1 <?xml version="1.0" encoding="utf-8"?>
3 <TS version="2.0" language="en_US">
7 <source>Model_FeatureValidator: Attribute "DirX" is not initialized.</source>
8 <translation>Select a plane for the sketch</translation>
11 <source>Model_FeatureValidator: Attribute "Features" is not initialized.</source>
12 <translation>Sketch objects are not defined</translation>
15 <source>External - GeomValidators_Face: The attribute with the %1 type is not processed</source>
16 <translation>Only attribute selection can be used for the sketch face, not %1</translation>
19 <source>External - GeomValidators_Face: The shape is not a face.</source>
20 <translation>Sketch can be created only on a face</translation>
23 <source>External - GeomValidators_Face: The shape is not a plane.</source>
24 <translation>Sketch can be created only on a planar face</translation>
27 <source>External - GeomValidators_Face: The shape is not a cylinder.</source>
28 <translation>Sketch can be created only on a cylindrical face</translation>
31 <source>External - GeomValidators_Face: The shape is not an available face.</source>
32 <translation>Sketch cannot be created on the selected face</translation>
35 <source>Model_FeatureValidator: Attribute "External" is not initialized.</source>
36 <translation>Select the sketch plane</translation>
39 <source>Model_FeatureValidator: Attribute "SolverDOF" is not initialized.</source>
40 <translation>Can not compute degrees of freedom</translation>
43 <source>Model_FeatureValidator: Attribute "SolverError" is not initialized.</source>
44 <translation>Can not compute the solver error</translation>
49 <name>SketchCircle</name>
51 <source>CircleRadius - GeomValidators_Positive: Double is not positive.</source>
52 <translation>Radius value is not positive</translation>
55 <source>Model_FeatureValidator: Attribute "CircleCenter" is not initialized.</source>
56 <translation>A center point is not selected</translation>
59 <source>Model_FeatureValidator: Attribute "FirstPoint" is not initialized.</source>
60 <translation>A first point is not selected</translation>
63 <source>Model_FeatureValidator: Attribute "SecondPoint" is not initialized.</source>
64 <translation>A second point is not selected</translation>
67 <source>Model_FeatureValidator: Attribute "ThirdPoint" is not initialized.</source>
68 <translation>A third point is not selected</translation>
71 <source>Attribute "CircleCenter" is locked by modification value in the viewer.</source>
72 <translation>Select a center point</translation>
75 <source>Attribute "CircleRadius" is locked by modification value in the viewer.</source>
76 <translation>Select a radius distance</translation>
79 <source>CircleRadius - GeomValidators_Positive: Integer is not initialized.</source>
80 <translation>Integer radius is not initialized</translation>
83 <source>CircleRadius - GeomValidators_Positive: Integer is not positive.</source>
84 <translation>Integer radius must be set</translation>
87 <source>Model_FeatureValidator: Attribute "CircleRadius" is not initialized.</source>
88 <translation>Set the circle radius</translation>
93 <name>SketchConstraintHorizontal</name>
95 <source>Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized.</source>
96 <translation>Line is not selected</translation>
99 <source>ModelAPI_StateInvalidArgument</source>
100 <translation>Wrong object is selected</translation>
103 <source>ConstraintEntityA - GeomValidators_ShapeType: The object is empty</source>
104 <translation>Line is not selected</translation>
107 <source>ConstraintEntityA - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
108 <translation>The constraint argument does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
111 <source>ConstraintEntityA - GeomValidators_ShapeType: It has reference to an empty attribute</source>
112 <translation>The constraint argument refers to nothing</translation>
115 <source>ConstraintEntityA - GeomValidators_ShapeType: Shape type is "%1", it should be "%2"</source>
116 <translation>The constraint argument refers to %1 but must be %2</translation>
119 <source>ConstraintEntityA - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
120 <translation>The constraint argument of type %1 is not supported</translation>
123 <source>ConstraintEntityA - GeomValidators_ShapeType: The result is empty</source>
124 <translation>The constraint argument refers to not existing item</translation>
127 <source>ConstraintEntityA - GeomValidators_ShapeType: The shape is empty</source>
128 <translation>The constraint argument refers to the empty shape</translation>
132 <name>SketchConstraintPerpendicular</name>
134 <source>Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized.</source>
135 <translation>First line is not selected</translation>
138 <source>Model_FeatureValidator: Attribute "ConstraintEntityB" is not initialized.</source>
139 <translation>Second line is not selected</translation>
142 <source>ConstraintEntityA - GeomValidators_ShapeType: The object is empty</source>
143 <translation>First line is not selected</translation>
146 <source>ConstraintEntityB - GeomValidators_ShapeType: The object is empty</source>
147 <translation>Second line is not selected</translation>
150 <source>ConstraintEntityB - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
151 <translation>The second line references to not acceptable shape type. The type should be: %1</translation>
154 <source>ConstraintEntityB - GeomValidators_ShapeType: It has reference to an empty attribute</source>
155 <translation>The second line refers to nothing</translation>
158 <source>ConstraintEntityB - GeomValidators_ShapeType: Shape type is "%1", it should be "%2"</source>
159 <translation>The second line refers to %1 but must be %2</translation>
162 <source>ConstraintEntityB - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
163 <translation>The second line of type %1 is not supported</translation>
166 <source>ConstraintEntityB - GeomValidators_ShapeType: The result is empty</source>
167 <translation>The second line refers to not existing item</translation>
170 <source>ConstraintEntityB - GeomValidators_ShapeType: The shape is empty</source>
171 <translation>The second line refers to the empty shape</translation>
174 <source>ConstraintEntityA - SketchPlugin_ExternalValidator: Both features, attribute and attribute in parameter, are external.</source>
175 <translation>Two external lines can not be constrained as perpendicular</translation>
178 <source>ConstraintEntityA - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
179 <translation>Shape type must be %1</translation>
182 <source>ConstraintEntityA - GeomValidators_ShapeType: It has reference to an empty attribute</source>
183 <translation>The first line refers to nothing</translation>
186 <source>ConstraintEntityA - GeomValidators_ShapeType: Shape type is "%1", it should be "%2"</source>
187 <translation>The first line shape type is "%1", it should be "%2"</translation>
190 <source>ConstraintEntityA - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
191 <translation>The attribute with the %1 type is not processed</translation>
194 <source>ConstraintEntityA - GeomValidators_ShapeType: The result is empty</source>
195 <translation>The constraint argument refers to not existing item</translation>
198 <source>ConstraintEntityA - GeomValidators_ShapeType: The shape is empty</source>
199 <translation>The constraint argument refers to the empty shape</translation>
202 <source>ConstraintEntityB - SketchPlugin_ExternalValidator: Both features, attribute and attribute in parameter, are external.</source>
203 <translation>Two external lines can not be constrained as perpendicular</translation>
208 <name>SketchConstraintRadius</name>
210 <source>Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized.</source>
211 <translation>Circle is not selected</translation>
214 <source>Attribute "ConstraintFlyoutValuePnt" is locked by modification value in the viewer.</source>
215 <translation>Flyout value point is not clicked in the viewer</translation>
218 <source>ConstraintEntityA - GeomValidators_ShapeType: The object is empty</source>
219 <translation>Object is not selected</translation>
222 <source>ConstraintValue - GeomValidators_Positive: Double is not initialized.</source>
223 <translation>Radius value is not positive</translation>
227 <source>ConstraintValue - GeomValidators_Positive: Double is not positive.</source>
228 <translation>Radius must be positive</translation>
231 <source>ConstraintValue - GeomValidators_Positive: Integer is not initialized.</source>
232 <translation>Integer radius must be set</translation>
235 <source>ConstraintValue - GeomValidators_Positive: Integer is not positive.</source>
236 <translation>Integer radius must be positive</translation>
240 <source>Model_FeatureValidator: Attribute "ConstraintValue" is not initialized.</source>
241 <translation>Set the radius</translation>
244 <source>ConstraintEntityA - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
245 <translation>Shape type must be %1</translation>
248 <source>ConstraintEntityA - GeomValidators_ShapeType: It has reference to an empty attribute</source>
249 <translation>The circle argument refers to nothing</translation>
252 <source>ConstraintEntityA - GeomValidators_ShapeType: Shape type is "%1", it should be "%2"</source>
253 <translation>The circle argument shape type is "%1", it should be "%2"</translation>
256 <source>ConstraintEntityA - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
257 <translation>The attribute with the %1 type is not processed</translation>
260 <source>ConstraintEntityA - GeomValidators_ShapeType: The result is empty</source>
261 <translation>The constraint argument refers to not existing item</translation>
264 <source>ConstraintEntityA - GeomValidators_ShapeType: The shape is empty</source>
265 <translation>The constraint argument refers to the empty shape</translation>
270 <name>SketchConstraintVertical</name>
272 <source>ModelAPI_StateInvalidArgument</source>
273 <translation>Wrong object is selected</translation>
276 <source>Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized.</source>
277 <translation>Line is not selected</translation>
280 <source>ConstraintEntityA - GeomValidators_ShapeType: The object is empty</source>
281 <translation>Line is not selected</translation>
285 <source>ConstraintEntityA - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
286 <translation>The first line references to not acceptable shape type. The type should be: %1</translation>
289 <source>ConstraintEntityA - GeomValidators_ShapeType: It has reference to an empty attribute</source>
290 <translation>The first line refers to nothing</translation>
293 <source>ConstraintEntityA - GeomValidators_ShapeType: Shape type is "%1", it should be "%2"</source>
294 <translation>The first line refers to %1 but must be %2</translation>
297 <source>ConstraintEntityA - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
298 <translation>The first line of type %1 is not supported</translation>
301 <source>ConstraintEntityA - GeomValidators_ShapeType: The result is empty</source>
302 <translation>The first line refers to not existing item</translation>
305 <source>ConstraintEntityA - GeomValidators_ShapeType: The shape is empty</source>
306 <translation>The first line refers to the empty shape</translation>
311 <name>SketchLine</name>
313 <source>GeomValidators_Different: Attributes StartPoint and EndPoint are equal.</source>
314 <translation>Start point and end point are the same</translation>
317 <source>Model_FeatureValidator: Attribute "EndPoint" is not initialized.</source>
318 <translation>End point is not selected</translation>
321 <source>Attribute "EndPoint" is locked by modification value in the viewer.</source>
322 <translation>Select an end point in the viewer</translation>
325 <source>Attribute "StartPoint" is locked by modification value in the viewer.</source>
326 <translation>Select a start point in the viewer</translation>
329 <source>Attribute "StartPoint" is not initialized.</source>
330 <translation>Start point is not selected</translation>
333 <source>Attribute "EndPoint" is not initialized.</source>
334 <translation>End point is not selected</translation>
338 <source>Model_FeatureValidator: Attribute "StartPoint" is not initialized.</source>
339 <translation>Select a start point</translation>
344 <name>SketchPoint</name>
346 <source>Model_FeatureValidator: Attribute "PointCoordindates" is not initialized.</source>
347 <translation>Point is not defined</translation>
350 <source>Attribute "PointCoordindates" is locked by modification value in the viewer.</source>
351 <translation>Select a point</translation>
356 <name>SketchRectangle</name>
358 <source>GeomValidators_Different: Attributes RectStartPoint and RectEndPoint are equal.</source>
359 <translation>Start point and end point must be different</translation>
362 <source>Attribute "RectEndPoint" is locked by modification value in the viewer.</source>
363 <translation>Select an end point of the rectangle</translation>
366 <source>Attribute "RectStartPoint" is locked by modification value in the viewer.</source>
367 <translation>Select a first point of the rectangle</translation>
371 <source>Model_FeatureValidator: Attribute "RectStartPoint" is not initialized.</source>
372 <translation>Select a first point of the rectangle</translation>
375 <source>Model_FeatureValidator: Attribute "RectEndPoint" is not initialized.</source>
376 <translation>Select an end point of the rectangle</translation>
381 <name>SketchArc</name>
383 <source>ArcRadius - GeomValidators_Positive: Double is not initialized.</source>
384 <translation>Radius value is not positive</translation>
387 <source>ArcTangentPoint - SketchPlugin_ArcTangentPoint: The attribute ArcTangentPoint should be a point</source>
388 <translation>Arc tangent point is not selected</translation>
391 <source>Attribute "ArcCenter" is locked by modification value in the viewer.</source>
392 <translation>Select a center point</translation>
395 <source>Attribute "ArcCenter" is not initialized.</source>
396 <translation>Center point is not defined</translation>
399 <source>Attribute "ArcEndPoint" is locked by modification value in the viewer.</source>
400 <translation>Select an end point</translation>
403 <source>Attribute "ArcPassedPoint" is locked by modification value in the viewer.</source>
404 <translation>Select an intermediate point</translation>
407 <source>Attribute "ArcStartPoint" is locked by modification value in the viewer.</source>
408 <translation>Select a start point</translation>
411 <source>GeomValidators_Different: Attributes ArcCenter and ArcStartPoint are equal.</source>
412 <translation>Center point and end point must be different</translation>
415 <source>GeomValidators_Different: Attributes ArcStartPoint and ArcEndPoint are equal.</source>
416 <translation>Start point and end point must be different</translation>
419 <source>Model_FeatureValidator: Attribute "ArcEndPoint" is not initialized.</source>
420 <translation>End point is not defined</translation>
423 <source>Model_FeatureValidator: Attribute "ArcPassedPoint" is not initialized.</source>
424 <translation>Intermediate point is not defined</translation>
427 <source>ArcRadius - GeomValidators_Positive: Double is not positive.</source>
428 <translation>Acr radius must e positive</translation>
431 <source>ArcRadius - GeomValidators_Positive: Integer is not initialized.</source>
432 <translation>Integer arc radius must be set</translation>
435 <source>ArcRadius - GeomValidators_Positive: Integer is not positive.</source>
436 <translation>Integer arc radius must be positive</translation>
439 <source>Model_FeatureValidator: Attribute "ArcCenter" is not initialized.</source>
440 <translation>Select an arc center</translation>
443 <source>Model_FeatureValidator: Attribute "ArcStartPoint" is not initialized.</source>
444 <translation>Select an arc start point</translation>
447 <source>Model_FeatureValidator: Attribute "ArcEndPoint" is not initialized.</source>
448 <translation>Select an arc end point</translation>
451 <source>Model_FeatureValidator: Attribute "ArcPassedPoint" is not initialized.</source>
452 <translation>Select an arc passed point</translation>
455 <source>Model_FeatureValidator: Attribute "ArcTangentPoint" is not initialized.</source>
456 <translation>Select an arc tangent point</translation>
460 <name>SketchConstraintMirror</name>
462 <source>ConstraintEntityA - GeomValidators_ShapeType: The object is empty</source>
463 <translation>Line is not selected</translation>
466 <source>Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized.</source>
467 <translation>Mirror line is not selected</translation>
470 <source>Model_FeatureValidator: Attribute "ConstraintMirrorList" is not initialized.</source>
471 <translation>Objects for mirror are not selected</translation>
474 <source>ConstraintEntityA - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
475 <translation>The mirror line references to not acceptable shape type. The type should be: %1</translation>
478 <source>ConstraintEntityA - GeomValidators_ShapeType: It has reference to an empty attribute</source>
479 <translation>The mirror line refers to nothing</translation>
482 <source>ConstraintEntityA - GeomValidators_ShapeType: Shape type is "%1", it should be "%2"</source>
483 <translation>The mirror line refers to %1 but must be %2</translation>
486 <source>ConstraintEntityA - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
487 <translation>The mirror line of type %1 is not supported</translation>
490 <source>ConstraintEntityA - GeomValidators_ShapeType: The result is empty</source>
491 <translation>The mirror line refers to not existing item</translation>
494 <source>ConstraintEntityA - GeomValidators_ShapeType: The shape is empty</source>
495 <translation>The mirror line refers to the empty shape</translation>
500 <name>SketchMultiRotation</name>
502 <source>Model_FeatureValidator: Attribute "AngleType" is not initialized.</source>
503 <translation>Type of angle is not defined</translation>
506 <source>Model_FeatureValidator: Attribute "MultiRotationCenter" is not initialized.</source>
507 <translation>Rotation center is not selected</translation>
510 <source>MultiRotationCenter - GeomValidators_ShapeType: The object is empty</source>
511 <translation>Rotation center is not selected</translation>
515 <source>MultiRotationObjects - GeomValidators_Positive: Double is not initialized.</source>
516 <translation>The total number of rotated objects is not set</translation>
519 <source>MultiRotationObjects - GeomValidators_Positive: Double is not positive.</source>
520 <translation>The total number of rotated objects must be positive</translation>
523 <source>MultiRotationObjects - GeomValidators_Positive: Integer is not initialized.</source>
524 <translation>The total number of rotated objects is not set</translation>
527 <source>MultiRotationObjects - GeomValidators_Positive: Integer is not positive.</source>
528 <translation>The total number of rotated objects must be positive</translation>
532 <source>Model_FeatureValidator: Attribute "MultiRotationList" is not initialized.</source>
533 <translation>Select objects to rotate</translation>
536 <source>Model_FeatureValidator: Attribute "MultiRotationAngle" is not initialized.</source>
537 <translation>Set rotation angle</translation>
540 <source>Model_FeatureValidator: Attribute "MultiRotationObjects" is not initialized.</source>
541 <translation>Set the number of resulting objects</translation>
544 <source>MultiRotationList - SketchPlugin_CopyValidator: The attribute with the %1 type is not processed</source>
545 <translation>The attribute with the %1 type is not processed</translation>
548 <source>MultiRotationList - SketchPlugin_CopyValidator: The object %1 is a result of copy</source>
549 <translation>The object %1 is a result of copy and can not be rotated</translation>
552 <source>MultiRotationCenter - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
553 <translation>Shape type must be %1</translation>
556 <source>MultiRotationCenter - GeomValidators_ShapeType: It has reference to an empty attribute</source>
557 <translation>The rotation center refers to nothing</translation>
560 <source>MultiRotationCenter - GeomValidators_ShapeType: Shape type is "%1", it should be "%2"</source>
561 <translation>The rotation center shape type is "%1", it should be "%2"</translation>
564 <source>MultiRotationCenter - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
565 <translation>The attribute with the %1 type is not processed</translation>
568 <source>MultiRotationCenter - GeomValidators_ShapeType: The result is empty</source>
569 <translation>The rotation center refers to not existing item</translation>
572 <source>MultiRotationCenter - GeomValidators_ShapeType: The shape is empty</source>
573 <translation>The rotation center refers to the empty shape</translation>
578 <name>SketchMultiTranslation</name>
580 <source>Model_FeatureValidator: Attribute "MultiTranslationEndPoint" is not initialized.</source>
581 <translation>End point of translation vector is not defined</translation>
584 <source>Model_FeatureValidator: Attribute "MultiTranslationList" is not initialized.</source>
585 <translation>Objects for translation are not selected</translation>
588 <source>MultiTranslationEndPoint - GeomValidators_ShapeType: The object is empty</source>
589 <translation>End point of translation vector is not selected</translation>
592 <source>MultiTranslationStartPoint - GeomValidators_ShapeType: The object is empty</source>
593 <translation>Start point of translation vector is not selected</translation>
597 <source>MultiTranslationObjects - GeomValidators_Positive: Double is not initialized.</source>
598 <translation>The total number of translated objects is not set</translation>
601 <source>MultiTranslationObjects - GeomValidators_Positive: Double is not positive.</source>
602 <translation>The total number of translated objects must be positive</translation>
605 <source>MultiTranslationObjects - GeomValidators_Positive: Integer is not initialized.</source>
606 <translation>The total number of translated objects is not set</translation>
609 <source>MultiTranslationObjects - GeomValidators_Positive: Integer is not positive.</source>
610 <translation>The total number of translated objects must be positive</translation>
614 <source>Model_FeatureValidator: Attribute "MultiTranslationStartPoint" is not initialized.</source>
615 <translation>Select a start point</translation>
618 <source>Model_FeatureValidator: Attribute "MultiTranslationObjects" is not initialized.</source>
619 <translation>Select a total number of objects</translation>
622 <source>MultiTranslationList - SketchPlugin_CopyValidator: The attribute with the %1 type is not processed</source>
623 <translation>The attribute with the %1 type is not processed</translation>
626 <source>MultiTranslationList - SketchPlugin_CopyValidator: The object %1 is a result of copy</source>
627 <translation>The object %1 is a result of copy and can not be translated</translation>
630 <source>MultiTranslationStartPoint - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
631 <translation>Shape type must be %1</translation>
634 <source>MultiTranslationStartPoint - GeomValidators_ShapeType: It has reference to an empty attribute</source>
635 <translation>The translation start point refers to nothing</translation>
638 <source>MultiTranslationStartPoint - GeomValidators_ShapeType: Shape type is "%1", it should be "%2"</source>
639 <translation>The translation start point shape type is "%1", it should be "%2"</translation>
642 <source>MultiTranslationStartPoint - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
643 <translation>The attribute with the %1 type is not processed</translation>
646 <source>MultiTranslationStartPoint - GeomValidators_ShapeType: The object is empty</source>
647 <translation>Select a start point</translation>
650 <source>MultiTranslationStartPoint - GeomValidators_ShapeType: The result is empty</source>
651 <translation>The start point refers to not existing item</translation>
654 <source>MultiTranslationStartPoint - GeomValidators_ShapeType: The shape is empty</source>
655 <translation>The start point refers to the empty shape</translation>
658 <source>MultiTranslationEndPoint - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
659 <translation>Shape type must be %1</translation>
662 <source>MultiTranslationEndPoint - GeomValidators_ShapeType: It has reference to an empty attribute</source>
663 <translation>The translation end point refers to nothing</translation>
666 <source>MultiTranslationEndPoint - GeomValidators_ShapeType: Shape type is "%1", it should be "%2"</source>
667 <translation>The translation end point shape type is "%1", it should be "%2"</translation>
670 <source>MultiTranslationEndPoint - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
671 <translation>The attribute with the %1 type is not processed</translation>
674 <source>MultiTranslationEndPoint - GeomValidators_ShapeType: The object is empty</source>
675 <translation>Select an end point</translation>
678 <source>MultiTranslationEndPoint - GeomValidators_ShapeType: The result is empty</source>
679 <translation>The end point refers to not existing item</translation>
682 <source>MultiTranslationEndPoint - GeomValidators_ShapeType: The shape is empty</source>
683 <translation>The end point refers to the empty shape</translation>
688 <name>SketchConstraintAngle</name>
690 <source>Attribute "ConstraintFlyoutValuePnt" is locked by modification value in the viewer.</source>
691 <translation>Flyout value point is not clicked in the viewer</translation>
694 <source>ConstraintEntityA - GeomValidators_ShapeType: The object is empty</source>
695 <translation>First object is not selected</translation>
698 <source>ConstraintEntityB - GeomValidators_ShapeType: The object is empty</source>
699 <translation>Second object is not selected</translation>
703 <source>ConstraintEntityB - SketchPlugin_ExternalValidator: Both features, attribute and attribute in parameter, are external.</source>
704 <translation>An angle can not be created between two external objects</translation>
708 <source>Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized.</source>
709 <translation>First object is not selected</translation>
712 <source>Model_FeatureValidator: Attribute "ConstraintEntityB" is not initialized.</source>
713 <translation>Second object is not selected</translation>
716 <source>Model_FeatureValidator: Attribute "AngleValue" is not initialized.</source>
717 <translation>Set the angle value</translation>
720 <source>Model_FeatureValidator: Attribute "AngleType" is not initialized.</source>
721 <translation>Type of angle is not set</translation>
724 <source>ConstraintEntityA - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
725 <translation>Shape type must be %1</translation>
728 <source>ConstraintEntityA - GeomValidators_ShapeType: It has reference to an empty attribute</source>
729 <translation>The first object refers to nothing</translation>
732 <source>ConstraintEntityA - GeomValidators_ShapeType: Shape type is "%1", it should be "%2"</source>
733 <translation>The first object shape type is "%1", it should be "%2"</translation>
736 <source>ConstraintEntityA - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
737 <translation>The attribute with the %1 type is not processed</translation>
740 <source>ConstraintEntityA - GeomValidators_ShapeType: The result is empty</source>
741 <translation>The constraint argument refers to not existing item</translation>
744 <source>ConstraintEntityA - GeomValidators_ShapeType: The shape is empty</source>
745 <translation>The constraint argument refers to the empty shape</translation>
748 <source>ConstraintEntityA - SketchPlugin_ExternalValidator: Both features, attribute and attribute in parameter, are external.</source>
749 <translation>Angle can not be created on two external entities</translation>
752 <source>ConstraintEntityB - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
753 <translation>Shape type must be %1</translation>
756 <source>ConstraintEntityB - GeomValidators_ShapeType: It has reference to an empty attribute</source>
757 <translation>The second object refers to nothing</translation>
760 <source>ConstraintEntityB - GeomValidators_ShapeType: Shape type is "%1", it should be "%2"</source>
761 <translation>The second object shape type is "%1", it should be "%2"</translation>
764 <source>ConstraintEntityB - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
765 <translation>The attribute with the %1 type is not processed</translation>
768 <source>ConstraintEntityB - GeomValidators_ShapeType: The result is empty</source>
769 <translation>The constraint argument refers to not existing item</translation>
772 <source>ConstraintEntityB - GeomValidators_ShapeType: The shape is empty</source>
773 <translation>The constraint argument refers to the empty shape</translation>
778 <name>SketchConstraintCoincidence</name>
780 <source>ConstraintEntityA - PartSet_DifferentObjects: The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes.</source>
781 <translation>Diferent objects should be selected</translation>
784 <source>ConstraintEntityB - PartSet_DifferentObjects: The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes.</source>
785 <translation>Diferent objects should be selected</translation>
788 <source>Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized.</source>
789 <translation>First object is not selected</translation>
792 <source>Model_FeatureValidator: Attribute "ConstraintEntityB" is not initialized.</source>
793 <translation>Second object is not selected</translation>
797 <source>ConstraintEntityB - SketchPlugin_ExternalValidator: Both features, attribute and attribute in parameter, are external.</source>
798 <translation>A coincidence can not be created between two external objects</translation>
802 <source>ConstraintEntityA - SketchPlugin_ExternalValidator: Both features, attribute and attribute in parameter, are external.</source>
803 <translation>A coincidence can not be created between two external objects</translation>
808 <name>SketchConstraintDistance</name>
810 <source>Attribute "ConstraintFlyoutValuePnt" is locked by modification value in the viewer.</source>
811 <translation>Flyout value point is not clicked in the viewer</translation>
814 <source>ConstraintEntityA - GeomValidators_ShapeType: The object is empty</source>
815 <translation>First object is not selected</translation>
818 <source>ConstraintEntityB - GeomValidators_ShapeType: The object is empty</source>
819 <translation>Second object is not selected</translation>
822 <source>ConstraintValue - GeomValidators_Positive: Double is not initialized.</source>
823 <translation>Distance value must be set</translation>
826 <source>Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized.</source>
827 <translation>First object is not selected</translation>
830 <source>Model_FeatureValidator: Attribute "ConstraintEntityB" is not initialized.</source>
831 <translation>Second object is not selected</translation>
835 <source>ConstraintValue - GeomValidators_Positive: Double is not positive.</source>
836 <translation>Distance value must be positive</translation>
839 <source>ConstraintValue - GeomValidators_Positive: Integer is not initialized.</source>
840 <translation>Integer distance value must be set</translation>
843 <source>ConstraintValue - GeomValidators_Positive: Integer is not positive.</source>
844 <translation>Integer distance value must be positive</translation>
848 <source>Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized.</source>
849 <translation>First object is not selected</translation>
852 <source>Model_FeatureValidator: Attribute "ConstraintEntityB" is not initialized.</source>
853 <translation>Second object is not selected</translation>
856 <source>Model_FeatureValidator: Attribute "ConstraintValue" is not initialized.</source>
857 <translation>Set the distance</translation>
860 <source>ConstraintEntityA - SketchPlugin_ExternalValidator: Both features, attribute and attribute in parameter, are external.</source>
861 <translation>Distance can not be set between two external objects</translation>
864 <source>ConstraintEntityA - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
865 <translation>Shape type must be %1</translation>
868 <source>ConstraintEntityA - GeomValidators_ShapeType: It has reference to an empty attribute</source>
869 <translation>The first object refers to nothing</translation>
872 <source>ConstraintEntityA - GeomValidators_ShapeType: Shape type is "%1", it should be "%2"</source>
873 <translation>The first object shape type is "%1", it should be "%2"</translation>
876 <source>ConstraintEntityA - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
877 <translation>The attribute with the %1 type is not processed</translation>
880 <source>ConstraintEntityA - GeomValidators_ShapeType: The result is empty</source>
881 <translation>The constraint argument refers to not existing item</translation>
884 <source>ConstraintEntityA - GeomValidators_ShapeType: The shape is empty</source>
885 <translation>The constraint argument refers to the empty shape</translation>
888 <source>ConstraintEntityB - SketchPlugin_ExternalValidator: Both features, attribute and attribute in parameter, are external.</source>
889 <translation>Distance can not be set between two external objects</translation>
892 <source>ConstraintEntityB - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
893 <translation>Shape type must be %1</translation>
896 <source>ConstraintEntityB - GeomValidators_ShapeType: It has reference to an empty attribute</source>
897 <translation>The second object refers to nothing</translation>
900 <source>ConstraintEntityB - GeomValidators_ShapeType: Shape type is "%1", it should be "%2"</source>
901 <translation>The second object shape type is "%1", it should be "%2"</translation>
904 <source>ConstraintEntityB - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
905 <translation>The attribute with the %1 type is not processed</translation>
908 <source>ConstraintEntityB - GeomValidators_ShapeType: The result is empty</source>
909 <translation>The constraint argument refers to not existing item</translation>
912 <source>ConstraintEntityB - GeomValidators_ShapeType: The shape is empty</source>
913 <translation>The constraint argument refers to the empty shape</translation>
918 <name>SketchConstraintEqual</name>
920 <source>ConstraintEntityA - PartSet_DifferentObjects: The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes.</source>
921 <translation>Diferent objects should be selected</translation>
924 <source>ConstraintEntityB - PartSet_DifferentObjects: The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes.</source>
925 <translation>Diferent objects should be selected</translation>
928 <source>ConstraintEntityB - SketchPlugin_EqualAttr: An empty object is used.</source>
929 <translation>An empty object is used</translation>
932 <source>Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized.</source>
933 <translation>First object is not selected</translation>
936 <source>Model_FeatureValidator: Attribute "ConstraintEntityB" is not initialized.</source>
937 <translation>Second object is not selected</translation>
941 <source>ConstraintEntityB - SketchPlugin_ExternalValidator: Both features, attribute and attribute in parameter, are external.</source>
942 <translation>An equality can not be set between two external objects</translation>
946 <source>ConstraintEntityA - SketchPlugin_ExternalValidator: Both features, attribute and attribute in parameter, are external.</source>
947 <translation>An equality can not be set between two external objects</translation>
952 <name>SketchConstraintLength</name>
954 <source>Attribute "ConstraintFlyoutValuePnt" is locked by modification value in the viewer.</source>
955 <translation>Flyout value point is not clicked in the viewer</translation>
958 <source>ConstraintEntityA - GeomValidators_ShapeType: The object is empty</source>
959 <translation>Object is not selected</translation>
962 <source>ConstraintValue - GeomValidators_Positive: Double is not initialized.</source>
963 <translation>Set the length value</translation>
966 <source>Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized.</source>
967 <translation>Line is not selected</translation>
971 <source>ConstraintValue - GeomValidators_Positive: Double is not positive.</source>
972 <translation>Length value is not positive</translation>
975 <source>ConstraintValue - GeomValidators_Positive: Integer is not initialized.</source>
976 <translation>Set the integer length value</translation>
979 <source>ConstraintValue - GeomValidators_Positive: Integer is not positive.</source>
980 <translation>Integer length value is not positive</translation>
984 <source>Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized.</source>
985 <translation>Line is not selected</translation>
988 <source>Model_FeatureValidator: Attribute "ConstraintValue" is not initialized.</source>
989 <translation>Set the length value</translation>
992 <source>ConstraintEntityA - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
993 <translation>Shape type must be %1</translation>
996 <source>ConstraintEntityA - GeomValidators_ShapeType: It has reference to an empty attribute</source>
997 <translation>The line refers to nothing</translation>
1000 <source>ConstraintEntityA - GeomValidators_ShapeType: Shape type is "%1", it should be "%2"</source>
1001 <translation>The line shape type is "%1", it should be "%2"</translation>
1004 <source>ConstraintEntityA - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
1005 <translation>The attribute with the %1 type is not processed</translation>
1008 <source>ConstraintEntityA - GeomValidators_ShapeType: The result is empty</source>
1009 <translation>The constraint argument refers to not existing item</translation>
1012 <source>ConstraintEntityA - GeomValidators_ShapeType: The shape is empty</source>
1013 <translation>The constraint argument refers to the empty shape</translation>
1018 <name>SketchConstraintMiddle</name>
1020 <source>ConstraintEntityA - PartSet_DifferentObjects: The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes.</source>
1021 <translation>Diferent objects should be selected</translation>
1024 <source>ConstraintEntityB - PartSet_DifferentObjects: The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes.</source>
1025 <translation>Diferent objects should be selected</translation>
1028 <source>ConstraintEntityB - SketchPlugin_MiddlePointAttr: Middle point constraint allows points and lines only</source>
1029 <translation>Not point or line is selected</translation>
1032 <source>Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized.</source>
1033 <translation>First object is not selected</translation>
1036 <source>Model_FeatureValidator: Attribute "ConstraintEntityB" is not initialized.</source>
1037 <translation>Second object is not selected</translation>
1041 <source>ConstraintEntityB - SketchPlugin_ExternalValidator: Both features, attribute and attribute in parameter, are external.</source>
1042 <translation>A middle can not be set for two external objects</translation>
1046 <source>ConstraintEntityA - SketchPlugin_ExternalValidator: Both features, attribute and attribute in parameter, are external.</source>
1047 <translation>A middle can not be set for two external objects</translation>
1052 <name>SketchConstraintParallel</name>
1054 <source>ConstraintEntityA - GeomValidators_ShapeType: The object is empty</source>
1055 <translation>First object is not selected</translation>
1058 <source>ConstraintEntityB - GeomValidators_ShapeType: The object is empty</source>
1059 <translation>Second object is not selected</translation>
1062 <source>Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized.</source>
1063 <translation>First line is not selected</translation>
1066 <source>Model_FeatureValidator: Attribute "ConstraintEntityB" is not initialized.</source>
1067 <translation>Second line is not selected</translation>
1071 <source>ConstraintEntityB - SketchPlugin_ExternalValidator: Both features, attribute and attribute in parameter, are external.</source>
1072 <translation>A parallel can not be set between two external objects</translation>
1076 <source>ConstraintEntityA - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1077 <translation>Shape type must be %1</translation>
1080 <source>ConstraintEntityA - GeomValidators_ShapeType: It has reference to an empty attribute</source>
1081 <translation>The first line refers to nothing</translation>
1084 <source>ConstraintEntityA - GeomValidators_ShapeType: Shape type is "%1", it should be "%2"</source>
1085 <translation>The first line shape type is "%1", it should be "%2"</translation>
1088 <source>ConstraintEntityA - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
1089 <translation>The attribute with the %1 type is not processed</translation>
1092 <source>ConstraintEntityA - GeomValidators_ShapeType: The result is empty</source>
1093 <translation>The constraint argument refers to not existing item</translation>
1096 <source>ConstraintEntityA - GeomValidators_ShapeType: The shape is empty</source>
1097 <translation>The constraint argument refers to the empty shape</translation>
1100 <source>ConstraintEntityA - SketchPlugin_ExternalValidator: Both features, attribute and attribute in parameter, are external.</source>
1101 <translation>A parallel can not be set between two external objects</translation>
1104 <source>ConstraintEntityB - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1105 <translation>Shape type must be %1</translation>
1108 <source>ConstraintEntityB - GeomValidators_ShapeType: It has reference to an empty attribute</source>
1109 <translation>The second line refers to nothing</translation>
1112 <source>ConstraintEntityB - GeomValidators_ShapeType: Shape type is "%1", it should be "%2"</source>
1113 <translation>The second line shape type is "%1", it should be "%2"</translation>
1116 <source>ConstraintEntityB - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
1117 <translation>The attribute with the %1 type is not processed</translation>
1120 <source>ConstraintEntityB - GeomValidators_ShapeType: The result is empty</source>
1121 <translation>The constraint argument refers to not existing item</translation>
1124 <source>ConstraintEntityB - GeomValidators_ShapeType: The shape is empty</source>
1125 <translation>The constraint argument refers to the empty shape</translation>
1130 <name>SketchConstraintRigid</name>
1132 <source>ConstraintEntityA - GeomValidators_ShapeType: The object is empty</source>
1133 <translation>Object is not selected</translation>
1136 <source>Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized.</source>
1137 <translation>Object is not selected</translation>
1141 <source>ConstraintEntityA - GeomValidators_ShapeType: It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1142 <translation>The fixed constraint references to not acceptable shape type. The type should be: %1</translation>
1145 <source>ConstraintEntityA - GeomValidators_ShapeType: It has reference to an empty attribute</source>
1146 <translation>The fixed constraint refers to nothing</translation>
1149 <source>ConstraintEntityA - GeomValidators_ShapeType: Shape type is "%1", it should be "%2"</source>
1150 <translation>The fixed constraint refers to %1 but must be %2</translation>
1153 <source>ConstraintEntityA - GeomValidators_ShapeType: The attribute with the %1 type is not processed</source>
1154 <translation>The fixed constraint of type %1 is not supported</translation>
1157 <source>ConstraintEntityA - GeomValidators_ShapeType: The result is empty</source>
1158 <translation>The fixed constraint refers to not existing item</translation>
1161 <source>ConstraintEntityA - GeomValidators_ShapeType: The shape is empty</source>
1162 <translation>The fixed constraint refers to the empty shape</translation>
1167 <name>SketchConstraintTangent</name>
1169 <source>ConstraintEntityA - PartSet_DifferentObjects: The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes.</source>
1170 <translation>Diferent objects should be selected</translation>
1173 <source>ConstraintEntityB - PartSet_DifferentObjects: The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes.</source>
1174 <translation>Diferent objects should be selected</translation>
1177 <source>ConstraintEntityB - SketchPlugin_TangentAttr: It uses an empty object</source>
1178 <translation>Selection is not valid</translation>
1181 <source>Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized.</source>
1182 <translation>First object is not selected</translation>
1185 <source>Model_FeatureValidator: Attribute "ConstraintEntityB" is not initialized.</source>
1186 <translation>Second object is not selected</translation>
1191 <name>SketchConstraintSplit</name>
1193 <source>ConstraintEntityA - SketchPlugin_SplitValidator: The attribute with the %1 type is not processed</source>
1194 <translation>Only attribute selection can be used for the sketch face, not %1</translation>
1199 <name>SketchConstraintFillet</name>
1201 <source>ConstraintValue - GeomValidators_Positive: Double is not initialized.</source>
1202 <translation>Set the fillet radius</translation>
1205 <source>ConstraintValue - GeomValidators_Positive: Double is not positive.</source>
1206 <translation>The fillet radius must be positive</translation>
1209 <source>ConstraintValue - GeomValidators_Positive: Integer is not initialized.</source>
1210 <translation>Set the integer fillet radius</translation>
1213 <source>ConstraintValue - GeomValidators_Positive: Integer is not positive.</source>
1214 <translation>The integer fillet radius must be positive</translation>
1217 <source>Model_FeatureValidator: Attribute "ConstraintEntityA" is not initialized.</source>
1218 <translation>Select one or several points for filet</translation>
1221 <source>Model_FeatureValidator: Attribute "ConstraintValue" is not initialized.</source>
1222 <translation>Set the fillet radius</translation>
1225 <source>ConstraintEntityA - SketchPlugin_FilletVertexValidator: Error: List of points is empty.</source>
1226 <translation>List of points is empty</translation>
1229 <source>ConstraintEntityA - SketchPlugin_FilletVertexValidator: Error: one of the selected point does not have coicidence.</source>
1230 <translation>One of the selected point does not have coicidence</translation>
1233 <source>ConstraintEntityA - SketchPlugin_FilletVertexValidator: Error: One of the selected points does not have two suitable edges for fillet.</source>
1234 <translation>One of the selected points does not have two suitable edges for fillet</translation>
1237 <source>ConstraintEntityA - SketchPlugin_FilletVertexValidator: Error: Edges in selected point has tangent constraint.</source>
1238 <translation>Edges in selected point has tangent constraint</translation>
1241 <source>ConstraintEntityA - SketchPlugin_FilletVertexValidator: Error: Edges in selected point has tangent constraint.</source>
1242 <translation>Edges in selected point has tangent constraint</translation>
1247 <name>SketchProjection</name>
1249 <source>ExternalFeature - SketchPlugin_ProjectionValidator: The attribute with the %1 type is not processed</source>
1250 <translation>An argument of type %1 of the projection feature is not supported</translation>
1253 <source>ExternalFeature - SketchPlugin_ProjectionValidator: The attribute %1 should be an edge</source>
1254 <translation>The projected item must be an edge</translation>
1257 <source>ExternalFeature - SketchPlugin_ProjectionValidator: There is no sketch referring to the current feature</source>
1258 <translation>The projection feature has no sketch</translation>
1263 <name>SketchProjection</name>
1265 <source>Model_FeatureValidator: Attribute "ExternalFeature" is not initialized.</source>
1266 <translation></translation>