src/SketchPlugin/Test/TestEdgesOrder.py

   1 ## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 """
  22     Verify the order of sketch edges is the same after dump
  23 """
  24
  25 from salome.shaper import model
  26
  27 model.begin()
  28 partSet = model.moduleDocument()
  29 Part_1 = model.addPart(partSet)
  30 Part_1_doc = Part_1.document()
  31 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  32 SketchLine_1 = Sketch_1.addLine(40, 5, 40, -25)
  33 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_1.result(), 30)
  34 SketchLine_2 = Sketch_1.addLine(40, -25, -10, -25)
  35 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  36 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_2.result(), 50)
  37 SketchLine_3 = Sketch_1.addLine(-10, -25, -10, 5)
  38 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  39 SketchLine_4 = Sketch_1.addLine(-10, 5, 40, 5)
  40 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  41 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_4.endPoint())
  42 model.do()
  43
  44 # Change Length references
  45 SketchConstraintLength_1.feature().refattr("ConstraintEntityA").setObject(SketchLine_3.feature().lastResult())
  46 SketchConstraintLength_2.feature().refattr("ConstraintEntityA").setObject(SketchLine_4.feature().lastResult())
  47 model.do()
  48 # Remove the first line, then build it and constraints from scratch
  49 Part_1_doc.removeFeature(SketchConstraintCoincidence_1.feature())
  50 Part_1_doc.removeFeature(SketchConstraintCoincidence_4.feature())
  51 Part_1_doc.removeFeature(SketchLine_1.feature())
  52 SketchLine_1 = Sketch_1.addLine(40, 5, 40, -25)
  53 Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  54 Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_4.endPoint())
  55 Sketch_1.setLength(SketchLine_1.result(), 20)
  56 Sketch_1.setLength(SketchLine_2.result(), 40)
  57 model.do()
  58 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2r-SketchLine_3r-SketchLine_4r")], model.selection(), 10, 0)
  59
  60 # Extrude all lateral faces to check their area
  61 Extrusion_2 = model.addExtrusion(Part_1_doc, [], model.selection(), 10, 0)
  62 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_1"))
  63 SketchLine_5 = Sketch_2.addLine(0.7346748749771982, 2.736245541082907e-015, 0.7346748749771982, 10.00000000000001)
  64 SketchProjection_1 = Sketch_2.addProjection(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_1&Extrusion_1_1/From_Face_1"), False)
  65 SketchPoint_1 = SketchProjection_1.createdFeature()
  66 SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_5.startPoint(), SketchPoint_1.result())
  67 SketchProjection_2 = Sketch_2.addProjection(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_1"), False)
  68 SketchPoint_2 = SketchProjection_2.createdFeature()
  69 SketchConstraintCoincidence_6 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchPoint_2.result())
  70 SketchLine_6 = Sketch_2.addLine(0.7346748749771982, 10.00000000000001, -19.2653251250228, 10.00000000000001)
  71 SketchConstraintCoincidence_7 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  72 SketchProjection_3 = Sketch_2.addProjection(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_1"), False)
  73 SketchPoint_3 = SketchProjection_3.createdFeature()
  74 SketchConstraintCoincidence_8 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchPoint_3.result())
  75 SketchLine_7 = Sketch_2.addLine(-19.2653251250228, 10.00000000000001, -19.2653251250228, 2.775557561562891e-015)
  76 SketchConstraintCoincidence_9 = Sketch_2.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  77 SketchProjection_4 = Sketch_2.addProjection(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_1&Extrusion_1_1/From_Face_1"), False)
  78 SketchPoint_4 = SketchProjection_4.createdFeature()
  79 SketchConstraintCoincidence_10 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchPoint_4.result())
  80 SketchLine_8 = Sketch_2.addLine(-19.2653251250228, 2.775557561562891e-015, 0.7346748749771974, 3.386180225106727e-015)
  81 SketchConstraintCoincidence_11 = Sketch_2.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  82 SketchConstraintCoincidence_12 = Sketch_2.setCoincident(SketchLine_5.startPoint(), SketchLine_8.endPoint())
  83 Extrusion_2.setNestedSketch(Sketch_2)
  84
  85 Extrusion_3 = model.addExtrusion(Part_1_doc, [], model.selection(), 10, 0)
  86 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_2"))
  87 SketchLine_9 = Sketch_3.addLine(36.86324678550901, 2.286454635368208e-015, 36.86324678550901, 10)
  88 SketchProjection_5 = Sketch_3.addProjection(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_1&Extrusion_1_1/From_Face_1"), False)
  89 SketchPoint_5 = SketchProjection_5.createdFeature()
  90 SketchConstraintCoincidence_13 = Sketch_3.setCoincident(SketchLine_9.startPoint(), SketchPoint_5.result())
  91 SketchProjection_6 = Sketch_3.addProjection(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_1"), False)
  92 SketchPoint_6 = SketchProjection_6.createdFeature()
  93 SketchConstraintCoincidence_14 = Sketch_3.setCoincident(SketchLine_9.endPoint(), SketchPoint_6.result())
  94 SketchLine_10 = Sketch_3.addLine(36.86324678550901, 10, -3.136753214490995, 10)
  95 SketchConstraintCoincidence_15 = Sketch_3.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
  96 SketchProjection_7 = Sketch_3.addProjection(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_2&Extrusion_1_1/To_Face_1"), False)
  97 SketchPoint_7 = SketchProjection_7.createdFeature()
  98 SketchConstraintCoincidence_16 = Sketch_3.setCoincident(SketchLine_10.endPoint(), SketchPoint_7.result())
  99 SketchLine_11 = Sketch_3.addLine(-3.136753214490995, 10, -3.136753214490995, 2.275957200481571e-015)
 100 SketchConstraintCoincidence_17 = Sketch_3.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
 101 SketchProjection_8 = Sketch_3.addProjection(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_2&Extrusion_1_1/From_Face_1"), False)
 102 SketchPoint_8 = SketchProjection_8.createdFeature()
 103 SketchConstraintCoincidence_18 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchPoint_8.result())
 104 SketchLine_12 = Sketch_3.addLine(-3.136753214490995, 2.275957200481571e-015, 36.86324678550902, 1.387778780781446e-015)
 105 SketchConstraintCoincidence_19 = Sketch_3.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
 106 SketchConstraintCoincidence_20 = Sketch_3.setCoincident(SketchLine_9.startPoint(), SketchLine_12.endPoint())
 107 Extrusion_3.setNestedSketch(Sketch_3)
 108
 109 Extrusion_4 = model.addExtrusion(Part_1_doc, [], model.selection(), 10, 0)
 110 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_3"))
 111 SketchLine_13 = Sketch_4.addLine(22.60959895285982, 4.420942808558057e-016, 22.60959895285982, 10)
 112 SketchProjection_9 = Sketch_4.addProjection(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_2&Extrusion_1_1/From_Face_1"), False)
 113 SketchPoint_9 = SketchProjection_9.createdFeature()
 114 SketchConstraintCoincidence_21 = Sketch_4.setCoincident(SketchLine_13.startPoint(), SketchPoint_9.result())
 115 SketchProjection_10 = Sketch_4.addProjection(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_2&Extrusion_1_1/To_Face_1"), False)
 116 SketchPoint_10 = SketchProjection_10.createdFeature()
 117 SketchConstraintCoincidence_22 = Sketch_4.setCoincident(SketchLine_13.endPoint(), SketchPoint_10.result())
 118 SketchLine_14 = Sketch_4.addLine(22.60959895285982, 10, -7.390401047140179, 10)
 119 SketchConstraintCoincidence_23 = Sketch_4.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
 120 SketchProjection_11 = Sketch_4.addProjection(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1"), False)
 121 SketchPoint_11 = SketchProjection_11.createdFeature()
 122 SketchConstraintCoincidence_24 = Sketch_4.setCoincident(SketchLine_14.endPoint(), SketchPoint_11.result())
 123 SketchLine_15 = Sketch_4.addLine(-7.390401047140179, 10, -7.390401047140179, 8.881784197001252e-016)
 124 SketchConstraintCoincidence_25 = Sketch_4.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
 125 SketchProjection_12 = Sketch_4.addProjection(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_3&Extrusion_1_1/From_Face_1"), False)
 126 SketchPoint_12 = SketchProjection_12.createdFeature()
 127 SketchConstraintCoincidence_26 = Sketch_4.setCoincident(SketchLine_15.endPoint(), SketchPoint_12.result())
 128 SketchLine_16 = Sketch_4.addLine(-7.390401047140179, 8.881784197001252e-016, 22.60959895285983, 0)
 129 SketchConstraintCoincidence_27 = Sketch_4.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint())
 130 SketchConstraintCoincidence_28 = Sketch_4.setCoincident(SketchLine_13.startPoint(), SketchLine_16.endPoint())
 131 Extrusion_4.setNestedSketch(Sketch_4)
 132
 133 Extrusion_5 = model.addExtrusion(Part_1_doc, [], model.selection(), 10, 0)
 134 Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"))
 135 SketchLine_17 = Sketch_5.addLine(-10.64977324988603, -1.185841873934692e-016, -10.64977324988603, -10)
 136 SketchProjection_13 = Sketch_5.addProjection(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_3&Extrusion_1_1/From_Face_1"), False)
 137 SketchPoint_13 = SketchProjection_13.createdFeature()
 138 SketchConstraintCoincidence_29 = Sketch_5.setCoincident(SketchLine_17.startPoint(), SketchPoint_13.result())
 139 SketchProjection_14 = Sketch_5.addProjection(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1"), False)
 140 SketchPoint_14 = SketchProjection_14.createdFeature()
 141 SketchConstraintCoincidence_30 = Sketch_5.setCoincident(SketchLine_17.endPoint(), SketchPoint_14.result())
 142 SketchLine_18 = Sketch_5.addLine(-10.64977324988603, -10, 39.35022675011398, -10)
 143 SketchConstraintCoincidence_31 = Sketch_5.setCoincident(SketchLine_17.endPoint(), SketchLine_18.startPoint())
 144 SketchProjection_15 = Sketch_5.addProjection(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_1"), False)
 145 SketchPoint_15 = SketchProjection_15.createdFeature()
 146 SketchConstraintCoincidence_32 = Sketch_5.setCoincident(SketchLine_18.endPoint(), SketchPoint_15.result())
 147 SketchLine_19 = Sketch_5.addLine(39.35022675011398, -10, 39.35022675011398, 4.440892098500626e-016)
 148 SketchConstraintCoincidence_33 = Sketch_5.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint())
 149 SketchProjection_16 = Sketch_5.addProjection(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_1&Extrusion_1_1/From_Face_1"), False)
 150 SketchPoint_16 = SketchProjection_16.createdFeature()
 151 SketchConstraintCoincidence_34 = Sketch_5.setCoincident(SketchLine_19.endPoint(), SketchPoint_16.result())
 152 SketchLine_20 = Sketch_5.addLine(39.35022675011398, 4.440892098500626e-016, -10.64977324988603, 0)
 153 SketchConstraintCoincidence_35 = Sketch_5.setCoincident(SketchLine_19.endPoint(), SketchLine_20.startPoint())
 154 SketchConstraintCoincidence_36 = Sketch_5.setCoincident(SketchLine_17.startPoint(), SketchLine_20.endPoint())
 155 Extrusion_5.setNestedSketch(Sketch_5)
 156 model.do()
 157 model.end()
 158
 159 # check volumes
 160 model.testResultsVolumes(Extrusion_2, [4000])
 161 model.testResultsVolumes(Extrusion_3, [3000])
 162 model.testResultsVolumes(Extrusion_4, [5000])
 163 model.testResultsVolumes(Extrusion_5, [2000])
 164
 165 assert(model.checkPythonDump())
 166
 167 # check volumes after dump and restore
 168 model.testResultsVolumes(Extrusion_2, [4000])
 169 model.testResultsVolumes(Extrusion_3, [3000])
 170 model.testResultsVolumes(Extrusion_4, [5000])
 171 model.testResultsVolumes(Extrusion_5, [2000])