src/SketchPlugin/Test/TestSketchCopy11.py

   1 # Copyright (C) 2020-2023  CEA, EDF
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from GeomAPI import *
  21 from SketchAPI import *
  22
  23 from salome.shaper import model
  24
  25 model.begin()
  26 partSet = model.moduleDocument()
  27 Part_1 = model.addPart(partSet)
  28 Part_1_doc = Part_1.document()
  29 Cylinder_1 = model.addCylinder(Part_1_doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
  30 Sketch_1 = model.addSketch(Part_1_doc, model.standardPlane("XOZ"))
  31 SketchIntersectionPoint_1 = Sketch_1.addIntersectionPoint(model.selection("EDGE", "[Cylinder_1_1/Face_1][Cylinder_1_1/Face_2]"), True)
  32 [SketchPoint_1, SketchPoint_2] = SketchIntersectionPoint_1.intersectionPoints()
  33 SketchCircle_1 = Sketch_1.addCircle(5, 10, 3)
  34 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchAPI_Point(SketchPoint_1).coordinates(), SketchCircle_1.center())
  35 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchCircle_1.results()[1], 3)
  36 SketchMultiTranslation_1 = Sketch_1.addTranslation([SketchCircle_1.results()[1]], SketchAPI_Point(SketchPoint_2).coordinates(), SketchAPI_Point(SketchPoint_1).coordinates(), 3)
  37 [SketchCircle_2, SketchCircle_3] = SketchMultiTranslation_1.translated()
  38 SketchMultiRotation_1 = Sketch_1.addRotation([SketchCircle_1.results()[1]], SketchAPI_Point(SketchPoint_2).coordinates(), 360, 5, True)
  39 [SketchCircle_4, SketchCircle_5, SketchCircle_6, SketchCircle_7] = SketchMultiRotation_1.rotated()
  40 SketchLine_1 = Sketch_1.addLine(2.699367028097859, 1.399671792347037, 12.16381438587305, 5.532036131657337)
  41 SketchLine_1.setAuxiliary(True)
  42 SketchConstraintRigid_1 = Sketch_1.setFixed(SketchLine_1.result())
  43 SketchConstraintMirror_1 = Sketch_1.addMirror(SketchLine_1.result(), [SketchCircle_1.results()[1]])
  44 [SketchCircle_8] = SketchConstraintMirror_1.mirrored()
  45 model.do()
  46 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), 10, 0)
  47
  48 Sketch_1_Copy = model.copySketch(Part_1_doc, Sketch_1)
  49 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", Sketch_1_Copy.name())], model.selection(), 0, 10)
  50
  51 model.end()
  52
  53 error = model.compareSketches(Sketch_1, Sketch_1_Copy)
  54 assert(error == ""), error
  55
  56 VOL = 282.743338823
  57
  58 model.testNbResults(Extrusion_1, 8)
  59 model.testNbSubResults(Extrusion_1, [0, 0, 0, 0, 0, 0, 0, 0])
  60 model.testNbSubShapes(Extrusion_1, GeomAPI_Shape.SOLID, [1, 1, 1, 1, 1, 1, 1, 1])
  61 model.testNbSubShapes(Extrusion_1, GeomAPI_Shape.FACE, [3, 3, 3, 3, 3, 3, 3, 3])
  62 model.testNbSubShapes(Extrusion_1, GeomAPI_Shape.EDGE, [6, 6, 6, 6, 6, 6, 6, 6])
  63 model.testNbSubShapes(Extrusion_1, GeomAPI_Shape.VERTEX, [12, 12, 12, 12, 12, 12, 12, 12])
  64 model.testResultsVolumes(Extrusion_1, [VOL, VOL, VOL, VOL, VOL, VOL, VOL, VOL])
  65
  66 model.testNbResults(Extrusion_2, 8)
  67 model.testNbSubResults(Extrusion_2, [0, 0, 0, 0, 0, 0, 0, 0])
  68 model.testNbSubShapes(Extrusion_2, GeomAPI_Shape.SOLID, [1, 1, 1, 1, 1, 1, 1, 1])
  69 model.testNbSubShapes(Extrusion_2, GeomAPI_Shape.FACE, [3, 3, 3, 3, 3, 3, 3, 3])
  70 model.testNbSubShapes(Extrusion_2, GeomAPI_Shape.EDGE, [6, 6, 6, 6, 6, 6, 6, 6])
  71 model.testNbSubShapes(Extrusion_2, GeomAPI_Shape.VERTEX, [12, 12, 12, 12, 12, 12, 12, 12])
  72 model.testResultsVolumes(Extrusion_2, [VOL, VOL, VOL, VOL, VOL, VOL, VOL, VOL])
  73
  74 assert(Part_1_doc.size("Features") == 5)
  75
  76 assert(model.checkPythonDump())