1 <?xml version="1.0" encoding="utf-8"?>
3 <TS version="2.0" language="en_US">
8 <source>Curve fitting</source>
9 <translation>Curve fitting</translation>
14 <name>Sketch:Model_FeatureValidator</name>
16 <source>Attribute "%1" is not initialized.</source>
17 <translation>Select a plane for the sketch</translation>
21 <name>Sketch:Model_FeatureValidator</name>
23 <source>Attribute "%1" is not initialized.</source>
24 <translation>Sketch objects are not defined</translation>
28 <name>Sketch:External:GeomValidators_Face</name>
30 <source>The attribute with the %1 type is not processed</source>
31 <translation>Only attribute selection can be used for the sketch face, not %1</translation>
35 <name>Sketch:External:GeomValidators_Face</name>
37 <source>The shape is not a face.</source>
38 <translation>Sketch can be created only on a face</translation>
42 <name>Sketch:External:GeomValidators_Face</name>
44 <source>The shape is not a plane.</source>
45 <translation>Sketch can be created only on a planar face</translation>
49 <name>Sketch:External:GeomValidators_Face</name>
51 <source>The shape is not a cylinder.</source>
52 <translation>Sketch can be created only on a cylindrical face</translation>
56 <name>Sketch:External:GeomValidators_Face</name>
58 <source>The shape is not an available face.</source>
59 <translation>Sketch cannot be created on the selected face</translation>
63 <name>Sketch:Model_FeatureValidator</name>
65 <source>Attribute "%1" is not initialized.</source>
66 <translation>Select the sketch plane</translation>
70 <name>Sketch:Model_FeatureValidator</name>
72 <source>Attribute "%1" is not initialized.</source>
73 <translation>Can not compute degrees of freedom</translation>
77 <name>Sketch:Model_FeatureValidator</name>
79 <source>Attribute "%1" is not initialized.</source>
80 <translation>Can not compute the solver error</translation>
85 <name>SketchMacroCircle:center_point</name>
87 <source>Attribute "%1" is locked by modification value in the viewer.</source>
88 <translation>Select a point in the viewer</translation>
91 <source>Attribute "%1" is not initialized.</source>
92 <translation>Select a point in the viewer</translation>
96 <name>SketchMacroCircle:passed_point</name>
98 <source>Attribute "%1" is locked by modification value in the viewer.</source>
99 <translation>Select a point in the viewer</translation>
103 <name>SketchMacroCircle:CircleRadius:GeomValidators_Positive</name>
105 <source>Value is too small.</source>
106 <translation>Radius value is too small</translation>
110 <name>SketchMacroCircle:Model_FeatureValidator</name>
112 <source>Attribute "%1" is not initialized.</source>
113 <translation>A center point is not selected</translation>
117 <name>SketchMacroCircle:Model_FeatureValidator</name>
119 <source>Attribute "%1" is not initialized.</source>
120 <translation>A first point is not selected</translation>
124 <name>SketchMacroCircle:Model_FeatureValidator</name>
126 <source>Attribute "%1" is not initialized.</source>
127 <translation>A second point is not selected</translation>
131 <name>SketchMacroCircle:Model_FeatureValidator</name>
133 <source>Attribute "%1" is not initialized.</source>
134 <translation>A third point is not selected</translation>
138 <name>SketchMacroCircle:CircleCenter</name>
140 <source>Attribute "circle_center" is locked by modification value in the viewer.</source>
141 <translation>Select a center point</translation>
145 <name>SketchMacroCircle:FirstPoint</name>
147 <source>Attribute "FirstPoint" is locked by modification value in the viewer.</source>
148 <translation>Select a center point</translation>
152 <name>SketchMacroCircle:SecondPoint</name>
154 <source>Attribute "SecondPoint" is locked by modification value in the viewer.</source>
155 <translation>Select a center point</translation>
159 <name>SketchMacroCircle:ThirdPoint</name>
161 <source>Attribute "ThirdPoint" is locked by modification value in the viewer.</source>
162 <translation>Select a center point</translation>
166 <name>SketchMacroCircle:CircleRadius</name>
168 <source>Attribute "circle_radius" is locked by modification value in the viewer.</source>
169 <translation>Select a radius distance</translation>
173 <name>SketchMacroCircle:CircleRadius:GeomValidators_Positive</name>
175 <source>Integer is not initialized.</source>
176 <translation>Integer radius is not initialized</translation>
180 <name>SketchMacroCircle:CircleRadius:GeomValidators_Positive</name>
182 <source>Integer is not positive.</source>
183 <translation>Integer radius must be set</translation>
187 <name>SketchMacroCircle:Model_FeatureValidator</name>
189 <source>Attribute "%1" is not initialized.</source>
190 <translation>Set the circle radius</translation>
195 <name>SketchMacroArc:Model_FeatureValidator</name>
197 <source>Attribute "%1" is not initialized.</source>
198 <translation>Select a point.</translation>
202 <name>SketchMacroArc:center_point</name>
204 <source>Attribute "%1" is locked by modification value in the viewer.</source>
205 <translation>Select a center point.</translation>
209 <name>SketchMacroArc:end_point_1</name>
211 <source>Attribute "%1" is locked by modification value in the viewer.</source>
212 <translation>Select an end point in the viewer.</translation>
216 <name>SketchMacroArc:end_point_2</name>
218 <source>Attribute "%1" is locked by modification value in the viewer.</source>
219 <translation>Select an end point in the viewer.</translation>
223 <name>SketchMacroArc:end_point_3</name>
225 <source>Attribute "%1" is locked by modification value in the viewer.</source>
226 <translation>Select an end point in the viewer.</translation>
229 <source>Attribute "%1" is not initialized.</source>
230 <translation>Select an end point in the viewer.</translation>
234 <name>SketchMacroArc:passed_point</name>
236 <source>Attribute "%1" is locked by modification value in the viewer.</source>
237 <translation>Select an passed point in the viewer.</translation>
241 <name>SketchMacroArc:start_point_1</name>
243 <source>Attribute "%1" is locked by modification value in the viewer.</source>
244 <translation>Select a start point.</translation>
248 <name>SketchMacroArc:start_point_2</name>
250 <source>Attribute "%1" is locked by modification value in the viewer.</source>
251 <translation>Select a start point.</translation>
256 <name>SketchMacroEllipse:Model_FeatureValidator</name>
258 <source>Attribute "%1" is not initialized.</source>
259 <translation>Select a point.</translation>
263 <name>SketchMacroEllipse:first_point</name>
265 <source>Attribute "%1" is locked by modification value in the viewer.</source>
266 <translation>Select a first point in the viewer.</translation>
270 <name>SketchMacroEllipse:passed_point</name>
272 <source>Attribute "%1" is locked by modification value in the viewer.</source>
273 <translation>Select a passed point.</translation>
277 <name>SketchMacroEllipse:second_point</name>
279 <source>Attribute "%1" is locked by modification value in the viewer.</source>
280 <translation>Select a second point.</translation>
285 <name>SketchMacroEllipticArc:Model_FeatureValidator</name>
287 <source>Attribute "%1" is not initialized.</source>
288 <translation>Select a point.</translation>
292 <name>SketchMacroEllipticArc:center</name>
294 <source>Attribute "%1" is locked by modification value in the viewer.</source>
295 <translation>Select a point.</translation>
298 <source>Attribute "%1" is not initialized.</source>
299 <translation>Select a center point.</translation>
303 <name>SketchMacroEllipticArc:end_point</name>
305 <source>Attribute "%1" is locked by modification value in the viewer.</source>
306 <translation>Select an end point.</translation>
309 <source>Attribute "%1" is not initialized.</source>
310 <translation>Select an end point.</translation>
314 <name>SketchMacroEllipticArc:major_axis_point</name>
316 <source>Attribute "%1" is locked by modification value in the viewer.</source>
317 <translation>Select a major axis point.</translation>
320 <source>Attribute "%1" is not initialized.</source>
321 <translation>Select a major axis point.</translation>
326 <name>SketchSplit:Model_FeatureValidator</name>
328 <source>Attribute "%1" is not initialized.</source>
329 <translation>Select a segment to split in the viewer.</translation>
333 <name>SketchSplit:SelectedObject:SketchPlugin_SplitValidator</name>
335 <source>Select a segment to split in the viewer.</source>
336 <translation></translation>
341 <name>SketchConstraintHorizontal:Model_FeatureValidator</name>
343 <source>Attribute "%1" is not initialized.</source>
344 <translation>Line is not selected</translation>
348 <name>SketchConstraintHorizontal</name>
350 <source>ModelAPI_StateInvalidArgument</source>
351 <translation>Wrong object is selected</translation>
355 <name>SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType</name>
357 <source>The object is empty</source>
358 <translation>Line is not selected</translation>
362 <name>SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType</name>
364 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
365 <translation>The constraint argument does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
369 <name>SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType</name>
371 <source>It has reference to an empty attribute</source>
372 <translation>The constraint argument refers to nothing</translation>
376 <name>SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType</name>
378 <source>Shape type is "%1", it should be "%2"</source>
379 <translation>The constraint argument refers to %1 but must be %2</translation>
383 <name>SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType</name>
385 <source>The attribute with the %1 type is not processed</source>
386 <translation>The constraint argument of type %1 is not supported</translation>
390 <name>SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType</name>
392 <source>The result is empty</source>
393 <translation>The constraint argument refers to not existing item</translation>
397 <name>SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType</name>
399 <source>The shape is empty</source>
400 <translation>The constraint argument refers to the empty shape</translation>
405 <name>SketchConstraintPerpendicular:Model_FeatureValidator</name>
407 <source>Attribute "%1" is not initialized.</source>
408 <translation>First line is not selected</translation>
412 <name>SketchConstraintPerpendicular:Model_FeatureValidator</name>
414 <source>Attribute "%1" is not initialized.</source>
415 <translation>Second line is not selected</translation>
419 <name>SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType</name>
421 <source>The object is empty</source>
422 <translation>First line is not selected</translation>
426 <name>SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType</name>
428 <source>The object is empty</source>
429 <translation>Second line is not selected</translation>
433 <name>SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType</name>
435 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
436 <translation>The second line references to not acceptable shape type. The type should be: %1</translation>
440 <name>SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType</name>
442 <source>It has reference to an empty attribute</source>
443 <translation>The second line refers to nothing</translation>
447 <name>SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType</name>
449 <source>Shape type is "%1", it should be "%2"</source>
450 <translation>The second line refers to %1 but must be %2</translation>
454 <name>SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType</name>
456 <source>The attribute with the %1 type is not processed</source>
457 <translation>The second line of type %1 is not supported</translation>
461 <name>SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType</name>
463 <source>The result is empty</source>
464 <translation>The second line refers to not existing item</translation>
468 <name>SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType</name>
470 <source>The shape is empty</source>
471 <translation>The second line refers to the empty shape</translation>
475 <name>SketchConstraintPerpendicular:ConstraintEntityA:SketchPlugin_ExternalValidator</name>
477 <source>Both features, attribute and attribute in parameter, are external.</source>
478 <translation>Two external lines can not be constrained as perpendicular</translation>
482 <name>SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType</name>
484 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
485 <translation>Shape type must be %1</translation>
489 <name>SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType</name>
491 <source>It has reference to an empty attribute</source>
492 <translation>The first line refers to nothing</translation>
496 <name>SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType</name>
498 <source>Shape type is "%1", it should be "%2"</source>
499 <translation>The first line shape type is "%1", it should be "%2"</translation>
503 <name>SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType</name>
505 <source>The attribute with the %1 type is not processed</source>
506 <translation>The attribute with the %1 type is not processed</translation>
510 <name>SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType</name>
512 <source>The result is empty</source>
513 <translation>The constraint argument refers to not existing item</translation>
517 <name>SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType</name>
519 <source>The shape is empty</source>
520 <translation>The constraint argument refers to the empty shape</translation>
524 <name>SketchConstraintPerpendicular:ConstraintEntityB:SketchPlugin_ExternalValidator</name>
526 <source>Both features, attribute and attribute in parameter, are external.</source>
527 <translation>Two external lines can not be constrained as perpendicular</translation>
532 <name>SketchConstraintRadius:Model_FeatureValidator</name>
534 <source>Attribute "%1" is not initialized.</source>
535 <translation>Circle is not selected</translation>
539 <name>SketchConstraintRadius:ConstraintFlyoutValuePnt</name>
541 <source>Attribute "ConstraintFlyoutValuePnt" is locked by modification value in the viewer.</source>
542 <translation>Flyout value point is not clicked in the viewer</translation>
546 <name>SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType</name>
548 <source>The object is empty</source>
549 <translation>Object is not selected</translation>
553 <name>SketchConstraintRadius:ConstraintValue:GeomValidators_Positive</name>
555 <source>Double is not initialized.</source>
556 <translation>Radius value is not positive</translation>
560 <name>SketchConstraintRadius:ConstraintValue:GeomValidators_Positive</name>
562 <source>Value is too small.</source>
563 <translation>Radius is too small</translation>
567 <name>SketchConstraintRadius:ConstraintValue:GeomValidators_Positive</name>
569 <source>Integer is not initialized.</source>
570 <translation>Integer radius must be set</translation>
574 <name>SketchConstraintRadius:ConstraintValue:GeomValidators_Positive</name>
576 <source>Integer is not positive.</source>
577 <translation>Integer radius must be positive</translation>
581 <name>SketchConstraintRadius:Model_FeatureValidator</name>
583 <source>Attribute "%1" is not initialized.</source>
584 <translation>Set the radius</translation>
588 <name>SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType</name>
590 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
591 <translation>Shape type must be %1</translation>
595 <name>SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType</name>
597 <source>It has reference to an empty attribute</source>
598 <translation>The circle argument refers to nothing</translation>
602 <name>SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType</name>
604 <source>Shape type is "%1", it should be "%2"</source>
605 <translation>The circle argument shape type is "%1", it should be "%2"</translation>
609 <name>SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType</name>
611 <source>The attribute with the %1 type is not processed</source>
612 <translation>The attribute with the %1 type is not processed</translation>
616 <name>SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType</name>
618 <source>The result is empty</source>
619 <translation>The constraint argument refers to not existing item</translation>
623 <name>SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType</name>
625 <source>The shape is empty</source>
626 <translation>The constraint argument refers to the empty shape</translation>
631 <name>SketchConstraintVertical</name>
633 <source>ModelAPI_StateInvalidArgument</source>
634 <translation>Wrong object is selected</translation>
638 <name>SketchConstraintVertical:Model_FeatureValidator</name>
640 <source>Attribute "%1" is not initialized.</source>
641 <translation>Line is not selected</translation>
645 <name>SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType</name>
647 <source>The object is empty</source>
648 <translation>Line is not selected</translation>
652 <name>SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType</name>
654 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
655 <translation>The first line references to not acceptable shape type. The type should be: %1</translation>
659 <name>SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType</name>
661 <source>It has reference to an empty attribute</source>
662 <translation>The first line refers to nothing</translation>
666 <name>SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType</name>
668 <source>Shape type is "%1", it should be "%2"</source>
669 <translation>The first line refers to %1 but must be %2</translation>
673 <name>SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType</name>
675 <source>The attribute with the %1 type is not processed</source>
676 <translation>The first line of type %1 is not supported</translation>
680 <name>SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType</name>
682 <source>The result is empty</source>
683 <translation>The first line refers to not existing item</translation>
687 <name>SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType</name>
689 <source>The shape is empty</source>
690 <translation>The first line refers to the empty shape</translation>
695 <name>SketchLine:GeomValidators_Different</name>
697 <source>Attributes StartPoint and EndPoint are equal.</source>
698 <translation>Start point and end point are the same</translation>
702 <name>SketchLine:Model_FeatureValidator</name>
704 <source>Attribute "%1" is not initialized.</source>
705 <translation>End point is not selected</translation>
709 <name>SketchLine:EndPoint</name>
711 <source>Attribute "%1" is locked by modification value in the viewer.</source>
712 <translation>Select an end point in the viewer</translation>
716 <name>SketchLine:StartPoint</name>
718 <source>Attribute "%1" is locked by modification value in the viewer.</source>
719 <translation>Select a start point in the viewer</translation>
723 <name>SketchLine:StartPoint</name>
725 <source>Attribute "%1" is not initialized.</source>
726 <translation>Start point is not selected</translation>
730 <name>SketchLine:EndPoint</name>
732 <source>Attribute "%1" is not initialized.</source>
733 <translation>End point is not selected</translation>
737 <name>SketchLine:Model_FeatureValidator</name>
739 <source>Attribute "%1" is not initialized.</source>
740 <translation>Select a start point</translation>
745 <name>SketchPoint:Model_FeatureValidator</name>
747 <source>Attribute "%1" is not initialized.</source>
748 <translation>Point is not defined</translation>
752 <name>SketchPoint:PointCoordinates</name>
754 <source>Attribute "%1" is not initialized.</source>
755 <translation>Select a point</translation>
759 <name>SketchPoint:PointCoordinates</name>
761 <source>Attribute "%1" is locked by modification value in the viewer.</source>
762 <translation>Select a point</translation>
767 <name>SketchRectangle:GeomValidators_Different</name>
769 <source>Attributes RectStartPoint and RectEndPoint are equal.</source>
770 <translation>Start point and end point must be different</translation>
774 <name>SketchRectangle:RectEndPoint</name>
776 <source>Attribute "%1" is locked by modification value in the viewer.</source>
777 <translation>Select an end point of the rectangle.</translation>
781 <name>SketchRectangle:RectStartPoint</name>
783 <source>Attribute "%1" is locked by modification value in the viewer.</source>
784 <translation>Select a point.</translation>
788 <name>SketchRectangle:Model_FeatureValidator</name>
790 <source>Attribute "%1" is not initialized.</source>
791 <translation>Select a point.</translation>
795 <name>SketchRectangle:RectEndPoint</name>
797 <source>Attribute "%1" is locked by modification value in the viewer.</source>
798 <translation>Select a point.</translation>
802 <name>SketchRectangle:RectStartPoint</name>
804 <source>Attribute "%1" is locked by modification value in the viewer.</source>
805 <translation>Select an point.</translation>
810 <name>SketchArc:ArcRadius:GeomValidators_Positive</name>
812 <source>Double is not initialized.</source>
813 <translation>Radius value is not positive</translation>
817 <name>SketchArc:ArcTangentPoint:SketchPlugin_ArcTangentPoint</name>
819 <source>The attribute ArcTangentPoint should be a point</source>
820 <translation>Arc tangent point is not selected</translation>
824 <name>SketchArc:ArcCenter</name>
826 <source>Attribute "%1" is locked by modification value in the viewer.</source>
827 <translation>Select a center point</translation>
831 <name>SketchArc:ArcCenter</name>
833 <source>Attribute "%1" is not initialized.</source>
834 <translation>Center point is not defined</translation>
838 <name>SketchArc:ArcEndPoint</name>
840 <source>Attribute "%1" is locked by modification value in the viewer.</source>
841 <translation>Select an end point</translation>
845 <name>SketchArc:ArcPassedPoint</name>
847 <source>Attribute "%1" is locked by modification value in the viewer.</source>
848 <translation>Select an intermediate point</translation>
852 <name>SketchArc:ArcStartPoint</name>
854 <source>Attribute "%1" is locked by modification value in the viewer.</source>
855 <translation>Select a start point</translation>
859 <name>SketchArc:GeomValidators_Different</name>
861 <source>Attributes ArcCenter and ArcStartPoint are equal.</source>
862 <translation>Center point and end point must be different</translation>
866 <name>SketchArc:GeomValidators_Different</name>
868 <source>Attributes ArcStartPoint and ArcEndPoint are equal.</source>
869 <translation>Start point and end point must be different</translation>
873 <name>SketchArc:Model_FeatureValidator</name>
875 <source>Attribute "%1" is not initialized.</source>
876 <translation>End point is not defined</translation>
880 <name>SketchArc:Model_FeatureValidator</name>
882 <source>Attribute "%1" is not initialized.</source>
883 <translation>Intermediate point is not defined</translation>
887 <name>SketchArc:ArcRadius:GeomValidators_Positive</name>
889 <source>Value is too small.</source>
890 <translation>Arc radius is too small</translation>
894 <name>SketchArc:ArcRadius:GeomValidators_Positive</name>
896 <source>Integer is not initialized.</source>
897 <translation>Integer arc radius must be set</translation>
901 <name>SketchArc:ArcRadius:GeomValidators_Positive</name>
903 <source>Integer is not positive.</source>
904 <translation>Integer arc radius must be positive</translation>
908 <name>SketchArc:Model_FeatureValidator</name>
910 <source>Attribute "%1" is not initialized.</source>
911 <translation>Select an arc center</translation>
915 <name>SketchArc:Model_FeatureValidator:ArcStartPoint</name>
917 <source>Attribute "%1" is not initialized.</source>
918 <translation>Select an arc start point</translation>
922 <name>SketchArc:Model_FeatureValidator</name>
924 <source>Attribute "%1" is not initialized.</source>
925 <translation>Select an arc end point</translation>
929 <name>SketchArc:Model_FeatureValidator</name>
931 <source>Attribute "%1" is not initialized.</source>
932 <translation>Select an arc passed point</translation>
936 <name>SketchArc:Model_FeatureValidator</name>
938 <source>Attribute "%1" is not initialized.</source>
939 <translation>Select an arc tangent point</translation>
943 <name>SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType</name>
945 <source>The object is empty</source>
946 <translation>Line is not selected</translation>
950 <name>SketchConstraintMirror:Model_FeatureValidator</name>
952 <source>Attribute "%1" is not initialized.</source>
953 <translation>Mirror line is not selected</translation>
957 <name>SketchConstraintMirror:Model_FeatureValidator</name>
959 <source>Attribute "%1" is not initialized.</source>
960 <translation>Objects for mirror are not selected</translation>
964 <name>SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType</name>
966 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
967 <translation>The mirror line references to not acceptable shape type. The type should be: %1</translation>
971 <name>SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType</name>
973 <source>It has reference to an empty attribute</source>
974 <translation>The mirror line refers to nothing</translation>
978 <name>SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType</name>
980 <source>Shape type is "%1", it should be "%2"</source>
981 <translation>The mirror line refers to %1 but must be %2</translation>
985 <name>SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType</name>
987 <source>The attribute with the %1 type is not processed</source>
988 <translation>The mirror line of type %1 is not supported</translation>
992 <name>SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType</name>
994 <source>The result is empty</source>
995 <translation>The mirror line refers to not existing item</translation>
999 <name>SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType</name>
1001 <source>The shape is empty</source>
1002 <translation>The mirror line refers to the empty shape</translation>
1007 <name>SketchMultiRotation:Model_FeatureValidator</name>
1009 <source>Attribute "%1" is not initialized.</source>
1010 <translation>Type of angle is not defined</translation>
1014 <name>SketchMultiRotation:Model_FeatureValidator</name>
1016 <source>Attribute "%1" is not initialized.</source>
1017 <translation>Rotation center is not selected</translation>
1021 <name>SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType</name>
1023 <source>The object is empty</source>
1024 <translation>Rotation center is not selected</translation>
1028 <name>SketchMultiRotation:MultiRotationObjects:GeomValidators_Positive</name>
1030 <source>Double is not initialized.</source>
1031 <translation>The total number of rotated objects is not set</translation>
1035 <name>SketchMultiRotation:MultiRotationObjects:GeomValidators_Positive</name>
1037 <source>Value is too small.</source>
1038 <translation>The total number of rotated objects must be positive</translation>
1042 <name>SketchMultiRotation:MultiRotationObjects:GeomValidators_Positive</name>
1044 <source>Integer is not initialized.</source>
1045 <translation>The total number of rotated objects is not set</translation>
1049 <name>SketchMultiRotation:MultiRotationObjects:GeomValidators_Positive</name>
1051 <source>Integer is not positive.</source>
1052 <translation>The total number of rotated objects must be positive</translation>
1056 <name>SketchMultiRotation:Model_FeatureValidator</name>
1058 <source>Attribute "%1" is not initialized.</source>
1059 <translation>Select objects to rotate</translation>
1063 <name>SketchMultiRotation:Model_FeatureValidator</name>
1065 <source>Attribute "%1" is not initialized.</source>
1066 <translation>Set rotation angle</translation>
1070 <name>SketchMultiRotation:Model_FeatureValidator</name>
1072 <source>Attribute "%1" is not initialized.</source>
1073 <translation>Set the number of resulting objects</translation>
1077 <name>SketchMultiRotation:MultiRotationList:SketchPlugin_CopyValidator</name>
1079 <source>The attribute with the %1 type is not processed</source>
1080 <translation>The attribute with the %1 type is not processed</translation>
1084 <name>SketchMultiRotation:MultiRotationList:SketchPlugin_CopyValidator</name>
1086 <source>The object %1 is a result of copy</source>
1087 <translation>The object %1 is a result of copy and can not be rotated</translation>
1091 <name>SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType</name>
1093 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1094 <translation>Shape type must be %1</translation>
1098 <name>SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType</name>
1100 <source>It has reference to an empty attribute</source>
1101 <translation>The rotation center refers to nothing</translation>
1105 <name>SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType</name>
1107 <source>Shape type is "%1", it should be "%2"</source>
1108 <translation>The rotation center shape type is "%1", it should be "%2"</translation>
1112 <name>SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType</name>
1114 <source>The attribute with the %1 type is not processed</source>
1115 <translation>The attribute with the %1 type is not processed</translation>
1119 <name>SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType</name>
1121 <source>The result is empty</source>
1122 <translation>The rotation center refers to not existing item</translation>
1126 <name>SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType</name>
1128 <source>The shape is empty</source>
1129 <translation>The rotation center refers to the empty shape</translation>
1134 <name>SketchMultiTranslation:Model_FeatureValidator</name>
1136 <source>Attribute "%1" is not initialized.</source>
1137 <translation>End point of translation vector is not defined</translation>
1141 <name>SketchMultiTranslation:Model_FeatureValidator</name>
1143 <source>Attribute "%1" is not initialized.</source>
1144 <translation>Objects for translation are not selected</translation>
1148 <name>SketchMultiTranslation:GeomValidators_ShapeType</name>
1150 <source>The object is empty</source>
1151 <translation>End point of translation vector is not selected</translation>
1155 <name>SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType</name>
1157 <source>The object is empty</source>
1158 <translation>Start point of translation vector is not selected</translation>
1163 <name>SketchMultiTranslation:MultiTranslationObjects:GeomValidators_Positive</name>
1165 <source>Double is not initialized.</source>
1166 <translation>The total number of translated objects is not set</translation>
1170 <name>SketchMultiTranslation:MultiTranslationObjects:GeomValidators_Positive</name>
1172 <source>Value is too small.</source>
1173 <translation>The total number of translated objects must be positive</translation>
1177 <name>SketchMultiTranslation:MultiTranslationObjects:GeomValidators_Positive</name>
1179 <source>Integer is not initialized.</source>
1180 <translation>The total number of translated objects is not set</translation>
1184 <name>SketchMultiTranslation:MultiTranslationObjects:GeomValidators_Positive</name>
1186 <source>Integer is not positive.</source>
1187 <translation>The total number of translated objects must be positive</translation>
1192 <name>SketchMultiTranslation:Model_FeatureValidator</name>
1194 <source>Attribute "%1" is not initialized.</source>
1195 <translation>Select a start point</translation>
1199 <name>SketchMultiTranslation:Model_FeatureValidator</name>
1201 <source>Attribute "%1" is not initialized.</source>
1202 <translation>Select a total number of objects</translation>
1206 <name>SketchMultiTranslation:MultiTranslationList:SketchPlugin_CopyValidator</name>
1208 <source>The attribute with the %1 type is not processed</source>
1209 <translation>The attribute with the %1 type is not processed</translation>
1213 <name>SketchMultiTranslation:MultiTranslationList:SketchPlugin_CopyValidator</name>
1215 <source>The object %1 is a result of copy</source>
1216 <translation>The object %1 is a result of copy and can not be translated</translation>
1220 <name>SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType</name>
1222 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1223 <translation>Shape type must be %1</translation>
1227 <name>SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType</name>
1229 <source>It has reference to an empty attribute</source>
1230 <translation>The translation start point refers to nothing</translation>
1234 <name>SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType</name>
1236 <source>Shape type is "%1", it should be "%2"</source>
1237 <translation>The translation start point shape type is "%1", it should be "%2"</translation>
1241 <name>SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType</name>
1243 <source>The attribute with the %1 type is not processed</source>
1244 <translation>The attribute with the %1 type is not processed</translation>
1248 <name>SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType</name>
1250 <source>The object is empty</source>
1251 <translation>Select a start point</translation>
1255 <name>SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType</name>
1257 <source>The result is empty</source>
1258 <translation>The start point refers to not existing item</translation>
1262 <name>SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType</name>
1264 <source>The shape is empty</source>
1265 <translation>The start point refers to the empty shape</translation>
1269 <name>SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType</name>
1271 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1272 <translation>Shape type must be %1</translation>
1276 <name>SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType</name>
1278 <source>It has reference to an empty attribute</source>
1279 <translation>The translation end point refers to nothing</translation>
1283 <name>SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType</name>
1285 <source>Shape type is "%1", it should be "%2"</source>
1286 <translation>The translation end point shape type is "%1", it should be "%2"</translation>
1290 <name>SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType</name>
1292 <source>The attribute with the %1 type is not processed</source>
1293 <translation>The attribute with the %1 type is not processed</translation>
1297 <name>SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType</name>
1299 <source>The object is empty</source>
1300 <translation>Select an end point</translation>
1304 <name>SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType</name>
1306 <source>The result is empty</source>
1307 <translation>The end point refers to not existing item</translation>
1311 <name>SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType</name>
1313 <source>The shape is empty</source>
1314 <translation>The end point refers to the empty shape</translation>
1319 <name>SketchConstraintAngle:ConstraintFlyoutValuePnt</name>
1321 <source>Attribute "ConstraintFlyoutValuePnt" is locked by modification value in the viewer.</source>
1322 <translation>Flyout value point is not clicked in the viewer</translation>
1326 <name>SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType</name>
1328 <source>The object is empty</source>
1329 <translation>First object is not selected</translation>
1333 <name>SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType</name>
1335 <source>The object is empty</source>
1336 <translation>Second object is not selected</translation>
1340 <name>SketchConstraintAngle:ConstraintEntityB:SketchPlugin_ExternalValidator</name>
1342 <source>Both features, attribute and attribute in parameter, are external.</source>
1343 <translation>An angle can not be created between two external objects</translation>
1347 <name>SketchConstraintAngle:Model_FeatureValidator</name>
1349 <source>Attribute "%1" is not initialized.</source>
1350 <translation>First object is not selected</translation>
1354 <name>SketchConstraintAngle:Model_FeatureValidator</name>
1356 <source>Attribute "%1" is not initialized.</source>
1357 <translation>Second object is not selected</translation>
1361 <name>SketchConstraintAngle:Model_FeatureValidator</name>
1363 <source>Attribute "%1" is not initialized.</source>
1364 <translation>Set the angle value</translation>
1368 <name>SketchConstraintAngle:Model_FeatureValidator</name>
1370 <source>Attribute "%1" is not initialized.</source>
1371 <translation>Type of angle is not set</translation>
1375 <name>SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType</name>
1377 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1378 <translation>Shape type must be %1</translation>
1382 <name>SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType</name>
1384 <source>It has reference to an empty attribute</source>
1385 <translation>The first object refers to nothing</translation>
1389 <name>SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType</name>
1391 <source>Shape type is "%1", it should be "%2"</source>
1392 <translation>The first object shape type is "%1", it should be "%2"</translation>
1396 <name>SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType</name>
1398 <source>The attribute with the %1 type is not processed</source>
1399 <translation>The attribute with the %1 type is not processed</translation>
1403 <name>SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType</name>
1405 <source>The result is empty</source>
1406 <translation>The constraint argument refers to not existing item</translation>
1410 <name>SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType</name>
1412 <source>The shape is empty</source>
1413 <translation>The constraint argument refers to the empty shape</translation>
1417 <name>SketchConstraintAngle:ConstraintEntityA:SketchPlugin_ExternalValidator</name>
1419 <source>Both features, attribute and attribute in parameter, are external.</source>
1420 <translation>Angle can not be created on two external entities</translation>
1424 <name>SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType</name>
1426 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1427 <translation>Shape type must be %1</translation>
1431 <name>SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType</name>
1433 <source>It has reference to an empty attribute</source>
1434 <translation>The second object refers to nothing</translation>
1438 <name>SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType</name>
1440 <source>Shape type is "%1", it should be "%2"</source>
1441 <translation>The second object shape type is "%1", it should be "%2"</translation>
1445 <name>SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType</name>
1447 <source>The attribute with the %1 type is not processed</source>
1448 <translation>The attribute with the %1 type is not processed</translation>
1452 <name>SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType</name>
1454 <source>The result is empty</source>
1455 <translation>The constraint argument refers to not existing item</translation>
1459 <name>SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType</name>
1461 <source>The shape is empty</source>
1462 <translation>The constraint argument refers to the empty shape</translation>
1467 <name>SketchConstraintCoincidence:ConstraintEntityA:PartSet_DifferentObjects</name>
1469 <source>The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes.</source>
1470 <translation>Different objects should be selected</translation>
1474 <name>SketchConstraintCoincidence:ConstraintEntityB:PartSet_DifferentObjects</name>
1476 <source>The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes.</source>
1477 <translation>Different objects should be selected</translation>
1481 <name>SketchConstraintCoincidence:Model_FeatureValidator</name>
1483 <source>Attribute "%1" is not initialized.</source>
1484 <translation>First object is not selected</translation>
1488 <name>SketchConstraintCoincidence:Model_FeatureValidator</name>
1490 <source>Attribute "%1" is not initialized.</source>
1491 <translation>Second object is not selected</translation>
1495 <name>SketchConstraintCoincidence:ConstraintEntityB:SketchPlugin_ExternalValidator</name>
1497 <source>Both features, attribute and attribute in parameter, are external.</source>
1498 <translation>A coincidence can not be created between two external objects</translation>
1502 <name>SketchConstraintCoincidence:ConstraintEntityA:SketchPlugin_ExternalValidator</name>
1504 <source>Both features, attribute and attribute in parameter, are external.</source>
1505 <translation>A coincidence can not be created between two external objects</translation>
1510 <name>SketchConstraintDistance:ConstraintFlyoutValuePnt</name>
1512 <source>Attribute "ConstraintFlyoutValuePnt" is locked by modification value in the viewer.</source>
1513 <translation>Flyout value point is not clicked in the viewer</translation>
1517 <name>SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType</name>
1519 <source>The object is empty</source>
1520 <translation>First object is not selected</translation>
1524 <name>SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType</name>
1526 <source>The object is empty</source>
1527 <translation>Second object is not selected</translation>
1531 <name>SketchConstraintDistance:ConstraintValue:GeomValidators_Positive</name>
1533 <source>Double is not initialized.</source>
1534 <translation>Distance value must be set</translation>
1538 <name>SketchConstraintDistance:Model_FeatureValidator</name>
1540 <source>Attribute "%1" is not initialized.</source>
1541 <translation>First object is not selected</translation>
1545 <name>SketchConstraintDistance:Model_FeatureValidator</name>
1547 <source>Attribute "%1" is not initialized.</source>
1548 <translation>Second object is not selected</translation>
1552 <name>SketchConstraintDistance:ConstraintValue:GeomValidators_Positive</name>
1554 <source>Value is too small.</source>
1555 <translation>Distance value is too small</translation>
1559 <name>SketchConstraintDistance:ConstraintValue:GeomValidators_Positive</name>
1561 <source>Integer is not initialized.</source>
1562 <translation>Integer distance value must be set</translation>
1566 <name>SketchConstraintDistance:ConstraintValue:GeomValidators_Positive</name>
1568 <source>Integer is not positive.</source>
1569 <translation>Integer distance value must be positive</translation>
1573 <name>SketchConstraintDistance:Model_FeatureValidator</name>
1575 <source>Attribute "%1" is not initialized.</source>
1576 <translation>First object is not selected</translation>
1580 <name>SketchConstraintDistance:Model_FeatureValidator</name>
1582 <source>Attribute "%1" is not initialized.</source>
1583 <translation>Second object is not selected</translation>
1587 <name>SketchConstraintDistance:Model_FeatureValidator</name>
1589 <source>Attribute "%1" is not initialized.</source>
1590 <translation>Set the distance</translation>
1594 <name>SketchConstraintDistance:ConstraintEntityA:SketchPlugin_ExternalValidator</name>
1596 <source>Both features, attribute and attribute in parameter, are external.</source>
1597 <translation>Distance can not be set between two external objects</translation>
1601 <name>SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType</name>
1603 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1604 <translation>Shape type must be %1</translation>
1608 <name>SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType</name>
1610 <source>It has reference to an empty attribute</source>
1611 <translation>The first object refers to nothing</translation>
1615 <name>SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType</name>
1617 <source>Shape type is "%1", it should be "%2"</source>
1618 <translation>The first object shape type is "%1", it should be "%2"</translation>
1622 <name>SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType</name>
1624 <source>The attribute with the %1 type is not processed</source>
1625 <translation>The attribute with the %1 type is not processed</translation>
1629 <name>SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType</name>
1631 <source>The result is empty</source>
1632 <translation>The constraint argument refers to not existing item</translation>
1636 <name>SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType</name>
1638 <source>The shape is empty</source>
1639 <translation>The constraint argument refers to the empty shape</translation>
1643 <name>SketchConstraintDistance:ConstraintEntityB:SketchPlugin_ExternalValidator</name>
1645 <source>Both features, attribute and attribute in parameter, are external.</source>
1646 <translation>Distance can not be set between two external objects</translation>
1650 <name>SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType</name>
1652 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1653 <translation>Shape type must be %1</translation>
1657 <name>SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType</name>
1659 <source>It has reference to an empty attribute</source>
1660 <translation>The second object refers to nothing</translation>
1664 <name>SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType</name>
1666 <source>Shape type is "%1", it should be "%2"</source>
1667 <translation>The second object shape type is "%1", it should be "%2"</translation>
1671 <name>SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType</name>
1673 <source>The attribute with the %1 type is not processed</source>
1674 <translation>The attribute with the %1 type is not processed</translation>
1678 <name>SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType</name>
1680 <source>The result is empty</source>
1681 <translation>The constraint argument refers to not existing item</translation>
1685 <name>SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType</name>
1687 <source>The shape is empty</source>
1688 <translation>The constraint argument refers to the empty shape</translation>
1693 <name>SketchConstraintEqual:ConstraintEntityA:PartSet_DifferentObjects</name>
1695 <source>The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes.</source>
1696 <translation>Different objects should be selected</translation>
1700 <name>SketchConstraintEqual:ConstraintEntityB:PartSet_DifferentObjects</name>
1702 <source>The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes.</source>
1703 <translation>Different objects should be selected</translation>
1707 <name>SketchConstraintEqual:ConstraintEntityB:SketchPlugin_EqualAttr</name>
1709 <source>An empty object is used.</source>
1710 <translation>An empty object is used</translation>
1713 <source>The %1 feature is not supported by the Equal constraint.</source>
1714 <translation>The %1 feature is not supported by the Equal constraint.</translation>
1717 <source>Features with kinds %1 and %2 can not be equal.</source>
1718 <translation>Features with kinds %1 and %2 can not be equal.</translation>
1722 <name>SketchConstraintEqual:Model_FeatureValidator</name>
1724 <source>Attribute "%1" is not initialized.</source>
1725 <translation>First object is not selected</translation>
1729 <name>SketchConstraintEqual:Model_FeatureValidator</name>
1731 <source>Attribute "%1" is not initialized.</source>
1732 <translation>Second object is not selected</translation>
1736 <name>SketchConstraintEqual:ConstraintEntityB:SketchPlugin_ExternalValidator</name>
1738 <source>Both features, attribute and attribute in parameter, are external.</source>
1739 <translation>An equality can not be set between two external objects</translation>
1743 <name>SketchConstraintEqual:ConstraintEntityA:SketchPlugin_ExternalValidator</name>
1745 <source>Both features, attribute and attribute in parameter, are external.</source>
1746 <translation>An equality can not be set between two external objects</translation>
1751 <name>SketchConstraintLength:ConstraintFlyoutValuePnt</name>
1753 <source>Attribute "ConstraintFlyoutValuePnt" is locked by modification value in the viewer.</source>
1754 <translation>Flyout value point is not clicked in the viewer</translation>
1758 <name>SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType</name>
1760 <source>The object is empty</source>
1761 <translation>Object is not selected</translation>
1765 <name>SketchConstraintLength:ConstraintValue:GeomValidators_Positive</name>
1767 <source>Double is not initialized.</source>
1768 <translation>Set the length value</translation>
1772 <name>SketchConstraintLength:Model_FeatureValidator</name>
1774 <source>Attribute "%1" is not initialized.</source>
1775 <translation>Line is not selected</translation>
1779 <name>SketchConstraintLength:ConstraintValue:GeomValidators_Positive</name>
1781 <source>Value is too small.</source>
1782 <translation>Length value is too small</translation>
1786 <name>SketchConstraintLength:ConstraintValue:GeomValidators_Positive</name>
1788 <source>Integer is not initialized.</source>
1789 <translation>Set the integer length value</translation>
1793 <name>SketchConstraintLength:ConstraintValue:GeomValidators_Positive</name>
1795 <source>Integer is not positive.</source>
1796 <translation>Integer length value is not positive</translation>
1801 <name>SketchConstraintLength:Model_FeatureValidator</name>
1803 <source>Attribute "%1" is not initialized.</source>
1804 <translation>Line is not selected</translation>
1808 <name>SketchConstraintLength:Model_FeatureValidator</name>
1810 <source>Attribute "%1" is not initialized.</source>
1811 <translation>Set the length value</translation>
1815 <name>SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType</name>
1817 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1818 <translation>Shape type must be %1</translation>
1822 <name>SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType</name>
1824 <source>It has reference to an empty attribute</source>
1825 <translation>The line refers to nothing</translation>
1829 <name>SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType</name>
1831 <source>Shape type is "%1", it should be "%2"</source>
1832 <translation>The line shape type is "%1", it should be "%2"</translation>
1836 <name>SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType</name>
1838 <source>The attribute with the %1 type is not processed</source>
1839 <translation>The attribute with the %1 type is not processed</translation>
1843 <name>SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType</name>
1845 <source>The result is empty</source>
1846 <translation>The constraint argument refers to not existing item</translation>
1850 <name>SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType</name>
1852 <source>The shape is empty</source>
1853 <translation>The constraint argument refers to the empty shape</translation>
1858 <name>SketchConstraintMiddle:ConstraintEntityA:PartSet_DifferentObjects</name>
1860 <source>The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes.</source>
1861 <translation>Different objects should be selected</translation>
1865 <name>SketchConstraintMiddle:ConstraintEntityB:PartSet_DifferentObjects</name>
1867 <source>The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes.</source>
1868 <translation>Different objects should be selected</translation>
1872 <name>SketchConstraintMiddle:ConstraintEntityB:SketchPlugin_MiddlePointAttr</name>
1874 <source>Middle point constraint allows points and lines only</source>
1875 <translation>Not point or line is selected</translation>
1879 <name>SketchConstraintMiddle:Model_FeatureValidator</name>
1881 <source>Attribute "%1" is not initialized.</source>
1882 <translation>First object is not selected</translation>
1886 <name>SketchConstraintMiddle:Model_FeatureValidator</name>
1888 <source>Attribute "%1" is not initialized.</source>
1889 <translation>Second object is not selected</translation>
1893 <name>SketchConstraintMiddle:ConstraintEntityB:SketchPlugin_ExternalValidator</name>
1895 <source>Both features, attribute and attribute in parameter, are external.</source>
1896 <translation>A middle can not be set for two external objects</translation>
1900 <name>SketchConstraintMiddle:ConstraintEntityA:SketchPlugin_ExternalValidator</name>
1902 <source>Both features, attribute and attribute in parameter, are external.</source>
1903 <translation>A middle can not be set for two external objects</translation>
1908 <name>SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType</name>
1910 <source>The object is empty</source>
1911 <translation>First object is not selected</translation>
1915 <name>SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType</name>
1917 <source>The object is empty</source>
1918 <translation>Second object is not selected</translation>
1922 <name>SketchConstraintParallel:Model_FeatureValidator</name>
1924 <source>Attribute "%1" is not initialized.</source>
1925 <translation>First line is not selected</translation>
1929 <name>SketchConstraintParallel:Model_FeatureValidator</name>
1931 <source>Attribute "%1" is not initialized.</source>
1932 <translation>Second line is not selected</translation>
1936 <name>SketchConstraintParallel:ConstraintEntityB:SketchPlugin_ExternalValidator</name>
1938 <source>Both features, attribute and attribute in parameter, are external.</source>
1939 <translation>A parallel can not be set between two external objects</translation>
1943 <name>SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType</name>
1945 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1946 <translation>Shape type must be %1</translation>
1950 <name>SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType</name>
1952 <source>It has reference to an empty attribute</source>
1953 <translation>The first line refers to nothing</translation>
1957 <name>SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType</name>
1959 <source>Shape type is "%1", it should be "%2"</source>
1960 <translation>The first line shape type is "%1", it should be "%2"</translation>
1964 <name>SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType</name>
1966 <source>The attribute with the %1 type is not processed</source>
1967 <translation>The attribute with the %1 type is not processed</translation>
1971 <name>SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType</name>
1973 <source>The result is empty</source>
1974 <translation>The constraint argument refers to not existing item</translation>
1978 <name>SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType</name>
1980 <source>The shape is empty</source>
1981 <translation>The constraint argument refers to the empty shape</translation>
1985 <name>SketchConstraintParallel:ConstraintEntityA:SketchPlugin_ExternalValidator</name>
1987 <source>Both features, attribute and attribute in parameter, are external.</source>
1988 <translation>A parallel can not be set between two external objects</translation>
1992 <name>SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType</name>
1994 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1995 <translation>Shape type must be %1</translation>
1999 <name>SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType</name>
2001 <source>It has reference to an empty attribute</source>
2002 <translation>The second line refers to nothing</translation>
2006 <name>SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType</name>
2008 <source>Shape type is "%1", it should be "%2"</source>
2009 <translation>The second line shape type is "%1", it should be "%2"</translation>
2013 <name>SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType</name>
2015 <source>The attribute with the %1 type is not processed</source>
2016 <translation>The attribute with the %1 type is not processed</translation>
2020 <name>SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType</name>
2022 <source>The result is empty</source>
2023 <translation>The constraint argument refers to not existing item</translation>
2027 <name>SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType</name>
2029 <source>The shape is empty</source>
2030 <translation>The constraint argument refers to the empty shape</translation>
2035 <name>SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType</name>
2037 <source>The object is empty</source>
2038 <translation>Object is not selected</translation>
2042 <name>SketchConstraintRigid:Model_FeatureValidator</name>
2044 <source>Attribute "%1" is not initialized.</source>
2045 <translation>Object is not selected</translation>
2049 <name>SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType</name>
2051 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
2052 <translation>The fixed constraint references to not acceptable shape type. The type should be: %1</translation>
2056 <name>SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType</name>
2058 <source>It has reference to an empty attribute</source>
2059 <translation>The fixed constraint refers to nothing</translation>
2063 <name>SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType</name>
2065 <source>Shape type is "%1", it should be "%2"</source>
2066 <translation>The fixed constraint refers to %1 but must be %2</translation>
2070 <name>SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType</name>
2072 <source>The attribute with the %1 type is not processed</source>
2073 <translation>The fixed constraint of type %1 is not supported</translation>
2077 <name>SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType</name>
2079 <source>The result is empty</source>
2080 <translation>The fixed constraint refers to not existing item</translation>
2084 <name>SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType</name>
2086 <source>The shape is empty</source>
2087 <translation>The fixed constraint refers to the empty shape</translation>
2092 <name>SketchConstraintTangent:ConstraintEntityA:PartSet_DifferentObjects</name>
2094 <source>The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes.</source>
2095 <translation>Different objects should be selected</translation>
2099 <name>SketchConstraintTangent:ConstraintEntityB:PartSet_DifferentObjects</name>
2101 <source>The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes.</source>
2102 <translation>Different objects should be selected</translation>
2106 <name>SketchConstraintTangent:ConstraintEntityA:SketchPlugin_TangentAttr</name>
2108 <source>Two segments cannot be tangent</source>
2109 <translation>Two segments cannot be tangent</translation>
2112 <source>Two B-splines cannot be tangent</source>
2113 <translation>Two B-splines cannot be tangent</translation>
2117 <name>SketchConstraintTangent:ConstraintEntityB:SketchPlugin_TangentAttr</name>
2119 <source>It uses an empty object</source>
2120 <translation>Selection is not valid</translation>
2124 <name>SketchConstraintTangent:Model_FeatureValidator</name>
2126 <source>Attribute "%1" is not initialized.</source>
2127 <translation>First object is not selected</translation>
2131 <name>SketchConstraintTangent:Model_FeatureValidator</name>
2133 <source>Attribute "%1" is not initialized.</source>
2134 <translation>Second object is not selected</translation>
2139 <name>SketchConstraintSplit:ConstraintEntityA:SketchPlugin_SplitValidator</name>
2141 <source>The attribute with the %1 type is not processed</source>
2142 <translation>Only attribute selection can be used for the sketch face, not %1</translation>
2147 <name>SketchFillet:ConstraintValue:GeomValidators_Positive</name>
2149 <source>Double is not initialized.</source>
2150 <translation>Set the fillet radius</translation>
2154 <name>SketchFillet:ConstraintValue:GeomValidators_Positive</name>
2156 <source>Value is too small.</source>
2157 <translation>The fillet radius must be positive</translation>
2161 <name>SketchFillet:ConstraintValue:GeomValidators_Positive</name>
2163 <source>Integer is not initialized.</source>
2164 <translation>Set the integer fillet radius</translation>
2168 <name>SketchFillet:ConstraintValue:GeomValidators_Positive</name>
2170 <source>Integer is not positive.</source>
2171 <translation>The integer fillet radius must be positive</translation>
2175 <name>SketchFillet:Model_FeatureValidator</name>
2177 <source>Attribute "%1" is not initialized.</source>
2178 <translation>Select one or several points for filet</translation>
2182 <name>SketchFillet:Model_FeatureValidator</name>
2184 <source>Attribute "%1" is not initialized.</source>
2185 <translation>Set the fillet radius</translation>
2189 <name>SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator</name>
2191 <source>Error: List of points is empty.</source>
2192 <translation>List of points is empty</translation>
2196 <name>SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator</name>
2198 <source>Error: one of the selected point does not have coincidence.</source>
2199 <translation>One of the selected point does not have coincidence</translation>
2203 <name>SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator</name>
2205 <source>Error: One of the selected points does not have two suitable edges for fillet.</source>
2206 <translation>One of the selected points does not have two suitable edges for fillet</translation>
2210 <name>SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator</name>
2212 <source>Error: Edges in selected point has tangent constraint.</source>
2213 <translation>Edges in selected point has tangent constraint</translation>
2217 <name>SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator</name>
2219 <source>Error: Edges in selected point has tangent constraint.</source>
2220 <translation>Edges in selected point has tangent constraint</translation>
2225 <name>SketchProjection:ExternalFeature:SketchPlugin_ProjectionValidator</name>
2227 <source>The attribute with the %1 type is not processed</source>
2228 <translation>An argument of type %1 of the projection feature is not supported</translation>
2231 <source>The attribute %1 should be an edge or vertex</source>
2232 <translation>The projected item must be an edge or a vertex</translation>
2235 <source>There is no sketch referring to the current feature</source>
2236 <translation>The projection feature has no sketch</translation>
2239 <source>Unable to project feature from the same sketch</source>
2240 <translation>Feature from the current sketch cannot be projected</translation>
2243 <source>Error: Line is orthogonal to the sketch plane.</source>
2244 <translation>Error: Line is orthogonal to the sketch plane.</translation>
2247 <source>Error: Circle is orthogonal to the sketch plane.</source>
2248 <translation>Error: Circle is orthogonal to the sketch plane.</translation>
2251 <source>Error: Arc is orthogonal to the sketch plane.</source>
2252 <translation>Error: Arc is orthogonal to the sketch plane.</translation>
2255 <source>Error: Ellipse is orthogonal to the sketch plane.</source>
2256 <translation>Error: Ellipse is orthogonal to the sketch plane.</translation>
2259 <source>Error: Elliptic Arc is orthogonal to the sketch plane.</source>
2260 <translation>Error: Elliptic Arc is orthogonal to the sketch plane.</translation>
2263 <source>Error: Selected object is not supported for projection.</source>
2264 <translation>Error: Selected object is not supported for projection.</translation>
2268 <name>SketchProjection:Model_FeatureValidator</name>
2270 <source>Attribute "%1" is not initialized.</source>
2271 <translation></translation>
2275 <!-- SketchCurveFitting -->
2277 <name>SketchCurveFitting</name>
2279 <source>Curve fitting</source>
2280 <translation>Curve fitting</translation>
2283 <source>Create curve passing through the points</source>
2284 <translation>Create curve passing through the points</translation>
2287 <source>Error: Feature "%1" does not support action "%2".</source>
2288 <translation>Error: Feature "%1" does not support action "%2".</translation>
2292 <name>SketchCurveFitting:SketchPlugin_CurveFittingValidator</name>
2294 <source>Not enough points selected. Need at least %1 points.</source>
2295 <translation>Not enough points selected. Need at least %1 points.</translation>
2299 <name>SketchCurveFitting:points</name>
2301 <source>Points</source>
2302 <translation>Points</translation>
2305 <source>Select points for curve fitting</source>
2306 <translation>Select points for curve fitting</translation>
2309 <source>Attribute "%1" is not initialized.</source>
2310 <translation>Select points for interpolation</translation>
2314 <name>SketchCurveFitting:periodic</name>
2316 <source>Periodic</source>
2317 <translation>Periodic</translation>
2320 <source>Make curve periodic</source>
2321 <translation>Make curve periodic</translation>
2325 <name>SketchCurveFitting:closed</name>
2327 <source>Closed</source>
2328 <translation>Closed</translation>
2331 <source>Make curve closed, but not periodic</source>
2332 <translation>Make curve closed, but not periodic</translation>
2336 <name>SketchCurveFitting:type</name>
2338 <source>Interpolation</source>
2339 <translation>Interpolation</translation>
2342 <source>Approximation</source>
2343 <translation>Approximation</translation>
2347 <name>SketchCurveFitting:precision</name>
2349 <source>Precision</source>
2350 <translation>Precision</translation>
2353 <source>Maximal distance from selected points to the curve</source>
2354 <translation>Maximal distance from selected points to the curve</translation>
2358 <name>SketchCurveFitting:need_control_poly</name>
2360 <source>Create control polygon</source>
2361 <translation>Create control polygon</translation>
2364 <source>Specify if the control polygon should be created</source>
2365 <translation>Specify if the control polygon should be created</translation>
2369 <name>SketchCurveFitting:reorder_points</name>
2371 <source>Reorder points</source>
2372 <translation>Reorder points</translation>
2375 <source>Sort selected points to minimize the distance heighbors</source>
2376 <translation>Sort selected points to minimize the distance heighbors</translation>
2380 <name>SketchCurveFitting:Auxiliary</name>
2382 <source>Auxiliary</source>
2383 <translation>Auxiliary</translation>
2386 <source>Construction element</source>
2387 <translation>Construction element</translation>