1 <?xml version="1.0" encoding="utf-8"?>
3 <TS version="2.0" language="en_US">
5 <name>Sketch:Model_FeatureValidator</name>
7 <source>Attribute "%1" is not initialized.</source>
8 <translation>Select a plane for the sketch</translation>
12 <name>Sketch:Model_FeatureValidator</name>
14 <source>Attribute "%1" is not initialized.</source>
15 <translation>Sketch objects are not defined</translation>
19 <name>Sketch:External:GeomValidators_Face</name>
21 <source>The attribute with the %1 type is not processed</source>
22 <translation>Only attribute selection can be used for the sketch face, not %1</translation>
26 <name>Sketch:External:GeomValidators_Face</name>
28 <source>The shape is not a face.</source>
29 <translation>Sketch can be created only on a face</translation>
33 <name>Sketch:External:GeomValidators_Face</name>
35 <source>The shape is not a plane.</source>
36 <translation>Sketch can be created only on a planar face</translation>
40 <name>Sketch:External:GeomValidators_Face</name>
42 <source>The shape is not a cylinder.</source>
43 <translation>Sketch can be created only on a cylindrical face</translation>
47 <name>Sketch:External:GeomValidators_Face</name>
49 <source>The shape is not an available face.</source>
50 <translation>Sketch cannot be created on the selected face</translation>
54 <name>Sketch:Model_FeatureValidator</name>
56 <source>Attribute "%1" is not initialized.</source>
57 <translation>Select the sketch plane</translation>
61 <name>Sketch:Model_FeatureValidator</name>
63 <source>Attribute "%1" is not initialized.</source>
64 <translation>Can not compute degrees of freedom</translation>
68 <name>Sketch:Model_FeatureValidator</name>
70 <source>Attribute "%1" is not initialized.</source>
71 <translation>Can not compute the solver error</translation>
76 <name>SketchMacroCircle:center_point</name>
78 <source>Attribute "%1" is locked by modification value in the viewer.</source>
79 <translation>Select a point in the viewer</translation>
82 <source>Attribute "%1" is not initialized.</source>
83 <translation>Select a point in the viewer</translation>
87 <name>SketchMacroCircle:passed_point</name>
89 <source>Attribute "%1" is locked by modification value in the viewer.</source>
90 <translation>Select a point in the viewer</translation>
94 <name>SketchMacroCircle:CircleRadius:GeomValidators_Positive</name>
96 <source>Value is too small.</source>
97 <translation>Radius value is too small</translation>
101 <name>SketchMacroCircle:Model_FeatureValidator</name>
103 <source>Attribute "%1" is not initialized.</source>
104 <translation>A center point is not selected</translation>
108 <name>SketchMacroCircle:Model_FeatureValidator</name>
110 <source>Attribute "%1" is not initialized.</source>
111 <translation>A first point is not selected</translation>
115 <name>SketchMacroCircle:Model_FeatureValidator</name>
117 <source>Attribute "%1" is not initialized.</source>
118 <translation>A second point is not selected</translation>
122 <name>SketchMacroCircle:Model_FeatureValidator</name>
124 <source>Attribute "%1" is not initialized.</source>
125 <translation>A third point is not selected</translation>
129 <name>SketchMacroCircle:CircleCenter</name>
131 <source>Attribute "circle_center" is locked by modification value in the viewer.</source>
132 <translation>Select a center point</translation>
136 <name>SketchMacroCircle:FirstPoint</name>
138 <source>Attribute "FirstPoint" is locked by modification value in the viewer.</source>
139 <translation>Select a center point</translation>
143 <name>SketchMacroCircle:SecondPoint</name>
145 <source>Attribute "SecondPoint" is locked by modification value in the viewer.</source>
146 <translation>Select a center point</translation>
150 <name>SketchMacroCircle:ThirdPoint</name>
152 <source>Attribute "ThirdPoint" is locked by modification value in the viewer.</source>
153 <translation>Select a center point</translation>
157 <name>SketchMacroCircle:CircleRadius</name>
159 <source>Attribute "circle_radius" is locked by modification value in the viewer.</source>
160 <translation>Select a radius distance</translation>
164 <name>SketchMacroCircle:CircleRadius:GeomValidators_Positive</name>
166 <source>Integer is not initialized.</source>
167 <translation>Integer radius is not initialized</translation>
171 <name>SketchMacroCircle:CircleRadius:GeomValidators_Positive</name>
173 <source>Integer is not positive.</source>
174 <translation>Integer radius must be set</translation>
178 <name>SketchMacroCircle:Model_FeatureValidator</name>
180 <source>Attribute "%1" is not initialized.</source>
181 <translation>Set the circle radius</translation>
186 <name>SketchMacroArc:Model_FeatureValidator</name>
188 <source>Attribute "%1" is not initialized.</source>
189 <translation>Select a point.</translation>
193 <name>SketchMacroArc:center_point</name>
195 <source>Attribute "%1" is locked by modification value in the viewer.</source>
196 <translation>Select a center point.</translation>
200 <name>SketchMacroArc:end_point_1</name>
202 <source>Attribute "%1" is locked by modification value in the viewer.</source>
203 <translation>Select an end point in the viewer.</translation>
207 <name>SketchMacroArc:end_point_2</name>
209 <source>Attribute "%1" is locked by modification value in the viewer.</source>
210 <translation>Select an end point in the viewer.</translation>
214 <name>SketchMacroArc:end_point_3</name>
216 <source>Attribute "%1" is locked by modification value in the viewer.</source>
217 <translation>Select an end point in the viewer.</translation>
220 <source>Attribute "%1" is not initialized.</source>
221 <translation>Select an end point in the viewer.</translation>
225 <name>SketchMacroArc:passed_point</name>
227 <source>Attribute "%1" is locked by modification value in the viewer.</source>
228 <translation>Select an passed point in the viewer.</translation>
232 <name>SketchMacroArc:start_point_1</name>
234 <source>Attribute "%1" is locked by modification value in the viewer.</source>
235 <translation>Select a start point.</translation>
239 <name>SketchMacroArc:start_point_2</name>
241 <source>Attribute "%1" is locked by modification value in the viewer.</source>
242 <translation>Select a start point.</translation>
247 <name>SketchMacroEllipse:Model_FeatureValidator</name>
249 <source>Attribute "%1" is not initialized.</source>
250 <translation>Select a point.</translation>
254 <name>SketchMacroEllipse:first_point</name>
256 <source>Attribute "%1" is locked by modification value in the viewer.</source>
257 <translation>Select a first point in the viewer.</translation>
261 <name>SketchMacroEllipse:passed_point</name>
263 <source>Attribute "%1" is locked by modification value in the viewer.</source>
264 <translation>Select a passed point.</translation>
268 <name>SketchMacroEllipse:second_point</name>
270 <source>Attribute "%1" is locked by modification value in the viewer.</source>
271 <translation>Select a second point.</translation>
276 <name>SketchMacroEllipticArc:Model_FeatureValidator</name>
278 <source>Attribute "%1" is not initialized.</source>
279 <translation>Select a point.</translation>
283 <name>SketchMacroEllipticArc:center</name>
285 <source>Attribute "%1" is locked by modification value in the viewer.</source>
286 <translation>Select a point.</translation>
289 <source>Attribute "%1" is not initialized.</source>
290 <translation>Select a center point.</translation>
294 <name>SketchMacroEllipticArc:end_point</name>
296 <source>Attribute "%1" is locked by modification value in the viewer.</source>
297 <translation>Select an end point.</translation>
300 <source>Attribute "%1" is not initialized.</source>
301 <translation>Select an end point.</translation>
305 <name>SketchMacroEllipticArc:major_axis_point</name>
307 <source>Attribute "%1" is locked by modification value in the viewer.</source>
308 <translation>Select a major axis point.</translation>
311 <source>Attribute "%1" is not initialized.</source>
312 <translation>Select a major axis point.</translation>
317 <name>SketchSplit:Model_FeatureValidator</name>
319 <source>Attribute "%1" is not initialized.</source>
320 <translation>Select a segment to split in the viewer.</translation>
324 <name>SketchSplit:SelectedObject:SketchPlugin_SplitValidator</name>
326 <source>Select a segment to split in the viewer.</source>
327 <translation></translation>
332 <name>SketchConstraintHorizontal:Model_FeatureValidator</name>
334 <source>Attribute "%1" is not initialized.</source>
335 <translation>Line is not selected</translation>
339 <name>SketchConstraintHorizontal</name>
341 <source>ModelAPI_StateInvalidArgument</source>
342 <translation>Wrong object is selected</translation>
346 <name>SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType</name>
348 <source>The object is empty</source>
349 <translation>Line is not selected</translation>
353 <name>SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType</name>
355 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
356 <translation>The constraint argument does not contain element with acceptable shape type. The type should be one of the next: %1</translation>
360 <name>SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType</name>
362 <source>It has reference to an empty attribute</source>
363 <translation>The constraint argument refers to nothing</translation>
367 <name>SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType</name>
369 <source>Shape type is "%1", it should be "%2"</source>
370 <translation>The constraint argument refers to %1 but must be %2</translation>
374 <name>SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType</name>
376 <source>The attribute with the %1 type is not processed</source>
377 <translation>The constraint argument of type %1 is not supported</translation>
381 <name>SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType</name>
383 <source>The result is empty</source>
384 <translation>The constraint argument refers to not existing item</translation>
388 <name>SketchConstraintHorizontal:ConstraintEntityA:GeomValidators_ShapeType</name>
390 <source>The shape is empty</source>
391 <translation>The constraint argument refers to the empty shape</translation>
396 <name>SketchConstraintPerpendicular:Model_FeatureValidator</name>
398 <source>Attribute "%1" is not initialized.</source>
399 <translation>First line is not selected</translation>
403 <name>SketchConstraintPerpendicular:Model_FeatureValidator</name>
405 <source>Attribute "%1" is not initialized.</source>
406 <translation>Second line is not selected</translation>
410 <name>SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType</name>
412 <source>The object is empty</source>
413 <translation>First line is not selected</translation>
417 <name>SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType</name>
419 <source>The object is empty</source>
420 <translation>Second line is not selected</translation>
424 <name>SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType</name>
426 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
427 <translation>The second line references to not acceptable shape type. The type should be: %1</translation>
431 <name>SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType</name>
433 <source>It has reference to an empty attribute</source>
434 <translation>The second line refers to nothing</translation>
438 <name>SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType</name>
440 <source>Shape type is "%1", it should be "%2"</source>
441 <translation>The second line refers to %1 but must be %2</translation>
445 <name>SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType</name>
447 <source>The attribute with the %1 type is not processed</source>
448 <translation>The second line of type %1 is not supported</translation>
452 <name>SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType</name>
454 <source>The result is empty</source>
455 <translation>The second line refers to not existing item</translation>
459 <name>SketchConstraintPerpendicular:ConstraintEntityB:GeomValidators_ShapeType</name>
461 <source>The shape is empty</source>
462 <translation>The second line refers to the empty shape</translation>
466 <name>SketchConstraintPerpendicular:ConstraintEntityA:SketchPlugin_ExternalValidator</name>
468 <source>Both features, attribute and attribute in parameter, are external.</source>
469 <translation>Two external lines can not be constrained as perpendicular</translation>
473 <name>SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType</name>
475 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
476 <translation>Shape type must be %1</translation>
480 <name>SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType</name>
482 <source>It has reference to an empty attribute</source>
483 <translation>The first line refers to nothing</translation>
487 <name>SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType</name>
489 <source>Shape type is "%1", it should be "%2"</source>
490 <translation>The first line shape type is "%1", it should be "%2"</translation>
494 <name>SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType</name>
496 <source>The attribute with the %1 type is not processed</source>
497 <translation>The attribute with the %1 type is not processed</translation>
501 <name>SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType</name>
503 <source>The result is empty</source>
504 <translation>The constraint argument refers to not existing item</translation>
508 <name>SketchConstraintPerpendicular:ConstraintEntityA:GeomValidators_ShapeType</name>
510 <source>The shape is empty</source>
511 <translation>The constraint argument refers to the empty shape</translation>
515 <name>SketchConstraintPerpendicular:ConstraintEntityB:SketchPlugin_ExternalValidator</name>
517 <source>Both features, attribute and attribute in parameter, are external.</source>
518 <translation>Two external lines can not be constrained as perpendicular</translation>
523 <name>SketchConstraintRadius:Model_FeatureValidator</name>
525 <source>Attribute "%1" is not initialized.</source>
526 <translation>Circle is not selected</translation>
530 <name>SketchConstraintRadius:ConstraintFlyoutValuePnt</name>
532 <source>Attribute "ConstraintFlyoutValuePnt" is locked by modification value in the viewer.</source>
533 <translation>Flyout value point is not clicked in the viewer</translation>
537 <name>SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType</name>
539 <source>The object is empty</source>
540 <translation>Object is not selected</translation>
544 <name>SketchConstraintRadius:ConstraintValue:GeomValidators_Positive</name>
546 <source>Double is not initialized.</source>
547 <translation>Radius value is not positive</translation>
551 <name>SketchConstraintRadius:ConstraintValue:GeomValidators_Positive</name>
553 <source>Value is too small.</source>
554 <translation>Radius is too small</translation>
558 <name>SketchConstraintRadius:ConstraintValue:GeomValidators_Positive</name>
560 <source>Integer is not initialized.</source>
561 <translation>Integer radius must be set</translation>
565 <name>SketchConstraintRadius:ConstraintValue:GeomValidators_Positive</name>
567 <source>Integer is not positive.</source>
568 <translation>Integer radius must be positive</translation>
572 <name>SketchConstraintRadius:Model_FeatureValidator</name>
574 <source>Attribute "%1" is not initialized.</source>
575 <translation>Set the radius</translation>
579 <name>SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType</name>
581 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
582 <translation>Shape type must be %1</translation>
586 <name>SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType</name>
588 <source>It has reference to an empty attribute</source>
589 <translation>The circle argument refers to nothing</translation>
593 <name>SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType</name>
595 <source>Shape type is "%1", it should be "%2"</source>
596 <translation>The circle argument shape type is "%1", it should be "%2"</translation>
600 <name>SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType</name>
602 <source>The attribute with the %1 type is not processed</source>
603 <translation>The attribute with the %1 type is not processed</translation>
607 <name>SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType</name>
609 <source>The result is empty</source>
610 <translation>The constraint argument refers to not existing item</translation>
614 <name>SketchConstraintRadius:ConstraintEntityA:GeomValidators_ShapeType</name>
616 <source>The shape is empty</source>
617 <translation>The constraint argument refers to the empty shape</translation>
622 <name>SketchConstraintVertical</name>
624 <source>ModelAPI_StateInvalidArgument</source>
625 <translation>Wrong object is selected</translation>
629 <name>SketchConstraintVertical:Model_FeatureValidator</name>
631 <source>Attribute "%1" is not initialized.</source>
632 <translation>Line is not selected</translation>
636 <name>SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType</name>
638 <source>The object is empty</source>
639 <translation>Line is not selected</translation>
643 <name>SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType</name>
645 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
646 <translation>The first line references to not acceptable shape type. The type should be: %1</translation>
650 <name>SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType</name>
652 <source>It has reference to an empty attribute</source>
653 <translation>The first line refers to nothing</translation>
657 <name>SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType</name>
659 <source>Shape type is "%1", it should be "%2"</source>
660 <translation>The first line refers to %1 but must be %2</translation>
664 <name>SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType</name>
666 <source>The attribute with the %1 type is not processed</source>
667 <translation>The first line of type %1 is not supported</translation>
671 <name>SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType</name>
673 <source>The result is empty</source>
674 <translation>The first line refers to not existing item</translation>
678 <name>SketchConstraintVertical:ConstraintEntityA:GeomValidators_ShapeType</name>
680 <source>The shape is empty</source>
681 <translation>The first line refers to the empty shape</translation>
686 <name>SketchLine:GeomValidators_Different</name>
688 <source>Attributes StartPoint and EndPoint are equal.</source>
689 <translation>Start point and end point are the same</translation>
693 <name>SketchLine:Model_FeatureValidator</name>
695 <source>Attribute "%1" is not initialized.</source>
696 <translation>End point is not selected</translation>
700 <name>SketchLine:EndPoint</name>
702 <source>Attribute "%1" is locked by modification value in the viewer.</source>
703 <translation>Select an end point in the viewer</translation>
707 <name>SketchLine:StartPoint</name>
709 <source>Attribute "%1" is locked by modification value in the viewer.</source>
710 <translation>Select a start point in the viewer</translation>
714 <name>SketchLine:StartPoint</name>
716 <source>Attribute "%1" is not initialized.</source>
717 <translation>Start point is not selected</translation>
721 <name>SketchLine:EndPoint</name>
723 <source>Attribute "%1" is not initialized.</source>
724 <translation>End point is not selected</translation>
728 <name>SketchLine:Model_FeatureValidator</name>
730 <source>Attribute "%1" is not initialized.</source>
731 <translation>Select a start point</translation>
736 <name>SketchPoint:Model_FeatureValidator</name>
738 <source>Attribute "%1" is not initialized.</source>
739 <translation>Point is not defined</translation>
743 <name>SketchPoint:PointCoordinates</name>
745 <source>Attribute "%1" is not initialized.</source>
746 <translation>Select a point</translation>
750 <name>SketchPoint:PointCoordinates</name>
752 <source>Attribute "%1" is locked by modification value in the viewer.</source>
753 <translation>Select a point</translation>
758 <name>SketchRectangle:GeomValidators_Different</name>
760 <source>Attributes RectStartPoint and RectEndPoint are equal.</source>
761 <translation>Start point and end point must be different</translation>
765 <name>SketchRectangle:RectEndPoint</name>
767 <source>Attribute "%1" is locked by modification value in the viewer.</source>
768 <translation>Select an end point of the rectangle.</translation>
772 <name>SketchRectangle:RectStartPoint</name>
774 <source>Attribute "%1" is locked by modification value in the viewer.</source>
775 <translation>Select a point.</translation>
779 <name>SketchRectangle:Model_FeatureValidator</name>
781 <source>Attribute "%1" is not initialized.</source>
782 <translation>Select a point.</translation>
786 <name>SketchRectangle:RectEndPoint</name>
788 <source>Attribute "%1" is locked by modification value in the viewer.</source>
789 <translation>Select a point.</translation>
793 <name>SketchRectangle:RectStartPoint</name>
795 <source>Attribute "%1" is locked by modification value in the viewer.</source>
796 <translation>Select an point.</translation>
801 <name>SketchArc:ArcRadius:GeomValidators_Positive</name>
803 <source>Double is not initialized.</source>
804 <translation>Radius value is not positive</translation>
808 <name>SketchArc:ArcTangentPoint:SketchPlugin_ArcTangentPoint</name>
810 <source>The attribute ArcTangentPoint should be a point</source>
811 <translation>Arc tangent point is not selected</translation>
815 <name>SketchArc:ArcCenter</name>
817 <source>Attribute "%1" is locked by modification value in the viewer.</source>
818 <translation>Select a center point</translation>
822 <name>SketchArc:ArcCenter</name>
824 <source>Attribute "%1" is not initialized.</source>
825 <translation>Center point is not defined</translation>
829 <name>SketchArc:ArcEndPoint</name>
831 <source>Attribute "%1" is locked by modification value in the viewer.</source>
832 <translation>Select an end point</translation>
836 <name>SketchArc:ArcPassedPoint</name>
838 <source>Attribute "%1" is locked by modification value in the viewer.</source>
839 <translation>Select an intermediate point</translation>
843 <name>SketchArc:ArcStartPoint</name>
845 <source>Attribute "%1" is locked by modification value in the viewer.</source>
846 <translation>Select a start point</translation>
850 <name>SketchArc:GeomValidators_Different</name>
852 <source>Attributes ArcCenter and ArcStartPoint are equal.</source>
853 <translation>Center point and end point must be different</translation>
857 <name>SketchArc:GeomValidators_Different</name>
859 <source>Attributes ArcStartPoint and ArcEndPoint are equal.</source>
860 <translation>Start point and end point must be different</translation>
864 <name>SketchArc:Model_FeatureValidator</name>
866 <source>Attribute "%1" is not initialized.</source>
867 <translation>End point is not defined</translation>
871 <name>SketchArc:Model_FeatureValidator</name>
873 <source>Attribute "%1" is not initialized.</source>
874 <translation>Intermediate point is not defined</translation>
878 <name>SketchArc:ArcRadius:GeomValidators_Positive</name>
880 <source>Value is too small.</source>
881 <translation>Arc radius is too small</translation>
885 <name>SketchArc:ArcRadius:GeomValidators_Positive</name>
887 <source>Integer is not initialized.</source>
888 <translation>Integer arc radius must be set</translation>
892 <name>SketchArc:ArcRadius:GeomValidators_Positive</name>
894 <source>Integer is not positive.</source>
895 <translation>Integer arc radius must be positive</translation>
899 <name>SketchArc:Model_FeatureValidator</name>
901 <source>Attribute "%1" is not initialized.</source>
902 <translation>Select an arc center</translation>
906 <name>SketchArc:Model_FeatureValidator:ArcStartPoint</name>
908 <source>Attribute "%1" is not initialized.</source>
909 <translation>Select an arc start point</translation>
913 <name>SketchArc:Model_FeatureValidator</name>
915 <source>Attribute "%1" is not initialized.</source>
916 <translation>Select an arc end point</translation>
920 <name>SketchArc:Model_FeatureValidator</name>
922 <source>Attribute "%1" is not initialized.</source>
923 <translation>Select an arc passed point</translation>
927 <name>SketchArc:Model_FeatureValidator</name>
929 <source>Attribute "%1" is not initialized.</source>
930 <translation>Select an arc tangent point</translation>
934 <name>SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType</name>
936 <source>The object is empty</source>
937 <translation>Line is not selected</translation>
941 <name>SketchConstraintMirror:Model_FeatureValidator</name>
943 <source>Attribute "%1" is not initialized.</source>
944 <translation>Mirror line is not selected</translation>
948 <name>SketchConstraintMirror:Model_FeatureValidator</name>
950 <source>Attribute "%1" is not initialized.</source>
951 <translation>Objects for mirror are not selected</translation>
955 <name>SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType</name>
957 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
958 <translation>The mirror line references to not acceptable shape type. The type should be: %1</translation>
962 <name>SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType</name>
964 <source>It has reference to an empty attribute</source>
965 <translation>The mirror line refers to nothing</translation>
969 <name>SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType</name>
971 <source>Shape type is "%1", it should be "%2"</source>
972 <translation>The mirror line refers to %1 but must be %2</translation>
976 <name>SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType</name>
978 <source>The attribute with the %1 type is not processed</source>
979 <translation>The mirror line of type %1 is not supported</translation>
983 <name>SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType</name>
985 <source>The result is empty</source>
986 <translation>The mirror line refers to not existing item</translation>
990 <name>SketchConstraintMirror:ConstraintEntityA:GeomValidators_ShapeType</name>
992 <source>The shape is empty</source>
993 <translation>The mirror line refers to the empty shape</translation>
998 <name>SketchMultiRotation:Model_FeatureValidator</name>
1000 <source>Attribute "%1" is not initialized.</source>
1001 <translation>Type of angle is not defined</translation>
1005 <name>SketchMultiRotation:Model_FeatureValidator</name>
1007 <source>Attribute "%1" is not initialized.</source>
1008 <translation>Rotation center is not selected</translation>
1012 <name>SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType</name>
1014 <source>The object is empty</source>
1015 <translation>Rotation center is not selected</translation>
1019 <name>SketchMultiRotation:MultiRotationObjects:GeomValidators_Positive</name>
1021 <source>Double is not initialized.</source>
1022 <translation>The total number of rotated objects is not set</translation>
1026 <name>SketchMultiRotation:MultiRotationObjects:GeomValidators_Positive</name>
1028 <source>Value is too small.</source>
1029 <translation>The total number of rotated objects must be positive</translation>
1033 <name>SketchMultiRotation:MultiRotationObjects:GeomValidators_Positive</name>
1035 <source>Integer is not initialized.</source>
1036 <translation>The total number of rotated objects is not set</translation>
1040 <name>SketchMultiRotation:MultiRotationObjects:GeomValidators_Positive</name>
1042 <source>Integer is not positive.</source>
1043 <translation>The total number of rotated objects must be positive</translation>
1047 <name>SketchMultiRotation:Model_FeatureValidator</name>
1049 <source>Attribute "%1" is not initialized.</source>
1050 <translation>Select objects to rotate</translation>
1054 <name>SketchMultiRotation:Model_FeatureValidator</name>
1056 <source>Attribute "%1" is not initialized.</source>
1057 <translation>Set rotation angle</translation>
1061 <name>SketchMultiRotation:Model_FeatureValidator</name>
1063 <source>Attribute "%1" is not initialized.</source>
1064 <translation>Set the number of resulting objects</translation>
1068 <name>SketchMultiRotation:MultiRotationList:SketchPlugin_CopyValidator</name>
1070 <source>The attribute with the %1 type is not processed</source>
1071 <translation>The attribute with the %1 type is not processed</translation>
1075 <name>SketchMultiRotation:MultiRotationList:SketchPlugin_CopyValidator</name>
1077 <source>The object %1 is a result of copy</source>
1078 <translation>The object %1 is a result of copy and can not be rotated</translation>
1082 <name>SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType</name>
1084 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1085 <translation>Shape type must be %1</translation>
1089 <name>SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType</name>
1091 <source>It has reference to an empty attribute</source>
1092 <translation>The rotation center refers to nothing</translation>
1096 <name>SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType</name>
1098 <source>Shape type is "%1", it should be "%2"</source>
1099 <translation>The rotation center shape type is "%1", it should be "%2"</translation>
1103 <name>SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType</name>
1105 <source>The attribute with the %1 type is not processed</source>
1106 <translation>The attribute with the %1 type is not processed</translation>
1110 <name>SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType</name>
1112 <source>The result is empty</source>
1113 <translation>The rotation center refers to not existing item</translation>
1117 <name>SketchMultiRotation:MultiRotationCenter:GeomValidators_ShapeType</name>
1119 <source>The shape is empty</source>
1120 <translation>The rotation center refers to the empty shape</translation>
1125 <name>SketchMultiTranslation:Model_FeatureValidator</name>
1127 <source>Attribute "%1" is not initialized.</source>
1128 <translation>End point of translation vector is not defined</translation>
1132 <name>SketchMultiTranslation:Model_FeatureValidator</name>
1134 <source>Attribute "%1" is not initialized.</source>
1135 <translation>Objects for translation are not selected</translation>
1139 <name>SketchMultiTranslation:GeomValidators_ShapeType</name>
1141 <source>The object is empty</source>
1142 <translation>End point of translation vector is not selected</translation>
1146 <name>SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType</name>
1148 <source>The object is empty</source>
1149 <translation>Start point of translation vector is not selected</translation>
1154 <name>SketchMultiTranslation:MultiTranslationObjects:GeomValidators_Positive</name>
1156 <source>Double is not initialized.</source>
1157 <translation>The total number of translated objects is not set</translation>
1161 <name>SketchMultiTranslation:MultiTranslationObjects:GeomValidators_Positive</name>
1163 <source>Value is too small.</source>
1164 <translation>The total number of translated objects must be positive</translation>
1168 <name>SketchMultiTranslation:MultiTranslationObjects:GeomValidators_Positive</name>
1170 <source>Integer is not initialized.</source>
1171 <translation>The total number of translated objects is not set</translation>
1175 <name>SketchMultiTranslation:MultiTranslationObjects:GeomValidators_Positive</name>
1177 <source>Integer is not positive.</source>
1178 <translation>The total number of translated objects must be positive</translation>
1183 <name>SketchMultiTranslation:Model_FeatureValidator</name>
1185 <source>Attribute "%1" is not initialized.</source>
1186 <translation>Select a start point</translation>
1190 <name>SketchMultiTranslation:Model_FeatureValidator</name>
1192 <source>Attribute "%1" is not initialized.</source>
1193 <translation>Select a total number of objects</translation>
1197 <name>SketchMultiTranslation:MultiTranslationList:SketchPlugin_CopyValidator</name>
1199 <source>The attribute with the %1 type is not processed</source>
1200 <translation>The attribute with the %1 type is not processed</translation>
1204 <name>SketchMultiTranslation:MultiTranslationList:SketchPlugin_CopyValidator</name>
1206 <source>The object %1 is a result of copy</source>
1207 <translation>The object %1 is a result of copy and can not be translated</translation>
1211 <name>SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType</name>
1213 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1214 <translation>Shape type must be %1</translation>
1218 <name>SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType</name>
1220 <source>It has reference to an empty attribute</source>
1221 <translation>The translation start point refers to nothing</translation>
1225 <name>SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType</name>
1227 <source>Shape type is "%1", it should be "%2"</source>
1228 <translation>The translation start point shape type is "%1", it should be "%2"</translation>
1232 <name>SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType</name>
1234 <source>The attribute with the %1 type is not processed</source>
1235 <translation>The attribute with the %1 type is not processed</translation>
1239 <name>SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType</name>
1241 <source>The object is empty</source>
1242 <translation>Select a start point</translation>
1246 <name>SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType</name>
1248 <source>The result is empty</source>
1249 <translation>The start point refers to not existing item</translation>
1253 <name>SketchMultiTranslation:MultiTranslationStartPoint:GeomValidators_ShapeType</name>
1255 <source>The shape is empty</source>
1256 <translation>The start point refers to the empty shape</translation>
1260 <name>SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType</name>
1262 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1263 <translation>Shape type must be %1</translation>
1267 <name>SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType</name>
1269 <source>It has reference to an empty attribute</source>
1270 <translation>The translation end point refers to nothing</translation>
1274 <name>SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType</name>
1276 <source>Shape type is "%1", it should be "%2"</source>
1277 <translation>The translation end point shape type is "%1", it should be "%2"</translation>
1281 <name>SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType</name>
1283 <source>The attribute with the %1 type is not processed</source>
1284 <translation>The attribute with the %1 type is not processed</translation>
1288 <name>SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType</name>
1290 <source>The object is empty</source>
1291 <translation>Select an end point</translation>
1295 <name>SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType</name>
1297 <source>The result is empty</source>
1298 <translation>The end point refers to not existing item</translation>
1302 <name>SketchMultiTranslation:MultiTranslationEndPoint:GeomValidators_ShapeType</name>
1304 <source>The shape is empty</source>
1305 <translation>The end point refers to the empty shape</translation>
1310 <name>SketchConstraintAngle:ConstraintFlyoutValuePnt</name>
1312 <source>Attribute "ConstraintFlyoutValuePnt" is locked by modification value in the viewer.</source>
1313 <translation>Flyout value point is not clicked in the viewer</translation>
1317 <name>SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType</name>
1319 <source>The object is empty</source>
1320 <translation>First object is not selected</translation>
1324 <name>SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType</name>
1326 <source>The object is empty</source>
1327 <translation>Second object is not selected</translation>
1331 <name>SketchConstraintAngle:ConstraintEntityB:SketchPlugin_ExternalValidator</name>
1333 <source>Both features, attribute and attribute in parameter, are external.</source>
1334 <translation>An angle can not be created between two external objects</translation>
1338 <name>SketchConstraintAngle:Model_FeatureValidator</name>
1340 <source>Attribute "%1" is not initialized.</source>
1341 <translation>First object is not selected</translation>
1345 <name>SketchConstraintAngle:Model_FeatureValidator</name>
1347 <source>Attribute "%1" is not initialized.</source>
1348 <translation>Second object is not selected</translation>
1352 <name>SketchConstraintAngle:Model_FeatureValidator</name>
1354 <source>Attribute "%1" is not initialized.</source>
1355 <translation>Set the angle value</translation>
1359 <name>SketchConstraintAngle:Model_FeatureValidator</name>
1361 <source>Attribute "%1" is not initialized.</source>
1362 <translation>Type of angle is not set</translation>
1366 <name>SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType</name>
1368 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1369 <translation>Shape type must be %1</translation>
1373 <name>SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType</name>
1375 <source>It has reference to an empty attribute</source>
1376 <translation>The first object refers to nothing</translation>
1380 <name>SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType</name>
1382 <source>Shape type is "%1", it should be "%2"</source>
1383 <translation>The first object shape type is "%1", it should be "%2"</translation>
1387 <name>SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType</name>
1389 <source>The attribute with the %1 type is not processed</source>
1390 <translation>The attribute with the %1 type is not processed</translation>
1394 <name>SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType</name>
1396 <source>The result is empty</source>
1397 <translation>The constraint argument refers to not existing item</translation>
1401 <name>SketchConstraintAngle:ConstraintEntityA:GeomValidators_ShapeType</name>
1403 <source>The shape is empty</source>
1404 <translation>The constraint argument refers to the empty shape</translation>
1408 <name>SketchConstraintAngle:ConstraintEntityA:SketchPlugin_ExternalValidator</name>
1410 <source>Both features, attribute and attribute in parameter, are external.</source>
1411 <translation>Angle can not be created on two external entities</translation>
1415 <name>SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType</name>
1417 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1418 <translation>Shape type must be %1</translation>
1422 <name>SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType</name>
1424 <source>It has reference to an empty attribute</source>
1425 <translation>The second object refers to nothing</translation>
1429 <name>SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType</name>
1431 <source>Shape type is "%1", it should be "%2"</source>
1432 <translation>The second object shape type is "%1", it should be "%2"</translation>
1436 <name>SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType</name>
1438 <source>The attribute with the %1 type is not processed</source>
1439 <translation>The attribute with the %1 type is not processed</translation>
1443 <name>SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType</name>
1445 <source>The result is empty</source>
1446 <translation>The constraint argument refers to not existing item</translation>
1450 <name>SketchConstraintAngle:ConstraintEntityB:GeomValidators_ShapeType</name>
1452 <source>The shape is empty</source>
1453 <translation>The constraint argument refers to the empty shape</translation>
1458 <name>SketchConstraintCoincidence:ConstraintEntityA:PartSet_DifferentObjects</name>
1460 <source>The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes.</source>
1461 <translation>Different objects should be selected</translation>
1465 <name>SketchConstraintCoincidence:ConstraintEntityB:PartSet_DifferentObjects</name>
1467 <source>The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes.</source>
1468 <translation>Different objects should be selected</translation>
1472 <name>SketchConstraintCoincidence:Model_FeatureValidator</name>
1474 <source>Attribute "%1" is not initialized.</source>
1475 <translation>First object is not selected</translation>
1479 <name>SketchConstraintCoincidence:Model_FeatureValidator</name>
1481 <source>Attribute "%1" is not initialized.</source>
1482 <translation>Second object is not selected</translation>
1486 <name>SketchConstraintCoincidence:ConstraintEntityB:SketchPlugin_ExternalValidator</name>
1488 <source>Both features, attribute and attribute in parameter, are external.</source>
1489 <translation>A coincidence can not be created between two external objects</translation>
1493 <name>SketchConstraintCoincidence:ConstraintEntityA:SketchPlugin_ExternalValidator</name>
1495 <source>Both features, attribute and attribute in parameter, are external.</source>
1496 <translation>A coincidence can not be created between two external objects</translation>
1501 <name>SketchConstraintDistance:ConstraintFlyoutValuePnt</name>
1503 <source>Attribute "ConstraintFlyoutValuePnt" is locked by modification value in the viewer.</source>
1504 <translation>Flyout value point is not clicked in the viewer</translation>
1508 <name>SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType</name>
1510 <source>The object is empty</source>
1511 <translation>First object is not selected</translation>
1515 <name>SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType</name>
1517 <source>The object is empty</source>
1518 <translation>Second object is not selected</translation>
1522 <name>SketchConstraintDistance:ConstraintValue:GeomValidators_Positive</name>
1524 <source>Double is not initialized.</source>
1525 <translation>Distance value must be set</translation>
1529 <name>SketchConstraintDistance:Model_FeatureValidator</name>
1531 <source>Attribute "%1" is not initialized.</source>
1532 <translation>First object is not selected</translation>
1536 <name>SketchConstraintDistance:Model_FeatureValidator</name>
1538 <source>Attribute "%1" is not initialized.</source>
1539 <translation>Second object is not selected</translation>
1543 <name>SketchConstraintDistance:ConstraintValue:GeomValidators_Positive</name>
1545 <source>Value is too small.</source>
1546 <translation>Distance value is too small</translation>
1550 <name>SketchConstraintDistance:ConstraintValue:GeomValidators_Positive</name>
1552 <source>Integer is not initialized.</source>
1553 <translation>Integer distance value must be set</translation>
1557 <name>SketchConstraintDistance:ConstraintValue:GeomValidators_Positive</name>
1559 <source>Integer is not positive.</source>
1560 <translation>Integer distance value must be positive</translation>
1564 <name>SketchConstraintDistance:Model_FeatureValidator</name>
1566 <source>Attribute "%1" is not initialized.</source>
1567 <translation>First object is not selected</translation>
1571 <name>SketchConstraintDistance:Model_FeatureValidator</name>
1573 <source>Attribute "%1" is not initialized.</source>
1574 <translation>Second object is not selected</translation>
1578 <name>SketchConstraintDistance:Model_FeatureValidator</name>
1580 <source>Attribute "%1" is not initialized.</source>
1581 <translation>Set the distance</translation>
1585 <name>SketchConstraintDistance:ConstraintEntityA:SketchPlugin_ExternalValidator</name>
1587 <source>Both features, attribute and attribute in parameter, are external.</source>
1588 <translation>Distance can not be set between two external objects</translation>
1592 <name>SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType</name>
1594 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1595 <translation>Shape type must be %1</translation>
1599 <name>SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType</name>
1601 <source>It has reference to an empty attribute</source>
1602 <translation>The first object refers to nothing</translation>
1606 <name>SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType</name>
1608 <source>Shape type is "%1", it should be "%2"</source>
1609 <translation>The first object shape type is "%1", it should be "%2"</translation>
1613 <name>SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType</name>
1615 <source>The attribute with the %1 type is not processed</source>
1616 <translation>The attribute with the %1 type is not processed</translation>
1620 <name>SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType</name>
1622 <source>The result is empty</source>
1623 <translation>The constraint argument refers to not existing item</translation>
1627 <name>SketchConstraintDistance:ConstraintEntityA:GeomValidators_ShapeType</name>
1629 <source>The shape is empty</source>
1630 <translation>The constraint argument refers to the empty shape</translation>
1634 <name>SketchConstraintDistance:ConstraintEntityB:SketchPlugin_ExternalValidator</name>
1636 <source>Both features, attribute and attribute in parameter, are external.</source>
1637 <translation>Distance can not be set between two external objects</translation>
1641 <name>SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType</name>
1643 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1644 <translation>Shape type must be %1</translation>
1648 <name>SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType</name>
1650 <source>It has reference to an empty attribute</source>
1651 <translation>The second object refers to nothing</translation>
1655 <name>SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType</name>
1657 <source>Shape type is "%1", it should be "%2"</source>
1658 <translation>The second object shape type is "%1", it should be "%2"</translation>
1662 <name>SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType</name>
1664 <source>The attribute with the %1 type is not processed</source>
1665 <translation>The attribute with the %1 type is not processed</translation>
1669 <name>SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType</name>
1671 <source>The result is empty</source>
1672 <translation>The constraint argument refers to not existing item</translation>
1676 <name>SketchConstraintDistance:ConstraintEntityB:GeomValidators_ShapeType</name>
1678 <source>The shape is empty</source>
1679 <translation>The constraint argument refers to the empty shape</translation>
1684 <name>SketchConstraintEqual:ConstraintEntityA:PartSet_DifferentObjects</name>
1686 <source>The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes.</source>
1687 <translation>Different objects should be selected</translation>
1691 <name>SketchConstraintEqual:ConstraintEntityB:PartSet_DifferentObjects</name>
1693 <source>The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes.</source>
1694 <translation>Different objects should be selected</translation>
1698 <name>SketchConstraintEqual:ConstraintEntityB:SketchPlugin_EqualAttr</name>
1700 <source>An empty object is used.</source>
1701 <translation>An empty object is used</translation>
1704 <source>The %1 feature is not supported by the Equal constraint.</source>
1705 <translation>The %1 feature is not supported by the Equal constraint.</translation>
1708 <source>Features with kinds %1 and %2 can not be equal.</source>
1709 <translation>Features with kinds %1 and %2 can not be equal.</translation>
1713 <name>SketchConstraintEqual:Model_FeatureValidator</name>
1715 <source>Attribute "%1" is not initialized.</source>
1716 <translation>First object is not selected</translation>
1720 <name>SketchConstraintEqual:Model_FeatureValidator</name>
1722 <source>Attribute "%1" is not initialized.</source>
1723 <translation>Second object is not selected</translation>
1727 <name>SketchConstraintEqual:ConstraintEntityB:SketchPlugin_ExternalValidator</name>
1729 <source>Both features, attribute and attribute in parameter, are external.</source>
1730 <translation>An equality can not be set between two external objects</translation>
1734 <name>SketchConstraintEqual:ConstraintEntityA:SketchPlugin_ExternalValidator</name>
1736 <source>Both features, attribute and attribute in parameter, are external.</source>
1737 <translation>An equality can not be set between two external objects</translation>
1742 <name>SketchConstraintLength:ConstraintFlyoutValuePnt</name>
1744 <source>Attribute "ConstraintFlyoutValuePnt" is locked by modification value in the viewer.</source>
1745 <translation>Flyout value point is not clicked in the viewer</translation>
1749 <name>SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType</name>
1751 <source>The object is empty</source>
1752 <translation>Object is not selected</translation>
1756 <name>SketchConstraintLength:ConstraintValue:GeomValidators_Positive</name>
1758 <source>Double is not initialized.</source>
1759 <translation>Set the length value</translation>
1763 <name>SketchConstraintLength:Model_FeatureValidator</name>
1765 <source>Attribute "%1" is not initialized.</source>
1766 <translation>Line is not selected</translation>
1770 <name>SketchConstraintLength:ConstraintValue:GeomValidators_Positive</name>
1772 <source>Value is too small.</source>
1773 <translation>Length value is too small</translation>
1777 <name>SketchConstraintLength:ConstraintValue:GeomValidators_Positive</name>
1779 <source>Integer is not initialized.</source>
1780 <translation>Set the integer length value</translation>
1784 <name>SketchConstraintLength:ConstraintValue:GeomValidators_Positive</name>
1786 <source>Integer is not positive.</source>
1787 <translation>Integer length value is not positive</translation>
1792 <name>SketchConstraintLength:Model_FeatureValidator</name>
1794 <source>Attribute "%1" is not initialized.</source>
1795 <translation>Line is not selected</translation>
1799 <name>SketchConstraintLength:Model_FeatureValidator</name>
1801 <source>Attribute "%1" is not initialized.</source>
1802 <translation>Set the length value</translation>
1806 <name>SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType</name>
1808 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1809 <translation>Shape type must be %1</translation>
1813 <name>SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType</name>
1815 <source>It has reference to an empty attribute</source>
1816 <translation>The line refers to nothing</translation>
1820 <name>SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType</name>
1822 <source>Shape type is "%1", it should be "%2"</source>
1823 <translation>The line shape type is "%1", it should be "%2"</translation>
1827 <name>SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType</name>
1829 <source>The attribute with the %1 type is not processed</source>
1830 <translation>The attribute with the %1 type is not processed</translation>
1834 <name>SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType</name>
1836 <source>The result is empty</source>
1837 <translation>The constraint argument refers to not existing item</translation>
1841 <name>SketchConstraintLength:ConstraintEntityA:GeomValidators_ShapeType</name>
1843 <source>The shape is empty</source>
1844 <translation>The constraint argument refers to the empty shape</translation>
1849 <name>SketchConstraintMiddle:ConstraintEntityA:PartSet_DifferentObjects</name>
1851 <source>The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes.</source>
1852 <translation>Different objects should be selected</translation>
1856 <name>SketchConstraintMiddle:ConstraintEntityB:PartSet_DifferentObjects</name>
1858 <source>The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes.</source>
1859 <translation>Different objects should be selected</translation>
1863 <name>SketchConstraintMiddle:ConstraintEntityB:SketchPlugin_MiddlePointAttr</name>
1865 <source>Middle point constraint allows points and lines only</source>
1866 <translation>Not point or line is selected</translation>
1870 <name>SketchConstraintMiddle:Model_FeatureValidator</name>
1872 <source>Attribute "%1" is not initialized.</source>
1873 <translation>First object is not selected</translation>
1877 <name>SketchConstraintMiddle:Model_FeatureValidator</name>
1879 <source>Attribute "%1" is not initialized.</source>
1880 <translation>Second object is not selected</translation>
1884 <name>SketchConstraintMiddle:ConstraintEntityB:SketchPlugin_ExternalValidator</name>
1886 <source>Both features, attribute and attribute in parameter, are external.</source>
1887 <translation>A middle can not be set for two external objects</translation>
1891 <name>SketchConstraintMiddle:ConstraintEntityA:SketchPlugin_ExternalValidator</name>
1893 <source>Both features, attribute and attribute in parameter, are external.</source>
1894 <translation>A middle can not be set for two external objects</translation>
1899 <name>SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType</name>
1901 <source>The object is empty</source>
1902 <translation>First object is not selected</translation>
1906 <name>SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType</name>
1908 <source>The object is empty</source>
1909 <translation>Second object is not selected</translation>
1913 <name>SketchConstraintParallel:Model_FeatureValidator</name>
1915 <source>Attribute "%1" is not initialized.</source>
1916 <translation>First line is not selected</translation>
1920 <name>SketchConstraintParallel:Model_FeatureValidator</name>
1922 <source>Attribute "%1" is not initialized.</source>
1923 <translation>Second line is not selected</translation>
1927 <name>SketchConstraintParallel:ConstraintEntityB:SketchPlugin_ExternalValidator</name>
1929 <source>Both features, attribute and attribute in parameter, are external.</source>
1930 <translation>A parallel can not be set between two external objects</translation>
1934 <name>SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType</name>
1936 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1937 <translation>Shape type must be %1</translation>
1941 <name>SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType</name>
1943 <source>It has reference to an empty attribute</source>
1944 <translation>The first line refers to nothing</translation>
1948 <name>SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType</name>
1950 <source>Shape type is "%1", it should be "%2"</source>
1951 <translation>The first line shape type is "%1", it should be "%2"</translation>
1955 <name>SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType</name>
1957 <source>The attribute with the %1 type is not processed</source>
1958 <translation>The attribute with the %1 type is not processed</translation>
1962 <name>SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType</name>
1964 <source>The result is empty</source>
1965 <translation>The constraint argument refers to not existing item</translation>
1969 <name>SketchConstraintParallel:ConstraintEntityA:GeomValidators_ShapeType</name>
1971 <source>The shape is empty</source>
1972 <translation>The constraint argument refers to the empty shape</translation>
1976 <name>SketchConstraintParallel:ConstraintEntityA:SketchPlugin_ExternalValidator</name>
1978 <source>Both features, attribute and attribute in parameter, are external.</source>
1979 <translation>A parallel can not be set between two external objects</translation>
1983 <name>SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType</name>
1985 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
1986 <translation>Shape type must be %1</translation>
1990 <name>SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType</name>
1992 <source>It has reference to an empty attribute</source>
1993 <translation>The second line refers to nothing</translation>
1997 <name>SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType</name>
1999 <source>Shape type is "%1", it should be "%2"</source>
2000 <translation>The second line shape type is "%1", it should be "%2"</translation>
2004 <name>SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType</name>
2006 <source>The attribute with the %1 type is not processed</source>
2007 <translation>The attribute with the %1 type is not processed</translation>
2011 <name>SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType</name>
2013 <source>The result is empty</source>
2014 <translation>The constraint argument refers to not existing item</translation>
2018 <name>SketchConstraintParallel:ConstraintEntityB:GeomValidators_ShapeType</name>
2020 <source>The shape is empty</source>
2021 <translation>The constraint argument refers to the empty shape</translation>
2026 <name>SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType</name>
2028 <source>The object is empty</source>
2029 <translation>Object is not selected</translation>
2033 <name>SketchConstraintRigid:Model_FeatureValidator</name>
2035 <source>Attribute "%1" is not initialized.</source>
2036 <translation>Object is not selected</translation>
2040 <name>SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType</name>
2042 <source>It does not contain element with acceptable shape type. The type should be one of the next: %1</source>
2043 <translation>The fixed constraint references to not acceptable shape type. The type should be: %1</translation>
2047 <name>SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType</name>
2049 <source>It has reference to an empty attribute</source>
2050 <translation>The fixed constraint refers to nothing</translation>
2054 <name>SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType</name>
2056 <source>Shape type is "%1", it should be "%2"</source>
2057 <translation>The fixed constraint refers to %1 but must be %2</translation>
2061 <name>SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType</name>
2063 <source>The attribute with the %1 type is not processed</source>
2064 <translation>The fixed constraint of type %1 is not supported</translation>
2068 <name>SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType</name>
2070 <source>The result is empty</source>
2071 <translation>The fixed constraint refers to not existing item</translation>
2075 <name>SketchConstraintRigid:ConstraintEntityA:GeomValidators_ShapeType</name>
2077 <source>The shape is empty</source>
2078 <translation>The fixed constraint refers to the empty shape</translation>
2083 <name>SketchConstraintTangent:ConstraintEntityA:PartSet_DifferentObjects</name>
2085 <source>The feature uses one object in ConstraintEntityA and ConstraintEntityB attributes.</source>
2086 <translation>Different objects should be selected</translation>
2090 <name>SketchConstraintTangent:ConstraintEntityB:PartSet_DifferentObjects</name>
2092 <source>The feature uses one object in ConstraintEntityB and ConstraintEntityA attributes.</source>
2093 <translation>Different objects should be selected</translation>
2097 <name>SketchConstraintTangent:ConstraintEntityA:SketchPlugin_TangentAttr</name>
2099 <source>Two segments cannot be tangent</source>
2100 <translation>Two segments cannot be tangent</translation>
2104 <name>SketchConstraintTangent:ConstraintEntityB:SketchPlugin_TangentAttr</name>
2106 <source>It uses an empty object</source>
2107 <translation>Selection is not valid</translation>
2111 <name>SketchConstraintTangent:Model_FeatureValidator</name>
2113 <source>Attribute "%1" is not initialized.</source>
2114 <translation>First object is not selected</translation>
2118 <name>SketchConstraintTangent:Model_FeatureValidator</name>
2120 <source>Attribute "%1" is not initialized.</source>
2121 <translation>Second object is not selected</translation>
2126 <name>SketchConstraintSplit:ConstraintEntityA:SketchPlugin_SplitValidator</name>
2128 <source>The attribute with the %1 type is not processed</source>
2129 <translation>Only attribute selection can be used for the sketch face, not %1</translation>
2134 <name>SketchFillet:ConstraintValue:GeomValidators_Positive</name>
2136 <source>Double is not initialized.</source>
2137 <translation>Set the fillet radius</translation>
2141 <name>SketchFillet:ConstraintValue:GeomValidators_Positive</name>
2143 <source>Value is too small.</source>
2144 <translation>The fillet radius must be positive</translation>
2148 <name>SketchFillet:ConstraintValue:GeomValidators_Positive</name>
2150 <source>Integer is not initialized.</source>
2151 <translation>Set the integer fillet radius</translation>
2155 <name>SketchFillet:ConstraintValue:GeomValidators_Positive</name>
2157 <source>Integer is not positive.</source>
2158 <translation>The integer fillet radius must be positive</translation>
2162 <name>SketchFillet:Model_FeatureValidator</name>
2164 <source>Attribute "%1" is not initialized.</source>
2165 <translation>Select one or several points for filet</translation>
2169 <name>SketchFillet:Model_FeatureValidator</name>
2171 <source>Attribute "%1" is not initialized.</source>
2172 <translation>Set the fillet radius</translation>
2176 <name>SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator</name>
2178 <source>Error: List of points is empty.</source>
2179 <translation>List of points is empty</translation>
2183 <name>SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator</name>
2185 <source>Error: one of the selected point does not have coincidence.</source>
2186 <translation>One of the selected point does not have coincidence</translation>
2190 <name>SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator</name>
2192 <source>Error: One of the selected points does not have two suitable edges for fillet.</source>
2193 <translation>One of the selected points does not have two suitable edges for fillet</translation>
2197 <name>SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator</name>
2199 <source>Error: Edges in selected point has tangent constraint.</source>
2200 <translation>Edges in selected point has tangent constraint</translation>
2204 <name>SketchFillet:ConstraintEntityA:SketchPlugin_FilletVertexValidator</name>
2206 <source>Error: Edges in selected point has tangent constraint.</source>
2207 <translation>Edges in selected point has tangent constraint</translation>
2212 <name>SketchProjection:ExternalFeature:SketchPlugin_ProjectionValidator</name>
2214 <source>The attribute with the %1 type is not processed</source>
2215 <translation>An argument of type %1 of the projection feature is not supported</translation>
2218 <source>The attribute %1 should be an edge or vertex</source>
2219 <translation>The projected item must be an edge or a vertex</translation>
2222 <source>There is no sketch referring to the current feature</source>
2223 <translation>The projection feature has no sketch</translation>
2226 <source>Unable to project feature from the same sketch</source>
2227 <translation>Feature from the current sketch cannot be projected</translation>
2230 <source>Error: Line is orthogonal to the sketch plane.</source>
2231 <translation>Error: Line is orthogonal to the sketch plane.</translation>
2234 <source>Error: Circle is orthogonal to the sketch plane.</source>
2235 <translation>Error: Circle is orthogonal to the sketch plane.</translation>
2238 <source>Error: Arc is orthogonal to the sketch plane.</source>
2239 <translation>Error: Arc is orthogonal to the sketch plane.</translation>
2242 <source>Error: Ellipse is orthogonal to the sketch plane.</source>
2243 <translation>Error: Ellipse is orthogonal to the sketch plane.</translation>
2246 <source>Error: Elliptic Arc is orthogonal to the sketch plane.</source>
2247 <translation>Error: Elliptic Arc is orthogonal to the sketch plane.</translation>
2250 <source>Error: Selected object is not supported for projection.</source>
2251 <translation>Error: Selected object is not supported for projection.</translation>
2255 <name>SketchProjection:Model_FeatureValidator</name>
2257 <source>Attribute "%1" is not initialized.</source>
2258 <translation></translation>