src/SketchPlugin/Test/TestOffset3.py

   1 # Copyright (C) 2020-2021  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 from salome.shaper import model
  21 from SketchAPI import *
  22
  23 model.begin()
  24 partSet = model.moduleDocument()
  25
  26 ### Create Sketch
  27 Sketch_1 = model.addSketch(partSet, model.defaultPlane("XOY"))
  28
  29 ### Create SketchLine
  30 SketchLine_1 = Sketch_1.addLine(0, 0, 0, 130)
  31
  32 ### Create SketchProjection
  33 SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "Origin"), False)
  34 SketchPoint_1 = SketchProjection_1.createdFeature()
  35 Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchAPI_Point(SketchPoint_1).coordinates())
  36 Sketch_1.setVertical(SketchLine_1.result())
  37 Sketch_1.setLength(SketchLine_1.result(), 130)
  38
  39 ### Create SketchLine
  40 SketchLine_2 = Sketch_1.addLine(0, 130, 52.63824701112046, 101.2039073554021)
  41 Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  42 Sketch_1.setLength(SketchLine_2.result(), 60)
  43
  44 ### Create SketchLine
  45 SketchLine_3 = Sketch_1.addLine(52.63824701112046, 101.2039073554021, 199.7207674554361, 130.6442229064876)
  46 Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  47 Sketch_1.setLength(SketchLine_3.result(), 150)
  48
  49 ### Create SketchConstraintAngle
  50 Sketch_1.setAngle(SketchLine_3.result(), SketchLine_2.result(), 140, type = "Direct")
  51
  52 ### Create SketchLine
  53 SketchLine_4 = Sketch_1.addLine(158.0815949372134, 7.493180231252017, 199.7207674554361, 130.6442229064876)
  54 Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.endPoint())
  55 Sketch_1.setLength(SketchLine_4.result(), 130)
  56
  57 ### Create SketchConstraintAngle
  58 Sketch_1.setAngle(SketchLine_3.result(), SketchLine_4.result(), 60, type = "Direct")
  59
  60 ### Create SketchLine
  61 SketchLine_5 = Sketch_1.addLine(158.0815949372134, 7.493180231252017, 106.6596776583922, 54.98830022657437)
  62 Sketch_1.setCoincident(SketchLine_4.startPoint(), SketchLine_5.startPoint())
  63 Sketch_1.setLength(SketchLine_5.result(), 70)
  64
  65 ### Create SketchLine
  66 SketchLine_6 = Sketch_1.addLine(106.6596776583922, 54.98830022657437, 0, 0)
  67 Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  68 Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_1.startPoint())
  69 Sketch_1.setLength(SketchLine_6.result(), 120)
  70
  71 ### Create SketchConstraintAngle
  72 Sketch_1.setAngle(SketchLine_6.result(), SketchLine_5.result(), 110, type = "Direct")
  73
  74 ### SketchOffset objects
  75 SketchOffset_objects = [SketchLine_1.result(), SketchLine_2.result(), SketchLine_3.result(), SketchLine_4.result(), SketchLine_5.result(), SketchLine_6.result()]
  76
  77 ### 1. "KeepDistance" mode
  78
  79 SketchOffset_1 = Sketch_1.addOffset(SketchOffset_objects, 8, False, "KeepDistance") # outside
  80 SketchOffset_2 = Sketch_1.addOffset(SketchOffset_objects, 8, True, "KeepDistance") # inside
  81 model.do()
  82
  83 assert(len(SketchOffset_1.offset()) == 10)
  84 assert(len(SketchOffset_2.offset()) == 8)
  85
  86 ### 2. "Arcs" mode
  87
  88 SketchOffset_3 = Sketch_1.addOffset(SketchOffset_objects, 16, False, "Arcs") # outside
  89 SketchOffset_4 = Sketch_1.addOffset(SketchOffset_objects, 16, True, "Arcs") # inside
  90 model.do()
  91
  92 assert(len(SketchOffset_3.offset()) == 12)
  93 assert(len(SketchOffset_4.offset()) == 12)
  94
  95 ### 3. "Lines" mode
  96
  97 SketchOffset_5 = Sketch_1.addOffset(SketchOffset_objects, 24, False, "Lines") # outside
  98 SketchOffset_6 = Sketch_1.addOffset(SketchOffset_objects, 24, True, "Lines") # inside
  99 model.do()
 100
 101 assert(len(SketchOffset_5.offset()) == 6)
 102 assert(len(SketchOffset_6.offset()) == 6)
 103
 104 model.end()
 105
 106 assert(model.checkPythonDump())