src/SketchPlugin/Test/Test1966.py

   1 # Copyright (C) 2014-2019  CEA/DEN, EDF R&D
   2 #
   3 # This library is free software; you can redistribute it and/or
   4 # modify it under the terms of the GNU Lesser General Public
   5 # License as published by the Free Software Foundation; either
   6 # version 2.1 of the License, or (at your option) any later version.
   7 #
   8 # This library is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 # Lesser General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU Lesser General Public
  14 # License along with this library; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  16 #
  17 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
  18 #
  19
  20 """
  21     Test1966.py
  22     Test case for issue #1966 "Sketch solving is 25 times slower between two studies with middle point"
  23 """
  24
  25 from salome.shaper import model
  26 from timeit import default_timer as timer
  27 import math
  28
  29 # convenient ratio of time moving point to time creating sketch
  30 MOVE_BUILD_RATIO = 0.1
  31 # tolerance for comparison of reals
  32 TOLERANCE = 1.e-7
  33
  34 #=========================================================================
  35 # Auxiliary functions
  36 #=========================================================================
  37 def angle(theStartPoint1, theEndPoint1, theStartPoint2, theEndPoint2):
  38     # subroutine to calculate angle between two lines
  39     aDirX1 = theEndPoint1.x() - theStartPoint1.x()
  40     aDirY1 = theEndPoint1.y() - theStartPoint1.y()
  41     aLen1 = math.hypot(aDirX1, aDirY1)
  42     aDirX2 = theEndPoint2.x() - theStartPoint2.x()
  43     aDirY2 = theEndPoint2.y() - theStartPoint2.y()
  44     aLen2 = math.hypot(aDirX2, aDirY2)
  45
  46     aDot = aDirX1 * aDirX2 + aDirY1 * aDirY2
  47
  48     anAngle = math.acos(aDot / aLen1 / aLen2)
  49     return round(anAngle * 180. / math.pi, 6)
  50
  51 #=========================================================================
  52 # Initial model
  53 #=========================================================================
  54
  55 model.begin()
  56 partSet = model.moduleDocument()
  57 Part_1 = model.addPart(partSet)
  58 Part_1_doc = Part_1.document()
  59 model.addParameter(Part_1_doc, "ep_jupe", "0.188")
  60
  61 # time to build sketch
  62 sketchTime = timer()
  63
  64 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
  65 SketchLine_1 = Sketch_1.addLine(-6.376, 9.025, -6.376, -2.25)
  66 SketchLine_2 = Sketch_1.addLine(-6.376, -2.25, -6.538, -2.4)
  67 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  68 SketchLine_3 = Sketch_1.addLine(-6.538, -2.4, -6.538, -3.45)
  69 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  70 SketchLine_4 = Sketch_1.addLine(-6.538, -3.45, -7.782, -3.45)
  71 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  72 SketchLine_5 = Sketch_1.addLine(-7.782, -3.45, -7.782, -6.45)
  73 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  74 SketchLine_6 = Sketch_1.addLine(-7.782, -6.45, 0, -6.45)
  75 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  76 SketchLine_7 = Sketch_1.addLine(0, -6.45, 0, -3.45)
  77 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_7.startPoint())
  78 SketchLine_8 = Sketch_1.addLine(0, -3.45, -6.188, -3.45)
  79 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_7.endPoint(), SketchLine_8.startPoint())
  80 SketchLine_9 = Sketch_1.addLine(-6.188, -3.45, -6.188, 9.025)
  81 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  82 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_9.result())
  83 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_1.result())
  84 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_3.result())
  85 SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_5.result())
  86 SketchConstraintVertical_5 = Sketch_1.setVertical(SketchLine_7.result())
  87 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_4.result())
  88 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_8.result())
  89 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_6.result())
  90 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_4.result())
  91 SketchLine_10 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OZ"))
  92 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_8.startPoint(), SketchLine_10.result())
  93 SketchLine_11 = Sketch_1.addLine(-6.376, 9.025, -6.538, 9.187)
  94 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_11.startPoint())
  95 SketchLine_12 = Sketch_1.addLine(-6.538, 9.187, -6.538, 10.256)
  96 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_11.endPoint(), SketchLine_12.startPoint())
  97 SketchLine_13 = Sketch_1.addLine(-6.538, 10.256, -6.188, 10.256)
  98 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
  99 SketchLine_14 = Sketch_1.addLine(-6.188, 9.025, -6.084266646261868, 9.523738867722166)
 100 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_14.startPoint())
 101 SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_13.result())
 102 SketchConstraintVertical_6 = Sketch_1.setVertical(SketchLine_12.result())
 103 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_7.result(), 3)
 104 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_2.startPoint(), SketchLine_9.result(), "ep_jupe")
 105 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_4.startPoint(), SketchLine_9.result(), 0.35)
 106 SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_8.endPoint(), SketchLine_10.result(), 6.188)
 107 SketchLine_15 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OX"))
 108 SketchConstraintDistance_4 = Sketch_1.setDistance(SketchLine_1.startPoint(), SketchLine_15.result(), 9.025)
 109 SketchLine_16 = Sketch_1.addLine(-6.376, 9.025, -6.188, 9.025)
 110 SketchLine_16.setAuxiliary(True)
 111 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_16.startPoint())
 112 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_11.startPoint(), SketchLine_16.startPoint())
 113 SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_16.endPoint())
 114 SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_14.startPoint(), SketchLine_16.endPoint())
 115 SketchConstraintHorizontal_5 = Sketch_1.setHorizontal(SketchLine_16.result())
 116 SketchConstraintDistance_5 = Sketch_1.setDistance(SketchLine_2.startPoint(), SketchLine_15.result(), 2.25)
 117 SketchConstraintDistance_6 = Sketch_1.setDistance(SketchLine_3.startPoint(), SketchLine_15.result(), 2.4)
 118 SketchConstraintDistance_7 = Sketch_1.setDistance(SketchLine_4.startPoint(), SketchLine_15.result(), 3.45)
 119 SketchLine_17 = Sketch_1.addLine(-6.282, 9.025, -6.282, -4.050005366189866)
 120 SketchLine_17.setAuxiliary(True)
 121 SketchConstraintVertical_7 = Sketch_1.setVertical(SketchLine_17.result())
 122 SketchPoint_1 = Sketch_1.addPoint(-6.282, 9.025)
 123 SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchLine_17.startPoint(), SketchPoint_1.coordinates())
 124 SketchConstraintCoincidence_20 = Sketch_1.setCoincident(SketchPoint_1.coordinates(), SketchLine_16.result())
 125 SketchConstraintMiddle_1 = Sketch_1.setMiddlePoint(SketchPoint_1.coordinates(), SketchLine_16.result())
 126 SketchLine_18 = Sketch_1.addLine(-5.532, -4.050005366189866, -7.032, -4.050005366189866)
 127 SketchLine_19 = Sketch_1.addLine(-7.032, -4.050005366189866, -7.032, -5.850005366189865)
 128 SketchLine_20 = Sketch_1.addLine(-7.032, -5.850005366189865, -5.532, -5.850005366189865)
 129 SketchLine_21 = Sketch_1.addLine(-5.532, -5.850005366189865, -5.532, -4.050005366189866)
 130 SketchConstraintCoincidence_21 = Sketch_1.setCoincident(SketchLine_21.endPoint(), SketchLine_18.startPoint())
 131 SketchConstraintCoincidence_22 = Sketch_1.setCoincident(SketchLine_18.endPoint(), SketchLine_19.startPoint())
 132 SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchLine_19.endPoint(), SketchLine_20.startPoint())
 133 SketchConstraintCoincidence_24 = Sketch_1.setCoincident(SketchLine_20.endPoint(), SketchLine_21.startPoint())
 134 SketchConstraintHorizontal_6 = Sketch_1.setHorizontal(SketchLine_18.result())
 135 SketchConstraintVertical_8 = Sketch_1.setVertical(SketchLine_19.result())
 136 SketchConstraintHorizontal_7 = Sketch_1.setHorizontal(SketchLine_20.result())
 137 SketchConstraintVertical_9 = Sketch_1.setVertical(SketchLine_21.result())
 138 SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_20.result(), 1.5)
 139 SketchConstraintLength_3 = Sketch_1.setLength(SketchLine_19.result(), 1.8)
 140 SketchConstraintCoincidence_25 = Sketch_1.setCoincident(SketchLine_17.endPoint(), SketchLine_18.result())
 141 SketchConstraintMiddle_2 = Sketch_1.setMiddlePoint(SketchLine_18.result(), SketchLine_17.endPoint())
 142 SketchConstraintDistance_8 = Sketch_1.setDistance(SketchLine_17.endPoint(), SketchLine_5.result(), 1.5)
 143 SketchConstraintDistance_9 = Sketch_1.setDistance(SketchLine_11.endPoint(), SketchLine_17.result(), 0.256)
 144 SketchConstraintDistance_10 = Sketch_1.setDistance(SketchLine_11.endPoint(), SketchLine_15.result(), 9.187)
 145 SketchConstraintDistance_11 = Sketch_1.setDistance(SketchLine_12.endPoint(), SketchLine_15.result(), 10.256)
 146 SketchConstraintLength_4 = Sketch_1.setLength(SketchLine_13.result(), 0.35)
 147 SketchLine_22 = Sketch_1.addLine(-6.188, 10.256, -4.938, 10.97786688777511)
 148 SketchConstraintCoincidence_26 = Sketch_1.setCoincident(SketchLine_13.endPoint(), SketchLine_22.startPoint())
 149 SketchArc_1 = Sketch_1.addArc(-4.794548536090929, 9.26204592494933, -6.084266646261868, 9.523738867722166, -5.676829966640709, 10.23848613167324, True)
 150 SketchConstraintCoincidence_27 = Sketch_1.setCoincident(SketchLine_14.endPoint(), SketchArc_1.startPoint())
 151 SketchLine_23 = Sketch_1.addLine(-5.676829966640709, 10.23848613167324, -4.794548536090929, 9.26204592494933)
 152 SketchLine_23.setAuxiliary(True)
 153 SketchConstraintCoincidence_28 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_23.startPoint())
 154 SketchConstraintCoincidence_39 = Sketch_1.setCoincident(SketchLine_23.endPoint(), SketchArc_1.center())
 155 SketchArc_2 = Sketch_1.addArc(0, 2.425, -4.938, 10.97786688777511, 0, 12.301, True)
 156 SketchConstraintCoincidence_30 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_10.result())
 157 SketchConstraintCoincidence_31 = Sketch_1.setCoincident(SketchLine_22.endPoint(), SketchArc_2.startPoint())
 158 SketchConstraintCoincidence_32 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_10.result())
 159 SketchConstraintDistance_12 = Sketch_1.setDistance(SketchArc_2.center(), SketchLine_15.result(), 2.425)
 160 SketchLine_24 = Sketch_1.addLine(0, 12.301, 0, 12.137)
 161 SketchConstraintCoincidence_33 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_24.startPoint())
 162 SketchArc_3 = Sketch_1.addArc(0, 2.425, -5.877900790328188, 10.25907418263698, 2.067397663006541, 11.99831201324782, True)
 163 SketchArc_3.setName("SketchArc_4")
 164 SketchArc_3.result().setName("SketchArc_4")
 165 SketchArc_3.results()[1].setName("SketchArc_4_2")
 166 SketchArc_3.setAuxiliary(True)
 167 SketchConstraintCoincidence_34 = Sketch_1.setCoincident(SketchArc_2.center(), SketchArc_3.center())
 168 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_3.results()[1], 9.794)
 169 SketchPoint_2 = Sketch_1.addPoint(0, 12.219)
 170 SketchConstraintCoincidence_35 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchLine_24.result())
 171 SketchConstraintCoincidence_36 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchArc_3.results()[1])
 172 SketchConstraintMiddle_3 = Sketch_1.setMiddlePoint(SketchPoint_2.coordinates(), SketchLine_24.result())
 173 SketchLine_25 = Sketch_1.addLine(-5.676829966640709, 10.23848613167324, -5.417460848824602, 10.45671600291324)
 174 SketchConstraintCoincidence_37 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_25.startPoint())
 175 SketchConstraintCoincidence_38 = Sketch_1.setCoincident(SketchLine_23.startPoint(), SketchLine_25.startPoint())
 176 SketchLine_26 = Sketch_1.addLine(-5.417460848824602, 10.45671600291324, -5.143396378647499, 10.65615482129426)
 177 SketchConstraintCoincidence_39 = Sketch_1.setCoincident(SketchLine_25.endPoint(), SketchLine_26.startPoint())
 178 SketchLine_27 = Sketch_1.addLine(-5.143396378647499, 10.65615482129426, -4.856000000000008, 10.83583872155447)
 179 SketchConstraintCoincidence_40 = Sketch_1.setCoincident(SketchLine_26.endPoint(), SketchLine_27.startPoint())
 180 SketchArc_4 = Sketch_1.addArc(0, 2.425, -4.856, 10.83583872155447, 0, 12.137, True)
 181 SketchArc_4.setName("SketchArc_5")
 182 SketchArc_4.result().setName("SketchArc_5")
 183 SketchArc_4.results()[1].setName("SketchArc_5_2")
 184 SketchConstraintCoincidence_41 = Sketch_1.setCoincident(SketchArc_2.center(), SketchArc_4.center())
 185 SketchConstraintCoincidence_42 = Sketch_1.setCoincident(SketchArc_3.center(), SketchArc_4.center())
 186 SketchConstraintCoincidence_43 = Sketch_1.setCoincident(SketchLine_27.endPoint(), SketchArc_4.startPoint())
 187 SketchConstraintCoincidence_44 = Sketch_1.setCoincident(SketchLine_24.endPoint(), SketchArc_4.endPoint())
 188 SketchConstraintLength_5 = Sketch_1.setLength(SketchLine_24.result(), "0.082*2")
 189 SketchLine_28 = Sketch_1.addLine(-4.938, 10.97786688777511, 0, 2.425)
 190 SketchLine_28.setAuxiliary(True)
 191 SketchConstraintCoincidence_45 = Sketch_1.setCoincident(SketchLine_22.endPoint(), SketchLine_28.startPoint())
 192 SketchConstraintCoincidence_46 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_28.startPoint())
 193 SketchConstraintCoincidence_47 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_28.endPoint())
 194 SketchConstraintCoincidence_48 = Sketch_1.setCoincident(SketchArc_3.center(), SketchLine_28.endPoint())
 195 SketchConstraintCoincidence_49 = Sketch_1.setCoincident(SketchArc_4.center(), SketchLine_28.endPoint())
 196 SketchConstraintCoincidence_50 = Sketch_1.setCoincident(SketchLine_28.result(), SketchLine_27.endPoint())
 197 SketchConstraintAngle_1 = Sketch_1.setAngleBackward(SketchLine_28.result(), SketchLine_10.result(), 30)
 198 SketchLine_29 = Sketch_1.addLine(-5.143396378647499, 10.65615482129426, 0, 2.425)
 199 SketchLine_29.setAuxiliary(True)
 200 SketchConstraintCoincidence_51 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_29.endPoint())
 201 SketchConstraintCoincidence_52 = Sketch_1.setCoincident(SketchArc_3.center(), SketchLine_29.endPoint())
 202 SketchConstraintCoincidence_53 = Sketch_1.setCoincident(SketchArc_4.center(), SketchLine_29.endPoint())
 203 SketchConstraintCoincidence_54 = Sketch_1.setCoincident(SketchLine_28.endPoint(), SketchLine_29.endPoint())
 204 SketchConstraintCoincidence_55 = Sketch_1.setCoincident(SketchLine_26.endPoint(), SketchLine_29.startPoint())
 205 SketchConstraintAngle_2 = Sketch_1.setAngleBackward(SketchLine_29.result(), SketchLine_10.result(), 32)
 206 SketchLine_30 = Sketch_1.addLine(-5.417460848824602, 10.45671600291324, 0, 2.425)
 207 SketchLine_30.setAuxiliary(True)
 208 SketchConstraintCoincidence_56 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_30.endPoint())
 209 SketchConstraintCoincidence_57 = Sketch_1.setCoincident(SketchArc_3.center(), SketchLine_30.endPoint())
 210 SketchConstraintCoincidence_58 = Sketch_1.setCoincident(SketchArc_4.center(), SketchLine_30.endPoint())
 211 SketchConstraintCoincidence_59 = Sketch_1.setCoincident(SketchLine_28.endPoint(), SketchLine_30.endPoint())
 212 SketchConstraintCoincidence_60 = Sketch_1.setCoincident(SketchLine_29.endPoint(), SketchLine_30.endPoint())
 213 SketchConstraintCoincidence_61 = Sketch_1.setCoincident(SketchLine_25.endPoint(), SketchLine_30.startPoint())
 214 SketchConstraintAngle_3 = Sketch_1.setAngleBackward(SketchLine_30.result(), SketchLine_10.result(), 34)
 215 SketchLine_31 = Sketch_1.addLine(0, 2.425, -5.676829966640709, 10.23848613167324)
 216 SketchLine_31.setName("SketchLine_35")
 217 SketchLine_31.result().setName("SketchLine_35")
 218 SketchLine_31.setAuxiliary(True)
 219 SketchConstraintCoincidence_62 = Sketch_1.setCoincident(SketchArc_2.center(), SketchLine_31.startPoint())
 220 SketchConstraintCoincidence_63 = Sketch_1.setCoincident(SketchArc_3.center(), SketchLine_31.startPoint())
 221 SketchConstraintCoincidence_64 = Sketch_1.setCoincident(SketchArc_4.center(), SketchLine_31.startPoint())
 222 SketchConstraintCoincidence_65 = Sketch_1.setCoincident(SketchLine_28.endPoint(), SketchLine_31.startPoint())
 223 SketchConstraintCoincidence_66 = Sketch_1.setCoincident(SketchLine_29.endPoint(), SketchLine_31.startPoint())
 224 SketchConstraintCoincidence_67 = Sketch_1.setCoincident(SketchLine_30.endPoint(), SketchLine_31.startPoint())
 225 SketchConstraintCoincidence_68 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_31.endPoint())
 226 SketchConstraintAngle_4 = Sketch_1.setAngleBackward(SketchLine_31.result(), SketchLine_10.result(), 36)
 227 SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_1.results()[1], 1.316)
 228 SketchLine_32 = Sketch_1.addLine(-4.794548536090929, 9.26204592494933, -4.794548536090929, 9.764655753971969)
 229 SketchLine_32.setName("SketchLine_38")
 230 SketchLine_32.result().setName("SketchLine_38")
 231 SketchLine_32.setAuxiliary(True)
 232 SketchConstraintCoincidence_69 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_32.startPoint())
 233 SketchConstraintCoincidence_70 = Sketch_1.setCoincident(SketchLine_23.endPoint(), SketchLine_32.startPoint())
 234 SketchConstraintVertical_10 = Sketch_1.setVertical(SketchLine_32.result())
 235 SketchConstraintAngle_5 = Sketch_1.setAngleBackward(SketchLine_23.result(), SketchLine_32.result(), 42.1)
 236 SketchLine_33 = Sketch_1.addLine(-4.794548536090929, 9.26204592494933, -5.10267883886141, 9.26204592494933)
 237 SketchLine_33.setName("SketchLine_39")
 238 SketchLine_33.result().setName("SketchLine_39")
 239 SketchLine_33.setAuxiliary(True)
 240 SketchConstraintCoincidence_71 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_33.startPoint())
 241 SketchConstraintCoincidence_72 = Sketch_1.setCoincident(SketchLine_23.endPoint(), SketchLine_33.startPoint())
 242 SketchConstraintCoincidence_73 = Sketch_1.setCoincident(SketchLine_32.startPoint(), SketchLine_33.startPoint())
 243 SketchConstraintHorizontal_8 = Sketch_1.setHorizontal(SketchLine_33.result())
 244 SketchLine_34 = Sketch_1.addLine(-6.084266646261868, 9.523738867722166, -4.794548536090929, 9.26204592494933)
 245 SketchLine_34.setName("SketchLine_40")
 246 SketchLine_34.result().setName("SketchLine_40")
 247 SketchLine_34.setAuxiliary(True)
 248 SketchConstraintCoincidence_74 = Sketch_1.setCoincident(SketchLine_14.endPoint(), SketchLine_34.startPoint())
 249 SketchConstraintCoincidence_75 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_34.startPoint())
 250 SketchConstraintCoincidence_76 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_34.endPoint())
 251 SketchConstraintCoincidence_77 = Sketch_1.setCoincident(SketchLine_23.endPoint(), SketchLine_34.endPoint())
 252 SketchConstraintCoincidence_78 = Sketch_1.setCoincident(SketchLine_32.startPoint(), SketchLine_34.endPoint())
 253 SketchConstraintCoincidence_79 = Sketch_1.setCoincident(SketchLine_33.startPoint(), SketchLine_34.endPoint())
 254 SketchConstraintCoincidence_80 = Sketch_1.setCoincident(SketchArc_4.endPoint(), SketchLine_10.result())
 255 SketchConstraintAngle_6 = Sketch_1.setAngleBackward(SketchLine_33.result(), SketchLine_34.result(), 11.47)
 256 SketchLine_35 = Sketch_1.addLine(-5.676829966640709, 10.23848613167324, -5.756768760952487, 10.34851244290823)
 257 SketchLine_35.setName("SketchLine_36")
 258 SketchLine_35.result().setName("SketchLine_36")
 259 SketchLine_35.setAuxiliary(True)
 260 SketchConstraintCoincidence_81 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_35.startPoint())
 261 SketchConstraintCoincidence_82 = Sketch_1.setCoincident(SketchLine_23.startPoint(), SketchLine_35.startPoint())
 262 SketchConstraintCoincidence_83 = Sketch_1.setCoincident(SketchLine_25.startPoint(), SketchLine_35.startPoint())
 263 SketchConstraintCoincidence_84 = Sketch_1.setCoincident(SketchLine_31.endPoint(), SketchLine_35.startPoint())
 264 SketchConstraintCoincidence_85 = Sketch_1.setCoincident(SketchLine_35.endPoint(), SketchArc_3.results()[1])
 265 SketchLine_36 = Sketch_1.addLine(-5.417460848824602, 10.45671600291324, -5.476735296592498, 10.54459398560407)
 266 SketchLine_36.setName("SketchLine_37")
 267 SketchLine_36.result().setName("SketchLine_37")
 268 SketchLine_36.setAuxiliary(True)
 269 SketchConstraintCoincidence_86 = Sketch_1.setCoincident(SketchLine_25.endPoint(), SketchLine_36.startPoint())
 270 SketchConstraintCoincidence_87 = Sketch_1.setCoincident(SketchLine_26.startPoint(), SketchLine_36.startPoint())
 271 SketchConstraintCoincidence_88 = Sketch_1.setCoincident(SketchLine_30.startPoint(), SketchLine_36.startPoint())
 272 SketchConstraintCoincidence_89 = Sketch_1.setCoincident(SketchLine_36.endPoint(), SketchArc_3.results()[1])
 273 SketchLine_37 = Sketch_1.addLine(-5.143396378647499, 10.65615482129426, -5.190029273900022, 10.73078305375603)
 274 SketchLine_37.setName("SketchLine_41")
 275 SketchLine_37.result().setName("SketchLine_41")
 276 SketchLine_37.setAuxiliary(True)
 277 SketchConstraintCoincidence_90 = Sketch_1.setCoincident(SketchLine_26.endPoint(), SketchLine_37.startPoint())
 278 SketchConstraintCoincidence_91 = Sketch_1.setCoincident(SketchLine_27.startPoint(), SketchLine_37.startPoint())
 279 SketchConstraintCoincidence_92 = Sketch_1.setCoincident(SketchLine_29.startPoint(), SketchLine_37.startPoint())
 280 SketchConstraintCoincidence_93 = Sketch_1.setCoincident(SketchLine_37.endPoint(), SketchArc_3.results()[1])
 281 SketchConstraintParallel_1 = Sketch_1.setParallel(SketchLine_35.result(), SketchLine_31.result())
 282 SketchConstraintParallel_2 = Sketch_1.setParallel(SketchLine_36.result(), SketchLine_30.result())
 283 SketchConstraintParallel_3 = Sketch_1.setParallel(SketchLine_37.result(), SketchLine_29.result())
 284 SketchConstraintLength_6 = Sketch_1.setLength(SketchLine_35.result(), 0.136)
 285 SketchConstraintLength_7 = Sketch_1.setLength(SketchLine_36.result(), 0.106)
 286 SketchConstraintLength_8 = Sketch_1.setLength(SketchLine_37.result(), 0.088)
 287 model.do()
 288
 289 sketchTime = timer() - sketchTime
 290 print("Sketch creation time: {0}".format(sketchTime))
 291 expectedTime = MOVE_BUILD_RATIO * sketchTime
 292 averageTime = 0
 293 nbMoves = 0
 294
 295 #=========================================================================
 296 # Move point under the Middle point constraint and check execution time.
 297 # This point is fully constrained, so its coordinates should not be changed.
 298 #=========================================================================
 299 aPoint = SketchPoint_1.coordinates()
 300 X = aPoint.x()
 301 Y = aPoint.y()
 302 deltas = [(0.0, 0.1), (0.1, 0.0), (-0.1, 0.1), (1.0, 0.0), (0.0, -1.0), (-0.5, -0.2), (-0.3, 0.3)]
 303 for deltaX, deltaY in deltas:
 304     movementTime = timer()
 305     aPoint.setValue(X, Y + 0.1)
 306     model.do()
 307     movementTime = timer() - movementTime
 308     assert movementTime < expectedTime, "Time to move point {0} is greater than expected {1}".format(movementTime, expectedTime)
 309     assert math.fabs(aPoint.x() - X) < TOLERANCE and math.fabs(aPoint.y() - Y) < TOLERANCE, "({0}, {1}) != ({2}, {3})".format(aPoint.x(), aPoint.y(), X, Y)
 310     averageTime += movementTime
 311     nbMoves += 1
 312 print("Movement average time: {0}".format(averageTime / nbMoves))
 313
 314 #=========================================================================
 315 # Change value of SketchConstraintAngle_6 and check execution time.
 316 # Check constrained objects are satisfy this constraint.
 317 # Check the middle point stays on its place.
 318 #=========================================================================
 319 averageTime = 0
 320 nbMoves = 0
 321 for ang in range(12, 30):
 322     movementTime = timer()
 323     SketchConstraintAngle_6.feature().real("AngleValue").setValue(ang)
 324     model.do()
 325     movementTime = timer() - movementTime
 326     assert movementTime < expectedTime, "Time to change angle {0} is greater than expected {1}".format(movementTime, expectedTime)
 327     curAngle = angle(SketchLine_33.startPoint(), SketchLine_33.endPoint(), SketchLine_34.endPoint(), SketchLine_34.startPoint())
 328     assert math.fabs(curAngle - ang) < TOLERANCE, "angle {0} != {1} expected".format(curAngle, ang)
 329     averageTime += movementTime
 330     nbMoves += 1
 331 print("Changing angle average time: {0}".format(averageTime / nbMoves))
 332
 333 model.end()
 334
 335
 336 assert(model.checkPythonDump())