1 <!-- Copyright (C) 2014-20xx CEA/DEN, EDF R&D -->
4 <workbench id="Sketch">
8 nested="SketchPoint SketchIntersectionPoint SketchLine SketchCircle SketchArc SketchRectangle SketchConstraintLength SketchConstraintRadius SketchConstraintDistance SketchConstraintParallel SketchConstraintPerpendicular SketchConstraintRigid SketchConstraintHorizontal SketchConstraintVertical SketchConstraintEqual SketchConstraintTangent SketchConstraintFillet SketchConstraintCoincidence SketchConstraintMirror SketchConstraintAngle SketchMultiRotation SketchMultiTranslation SketchConstraintCollinear SketchConstraintMiddle"
9 when_nested="accept abort"
11 tooltip="Create sketch"
12 icon="icons/Sketch/sketch.png">
13 <sketch-start-label id="External" title="Select a plane on which to create a sketch" tooltip="Select a plane on which to create a sketch">
14 <validator id="GeomValidators_Face" parameters="plane"/>
16 <error_label id="SolverError"/>
17 <validator id="SketchPlugin_SolverErrorValidator"/>
21 <feature id="SketchPoint" title="Point" tooltip="Create point" icon="icons/Sketch/point.png">
22 <sketch-2dpoint_selector id="PointCoordindates" accept_expressions="0" title="Point" tooltip="Point coordinates"/>
23 <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
27 <feature id="SketchLine" title="Line" tooltip="Create line" icon="icons/Sketch/line.png">
28 <sketch-2dpoint_selector id="StartPoint" accept_expressions="0" title="Start point" tooltip="Start point coordinates" previous_feature_param="EndPoint"/>
29 <sketch-2dpoint_selector id="EndPoint" accept_expressions="0" title="End point" tooltip="End point coordinates"/>
30 <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
31 <validator id="GeomValidators_Different" parameters="StartPoint,EndPoint"/>
38 tooltip="Create circle"
39 icon="icons/Sketch/circle.png">
40 <toolbox id="CircleType">
41 <box id="CenterRadius" title="Center and radius" icon="icons/Sketch/circle_pt_rad_32x32.png">
42 <sketch-2dpoint_selector id="CircleCenter" accept_expressions="0" title="Center" tooltip="Center coordinates"/>
43 <point2ddistance id="CircleRadius" accept_expressions="0" first_point="CircleCenter" label="Radius:" min="0" step="1.0" default="0" icon="icons/Sketch/radius.png" tooltip="Set radius">
44 <validator id="GeomValidators_Positive"/>
47 <box id="ThreePoints" title="Three points" icon="icons/Sketch/circle_3pt_32x32.png">
48 <sketch-2dpoint_selector id="FirstPoint" accept_expressions="0" title="First point" tooltip="First point"/>
49 <sketch-2dpoint_selector id="SecondPoint" accept_expressions="0" title="Second point" tooltip="Second point"/>
50 <sketch-2dpoint_selector id="ThirdPoint" accept_expressions="0" title="Third point" tooltip="Third point"/>
53 <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
61 icon="icons/Sketch/arc.png">
62 <toolbox id="ArcType">
63 <box id="CenterStartEnd" title="Center and two points" icon="icons/Sketch/arc_base_32x32.png">
64 <sketch-2dpoint_selector id="ArcCenter" accept_expressions="0" title="Center" tooltip="Center of a circle"/>
65 <sketch-2dpoint_selector id="ArcStartPoint" accept_expressions="0" title="Start point" tooltip="Start point"/>
66 <sketch-2dpoint_selector id="ArcEndPoint" accept_expressions="0" title="End point" tooltip="End point"/>
67 <validator id="GeomValidators_Different" parameters="ArcCenter,ArcStartPoint,ArcEndPoint"/>
69 <box id="ThreePoints" title="Three points on arc" icon="icons/Sketch/arc_3pt_32x32.png">
70 <sketch-2dpoint_selector id="ArcStartPoint" accept_expressions="0" title="Start point" tooltip="Start point"/>
71 <sketch-2dpoint_selector id="ArcEndPoint" accept_expressions="0" title="End point" tooltip="End point"/>
72 <sketch-2dpoint_selector id="ArcPassedPoint" accept_expressions="0" title="Passed point" tooltip="Passed point"/>
73 <validator id="GeomValidators_Different" parameters="ArcStartPoint,ArcEndPoint,ArcPassedPoint"/>
75 <box id="Tangent" title="Tangent with edge" icon="icons/Sketch/arc_tang_32x32.png">
76 <sketch_shape_selector id="ArcTangentPoint" label="Start point" tooltip="Select point on line" shape_types="vertex">
77 <validator id="SketchPlugin_ArcTangentPoint" parameters="" />
78 </sketch_shape_selector>
79 <sketch-2dpoint_selector id="ArcEndPoint" accept_expressions="0" title="End point" tooltip="End point"/>
82 <doublevalue id="ArcRadius" accept_expressions="0" label="Radius:" default="computed" icon="icons/Sketch/radius.png" tooltip="Set radius" obligatory="0">
83 <validator id="GeomValidators_Positive"/>
85 <doublevalue id="ArcAngle" label="Angle:" icon="icons/Sketch/angle.png" tooltip="Set angle" default="90" use_reset="false" obligatory="0"/>
86 <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
89 <!-- SketchConstraintFillet -->
90 <feature id="SketchConstraintFillet" title="Fillet" tooltip="Create constraint defining fillet between two objects" icon="icons/Sketch/fillet.png">
91 <!--<sketch_shape_selector id="ConstraintEntityA"
92 label="Point" tooltip="Select point for fillet (should be shared by two entities only)" shape_types="vertex">
93 <validator id="SketchPlugin_FilletVertexValidator"/>
94 </sketch_shape_selector>-->
95 <sketch_multi_selector id="ConstraintEntityA"
97 tooltip="Select points for fillets"
98 type_choice="Vertices"
100 <validator id="SketchPlugin_FilletVertexValidator"/>
101 </sketch_multi_selector>
102 <doublevalue label="Radius" tooltip="Fillet arc radius" id="ConstraintValue" accept_expressions="0" min="0" use_reset="false">
103 <validator id="GeomValidators_Positive"/>
105 <validator id="PartSet_FilletSelection"/>
109 <!--<group id="Projection"> -->
110 <!-- Intersection Point -->
112 id="SketchIntersectionPoint"
113 title="Intersection Point"
114 tooltip="Create intersection point"
115 icon="icons/Sketch/intersection_point.png">
116 <sketch_shape_selector
119 tooltip="Select external line."
122 use_sketch_plane="false">
123 <validator id="GeomValidators_ShapeType" parameters="line"/>
124 <validator id="SketchPlugin_IntersectionValidator"/>
125 </sketch_shape_selector>
126 <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
130 <group id="Replication">
131 <!-- SketchConstraintMirror -->
133 id="SketchConstraintMirror"
134 title="Mirror" icon="icons/Sketch/mirror.png"
135 tooltip="Create constraint, mirroring group of objects">
136 <sketch_shape_selector id="ConstraintEntityA"
137 label="Mirror line" tooltip="Select mirror line" shape_types="edge">
138 <validator id="GeomValidators_ShapeType" parameters="line"/>
139 </sketch_shape_selector>
140 <sketch_multi_selector id="ConstraintMirrorList"
142 tooltip="Select list of mirroring objects"
146 <validator id="SketchPlugin_MirrorAttr" />
147 </sketch_multi_selector>
150 <!-- SketchMultiTranslation -->
152 id="SketchMultiTranslation"
153 title="Translation" icon="icons/Sketch/translate.png"
154 tooltip="Multiple translation">
155 <sketch_multi_selector id="MultiTranslationList"
157 tooltip="Select list of translating objects"
161 <validator id="SketchPlugin_CopyValidator" />
162 </sketch_multi_selector>
163 <toolbox id="ValueType">
164 <box id="SingleValue" title="Single value" icon="icons/Sketch/translate_32x32.png">
165 <groupbox title="Direction">
166 <sketch_shape_selector
167 id="MultiTranslationStartPoint"
169 tooltip="Start point of translation"
170 shape_types="vertex">
171 <validator id="PartSet_DifferentObjects"/>
172 <validator id="GeomValidators_ShapeType" parameters="vertex"/>
173 </sketch_shape_selector>
174 <sketch_shape_selector
175 id="MultiTranslationEndPoint"
177 tooltip="Final point of translation"
178 shape_types="vertex">
179 <validator id="PartSet_DifferentObjects"/>
180 <validator id="GeomValidators_ShapeType" parameters="vertex"/>
181 </sketch_shape_selector>
184 <box id="FullValue" title="Full value" icon="icons/Sketch/translate_full_32x32.png">
185 <groupbox title="Direction">
186 <sketch_shape_selector
187 id="MultiTranslationStartPoint"
189 tooltip="Start point of translation"
190 shape_types="vertex">
191 <validator id="PartSet_DifferentObjects"/>
192 <validator id="GeomValidators_ShapeType" parameters="vertex"/>
193 </sketch_shape_selector>
194 <sketch_shape_selector
195 id="MultiTranslationEndPoint"
197 tooltip="Final point of translation"
198 shape_types="vertex">
199 <validator id="PartSet_DifferentObjects"/>
200 <validator id="GeomValidators_ShapeType" parameters="vertex"/>
201 </sketch_shape_selector>
205 <integervalue id="MultiTranslationObjects"
206 label="Total number of objects"
207 tooltip="Total number of objects"
208 default="2" min="2" use_reset="false">
209 <validator id="GeomValidators_Positive"/>
213 <!-- SketchMultiRotation -->
215 id="SketchMultiRotation"
216 title="Rotation" icon="icons/Sketch/rotate.png"
217 tooltip="Multiple rotation">
218 <sketch_multi_selector id="MultiRotationList"
220 tooltip="Select list of rotating objects"
224 <validator id="SketchPlugin_CopyValidator" />
225 </sketch_multi_selector>
226 <sketch_shape_selector
227 id="MultiRotationCenter"
228 label="Center of rotation"
229 tooltip="Center of rotation"
230 shape_types="vertex">
231 <validator id="GeomValidators_ShapeType" parameters="vertex"/>
232 </sketch_shape_selector>
233 <toolbox id="AngleType">
234 <box id="SingleAngle" title="Single angle" icon="icons/Sketch/angle_up_32x32.png">
235 <doublevalue id="MultiRotationAngle"
237 icon="icons/Sketch/angle.png"
238 tooltip="Rotation angle"
239 default="90" use_reset="false"/>
241 <box id="FullAngle" title="Full angle" icon="icons/Sketch/angle_up_full_32x32.png">
242 <doublevalue id="MultiRotationAngle"
244 icon="icons/Sketch/angle.png"
245 tooltip="Rotation angle"
246 default="90" use_reset="false"/>
249 <integervalue id="MultiRotationObjects"
250 label="Total number of objects"
251 tooltip="Total number of objects"
252 default="2" min="2" use_reset="false">
253 <validator id="GeomValidators_Positive"/>
258 <group id="Dimensional constraints">
259 <!-- SketchConstraintDistance -->
261 id="SketchConstraintDistance"
263 tooltip="Set fixed distance from a point to an object"
264 icon="icons/Sketch/distance.png">
265 <label title="Select objects for distance definition. Following objects can be accepted: point, line or arc end point, center of circle or arc."/>
266 <sketch_shape_selector
267 id="ConstraintEntityA"
269 tooltip="Select point, line end point, line, center of circle or arc."
270 shape_types="edge vertex">
271 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
272 <validator id="PartSet_DifferentObjects"/>
273 <validator id="GeomValidators_ShapeType" parameters="vertex,line"/>
274 </sketch_shape_selector>
275 <sketch_shape_selector
276 id="ConstraintEntityB"
277 label="Second object"
278 tooltip="Select point, line end point, line, center of circle or arc."
279 shape_types="edge vertex">
280 <validator id="PartSet_DifferentObjects"/>
281 <validator id="SketchPlugin_DistanceAttr" parameters="ConstraintEntityA"/>
282 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
283 <validator id="GeomValidators_ShapeType" parameters="vertex,line"/>
284 </sketch_shape_selector>
285 <sketch-2dpoint_flyout_selector id="ConstraintFlyoutValuePnt" default="computed" internal="1" obligatory="0"/>
287 <doublevalue_editor label="Value" tooltip="Distance" id="ConstraintValue" default="computed" min="0">
288 <validator id="GeomValidators_Positive"/>
289 </doublevalue_editor>
291 <validator id="PartSet_DistanceSelection"/>
294 <!-- SketchConstraintLength -->
295 <feature id="SketchConstraintLength" title="Length" tooltip="Set fixed length of a line segment" icon="icons/Sketch/length.png">
296 <label title="Select a line on which to calculate length" tooltip="Select a line on which to calculate length"/>
297 <shape_selector id="ConstraintEntityA" label="Line" tooltip="Select an line" shape_types="edge" >
298 <validator id="GeomValidators_ShapeType" parameters="line"/>
300 <sketch-2dpoint_flyout_selector id="ConstraintFlyoutValuePnt" default="computed" internal="1" obligatory="0"/>
301 <doublevalue_editor label="Value" tooltip="Length" id="ConstraintValue" default="computed">
302 <validator id="GeomValidators_Positive"/>
303 </doublevalue_editor>
304 <validator id="PartSet_LengthSelection"/>
307 <!-- SketchConstraintAngle -->
308 <feature id="SketchConstraintAngle" title="Angle" tooltip="Set fixed angle between two line segments" icon="icons/Sketch/angle_constr.png">
309 <sketch_shape_selector id="ConstraintEntityA" label="Line 1" tooltip="Select an line" shape_types="edge" >
310 <validator id="GeomValidators_ShapeType" parameters="line"/>
311 <validator id="PartSet_DifferentObjects"/>
312 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
313 </sketch_shape_selector>
314 <sketch_shape_selector id="ConstraintEntityB" label="Line 2" tooltip="Select an line" shape_types="edge" >
315 <validator id="GeomValidators_ShapeType" parameters="line"/>
316 <validator id="PartSet_DifferentObjects"/>
317 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
318 </sketch_shape_selector>
319 <sketch-2dpoint_flyout_selector id="ConstraintFlyoutValuePnt" default="computed" internal="1" obligatory="0"/>
320 <doublevalue_editor label="Value" tooltip="Angle" id="AngleValue" default="computed" min="0" max="360" />
321 <validator id="PartSet_AngleSelection"/>
322 <module_choice id="AngleType"
323 widget_type="radiobuttons"
324 buttons_dir="horizontal"
326 tooltip="Type of angle"
327 string_list="Direct Complementary Additional"
328 icons_list="icons/Sketch/angle_direct.png icons/Sketch/angle_complementary.png icons/Sketch/angle_backward.png"
333 <!-- SketchConstraintRadius -->
334 <feature id="SketchConstraintRadius" title="Radius" tooltip="Set fixed radius of a circle or an arc" icon="icons/Sketch/radius_constr.png">
335 <label title="Select a circle or an arc on which to calculate radius" tooltip="Select a circle or an arc on which to calculate radius"/>
336 <shape_selector id="ConstraintEntityA" label="Circle or Arc" tooltip="Select a circle or an arc"
338 <validator id="GeomValidators_ShapeType" parameters="circle"/>
340 <sketch-2dpoint_flyout_selector id="ConstraintFlyoutValuePnt" default="computed" internal="1" obligatory="0"/>
341 <doublevalue_editor label="Value" tooltip="Radius" id="ConstraintValue" default="computed">
342 <validator id="GeomValidators_Positive"/>
343 </doublevalue_editor>
344 <validator id="PartSet_RadiusSelection"/>
349 <group id="Geometrical constraints">
351 <!-- SketchConstraintHorizontal -->
352 <feature id="SketchConstraintHorizontal" title="Horizontal" tooltip="Create constraint defining horizontal line" icon="icons/Sketch/horisontal.png">
353 <sketch_shape_selector id="ConstraintEntityA"
354 label="Line" tooltip="Select a line" shape_types="edge" use_external="false">
355 <validator id="GeomValidators_ShapeType" parameters="line"/>
356 </sketch_shape_selector>
357 <validator id="PartSet_HVDirSelection"/>
360 <!-- SketchConstraintVertical -->
361 <feature id="SketchConstraintVertical" title="Vertical" tooltip="Create constraint defining vertical line" icon="icons/Sketch/vertical.png">
362 <sketch_shape_selector id="ConstraintEntityA"
363 label="Line" tooltip="Select a line" shape_types="edge" use_external="false">
364 <validator id="GeomValidators_ShapeType" parameters="line"/>
365 </sketch_shape_selector>
366 <validator id="PartSet_HVDirSelection"/>
369 <!-- SketchConstraintRigid -->
370 <feature id="SketchConstraintRigid" title="Fixed" tooltip="Fix an object" icon="icons/Sketch/fixed.png">
371 <sketch_shape_selector id="ConstraintEntityA" label="Object"
372 tooltip="Select point, line end point, line, center of circle or arc."
373 shape_types="edge vertex">
374 <validator id="GeomValidators_ShapeType" parameters="vertex,line,circle"/>
375 <validator id="SketchPlugin_NotFixed"/>
376 </sketch_shape_selector>
377 <validator id="PartSet_RigidSelection"/>
380 <!-- SketchConstraintParallel -->
381 <feature id="SketchConstraintParallel" title="Parallel" tooltip="Create constraint defining two parallel lines"
382 icon="icons/Sketch/parallel.png">
383 <sketch_shape_selector id="ConstraintEntityA"
384 label="First line" tooltip="Select a line" shape_types="edge">
385 <validator id="GeomValidators_ShapeType" parameters="line"/>
386 <validator id="PartSet_DifferentObjects"/>
387 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
388 </sketch_shape_selector>
390 <sketch_shape_selector id="ConstraintEntityB" label="Second line" tooltip="Select a line"
392 <validator id="GeomValidators_ShapeType" parameters="line"/>
393 <validator id="PartSet_DifferentObjects"/>
394 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
395 </sketch_shape_selector>
396 <validator id="PartSet_ParallelSelection"/>
399 <!-- SketchConstraintPerpendicular -->
400 <feature id="SketchConstraintPerpendicular" title="Perpendicular"
401 tooltip="Create constraint defining two perpendicular lines"
402 icon="icons/Sketch/perpendicular.png">
403 <sketch_shape_selector id="ConstraintEntityA"
404 label="First line" tooltip="Select an line"
406 <validator id="PartSet_DifferentObjects"/>
407 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
408 <validator id="GeomValidators_ShapeType" parameters="line"/>
409 </sketch_shape_selector>
411 <sketch_shape_selector id="ConstraintEntityB"
412 label="Second line" tooltip="Select an line"
414 <validator id="PartSet_DifferentObjects"/>
415 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
416 <validator id="GeomValidators_ShapeType" parameters="line"/>
417 </sketch_shape_selector>
418 <validator id="PartSet_PerpendicularSelection"/>
421 <!-- SketchConstraintTangent -->
422 <feature id="SketchConstraintTangent" title="Tangent" tooltip="Create constraint defining tangency of two objects with common coincident point" icon="icons/Sketch/tangent.png">
423 <sketch_shape_selector id="ConstraintEntityA"
424 label="First object" tooltip="Select line or arc" shape_types="edge">
425 <validator id="SketchPlugin_TangentAttr" parameters="ConstraintEntityB"/>
426 <validator id="PartSet_DifferentObjects"/>
427 </sketch_shape_selector>
429 <sketch_shape_selector id="ConstraintEntityB"
430 label="Second object" tooltip="Select line or arc" shape_types="edge">
431 <validator id="SketchPlugin_TangentAttr" parameters="ConstraintEntityA"/>
432 <validator id="PartSet_DifferentObjects"/>
433 </sketch_shape_selector>
434 <validator id="PartSet_TangentSelection"/>
437 <!-- SketchConstraintCoincidence -->
438 <feature id="SketchConstraintCoincidence" title="Coincident" tooltip="Create constraint for the coincidence of two points or point on line or circle" icon="icons/Sketch/coincedence.png">
439 <sketch_shape_selector id="ConstraintEntityA" label="First object" tooltip="Select a first object" shape_types="vertex edge">
440 <validator id="PartSet_DifferentObjects"/>
441 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
442 </sketch_shape_selector>
443 <sketch_shape_selector id="ConstraintEntityB" label="Second object" tooltip="Select a second object" shape_types="vertex edge">
444 <validator id="PartSet_DifferentObjects"/>
445 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
446 <validator id="SketchPlugin_CoincidenceAttr" parameters="ConstraintEntityA"/>
447 </sketch_shape_selector>
448 <validator id="PartSet_CoincidentSelection"/>
451 <!-- SketchConstraintMiddle -->
452 <feature id="SketchConstraintMiddle" title="Middle point" tooltip="Create constraint for setting middle point on a line" icon="icons/Sketch/middlepoint.png">
453 <sketch_shape_selector id="ConstraintEntityA" label="First object" tooltip="Select a first object" shape_types="vertex edge">
454 <validator id="PartSet_DifferentObjects"/>
455 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
456 <validator id="SketchPlugin_MiddlePointAttr" parameters="ConstraintEntityB"/>
457 </sketch_shape_selector>
458 <sketch_shape_selector id="ConstraintEntityB" label="Second object" tooltip="Select a second object" shape_types="vertex edge">
459 <validator id="PartSet_DifferentObjects"/>
460 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
461 <validator id="SketchPlugin_MiddlePointAttr" parameters="ConstraintEntityA"/>
462 </sketch_shape_selector>
463 <validator id="PartSet_MiddlePointSelection"/>
466 <!-- SketchConstraintEqual -->
467 <feature id="SketchConstraintEqual" title="Equal"
468 tooltip="Create constraint defining equal lengths of two lines or line and arc or equal radii of two arcs or two circles or arc and circle"
469 icon="icons/Sketch/equal.png">
470 <sketch_shape_selector id="ConstraintEntityA"
471 label="First object" tooltip="Select line, circle or arc" shape_types="edge">
472 <validator id="PartSet_DifferentObjects"/>
473 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
474 </sketch_shape_selector>
476 <sketch_shape_selector id="ConstraintEntityB"
477 label="Second object" tooltip="Select line, circle or arc" shape_types="edge">
478 <validator id="SketchPlugin_EqualAttr" parameters="ConstraintEntityA"/>
479 <validator id="PartSet_DifferentObjects"/>
480 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
481 </sketch_shape_selector>
482 <validator id="PartSet_EqualSelection"/>
485 <!-- SketchConstraintCollinear -->
487 <feature id="SketchConstraintCollinear" title="Collinear" tooltip="Create constraint defining collinearity of two lines" icon="icons/Sketch/collinear.png">
488 <sketch_shape_selector id="ConstraintEntityA"
489 label="First line" tooltip="Select a line" shape_types="edge">
490 <validator id="GeomValidators_ShapeType" parameters="line"/>
491 <validator id="PartSet_DifferentObjects"/>
492 </sketch_shape_selector>
494 <sketch_shape_selector id="ConstraintEntityB"
495 label="Second line" tooltip="Select a line" shape_types="edge">
496 <validator id="GeomValidators_ShapeType" parameters="line"/>
497 <validator id="PartSet_DifferentObjects"/>
498 </sketch_shape_selector>
499 <validator id="PartSet_CollinearSelection"/>