1 <!-- Copyright (C) 2014-20xx CEA/DEN, EDF R&D -->
4 <workbench id="Sketch">
8 nested="SketchPoint SketchIntersectionPoint SketchLine SketchCircle SketchArc SketchRectangle SketchConstraintLength SketchConstraintRadius SketchConstraintDistance SketchConstraintParallel SketchConstraintPerpendicular SketchConstraintRigid SketchConstraintHorizontal SketchConstraintVertical SketchConstraintEqual SketchConstraintTangent SketchConstraintFillet SketchConstraintCoincidence SketchConstraintMirror SketchConstraintAngle SketchMultiRotation SketchMultiTranslation SketchConstraintCollinear SketchConstraintMiddle"
9 when_nested="accept abort"
11 tooltip="Create sketch"
12 icon="icons/Sketch/sketch.png">
13 <sketch-start-label id="External" title="Select a plane on which to create a sketch" tooltip="Select a plane on which to create a sketch">
14 <validator id="GeomValidators_Face" parameters="plane"/>
16 <label id="SolverDOF"/>
17 <label id="SolverError" styleSheet="color : red; font : bold"/>
18 <validator id="SketchPlugin_SolverErrorValidator"/>
22 <feature id="SketchPoint" title="Point" tooltip="Create point" icon="icons/Sketch/point.png">
23 <sketch-2dpoint_selector id="PointCoordindates" accept_expressions="0" title="Point" tooltip="Point coordinates"/>
24 <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
28 <feature id="SketchLine" title="Line" tooltip="Create line" icon="icons/Sketch/line.png">
29 <sketch-2dpoint_selector id="StartPoint" accept_expressions="0" title="Start point" tooltip="Start point coordinates" previous_feature_param="EndPoint"/>
30 <sketch-2dpoint_selector id="EndPoint" accept_expressions="0" title="End point" tooltip="End point coordinates"/>
31 <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
32 <validator id="GeomValidators_Different" parameters="StartPoint,EndPoint"/>
39 tooltip="Create circle"
40 icon="icons/Sketch/circle.png">
41 <toolbox id="CircleType">
42 <box id="CenterRadius" title="Center and radius" icon="icons/Sketch/circle_pt_rad_32x32.png">
43 <sketch-2dpoint_selector id="CircleCenter" accept_expressions="0" title="Center" tooltip="Center coordinates"/>
44 <point2ddistance id="CircleRadius" accept_expressions="0" first_point="CircleCenter" label="Radius:" min="0" step="1.0" default="0" icon="icons/Sketch/radius.png" tooltip="Set radius">
45 <validator id="GeomValidators_Positive"/>
48 <box id="ThreePoints" title="Three points" icon="icons/Sketch/circle_3pt_32x32.png">
49 <sketch-2dpoint_selector id="FirstPoint" accept_expressions="0" title="First point" tooltip="First point"/>
50 <sketch-2dpoint_selector id="SecondPoint" accept_expressions="0" title="Second point" tooltip="Second point"/>
51 <sketch-2dpoint_selector id="ThirdPoint" accept_expressions="0" title="Third point" tooltip="Third point"/>
54 <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
62 icon="icons/Sketch/arc.png">
63 <toolbox id="ArcType">
64 <box id="CenterStartEnd" title="Center and two points" icon="icons/Sketch/arc_base_32x32.png">
65 <sketch-2dpoint_selector id="ArcCenter" accept_expressions="0" title="Center" tooltip="Center of a circle"/>
66 <sketch-2dpoint_selector id="ArcStartPoint" accept_expressions="0" title="Start point" tooltip="Start point"/>
67 <sketch-2dpoint_selector id="ArcEndPoint" accept_expressions="0" title="End point" tooltip="End point"/>
68 <validator id="GeomValidators_Different" parameters="ArcCenter,ArcStartPoint,ArcEndPoint"/>
70 <box id="ThreePoints" title="Three points on arc" icon="icons/Sketch/arc_3pt_32x32.png">
71 <sketch-2dpoint_selector id="ArcStartPoint" accept_expressions="0" title="Start point" tooltip="Start point"/>
72 <sketch-2dpoint_selector id="ArcEndPoint" accept_expressions="0" title="End point" tooltip="End point"/>
73 <sketch-2dpoint_selector id="ArcPassedPoint" accept_expressions="0" title="Passed point" tooltip="Passed point"/>
74 <validator id="GeomValidators_Different" parameters="ArcStartPoint,ArcEndPoint,ArcPassedPoint"/>
76 <box id="Tangent" title="Tangent with edge" icon="icons/Sketch/arc_tang_32x32.png">
77 <sketch_shape_selector id="ArcTangentPoint" label="Start point" tooltip="Select point on line" shape_types="vertex">
78 <validator id="SketchPlugin_ArcTangentPoint" parameters="" />
79 </sketch_shape_selector>
80 <sketch-2dpoint_selector id="ArcEndPoint" accept_expressions="0" title="End point" tooltip="End point"/>
83 <doublevalue id="ArcRadius" accept_expressions="0" label="Radius:" default="computed" icon="icons/Sketch/radius.png" tooltip="Set radius" obligatory="0">
84 <validator id="GeomValidators_Positive"/>
86 <doublevalue id="ArcAngle" label="Angle:" icon="icons/Sketch/angle.png" tooltip="Set angle" default="90" use_reset="false" obligatory="0"/>
87 <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
90 <!-- SketchConstraintFillet -->
91 <feature id="SketchConstraintFillet" title="Fillet" tooltip="Create constraint defining fillet between two objects" icon="icons/Sketch/fillet.png">
92 <!--<sketch_shape_selector id="ConstraintEntityA"
93 label="Point" tooltip="Select point for fillet (should be shared by two entities only)" shape_types="vertex">
94 <validator id="SketchPlugin_FilletVertexValidator"/>
95 </sketch_shape_selector>-->
96 <sketch_multi_selector id="ConstraintEntityA"
98 tooltip="Select points for fillets"
99 type_choice="Vertices"
101 <validator id="SketchPlugin_FilletVertexValidator"/>
102 </sketch_multi_selector>
103 <doublevalue label="Radius" tooltip="Fillet arc radius" id="ConstraintValue" accept_expressions="0" min="0" use_reset="false">
104 <validator id="GeomValidators_Positive"/>
106 <validator id="PartSet_FilletSelection"/>
110 <!--<group id="Projection"> -->
111 <!-- Intersection Point -->
113 id="SketchIntersectionPoint"
114 title="Intersection Point"
115 tooltip="Create intersection point"
116 icon="icons/Sketch/intersection_point.png">
117 <sketch_shape_selector
120 tooltip="Select external line."
123 use_sketch_plane="false">
124 <validator id="GeomValidators_ShapeType" parameters="line"/>
125 <validator id="SketchPlugin_IntersectionValidator"/>
126 </sketch_shape_selector>
127 <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
131 <group id="Replication">
132 <!-- SketchConstraintMirror -->
134 id="SketchConstraintMirror"
135 title="Mirror" icon="icons/Sketch/mirror.png"
136 tooltip="Create constraint, mirroring group of objects">
137 <sketch_shape_selector id="ConstraintEntityA"
138 label="Mirror line" tooltip="Select mirror line" shape_types="edge">
139 <validator id="GeomValidators_ShapeType" parameters="line"/>
140 </sketch_shape_selector>
141 <sketch_multi_selector id="ConstraintMirrorList"
143 tooltip="Select list of mirroring objects"
147 <validator id="SketchPlugin_MirrorAttr" />
148 </sketch_multi_selector>
151 <!-- SketchMultiTranslation -->
153 id="SketchMultiTranslation"
154 title="Translation" icon="icons/Sketch/translate.png"
155 tooltip="Multiple translation">
156 <sketch_multi_selector id="MultiTranslationList"
158 tooltip="Select list of translating objects"
162 <validator id="SketchPlugin_CopyValidator" />
163 </sketch_multi_selector>
164 <toolbox id="ValueType">
165 <box id="SingleValue" title="Single value" icon="icons/Sketch/translate_32x32.png">
166 <groupbox title="Direction">
167 <sketch_shape_selector
168 id="MultiTranslationStartPoint"
170 tooltip="Start point of translation"
171 shape_types="vertex">
172 <validator id="PartSet_DifferentObjects"/>
173 <validator id="GeomValidators_ShapeType" parameters="vertex"/>
174 </sketch_shape_selector>
175 <sketch_shape_selector
176 id="MultiTranslationEndPoint"
178 tooltip="Final point of translation"
179 shape_types="vertex">
180 <validator id="PartSet_DifferentObjects"/>
181 <validator id="GeomValidators_ShapeType" parameters="vertex"/>
182 </sketch_shape_selector>
185 <box id="FullValue" title="Full value" icon="icons/Sketch/translate_full_32x32.png">
186 <groupbox title="Direction">
187 <sketch_shape_selector
188 id="MultiTranslationStartPoint"
190 tooltip="Start point of translation"
191 shape_types="vertex">
192 <validator id="PartSet_DifferentObjects"/>
193 <validator id="GeomValidators_ShapeType" parameters="vertex"/>
194 </sketch_shape_selector>
195 <sketch_shape_selector
196 id="MultiTranslationEndPoint"
198 tooltip="Final point of translation"
199 shape_types="vertex">
200 <validator id="PartSet_DifferentObjects"/>
201 <validator id="GeomValidators_ShapeType" parameters="vertex"/>
202 </sketch_shape_selector>
206 <integervalue id="MultiTranslationObjects"
207 label="Total number of objects"
208 tooltip="Total number of objects"
209 default="2" min="2" use_reset="false">
210 <validator id="GeomValidators_Positive"/>
214 <!-- SketchMultiRotation -->
216 id="SketchMultiRotation"
217 title="Rotation" icon="icons/Sketch/rotate.png"
218 tooltip="Multiple rotation">
219 <sketch_multi_selector id="MultiRotationList"
221 tooltip="Select list of rotating objects"
225 <validator id="SketchPlugin_CopyValidator" />
226 </sketch_multi_selector>
227 <sketch_shape_selector
228 id="MultiRotationCenter"
229 label="Center of rotation"
230 tooltip="Center of rotation"
231 shape_types="vertex">
232 <validator id="GeomValidators_ShapeType" parameters="vertex"/>
233 </sketch_shape_selector>
234 <toolbox id="AngleType">
235 <box id="SingleAngle" title="Single angle" icon="icons/Sketch/angle_up_32x32.png">
236 <doublevalue id="MultiRotationAngle"
238 icon="icons/Sketch/angle.png"
239 tooltip="Rotation angle"
240 default="90" use_reset="false"/>
242 <box id="FullAngle" title="Full angle" icon="icons/Sketch/angle_up_full_32x32.png">
243 <doublevalue id="MultiRotationAngle"
245 icon="icons/Sketch/angle.png"
246 tooltip="Rotation angle"
247 default="90" use_reset="false"/>
250 <integervalue id="MultiRotationObjects"
251 label="Total number of objects"
252 tooltip="Total number of objects"
253 default="2" min="2" use_reset="false">
254 <validator id="GeomValidators_Positive"/>
259 <group id="Dimensional constraints">
260 <!-- SketchConstraintDistance -->
262 id="SketchConstraintDistance"
264 tooltip="Set fixed distance from a point to an object"
265 icon="icons/Sketch/distance.png">
266 <label title="Select objects for distance definition. Following objects can be accepted: point, line or arc end point, center of circle or arc."/>
267 <sketch_shape_selector
268 id="ConstraintEntityA"
270 tooltip="Select point, line end point, line, center of circle or arc."
271 shape_types="edge vertex">
272 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
273 <validator id="PartSet_DifferentObjects"/>
274 <validator id="GeomValidators_ShapeType" parameters="vertex,line"/>
275 </sketch_shape_selector>
276 <sketch_shape_selector
277 id="ConstraintEntityB"
278 label="Second object"
279 tooltip="Select point, line end point, line, center of circle or arc."
280 shape_types="edge vertex">
281 <validator id="PartSet_DifferentObjects"/>
282 <validator id="SketchPlugin_DistanceAttr" parameters="ConstraintEntityA"/>
283 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
284 <validator id="GeomValidators_ShapeType" parameters="vertex,line"/>
285 </sketch_shape_selector>
286 <sketch-2dpoint_flyout_selector id="ConstraintFlyoutValuePnt" default="computed" internal="1" obligatory="0"/>
288 <doublevalue_editor label="Value" tooltip="Distance" id="ConstraintValue" default="computed" min="0">
289 <validator id="GeomValidators_Positive"/>
290 </doublevalue_editor>
292 <validator id="PartSet_DistanceSelection"/>
295 <!-- SketchConstraintLength -->
296 <feature id="SketchConstraintLength" title="Length" tooltip="Set fixed length of a line segment" icon="icons/Sketch/length.png">
297 <label title="Select a line on which to calculate length" tooltip="Select a line on which to calculate length"/>
298 <shape_selector id="ConstraintEntityA" label="Line" tooltip="Select an line" shape_types="edge" >
299 <validator id="GeomValidators_ShapeType" parameters="line"/>
301 <sketch-2dpoint_flyout_selector id="ConstraintFlyoutValuePnt" default="computed" internal="1" obligatory="0"/>
302 <doublevalue_editor label="Value" tooltip="Length" id="ConstraintValue" default="computed">
303 <validator id="GeomValidators_Positive"/>
304 </doublevalue_editor>
305 <validator id="PartSet_LengthSelection"/>
308 <!-- SketchConstraintAngle -->
309 <feature id="SketchConstraintAngle" title="Angle" tooltip="Set fixed angle between two line segments" icon="icons/Sketch/angle_constr.png">
310 <sketch_shape_selector id="ConstraintEntityA" label="Line 1" tooltip="Select an line" shape_types="edge" >
311 <validator id="GeomValidators_ShapeType" parameters="line"/>
312 <validator id="PartSet_DifferentObjects"/>
313 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
314 </sketch_shape_selector>
315 <sketch_shape_selector id="ConstraintEntityB" label="Line 2" tooltip="Select an line" shape_types="edge" >
316 <validator id="GeomValidators_ShapeType" parameters="line"/>
317 <validator id="PartSet_DifferentObjects"/>
318 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
319 </sketch_shape_selector>
320 <sketch-2dpoint_flyout_selector id="ConstraintFlyoutValuePnt" default="computed" internal="1" obligatory="0"/>
321 <doublevalue_editor label="Value" tooltip="Angle" id="AngleValue" default="computed" min="0" max="360" />
322 <validator id="PartSet_AngleSelection"/>
323 <module_choice id="AngleType"
324 widget_type="radiobuttons"
325 buttons_dir="horizontal"
327 tooltip="Type of angle"
328 string_list="Direct Complementary Additional"
329 icons_list="icons/Sketch/angle_direct.png icons/Sketch/angle_complementary.png icons/Sketch/angle_backward.png"
334 <!-- SketchConstraintRadius -->
335 <feature id="SketchConstraintRadius" title="Radius" tooltip="Set fixed radius of a circle or an arc" icon="icons/Sketch/radius_constr.png">
336 <label title="Select a circle or an arc on which to calculate radius" tooltip="Select a circle or an arc on which to calculate radius"/>
337 <shape_selector id="ConstraintEntityA" label="Circle or Arc" tooltip="Select a circle or an arc"
339 <validator id="GeomValidators_ShapeType" parameters="circle"/>
341 <sketch-2dpoint_flyout_selector id="ConstraintFlyoutValuePnt" default="computed" internal="1" obligatory="0"/>
342 <doublevalue_editor label="Value" tooltip="Radius" id="ConstraintValue" default="computed">
343 <validator id="GeomValidators_Positive"/>
344 </doublevalue_editor>
345 <validator id="PartSet_RadiusSelection"/>
350 <group id="Geometrical constraints">
352 <!-- SketchConstraintHorizontal -->
353 <feature id="SketchConstraintHorizontal" title="Horizontal" tooltip="Create constraint defining horizontal line" icon="icons/Sketch/horisontal.png">
354 <sketch_shape_selector id="ConstraintEntityA"
355 label="Line" tooltip="Select a line" shape_types="edge" use_external="false">
356 <validator id="GeomValidators_ShapeType" parameters="line"/>
357 </sketch_shape_selector>
358 <validator id="PartSet_HVDirSelection"/>
361 <!-- SketchConstraintVertical -->
362 <feature id="SketchConstraintVertical" title="Vertical" tooltip="Create constraint defining vertical line" icon="icons/Sketch/vertical.png">
363 <sketch_shape_selector id="ConstraintEntityA"
364 label="Line" tooltip="Select a line" shape_types="edge" use_external="false">
365 <validator id="GeomValidators_ShapeType" parameters="line"/>
366 </sketch_shape_selector>
367 <validator id="PartSet_HVDirSelection"/>
370 <!-- SketchConstraintRigid -->
371 <feature id="SketchConstraintRigid" title="Fixed" tooltip="Fix an object" icon="icons/Sketch/fixed.png">
372 <sketch_shape_selector id="ConstraintEntityA" label="Object"
373 tooltip="Select point, line end point, line, center of circle or arc."
374 shape_types="edge vertex">
375 <validator id="GeomValidators_ShapeType" parameters="vertex,line,circle"/>
376 <validator id="SketchPlugin_NotFixed"/>
377 </sketch_shape_selector>
378 <validator id="PartSet_RigidSelection"/>
381 <!-- SketchConstraintParallel -->
382 <feature id="SketchConstraintParallel" title="Parallel" tooltip="Create constraint defining two parallel lines"
383 icon="icons/Sketch/parallel.png">
384 <sketch_shape_selector id="ConstraintEntityA"
385 label="First line" tooltip="Select a line" shape_types="edge">
386 <validator id="GeomValidators_ShapeType" parameters="line"/>
387 <validator id="PartSet_DifferentObjects"/>
388 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
389 </sketch_shape_selector>
391 <sketch_shape_selector id="ConstraintEntityB" label="Second line" tooltip="Select a line"
393 <validator id="GeomValidators_ShapeType" parameters="line"/>
394 <validator id="PartSet_DifferentObjects"/>
395 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
396 </sketch_shape_selector>
397 <validator id="PartSet_ParallelSelection"/>
400 <!-- SketchConstraintPerpendicular -->
401 <feature id="SketchConstraintPerpendicular" title="Perpendicular"
402 tooltip="Create constraint defining two perpendicular lines"
403 icon="icons/Sketch/perpendicular.png">
404 <sketch_shape_selector id="ConstraintEntityA"
405 label="First line" tooltip="Select an line"
407 <validator id="PartSet_DifferentObjects"/>
408 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
409 <validator id="GeomValidators_ShapeType" parameters="line"/>
410 </sketch_shape_selector>
412 <sketch_shape_selector id="ConstraintEntityB"
413 label="Second line" tooltip="Select an line"
415 <validator id="PartSet_DifferentObjects"/>
416 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
417 <validator id="GeomValidators_ShapeType" parameters="line"/>
418 </sketch_shape_selector>
419 <validator id="PartSet_PerpendicularSelection"/>
422 <!-- SketchConstraintTangent -->
423 <feature id="SketchConstraintTangent" title="Tangent" tooltip="Create constraint defining tangency of two objects with common coincident point" icon="icons/Sketch/tangent.png">
424 <sketch_shape_selector id="ConstraintEntityA"
425 label="First object" tooltip="Select line or arc" shape_types="edge">
426 <validator id="SketchPlugin_TangentAttr" parameters="ConstraintEntityB"/>
427 <validator id="PartSet_DifferentObjects"/>
428 </sketch_shape_selector>
430 <sketch_shape_selector id="ConstraintEntityB"
431 label="Second object" tooltip="Select line or arc" shape_types="edge">
432 <validator id="SketchPlugin_TangentAttr" parameters="ConstraintEntityA"/>
433 <validator id="PartSet_DifferentObjects"/>
434 </sketch_shape_selector>
435 <validator id="PartSet_TangentSelection"/>
438 <!-- SketchConstraintCoincidence -->
439 <feature id="SketchConstraintCoincidence" title="Coincident" tooltip="Create constraint for the coincidence of two points or point on line or circle" icon="icons/Sketch/coincedence.png">
440 <sketch_shape_selector id="ConstraintEntityA" label="First object" tooltip="Select a first object" shape_types="vertex edge">
441 <validator id="PartSet_DifferentObjects"/>
442 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
443 </sketch_shape_selector>
444 <sketch_shape_selector id="ConstraintEntityB" label="Second object" tooltip="Select a second object" shape_types="vertex edge">
445 <validator id="PartSet_DifferentObjects"/>
446 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
447 <validator id="SketchPlugin_CoincidenceAttr" parameters="ConstraintEntityA"/>
448 </sketch_shape_selector>
449 <validator id="PartSet_CoincidentSelection"/>
452 <!-- SketchConstraintMiddle -->
453 <feature id="SketchConstraintMiddle" title="Middle point" tooltip="Create constraint for setting middle point on a line" icon="icons/Sketch/middlepoint.png">
454 <sketch_shape_selector id="ConstraintEntityA" label="First object" tooltip="Select a first object" shape_types="vertex edge">
455 <validator id="PartSet_DifferentObjects"/>
456 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
457 <validator id="SketchPlugin_MiddlePointAttr" parameters="ConstraintEntityB"/>
458 </sketch_shape_selector>
459 <sketch_shape_selector id="ConstraintEntityB" label="Second object" tooltip="Select a second object" shape_types="vertex edge">
460 <validator id="PartSet_DifferentObjects"/>
461 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
462 <validator id="SketchPlugin_MiddlePointAttr" parameters="ConstraintEntityA"/>
463 </sketch_shape_selector>
464 <validator id="PartSet_MiddlePointSelection"/>
467 <!-- SketchConstraintEqual -->
468 <feature id="SketchConstraintEqual" title="Equal"
469 tooltip="Create constraint defining equal lengths of two lines or line and arc or equal radii of two arcs or two circles or arc and circle"
470 icon="icons/Sketch/equal.png">
471 <sketch_shape_selector id="ConstraintEntityA"
472 label="First object" tooltip="Select line, circle or arc" shape_types="edge">
473 <validator id="PartSet_DifferentObjects"/>
474 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
475 </sketch_shape_selector>
477 <sketch_shape_selector id="ConstraintEntityB"
478 label="Second object" tooltip="Select line, circle or arc" shape_types="edge">
479 <validator id="SketchPlugin_EqualAttr" parameters="ConstraintEntityA"/>
480 <validator id="PartSet_DifferentObjects"/>
481 <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
482 </sketch_shape_selector>
483 <validator id="PartSet_EqualSelection"/>
486 <!-- SketchConstraintCollinear -->
488 <feature id="SketchConstraintCollinear" title="Collinear" tooltip="Create constraint defining collinearity of two lines" icon="icons/Sketch/collinear.png">
489 <sketch_shape_selector id="ConstraintEntityA"
490 label="First line" tooltip="Select a line" shape_types="edge">
491 <validator id="GeomValidators_ShapeType" parameters="line"/>
492 <validator id="PartSet_DifferentObjects"/>
493 </sketch_shape_selector>
495 <sketch_shape_selector id="ConstraintEntityB"
496 label="Second line" tooltip="Select a line" shape_types="edge">
497 <validator id="GeomValidators_ShapeType" parameters="line"/>
498 <validator id="PartSet_DifferentObjects"/>
499 </sketch_shape_selector>
500 <validator id="PartSet_CollinearSelection"/>