src/SketchPlugin/Test/Test1963.py

   1 ## Copyright (C) 2018-20xx  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 """
  22     Test1963.py
  23     Test case for issue #1963 "Conflicting constraint wrongly raised"
  24 """
  25
  26 from salome.shaper import model
  27
  28 model.begin()
  29 partSet = model.moduleDocument()
  30 Part_1 = model.addPart(partSet)
  31 Part_1_doc = Part_1.document()
  32 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
  33 SketchLine_1 = Sketch_1.addLine(6.188, 9.263, 6.188, -3.45)
  34 SketchLine_2 = Sketch_1.addLine(6.188, -3.45, 0, -3.45)
  35 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchLine_2.startPoint())
  36 SketchLine_3 = Sketch_1.addLine(0, -3.45, 0, -6.45)
  37 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
  38 SketchLine_4 = Sketch_1.addLine(0, -6.45, 10.31630157312683, -6.45)
  39 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
  40 SketchLine_5 = Sketch_1.addLine(10.31630157312683, -6.45, 10.31630157312683, -3.45)
  41 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
  42 SketchLine_6 = Sketch_1.addLine(10.31630157312683, -3.45, 6.538, -3.45)
  43 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
  44 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_1.result())
  45 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_2.result())
  46 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_6.result())
  47 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_4.result())
  48 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_5.result())
  49 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_3.result())
  50 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_2.result())
  51 SketchLine_7 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OZ"))
  52 SketchLine_7.setName("SketchLine_8")
  53 SketchLine_7.result().setName("SketchLine_8")
  54 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchLine_7.result())
  55 SketchLine_8 = Sketch_1.addLine(6.188, 9.263, 6.376, 9.263)
  56 SketchLine_8.setName("SketchLine_9")
  57 SketchLine_8.result().setName("SketchLine_9")
  58 SketchLine_8.setAuxiliary(True)
  59 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchLine_8.startPoint())
  60 SketchConstraintHorizontal_4 = Sketch_1.setHorizontal(SketchLine_8.result())
  61 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchLine_7.startPoint(), SketchLine_1.result(), 6.188)
  62 SketchLine_9 = Sketch_1.addLine(6.376, 9.263, 6.376, -2.284019283906062)
  63 SketchLine_9.setName("SketchLine_10")
  64 SketchLine_9.result().setName("SketchLine_10")
  65 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchLine_9.startPoint())
  66 SketchLine_10 = Sketch_1.addLine(6.376, -2.284019283906062, 6.538, -2.359739840005481)
  67 SketchLine_10.setName("SketchLine_11")
  68 SketchLine_10.result().setName("SketchLine_11")
  69 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchLine_10.startPoint())
  70 SketchLine_11 = Sketch_1.addLine(6.538, -2.359739840005481, 6.538, -3.45)
  71 SketchLine_11.setName("SketchLine_12")
  72 SketchLine_11.result().setName("SketchLine_12")
  73 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchLine_10.endPoint(), SketchLine_11.startPoint())
  74 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchLine_11.endPoint())
  75 SketchConstraintVertical_4 = Sketch_1.setVertical(SketchLine_9.result())
  76 SketchConstraintVertical_5 = Sketch_1.setVertical(SketchLine_11.result())
  77 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchLine_1.startPoint(), SketchLine_9.result(), 0.188)
  78 SketchConstraintDistance_3 = Sketch_1.setDistance(SketchLine_1.result(), SketchLine_11.endPoint(), 0.35)
  79 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_3.result(), 3)
  80 SketchConstraintDistance_4 = Sketch_1.setDistance(SketchLine_7.startPoint(), SketchLine_2.result(), 3.45)
  81 SketchLine_12 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OX"))
  82 SketchLine_12.setName("SketchLine_13")
  83 SketchLine_12.result().setName("SketchLine_13")
  84 SketchConstraintDistance_5 = Sketch_1.setDistance(SketchLine_1.startPoint(), SketchLine_12.result(), 9.263)
  85 SketchLine_13 = Sketch_1.addLine(7.131011037651645, -4.08833050970321, 5.469691015801997, -4.08833050970321)
  86 SketchLine_13.setName("SketchLine_14")
  87 SketchLine_13.result().setName("SketchLine_14")
  88 SketchLine_14 = Sketch_1.addLine(5.469691015801997, -4.08833050970321, 5.469691015801997, -5.799435189085778)
  89 SketchLine_14.setName("SketchLine_15")
  90 SketchLine_14.result().setName("SketchLine_15")
  91 SketchLine_15 = Sketch_1.addLine(5.469691015801997, -5.799435189085778, 7.131011037651645, -5.799435189085778)
  92 SketchLine_15.setName("SketchLine_16")
  93 SketchLine_15.result().setName("SketchLine_16")
  94 SketchLine_16 = Sketch_1.addLine(7.131011037651645, -5.799435189085778, 7.131011037651645, -4.08833050970321)
  95 SketchLine_16.setName("SketchLine_17")
  96 SketchLine_16.result().setName("SketchLine_17")
  97 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_16.endPoint(), SketchLine_13.startPoint())
  98 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_13.endPoint(), SketchLine_14.startPoint())
  99 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
 100 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint())
 101 SketchConstraintHorizontal_5 = Sketch_1.setHorizontal(SketchLine_13.result())
 102 SketchConstraintVertical_6 = Sketch_1.setVertical(SketchLine_14.result())
 103 SketchConstraintHorizontal_6 = Sketch_1.setHorizontal(SketchLine_15.result())
 104 SketchConstraintVertical_7 = Sketch_1.setVertical(SketchLine_16.result())
 105 SketchLine_17 = Sketch_1.addLine(6.282, 9.263, 6.282, -4.088330509703209)
 106 SketchLine_17.setName("SketchLine_18")
 107 SketchLine_17.result().setName("SketchLine_18")
 108 SketchLine_17.setAuxiliary(True)
 109 SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchLine_17.startPoint(), SketchLine_8.result())
 110 SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_17.endPoint(), SketchLine_13.result())
 111 SketchConstraintVertical_8 = Sketch_1.setVertical(SketchLine_17.result())
 112 SketchConstraintMiddle_1 = Sketch_1.setMiddlePoint(SketchLine_17.startPoint(), SketchLine_8.result())
 113 model.do()
 114
 115 # check sketch is correct
 116 assert(Sketch_1.solverError().value() == "")
 117
 118 SketchConstraintMiddle_2 = Sketch_1.setMiddlePoint(SketchLine_17.endPoint(), SketchLine_13.result())
 119 SketchConstraintDistance_6 = Sketch_1.setDistance(SketchLine_17.endPoint(), SketchLine_5.result(), 1.5, True)
 120 model.do()
 121
 122 # check sketch is still correct
 123 assert(Sketch_1.solverError().value() == "")
 124
 125 model.end()