1 <!-- Copyright (C) 2014-20xx CEA/DEN, EDF R&D -->
4 <workbench id="Sketch">
5 <group id="Linear geometry">
8 nested="SketchPoint SketchIntersectionPoint SketchLine SketchCircle SketchArc
11 SketchConstraintLength SketchConstraintRadius SketchConstraintDistance
12 SketchConstraintParallel SketchConstraintPerpendicular
13 SketchConstraintRigid SketchConstraintHorizontal SketchConstraintVertical
14 SketchConstraintEqual SketchConstraintTangent
15 SketchConstraintFillet SketchConstraintSplit SketchTrim
16 SketchConstraintCoincidence
17 SketchConstraintMirror SketchConstraintAngle
18 SketchMultiRotation SketchMultiTranslation
19 SketchConstraintCollinear SketchConstraintMiddle"
20 when_nested="accept abort"
22 tooltip="Create sketch"
23 icon="icons/Sketch/sketch.png">
24 <sketch-start-label id="External" title="Select a plane on which to create a sketch" tooltip="Select a plane on which to create a sketch">
25 <validator id="GeomValidators_Face" parameters="plane"/>
27 <label id="SolverDOF"/>
28 <label id="SolverError" styleSheet="color : red; font : bold"/>
29 <validator id="SketchPlugin_SolverErrorValidator"/>
33 <feature id="SketchPoint" title="Point" tooltip="Create point" icon="icons/Sketch/point.png">
34 <sketch-2dpoint_selector id="PointCoordindates" accept_expressions="0" title="Point" tooltip="Point coordinates"
35 enable_value="enable_by_preferences"/>
36 <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
40 <feature id="SketchLine" title="Line" tooltip="Create line" icon="icons/Sketch/line.png">
41 <sketch-2dpoint_selector id="StartPoint" accept_expressions="0" title="Start point" tooltip="Start point coordinates"
42 enable_value="enable_by_preferences"/>
43 <sketch-2dpoint_selector id="EndPoint" accept_expressions="0" title="End point" tooltip="End point coordinates"
44 enable_value="enable_by_preferences"/>
45 <labelvalue id="LineLength" accept_expressions="0" label="Length:" default="computed" icon="icons/Sketch/distance_value.png"
46 tooltip="Line length" obligatory="0" enable_value="false"/>
47 <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
48 <validator id="GeomValidators_Different" parameters="StartPoint,EndPoint"/>
51 <group id="Circular geometry">
56 tooltip="Create circle"
57 icon="icons/Sketch/circle.png">
58 <toolbox id="CircleType">
59 <box id="CenterRadius" title="Center and radius" icon="icons/Sketch/circle_pt_rad_32x32.png">
60 <sketch-2dpoint_selector id="CircleCenter" accept_expressions="0" title="Center" tooltip="Center coordinates"
61 enable_value="enable_by_preferences"/>
63 <box id="ThreePoints" title="Three points" icon="icons/Sketch/circle_3pt_32x32.png">
64 <sketch-2dpoint_selector id="FirstPoint" accept_expressions="0" title="First point" tooltip="First point"
65 enable_value="enable_by_preferences"/>
66 <sketch-2dpoint_selector id="SecondPoint" accept_expressions="0" title="Second point" tooltip="Second point"
67 enable_value="enable_by_preferences"/>
68 <sketch-2dpoint_selector id="ThirdPoint" accept_expressions="0" title="Third point" tooltip="Third point"
69 enable_value="enable_by_preferences"/>
72 <point2ddistance id="CircleRadius" accept_expressions="0" first_point="CircleCenter" label="Radius:" min="0" step="1.0"
73 default="0" icon="icons/Sketch/radius.png" tooltip="Set radius"
74 enable_value="enable_by_preferences">
75 <validator id="GeomValidators_Positive"/>
77 <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
85 icon="icons/Sketch/arc.png">
86 <toolbox id="ArcType">
87 <box id="CenterStartEnd" title="Center and two points" icon="icons/Sketch/arc_base_32x32.png">
88 <sketch-2dpoint_selector id="ArcCenter" accept_expressions="0" title="Center" tooltip="Center of a circle"
89 enable_value="enable_by_preferences"/>
90 <sketch-2dpoint_selector id="ArcStartPoint" accept_expressions="0" title="Start point" tooltip="Start point"
91 enable_value="enable_by_preferences"/>
92 <sketch-2dpoint_selector id="ArcEndPoint" accept_expressions="0" title="End point" tooltip="End point"
93 enable_value="enable_by_preferences"/>
94 <validator id="GeomValidators_Different" parameters="ArcCenter,ArcStartPoint,ArcEndPoint"/>
96 <box id="ThreePoints" title="Three points on arc" icon="icons/Sketch/arc_3pt_32x32.png">
97 <sketch-2dpoint_selector id="ArcStartPoint" accept_expressions="0" title="Start point" tooltip="Start point"
98 enable_value="enable_by_preferences"/>
99 <sketch-2dpoint_selector id="ArcEndPoint" accept_expressions="0" title="End point" tooltip="End point"
100 enable_value="enable_by_preferences"/>
101 <sketch-2dpoint_selector id="ArcPassedPoint" accept_expressions="0" title="Passed point" tooltip="Passed point"
102 enable_value="enable_by_preferences"/>
103 <validator id="GeomValidators_Different" parameters="ArcStartPoint,ArcEndPoint,ArcPassedPoint"/>
105 <box id="Tangent" title="Tangent with edge" icon="icons/Sketch/arc_tang_32x32.png">
106 <sketch_shape_selector id="ArcTangentPoint" label="Tangent point" tooltip="Select point on line" shape_types="vertex">
107 <validator id="SketchPlugin_ArcTangentPoint" parameters="" />
108 </sketch_shape_selector>
109 <sketch-2dpoint_selector id="ArcEndPoint" accept_expressions="0" title="End point" tooltip="End point"
110 enable_value="enable_by_preferences"/>
113 <labelvalue id="ArcRadius" accept_expressions="0" label="Radius:" default="computed" icon="icons/Sketch/radius.png"
114 tooltip="Set radius" obligatory="0" enable_value="enable_by_preferences">
115 <validator id="GeomValidators_Positive"/>
117 <labelvalue id="ArcAngle" label="Angle:" icon="icons/Sketch/angle.png" tooltip="Set angle" default="90" use_reset="false" obligatory="0"
118 enable_value="enable_by_preferences"/>
119 <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
122 <!-- SketchConstraintFillet -->
123 <feature id="SketchConstraintFillet" title="Fillet" tooltip="Create constraint defining fillet between two objects" icon="icons/Sketch/fillet.png">
124 <!--<sketch_shape_selector id="ConstraintEntityA"
125 label="Point" tooltip="Select point for fillet (should be shared by two entities only)" shape_types="vertex">
126 <validator id="SketchPlugin_FilletVertexValidator"/>
127 </sketch_shape_selector>-->
128 <sketch_multi_selector id="ConstraintEntityA"
130 tooltip="Select points for fillets"
131 type_choice="Vertices"
133 clear_in_neutral_point="false">
134 <validator id="SketchPlugin_FilletVertexValidator"/>
135 </sketch_multi_selector>
136 <labelvalue label="Radius" tooltip="Fillet arc radius" id="ConstraintValue" accept_expressions="0" min="0" use_reset="false"
137 enable_value="enable_by_preferences">
138 <validator id="GeomValidators_Positive"/>
140 <validator id="PartSet_FilletSelection"/>
142 <!-- SketchConstraintSplit -->
143 <feature id="SketchConstraintSplit" title="Split"
144 tooltip="Cut selected segment arc or circle on existing coincident points"
145 icon="icons/Sketch/split.png">
146 <sketch_sub_shape_selector
148 label="Split feature"
149 tooltip="Select feature for split"
152 use_graphic_intersection="false">
153 <validator id="SketchPlugin_SplitValidator"/>
154 </sketch_sub_shape_selector>
155 <validator id="PartSet_SplitSelection"/>
158 <feature id="SketchTrim" title="Trim"
159 tooltip="Trim selected segment arc or circle on intersection points nearest to the graphic selection"
160 icon="icons/Sketch/trim.png">
161 <sketch_feature_point_selector
163 label="Split feature"
164 tooltip="Select feature for split"
167 use_graphic_intersection="true">
168 <!--<validator id="SketchPlugin_SplitValidator" parameters="use_graphic_intersection"/> -->
169 </sketch_feature_point_selector>
170 <validator id="PartSet_SplitSelection"/>
174 <group id="Projection">
175 <!-- Intersection Point -->
177 id="SketchIntersectionPoint"
178 title="Intersection Point"
179 tooltip="Create intersection point"
180 icon="icons/Sketch/intersection_point.png">
181 <sketch_shape_selector
184 tooltip="Select external line."
187 use_sketch_plane="false">
188 <validator id="GeomValidators_ShapeType" parameters="line"/>
189 <validator id="SketchPlugin_IntersectionValidator"/>
190 </sketch_shape_selector>
193 <!-- Projected feature -->
195 id="SketchProjection"
197 tooltip="Project feature onto sketch plane"
198 icon="icons/Sketch/projection.png">
199 <sketch_shape_selector
202 tooltip="Select external edge."
205 can_create_external="false"
206 use_sketch_plane="false">
207 <validator id="SketchPlugin_ProjectionValidator"/>
208 </sketch_shape_selector>
209 <validator id="PartSet_ProjectionSelection"/>
213 <group id="Replication">
214 <!-- SketchConstraintMirror -->
216 id="SketchConstraintMirror"
217 title="Mirror" icon="icons/Sketch/mirror.png"
218 tooltip="Create constraint, mirroring group of objects">
219 <sketch_shape_selector id="ConstraintEntityA"
220 label="Mirror line" tooltip="Select mirror line" shape_types="edge">
221 <validator id="GeomValidators_ShapeType" parameters="line"/>
222 </sketch_shape_selector>
223 <sketch_multi_selector id="ConstraintMirrorList"
225 tooltip="Select list of objects to be mirrored"
229 <validator id="SketchPlugin_MirrorAttr" />
230 </sketch_multi_selector>
231 <validator id="PartSet_MultyTranslationSelection" />
234 <!-- SketchMultiTranslation -->
236 id="SketchMultiTranslation"
237 title="Translation" icon="icons/Sketch/translate.png"
238 tooltip="Multiple translation">
239 <sketch_multi_selector id="MultiTranslationList"
241 tooltip="Select list of objects to be translated"
245 <validator id="SketchPlugin_CopyValidator" />
246 </sketch_multi_selector>
247 <toolbox id="ValueType">
248 <box id="SingleValue" title="Single value" icon="icons/Sketch/translate_32x32.png">
249 <groupbox title="Direction">
250 <sketch_shape_selector
251 id="MultiTranslationStartPoint"
253 tooltip="Start point of translation"
254 shape_types="vertex">
255 <validator id="PartSet_DifferentObjects"/>
256 <validator id="GeomValidators_ShapeType" parameters="vertex"/>
257 </sketch_shape_selector>
258 <sketch_shape_selector
259 id="MultiTranslationEndPoint"
261 tooltip="Final point of translation"
262 shape_types="vertex">
263 <validator id="PartSet_DifferentObjects"/>
264 <validator id="GeomValidators_ShapeType" parameters="vertex"/>
265 </sketch_shape_selector>
268 <box id="FullValue" title="Full value" icon="icons/Sketch/translate_full_32x32.png">
269 <groupbox title="Direction">
270 <sketch_shape_selector
271 id="MultiTranslationStartPoint"
273 tooltip="Start point of translation"
274 shape_types="vertex">
275 <validator id="PartSet_DifferentObjects"/>
276 <validator id="GeomValidators_ShapeType" parameters="vertex"/>
277 </sketch_shape_selector>
278 <sketch_shape_selector
279 id="MultiTranslationEndPoint"
281 tooltip="Final point of translation"
282 shape_types="vertex">
283 <validator id="PartSet_DifferentObjects"/>
284 <validator id="GeomValidators_ShapeType" parameters="vertex"/>
285 </sketch_shape_selector>
289 <integervalue id="MultiTranslationObjects"
290 label="Total number of objects"
291 tooltip="Total number of objects"
292 default="2" min="2" use_reset="false">
293 <validator id="GeomValidators_Positive"/>
295 <validator id="PartSet_MultyTranslationSelection" />
298 <!-- SketchMultiRotation -->
300 id="SketchMultiRotation"
301 title="Rotation" icon="icons/Sketch/rotate.png"
302 tooltip="Multiple rotation">
303 <sketch_multi_selector id="MultiRotationList"
305 tooltip="Select list of objects to be rotated"
309 <validator id="SketchPlugin_CopyValidator" />
310 </sketch_multi_selector>
311 <sketch_shape_selector
312 id="MultiRotationCenter"
313 label="Center of rotation"
314 tooltip="Center of rotation"
315 shape_types="vertex">
316 <validator id="GeomValidators_ShapeType" parameters="vertex"/>
317 </sketch_shape_selector>
318 <toolbox id="AngleType">
319 <box id="SingleAngle" title="Single angle" icon="icons/Sketch/angle_up_32x32.png">
320 <doublevalue id="MultiRotationAngle"
322 icon="icons/Sketch/angle.png"
323 tooltip="Rotation angle"
324 default="90" use_reset="false"/>
326 <box id="FullAngle" title="Full angle" icon="icons/Sketch/angle_up_full_32x32.png">
327 <doublevalue id="MultiRotationAngle"
329 icon="icons/Sketch/angle.png"
330 tooltip="Rotation angle"
331 default="90" use_reset="false"/>
334 <integervalue id="MultiRotationObjects"
335 label="Total number of objects"
336 tooltip="Total number of objects"
337 default="2" min="2" use_reset="false">
338 <validator id="GeomValidators_Positive"/>
340 <validator id="PartSet_MultyTranslationSelection" />
344 <group id="Dimensional constraints">
345 <!-- SketchConstraintDistance -->
347 id="SketchConstraintDistance"
349 tooltip="Set fixed distance from a point to an object"
350 icon="icons/Sketch/distance.png">
351 <label title="Select objects for distance definition. Following objects can be accepted: point, line or arc end point, center of circle or arc."/>
352 <sketch_shape_selector
353 id="ConstraintEntityA"
355 tooltip="Select point, line end point, line, center of circle or arc."
356 shape_types="edge vertex">
357 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
358 <validator id="PartSet_DifferentObjects"/>
359 <validator id="GeomValidators_ShapeType" parameters="vertex,line"/>
360 </sketch_shape_selector>
361 <sketch_shape_selector
362 id="ConstraintEntityB"
363 label="Second object"
364 tooltip="Select point, line end point, line, center of circle or arc."
365 shape_types="edge vertex">
366 <validator id="PartSet_DifferentObjects"/>
367 <validator id="SketchPlugin_DistanceAttr" parameters="ConstraintEntityA"/>
368 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
369 <validator id="GeomValidators_ShapeType" parameters="vertex,line"/>
370 </sketch_shape_selector>
371 <sketch-2dpoint_flyout_selector id="ConstraintFlyoutValuePnt" default="computed" internal="1" obligatory="0"/>
373 <doublevalue_editor label="Value" tooltip="Distance" id="ConstraintValue" default="computed" min="0">
374 <validator id="GeomValidators_Positive"/>
375 </doublevalue_editor>
377 <validator id="PartSet_DistanceSelection"/>
380 <!-- SketchConstraintLength -->
381 <feature id="SketchConstraintLength" title="Length" tooltip="Set fixed length of a line segment" icon="icons/Sketch/length.png">
382 <label title="Select a line on which to calculate length" tooltip="Select a line on which to calculate length"/>
383 <shape_selector id="ConstraintEntityA" label="Line" tooltip="Select a line" shape_types="edge" >
384 <validator id="GeomValidators_ShapeType" parameters="line"/>
386 <sketch-2dpoint_flyout_selector id="ConstraintFlyoutValuePnt" default="computed" internal="1" obligatory="0"/>
387 <doublevalue_editor label="Value" tooltip="Length" id="ConstraintValue" default="computed">
388 <validator id="GeomValidators_Positive"/>
389 </doublevalue_editor>
390 <validator id="PartSet_LengthSelection"/>
393 <!-- SketchConstraintAngle -->
394 <feature id="SketchConstraintAngle" title="Angle" tooltip="Set fixed angle between two line segments" icon="icons/Sketch/angle_constr.png">
395 <sketch_shape_selector id="ConstraintEntityA" label="Line 1" tooltip="Select a line" shape_types="edge" >
396 <validator id="GeomValidators_ShapeType" parameters="line"/>
397 <validator id="PartSet_DifferentObjects"/>
398 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
399 </sketch_shape_selector>
400 <sketch_shape_selector id="ConstraintEntityB" label="Line 2" tooltip="Select a line" shape_types="edge" >
401 <validator id="GeomValidators_ShapeType" parameters="line"/>
402 <validator id="PartSet_DifferentObjects"/>
403 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
404 </sketch_shape_selector>
405 <sketch-2dpoint_flyout_selector id="ConstraintFlyoutValuePnt" default="computed" internal="1" obligatory="0"/>
406 <doublevalue_editor label="Value" tooltip="Angle" id="AngleValue" default="computed" min="0" max="360" />
407 <validator id="PartSet_AngleSelection"/>
408 <module_choice id="AngleType"
409 widget_type="radiobuttons"
410 buttons_dir="horizontal"
412 tooltip="Type of angle"
413 string_list="Direct Complementary Additional"
414 icons_list="icons/Sketch/angle_direct.png icons/Sketch/angle_complementary.png icons/Sketch/angle_backward.png"
419 <!-- SketchConstraintRadius -->
420 <feature id="SketchConstraintRadius" title="Radius" tooltip="Set fixed radius of a circle or an arc" icon="icons/Sketch/radius_constr.png">
421 <label title="Select a circle or an arc on which to calculate radius" tooltip="Select a circle or an arc on which to calculate radius"/>
422 <shape_selector id="ConstraintEntityA" label="Circle or Arc" tooltip="Select a circle or an arc"
424 <validator id="GeomValidators_ShapeType" parameters="circle"/>
426 <sketch-2dpoint_flyout_selector id="ConstraintFlyoutValuePnt" default="computed" internal="1" obligatory="0"/>
427 <doublevalue_editor label="Value" tooltip="Radius" id="ConstraintValue" default="computed">
428 <validator id="GeomValidators_Positive"/>
429 </doublevalue_editor>
430 <validator id="PartSet_RadiusSelection"/>
435 <group id="Geometrical constraints">
437 <!-- SketchConstraintHorizontal -->
438 <feature id="SketchConstraintHorizontal" title="Horizontal" tooltip="Create constraint defining horizontal line" icon="icons/Sketch/horisontal.png">
439 <sketch_shape_selector id="ConstraintEntityA"
440 label="Line" tooltip="Select a line" shape_types="edge" use_external="false">
441 <validator id="GeomValidators_ShapeType" parameters="line"/>
442 </sketch_shape_selector>
443 <validator id="PartSet_HVDirSelection"/>
446 <!-- SketchConstraintVertical -->
447 <feature id="SketchConstraintVertical" title="Vertical" tooltip="Create constraint defining vertical line" icon="icons/Sketch/vertical.png">
448 <sketch_shape_selector id="ConstraintEntityA"
449 label="Line" tooltip="Select a line" shape_types="edge" use_external="false">
450 <validator id="GeomValidators_ShapeType" parameters="line"/>
451 </sketch_shape_selector>
452 <validator id="PartSet_HVDirSelection"/>
455 <!-- SketchConstraintRigid -->
456 <feature id="SketchConstraintRigid" title="Fixed" tooltip="Fix an object" icon="icons/Sketch/fixed.png">
457 <sketch_shape_selector id="ConstraintEntityA" label="Object"
458 tooltip="Select point, line end point, line, center of circle or arc."
459 shape_types="edge vertex">
460 <validator id="GeomValidators_ShapeType" parameters="vertex,line,circle"/>
461 <validator id="SketchPlugin_NotFixed"/>
462 </sketch_shape_selector>
463 <validator id="PartSet_RigidSelection"/>
466 <!-- SketchConstraintParallel -->
467 <feature id="SketchConstraintParallel" title="Parallel" tooltip="Create constraint defining two parallel lines"
468 icon="icons/Sketch/parallel.png">
469 <sketch_shape_selector id="ConstraintEntityA"
470 label="First line" tooltip="Select a line" shape_types="edge">
471 <validator id="GeomValidators_ShapeType" parameters="line"/>
472 <validator id="PartSet_DifferentObjects"/>
473 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
474 </sketch_shape_selector>
476 <sketch_shape_selector id="ConstraintEntityB" label="Second line" tooltip="Select a line"
478 <validator id="GeomValidators_ShapeType" parameters="line"/>
479 <validator id="PartSet_DifferentObjects"/>
480 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
481 </sketch_shape_selector>
482 <validator id="PartSet_ParallelSelection"/>
485 <!-- SketchConstraintPerpendicular -->
486 <feature id="SketchConstraintPerpendicular" title="Perpendicular"
487 tooltip="Create constraint defining two perpendicular lines"
488 icon="icons/Sketch/perpendicular.png">
489 <sketch_shape_selector id="ConstraintEntityA"
490 label="First line" tooltip="Select a line"
492 <validator id="PartSet_DifferentObjects"/>
493 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
494 <validator id="GeomValidators_ShapeType" parameters="line"/>
495 </sketch_shape_selector>
497 <sketch_shape_selector id="ConstraintEntityB"
498 label="Second line" tooltip="Select a line"
500 <validator id="PartSet_DifferentObjects"/>
501 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
502 <validator id="GeomValidators_ShapeType" parameters="line"/>
503 </sketch_shape_selector>
504 <validator id="PartSet_PerpendicularSelection"/>
507 <!-- SketchConstraintTangent -->
508 <feature id="SketchConstraintTangent" title="Tangent" tooltip="Create constraint defining tangency of two objects with common coincident point" icon="icons/Sketch/tangent.png">
509 <sketch_shape_selector id="ConstraintEntityA"
510 label="First object" tooltip="Select line or arc" shape_types="edge">
511 <validator id="SketchPlugin_TangentAttr" parameters="ConstraintEntityB"/>
512 <validator id="PartSet_DifferentObjects"/>
513 </sketch_shape_selector>
515 <sketch_shape_selector id="ConstraintEntityB"
516 label="Second object" tooltip="Select line or arc" shape_types="edge">
517 <validator id="SketchPlugin_TangentAttr" parameters="ConstraintEntityA"/>
518 <validator id="PartSet_DifferentObjects"/>
519 </sketch_shape_selector>
520 <validator id="PartSet_TangentSelection"/>
523 <!-- SketchConstraintCoincidence -->
524 <feature id="SketchConstraintCoincidence" title="Coincident" tooltip="Create constraint for the coincidence of two points or point on line or circle" icon="icons/Sketch/coincedence.png">
525 <sketch_shape_selector id="ConstraintEntityA" label="First object" tooltip="Select a first object" shape_types="vertex edge">
526 <validator id="PartSet_DifferentObjects"/>
527 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
528 </sketch_shape_selector>
529 <sketch_shape_selector id="ConstraintEntityB" label="Second object" tooltip="Select a second object" shape_types="vertex edge">
530 <validator id="PartSet_DifferentObjects"/>
531 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
532 <validator id="SketchPlugin_CoincidenceAttr" parameters="ConstraintEntityA"/>
533 </sketch_shape_selector>
534 <validator id="PartSet_CoincidentSelection"/>
537 <!-- SketchConstraintMiddle -->
538 <feature id="SketchConstraintMiddle" title="Middle point" tooltip="Create constraint for setting middle point on a line" icon="icons/Sketch/middlepoint.png">
539 <sketch_shape_selector id="ConstraintEntityA" label="First object" tooltip="Select a first object" shape_types="vertex edge">
540 <validator id="PartSet_DifferentObjects"/>
541 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
542 <validator id="SketchPlugin_MiddlePointAttr" parameters="ConstraintEntityB"/>
543 </sketch_shape_selector>
544 <sketch_shape_selector id="ConstraintEntityB" label="Second object" tooltip="Select a second object" shape_types="vertex edge">
545 <validator id="PartSet_DifferentObjects"/>
546 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
547 <validator id="SketchPlugin_MiddlePointAttr" parameters="ConstraintEntityA"/>
548 </sketch_shape_selector>
549 <validator id="PartSet_MiddlePointSelection"/>
552 <!-- SketchConstraintEqual -->
553 <feature id="SketchConstraintEqual" title="Equal"
554 tooltip="Create constraint defining equal lengths of two lines or line and arc or equal radii of two arcs or two circles or arc and circle"
555 icon="icons/Sketch/equal.png">
556 <sketch_shape_selector id="ConstraintEntityA"
557 label="First object" tooltip="Select line, circle or arc" shape_types="edge">
558 <validator id="PartSet_DifferentObjects"/>
559 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
560 </sketch_shape_selector>
562 <sketch_shape_selector id="ConstraintEntityB"
563 label="Second object" tooltip="Select line, circle or arc" shape_types="edge">
564 <validator id="SketchPlugin_EqualAttr" parameters="ConstraintEntityA"/>
565 <validator id="PartSet_DifferentObjects"/>
566 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
567 </sketch_shape_selector>
568 <validator id="PartSet_EqualSelection"/>
571 <!-- SketchConstraintCollinear -->
572 <feature id="SketchConstraintCollinear" title="Collinear" tooltip="Create constraint defining collinearity of two lines" icon="icons/Sketch/collinear.png">
573 <sketch_shape_selector id="ConstraintEntityA"
574 label="First line" tooltip="Select a line" shape_types="edge">
575 <validator id="GeomValidators_ShapeType" parameters="line"/>
576 <validator id="PartSet_DifferentObjects"/>
577 </sketch_shape_selector>
579 <sketch_shape_selector id="ConstraintEntityB"
580 label="Second line" tooltip="Select a line" shape_types="edge">
581 <validator id="GeomValidators_ShapeType" parameters="line"/>
582 <validator id="PartSet_DifferentObjects"/>
583 </sketch_shape_selector>
584 <validator id="PartSet_CollinearSelection"/>