src/SketchPlugin/Test/Test1779.py

   1 ## Copyright (C) 2018-20xx  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 """
  22     Test1779.py
  23     Test case for issue #1779 "Wrong ExtrusionCut result after loading dump"
  24 """
  25
  26 from salome.shaper import model
  27 from SketchAPI import *
  28 from ModelAPI import *
  29
  30 model.begin()
  31 partSet = model.moduleDocument()
  32 Part_1 = model.addPart(partSet)
  33 Part_1_doc = Part_1.document()
  34 model.addParameter(Part_1_doc, "width_hole", "24.5")
  35 ParamH = model.addParameter(Part_1_doc, "height", "6.5")
  36 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  37 SketchLine_1 = Sketch_1.addLine(-22.07107063584519, -12.07106498788576, -38.67766953846773, 4.535533914736781)
  38 SketchLine_1.setName("SketchLine_13")
  39 SketchLine_1.result().setName("SketchLine_13")
  40 SketchLine_2 = Sketch_1.addLine(-46.85786524463795, 6.000000076973941, -42.21320335935584, 6.000000076973941)
  41 SketchLine_2.setName("SketchLine_14")
  42 SketchLine_2.result().setName("SketchLine_14")
  43 SketchLine_3 = Sketch_1.addLine(-5, -5, -5, 26)
  44 SketchLine_3.setName("SketchLine_2")
  45 SketchLine_3.result().setName("SketchLine_2")
  46 SketchArc_1 = Sketch_1.addArc(-15, -5, -5, -5, -22.07107063584519, -12.07106498788576, True)
  47 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchArc_1.startPoint())
  48 SketchConstraintCoincidence_1.setName("SketchConstraintCoincidence_3")
  49 SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_3.result())
  50 SketchArc_2 = Sketch_1.addArc(-49.99999999999999, 6.483314850521824, -67.33333268454413, -3.4944393079507, -62.30717627979378, 22.24825735019753, True)
  51 SketchLine_4 = Sketch_1.addLine(-62.30717627979378, 22.24825735019753, -37.30717688933122, 41.76494210080364)
  52 SketchLine_4.setName("SketchLine_5")
  53 SketchLine_4.result().setName("SketchLine_5")
  54 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_4.startPoint())
  55 SketchConstraintCoincidence_2.setName("SketchConstraintCoincidence_8")
  56 SketchArc_3 = Sketch_1.addArc(-25, 26.00000007697395, -37.30717688933122, 41.76494210080364, -5, 26, True)
  57 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchArc_3.startPoint())
  58 SketchConstraintCoincidence_3.setName("SketchConstraintCoincidence_9")
  59 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchLine_3.endPoint(), SketchArc_3.endPoint())
  60 SketchConstraintCoincidence_4.setName("SketchConstraintCoincidence_10")
  61 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_3.results()[1], 20)
  62 SketchConstraintRadius_1.setName("SketchConstraintRadius_2")
  63 SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_3.result(), 31)
  64 SketchCircle_1 = Sketch_1.addCircle(-25, 26.00000007697395, 10)
  65 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_3.center(), SketchCircle_1.center())
  66 SketchConstraintCoincidence_5.setName("SketchConstraintCoincidence_11")
  67 SketchLine_5 = Sketch_1.addLine(-25, 26.00000007697395, -9.394737677428997, 26.00000007697395)
  68 SketchLine_5.setName("SketchLine_6")
  69 SketchLine_5.result().setName("SketchLine_6")
  70 SketchLine_5.setAuxiliary(True)
  71 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchArc_3.center(), SketchLine_5.startPoint())
  72 SketchConstraintCoincidence_6.setName("SketchConstraintCoincidence_12")
  73 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchCircle_1.center(), SketchLine_5.startPoint())
  74 SketchConstraintCoincidence_7.setName("SketchConstraintCoincidence_13")
  75 SketchConstraintHorizontal_1 = Sketch_1.setHorizontal(SketchLine_5.result())
  76 SketchConstraintHorizontal_1.setName("SketchConstraintHorizontal_2")
  77 SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_1.results()[1], 10)
  78 SketchConstraintRadius_2.setName("SketchConstraintRadius_3")
  79 SketchCircle_2 = Sketch_1.addCircle(-18, 1.000000076973949, 6.5)
  80 SketchLine_6 = Sketch_1.addLine(-15, -5, -5, -5)
  81 SketchLine_6.setName("SketchLine_7")
  82 SketchLine_6.result().setName("SketchLine_7")
  83 SketchLine_6.setAuxiliary(True)
  84 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_6.startPoint())
  85 SketchConstraintCoincidence_8.setName("SketchConstraintCoincidence_14")
  86 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchLine_6.endPoint())
  87 SketchConstraintCoincidence_9.setName("SketchConstraintCoincidence_15")
  88 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_6.endPoint())
  89 SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_16")
  90 SketchConstraintHorizontal_2 = Sketch_1.setHorizontal(SketchLine_6.result())
  91 SketchConstraintHorizontal_2.setName("SketchConstraintHorizontal_3")
  92 SketchLine_7 = Sketch_1.addLine(-25, 26.00000007697395, -25, 49.221836288079)
  93 SketchLine_7.setName("SketchLine_8")
  94 SketchLine_7.result().setName("SketchLine_8")
  95 SketchLine_7.setAuxiliary(True)
  96 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchArc_3.center(), SketchLine_7.startPoint())
  97 SketchConstraintCoincidence_11.setName("SketchConstraintCoincidence_17")
  98 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchCircle_1.center(), SketchLine_7.startPoint())
  99 SketchConstraintCoincidence_12.setName("SketchConstraintCoincidence_18")
 100 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchLine_5.startPoint(), SketchLine_7.startPoint())
 101 SketchConstraintCoincidence_13.setName("SketchConstraintCoincidence_19")
 102 SketchConstraintVertical_2 = Sketch_1.setVertical(SketchLine_7.result())
 103 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchArc_2.center(), SketchLine_7.result(), 25)
 104 SketchCircle_3 = Sketch_1.addCircle(-43.99999999999999, 21.00000007697395, 6.5)
 105 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchCircle_3.center(), SketchLine_7.result(), 19)
 106 SketchConstraintDistance_3 = Sketch_1.setDistance(SketchCircle_2.center(), SketchLine_5.result(), 25)
 107 SketchConstraintDistance_3.setName("SketchConstraintDistance_4")
 108 SketchConstraintDistance_4 = Sketch_1.setDistance(SketchCircle_2.center(), SketchLine_7.result(), 7)
 109 SketchConstraintDistance_4.setName("SketchConstraintDistance_5")
 110 SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_3.results()[1], SketchLine_3.result())
 111 SketchConstraintTangent_1.setName("SketchConstraintTangent_2")
 112 SketchConstraintTangent_2 = Sketch_1.setTangent(SketchLine_4.result(), SketchArc_3.results()[1])
 113 SketchConstraintTangent_2.setName("SketchConstraintTangent_3")
 114 SketchConstraintTangent_3 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchLine_4.result())
 115 SketchConstraintTangent_3.setName("SketchConstraintTangent_4")
 116 SketchLine_8 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OY"))
 117 SketchLine_8.setName("SketchLine_9")
 118 SketchLine_8.result().setName("SketchLine_9")
 119 SketchConstraintDistance_5 = Sketch_1.setDistance(SketchArc_1.startPoint(), SketchLine_8.result(), 5)
 120 SketchConstraintDistance_5.setName("SketchConstraintDistance_8")
 121 SketchLine_9 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OX"))
 122 SketchLine_9.setName("SketchLine_10")
 123 SketchLine_9.result().setName("SketchLine_10")
 124 SketchConstraintDistance_6 = Sketch_1.setDistance(SketchArc_1.startPoint(), SketchLine_9.result(), 5)
 125 SketchConstraintDistance_6.setName("SketchConstraintDistance_9")
 126 SketchPoint_1 = Sketch_1.addPoint(-59.46448692526128, -4.535554660152811)
 127 SketchArc_4 = Sketch_1.addArc(-63, -0.9999999230260515, -67.33333268454413, -3.4944393079507, -59.46448692526128, -4.535554660152811, False)
 128 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchArc_4.startPoint())
 129 SketchConstraintCoincidence_14.setName("SketchConstraintCoincidence_21")
 130 SketchConstraintRadius_3 = Sketch_1.setRadius(SketchArc_4.results()[1], 5)
 131 SketchConstraintRadius_3.setName("SketchConstraintRadius_4")
 132 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchArc_4.endPoint(), SketchPoint_1.coordinates())
 133 SketchConstraintCoincidence_15.setName("SketchConstraintCoincidence_22")
 134 SketchConstraintRadius_4 = Sketch_1.setRadius(SketchCircle_2.results()[1], 6.5)
 135 SketchConstraintRadius_4.setName("SketchConstraintRadius_5")
 136 SketchConstraintRadius_5 = Sketch_1.setRadius(SketchCircle_1.results()[1], 10)
 137 SketchConstraintRadius_5.setName("SketchConstraintRadius_6")
 138 SketchConstraintEqual_1 = Sketch_1.setEqual(SketchCircle_3.results()[1], SketchCircle_2.results()[1])
 139 SketchArc_5 = Sketch_1.addArc(-42.21320351257037, 1.000000076973942, -38.67766953846773, 4.535533914736781, -42.21320335935584, 6.000000076973941, False)
 140 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchArc_5.startPoint(), SketchLine_1.endPoint())
 141 SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_27")
 142 SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchArc_5.endPoint(), SketchLine_2.endPoint())
 143 SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_28")
 144 SketchConstraintTangent_4 = Sketch_1.setTangent(SketchArc_5.results()[1], SketchLine_1.result())
 145 SketchConstraintTangent_4.setName("SketchConstraintTangent_7")
 146 SketchConstraintTangent_5 = Sketch_1.setTangent(SketchArc_5.results()[1], SketchLine_2.result())
 147 SketchConstraintTangent_5.setName("SketchConstraintTangent_8")
 148 SketchConstraintRadius_6 = Sketch_1.setRadius(SketchArc_5.results()[1], 5)
 149 SketchConstraintRadius_6.setName("SketchConstraintRadius_7")
 150 SketchPoint_2 = Sketch_1.addPoint(-46.85786524463795, 6.000000076973941)
 151 SketchPoint_2.setName("SketchPoint_3")
 152 SketchPoint_2.result().setName("SketchPoint_3")
 153 SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchLine_2.startPoint())
 154 SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_38")
 155 SketchLine_10 = Sketch_1.addLine(-46.85786524463795, 6.000000076973941, -46.85786524463795, -6.278575593100925)
 156 SketchLine_10.setName("SketchLine_22")
 157 SketchLine_10.result().setName("SketchLine_22")
 158 SketchLine_10.setAuxiliary(True)
 159 SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchLine_2.startPoint(), SketchLine_10.startPoint())
 160 SketchConstraintCoincidence_19.setName("SketchConstraintCoincidence_40")
 161 SketchConstraintCoincidence_20 = Sketch_1.setCoincident(SketchPoint_2.coordinates(), SketchLine_10.startPoint())
 162 SketchConstraintCoincidence_20.setName("SketchConstraintCoincidence_41")
 163 SketchConstraintVertical_3 = Sketch_1.setVertical(SketchLine_10.result())
 164 SketchConstraintVertical_3.setName("SketchConstraintVertical_5")
 165 SketchConstraintHorizontal_3 = Sketch_1.setHorizontal(SketchLine_2.result())
 166 SketchConstraintHorizontal_3.setName("SketchConstraintHorizontal_8")
 167 SketchArc_6 = Sketch_1.addArc(SketchLine_2.startPoint(), -50.3933775416084, 4.535554723500073, False)
 168 model.do()
 169 SketchArc_6 = SketchAPI_Arc(model.lastSubFeature(featureToCompositeFeature(Sketch_1.feature()), "SketchArc"))
 170 SketchLine_11 = Sketch_1.addLine(-50.3933775416084, 4.535554723500073, -59.46448692526128, -4.535554660152811)
 171 SketchLine_11.setName("SketchLine_21")
 172 SketchLine_11.result().setName("SketchLine_21")
 173 SketchConstraintCoincidence_22 = Sketch_1.setCoincident(SketchLine_11.startPoint(), SketchArc_6.endPoint())
 174 SketchConstraintCoincidence_22.setName("SketchConstraintCoincidence_30")
 175 SketchConstraintTangent_7 = Sketch_1.setTangent(SketchArc_6.results()[1], SketchLine_11.result())
 176 SketchConstraintTangent_7.setName("SketchConstraintTangent_10")
 177 SketchConstraintRadius_7 = Sketch_1.setRadius(SketchArc_6.results()[1], 5)
 178 SketchConstraintRadius_7.setName("SketchConstraintRadius_8")
 179 SketchConstraintDistance_7 = Sketch_1.setDistance(SketchArc_3.center(), SketchLine_2.result(), 20)
 180 SketchConstraintDistance_7.setName("SketchConstraintDistance_10")
 181 SketchConstraintDistance_8 = Sketch_1.setDistance(SketchArc_4.center(), SketchLine_5.result(), 27)
 182 SketchConstraintDistance_8.setName("SketchConstraintDistance_12")
 183 SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchArc_4.endPoint(), SketchLine_11.endPoint())
 184 SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_31")
 185 SketchConstraintDistance_9 = Sketch_1.setDistance(SketchArc_4.center(), SketchLine_7.result(), 38)
 186 SketchConstraintDistance_9.setName("SketchConstraintDistance_13")
 187 SketchConstraintDistance_10 = Sketch_1.setDistance(SketchCircle_3.center(), SketchLine_5.result(), 5)
 188 SketchConstraintDistance_10.setName("SketchConstraintDistance_14")
 189 SketchConstraintTangent_8 = Sketch_1.setTangent(SketchArc_4.results()[1], SketchLine_11.result())
 190 SketchConstraintTangent_8.setName("SketchConstraintTangent_11")
 191 SketchConstraintTangent_9 = Sketch_1.setTangent(SketchArc_2.results()[1], SketchArc_4.results()[1])
 192 SketchConstraintTangent_9.setName("SketchConstraintTangent_12")
 193 SketchConstraintRadius_8 = Sketch_1.setRadius(SketchArc_2.results()[1], 20)
 194 SketchConstraintRadius_8.setName("SketchConstraintRadius_9")
 195 SketchCircle_4 = Sketch_1.addCircle(-58.99999999999999, 10.00000007697395, 6.5)
 196 SketchConstraintDistance_11 = Sketch_1.setDistance(SketchCircle_4.center(), SketchLine_7.result(), 34)
 197 SketchConstraintDistance_11.setName("SketchConstraintDistance_15")
 198 SketchConstraintDistance_12 = Sketch_1.setDistance(SketchCircle_4.center(), SketchLine_5.result(), 16)
 199 SketchConstraintDistance_12.setName("SketchConstraintDistance_16")
 200 SketchConstraintEqual_2 = Sketch_1.setEqual(SketchCircle_2.results()[1], SketchCircle_4.results()[1])
 201 SketchConstraintCoincidence_24 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchArc_1.endPoint())
 202 SketchConstraintCoincidence_24.setName("SketchConstraintCoincidence_32")
 203 SketchConstraintAngle_1 = Sketch_1.setAngleBackward(SketchLine_1.result(), SketchLine_2.result(), 135)
 204 SketchConstraintTangent_10 = Sketch_1.setTangent(SketchLine_1.result(), SketchArc_1.results()[1])
 205 SketchConstraintTangent_10.setName("SketchConstraintTangent_13")
 206 SketchConstraintAngle_2 = Sketch_1.setAngle(SketchLine_11.result(), SketchLine_10.result(), 45)
 207 model.do()
 208 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_13r-SketchLine_14f-SketchLine_2f-SketchArc_1_2f-SketchArc_2_2f-SketchLine_5r-SketchArc_3_2f-SketchCircle_1_2r-SketchCircle_2_2r-SketchCircle_3_2r-SketchArc_4_2f-SketchArc_5_2r-SketchArc_6_2r-SketchLine_21r-SketchCircle_4_2r")], model.selection(), "height", 0)
 209 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_14"))
 210 SketchLine_12 = Sketch_2.addLine(38.24999999999999, 6.5, 13.75, 6.5)
 211 SketchLine_13 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_14&Extrusion_1_1/To_Face_1"))
 212 SketchLine_13.setName("SketchLine_15")
 213 SketchLine_13.result().setName("SketchLine_15")
 214 SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_13.result())
 215 SketchLine_14 = Sketch_2.addLine(13.75, 6.5, 13.75, 4.5)
 216 SketchLine_14.setName("SketchLine_16")
 217 SketchLine_14.result().setName("SketchLine_16")
 218 SketchLine_15 = Sketch_2.addLine(13.75, 4.5, 38.24999999999999, 4.5)
 219 SketchLine_15.setName("SketchLine_17")
 220 SketchLine_15.result().setName("SketchLine_17")
 221 SketchLine_16 = Sketch_2.addLine(38.24999999999999, 4.5, 38.24999999999999, 6.5)
 222 SketchLine_16.setName("SketchLine_18")
 223 SketchLine_16.result().setName("SketchLine_18")
 224 SketchConstraintCoincidence_26 = Sketch_2.setCoincident(SketchLine_16.endPoint(), SketchLine_12.startPoint())
 225 SketchConstraintCoincidence_27 = Sketch_2.setCoincident(SketchLine_12.endPoint(), SketchLine_14.startPoint())
 226 SketchConstraintCoincidence_27.setName("SketchConstraintCoincidence_33")
 227 SketchConstraintCoincidence_28 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchLine_15.startPoint())
 228 SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_34")
 229 SketchConstraintCoincidence_29 = Sketch_2.setCoincident(SketchLine_15.endPoint(), SketchLine_16.startPoint())
 230 SketchConstraintCoincidence_29.setName("SketchConstraintCoincidence_35")
 231 SketchConstraintHorizontal_4 = Sketch_2.setHorizontal(SketchLine_12.result())
 232 SketchConstraintVertical_4 = Sketch_2.setVertical(SketchLine_14.result())
 233 SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_15.result())
 234 SketchConstraintVertical_5 = Sketch_2.setVertical(SketchLine_16.result())
 235 SketchConstraintVertical_5.setName("SketchConstraintVertical_6")
 236 SketchConstraintLength_2 = Sketch_2.setLength(SketchLine_14.result(), 2)
 237 SketchConstraintLength_3 = Sketch_2.setLength(SketchLine_12.result(), "width_hole")
 238 SketchConstraintDistance_13 = Sketch_2.setDistance(SketchLine_13.endPoint(), SketchLine_16.result(), "width_hole/2")
 239 SketchConstraintDistance_13.setName("SketchConstraintDistance_17")
 240 model.do()
 241 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_12f-SketchLine_16f-SketchLine_17f-SketchLine_18f")], model.selection(), 0, 100, [model.selection("SOLID", "Extrusion_1_1")])
 242 model.do()
 243
 244 # check ExtrusionCut_1 is valid
 245 assert(ExtrusionCut_1.feature().error() == "")
 246
 247 # change parameter and check validity again
 248 ParamH.setValue(10)
 249 model.do()
 250 assert(ExtrusionCut_1.feature().error() == "")
 251
 252 # revert parameter
 253 ParamH.setValue(6.5)
 254 model.do()
 255 assert(ExtrusionCut_1.feature().error() == "")
 256
 257 model.end()