1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D -->
3 //#include "XGUI_Constants.h"
4 #include "XGUI_Workshop.h"
6 #include "XGUI_ActionsMgr.h"
7 #include "XGUI_ColorDialog.h"
8 #include "XGUI_ContextMenuMgr.h"
9 #include "XGUI_Displayer.h"
10 #include "XGUI_ErrorDialog.h"
11 #include "XGUI_ModuleConnector.h"
12 #include "XGUI_ObjectsBrowser.h"
13 #include "XGUI_OperationMgr.h"
14 #include "XGUI_PropertyPanel.h"
15 #include "XGUI_SalomeConnector.h"
16 #include "XGUI_Selection.h"
17 #include "XGUI_SelectionMgr.h"
18 #include "XGUI_Tools.h"
19 #include "XGUI_ViewerProxy.h"
20 #include "XGUI_WorkshopListener.h"
21 #include <XGUI_CustomPrs.h>
22 #include <XGUI_HistoryMenu.h>
23 #include <XGUI_QtEvents.h>
25 #include <AppElements_Button.h>
26 #include <AppElements_Command.h>
27 #include <AppElements_MainMenu.h>
28 #include <AppElements_MainWindow.h>
29 #include <AppElements_MenuGroupPanel.h>
30 #include <AppElements_Viewer.h>
31 #include <AppElements_Workbench.h>
33 #include <ModelAPI_AttributeDocRef.h>
34 #include <ModelAPI_AttributeIntArray.h>
35 #include <ModelAPI_Data.h>
36 #include <ModelAPI_Events.h>
37 #include <ModelAPI_Feature.h>
38 #include <ModelAPI_Object.h>
39 #include <ModelAPI_ResultBody.h>
40 #include <ModelAPI_ResultConstruction.h>
41 #include <ModelAPI_ResultGroup.h>
42 #include <ModelAPI_ResultParameter.h>
43 #include <ModelAPI_Session.h>
44 #include <ModelAPI_Validator.h>
46 //#include <PartSetPlugin_Part.h>
48 #include <Events_Loop.h>
49 #include <Events_Error.h>
50 #include <Events_LongOp.h>
52 #include <ModuleBase_FilterFactory.h>
53 #include <ModuleBase_IModule.h>
54 #include <ModuleBase_IViewer.h>
55 #include <ModuleBase_Operation.h>
56 #include <ModuleBase_OperationDescription.h>
57 #include <ModuleBase_PageBase.h>
58 #include <ModuleBase_Preferences.h>
59 #include <ModuleBase_SelectionValidator.h>
60 #include <ModuleBase_Tools.h>
61 #include <ModuleBase_WidgetFactory.h>
63 #include <Config_Common.h>
64 #include <Config_FeatureMessage.h>
65 #include <Config_ModuleReader.h>
66 #include <Config_PointerMessage.h>
67 #include <Config_PropManager.h>
68 #include <Config_SelectionFilterMessage.h>
70 #include <SUIT_ResourceMgr.h>
72 #include <QApplication>
73 #include <QFileDialog>
74 #include <QMessageBox>
75 #include <QMdiSubWindow>
76 #include <QPushButton>
77 #include <QDockWidget>
82 #include <QToolButton>
84 #include <QDesktopWidget>
97 //#define DEBUG_DELETE
99 XGUI_Workshop::XGUI_Workshop(XGUI_SalomeConnector* theConnector)
101 myCurrentDir(QString()),
103 mySalomeConnector(theConnector),
108 myMainWindow = mySalomeConnector ? 0 : new AppElements_MainWindow();
111 SUIT_ResourceMgr* aResMgr = ModuleBase_Preferences::resourceMgr();
112 bool aCloc = aResMgr->booleanValue("language", "locale", true);
114 QLocale::setDefault( QLocale::c() );
116 QLocale::setDefault( QLocale::system() );
119 myDisplayer = new XGUI_Displayer(this);
121 mySelector = new XGUI_SelectionMgr(this);
122 //connect(mySelector, SIGNAL(selectionChanged()), this, SLOT(updateModuleCommands()));
124 myOperationMgr = new XGUI_OperationMgr(this, 0);
125 myActionsMgr = new XGUI_ActionsMgr(this);
126 myErrorDlg = new XGUI_ErrorDialog(QApplication::desktop());
127 myContextMenuMgr = new XGUI_ContextMenuMgr(this);
128 connect(myContextMenuMgr, SIGNAL(actionTriggered(const QString&, bool)), this,
129 SLOT(onContextMenuCommand(const QString&, bool)));
131 myViewerProxy = new XGUI_ViewerProxy(this);
132 connect(myViewerProxy, SIGNAL(selectionChanged()),
133 myActionsMgr, SLOT(updateOnViewSelection()));
135 myModuleConnector = new XGUI_ModuleConnector(this);
137 ModuleBase_IWorkshop* aWorkshop = moduleConnector();
138 myOperationMgr->setWorkshop(aWorkshop);
140 myEventsListener = new XGUI_WorkshopListener(aWorkshop);
142 connect(myOperationMgr, SIGNAL(operationStarted(ModuleBase_Operation*)),
143 SLOT(onOperationStarted(ModuleBase_Operation*)));
144 connect(myOperationMgr, SIGNAL(operationResumed(ModuleBase_Operation*)),
145 SLOT(onOperationResumed(ModuleBase_Operation*)));
146 connect(myOperationMgr, SIGNAL(operationStopped(ModuleBase_Operation*)),
147 SLOT(onOperationStopped(ModuleBase_Operation*)));
148 connect(myOperationMgr, SIGNAL(operationCommitted(ModuleBase_Operation*)),
149 SLOT(onOperationCommitted(ModuleBase_Operation*)));
150 connect(myOperationMgr, SIGNAL(operationAborted(ModuleBase_Operation*)),
151 SLOT(onOperationAborted(ModuleBase_Operation*)));
153 connect(myMainWindow, SIGNAL(exitKeySequence()), SLOT(onExit()));
154 connect(this, SIGNAL(errorOccurred(const QString&)), myErrorDlg, SLOT(addError(const QString&)));
155 connect(myEventsListener, SIGNAL(errorOccurred(const QString&)),
156 myErrorDlg, SLOT(addError(const QString&)));
158 //Config_PropManager::registerProp("Visualization", "object_default_color", "Object color",
159 // Config_Prop::Color, "225,225,225");
161 Config_PropManager::registerProp("Visualization", "result_body_color", "Body color",
162 Config_Prop::Color, ModelAPI_ResultBody::DEFAULT_COLOR());
163 Config_PropManager::registerProp("Visualization", "result_group_color", "Group color",
164 Config_Prop::Color, ModelAPI_ResultGroup::DEFAULT_COLOR());
165 Config_PropManager::registerProp("Visualization", "result_construction_color", "Construction color",
166 Config_Prop::Color, ModelAPI_ResultConstruction::DEFAULT_COLOR());
167 Config_PropManager::registerProp("Visualization", "result_part_color", "Part color",
168 Config_Prop::Color, ModelAPI_ResultPart::DEFAULT_COLOR());
171 //******************************************************
172 XGUI_Workshop::~XGUI_Workshop(void)
177 //******************************************************
178 void XGUI_Workshop::startApplication()
182 Config_PropManager::registerProp("Plugins", "default_path", "Default Path",
183 Config_Prop::Directory, "");
185 //Initialize event listening
186 myEventsListener->initializeEventListening();
188 registerValidators();
190 // Calling of loadCustomProps before activating module is required
191 // by Config_PropManger to restore user-defined path to plugins
192 ModuleBase_Preferences::loadCustomProps();
195 myMainWindow->show();
196 updateCommandStatus();
201 emit applicationStarted();
204 void XGUI_Workshop::activateModule()
206 myModule->activateSelectionFilters();
208 connect(myDisplayer, SIGNAL(objectDisplayed(ObjectPtr, AISObjectPtr)),
209 myModule, SLOT(onObjectDisplayed(ObjectPtr, AISObjectPtr)));
210 connect(myDisplayer, SIGNAL(beforeObjectErase(ObjectPtr, AISObjectPtr)),
211 myModule, SLOT(onBeforeObjectErase(ObjectPtr, AISObjectPtr)));
213 myActionsMgr->update();
217 void XGUI_Workshop::deactivateModule()
219 myModule->deactivateSelectionFilters();
221 disconnect(myDisplayer, SIGNAL(objectDisplayed(ObjectPtr, AISObjectPtr)),
222 myModule, SLOT(onObjectDisplayed(ObjectPtr, AISObjectPtr)));
223 disconnect(myDisplayer, SIGNAL(beforeObjectErase(ObjectPtr, AISObjectPtr)),
224 myModule, SLOT(onBeforeObjectErase(ObjectPtr, AISObjectPtr)));
227 //******************************************************
228 void XGUI_Workshop::initMenu()
230 myContextMenuMgr->createActions();
232 if (isSalomeMode()) {
233 // Create only Undo, Redo commands
234 QAction* aAction = salomeConnector()->addDesktopCommand("UNDO_CMD", tr("Undo"),
235 tr("Undo last command"),
236 QIcon(":pictures/undo.png"),
237 QKeySequence::Undo, false, "MEN_DESK_EDIT");
238 connect(aAction, SIGNAL(triggered(bool)), this, SLOT(onUndo()));
239 addHistoryMenu(aAction, SIGNAL(updateUndoHistory(const QList<ActionInfo>&)), SLOT(onUndo(int)));
241 aAction = salomeConnector()->addDesktopCommand("REDO_CMD", tr("Redo"), tr("Redo last command"),
242 QIcon(":pictures/redo.png"), QKeySequence::Redo,
243 false, "MEN_DESK_EDIT");
244 connect(aAction, SIGNAL(triggered(bool)), this, SLOT(onRedo()));
245 addHistoryMenu(aAction, SIGNAL(updateRedoHistory(const QList<ActionInfo>&)), SLOT(onRedo(int)));
247 salomeConnector()->addDesktopMenuSeparator("MEN_DESK_EDIT");
248 aAction = salomeConnector()->addDesktopCommand("REBUILD_CMD", tr("Rebuild"), tr("Rebuild data objects"),
249 QIcon(":pictures/rebuild.png"), QKeySequence(),
250 false, "MEN_DESK_EDIT");
251 connect(aAction, SIGNAL(triggered(bool)), this, SLOT(onRebuild()));
252 salomeConnector()->addDesktopMenuSeparator("MEN_DESK_EDIT");
254 aAction = salomeConnector()->addDesktopCommand("SAVEAS_CMD", tr("Export NewGeom..."), tr("Export the current document into a NewGeom file"),
255 QIcon(), QKeySequence(),
256 false, "MEN_DESK_FILE");
257 connect(aAction, SIGNAL(triggered(bool)), this, SLOT(onSaveAs()));
259 aAction = salomeConnector()->addDesktopCommand("OPEN_CMD", tr("Import NewGeom..."), tr("Import a NewGeom file"),
260 QIcon(), QKeySequence(),
261 false, "MEN_DESK_FILE");
262 connect(aAction, SIGNAL(triggered(bool)), this, SLOT(onOpen()));
263 salomeConnector()->addDesktopMenuSeparator("MEN_DESK_FILE");
267 // File commands group
268 AppElements_MenuGroupPanel* aGroup = myMainWindow->menuObject()->generalPage();
270 AppElements_Command* aCommand;
272 aCommand = aGroup->addFeature("SAVE_CMD", tr("Save"), tr("Save the document"),
273 QIcon(":pictures/save.png"), QKeySequence::Save);
274 aCommand->connectTo(this, SLOT(onSave()));
275 //aCommand->disable();
277 QString aUndoId = "UNDO_CMD";
278 aCommand = aGroup->addFeature(aUndoId, tr("Undo"), tr("Undo last command"),
279 QIcon(":pictures/undo.png"), QKeySequence::Undo);
280 aCommand->connectTo(this, SLOT(onUndo()));
281 AppElements_Button* aUndoButton = qobject_cast<AppElements_Button*>(aGroup->widget(aUndoId));
282 addHistoryMenu(aUndoButton,
283 SIGNAL(updateUndoHistory(const QList<ActionInfo>&)),
286 QString aRedoId = "REDO_CMD";
287 aCommand = aGroup->addFeature(aRedoId, tr("Redo"), tr("Redo last command"),
288 QIcon(":pictures/redo.png"), QKeySequence::Redo);
289 aCommand->connectTo(this, SLOT(onRedo()));
290 AppElements_Button* aRedoButton = qobject_cast<AppElements_Button*>(aGroup->widget(aRedoId));
291 addHistoryMenu(aRedoButton,
292 SIGNAL(updateRedoHistory(const QList<ActionInfo>&)),
295 aCommand = aGroup->addFeature("REBUILD_CMD", tr("Rebuild"), tr("Rebuild data objects"),
296 QIcon(":pictures/rebuild.png"), QKeySequence());
297 aCommand->connectTo(this, SLOT(onRebuild()));
299 aCommand = aGroup->addFeature("SAVEAS_CMD", tr("Save as..."), tr("Save the document into a file"),
300 QIcon(":pictures/save.png"), QKeySequence());
301 aCommand->connectTo(this, SLOT(onSaveAs()));
302 //aCommand->disable();
304 aCommand = aGroup->addFeature("OPEN_CMD", tr("Open..."), tr("Open a new document"),
305 QIcon(":pictures/open.png"), QKeySequence::Open);
306 aCommand->connectTo(this, SLOT(onOpen()));
308 //aCommand = aGroup->addFeature("NEW_CMD", tr("New"), tr("Create a new document"),
309 // QIcon(":pictures/new.png"), QKeySequence::New);
310 //aCommand->connectTo(this, SLOT(onNew()));
312 aCommand = aGroup->addFeature("PREF_CMD", tr("Preferences"), tr("Edit preferences"),
313 QIcon(":pictures/preferences.png"), QKeySequence::Preferences);
314 aCommand->connectTo(this, SLOT(onPreferences()));
316 aCommand = aGroup->addFeature("EXIT_CMD", tr("Exit"), tr("Exit application"),
317 QIcon(":pictures/close.png"), QKeySequence::Close);
318 aCommand->connectTo(this, SLOT(onExit()));
319 //FIXME: SBH's test action. Can be used for some GUI tests.
321 // aCommand = aGroup->addFeature("TEST_CMD", "Test!", "Private debug button",
322 // QIcon(":pictures/close.png"), QKeySequence(), true);
323 // aCommand->connectTo(myMainWindow, SLOT(dockPythonConsole()));
327 //******************************************************
328 AppElements_Workbench* XGUI_Workshop::addWorkbench(const QString& theName)
330 AppElements_MainMenu* aMenuBar = myMainWindow->menuObject();
331 return aMenuBar->addWorkbench(theName);
334 //******************************************************
335 QMainWindow* XGUI_Workshop::desktop() const
337 return isSalomeMode() ? salomeConnector()->desktop() : myMainWindow;
340 //******************************************************
341 void XGUI_Workshop::onStartWaiting()
343 if (Events_LongOp::isPerformed()) {
344 QApplication::setOverrideCursor(QCursor(Qt::WaitCursor));
349 //******************************************************
350 void XGUI_Workshop::deactivateActiveObject(const ObjectPtr& theObject, const bool theUpdateViewer)
352 if (!myModule->canActivateSelection(theObject)) {
353 if (myDisplayer->isActive(theObject))
354 myDisplayer->deactivate(theObject, theUpdateViewer);
358 //******************************************************
359 void XGUI_Workshop::onOperationStarted(ModuleBase_Operation* theOperation)
361 setNestedFeatures(theOperation);
363 if (theOperation->getDescription()->hasXmlRepresentation()) { //!< No need for property panel
364 connectWithOperation(theOperation);
365 setPropertyPanel(theOperation);
366 // filling the operation values by the current selection
367 // if the operation can be commited after the controls filling, the method perform should
368 // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
369 if (!theOperation->isEditOperation()) {
370 theOperation->activateByPreselection();
371 if (operationMgr()->currentOperation() != theOperation)
375 updateCommandStatus();
377 myModule->onOperationStarted(theOperation);
379 // the objects of the current operation should be deactivated
380 QObjectPtrList anObjects;
381 FeaturePtr aFeature = theOperation->feature();
382 anObjects.append(aFeature);
383 std::list<ResultPtr> aResults = aFeature->results();
384 std::list<ResultPtr>::const_iterator aIt;
385 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
386 anObjects.append(*aIt);
388 QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
389 for (; anIt != aLast; anIt++)
390 deactivateActiveObject(*anIt, false);
391 if (anObjects.size() > 0)
392 myDisplayer->updateViewer();
395 //******************************************************
396 void XGUI_Workshop::onOperationResumed(ModuleBase_Operation* theOperation)
398 setNestedFeatures(theOperation);
400 if (theOperation->getDescription()->hasXmlRepresentation()) { //!< No need for property panel
401 // connectWithOperation(theOperation); already connected
402 setPropertyPanel(theOperation);
404 updateCommandStatus();
406 myModule->onOperationResumed(theOperation);
410 //******************************************************
411 void XGUI_Workshop::onOperationStopped(ModuleBase_Operation* theOperation)
413 ModuleBase_ISelection* aSel = mySelector->selection();
414 QObjectPtrList aObj = aSel->selectedPresentations();
415 //!< No need for property panel
416 updateCommandStatus();
418 myPropertyPanel->cleanContent();
420 myModule->onOperationStopped(theOperation);
422 // the deactivated objects of the current operation should be activated back.
423 // They were deactivated on operation start or an object redisplay
424 QObjectPtrList anObjects;
425 FeaturePtr aFeature = theOperation->feature();
426 if (myDisplayer->isVisible(aFeature) && !myDisplayer->isActive(aFeature))
427 anObjects.append(aFeature);
428 std::list<ResultPtr> aResults = aFeature->results();
429 std::list<ResultPtr>::const_iterator aIt;
430 for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
431 ResultPtr anObject = *aIt;
432 if (myDisplayer->isVisible(anObject) && !myDisplayer->isActive(anObject)) {
433 anObjects.append(anObject);
437 module()->activeSelectionModes(aModes);
438 myDisplayer->activateObjects(aModes, anObjects);
442 void XGUI_Workshop::onOperationCommitted(ModuleBase_Operation* theOperation)
444 myModule->onOperationCommitted(theOperation);
447 void XGUI_Workshop::onOperationAborted(ModuleBase_Operation* theOperation)
449 myModule->onOperationAborted(theOperation);
452 void XGUI_Workshop::setNestedFeatures(ModuleBase_Operation* theOperation)
454 if (this->isSalomeMode())
455 theOperation->setNestedFeatures(mySalomeConnector->nestedActions(theOperation->id()));
457 theOperation->setNestedFeatures(myActionsMgr->nestedCommands(theOperation->id()));
460 void XGUI_Workshop::setPropertyPanel(ModuleBase_Operation* theOperation)
463 QString aXmlRepr = theOperation->getDescription()->xmlRepresentation();
464 ModuleBase_WidgetFactory aFactory = ModuleBase_WidgetFactory(aXmlRepr.toStdString(),
467 myPropertyPanel->cleanContent();
468 aFactory.createWidget(myPropertyPanel->contentWidget());
470 QList<ModuleBase_ModelWidget*> aWidgets = aFactory.getModelWidgets();
471 foreach (ModuleBase_ModelWidget* aWidget, aWidgets) {
472 bool isStoreValue = !theOperation->isEditOperation() &&
473 !aWidget->getDefaultValue().empty() &&
474 !aWidget->isComputedDefault();
475 aWidget->setFeature(theOperation->feature(), isStoreValue);
476 aWidget->enableFocusProcessing();
479 myPropertyPanel->setModelWidgets(aWidgets);
480 theOperation->setPropertyPanel(myPropertyPanel);
482 myModule->propertyPanelDefined(theOperation);
484 myPropertyPanel->setWindowTitle(theOperation->getDescription()->description());
488 * Makes a signal/slot connections between Property Panel
489 * and given operation. The given operation becomes a
490 * current operation and previous operation if exists
492 void XGUI_Workshop::connectWithOperation(ModuleBase_Operation* theOperation)
494 QAction* aCommand = 0;
495 if (isSalomeMode()) {
496 aCommand = salomeConnector()->command(theOperation->getDescription()->operationId());
498 AppElements_MainMenu* aMenu = myMainWindow->menuObject();
499 FeaturePtr aFeature = theOperation->feature();
501 aCommand = aMenu->feature(QString::fromStdString(aFeature->getKind()));
503 //Abort operation on uncheck the command
505 connect(aCommand, SIGNAL(triggered(bool)), theOperation, SLOT(setRunning(bool)));
510 * Saves document with given name.
512 void XGUI_Workshop::saveDocument(const QString& theName, std::list<std::string>& theFileNames)
514 QApplication::restoreOverrideCursor();
515 SessionPtr aMgr = ModelAPI_Session::get();
516 aMgr->save(theName.toLatin1().constData(), theFileNames);
517 QApplication::restoreOverrideCursor();
520 bool XGUI_Workshop::isActiveOperationAborted()
522 return myOperationMgr->abortAllOperations();
525 //******************************************************
526 void XGUI_Workshop::onExit()
528 SessionPtr aMgr = ModelAPI_Session::get();
529 if (aMgr->isModified()) {
530 int anAnswer = QMessageBox::question(
531 myMainWindow, tr("Save current file"), tr("The document is modified, save before exit?"),
532 QMessageBox::Save | QMessageBox::Discard | QMessageBox::Cancel, QMessageBox::Cancel);
533 if (anAnswer == QMessageBox::Save) {
534 bool saved = onSave();
538 } else if (anAnswer == QMessageBox::Cancel) {
545 //******************************************************
546 void XGUI_Workshop::onNew()
548 QApplication::setOverrideCursor(Qt::WaitCursor);
549 if (objectBrowser() == 0) {
551 mySelector->connectViewers();
553 myViewerProxy->connectToViewer();
555 if (!isSalomeMode()) {
556 myMainWindow->showPythonConsole();
557 QMdiSubWindow* aWnd = myMainWindow->viewer()->createView();
558 aWnd->showMaximized();
559 updateCommandStatus();
561 myContextMenuMgr->connectViewer();
562 QApplication::restoreOverrideCursor();
565 //******************************************************
566 void XGUI_Workshop::onOpen()
568 if(!isActiveOperationAborted())
570 //save current file before close if modified
571 SessionPtr aSession = ModelAPI_Session::get();
572 if (aSession->isModified()) {
573 //TODO(sbh): re-launch the app?
574 int anAnswer = QMessageBox::question(
575 myMainWindow, tr("Save current file"),
576 tr("The document is modified, save before opening another?"),
577 QMessageBox::Save | QMessageBox::Discard | QMessageBox::Cancel, QMessageBox::Cancel);
578 if (anAnswer == QMessageBox::Save) {
580 } else if (anAnswer == QMessageBox::Cancel) {
586 //show file dialog, check if readable and open
587 myCurrentDir = QFileDialog::getExistingDirectory(mainWindow(), tr("Select directory"));
588 if (myCurrentDir.isEmpty())
590 QFileInfo aFileInfo(myCurrentDir);
591 if (!aFileInfo.exists() || !aFileInfo.isReadable()) {
592 QMessageBox::critical(myMainWindow, tr("Warning"), tr("Unable to open the file."));
596 QApplication::setOverrideCursor(Qt::WaitCursor);
597 aSession->closeAll();
598 aSession->load(myCurrentDir.toLatin1().constData());
599 myObjectBrowser->rebuildDataTree();
600 //displayAllResults();
601 updateCommandStatus();
602 QApplication::restoreOverrideCursor();
605 //******************************************************
606 bool XGUI_Workshop::onSave()
608 if(!isActiveOperationAborted())
610 if (myCurrentDir.isEmpty()) {
613 std::list<std::string> aFiles;
614 saveDocument(myCurrentDir, aFiles);
615 updateCommandStatus();
617 myMainWindow->setModifiedState(false);
621 //******************************************************
622 bool XGUI_Workshop::onSaveAs()
624 if(!isActiveOperationAborted())
626 QFileDialog dialog(mainWindow());
627 dialog.setWindowTitle(tr("Select directory to save files..."));
628 dialog.setFileMode(QFileDialog::Directory);
629 dialog.setFilter(tr("Directories (*)"));
630 dialog.setOptions(QFileDialog::HideNameFilterDetails | QFileDialog::ShowDirsOnly);
631 dialog.setViewMode(QFileDialog::Detail);
633 if (!dialog.exec()) {
637 QString aTempDir = dialog.selectedFiles().first();
639 if (aDir.exists() && !aDir.entryInfoList(QDir::NoDotAndDotDot | QDir::AllEntries).isEmpty()) {
640 int answer = QMessageBox::question(
642 //: Title of the dialog which asks user if he wants to save study in existing non-empty folder
644 tr("The directory already contains some files, save anyway?"),
645 QMessageBox::Save | QMessageBox::Cancel);
646 if (answer == QMessageBox::Cancel) {
650 myCurrentDir = aTempDir;
651 if (!isSalomeMode()) {
652 myMainWindow->setCurrentDir(myCurrentDir, false);
653 myMainWindow->setModifiedState(false);
658 //******************************************************
659 void XGUI_Workshop::onUndo(int theTimes)
661 objectBrowser()->treeView()->setCurrentIndex(QModelIndex());
662 SessionPtr aMgr = ModelAPI_Session::get();
663 if (aMgr->isOperation())
664 operationMgr()->onAbortOperation();
665 for (int i = 0; i < theTimes; ++i) {
668 updateCompositeActionState();
669 updateCommandStatus();
672 //******************************************************
673 void XGUI_Workshop::onRedo(int theTimes)
675 // the viewer update should be blocked in order to avoid the features blinking. For the created
676 // feature a results are created, the flush of the created signal caused the viewer redisplay for
677 // each created result. After a redisplay signal is flushed. So, the viewer update is blocked until
678 // redo of all possible objects happens
679 bool isUpdateEnabled = myDisplayer->enableUpdateViewer(false);
681 objectBrowser()->treeView()->setCurrentIndex(QModelIndex());
682 SessionPtr aMgr = ModelAPI_Session::get();
683 if (aMgr->isOperation())
684 operationMgr()->onAbortOperation();
685 for (int i = 0; i < theTimes; ++i) {
688 updateCompositeActionState();
689 updateCommandStatus();
691 // unblock the viewer update functionality and make update on purpose
692 myDisplayer->enableUpdateViewer(isUpdateEnabled);
693 myDisplayer->updateViewer();
696 //******************************************************
697 void XGUI_Workshop::onRebuild()
699 SessionPtr aMgr = ModelAPI_Session::get();
700 bool aWasOperation = aMgr->isOperation(); // keep this value
701 if (!aWasOperation) {
702 aMgr->startOperation("Rebuild");
704 static const Events_ID aRebuildEvent = Events_Loop::loop()->eventByName("Rebuild");
705 Events_Loop::loop()->send(std::shared_ptr<Events_Message>(
706 new Events_Message(aRebuildEvent, this)));
707 if (!aWasOperation) {
708 aMgr->finishOperation();
710 updateCommandStatus();
713 //******************************************************
714 void XGUI_Workshop::onPreferences()
716 ModuleBase_Prefs aModif;
717 ModuleBase_Preferences::editPreferences(aModif);
718 if (aModif.size() > 0) {
720 foreach (ModuleBase_Pref aPref, aModif)
722 aSection = aPref.first;
723 if (aSection == ModuleBase_Preferences::VIEWER_SECTION) {
725 myMainWindow->viewer()->updateFromResources();
726 } else if (aSection == ModuleBase_Preferences::MENU_SECTION) {
728 myMainWindow->menuObject()->updateFromResources();
734 //******************************************************
735 ModuleBase_IModule* XGUI_Workshop::loadModule(const QString& theModule)
737 QString libName = QString::fromStdString(library(theModule.toStdString()));
738 if (libName.isEmpty()) {
739 qWarning(qPrintable(tr("Information about module \"%1\" doesn't exist.").arg(theModule)));
744 CREATE_FUNC crtInst = 0;
747 HINSTANCE modLib = ::LoadLibrary((LPTSTR) qPrintable(libName));
751 FORMAT_MESSAGE_ALLOCATE_BUFFER | FORMAT_MESSAGE_FROM_SYSTEM | FORMAT_MESSAGE_IGNORE_INSERTS,
752 0, ::GetLastError(), 0, (LPTSTR) & lpMsgBuf, 0, 0);
753 QString aMsg((char*) &lpMsgBuf);
754 err = QString("Failed to load %1. %2").arg(libName).arg(aMsg);
755 ::LocalFree(lpMsgBuf);
757 crtInst = (CREATE_FUNC) ::GetProcAddress(modLib, CREATE_MODULE);
761 FORMAT_MESSAGE_ALLOCATE_BUFFER | FORMAT_MESSAGE_FROM_SYSTEM
762 | FORMAT_MESSAGE_IGNORE_INSERTS,
763 0, ::GetLastError(), 0, (LPTSTR) & lpMsgBuf, 0, 0);
764 QString aMsg((char*) &lpMsgBuf);
765 err = QString("Failed to find %1 function. %2").arg( CREATE_MODULE).arg(aMsg);
766 ::LocalFree(lpMsgBuf);
770 void* modLib = dlopen( libName.toLatin1(), RTLD_LAZY | RTLD_GLOBAL );
772 err = QString( "Can not load library %1. %2" ).arg( libName ).arg( dlerror() );
774 crtInst = (CREATE_FUNC)dlsym( modLib, CREATE_MODULE );
776 err = QString( "Failed to find function %1. %2" ).arg( CREATE_MODULE ).arg( dlerror() );
781 ModuleBase_IModule* aModule = crtInst ? crtInst(myModuleConnector) : 0;
783 if (!err.isEmpty()) {
785 Events_Error::send(err.toStdString());
787 qWarning(qPrintable(err));
793 //******************************************************
794 bool XGUI_Workshop::createModule()
796 Config_ModuleReader aModuleReader;
797 QString moduleName = QString::fromStdString(aModuleReader.getModuleName());
798 myModule = loadModule(moduleName);
802 //connect(myDisplayer, SIGNAL(objectDisplayed(ObjectPtr, AISObjectPtr)),
803 // myModule, SLOT(onObjectDisplayed(ObjectPtr, AISObjectPtr)));
804 //connect(myDisplayer, SIGNAL(beforeObjectErase(ObjectPtr, AISObjectPtr)),
805 // myModule, SLOT(onBeforeObjectErase(ObjectPtr, AISObjectPtr)));
807 myModule->createFeatures();
808 //myActionsMgr->update();
812 //******************************************************
813 void XGUI_Workshop::updateCommandStatus()
815 QList<QAction*> aCommands;
816 if (isSalomeMode()) { // update commands in SALOME mode
817 aCommands = salomeConnector()->commandList();
819 AppElements_MainMenu* aMenuBar = myMainWindow->menuObject();
820 foreach (AppElements_Command* aCmd, aMenuBar->features())
821 aCommands.append(aCmd);
823 SessionPtr aMgr = ModelAPI_Session::get();
824 if (aMgr->hasModuleDocument()) {
825 foreach(QAction* aCmd, aCommands) {
826 QString aId = aCmd->data().toString();
827 if (aId == "UNDO_CMD")
828 aCmd->setEnabled(myModule->canUndo());
829 else if (aId == "REDO_CMD")
830 aCmd->setEnabled(myModule->canRedo());
832 // Enable all commands
833 aCmd->setEnabled(true);
837 foreach(QAction* aCmd, aCommands) {
838 QString aId = aCmd->data().toString();
839 if (aId == "NEW_CMD")
840 aCmd->setEnabled(true);
841 else if (aId == "EXIT_CMD")
842 aCmd->setEnabled(true);
844 aCmd->setEnabled(false);
847 myActionsMgr->update();
848 emit commandStatusUpdated();
851 //******************************************************
852 void XGUI_Workshop::updateCompositeActionState()
854 // in order to apply is enabled only if there are modifications in the model
855 // e.g. sketch can be applyed only if at least one nested element create is finished
856 bool aCanUndo = ModelAPI_Session::get()->canUndo();
857 bool aParentValid = operationMgr()->isParentOperationValid();
858 bool aCurrentValid = operationMgr()->currentOperation() &&
859 operationMgr()->currentOperation()->isValid();
861 QAction* aAcceptAllAct = myActionsMgr->operationStateAction(XGUI_ActionsMgr::AcceptAll);
862 aAcceptAllAct->setEnabled(aParentValid && (aCanUndo || aCurrentValid));
865 void XGUI_Workshop::updateHistory()
867 std::list<std::string> aUndoList = ModelAPI_Session::get()->undoList();
868 QList<ActionInfo> aUndoRes = processHistoryList(aUndoList);
869 emit updateUndoHistory(aUndoRes);
871 std::list<std::string> aRedoList = ModelAPI_Session::get()->redoList();
872 QList<ActionInfo> aRedoRes = processHistoryList(aRedoList);
873 emit updateRedoHistory(aRedoRes);
876 //******************************************************
877 QDockWidget* XGUI_Workshop::createObjectBrowser(QWidget* theParent)
879 QDockWidget* aObjDock = new QDockWidget(theParent);
880 aObjDock->setAllowedAreas(Qt::LeftDockWidgetArea | Qt::RightDockWidgetArea | Qt::BottomDockWidgetArea);
881 aObjDock->setWindowTitle(tr("Object browser"));
882 aObjDock->setStyleSheet(
883 "::title { position: relative; padding-left: 5px; text-align: left center }");
884 myObjectBrowser = new XGUI_ObjectsBrowser(aObjDock);
885 myObjectBrowser->setDataModel(myModule->dataModel());
886 myModule->customizeObjectBrowser(myObjectBrowser);
887 aObjDock->setWidget(myObjectBrowser);
889 myContextMenuMgr->connectObjectBrowser();
893 //******************************************************
895 * Creates dock widgets, places them in corresponding area
896 * and tabifies if necessary.
898 void XGUI_Workshop::createDockWidgets()
900 QMainWindow* aDesktop = isSalomeMode() ? salomeConnector()->desktop() : myMainWindow;
901 QDockWidget* aObjDock = createObjectBrowser(aDesktop);
902 aDesktop->addDockWidget(Qt::LeftDockWidgetArea, aObjDock);
903 myPropertyPanel = new XGUI_PropertyPanel(aDesktop);
904 myPropertyPanel->setupActions(myActionsMgr);
905 myPropertyPanel->setAllowedAreas(Qt::LeftDockWidgetArea | Qt::RightDockWidgetArea | Qt::BottomDockWidgetArea);
906 aDesktop->addDockWidget(Qt::LeftDockWidgetArea, myPropertyPanel);
907 hidePropertyPanel(); ///<! Invisible by default
909 aDesktop->tabifyDockWidget(aObjDock, myPropertyPanel);
910 myPropertyPanel->installEventFilter(myOperationMgr);
912 QAction* aOkAct = myActionsMgr->operationStateAction(XGUI_ActionsMgr::Accept);
913 connect(aOkAct, SIGNAL(triggered()), myOperationMgr, SLOT(onCommitOperation()));
914 QAction* aCancelAct = myActionsMgr->operationStateAction(XGUI_ActionsMgr::Abort);
915 connect(aCancelAct, SIGNAL(triggered()), myOperationMgr, SLOT(onAbortOperation()));
916 connect(myPropertyPanel, SIGNAL(noMoreWidgets()), myModule, SLOT(onNoMoreWidgets()));
917 connect(myPropertyPanel, SIGNAL(keyReleased(QKeyEvent*)),
918 myOperationMgr, SLOT(onKeyReleased(QKeyEvent*)));
919 connect(myOperationMgr, SIGNAL(validationStateChanged(bool)),
920 aOkAct, SLOT(setEnabled(bool)));
921 QAction* aAcceptAllAct = myActionsMgr->operationStateAction(XGUI_ActionsMgr::AcceptAll);
922 connect(myOperationMgr, SIGNAL(nestedStateChanged(bool)),
923 aAcceptAllAct, SLOT(setEnabled(bool)));
927 //******************************************************
928 void XGUI_Workshop::showPropertyPanel()
930 QAction* aViewAct = myPropertyPanel->toggleViewAction();
931 ///<! Restore ability to close panel from the window's menu
932 aViewAct->setEnabled(true);
933 myPropertyPanel->show();
934 myPropertyPanel->raise();
937 //******************************************************
938 void XGUI_Workshop::hidePropertyPanel()
940 QAction* aViewAct = myPropertyPanel->toggleViewAction();
941 ///<! Do not allow to show empty property panel
942 aViewAct->setEnabled(false);
943 myPropertyPanel->hide();
946 //******************************************************
947 void XGUI_Workshop::showObjectBrowser()
949 myObjectBrowser->parentWidget()->show();
952 //******************************************************
953 void XGUI_Workshop::hideObjectBrowser()
955 myObjectBrowser->parentWidget()->hide();
958 //******************************************************
959 //void XGUI_Workshop::onFeatureTriggered()
961 // QAction* aCmd = dynamic_cast<QAction*>(sender());
963 // QString aId = salomeConnector()->commandId(aCmd);
964 // if (!aId.isNull())
965 // myModule->launchOperation(aId);
969 //******************************************************
970 void XGUI_Workshop::salomeViewerSelectionChanged()
972 emit salomeViewerSelection();
975 //**************************************************************
976 ModuleBase_IViewer* XGUI_Workshop::salomeViewer() const
978 return mySalomeConnector->viewer();
981 //**************************************************************
982 void XGUI_Workshop::onContextMenuCommand(const QString& theId, bool isChecked)
984 QObjectPtrList aObjects = mySelector->selection()->selectedObjects();
985 if (theId == "DELETE_CMD")
987 if (theId == "MOVE_CMD")
989 else if (theId == "COLOR_CMD")
990 changeColor(aObjects);
991 else if (theId == "SHOW_CMD")
992 showObjects(aObjects, true);
993 else if (theId == "HIDE_CMD")
994 showObjects(aObjects, false);
995 else if (theId == "SHOW_ONLY_CMD")
996 showOnlyObjects(aObjects);
997 else if (theId == "SHADING_CMD")
998 setDisplayMode(aObjects, XGUI_Displayer::Shading);
999 else if (theId == "WIREFRAME_CMD")
1000 setDisplayMode(aObjects, XGUI_Displayer::Wireframe);
1001 else if (theId == "HIDEALL_CMD") {
1002 QObjectPtrList aList = myDisplayer->displayedObjects();
1003 foreach (ObjectPtr aObj, aList)
1004 aObj->setDisplayed(false);
1005 Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
1009 //**************************************************************
1010 void XGUI_Workshop::deleteObjects()
1012 ModuleBase_IModule* aModule = module();
1013 // 1. allow the module to delete objects, do nothing if it has succeed
1014 if (aModule->deleteObjects()) {
1015 updateCommandStatus();
1019 if (!isActiveOperationAborted())
1021 QObjectPtrList anObjects = mySelector->selection()->selectedObjects();
1022 // It is necessary to clear selection in order to avoid selection changed event during
1023 // deleteion and negative consequences connected with processing of already deleted items
1024 mySelector->clearSelection();
1025 // check whether the object can be deleted. There should not be parts which are not loaded
1026 if (!XGUI_Tools::canRemoveOrRename(myMainWindow, anObjects))
1029 bool hasResult = false;
1030 bool hasFeature = false;
1031 bool hasParameter = false;
1032 bool hasSubFeature = false;
1033 ModuleBase_Tools::checkObjects(anObjects, hasResult, hasFeature, hasParameter, hasSubFeature);
1034 if (!(hasFeature || hasParameter))
1037 // 1. start operation
1038 QString aDescription = contextMenuMgr()->action("DELETE_CMD")->text();
1039 aDescription += tr(" %1");
1040 QStringList aObjectNames;
1041 foreach (ObjectPtr aObj, anObjects) {
1042 if (!aObj->data()->isValid())
1044 aObjectNames << QString::fromStdString(aObj->data()->name());
1046 aDescription = aDescription.arg(aObjectNames.join(", "));
1048 SessionPtr aMgr = ModelAPI_Session::get();
1049 aMgr->startOperation(aDescription.toStdString());
1050 // 2. close the documents of the removed parts if the result part is in a list of selected objects
1051 // this is performed in the RemoveFeature of Part object.
1052 /*foreach (ObjectPtr aObj, anObjects)
1054 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1056 DocumentPtr aDoc = aObj->document();
1057 if (aDoc == aMgr->activeDocument()) {
1062 // 3. delete objects
1063 QMainWindow* aDesktop = isSalomeMode() ? salomeConnector()->desktop() : myMainWindow;
1064 std::set<FeaturePtr> anIgnoredFeatures;
1065 if (deleteFeatures(anObjects, anIgnoredFeatures, aDesktop, true)) {
1066 myDisplayer->updateViewer();
1067 aMgr->finishOperation();
1068 updateCommandStatus();
1071 aMgr->abortOperation();
1075 //**************************************************************
1076 void XGUI_Workshop::moveObjects()
1078 if (!isActiveOperationAborted())
1081 SessionPtr aMgr = ModelAPI_Session::get();
1083 QString anActionId = "MOVE_CMD";
1084 QString aDescription = contextMenuMgr()->action(anActionId)->text();
1085 aMgr->startOperation(aDescription.toStdString());
1087 QObjectPtrList anObjects = mySelector->selection()->selectedObjects();
1088 DocumentPtr anActiveDocument = aMgr->activeDocument();
1090 FeaturePtr aCurrentFeature = anActiveDocument->currentFeature(true);
1091 foreach (ObjectPtr aObject, anObjects) {
1092 if (!myModule->canApplyAction(aObject, anActionId))
1095 FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
1096 if (aFeature.get()) {
1097 anActiveDocument->moveFeature(aFeature, aCurrentFeature);
1098 aCurrentFeature = anActiveDocument->currentFeature(true);
1101 aMgr->finishOperation();
1104 //**************************************************************
1105 bool XGUI_Workshop::deleteFeatures(const QObjectPtrList& theList,
1106 const std::set<FeaturePtr>& theIgnoredFeatures,
1108 const bool theAskAboutDeleteReferences)
1112 QObjectPtrList::const_iterator aDIt = theList.begin(), aDLast = theList.end();
1113 for (; aDIt != aDLast; ++aDIt) {
1114 aDInfo.append(ModuleBase_Tools::objectInfo((*aDIt)));
1116 QString anInfoStr = aDInfo.join(", ");
1117 qDebug(QString("deleteFeatures: %1, %2").arg(theList.size()).arg(anInfoStr).toStdString().c_str());
1120 // 1. find all referenced features
1121 std::set<FeaturePtr> aRefFeatures;
1122 foreach (ObjectPtr aDeletedObj, theList) {
1123 XGUI_Tools::refsToFeatureInAllDocuments(aDeletedObj, aDeletedObj, aRefFeatures);
1125 // 2. warn about the references remove, break the delete operation if the user chose it
1126 if (theAskAboutDeleteReferences && !aRefFeatures.empty()) {
1127 QStringList aRefNames;
1128 std::set<FeaturePtr>::const_iterator anIt = aRefFeatures.begin(),
1129 aLast = aRefFeatures.end();
1130 for (; anIt != aLast; anIt++) {
1131 aRefNames.append((*anIt)->name().c_str());
1133 QString aNames = aRefNames.join(", ");
1135 QMessageBox::StandardButton aRes = QMessageBox::warning(
1136 theParent, tr("Delete features"),
1137 QString(tr("Selected features are used in the following features: %1.\
1138 These features will be deleted also. Would you like to continue?")).arg(aNames),
1139 QMessageBox::No | QMessageBox::Yes, QMessageBox::No);
1140 if (aRes != QMessageBox::Yes)
1144 // 3. remove referenced features
1145 std::set<FeaturePtr>::const_iterator anIt = aRefFeatures.begin(),
1146 aLast = aRefFeatures.end();
1150 for (; anIt != aLast; anIt++) {
1151 FeaturePtr aFeature = (*anIt);
1152 DocumentPtr aDoc = aFeature->document();
1153 if (theIgnoredFeatures.find(aFeature) == theIgnoredFeatures.end()) {
1154 aDoc->removeFeature(aFeature);
1156 anInfo.append(ModuleBase_Tools::objectInfo(aFeature).toStdString().c_str());
1161 qDebug(QString("remove references:%1").arg(anInfo.join("; ")).toStdString().c_str());
1165 QString anActionId = "DELETE_CMD";
1166 QString anId = QString::fromStdString(anActionId.toStdString().c_str());
1167 QStringList anObjectGroups = contextMenuMgr()->actionObjectGroups(anId);
1168 // 4. remove the parameter features
1169 foreach (ObjectPtr aObj, theList) {
1170 // features and parameters can be removed here,
1171 // the results are removed only by a corresponded feature remove
1172 std::string aGroupName = aObj->groupName();
1173 if (!anObjectGroups.contains(aGroupName.c_str()))
1176 if (!myModule->canApplyAction(aObj, anActionId))
1179 FeaturePtr aFeature = ModelAPI_Feature::feature(aObj);
1181 /*// TODO: to learn the workshop to delegate the Part object deletion to the PartSet module
1182 // part features are removed in the PartSet module. This condition should be moved there
1183 if (aFeature->getKind() == "Part")
1186 DocumentPtr aDoc = aObj->document();
1187 if (theIgnoredFeatures.find(aFeature) == theIgnoredFeatures.end()) {
1189 QString anInfoStr = ModuleBase_Tools::objectInfo(aFeature);
1190 anInfo.append(anInfoStr);
1191 qDebug(QString("remove feature :%1").arg(anInfoStr).toStdString().c_str());
1193 aDoc->removeFeature(aFeature);
1198 qDebug(QString("remove features:%1").arg(anInfo.join("; ")).toStdString().c_str());
1203 bool hasResults(QObjectPtrList theObjects, const std::set<std::string>& theTypes)
1205 bool isFoundResultType = false;
1206 foreach(ObjectPtr anObj, theObjects)
1208 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObj);
1209 if (aResult.get() == NULL)
1212 isFoundResultType = theTypes.find(aResult->groupName()) != theTypes.end();
1213 if (isFoundResultType)
1216 return isFoundResultType;
1219 //**************************************************************
1220 // Returns the list of features placed between theObject and the current feature
1221 // in the same document. Excludes theObject, includes the current feature.
1222 std::list<FeaturePtr> toCurrentFeatures(const ObjectPtr& theObject)
1224 std::list<FeaturePtr> aResult;
1225 DocumentPtr aDocument = theObject->document();
1226 std::list<FeaturePtr> anAllFeatures = aDocument->allFeatures();
1227 // find the object iterator
1228 std::list<FeaturePtr>::iterator aObjectIt = std::find(anAllFeatures.begin(), anAllFeatures.end(), theObject);
1229 if (aObjectIt == anAllFeatures.end())
1231 // find the current feature iterator
1232 std::list<FeaturePtr>::iterator aCurrentIt = std::find(anAllFeatures.begin(), anAllFeatures.end(), aDocument->currentFeature(true));
1233 if (aCurrentIt == anAllFeatures.end())
1235 // check the right order
1236 if (std::distance(aObjectIt, anAllFeatures.end()) <= std::distance(aCurrentIt, anAllFeatures.end()))
1238 // exclude the object
1239 std::advance(aObjectIt, 1);
1240 // include the current feature
1241 std::advance(aCurrentIt, 1);
1242 return std::list<FeaturePtr>(aObjectIt, aCurrentIt);
1245 bool XGUI_Workshop::canMoveFeature()
1247 QString anActionId = "MOVE_CMD";
1249 QObjectPtrList aObjects = mySelector->selection()->selectedObjects();
1250 QObjectPtrList aValidatedObjects;
1251 foreach (ObjectPtr aObject, aObjects) {
1252 if (myModule->canApplyAction(aObject, anActionId))
1253 aValidatedObjects.append(aObject);
1255 if (aValidatedObjects.size() != aObjects.size())
1256 aObjects = aValidatedObjects;
1258 bool aCanMove = !aObjects.empty();
1260 QObjectPtrList::const_iterator anIt = aObjects.begin(), aLast = aObjects.end();
1261 for (; anIt != aLast && aCanMove; anIt++) {
1262 ObjectPtr aObject = *anIt;
1263 // 1. Get features placed between selected and current in the document
1264 std::list<FeaturePtr> aFeaturesBetween = toCurrentFeatures(aObject);
1265 // if aFeaturesBetween is empty it means wrong order or aObject is the current feature
1266 if (aFeaturesBetween.empty())
1269 std::set<FeaturePtr> aPlacedFeatures(aFeaturesBetween.begin(), aFeaturesBetween.end());
1270 // 2. Get all reference features to the selected object in the document
1271 std::set<FeaturePtr> aRefFeatures;
1272 XGUI_Tools::refsToFeatureInFeatureDocument(aObject, aRefFeatures);
1274 if (aRefFeatures.empty())
1277 // 3. Find any placed features in all reference features
1278 std::set<FeaturePtr> aIntersectionFeatures;
1279 std::set_intersection(aRefFeatures.begin(), aRefFeatures.end(),
1280 aPlacedFeatures.begin(), aPlacedFeatures.end(),
1281 std::inserter(aIntersectionFeatures, aIntersectionFeatures.begin()));
1282 // 4. Return false if any reference feature is placed before curent feature
1283 if (!aIntersectionFeatures.empty())
1291 //**************************************************************
1292 bool XGUI_Workshop::canChangeColor() const
1294 QObjectPtrList aObjects = mySelector->selection()->selectedObjects();
1296 std::set<std::string> aTypes;
1297 aTypes.insert(ModelAPI_ResultGroup::group());
1298 aTypes.insert(ModelAPI_ResultConstruction::group());
1299 aTypes.insert(ModelAPI_ResultBody::group());
1300 aTypes.insert(ModelAPI_ResultPart::group());
1302 return hasResults(aObjects, aTypes);
1305 void setColor(ResultPtr theResult, std::vector<int>& theColor)
1307 if (!theResult.get())
1310 AttributeIntArrayPtr aColorAttr = theResult->data()->intArray(ModelAPI_Result::COLOR_ID());
1311 if (aColorAttr.get() != NULL) {
1312 if (!aColorAttr->size()) {
1313 aColorAttr->setSize(3);
1315 aColorAttr->setValue(0, theColor[0]);
1316 aColorAttr->setValue(1, theColor[1]);
1317 aColorAttr->setValue(2, theColor[2]);
1321 //**************************************************************
1322 void XGUI_Workshop::changeColor(const QObjectPtrList& theObjects)
1324 AttributeIntArrayPtr aColorAttr;
1325 // 1. find the current color of the object. This is a color of AIS presentation
1326 // The objects are iterated until a first valid color is found
1327 std::vector<int> aColor;
1328 foreach(ObjectPtr anObject, theObjects) {
1329 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObject);
1331 XGUI_CustomPrs::getResultColor(aResult, aColor);
1333 // TODO: remove the obtaining a color from the AIS object
1334 // this does not happen never because:
1335 // 1. The color can be changed only on results
1336 // 2. The result can be not visualized in the viewer(e.g. Origin Construction)
1337 AISObjectPtr anAISObj = myDisplayer->getAISObject(anObject);
1338 if (anAISObj.get()) {
1340 anAISObj->getColor(aColor[0], aColor[1], aColor[2]);
1343 if (!aColor.empty())
1346 if (aColor.size() != 3)
1349 // 2. show the dialog to change the value
1350 XGUI_ColorDialog* aDlg = new XGUI_ColorDialog(mainWindow());
1351 aDlg->setColor(aColor);
1352 aDlg->move(QCursor::pos());
1353 bool isDone = aDlg->exec() == QDialog::Accepted;
1357 bool isRandomColor = aDlg->isRandomColor();
1359 // 3. abort the previous operation and start a new one
1360 SessionPtr aMgr = ModelAPI_Session::get();
1361 bool aWasOperation = aMgr->isOperation(); // keep this value
1362 if (!aWasOperation) {
1363 QString aDescription = contextMenuMgr()->action("COLOR_CMD")->text();
1364 aMgr->startOperation(aDescription.toStdString());
1367 // 4. set the value to all results
1368 foreach(ObjectPtr anObj, theObjects) {
1369 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObj);
1370 if (aResult.get() != NULL) {
1371 std::vector<int> aColorResult = aDlg->getColor();
1372 setColor(aResult, aColorResult);
1376 aMgr->finishOperation();
1377 updateCommandStatus();
1380 //**************************************************************
1381 #define SET_DISPLAY_GROUP(aGroupName, aDisplay) \
1382 for (int i = 0; i < aDoc->size(aGroupName); i++) { \
1383 aDoc->object(aGroupName, i)->setDisplayed(aDisplay); \
1385 void XGUI_Workshop::showObjects(const QObjectPtrList& theList, bool isVisible)
1387 foreach (ObjectPtr aObj, theList) {
1389 ResultPartPtr aPartRes = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1391 DocumentPtr aDoc = aPartRes->partDoc();
1392 SET_DISPLAY_GROUP(ModelAPI_ResultBody::group(), isVisible)
1393 SET_DISPLAY_GROUP(ModelAPI_ResultConstruction::group(), isVisible)
1394 SET_DISPLAY_GROUP(ModelAPI_ResultGroup::group(), isVisible)
1397 aObj->setDisplayed(isVisible);
1400 Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
1403 //**************************************************************
1404 void XGUI_Workshop::showOnlyObjects(const QObjectPtrList& theList)
1406 // Hide all displayed objects
1407 QObjectPtrList aList = myDisplayer->displayedObjects();
1408 foreach (ObjectPtr aObj, aList)
1409 aObj->setDisplayed(false);
1411 // Show only objects from the list
1412 foreach (ObjectPtr aObj, theList) {
1414 ResultPartPtr aPartRes = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
1416 DocumentPtr aDoc = aPartRes->partDoc();
1417 SET_DISPLAY_GROUP(ModelAPI_ResultBody::group(), true)
1418 SET_DISPLAY_GROUP(ModelAPI_ResultConstruction::group(), true)
1419 SET_DISPLAY_GROUP(ModelAPI_ResultGroup::group(), true)
1422 aObj->setDisplayed(true);
1425 Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
1430 //**************************************************************
1431 void XGUI_Workshop::registerValidators() const
1433 SessionPtr aMgr = ModelAPI_Session::get();
1434 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
1437 //**************************************************************
1438 /*void XGUI_Workshop::displayAllResults()
1440 SessionPtr aMgr = ModelAPI_Session::get();
1441 DocumentPtr aRootDoc = aMgr->moduleDocument();
1442 displayDocumentResults(aRootDoc);
1443 for (int i = 0; i < aRootDoc->size(ModelAPI_ResultPart::group()); i++) {
1444 ObjectPtr aObject = aRootDoc->object(ModelAPI_ResultPart::group(), i);
1445 ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
1446 displayDocumentResults(aPart->partDoc());
1448 myDisplayer->updateViewer();
1451 //**************************************************************
1452 void XGUI_Workshop::displayDocumentResults(DocumentPtr theDoc)
1456 displayGroupResults(theDoc, ModelAPI_ResultConstruction::group());
1457 displayGroupResults(theDoc, ModelAPI_ResultBody::group());
1460 //**************************************************************
1461 void XGUI_Workshop::displayGroupResults(DocumentPtr theDoc, std::string theGroup)
1463 for (int i = 0; i < theDoc->size(theGroup); i++)
1464 theDoc->object(theGroup, i)->setDisplayed(true);
1465 //displayObject(theDoc->object(theGroup, i));
1466 Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
1469 //**************************************************************
1470 void XGUI_Workshop::setDisplayMode(const QObjectPtrList& theList, int theMode)
1472 foreach(ObjectPtr aObj, theList) {
1473 myDisplayer->setDisplayMode(aObj, (XGUI_Displayer::DisplayMode)theMode, false);
1475 if (theList.size() > 0)
1476 myDisplayer->updateViewer();
1479 //**************************************************************
1480 void XGUI_Workshop::closeDocument()
1482 ModuleBase_Operation* anOperation = operationMgr()->currentOperation();
1483 while (anOperation) {
1484 anOperation->abort();
1485 anOperation = operationMgr()->currentOperation();
1487 myDisplayer->closeLocalContexts();
1488 myDisplayer->eraseAll();
1489 objectBrowser()->clearContent();
1491 SessionPtr aMgr = ModelAPI_Session::get();
1495 void XGUI_Workshop::addHistoryMenu(QObject* theObject, const char* theSignal, const char* theSlot)
1497 XGUI_HistoryMenu* aMenu = NULL;
1498 if (isSalomeMode()) {
1499 QAction* anAction = qobject_cast<QAction*>(theObject);
1502 aMenu = new XGUI_HistoryMenu(anAction);
1504 QToolButton* aButton = qobject_cast<QToolButton*>(theObject);
1505 aMenu = new XGUI_HistoryMenu(aButton);
1507 connect(this, theSignal, aMenu, SLOT(setHistory(const QList<ActionInfo>&)));
1508 connect(aMenu, SIGNAL(actionSelected(int)), this, theSlot);
1511 QList<ActionInfo> XGUI_Workshop::processHistoryList(const std::list<std::string>& theList) const
1513 QList<ActionInfo> aResult;
1514 std::list<std::string>::const_iterator it = theList.cbegin();
1515 for (; it != theList.cend(); it++) {
1516 QString anId = QString::fromStdString(*it);
1517 bool isEditing = anId.endsWith(ModuleBase_Operation::EditSuffix());
1519 anId.chop(ModuleBase_Operation::EditSuffix().size());
1522 QAction* aContextMenuAct = myContextMenuMgr->actionByName(anId);
1523 if (aContextMenuAct) {
1524 anInfo.initFrom(aContextMenuAct);
1526 anInfo = myActionsMgr->actionInfoById(anId);
1529 anInfo.text = anInfo.text.prepend("Modify ");