distance(aCurrentIt, anAllFeatures.end()))
1671 // exclude the object
1672 std::advance(aObjectIt, 1);
1673 // include the current feature
1674 std::advance(aCurrentIt, 1);
1675 return std::list<FeaturePtr>(aObjectIt, aCurrentIt);
1678 bool XGUI_Workshop::canMoveFeature()
1680 QString anActionId = "MOVE_CMD";
1682 QObjectPtrList aObjects = mySelector->selection()->selectedObjects();
1683 QObjectPtrList aValidatedObjects;
1684 foreach (ObjectPtr aObject, aObjects) {
1685 if (!myModule->canApplyAction(aObject, anActionId))
1687 // To be moved feature should be in active document
1688 if (aObject->document() != ModelAPI_Session::get()->activeDocument())
1690 aValidatedObjects.append(aObject);
1692 if (aValidatedObjects.size() != aObjects.size())
1693 aObjects = aValidatedObjects;
1695 bool aCanMove = !aObjects.empty();
1697 QObjectPtrList::const_iterator anIt = aObjects.begin(), aLast = aObjects.end();
1698 for (; anIt != aLast && aCanMove; anIt++) {
1699 ObjectPtr aObject = *anIt;
1700 // 1. Get features placed between selected and current in the document
1701 std::list<FeaturePtr> aFeaturesBetween = toCurrentFeatures(aObject);
1702 // if aFeaturesBetween is empty it means wrong order or aObject is the current feature
1703 if (aFeaturesBetween.empty())
1706 std::set<FeaturePtr> aPlacedFeatures(aFeaturesBetween.begin(), aFeaturesBetween.end());
1707 // 2. Get all reference features to the selected object in the document
1708 std::set<FeaturePtr> aRefFeatures;
1709 XGUI_Tools::refsToFeatureInFeatureDocument(aObject, aRefFeatures);
1711 if (aRefFeatures.empty())
1714 // 3. Find any placed features in all reference features
1715 std::set<FeaturePtr> aIntersectionFeatures;
1716 std::set_intersection(aRefFeatures.begin(), aRefFeatures.end(),
1717 aPlacedFeatures.begin(), aPlacedFeatures.end(),
1718 std::inserter(aIntersectionFeatures, aIntersectionFeatures.begin()));
1719 // 4. Return false if any reference feature is placed before current feature
1720 if (!aIntersectionFeatures.empty())
1728 //**************************************************************
1729 bool XGUI_Workshop::canBeShaded(const ObjectPtr& theObject) const
1731 bool aCanBeShaded = myDisplayer->canBeShaded(theObject);
1732 if (!aCanBeShaded) {
1733 ResultCompSolidPtr aCompsolidResult =
1734 std::dynamic_pointer_cast<ModelAPI_ResultCompSolid>(theObject);
1735 if (aCompsolidResult.get() != NULL) { // change colors for all sub-solids
1736 for(int i = 0; i < aCompsolidResult->numberOfSubs() && !aCanBeShaded; i++)
1737 aCanBeShaded = myDisplayer->canBeShaded(aCompsolidResult->subResult(i));
1740 return aCanBeShaded;
1743 //**************************************************************
1744 bool XGUI_Workshop::canChangeColor() const
1746 QObjectPtrList aObjects = mySelector->selection()->selectedObjects();
1748 std::set<std::string> aTypes;
1749 aTypes.insert(ModelAPI_ResultGroup::group());
1750 aTypes.insert(ModelAPI_ResultConstruction::group());
1751 aTypes.insert(ModelAPI_ResultBody::group());
1752 aTypes.insert(ModelAPI_ResultPart::group());
1754 return hasResults(aObjects, aTypes);
1757 void setColor(ResultPtr theResult, const std::vector<int>& theColor)
1759 if (!theResult.get())
1762 AttributeIntArrayPtr aColorAttr = theResult->data()->intArray(ModelAPI_Result::COLOR_ID());
1763 if (aColorAttr.get() != NULL) {
1764 if (!aColorAttr->size()) {
1765 aColorAttr->setSize(3);
1767 aColorAttr->setValue(0, theColor[0]);
1768 aColorAttr->setValue(1, theColor[1]);
1769 aColorAttr->setValue(2, theColor[2]);
1773 //**************************************************************
1774 void XGUI_Workshop::changeColor(const QObjectPtrList& theObjects)
1777 AttributeIntArrayPtr aColorAttr;
1778 // 1. find the current color of the object. This is a color of AIS presentation
1779 // The objects are iterated until a first valid color is found
1780 std::vector<int> aColor;
1781 foreach(ObjectPtr anObject, theObjects) {
1782 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObject);
1783 if (aResult.get()) {
1784 XGUI_CustomPrs::getResultColor(aResult, aColor);
1787 // TODO: remove the obtaining a color from the AIS object
1788 // this does not happen never because:
1789 // 1. The color can be changed only on results
1790 // 2. The result can be not visualized in the viewer(e.g. Origin Construction)
1791 AISObjectPtr anAISObj = myDisplayer->getAISObject(anObject);
1792 if (anAISObj.get()) {
1794 anAISObj->getColor(aColor[0], aColor[1], aColor[2]);
1797 if (!aColor.empty())
1800 if (aColor.size() != 3)
1803 if (!abortAllOperations())
1805 // 2. show the dialog to change the value
1806 XGUI_ColorDialog* aDlg = new XGUI_ColorDialog(desktop());
1807 aDlg->setColor(aColor);
1808 aDlg->move(QCursor::pos());
1809 bool isDone = aDlg->exec() == QDialog::Accepted;
1813 bool isRandomColor = aDlg->isRandomColor();
1815 // 3. abort the previous operation and start a new one
1816 SessionPtr aMgr = ModelAPI_Session::get();
1817 QString aDescription = contextMenuMgr()->action("COLOR_CMD")->text();
1818 aMgr->startOperation(aDescription.toStdString());
1820 // 4. set the value to all results
1821 std::vector<int> aColorResult = aDlg->getColor();
1822 foreach(ObjectPtr anObj, theObjects) {
1823 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObj);
1824 if (aResult.get() != NULL) {
1825 ResultCompSolidPtr aCompsolidResult = std::dynamic_pointer_cast<ModelAPI_ResultCompSolid>(aResult);
1826 if (aCompsolidResult.get() != NULL) { // change colors for all sub-solids
1827 for(int i = 0; i < aCompsolidResult->numberOfSubs(); i++) {
1828 setColor(aCompsolidResult->subResult(i), !isRandomColor ? aColorResult : aDlg->getRandomColor());
1831 setColor(aResult, !isRandomColor ? aColorResult : aDlg->getRandomColor());
1834 aMgr->finishOperation();
1835 updateCommandStatus();
1838 //**************************************************************
1839 #define SET_DISPLAY_GROUP(aGroupName, aDisplay) \
1840 for (int i = 0; i < aDoc->size(aGroupName); i++) { \
1841 aDoc->object(aGroupName, i)->setDisplayed(aDisplay); \
1843 void XGUI_Workshop::showObjects(const QObjectPtrList& theList, bool isVisible)
1845 foreach (ObjectPtr aObj, theList) {
1847 ResultPartPtr aPartRes = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1849 DocumentPtr aDoc = aPartRes->partDoc();
1850 SET_DISPLAY_GROUP(ModelAPI_ResultBody::group(), isVisible)
1851 SET_DISPLAY_GROUP(ModelAPI_ResultConstruction::group(), isVisible)
1852 SET_DISPLAY_GROUP(ModelAPI_ResultGroup::group(), isVisible)
1855 aObj->setDisplayed(isVisible);
1858 Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
1861 //**************************************************************
1862 void XGUI_Workshop::showOnlyObjects(const QObjectPtrList& theList)
1864 // Hide all displayed objects
1865 QObjectPtrList aList = myDisplayer->displayedObjects();
1866 foreach (ObjectPtr aObj, aList) {
1867 if (module()->canEraseObject(aObj))
1868 aObj->setDisplayed(false);
1871 // Show only objects from the list
1872 foreach (ObjectPtr aObj, theList) {
1874 ResultPartPtr aPartRes = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1876 DocumentPtr aDoc = aPartRes->partDoc();
1877 SET_DISPLAY_GROUP(ModelAPI_ResultBody::group(), true)
1878 SET_DISPLAY_GROUP(ModelAPI_ResultConstruction::group(), true)
1879 SET_DISPLAY_GROUP(ModelAPI_ResultGroup::group(), true)
1882 aObj->setDisplayed(true);
1885 Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
1890 //**************************************************************
1891 void XGUI_Workshop::registerValidators() const
1893 SessionPtr aMgr = ModelAPI_Session::get();
1894 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
1897 //**************************************************************
1898 void XGUI_Workshop::displayDocumentResults(DocumentPtr theDoc)
1902 displayGroupResults(theDoc, ModelAPI_ResultConstruction::group());
1903 displayGroupResults(theDoc, ModelAPI_ResultBody::group());
1906 //**************************************************************
1907 void XGUI_Workshop::displayGroupResults(DocumentPtr theDoc, std::string theGroup)
1909 for (int i = 0; i < theDoc->size(theGroup); i++)
1910 theDoc->object(theGroup, i)->setDisplayed(true);
1911 //displayObject(theDoc->object(theGroup, i));
1912 Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
1915 //**************************************************************
1916 void XGUI_Workshop::setDisplayMode(const QObjectPtrList& theList, int theMode)
1918 foreach(ObjectPtr aObj, theList) {
1919 myDisplayer->setDisplayMode(aObj, (XGUI_Displayer::DisplayMode)theMode, false);
1921 ResultCompSolidPtr aCompsolidResult = std::dynamic_pointer_cast<ModelAPI_ResultCompSolid>(aObj);
1922 if (aCompsolidResult.get() != NULL) { // change colors for all sub-solids
1923 for(int i = 0; i < aCompsolidResult->numberOfSubs(); i++) {
1924 myDisplayer->setDisplayMode(aCompsolidResult->subResult(i),
1925 (XGUI_Displayer::DisplayMode)theMode, false);
1929 if (theList.size() > 0)
1930 myDisplayer->updateViewer();
1933 //**************************************************************
1934 void XGUI_Workshop::closeDocument()
1936 ModuleBase_Operation* anOperation = operationMgr()->currentOperation();
1937 while (anOperation) {
1938 anOperation->abort();
1939 anOperation = operationMgr()->currentOperation();
1941 myDisplayer->closeLocalContexts();
1942 myDisplayer->eraseAll();
1943 objectBrowser()->clearContent();
1945 module()->closeDocument();
1947 SessionPtr aMgr = ModelAPI_Session::get();
1951 void XGUI_Workshop::addHistoryMenu(QObject* theObject, const char* theSignal, const char* theSlot)
1953 XGUI_HistoryMenu* aMenu = NULL;
1954 if (isSalomeMode()) {
1955 QAction* anAction = qobject_cast<QAction*>(theObject);
1958 aMenu = new XGUI_HistoryMenu(anAction);
1960 QToolButton* aButton = qobject_cast<QToolButton*>(theObject);
1961 aMenu = new XGUI_HistoryMenu(aButton);
1963 connect(this, theSignal, aMenu, SLOT(setHistory(const QList<ActionInfo>&)));
1964 connect(aMenu, SIGNAL(actionSelected(int)), this, theSlot);
1967 QList<ActionInfo> XGUI_Workshop::processHistoryList(const std::list<std::string>& theList) const
1969 QList<ActionInfo> aResult;
1970 std::list<std::string>::const_iterator it = theList.cbegin();
1971 for (; it != theList.cend(); it++) {
1972 QString anId = QString::fromStdString(*it);
1973 bool isEditing = anId.endsWith(ModuleBase_OperationFeature::EditSuffix());
1975 anId.chop(ModuleBase_OperationFeature::EditSuffix().size());
1978 QAction* aContextMenuAct = myContextMenuMgr->actionByName(anId);
1979 if (aContextMenuAct) {
1980 anInfo.initFrom(aContextMenuAct);
1982 anInfo = myActionsMgr->actionInfoById(anId);
1985 anInfo.text = anInfo.text.prepend("Modify ");
1992 void XGUI_Workshop::synchronizeViewer()
1994 SessionPtr aMgr = ModelAPI_Session::get();
1995 DocumentPtr aDoc = aMgr->activeDocument();
1997 synchronizeGroupInViewer(aDoc, ModelAPI_ResultConstruction::group(), false);
1998 synchronizeGroupInViewer(aDoc, ModelAPI_ResultBody::group(), false);
1999 synchronizeGroupInViewer(aDoc, ModelAPI_ResultPart::group(), false);
2000 synchronizeGroupInViewer(aDoc, ModelAPI_ResultGroup::group(), false);
2003 void XGUI_Workshop::synchronizeGroupInViewer(const DocumentPtr& theDoc,
2004 const std::string& theGroup,
2005 bool theUpdateViewer)
2008 int aSize = theDoc->size(theGroup);
2009 for (int i = 0; i < aSize; i++) {
2010 aObj = theDoc->object(theGroup, i);
2011 if (aObj->isDisplayed()) {
2012 // Hide the presentation with an empty shape. But isDisplayed state of the object should not
2013 // be changed to the object becomes visible when the shape becomes not empty
2014 ResultPtr aRes = std::dynamic_pointer_cast<ModelAPI_Result>(aObj);
2015 if (aRes.get() && (!aRes->shape().get() || aRes->shape()->isNull()))
2017 myDisplayer->display(aObj, false);
2020 if (theUpdateViewer)
2021 myDisplayer->updateViewer();
2024 void XGUI_Workshop::highlightResults(const QObjectPtrList& theObjects)
2026 FeaturePtr aFeature;
2027 QObjectPtrList aSelList = theObjects;
2028 std::list<ResultPtr> aResList;
2029 foreach(ObjectPtr aObj, theObjects) {
2030 aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
2031 if (aFeature.get()) {
2032 aResList = aFeature->results();
2033 std::list<std::shared_ptr<ModelAPI_Result> >::const_iterator aIt;
2034 for(aIt = aResList.cbegin(); aIt != aResList.cend(); aIt++) {
2035 aSelList.append(*aIt);
2039 if (aSelList.count() > theObjects.count()) {
2040 // if something was found
2041 bool aBlocked = objectBrowser()->blockSignals(true);
2042 objectBrowser()->setObjectsSelected(aSelList);
2043 objectBrowser()->blockSignals(aBlocked);