1 <?xml version="1.0" encoding="utf-8"?>
3 <TS version="2.0" language="en_US">
5 <name>Sketch:Model_FeatureValidator</name>
7 <source>Attribute "%1" is not initialized.</source>
8 <translation>Select a plane for the sketch</translation>
12 <name>Sketch:Model_FeatureValidator</name>
14 <source>Attribute "%1" is not initialized.</source>
15 <translation>Sketch objects are not defined</translation>
19 <name>Sketch:External:GeomValidators_Face</name>
21 <source>The attribute with the %1 type is not processed</source>
22 <translation>Only attribute selection can be used for the sketch face, not %1</translation>
26 <name>Sketch:External:GeomValidators_Face</name>
28 <source>The shape is not a face.</source>
29 <translation>Sketch can be created only on a face</translation>
33 <name>Sketch:External:GeomValidators_Face</name>
35 <source>The shape is not a plane.</source>
36 <translation>Sketch can be created only on a planar face</translation>
40 <name>Sketch:External:GeomValidators_Face</name>
42 <source>The shape is not a cylinder.</source>
43 <translation>Sketch can be created only on a cylindrical face</translation>
47 <name>Sketch:External:GeomValidators_Face</name>
49 <source>The shape is not an available face.</source>
50 <translation>Sketch cannot be created on the selected face</translation>
54 <name>Sketch:Model_FeatureValidator</name>
56 <source>Attribute "%1" is not initialized.</source>
57 <translation>Select the sketch plane</translation>
61 <name>Sketch:Model_FeatureValidator</name>
63 <source>Attribute "%1" is not initialized.</source>
64 <translation>Can not compute degrees of freedom</translation>
68 <name>Sketch:Model_FeatureValidator</name>
70 <source>Attribute "%1" is not initialized.</source>
71 <translation>Can not compute the solver error</translation>
76 <name>SketchMacroCircle:center_point</name>
78 <source>Attribute "%1" is locked by modification value in the viewer.</source>
79 <translation>Select a point in the viewer</translation>
82 <source>Attribute "%1" is not initialized.</source>
83 <translation>Select a point in the viewer</translation>
87 <name>SketchMacroCircle:passed_point</name>
89 <source>Attribute "%1" is locked by modification value in the viewer.</source>
90 <translation>Select a point in the viewer</translation>
94 <name>SketchMacroCircle:CircleRadius:GeomValidators_Positive</name>
96 <source>Value is too small.</source>
97 <translation>Radius value is too small</translation>
101 <name>SketchMacroCircle:Model_FeatureValidator</name>
103 <source>Attribute "%1" is not initialized.</source>
104 <translation>A center point is not selected</translation>
108 <name>SketchMacroCircle:Model_FeatureValidator</name>
110 <source>Attribute "%1" is not initialized.</source>
111 <translation>A first point is not selected</translation>
115 <name>SketchMacroCircle:Model_FeatureValidator</name>
117 <source>Attribute "%1" is not initialized.</source>
118 <translation>A second point is not selected</translation>
122 <name>SketchMacroCircle:Model_FeatureValidator</name>
124 <source>Attribute "%1" is not initialized.</source>
125 <translation>A third point is not selected</translation>
129 <name>SketchMacroCircle:CircleCenter</name>
131 <source>Attribute "circle_center" is locked by modification value in the viewer.</source>
132 <translation>Select a center point</translation>
136 <name>SketchMacroCircle:FirstPoint</name>
138 <source>Attribute "FirstPoint" is locked by modification value in the viewer.</source>
139 <translation>Select a center point</translation>
143 <name>SketchMacroCircle:SecondPoint</name>
145 <source>Attribute "SecondPoint" is locked by modification value in the viewer.</source>
146 <translation>Select a center point</translation>
150 <name>SketchMacroCircle:ThirdPoint</name>
152 <source>Attribute "ThirdPoint" is locked by modification value in the viewer.</source>
153 <translation>Select a center point</translation>
157 <name>SketchMacroCircle:CircleRadius</name>
159 <source>Attribute "circle_radius" is locked by modification value in the viewer.</source>
160 <translation>Select a radius distance</translation>
164 <name>SketchMacroCircle:CircleRadius:GeomValidators_Positive</name>
166 <source>Integer is not initialized.</source>
167 <translation>Integer radius is not initialized</translation>
171 <name>SketchMacroCircle:CircleRadius:GeomValidators_Positive</name>
173 <source>Integer is not positive.</source>
174 <translation>Integer radius must be set</translation>
178 <name>SketchMacroCircle:Model_FeatureValidator</name>
180 <source>Attribute "%1" is not initialized.</source>
181 <translation>Set the circle radius</translation>
186 <name>SketchMacroArc:Model_FeatureValidator</name>
188 <source>Attribute "%1" is not initialized.</source>
189 <translation>Select a point.</translation>
193 <name>SketchMacroArc:center_point</name>
195 <source>Attribute "%1" is locked by modification value in the viewer.</source>
196 <translation>Select a center point.</translation>
200 <name>SketchMacroArc:end_point_1</name>
202 <source>Attribute "%1" is locked by modification value in the viewer.</source>
203 <translation>Select an end point in the viewer.</translation>
207 <name>SketchMacroArc:end_point_2</name>
209 <source>Attribute "%1" is locked by modification value in the viewer.</source>
210 <translation>Select an end point in the viewer.</translation>
214 <name>SketchMacroArc:end_point_3</name>
216 <source>Attribute "%1" is locked by modification value in the viewer.</source>
217 <translation>Select an end point in the viewer.</translation>
220 <source>Attribute "%1" is not initialized.</source>
221 <translation>Select an end point in the viewer.</translation>
225 <name>SketchMacroArc:passed_point</name>
227 <source>Attribute "%1" is locked by modification value in the viewer.</source>
228 <translation>Select an passed point in the viewer.</translation>
232 <name>SketchMacroArc:start_point_1</name>
234 <source>Attribute "%1" is locked by modification value in the viewer.</source>
235 <translation>Select a start point.</translation>
239 <name>SketchMacroArc:start_point_2</name>
241 <source>Attribute "%1" is locked by modification value in the viewer.</source>
242 <translation>Select a start point.</translation>
247 <name>SketchMacroEllipse:Model_FeatureValidator</name>
249 <source>Attribute "%1" is not initialized.</source>
250 <translation>Select a point.</translation>
254 <name>SketchMacroEllipse:first_point</name>
256 <source>Attribute "%1" is locked by modification value in the viewer.</source>
257 <translation>Select a first point in the viewer.</translation>
261 <name>SketchMacroEllipse:passed_point</name>
263 <source>Attribute "%1" is locked by modification value in the viewer.</source>
264 <translation>Select a passed point.</translation>
268 <name>SketchMacroEllipse:second_point</name>
270 <source>Attribute "%1" is locked by modification value in the viewer.</source>
271 <translation>Select a second point.</translation>
276 <name>SketchSplit:Model_FeatureValidator</name>
278 <source>Attribute "%1" is not initialized.</source>
279 <translation>Select a segment to split in the viewer.</translation>
283 <name>SketchSplit:SelectedObject:SketchPlugin_SplitValidator</name>
285 <source>Select a segment to split in the viewer.</source>
286 <translation></translation>
291 <name>SketchConstraintHorizontal:Model_FeatureValidator</name>
293 <source>Attribute "%1" is not initialized.</source>
294 <translation>Line is not selected</translation>
298 <name>SketchConstraintHorizontal</name>
300 <source>ModelAPI_StateInvalidArgument</source>
301 <translation>Wrong object is selected</translation>
305 <name>SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType</name>
307 <source>The object is empty</source>
308 <translation>Line is not selected</translation>
312 <name>SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType</name>
314 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
315 <translation>The constraint argument does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
319 <name>SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType</name>
321 <source>It has reference to an empty attribute</source>
322 <translation>The constraint argument refers to nothing</translation>
326 <name>SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType</name>
328 <source>Shape type is "%1", it should be "%2"</source>
329 <translation>The constraint argument refers to %1 but must be %2</translation>
333 <name>SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType</name>
335 <source>The attribute with the %1 type is not processed</source>
336 <translation>The constraint argument of type %1 is not supported</translation>
340 <name>SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType</name>
342 <source>The result is empty</source>
343 <translation>The constraint argument refers to not existing item</translation>
347 <name>SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType</name>
349 <source>The shape is empty</source>
350 <translation>The constraint argument refers to the empty shape</translation>
355 <name>SketchConstraintPerpendicular:Model_FeatureValidator</name>
357 <source>Attribute "%1" is not initialized.</source>
358 <translation>First line is not selected</translation>
362 <name>SketchConstraintPerpendicular:Model_FeatureValidator</name>
364 <source>Attribute "%1" is not initialized.</source>
365 <translation>Second line is not selected</translation>
369 <name>SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType</name>
371 <source>The object is empty</source>
372 <translation>First line is not selected</translation>
376 <name>SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType</name>
378 <source>The object is empty</source>
379 <translation>Second line is not selected</translation>
383 <name>SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType</name>
385 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
386 <translation>The second line references to not acceptable shape type. The type should be: %1</translation>
390 <name>SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType</name>
392 <source>It has reference to an empty attribute</source>
393 <translation>The second line refers to nothing</translation>
397 <name>SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType</name>
399 <source>Shape type is "%1", it should be "%2"</source>
400 <translation>The second line refers to %1 but must be %2</translation>
404 <name>SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType</name>
406 <source>The attribute with the %1 type is not processed</source>
407 <translation>The second line of type %1 is not supported</translation>
411 <name>SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType</name>
413 <source>The result is empty</source>
414 <translation>The second line refers to not existing item</translation>
418 <name>SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType</name>
420 <source>The shape is empty</source>
421 <translation>The second line refers to the empty shape</translation>
425 <name>SketchConstraintPerpendicular:ConstraintEntityA:SketchPlugin_ExternalValidator</name>
427 <source>Both features, attribute and attribute in parameter, are external.</source>
428 <translation>Two external lines can not be constrained as perpendicular</translation>
432 <name>SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType</name>
434 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
435 <translation>Shape type must be %1</translation>
439 <name>SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType</name>
441 <source>It has reference to an empty attribute</source>
442 <translation>The first line refers to nothing</translation>
446 <name>SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType</name>
448 <source>Shape type is "%1", it should be "%2"</source>
449 <translation>The first line shape type is "%1", it should be "%2"</translation>
453 <name>SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType</name>
455 <source>The attribute with the %1 type is not processed</source>
456 <translation>The attribute with the %1 type is not processed</translation>
460 <name>SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType</name>
462 <source>The result is empty</source>
463 <translation>The constraint argument refers to not existing item</translation>
467 <name>SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType</name>
469 <source>The shape is empty</source>
470 <translation>The constraint argument refers to the empty shape</translation>
474 <name>SketchConstraintPerpendicular:ConstraintEntityB:SketchPlugin_ExternalValidator</name>
476 <source>Both features, attribute and attribute in parameter, are external.</source>
477 <translation>Two external lines can not be constrained as perpendicular</translation>
482 <name>SketchConstraintRadius:Model_FeatureValidator</name>
484 <source>Attribute "%1" is not initialized.</source>
485 <translation>Circle is not selected</translation>
489 <name>SketchConstraintRadius:ConstraintFlyoutValuePnt</name>
491 <source>Attribute "ConstraintFlyoutValuePnt" is locked by modification value in the viewer.</source>
492 <translation>Flyout value point is not clicked in the viewer</translation>
496 <name>SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType</name>
498 <source>The object is empty</source>
499 <translation>Object is not selected</translation>
503 <name>SketchConstraintRadius:ConstraintValue:GeomValidators_Positive</name>
505 <source>Double is not initialized.</source>
506 <translation>Radius value is not positive</translation>
510 <name>SketchConstraintRadius:ConstraintValue:GeomValidators_Positive</name>
512 <source>Value is too small.</source>
513 <translation>Radius is too small</translation>
517 <name>SketchConstraintRadius:ConstraintValue:GeomValidators_Positive</name>
519 <source>Integer is not initialized.</source>
520 <translation>Integer radius must be set</translation>
524 <name>SketchConstraintRadius:ConstraintValue:GeomValidators_Positive</name>
526 <source>Integer is not positive.</source>
527 <translation>Integer radius must be positive</translation>
531 <name>SketchConstraintRadius:Model_FeatureValidator</name>
533 <source>Attribute "%1" is not initialized.</source>
534 <translation>Set the radius</translation>
538 <name>SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType</name>
540 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
541 <translation>Shape type must be %1</translation>
545 <name>SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType</name>
547 <source>It has reference to an empty attribute</source>
548 <translation>The circle argument refers to nothing</translation>
552 <name>SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType</name>
554 <source>Shape type is "%1", it should be "%2"</source>
555 <translation>The circle argument shape type is "%1", it should be "%2"</translation>
559 <name>SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType</name>
561 <source>The attribute with the %1 type is not processed</source>
562 <translation>The attribute with the %1 type is not processed</translation>
566 <name>SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType</name>
568 <source>The result is empty</source>
569 <translation>The constraint argument refers to not existing item</translation>
573 <name>SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType</name>
575 <source>The shape is empty</source>
576 <translation>The constraint argument refers to the empty shape</translation>
581 <name>SketchConstraintVertical</name>
583 <source>ModelAPI_StateInvalidArgument</source>
584 <translation>Wrong object is selected</translation>
588 <name>SketchConstraintVertical:Model_FeatureValidator</name>
590 <source>Attribute "%1" is not initialized.</source>
591 <translation>Line is not selected</translation>
595 <name>SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType</name>
597 <source>The object is empty</source>
598 <translation>Line is not selected</translation>
602 <name>SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType</name>
604 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
605 <translation>The first line references to not acceptable shape type. The type should be: %1</translation>
609 <name>SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType</name>
611 <source>It has reference to an empty attribute</source>
612 <translation>The first line refers to nothing</translation>
616 <name>SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType</name>
618 <source>Shape type is "%1", it should be "%2"</source>
619 <translation>The first line refers to %1 but must be %2</translation>
623 <name>SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType</name>
625 <source>The attribute with the %1 type is not processed</source>
626 <translation>The first line of type %1 is not supported</translation>
630 <name>SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType</name>
632 <source>The result is empty</source>
633 <translation>The first line refers to not existing item</translation>
637 <name>SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType</name>
639 <source>The shape is empty</source>
640 <translation>The first line refers to the empty shape</translation>
645 <name>SketchLine:GeomValidators_Different</name>
647 <source>Attributes StartPoint and EndPoint are equal.</source>
648 <translation>Start point and end point are the same</translation>
652 <name>SketchLine:Model_FeatureValidator</name>
654 <source>Attribute "%1" is not initialized.</source>
655 <translation>End point is not selected</translation>
659 <name>SketchLine:EndPoint</name>
661 <source>Attribute "%1" is locked by modification value in the viewer.</source>
662 <translation>Select an end point in the viewer</translation>
666 <name>SketchLine:StartPoint</name>
668 <source>Attribute "%1" is locked by modification value in the viewer.</source>
669 <translation>Select a start point in the viewer</translation>
673 <name>SketchLine:StartPoint</name>
675 <source>Attribute "%1" is not initialized.</source>
676 <translation>Start point is not selected</translation>
680 <name>SketchLine:EndPoint</name>
682 <source>Attribute "%1" is not initialized.</source>
683 <translation>End point is not selected</translation>
687 <name>SketchLine:Model_FeatureValidator</name>
689 <source>Attribute "%1" is not initialized.</source>
690 <translation>Select a start point</translation>
695 <name>SketchPoint:Model_FeatureValidator</name>
697 <source>Attribute "%1" is not initialized.</source>
698 <translation>Point is not defined</translation>
702 <name>SketchPoint:PointCoordinates</name>
704 <source>Attribute "%1" is locked by modification value in the viewer.</source>
705 <translation>Select a point</translation>
710 <name>SketchRectangle:GeomValidators_Different</name>
712 <source>Attributes RectStartPoint and RectEndPoint are equal.</source>
713 <translation>Start point and end point must be different</translation>
717 <name>SketchRectangle:RectEndPoint</name>
719 <source>Attribute "%1" is locked by modification value in the viewer.</source>
720 <translation>Select an end point of the rectangle.</translation>
724 <name>SketchRectangle:RectStartPoint</name>
726 <source>Attribute "%1" is locked by modification value in the viewer.</source>
727 <translation>Select a point.</translation>
731 <name>SketchRectangle:Model_FeatureValidator</name>
733 <source>Attribute "%1" is not initialized.</source>
734 <translation>Select a point.</translation>
738 <name>SketchRectangle:RectEndPoint</name>
740 <source>Attribute "%1" is locked by modification value in the viewer.</source>
741 <translation>Select a point.</translation>
745 <name>SketchRectangle:RectStartPoint</name>
747 <source>Attribute "%1" is locked by modification value in the viewer.</source>
748 <translation>Select an point.</translation>
753 <name>SketchArc:ArcRadius:GeomValidators_Positive</name>
755 <source>Double is not initialized.</source>
756 <translation>Radius value is not positive</translation>
760 <name>SketchArc:ArcTangentPoint:SketchPlugin_ArcTangentPoint</name>
762 <source>The attribute ArcTangentPoint should be a point</source>
763 <translation>Arc tangent point is not selected</translation>
767 <name>SketchArc:ArcCenter</name>
769 <source>Attribute "%1" is locked by modification value in the viewer.</source>
770 <translation>Select a center point</translation>
774 <name>SketchArc:ArcCenter</name>
776 <source>Attribute "%1" is not initialized.</source>
777 <translation>Center point is not defined</translation>
781 <name>SketchArc:ArcEndPoint</name>
783 <source>Attribute "%1" is locked by modification value in the viewer.</source>
784 <translation>Select an end point</translation>
788 <name>SketchArc:ArcPassedPoint</name>
790 <source>Attribute "%1" is locked by modification value in the viewer.</source>
791 <translation>Select an intermediate point</translation>
795 <name>SketchArc:ArcStartPoint</name>
797 <source>Attribute "%1" is locked by modification value in the viewer.</source>
798 <translation>Select a start point</translation>
802 <name>SketchArc:GeomValidators_Different</name>
804 <source>Attributes ArcCenter and ArcStartPoint are equal.</source>
805 <translation>Center point and end point must be different</translation>
809 <name>SketchArc:GeomValidators_Different</name>
811 <source>Attributes ArcStartPoint and ArcEndPoint are equal.</source>
812 <translation>Start point and end point must be different</translation>
816 <name>SketchArc:Model_FeatureValidator</name>
818 <source>Attribute "%1" is not initialized.</source>
819 <translation>End point is not defined</translation>
823 <name>SketchArc:Model_FeatureValidator</name>
825 <source>Attribute "%1" is not initialized.</source>
826 <translation>Intermediate point is not defined</translation>
830 <name>SketchArc:ArcRadius:GeomValidators_Positive</name>
832 <source>Value is too small.</source>
833 <translation>Arc radius is too small</translation>
837 <name>SketchArc:ArcRadius:GeomValidators_Positive</name>
839 <source>Integer is not initialized.</source>
840 <translation>Integer arc radius must be set</translation>
844 <name>SketchArc:ArcRadius:GeomValidators_Positive</name>
846 <source>Integer is not positive.</source>
847 <translation>Integer arc radius must be positive</translation>
851 <name>SketchArc:Model_FeatureValidator</name>
853 <source>Attribute "%1" is not initialized.</source>
854 <translation>Select an arc center</translation>
858 <name>SketchArc:Model_FeatureValidator:ArcStartPoint</name>
860 <source>Attribute "%1" is not initialized.</source>
861 <translation>Select an arc start point</translation>
865 <name>SketchArc:Model_FeatureValidator</name>
867 <source>Attribute "%1" is not initialized.</source>
868 <translation>Select an arc end point</translation>
872 <name>SketchArc:Model_FeatureValidator</name>
874 <source>Attribute "%1" is not initialized.</source>
875 <translation>Select an arc passed point</translation>
879 <name>SketchArc:Model_FeatureValidator</name>
881 <source>Attribute "%1" is not initialized.</source>
882 <translation>Select an arc tangent point</translation>
886 <name>SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType</name>
888 <source>The object is empty</source>
889 <translation>Line is not selected</translation>
893 <name>SketchConstraintMirror:Model_FeatureValidator</name>
895 <source>Attribute "%1" is not initialized.</source>
896 <translation>Mirror line is not selected</translation>
900 <name>SketchConstraintMirror:Model_FeatureValidator</name>
902 <source>Attribute "%1" is not initialized.</source>
903 <translation>Objects for mirror are not selected</translation>
907 <name>SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType</name>
909 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
910 <translation>The mirror line references to not acceptable shape type. The type should be: %1</translation>
914 <name>SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType</name>
916 <source>It has reference to an empty attribute</source>
917 <translation>The mirror line refers to nothing</translation>
921 <name>SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType</name>
923 <source>Shape type is "%1", it should be "%2"</source>
924 <translation>The mirror line refers to %1 but must be %2</translation>
928 <name>SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType</name>
930 <source>The attribute with the %1 type is not processed</source>
931 <translation>The mirror line of type %1 is not supported</translation>
935 <name>SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType</name>
937 <source>The result is empty</source>
938 <translation>The mirror line refers to not existing item</translation>
942 <name>SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType</name>
944 <source>The shape is empty</source>
945 <translation>The mirror line refers to the empty shape</translation>
950 <name>SketchMultiRotation:Model_FeatureValidator</name>
952 <source>Attribute "%1" is not initialized.</source>
953 <translation>Type of angle is not defined</translation>
957 <name>SketchMultiRotation:Model_FeatureValidator</name>
959 <source>Attribute "%1" is not initialized.</source>
960 <translation>Rotation center is not selected</translation>
964 <name>SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType</name>
966 <source>The object is empty</source>
967 <translation>Rotation center is not selected</translation>
971 <name>SketchMultiRotation:MultiRotationObjects:GeomValidators_Positive</name>
973 <source>Double is not initialized.</source>
974 <translation>The total number of rotated objects is not set</translation>
978 <name>SketchMultiRotation:MultiRotationObjects:GeomValidators_Positive</name>
980 <source>Value is too small.</source>
981 <translation>The total number of rotated objects must be positive</translation>
985 <name>SketchMultiRotation:MultiRotationObjects:GeomValidators_Positive</name>
987 <source>Integer is not initialized.</source>
988 <translation>The total number of rotated objects is not set</translation>
992 <name>SketchMultiRotation:MultiRotationObjects:GeomValidators_Positive</name>
994 <source>Integer is not positive.</source>
995 <translation>The total number of rotated objects must be positive</translation>
999 <name>SketchMultiRotation:Model_FeatureValidator</name>
1001 <source>Attribute "%1" is not initialized.</source>
1002 <translation>Select objects to rotate</translation>
1006 <name>SketchMultiRotation:Model_FeatureValidator</name>
1008 <source>Attribute "%1" is not initialized.</source>
1009 <translation>Set rotation angle</translation>
1013 <name>SketchMultiRotation:Model_FeatureValidator</name>
1015 <source>Attribute "%1" is not initialized.</source>
1016 <translation>Set the number of resulting objects</translation>
1020 <name>SketchMultiRotation:MultiRotationList:SketchPlugin_CopyValidator</name>
1022 <source>The attribute with the %1 type is not processed</source>
1023 <translation>The attribute with the %1 type is not processed</translation>
1027 <name>SketchMultiRotation:MultiRotationList:SketchPlugin_CopyValidator</name>
1029 <source>The object %1 is a result of copy</source>
1030 <translation>The object %1 is a result of copy and can not be rotated</translation>
1034 <name>SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType</name>
1036 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1037 <translation>Shape type must be %1</translation>
1041 <name>SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType</name>
1043 <source>It has reference to an empty attribute</source>
1044 <translation>The rotation center refers to nothing</translation>
1048 <name>SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType</name>
1050 <source>Shape type is "%1", it should be "%2"</source>
1051 <translation>The rotation center shape type is "%1", it should be "%2"</translation>
1055 <name>SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType</name>
1057 <source>The attribute with the %1 type is not processed</source>
1058 <translation>The attribute with the %1 type is not processed</translation>
1062 <name>SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType</name>
1064 <source>The result is empty</source>
1065 <translation>The rotation center refers to not existing item</translation>
1069 <name>SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType</name>
1071 <source>The shape is empty</source>
1072 <translation>The rotation center refers to the empty shape</translation>
1077 <name>SketchMultiTranslation:Model_FeatureValidator</name>
1079 <source>Attribute "%1" is not initialized.</source>
1080 <translation>End point of translation vector is not defined</translation>
1084 <name>SketchMultiTranslation:Model_FeatureValidator</name>
1086 <source>Attribute "%1" is not initialized.</source>
1087 <translation>Objects for translation are not selected</translation>
1091 <name>SketchMultiTranslation:GeomValidators_ShapeType</name>
1093 <source>The object is empty</source>
1094 <translation>End point of translation vector is not selected</translation>
1098 <name>SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType</name>
1100 <source>The object is empty</source>
1101 <translation>Start point of translation vector is not selected</translation>
1106 <name>SketchMultiTranslation:MultiTranslationObjects:GeomValidators_Positive</name>
1108 <source>Double is not initialized.</source>
1109 <translation>The total number of translated objects is not set</translation>
1113 <name>SketchMultiTranslation:MultiTranslationObjects:GeomValidators_Positive</name>
1115 <source>Value is too small.</source>
1116 <translation>The total number of translated objects must be positive</translation>
1120 <name>SketchMultiTranslation:MultiTranslationObjects:GeomValidators_Positive</name>
1122 <source>Integer is not initialized.</source>
1123 <translation>The total number of translated objects is not set</translation>
1127 <name>SketchMultiTranslation:MultiTranslationObjects:GeomValidators_Positive</name>
1129 <source>Integer is not positive.</source>
1130 <translation>The total number of translated objects must be positive</translation>
1135 <name>SketchMultiTranslation:Model_FeatureValidator</name>
1137 <source>Attribute "%1" is not initialized.</source>
1138 <translation>Select a start point</translation>
1142 <name>SketchMultiTranslation:Model_FeatureValidator</name>
1144 <source>Attribute "%1" is not initialized.</source>
1145 <translation>Select a total number of objects</translation>
1149 <name>SketchMultiTranslation:MultiTranslationList:SketchPlugin_CopyValidator</name>
1151 <source>The attribute with the %1 type is not processed</source>
1152 <translation>The attribute with the %1 type is not processed</translation>
1156 <name>SketchMultiTranslation:MultiTranslationList:SketchPlugin_CopyValidator</name>
1158 <source>The object %1 is a result of copy</source>
1159 <translation>The object %1 is a result of copy and can not be translated</translation>
1163 <name>SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType</name>
1165 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1166 <translation>Shape type must be %1</translation>
1170 <name>SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType</name>
1172 <source>It has reference to an empty attribute</source>
1173 <translation>The translation start point refers to nothing</translation>
1177 <name>SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType</name>
1179 <source>Shape type is "%1", it should be "%2"</source>
1180 <translation>The translation start point shape type is "%1", it should be "%2"</translation>
1184 <name>SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType</name>
1186 <source>The attribute with the %1 type is not processed</source>
1187 <translation>The attribute with the %1 type is not processed</translation>
1191 <name>SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType</name>
1193 <source>The object is empty</source>
1194 <translation>Select a start point</translation>
1198 <name>SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType</name>
1200 <source>The result is empty</source>
1201 <translation>The start point refers to not existing item</translation>
1205 <name>SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType</name>
1207 <source>The shape is empty</source>
1208 <translation>The start point refers to the empty shape</translation>
1212 <name>SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType</name>
1214 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1215 <translation>Shape type must be %1</translation>
1219 <name>SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType</name>
1221 <source>It has reference to an empty attribute</source>
1222 <translation>The translation end point refers to nothing</translation>
1226 <name>SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType</name>
1228 <source>Shape type is "%1", it should be "%2"</source>
1229 <translation>The translation end point shape type is "%1", it should be "%2"</translation>
1233 <name>SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType</name>
1235 <source>The attribute with the %1 type is not processed</source>
1236 <translation>The attribute with the %1 type is not processed</translation>
1240 <name>SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType</name>
1242 <source>The object is empty</source>
1243 <translation>Select an end point</translation>
1247 <name>SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType</name>
1249 <source>The result is empty</source>
1250 <translation>The end point refers to not existing item</translation>
1254 <name>SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType</name>
1256 <source>The shape is empty</source>
1257 <translation>The end point refers to the empty shape</translation>
1262 <name>SketchConstraintAngle:ConstraintFlyoutValuePnt</name>
1264 <source>Attribute "ConstraintFlyoutValuePnt" is locked by modification value in the viewer.</source>
1265 <translation>Flyout value point is not clicked in the viewer</translation>
1269 <name>SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType</name>
1271 <source>The object is empty</source>
1272 <translation>First object is not selected</translation>
1276 <name>SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType</name>
1278 <source>The object is empty</source>
1279 <translation>Second object is not selected</translation>
1283 <name>SketchConstraintAngle:ConstraintEntityB:SketchPlugin_ExternalValidator</name>
1285 <source>Both features, attribute and attribute in parameter, are external.</source>
1286 <translation>An angle can not be created between two external objects</translation>
1290 <name>SketchConstraintAngle:Model_FeatureValidator</name>
1292 <source>Attribute "%1" is not initialized.</source>
1293 <translation>First object is not selected</translation>
1297 <name>SketchConstraintAngle:Model_FeatureValidator</name>
1299 <source>Attribute "%1" is not initialized.</source>
1300 <translation>Second object is not selected</translation>
1304 <name>SketchConstraintAngle:Model_FeatureValidator</name>
1306 <source>Attribute "%1" is not initialized.</source>
1307 <translation>Set the angle value</translation>
1311 <name>SketchConstraintAngle:Model_FeatureValidator</name>
1313 <source>Attribute "%1" is not initialized.</source>
1314 <translation>Type of angle is not set</translation>
1318 <name>SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType</name>
1320 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1321 <translation>Shape type must be %1</translation>
1325 <name>SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType</name>
1327 <source>It has reference to an empty attribute</source>
1328 <translation>The first object refers to nothing</translation>
1332 <name>SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType</name>
1334 <source>Shape type is "%1", it should be "%2"</source>
1335 <translation>The first object shape type is "%1", it should be "%2"</translation>
1339 <name>SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType</name>
1341 <source>The attribute with the %1 type is not processed</source>
1342 <translation>The attribute with the %1 type is not processed</translation>
1346 <name>SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType</name>
1348 <source>The result is empty</source>
1349 <translation>The constraint argument refers to not existing item</translation>
1353 <name>SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType</name>
1355 <source>The shape is empty</source>
1356 <translation>The constraint argument refers to the empty shape</translation>
1360 <name>SketchConstraintAngle:ConstraintEntityA:SketchPlugin_ExternalValidator</name>
1362 <source>Both features, attribute and attribute in parameter, are external.</source>
1363 <translation>Angle can not be created on two external entities</translation>
1367 <name>SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType</name>
1369 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1370 <translation>Shape type must be %1</translation>
1374 <name>SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType</name>
1376 <source>It has reference to an empty attribute</source>
1377 <translation>The second object refers to nothing</translation>
1381 <name>SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType</name>
1383 <source>Shape type is "%1", it should be "%2"</source>
1384 <translation>The second object shape type is "%1", it should be "%2"</translation>
1388 <name>SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType</name>
1390 <source>The attribute with the %1 type is not processed</source>
1391 <translation>The attribute with the %1 type is not processed</translation>
1395 <name>SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType</name>
1397 <source>The result is empty</source>
1398 <translation>The constraint argument refers to not existing item</translation>
1402 <name>SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType</name>
1404 <source>The shape is empty</source>
1405 <translation>The constraint argument refers to the empty shape</translation>
1410 <name>SketchConstraintCoincidence:ConstraintEntityA:PartSet_DifferentObjects</name>
1412 <source>The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes.</source>
1413 <translation>Diferent objects should be selected</translation>
1417 <name>SketchConstraintCoincidence:ConstraintEntityB:PartSet_DifferentObjects</name>
1419 <source>The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes.</source>
1420 <translation>Diferent objects should be selected</translation>
1424 <name>SketchConstraintCoincidence:Model_FeatureValidator</name>
1426 <source>Attribute "%1" is not initialized.</source>
1427 <translation>First object is not selected</translation>
1431 <name>SketchConstraintCoincidence:Model_FeatureValidator</name>
1433 <source>Attribute "%1" is not initialized.</source>
1434 <translation>Second object is not selected</translation>
1438 <name>SketchConstraintCoincidence:ConstraintEntityB:SketchPlugin_ExternalValidator</name>
1440 <source>Both features, attribute and attribute in parameter, are external.</source>
1441 <translation>A coincidence can not be created between two external objects</translation>
1445 <name>SketchConstraintCoincidence:ConstraintEntityA:SketchPlugin_ExternalValidator</name>
1447 <source>Both features, attribute and attribute in parameter, are external.</source>
1448 <translation>A coincidence can not be created between two external objects</translation>
1453 <name>SketchConstraintDistance:ConstraintFlyoutValuePnt</name>
1455 <source>Attribute "ConstraintFlyoutValuePnt" is locked by modification value in the viewer.</source>
1456 <translation>Flyout value point is not clicked in the viewer</translation>
1460 <name>SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType</name>
1462 <source>The object is empty</source>
1463 <translation>First object is not selected</translation>
1467 <name>SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType</name>
1469 <source>The object is empty</source>
1470 <translation>Second object is not selected</translation>
1474 <name>SketchConstraintDistance:ConstraintValue:GeomValidators_Positive</name>
1476 <source>Double is not initialized.</source>
1477 <translation>Distance value must be set</translation>
1481 <name>SketchConstraintDistance:Model_FeatureValidator</name>
1483 <source>Attribute "%1" is not initialized.</source>
1484 <translation>First object is not selected</translation>
1488 <name>SketchConstraintDistance:Model_FeatureValidator</name>
1490 <source>Attribute "%1" is not initialized.</source>
1491 <translation>Second object is not selected</translation>
1495 <name>SketchConstraintDistance:ConstraintValue:GeomValidators_Positive</name>
1497 <source>Value is too small.</source>
1498 <translation>Distance value is too small</translation>
1502 <name>SketchConstraintDistance:ConstraintValue:GeomValidators_Positive</name>
1504 <source>Integer is not initialized.</source>
1505 <translation>Integer distance value must be set</translation>
1509 <name>SketchConstraintDistance:ConstraintValue:GeomValidators_Positive</name>
1511 <source>Integer is not positive.</source>
1512 <translation>Integer distance value must be positive</translation>
1516 <name>SketchConstraintDistance:Model_FeatureValidator</name>
1518 <source>Attribute "%1" is not initialized.</source>
1519 <translation>First object is not selected</translation>
1523 <name>SketchConstraintDistance:Model_FeatureValidator</name>
1525 <source>Attribute "%1" is not initialized.</source>
1526 <translation>Second object is not selected</translation>
1530 <name>SketchConstraintDistance:Model_FeatureValidator</name>
1532 <source>Attribute "%1" is not initialized.</source>
1533 <translation>Set the distance</translation>
1537 <name>SketchConstraintDistance:ConstraintEntityA:SketchPlugin_ExternalValidator</name>
1539 <source>Both features, attribute and attribute in parameter, are external.</source>
1540 <translation>Distance can not be set between two external objects</translation>
1544 <name>SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType</name>
1546 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1547 <translation>Shape type must be %1</translation>
1551 <name>SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType</name>
1553 <source>It has reference to an empty attribute</source>
1554 <translation>The first object refers to nothing</translation>
1558 <name>SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType</name>
1560 <source>Shape type is "%1", it should be "%2"</source>
1561 <translation>The first object shape type is "%1", it should be "%2"</translation>
1565 <name>SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType</name>
1567 <source>The attribute with the %1 type is not processed</source>
1568 <translation>The attribute with the %1 type is not processed</translation>
1572 <name>SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType</name>
1574 <source>The result is empty</source>
1575 <translation>The constraint argument refers to not existing item</translation>
1579 <name>SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType</name>
1581 <source>The shape is empty</source>
1582 <translation>The constraint argument refers to the empty shape</translation>
1586 <name>SketchConstraintDistance:ConstraintEntityB:SketchPlugin_ExternalValidator</name>
1588 <source>Both features, attribute and attribute in parameter, are external.</source>
1589 <translation>Distance can not be set between two external objects</translation>
1593 <name>SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType</name>
1595 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1596 <translation>Shape type must be %1</translation>
1600 <name>SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType</name>
1602 <source>It has reference to an empty attribute</source>
1603 <translation>The second object refers to nothing</translation>
1607 <name>SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType</name>
1609 <source>Shape type is "%1", it should be "%2"</source>
1610 <translation>The second object shape type is "%1", it should be "%2"</translation>
1614 <name>SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType</name>
1616 <source>The attribute with the %1 type is not processed</source>
1617 <translation>The attribute with the %1 type is not processed</translation>
1621 <name>SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType</name>
1623 <source>The result is empty</source>
1624 <translation>The constraint argument refers to not existing item</translation>
1628 <name>SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType</name>
1630 <source>The shape is empty</source>
1631 <translation>The constraint argument refers to the empty shape</translation>
1636 <name>SketchConstraintEqual:ConstraintEntityA:PartSet_DifferentObjects</name>
1638 <source>The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes.</source>
1639 <translation>Diferent objects should be selected</translation>
1643 <name>SketchConstraintEqual:ConstraintEntityB:PartSet_DifferentObjects</name>
1645 <source>The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes.</source>
1646 <translation>Diferent objects should be selected</translation>
1650 <name>SketchConstraintEqual:ConstraintEntityB:SketchPlugin_EqualAttr</name>
1652 <source>An empty object is used.</source>
1653 <translation>An empty object is used</translation>
1657 <name>SketchConstraintEqual:Model_FeatureValidator</name>
1659 <source>Attribute "%1" is not initialized.</source>
1660 <translation>First object is not selected</translation>
1664 <name>SketchConstraintEqual:Model_FeatureValidator</name>
1666 <source>Attribute "%1" is not initialized.</source>
1667 <translation>Second object is not selected</translation>
1671 <name>SketchConstraintEqual:ConstraintEntityB:SketchPlugin_ExternalValidator</name>
1673 <source>Both features, attribute and attribute in parameter, are external.</source>
1674 <translation>An equality can not be set between two external objects</translation>
1678 <name>SketchConstraintEqual:ConstraintEntityA:SketchPlugin_ExternalValidator</name>
1680 <source>Both features, attribute and attribute in parameter, are external.</source>
1681 <translation>An equality can not be set between two external objects</translation>
1686 <name>SketchConstraintLength:ConstraintFlyoutValuePnt</name>
1688 <source>Attribute "ConstraintFlyoutValuePnt" is locked by modification value in the viewer.</source>
1689 <translation>Flyout value point is not clicked in the viewer</translation>
1693 <name>SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType</name>
1695 <source>The object is empty</source>
1696 <translation>Object is not selected</translation>
1700 <name>SketchConstraintLength:ConstraintValue:GeomValidators_Positive</name>
1702 <source>Double is not initialized.</source>
1703 <translation>Set the length value</translation>
1707 <name>SketchConstraintLength:Model_FeatureValidator</name>
1709 <source>Attribute "%1" is not initialized.</source>
1710 <translation>Line is not selected</translation>
1714 <name>SketchConstraintLength:ConstraintValue:GeomValidators_Positive</name>
1716 <source>Value is too small.</source>
1717 <translation>Length value is too small</translation>
1721 <name>SketchConstraintLength:ConstraintValue:GeomValidators_Positive</name>
1723 <source>Integer is not initialized.</source>
1724 <translation>Set the integer length value</translation>
1728 <name>SketchConstraintLength:ConstraintValue:GeomValidators_Positive</name>
1730 <source>Integer is not positive.</source>
1731 <translation>Integer length value is not positive</translation>
1736 <name>SketchConstraintLength:Model_FeatureValidator</name>
1738 <source>Attribute "%1" is not initialized.</source>
1739 <translation>Line is not selected</translation>
1743 <name>SketchConstraintLength:Model_FeatureValidator</name>
1745 <source>Attribute "%1" is not initialized.</source>
1746 <translation>Set the length value</translation>
1750 <name>SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType</name>
1752 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1753 <translation>Shape type must be %1</translation>
1757 <name>SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType</name>
1759 <source>It has reference to an empty attribute</source>
1760 <translation>The line refers to nothing</translation>
1764 <name>SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType</name>
1766 <source>Shape type is "%1", it should be "%2"</source>
1767 <translation>The line shape type is "%1", it should be "%2"</translation>
1771 <name>SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType</name>
1773 <source>The attribute with the %1 type is not processed</source>
1774 <translation>The attribute with the %1 type is not processed</translation>
1778 <name>SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType</name>
1780 <source>The result is empty</source>
1781 <translation>The constraint argument refers to not existing item</translation>
1785 <name>SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType</name>
1787 <source>The shape is empty</source>
1788 <translation>The constraint argument refers to the empty shape</translation>
1793 <name>SketchConstraintMiddle:ConstraintEntityA:PartSet_DifferentObjects</name>
1795 <source>The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes.</source>
1796 <translation>Diferent objects should be selected</translation>
1800 <name>SketchConstraintMiddle:ConstraintEntityB:PartSet_DifferentObjects</name>
1802 <source>The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes.</source>
1803 <translation>Diferent objects should be selected</translation>
1807 <name>SketchConstraintMiddle:ConstraintEntityB:SketchPlugin_MiddlePointAttr</name>
1809 <source>Middle point constraint allows points and lines only</source>
1810 <translation>Not point or line is selected</translation>
1814 <name>SketchConstraintMiddle:Model_FeatureValidator</name>
1816 <source>Attribute "%1" is not initialized.</source>
1817 <translation>First object is not selected</translation>
1821 <name>SketchConstraintMiddle:Model_FeatureValidator</name>
1823 <source>Attribute "%1" is not initialized.</source>
1824 <translation>Second object is not selected</translation>
1828 <name>SketchConstraintMiddle:ConstraintEntityB:SketchPlugin_ExternalValidator</name>
1830 <source>Both features, attribute and attribute in parameter, are external.</source>
1831 <translation>A middle can not be set for two external objects</translation>
1835 <name>SketchConstraintMiddle:ConstraintEntityA:SketchPlugin_ExternalValidator</name>
1837 <source>Both features, attribute and attribute in parameter, are external.</source>
1838 <translation>A middle can not be set for two external objects</translation>
1843 <name>SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType</name>
1845 <source>The object is empty</source>
1846 <translation>First object is not selected</translation>
1850 <name>SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType</name>
1852 <source>The object is empty</source>
1853 <translation>Second object is not selected</translation>
1857 <name>SketchConstraintParallel:Model_FeatureValidator</name>
1859 <source>Attribute "%1" is not initialized.</source>
1860 <translation>First line is not selected</translation>
1864 <name>SketchConstraintParallel:Model_FeatureValidator</name>
1866 <source>Attribute "%1" is not initialized.</source>
1867 <translation>Second line is not selected</translation>
1871 <name>SketchConstraintParallel:ConstraintEntityB:SketchPlugin_ExternalValidator</name>
1873 <source>Both features, attribute and attribute in parameter, are external.</source>
1874 <translation>A parallel can not be set between two external objects</translation>
1878 <name>SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType</name>
1880 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1881 <translation>Shape type must be %1</translation>
1885 <name>SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType</name>
1887 <source>It has reference to an empty attribute</source>
1888 <translation>The first line refers to nothing</translation>
1892 <name>SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType</name>
1894 <source>Shape type is "%1", it should be "%2"</source>
1895 <translation>The first line shape type is "%1", it should be "%2"</translation>
1899 <name>SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType</name>
1901 <source>The attribute with the %1 type is not processed</source>
1902 <translation>The attribute with the %1 type is not processed</translation>
1906 <name>SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType</name>
1908 <source>The result is empty</source>
1909 <translation>The constraint argument refers to not existing item</translation>
1913 <name>SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType</name>
1915 <source>The shape is empty</source>
1916 <translation>The constraint argument refers to the empty shape</translation>
1920 <name>SketchConstraintParallel:ConstraintEntityA:SketchPlugin_ExternalValidator</name>
1922 <source>Both features, attribute and attribute in parameter, are external.</source>
1923 <translation>A parallel can not be set between two external objects</translation>
1927 <name>SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType</name>
1929 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1930 <translation>Shape type must be %1</translation>
1934 <name>SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType</name>
1936 <source>It has reference to an empty attribute</source>
1937 <translation>The second line refers to nothing</translation>
1941 <name>SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType</name>
1943 <source>Shape type is "%1", it should be "%2"</source>
1944 <translation>The second line shape type is "%1", it should be "%2"</translation>
1948 <name>SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType</name>
1950 <source>The attribute with the %1 type is not processed</source>
1951 <translation>The attribute with the %1 type is not processed</translation>
1955 <name>SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType</name>
1957 <source>The result is empty</source>
1958 <translation>The constraint argument refers to not existing item</translation>
1962 <name>SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType</name>
1964 <source>The shape is empty</source>
1965 <translation>The constraint argument refers to the empty shape</translation>
1970 <name>SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType</name>
1972 <source>The object is empty</source>
1973 <translation>Object is not selected</translation>
1977 <name>SketchConstraintRigid:Model_FeatureValidator</name>
1979 <source>Attribute "%1" is not initialized.</source>
1980 <translation>Object is not selected</translation>
1984 <name>SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType</name>
1986 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1987 <translation>The fixed constraint references to not acceptable shape type. The type should be: %1</translation>
1991 <name>SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType</name>
1993 <source>It has reference to an empty attribute</source>
1994 <translation>The fixed constraint refers to nothing</translation>
1998 <name>SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType</name>
2000 <source>Shape type is "%1", it should be "%2"</source>
2001 <translation>The fixed constraint refers to %1 but must be %2</translation>
2005 <name>SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType</name>
2007 <source>The attribute with the %1 type is not processed</source>
2008 <translation>The fixed constraint of type %1 is not supported</translation>
2012 <name>SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType</name>
2014 <source>The result is empty</source>
2015 <translation>The fixed constraint refers to not existing item</translation>
2019 <name>SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType</name>
2021 <source>The shape is empty</source>
2022 <translation>The fixed constraint refers to the empty shape</translation>
2027 <name>SketchConstraintTangent:ConstraintEntityA:PartSet_DifferentObjects</name>
2029 <source>The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes.</source>
2030 <translation>Diferent objects should be selected</translation>
2034 <name>SketchConstraintTangent:ConstraintEntityB:PartSet_DifferentObjects</name>
2036 <source>The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes.</source>
2037 <translation>Diferent objects should be selected</translation>
2041 <name>SketchConstraintTangent:ConstraintEntityB:SketchPlugin_TangentAttr</name>
2043 <source>It uses an empty object</source>
2044 <translation>Selection is not valid</translation>
2048 <name>SketchConstraintTangent:Model_FeatureValidator</name>
2050 <source>Attribute "%1" is not initialized.</source>
2051 <translation>First object is not selected</translation>
2055 <name>SketchConstraintTangent:Model_FeatureValidator</name>
2057 <source>Attribute "%1" is not initialized.</source>
2058 <translation>Second object is not selected</translation>
2063 <name>SketchConstraintSplit:ConstraintEntityA:SketchPlugin_SplitValidator</name>
2065 <source>The attribute with the %1 type is not processed</source>
2066 <translation>Only attribute selection can be used for the sketch face, not %1</translation>
2071 <name>SketchFillet:ConstraintValue:GeomValidators_Positive</name>
2073 <source>Double is not initialized.</source>
2074 <translation>Set the fillet radius</translation>
2078 <name>SketchFillet:ConstraintValue:GeomValidators_Positive</name>
2080 <source>Value is too small.</source>
2081 <translation>The fillet radius must be positive</translation>
2085 <name>SketchFillet:ConstraintValue:GeomValidators_Positive</name>
2087 <source>Integer is not initialized.</source>
2088 <translation>Set the integer fillet radius</translation>
2092 <name>SketchFillet:ConstraintValue:GeomValidators_Positive</name>
2094 <source>Integer is not positive.</source>
2095 <translation>The integer fillet radius must be positive</translation>
2099 <name>SketchFillet:Model_FeatureValidator</name>
2101 <source>Attribute "%1" is not initialized.</source>
2102 <translation>Select one or several points for filet</translation>
2106 <name>SketchFillet:Model_FeatureValidator</name>
2108 <source>Attribute "%1" is not initialized.</source>
2109 <translation>Set the fillet radius</translation>
2113 <name>SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator</name>
2115 <source>Error: List of points is empty.</source>
2116 <translation>List of points is empty</translation>
2120 <name>SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator</name>
2122 <source>Error: one of the selected point does not have coicidence.</source>
2123 <translation>One of the selected point does not have coicidence</translation>
2127 <name>SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator</name>
2129 <source>Error: One of the selected points does not have two suitable edges for fillet.</source>
2130 <translation>One of the selected points does not have two suitable edges for fillet</translation>
2134 <name>SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator</name>
2136 <source>Error: Edges in selected point has tangent constraint.</source>
2137 <translation>Edges in selected point has tangent constraint</translation>
2141 <name>SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator</name>
2143 <source>Error: Edges in selected point has tangent constraint.</source>
2144 <translation>Edges in selected point has tangent constraint</translation>
2149 <name>SketchProjection:ExternalFeature:SketchPlugin_ProjectionValidator</name>
2151 <source>The attribute with the %1 type is not processed</source>
2152 <translation>An argument of type %1 of the projection feature is not supported</translation>
2156 <name>SketchProjection:ExternalFeature:SketchPlugin_ProjectionValidator</name>
2158 <source>The attribute %1 should be an edge</source>
2159 <translation>The projected item must be an edge</translation>
2163 <name>SketchProjection:ExternalFeature:SketchPlugin_ProjectionValidator</name>
2165 <source>There is no sketch referring to the current feature</source>
2166 <translation>The projection feature has no sketch</translation>
2171 <name>SketchProjection:Model_FeatureValidator</name>
2173 <source>Attribute "%1" is not initialized.</source>
2174 <translation></translation>