src/SketchPlugin/Test/Test1966.py

   1 """
   2     Test1966.py
   3     Test case for issue #1966 "Sketch solving is 25 times slower between two studies with middle point"
   4 """
   5
   6 from salome.shaper import model
   7 from timeit import default_timer as timer
   8 import math
   9
  10 # convenient ratio of time moving point to time creating sketch
  11 MOVE_BUILD_RATIO = 0.1
  12 # tolerance for comparison of reals
  13 TOLERANCE = 1.e-7
  14
  15 #=========================================================================
  16 # Auxiliary functions
  17 #=========================================================================
  18 def angle(theStartPoint1, theEndPoint1, theStartPoint2, theEndPoint2):
  19     # subroutine to calculate angle between two lines
  20     aDirX1 = theEndPoint1.x() - theStartPoint1.x()
  21     aDirY1 = theEndPoint1.y() - theStartPoint1.y()
  22     aLen1 = math.hypot(aDirX1, aDirY1)
  23     aDirX2 = theEndPoint2.x() - theStartPoint2.x()
  24     aDirY2 = theEndPoint2.y() - theStartPoint2.y()
  25     aLen2 = math.hypot(aDirX2, aDirY2)
  26
  27     aDot = aDirX1 * aDirX2 + aDirY1 * aDirY2
  28
  29     anAngle = math.acos(aDot / aLen1 / aLen2)
  30     return round(anAngle * 180. / math.pi, 6)
  31
  32 #=========================================================================
  33 # Initial model
  34 #=========================================================================
  35
  36 model.begin()
  37 partSet = model.moduleDocument()
  38 Part_1 = model.addPart(partSet)
  39 Part_1_doc = Part_1.document()
  40 model.addParameter(Part_1_doc, "ep_jupe", "0.188")
  41
  42 # time to build sketch
  43 sketchTime = timer()
  44
  45 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
  46 SketchLine_1 = Sketch_1.addLine(-6.376, 9.025, -6.376, -2.25)
  47 SketchLine_2 = Sketch_1.addLine(-6.376, -2.25, -6.538, -2.4)
  48 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  49 SketchLine_3 = Sketch_1.addLine(-6.538, -2.4, -6.538, -3.45)
  50 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  51 SketchLine_4 = Sketch_1.addLine(-6.538, -3.45, -7.782, -3.45)
  52 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  53 SketchLine_5 = Sketch_1.addLine(-7.782, -3.45, -7.782, -6.45)
  54 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  55 SketchLine_6 = Sketch_1.addLine(-7.782, -6.45, 0, -6.45)
  56 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  57 SketchLine_7 = Sketch_1.addLine(0, -6.45, 0, -3.45)
  58 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  59 SketchLine_8 = Sketch_1.addLine(0, -3.45, -6.188, -3.45)
  60 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  61 SketchLine_9 = Sketch_1.addLine(-6.188, -3.45, -6.188, 9.025)
  62 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  63 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_9.result())
  64 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_1.result())
  65 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_3.result())
  66 SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_5.result())
  67 SketchConstraintVertical_5 = Sketch_1.setVertical(SketchLine_7.result())
  68 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_4.result())
  69 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_8.result())
  70 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_6.result())
  71 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_4.result())
  72 SketchLine_10 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OZ"))
  73 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_8.startPoint(), SketchLine_10.result())
  74 SketchLine_11 = Sketch_1.addLine(-6.376, 9.025, -6.538, 9.187)
  75 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_11.startPoint())
  76 SketchLine_12 = Sketch_1.addLine(-6.538, 9.187, -6.538, 10.256)
  77 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
  78 SketchLine_13 = Sketch_1.addLine(-6.538, 10.256, -6.188, 10.256)
  79 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
  80 SketchLine_14 = Sketch_1.addLine(-6.188, 9.025, -6.084266646261868, 9.523738867722166)
  81 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_14.startPoint())
  82 SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_13.result())
  83 SketchConstraintVertical_6 = Sketch_1.setVertical(SketchLine_12.result())
  84 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_7.result(), 3)
  85 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_2.startPoint(), SketchLine_9.result(), "ep_jupe")
  86 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_4.startPoint(), SketchLine_9.result(), 0.35)
  87 SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_8.endPoint(), SketchLine_10.result(), 6.188)
  88 SketchLine_15 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OX"))
  89 SketchConstraintDistance_4 = Sketch_1.setDistance(SketchLine_1.startPoint(), SketchLine_15.result(), 9.025)
  90 SketchLine_16 = Sketch_1.addLine(-6.376, 9.025, -6.188, 9.025)
  91 SketchLine_16.setAuxiliary(True)
  92 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_16.startPoint())
  93 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_11.startPoint(), SketchLine_16.startPoint())
  94 SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_16.endPoint())
  95 SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_14.startPoint(), SketchLine_16.endPoint())
  96 SketchConstraintHorizontal_5 = Sketch_1.setHorizontal(SketchLine_16.result())
  97 SketchConstraintDistance_5 = Sketch_1.setDistance(SketchLine_2.startPoint(), SketchLine_15.result(), 2.25)
  98 SketchConstraintDistance_6 = Sketch_1.setDistance(SketchLine_3.startPoint(), SketchLine_15.result(), 2.4)
  99 SketchConstraintDistance_7 = Sketch_1.setDistance(SketchLine_4.startPoint(), SketchLine_15.result(), 3.45)
 100 SketchLine_17 = Sketch_1.addLine(-6.282, 9.025, -6.282, -4.050005366189866)
 101 SketchLine_17.setAuxiliary(True)
 102 SketchConstraintVertical_7 = Sketch_1.setVertical(SketchLine_17.result())
 103 SketchPoint_1 = Sketch_1.addPoint(-6.282, 9.025)
 104 SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchLine_17.startPoint(), SketchPoint_1.coordinates())
 105 SketchConstraintCoincidence_20 = Sketch_1.setCoincident(SketchPoint_1.coordinates(), SketchLine_16.result())
 106 SketchConstraintMiddle_1 = Sketch_1.setMiddlePoint(SketchPoint_1.coordinates(), SketchLine_16.result())
 107 SketchLine_18 = Sketch_1.addLine(-5.532, -4.050005366189866, -7.032, -4.050005366189866)
 108 SketchLine_19 = Sketch_1.addLine(-7.032, -4.050005366189866, -7.032, -5.850005366189865)
 109 SketchLine_20 = Sketch_1.addLine(-7.032, -5.850005366189865, -5.532, -5.850005366189865)
 110 SketchLine_21 = Sketch_1.addLine(-5.532, -5.850005366189865, -5.532, -4.050005366189866)
 111 SketchConstraintCoincidence_21 = Sketch_1.setCoincident(SketchLine_21.endPoint(), SketchLine_18.startPoint())
 112 SketchConstraintCoincidence_22 = Sketch_1.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint())
 113 SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchLine_19.endPoint(), SketchLine_20.startPoint())
 114 SketchConstraintCoincidence_24 = Sketch_1.setCoincident(SketchLine_20.endPoint(), SketchLine_21.startPoint())
 115 SketchConstraintHorizontal_6 = Sketch_1.setHorizontal(SketchLine_18.result())
 116 SketchConstraintVertical_8 = Sketch_1.setVertical(SketchLine_19.result())
 117 SketchConstraintHorizontal_7 = Sketch_1.setHorizontal(SketchLine_20.result())
 118 SketchConstraintVertical_9 = Sketch_1.setVertical(SketchLine_21.result())
 119 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_20.result(), 1.5)
 120 SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_19.result(), 1.8)
 121 SketchConstraintCoincidence_25 = Sketch_1.setCoincident(SketchLine_17.endPoint(), SketchLine_18.result())
 122 SketchConstraintMiddle_2 = Sketch_1.setMiddlePoint(SketchLine_18.result(), SketchLine_17.endPoint())
 123 SketchConstraintDistance_8 = Sketch_1.setDistance(SketchLine_17.endPoint(), SketchLine_5.result(), 1.5)
 124 SketchConstraintDistance_9 = Sketch_1.setDistance(SketchLine_11.endPoint(), SketchLine_17.result(), 0.256)
 125 SketchConstraintDistance_10 = Sketch_1.setDistance(SketchLine_11.endPoint(), SketchLine_15.result(), 9.187)
 126 SketchConstraintDistance_11 = Sketch_1.setDistance(SketchLine_12.endPoint(), SketchLine_15.result(), 10.256)
 127 SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_13.result(), 0.35)
 128 SketchLine_22 = Sketch_1.addLine(-6.188, 10.256, -4.938, 10.97786688777511)
 129 SketchConstraintCoincidence_26 = Sketch_1.setCoincident(SketchLine_13.endPoint(), SketchLine_22.startPoint())
 130 SketchArc_1 = Sketch_1.addArc(-4.794548536090929, 9.26204592494933, -6.084266646261868, 9.523738867722166, -5.676829966640709, 10.23848613167324, True)
 131 SketchConstraintCoincidence_27 = Sketch_1.setCoincident(SketchLine_14.endPoint(), SketchArc_1.startPoint())
 132 SketchLine_23 = Sketch_1.addLine(-5.676829966640709, 10.23848613167324, -4.794548536090929, 9.26204592494933)
 133 SketchLine_23.setAuxiliary(True)
 134 SketchConstraintCoincidence_28 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_23.startPoint())
 135 SketchConstraintCoincidence_39 = Sketch_1.setCoincident(SketchLine_23.endPoint(), SketchArc_1.center())
 136 SketchArc_2 = Sketch_1.addArc(0, 2.425, -4.938, 10.97786688777511, 0, 12.301, True)
 137 SketchConstraintCoincidence_30 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_10.result())
 138 SketchConstraintCoincidence_31 = Sketch_1.setCoincident(SketchLine_22.endPoint(), SketchArc_2.startPoint())
 139 SketchConstraintCoincidence_32 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_10.result())
 140 SketchConstraintDistance_12 = Sketch_1.setDistance(SketchArc_2.center(), SketchLine_15.result(), 2.425)
 141 SketchLine_24 = Sketch_1.addLine(0, 12.301, 0, 12.137)
 142 SketchConstraintCoincidence_33 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_24.startPoint())
 143 SketchArc_3 = Sketch_1.addArc(0, 2.425, -5.877900790328188, 10.25907418263698, 2.067397663006541, 11.99831201324782, True)
 144 SketchArc_3.setName("SketchArc_4")
 145 SketchArc_3.result().setName("SketchArc_4")
 146 SketchArc_3.results()[1].setName("SketchArc_4_2")
 147 SketchArc_3.setAuxiliary(True)
 148 SketchConstraintCoincidence_34 = Sketch_1.setCoincident(SketchArc_2.center(), SketchArc_3.center())
 149 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_3.results()[1], 9.794)
 150 SketchPoint_2 = Sketch_1.addPoint(0, 12.219)
 151 SketchConstraintCoincidence_35 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchLine_24.result())
 152 SketchConstraintCoincidence_36 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchArc_3.results()[1])
 153 SketchConstraintMiddle_3 = Sketch_1.setMiddlePoint(SketchPoint_2.coordinates(), SketchLine_24.result())
 154 SketchLine_25 = Sketch_1.addLine(-5.676829966640709, 10.23848613167324, -5.417460848824602, 10.45671600291324)
 155 SketchConstraintCoincidence_37 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_25.startPoint())
 156 SketchConstraintCoincidence_38 = Sketch_1.setCoincident(SketchLine_23.startPoint(), SketchLine_25.startPoint())
 157 SketchLine_26 = Sketch_1.addLine(-5.417460848824602, 10.45671600291324, -5.143396378647499, 10.65615482129426)
 158 SketchConstraintCoincidence_39 = Sketch_1.setCoincident(SketchLine_25.endPoint(), SketchLine_26.startPoint())
 159 SketchLine_27 = Sketch_1.addLine(-5.143396378647499, 10.65615482129426, -4.856000000000008, 10.83583872155447)
 160 SketchConstraintCoincidence_40 = Sketch_1.setCoincident(SketchLine_26.endPoint(), SketchLine_27.startPoint())
 161 SketchArc_4 = Sketch_1.addArc(0, 2.425, -4.856, 10.83583872155447, 0, 12.137, True)
 162 SketchArc_4.setName("SketchArc_5")
 163 SketchArc_4.result().setName("SketchArc_5")
 164 SketchArc_4.results()[1].setName("SketchArc_5_2")
 165 SketchConstraintCoincidence_41 = Sketch_1.setCoincident(SketchArc_2.center(), SketchArc_4.center())
 166 SketchConstraintCoincidence_42 = Sketch_1.setCoincident(SketchArc_3.center(), SketchArc_4.center())
 167 SketchConstraintCoincidence_43 = Sketch_1.setCoincident(SketchLine_27.endPoint(), SketchArc_4.startPoint())
 168 SketchConstraintCoincidence_44 = Sketch_1.setCoincident(SketchLine_24.endPoint(), SketchArc_4.endPoint())
 169 SketchConstraintLength_5 = Sketch_1.setLength(SketchLine_24.result(), "0.082*2")
 170 SketchLine_28 = Sketch_1.addLine(-4.938, 10.97786688777511, 0, 2.425)
 171 SketchLine_28.setAuxiliary(True)
 172 SketchConstraintCoincidence_45 = Sketch_1.setCoincident(SketchLine_22.endPoint(), SketchLine_28.startPoint())
 173 SketchConstraintCoincidence_46 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_28.startPoint())
 174 SketchConstraintCoincidence_47 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_28.endPoint())
 175 SketchConstraintCoincidence_48 = Sketch_1.setCoincident(SketchArc_3.center(), SketchLine_28.endPoint())
 176 SketchConstraintCoincidence_49 = Sketch_1.setCoincident(SketchArc_4.center(), SketchLine_28.endPoint())
 177 SketchConstraintCoincidence_50 = Sketch_1.setCoincident(SketchLine_28.result(), SketchLine_27.endPoint())
 178 SketchConstraintAngle_1 = Sketch_1.setAngleBackward(SketchLine_28.result(), SketchLine_10.result(), 30)
 179 SketchLine_29 = Sketch_1.addLine(-5.143396378647499, 10.65615482129426, 0, 2.425)
 180 SketchLine_29.setAuxiliary(True)
 181 SketchConstraintCoincidence_51 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_29.endPoint())
 182 SketchConstraintCoincidence_52 = Sketch_1.setCoincident(SketchArc_3.center(), SketchLine_29.endPoint())
 183 SketchConstraintCoincidence_53 = Sketch_1.setCoincident(SketchArc_4.center(), SketchLine_29.endPoint())
 184 SketchConstraintCoincidence_54 = Sketch_1.setCoincident(SketchLine_28.endPoint(), SketchLine_29.endPoint())
 185 SketchConstraintCoincidence_55 = Sketch_1.setCoincident(SketchLine_26.endPoint(), SketchLine_29.startPoint())
 186 SketchConstraintAngle_2 = Sketch_1.setAngleBackward(SketchLine_29.result(), SketchLine_10.result(), 32)
 187 SketchLine_30 = Sketch_1.addLine(-5.417460848824602, 10.45671600291324, 0, 2.425)
 188 SketchLine_30.setAuxiliary(True)
 189 SketchConstraintCoincidence_56 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_30.endPoint())
 190 SketchConstraintCoincidence_57 = Sketch_1.setCoincident(SketchArc_3.center(), SketchLine_30.endPoint())
 191 SketchConstraintCoincidence_58 = Sketch_1.setCoincident(SketchArc_4.center(), SketchLine_30.endPoint())
 192 SketchConstraintCoincidence_59 = Sketch_1.setCoincident(SketchLine_28.endPoint(), SketchLine_30.endPoint())
 193 SketchConstraintCoincidence_60 = Sketch_1.setCoincident(SketchLine_29.endPoint(), SketchLine_30.endPoint())
 194 SketchConstraintCoincidence_61 = Sketch_1.setCoincident(SketchLine_25.endPoint(), SketchLine_30.startPoint())
 195 SketchConstraintAngle_3 = Sketch_1.setAngleBackward(SketchLine_30.result(), SketchLine_10.result(), 34)
 196 SketchLine_31 = Sketch_1.addLine(0, 2.425, -5.676829966640709, 10.23848613167324)
 197 SketchLine_31.setName("SketchLine_35")
 198 SketchLine_31.result().setName("SketchLine_35")
 199 SketchLine_31.setAuxiliary(True)
 200 SketchConstraintCoincidence_62 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_31.startPoint())
 201 SketchConstraintCoincidence_63 = Sketch_1.setCoincident(SketchArc_3.center(), SketchLine_31.startPoint())
 202 SketchConstraintCoincidence_64 = Sketch_1.setCoincident(SketchArc_4.center(), SketchLine_31.startPoint())
 203 SketchConstraintCoincidence_65 = Sketch_1.setCoincident(SketchLine_28.endPoint(), SketchLine_31.startPoint())
 204 SketchConstraintCoincidence_66 = Sketch_1.setCoincident(SketchLine_29.endPoint(), SketchLine_31.startPoint())
 205 SketchConstraintCoincidence_67 = Sketch_1.setCoincident(SketchLine_30.endPoint(), SketchLine_31.startPoint())
 206 SketchConstraintCoincidence_68 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_31.endPoint())
 207 SketchConstraintAngle_4 = Sketch_1.setAngleBackward(SketchLine_31.result(), SketchLine_10.result(), 36)
 208 SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_1.results()[1], 1.316)
 209 SketchLine_32 = Sketch_1.addLine(-4.794548536090929, 9.26204592494933, -4.794548536090929, 9.764655753971969)
 210 SketchLine_32.setName("SketchLine_38")
 211 SketchLine_32.result().setName("SketchLine_38")
 212 SketchLine_32.setAuxiliary(True)
 213 SketchConstraintCoincidence_69 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_32.startPoint())
 214 SketchConstraintCoincidence_70 = Sketch_1.setCoincident(SketchLine_23.endPoint(), SketchLine_32.startPoint())
 215 SketchConstraintVertical_10 = Sketch_1.setVertical(SketchLine_32.result())
 216 SketchConstraintAngle_5 = Sketch_1.setAngleBackward(SketchLine_23.result(), SketchLine_32.result(), 42.1)
 217 SketchLine_33 = Sketch_1.addLine(-4.794548536090929, 9.26204592494933, -5.10267883886141, 9.26204592494933)
 218 SketchLine_33.setName("SketchLine_39")
 219 SketchLine_33.result().setName("SketchLine_39")
 220 SketchLine_33.setAuxiliary(True)
 221 SketchConstraintCoincidence_71 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_33.startPoint())
 222 SketchConstraintCoincidence_72 = Sketch_1.setCoincident(SketchLine_23.endPoint(), SketchLine_33.startPoint())
 223 SketchConstraintCoincidence_73 = Sketch_1.setCoincident(SketchLine_32.startPoint(), SketchLine_33.startPoint())
 224 SketchConstraintHorizontal_8 = Sketch_1.setHorizontal(SketchLine_33.result())
 225 SketchLine_34 = Sketch_1.addLine(-6.084266646261868, 9.523738867722166, -4.794548536090929, 9.26204592494933)
 226 SketchLine_34.setName("SketchLine_40")
 227 SketchLine_34.result().setName("SketchLine_40")
 228 SketchLine_34.setAuxiliary(True)
 229 SketchConstraintCoincidence_74 = Sketch_1.setCoincident(SketchLine_14.endPoint(), SketchLine_34.startPoint())
 230 SketchConstraintCoincidence_75 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_34.startPoint())
 231 SketchConstraintCoincidence_76 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_34.endPoint())
 232 SketchConstraintCoincidence_77 = Sketch_1.setCoincident(SketchLine_23.endPoint(), SketchLine_34.endPoint())
 233 SketchConstraintCoincidence_78 = Sketch_1.setCoincident(SketchLine_32.startPoint(), SketchLine_34.endPoint())
 234 SketchConstraintCoincidence_79 = Sketch_1.setCoincident(SketchLine_33.startPoint(), SketchLine_34.endPoint())
 235 SketchConstraintCoincidence_80 = Sketch_1.setCoincident(SketchArc_4.endPoint(), SketchLine_10.result())
 236 SketchConstraintAngle_6 = Sketch_1.setAngleBackward(SketchLine_33.result(), SketchLine_34.result(), 11.47)
 237 SketchLine_35 = Sketch_1.addLine(-5.676829966640709, 10.23848613167324, -5.756768760952487, 10.34851244290823)
 238 SketchLine_35.setName("SketchLine_36")
 239 SketchLine_35.result().setName("SketchLine_36")
 240 SketchLine_35.setAuxiliary(True)
 241 SketchConstraintCoincidence_81 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_35.startPoint())
 242 SketchConstraintCoincidence_82 = Sketch_1.setCoincident(SketchLine_23.startPoint(), SketchLine_35.startPoint())
 243 SketchConstraintCoincidence_83 = Sketch_1.setCoincident(SketchLine_25.startPoint(), SketchLine_35.startPoint())
 244 SketchConstraintCoincidence_84 = Sketch_1.setCoincident(SketchLine_31.endPoint(), SketchLine_35.startPoint())
 245 SketchConstraintCoincidence_85 = Sketch_1.setCoincident(SketchLine_35.endPoint(), SketchArc_3.results()[1])
 246 SketchLine_36 = Sketch_1.addLine(-5.417460848824602, 10.45671600291324, -5.476735296592498, 10.54459398560407)
 247 SketchLine_36.setName("SketchLine_37")
 248 SketchLine_36.result().setName("SketchLine_37")
 249 SketchLine_36.setAuxiliary(True)
 250 SketchConstraintCoincidence_86 = Sketch_1.setCoincident(SketchLine_25.endPoint(), SketchLine_36.startPoint())
 251 SketchConstraintCoincidence_87 = Sketch_1.setCoincident(SketchLine_26.startPoint(), SketchLine_36.startPoint())
 252 SketchConstraintCoincidence_88 = Sketch_1.setCoincident(SketchLine_30.startPoint(), SketchLine_36.startPoint())
 253 SketchConstraintCoincidence_89 = Sketch_1.setCoincident(SketchLine_36.endPoint(), SketchArc_3.results()[1])
 254 SketchLine_37 = Sketch_1.addLine(-5.143396378647499, 10.65615482129426, -5.190029273900022, 10.73078305375603)
 255 SketchLine_37.setName("SketchLine_41")
 256 SketchLine_37.result().setName("SketchLine_41")
 257 SketchLine_37.setAuxiliary(True)
 258 SketchConstraintCoincidence_90 = Sketch_1.setCoincident(SketchLine_26.endPoint(), SketchLine_37.startPoint())
 259 SketchConstraintCoincidence_91 = Sketch_1.setCoincident(SketchLine_27.startPoint(), SketchLine_37.startPoint())
 260 SketchConstraintCoincidence_92 = Sketch_1.setCoincident(SketchLine_29.startPoint(), SketchLine_37.startPoint())
 261 SketchConstraintCoincidence_93 = Sketch_1.setCoincident(SketchLine_37.endPoint(), SketchArc_3.results()[1])
 262 SketchConstraintParallel_1 = Sketch_1.setParallel(SketchLine_35.result(), SketchLine_31.result())
 263 SketchConstraintParallel_2 = Sketch_1.setParallel(SketchLine_36.result(), SketchLine_30.result())
 264 SketchConstraintParallel_3 = Sketch_1.setParallel(SketchLine_37.result(), SketchLine_29.result())
 265 SketchConstraintLength_6 = Sketch_1.setLength(SketchLine_35.result(), 0.136)
 266 SketchConstraintLength_7 = Sketch_1.setLength(SketchLine_36.result(), 0.106)
 267 SketchConstraintLength_8 = Sketch_1.setLength(SketchLine_37.result(), 0.088)
 268 model.do()
 269
 270 sketchTime = timer() - sketchTime
 271 print "Sketch creation time: {0}".format(sketchTime)
 272 expectedTime = MOVE_BUILD_RATIO * sketchTime
 273 averageTime = 0
 274 nbMoves = 0
 275
 276 #=========================================================================
 277 # Move point under the Middle point constraint and check execution time.
 278 # This point is fully constrained, so its coordinates should not be changed.
 279 #=========================================================================
 280 aPoint = SketchPoint_1.coordinates()
 281 X = aPoint.x()
 282 Y = aPoint.y()
 283 deltas = [(0.0, 0.1), (0.1, 0.0), (-0.1, 0.1), (1.0, 0.0), (0.0, -1.0), (-0.5, -0.2), (-0.3, 0.3)]
 284 for deltaX, deltaY in deltas:
 285     movementTime = timer()
 286     aPoint.setValue(X, Y + 0.1)
 287     model.do()
 288     movementTime = timer() - movementTime
 289     assert movementTime < expectedTime, "Time to move point {0} is greater than expected {1}".format(movementTime, expectedTime)
 290     assert math.fabs(aPoint.x() - X) < TOLERANCE and math.fabs(aPoint.y() - Y) < TOLERANCE, "({0}, {1}) != ({2}, {3})".format(aPoint.x(), aPoint.y(), X, Y)
 291     averageTime += movementTime
 292     nbMoves += 1
 293 print "Movement average time: {0}".format(averageTime / nbMoves)
 294
 295 #=========================================================================
 296 # Change value of SketchConstraintAngle_6 and check execution time.
 297 # Check constrained objects are satisfy this constraint.
 298 # Check the middle point stays on its place.
 299 #=========================================================================
 300 averageTime = 0
 301 nbMoves = 0
 302 for ang in range(12, 30):
 303     movementTime = timer()
 304     SketchConstraintAngle_6.feature().real("AngleValue").setValue(ang)
 305     model.do()
 306     movementTime = timer() - movementTime
 307     assert movementTime < expectedTime, "Time to change angle {0} is greater than expected {1}".format(movementTime, expectedTime)
 308     curAngle = angle(SketchLine_33.startPoint(), SketchLine_33.endPoint(), SketchLine_34.endPoint(), SketchLine_34.startPoint())
 309     assert math.fabs(curAngle - ang) < TOLERANCE, "angle {0} != {1} expected".format(curAngle, ang)
 310     averageTime += movementTime
 311     nbMoves += 1
 312 print "Changing angle average time: {0}".format(averageTime / nbMoves)
 313
 314 model.end()
 315
 316
 317 assert(model.checkPythonDump())