src/SketchPlugin/Test/TestTrimArc08.py

   1 # Copyright (C) 2018-2022  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21 from salome.shaper import geom
  22
  23 model.begin()
  24 partSet = model.moduleDocument()
  25 Part_1 = model.addPart(partSet)
  26 Part_1_doc = Part_1.document()
  27 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  28 SketchLine_1 = Sketch_1.addLine(12, -8, -12, -8)
  29 SketchLine_2 = Sketch_1.addLine(-12, -8, -12, 20)
  30 SketchLine_3 = Sketch_1.addLine(-12, 20, 12, 20)
  31 SketchLine_4 = Sketch_1.addLine(12, 20, 12, -8)
  32 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  33 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  34 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  35 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  36 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  37 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  38 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  39 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  40 SketchArc_1 = Sketch_1.addArc(0, -3, 20, -3, -20, -3, False)
  41 SketchLine_5 = Sketch_1.addLine(20, -3, 20, -30)
  42 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_5.startPoint())
  43 SketchLine_6 = Sketch_1.addLine(20, 17, 50, 17)
  44 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchLine_5.result(), SketchArc_1.results()[1])
  45 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchLine_6.result(), SketchArc_1.results()[1])
  46 model.do()
  47
  48 model.testNbSubFeatures(Sketch_1, "SketchArc", 1)
  49 model.testNbSubFeatures(Sketch_1, "SketchLine", 6)
  50 model.testNbSubFeatures(Sketch_1, "SketchConstraintCoincidence", 5)
  51 model.testNbSubFeatures(Sketch_1, "SketchConstraintTangent", 2)
  52 model.testNbSubFeatures(Sketch_1, "SketchConstraintEqual", 0)
  53
  54 # perform trim
  55 SketchTrim = Sketch_1.addTrim(SketchArc_1, geom.Pnt2d(0, 17))
  56 SketchTrim.execute()
  57 model.do()
  58
  59 model.testNbSubFeatures(Sketch_1, "SketchArc", 2)
  60 model.testNbSubFeatures(Sketch_1, "SketchLine", 6)
  61 model.testNbSubFeatures(Sketch_1, "SketchConstraintCoincidence", 8)
  62 model.testNbSubFeatures(Sketch_1, "SketchConstraintTangent", 2)
  63 model.testNbSubFeatures(Sketch_1, "SketchConstraintEqual", 1)
  64
  65 model.end()
  66
  67 assert(model.checkPythonDump())