src/SketchPlugin/Test/TestTrimArc08.py

   1 ## Copyright (C) 2018-20xx  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 from salome.shaper import model
  22 from salome.shaper import geom
  23
  24 model.begin()
  25 partSet = model.moduleDocument()
  26 Part_1 = model.addPart(partSet)
  27 Part_1_doc = Part_1.document()
  28 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  29 SketchLine_1 = Sketch_1.addLine(12, -8, -12, -8)
  30 SketchLine_2 = Sketch_1.addLine(-12, -8, -12, 20)
  31 SketchLine_3 = Sketch_1.addLine(-12, 20, 12, 20)
  32 SketchLine_4 = Sketch_1.addLine(12, 20, 12, -8)
  33 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  34 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  35 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  36 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  37 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  38 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  39 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  40 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  41 SketchArc_1 = Sketch_1.addArc(0, -3, 20, -3, -20, -3, False)
  42 SketchLine_5 = Sketch_1.addLine(20, -3, 20, -30)
  43 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_5.startPoint())
  44 SketchLine_6 = Sketch_1.addLine(20, 17, 50, 17)
  45 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchLine_5.result(), SketchArc_1.results()[1])
  46 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchLine_6.result(), SketchArc_1.results()[1])
  47 model.do()
  48
  49 model.testNbSubFeatures(Sketch_1, "SketchArc", 1)
  50 model.testNbSubFeatures(Sketch_1, "SketchLine", 6)
  51 model.testNbSubFeatures(Sketch_1, "SketchConstraintCoincidence", 5)
  52 model.testNbSubFeatures(Sketch_1, "SketchConstraintTangent", 2)
  53 model.testNbSubFeatures(Sketch_1, "SketchConstraintEqual", 0)
  54
  55 # perform trim
  56 SketchTrim = Sketch_1.addTrim(SketchArc_1, geom.Pnt2d(0, 17))
  57 SketchTrim.execute()
  58 model.do()
  59
  60 model.testNbSubFeatures(Sketch_1, "SketchArc", 2)
  61 model.testNbSubFeatures(Sketch_1, "SketchLine", 6)
  62 model.testNbSubFeatures(Sketch_1, "SketchConstraintCoincidence", 8)
  63 model.testNbSubFeatures(Sketch_1, "SketchConstraintTangent", 2)
  64 model.testNbSubFeatures(Sketch_1, "SketchConstraintEqual", 1)
  65
  66 model.end()
  67
  68 assert(model.checkPythonDump())