src/SketchPlugin/Test/TestFilletAfterFolder.py

   1 ## Copyright (C) 2018-20xx  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 """
  22     Crash when creating fillet in sketch started after a folder
  23 """
  24
  25 from salome.shaper import model
  26
  27 model.begin()
  28 partSet = model.moduleDocument()
  29 Part_1 = model.addPart(partSet)
  30 Part_1_doc = Part_1.document()
  31 model.addParameter(Part_1_doc, "Size", "80")
  32 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  33 SketchLine_1 = Sketch_1.addLine(80, 0, 0, 0)
  34 SketchProjection_1 = Sketch_1.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
  35 SketchPoint_1 = SketchProjection_1.createdFeature()
  36 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchPoint_1.result())
  37 SketchLine_2 = Sketch_1.addLine(0, 0, 0, 80)
  38 SketchLine_3 = Sketch_1.addLine(0, 80, 80, 80)
  39 SketchLine_4 = Sketch_1.addLine(80, 80, 80, 0)
  40 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_1.startPoint())
  41 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  42 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  43 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  44 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_1.result())
  45 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_2.result())
  46 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_3.result())
  47 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_4.result())
  48 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), "Size")
  49 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_2.result(), "Size")
  50 model.do()
  51 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_4r-SketchLine_3r-SketchLine_2r-SketchLine_1r")], model.selection(), "Size", 0)
  52
  53 Folder_1 = model.addFolder(Part_1_doc, Sketch_1, Extrusion_1)
  54 model.do()
  55
  56
  57 Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  58 SketchLine_5 = Sketch_2.addLine(80, 0, 0, 0)
  59 SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "PartSet/Origin"), False)
  60 SketchPoint_2 = SketchProjection_2.createdFeature()
  61 SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchPoint_2.result())
  62 SketchLine_6 = Sketch_2.addLine(0, 0, 0, 80)
  63 SketchLine_7 = Sketch_2.addLine(0, 80, 80, 80)
  64 SketchLine_8 = Sketch_2.addLine(80, 80, 80, 0)
  65 SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_5.startPoint())
  66 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  67 SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  68 SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  69 SketchConstraintHorizontal_3 = Sketch_2.setHorizontal(SketchLine_5.result())
  70 SketchConstraintVertical_3 = Sketch_2.setVertical(SketchLine_6.result())
  71 SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_7.result())
  72 SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_8.result())
  73 SketchConstraintLength_3 = Sketch_2.setLength(SketchLine_5.result(), "Size")
  74 SketchConstraintLength_4 = Sketch_2.setLength(SketchLine_6.result(), "Size")
  75 model.do()
  76
  77 lines = [SketchLine_5, SketchLine_6, SketchLine_7, SketchLine_8]
  78 for line in lines:
  79     Sketch_2.setFillet(line.endPoint())
  80     model.do()
  81
  82 assert(Sketch_2.solverError().value() == "")
  83
  84 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), 0, "2*Size")
  85
  86 model.end()
  87
  88 assert(model.checkPythonDump())