src/SketchPlugin/Test/Test1578.py

   1 ## Copyright (C) 2018-20xx  CEA/DEN, EDF R&D
   2 ##
   3 ## This library is free software; you can redistribute it and/or
   4 ## modify it under the terms of the GNU Lesser General Public
   5 ## License as published by the Free Software Foundation; either
   6 ## version 2.1 of the License, or (at your option) any later version.
   7 ##
   8 ## This library is distributed in the hope that it will be useful,
   9 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  11 ## Lesser General Public License for more details.
  12 ##
  13 ## You should have received a copy of the GNU Lesser General Public
  14 ## License along with this library; if not, write to the Free Software
  15 ## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  16 ##
  17 ## See http:##www.salome-platform.org/ or
  18 ## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
  19 ##
  20
  21 """
  22     Test1578.py
  23     Test case for issue #1578 "arc problems"
  24 """
  25
  26 from salome.shaper import model
  27
  28 model.begin()
  29 partSet = model.moduleDocument()
  30 model.addParameter(partSet, "R_stator_int", "75")
  31 model.addParameter(partSet, "R_stator_ext", "120")
  32 model.addParameter(partSet, "angle", "7.5")
  33 model.addParameter(partSet, "Length_1", "1.6")
  34 model.addParameter(partSet, "Length_2", "2.29")
  35 model.addParameter(partSet, "Length_3", "3.5")
  36 model.addParameter(partSet, "h", "1.3")
  37 model.addParameter(partSet, "h1", "1.9")
  38 model.addParameter(partSet, "h2", "15.49")
  39 model.addParameter(partSet, "R_rotor", "67.5")
  40 model.addParameter(partSet, "R_abre", "29.5")
  41 model.addParameter(partSet, "l_aimant", "37.5")
  42 model.addParameter(partSet, "h_aimant", "64")
  43 model.addParameter(partSet, "R_aimant", "70.5")
  44 model.addParameter(partSet, "l_cut_rotor", "37.92")
  45 model.addParameter(partSet, "h_cut_rotor", "63.8")
  46 model.addParameter(partSet, "R_interm", "72.75")
  47 model.addParameter(partSet, "angle_aimant", "22.5")
  48 Part_1 = model.addPart(partSet)
  49 Part_1_doc = Part_1.document()
  50 Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
  51 SketchLine_1 = Sketch_1.addLine(0, 0, 115.7437109013936, 7.586243611563176)
  52 SketchLine_1.setAuxiliary(True)
  53 SketchPoint_1 = Sketch_1.addPoint(model.selection("VERTEX", "PartSet/Origin"))
  54 SketchConstraintCoincidence_1 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchPoint_1.result())
  55 SketchLine_2 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OX"))
  56 SketchConstraintAngle_1 = Sketch_1.setAngle(SketchLine_2.result(), SketchLine_1.result(), "angle/2")
  57 SketchLine_3 = Sketch_1.addLine(0, 0, 101.5823409704896, 13.37356889953941)
  58 SketchLine_3.setAuxiliary(True)
  59 SketchConstraintCoincidence_2 = Sketch_1.setCoincident(SketchLine_3.startPoint(), SketchPoint_1.result())
  60 SketchConstraintAngle_2 = Sketch_1.setAngle(SketchLine_2.result(), SketchLine_3.result(), "angle")
  61 SketchArc_1 = Sketch_1.addArc(0, 0, 75, 0, 74.35836460303578, 9.789464416503867, False)
  62 SketchConstraintCoincidence_3 = Sketch_1.setCoincident(SketchArc_1.center(), SketchPoint_1.result())
  63 SketchConstraintCoincidence_4 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_2.result())
  64 SketchConstraintCoincidence_5 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_3.result())
  65 SketchArc_2 = Sketch_1.addArc(0, 0, 120, 0, 118.9733833648573, 15.66314306640619, False)
  66 SketchConstraintCoincidence_6 = Sketch_1.setCoincident(SketchArc_2.center(), SketchPoint_1.result())
  67 SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_2.result())
  68 SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_3.result())
  69 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], "R_stator_int")
  70 SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_2.results()[1], "R_stator_ext")
  71 SketchLine_4 = Sketch_1.addLine(74.35836460303578, 9.789464416503867, 118.9733833648573, 15.66314306640619)
  72 SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_4.startPoint())
  73 SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_4.endPoint())
  74 SketchLine_5 = Sketch_1.addLine(75, 0, 120, 0)
  75 SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchArc_1.startPoint(), SketchLine_5.startPoint())
  76 SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchLine_5.endPoint())
  77 SketchArc_3 = Sketch_1.addArc(0, 0, 76.22453904297332, 3.392587167080116, 76.01524902943686, 6.585735721443648, False)
  78 SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchArc_3.center(), SketchPoint_1.result())
  79 SketchArc_4 = Sketch_1.addArc(0, 0, 78.14887552638105, 2.827234330967321, 77.84932919450701, 7.397428199400126, False)
  80 SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchArc_4.center(), SketchPoint_1.result())
  81 SketchArc_5 = Sketch_1.addArc(0, 0, 93.65305549448868, 2.630835712510912, 93.19523358987767, 9.615848175181137, False)
  82 SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchArc_5.center(), SketchPoint_1.result())
  83 SketchConstraintRadius_3 = Sketch_1.setRadius(SketchArc_3.results()[1], "R_stator_int+h")
  84 SketchConstraintRadius_4 = Sketch_1.setRadius(SketchArc_4.results()[1], "R_stator_int+h+h1")
  85 SketchConstraintRadius_5 = Sketch_1.setRadius(SketchArc_5.results()[1], "R_stator_int+h+h1+h2")
  86 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchArc_5.endPoint(), SketchLine_1.result(), "Length_3")
  87 SketchConstraintDistance_2 = Sketch_1.setDistance(SketchArc_5.startPoint(), SketchLine_1.result(), "Length_3")
  88 SketchConstraintDistance_3 = Sketch_1.setDistance(SketchArc_4.endPoint(), SketchLine_1.result(), "Length_2")
  89 SketchConstraintDistance_4 = Sketch_1.setDistance(SketchArc_4.startPoint(), SketchLine_1.result(), "Length_2")
  90 SketchConstraintDistance_5 = Sketch_1.setDistance(SketchArc_3.endPoint(), SketchLine_1.result(), "Length_1")
  91 SketchConstraintDistance_6 = Sketch_1.setDistance(SketchArc_3.startPoint(), SketchLine_1.result(), "Length_1")
  92 SketchLine_6 = Sketch_1.addLine(77.84932919450701, 7.397428199400126, 93.19523358987767, 9.615848175181137)
  93 SketchConstraintCoincidence_16 = Sketch_1.setCoincident(SketchArc_4.endPoint(), SketchLine_6.startPoint())
  94 SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchArc_5.endPoint(), SketchLine_6.endPoint())
  95 SketchLine_7 = Sketch_1.addLine(78.14887552638105, 2.827234330967321, 93.65305549448868, 2.630835712510912)
  96 SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchArc_4.startPoint(), SketchLine_7.startPoint())
  97 SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchArc_5.startPoint(), SketchLine_7.endPoint())
  98 SketchLine_8 = Sketch_1.addLine(76.01524902943686, 6.585735721443648, 74.71774217241287, 6.500692629007779)
  99 SketchConstraintCoincidence_20 = Sketch_1.setCoincident(SketchArc_3.endPoint(), SketchLine_8.startPoint())
 100 SketchConstraintCoincidence_21 = Sketch_1.setCoincident(SketchLine_8.endPoint(), SketchArc_1.results()[1])
 101 SketchLine_9 = Sketch_1.addLine(76.22453904297332, 3.392587167080116, 74.92703218594932, 3.307544074644247)
 102 SketchConstraintCoincidence_22 = Sketch_1.setCoincident(SketchArc_3.startPoint(), SketchLine_9.startPoint())
 103 SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchLine_9.endPoint(), SketchArc_1.results()[1])
 104 SketchConstraintParallel_1 = Sketch_1.setParallel(SketchLine_8.result(), SketchLine_1.result())
 105 SketchConstraintParallel_2 = Sketch_1.setParallel(SketchLine_9.result(), SketchLine_1.result())
 106 SketchArc_6 = Sketch_1.addArc(92.99435209423221, 6.095171858515482, 93.19523358987767, 9.615848175181137, 93.65305549448868, 2.630835712510912, True)
 107 SketchConstraintCoincidence_24 = Sketch_1.setCoincident(SketchArc_5.endPoint(), SketchArc_6.startPoint())
 108 SketchConstraintCoincidence_25 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchArc_6.startPoint())
 109 SketchConstraintCoincidence_26 = Sketch_1.setCoincident(SketchArc_5.startPoint(), SketchArc_6.endPoint())
 110 SketchArc_7 = Sketch_1.addArc(78.08372875230802, 4.389817544749706, 76.015249029437, 6.585735721444, 77.84932919450701, 7.397428199400126, True)
 111 SketchConstraintCoincidence_27 = Sketch_1.setCoincident(SketchArc_3.endPoint(), SketchArc_7.startPoint())
 112 SketchConstraintCoincidence_28 = Sketch_1.setCoincident(SketchLine_8.startPoint(), SketchArc_7.startPoint())
 113 SketchConstraintCoincidence_29 = Sketch_1.setCoincident(SketchArc_4.endPoint(), SketchArc_7.endPoint())
 114 SketchConstraintCoincidence_30 = Sketch_1.setCoincident(SketchLine_6.startPoint(), SketchArc_7.endPoint())
 115 SketchArc_8 = Sketch_1.addArc(77.98869779703921, 5.839709741271425, 76.22453904297301, 3.39258716708, 78.14887552638105, 2.827234330967321, False)
 116 SketchConstraintCoincidence_31 = Sketch_1.setCoincident(SketchArc_3.startPoint(), SketchArc_8.startPoint())
 117 SketchConstraintCoincidence_32 = Sketch_1.setCoincident(SketchLine_9.startPoint(), SketchArc_8.startPoint())
 118 SketchConstraintCoincidence_33 = Sketch_1.setCoincident(SketchArc_4.startPoint(), SketchArc_8.endPoint())
 119 SketchConstraintCoincidence_34 = Sketch_1.setCoincident(SketchLine_7.startPoint(), SketchArc_8.endPoint())
 120 SketchConstraintEqual_1 = Sketch_1.setEqual(SketchArc_7.results()[1], SketchArc_8.results()[1])
 121 SketchArc_9 = Sketch_1.addArc(0, 0, 78.14887552638101, 2.827234330967, 78.2, 0, True)
 122 SketchConstraintCoincidence_35 = Sketch_1.setCoincident(SketchArc_9.center(), SketchPoint_1.result())
 123 SketchConstraintCoincidence_36 = Sketch_1.setCoincident(SketchArc_4.startPoint(), SketchArc_9.startPoint())
 124 SketchConstraintCoincidence_37 = Sketch_1.setCoincident(SketchLine_7.startPoint(), SketchArc_9.startPoint())
 125 SketchConstraintCoincidence_38 = Sketch_1.setCoincident(SketchArc_8.endPoint(), SketchArc_9.startPoint())
 126 SketchConstraintCoincidence_39 = Sketch_1.setCoincident(SketchArc_9.endPoint(), SketchLine_5.result())
 127 model.do()
 128
 129 model.checkSketch(Sketch_1)
 130
 131 # Check sketch is valid after adding the arc
 132 SketchArc_10 = Sketch_1.addArc(0, 0, 77.84932919450699, 7.397428199400125, 77.5309881595101, 10.20714823162807, False)
 133 SketchConstraintCoincidence_40 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchArc_10.center())
 134 SketchConstraintCoincidence_41 = Sketch_1.setCoincident(SketchArc_4.endPoint(), SketchArc_10.startPoint())
 135 SketchConstraintCoincidence_42 = Sketch_1.setCoincident(SketchLine_4.result(), SketchArc_10.endPoint())
 136 model.do()
 137
 138 model.checkSketch(Sketch_1)
 139
 140 # Check sketch is valid after multi-rotation
 141 SketchMultiRotation_1_objects = [SketchArc_1.results()[1], SketchLine_9.result(), SketchLine_8.result(), SketchArc_3.results()[1], SketchArc_8.results()[1], SketchArc_7.results()[1], SketchArc_9.results()[1], SketchArc_4.results()[1], SketchArc_10.results()[1], SketchLine_4.result(), SketchLine_7.result(), SketchLine_6.result(), SketchArc_5.results()[1], SketchArc_6.results()[1], SketchArc_2.results()[1]]
 142 SketchMultiRotation_1 = Sketch_1.addRotation(SketchMultiRotation_1_objects, SketchLine_2.startPoint(), "angle", 12)
 143 model.do()
 144
 145 model.checkSketch(Sketch_1)
 146
 147 # Move arc's extremity and check sketch
 148 SketchArc_121 = Sketch_1.addArc(0, 0, 36.41124276672319, 6.344317038870018, 8.424960444516818, 35.98678924293296, False)
 149 SketchConstraintCoincidence_43 = Sketch_1.setCoincident(SketchLine_1.startPoint(), SketchArc_121.center())
 150 model.do()
 151
 152 for i in range(0, 10):
 153     Sketch_1.move(SketchArc_121.startPoint(), SketchArc_121.startPoint().x() + 1., SketchArc_121.startPoint().y())
 154     model.do()
 155     model.checkSketch(Sketch_1)
 156
 157 model.end()