1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D -->
3 #include <SketchPlugin_Plugin.h>
4 #include <SketchPlugin_Sketch.h>
5 #include <SketchPlugin_Line.h>
6 #include <SketchPlugin_Point.h>
7 #include <SketchPlugin_IntersectionPoint.h>
8 #include <SketchPlugin_Circle.h>
9 #include <SketchPlugin_Arc.h>
10 #include <SketchPlugin_Projection.h>
11 #include <SketchPlugin_ConstraintAngle.h>
12 #include <SketchPlugin_ConstraintCoincidence.h>
13 #include <SketchPlugin_ConstraintCollinear.h>
14 #include <SketchPlugin_ConstraintDistance.h>
15 #include <SketchPlugin_ConstraintEqual.h>
16 #include <SketchPlugin_ConstraintFillet.h>
17 #include <SketchPlugin_ConstraintSplit.h>
18 #include <SketchPlugin_ConstraintHorizontal.h>
19 #include <SketchPlugin_ConstraintLength.h>
20 #include <SketchPlugin_ConstraintMiddle.h>
21 #include <SketchPlugin_ConstraintMirror.h>
22 #include <SketchPlugin_ConstraintParallel.h>
23 #include <SketchPlugin_ConstraintPerpendicular.h>
24 #include <SketchPlugin_ConstraintRadius.h>
25 #include <SketchPlugin_ConstraintRigid.h>
26 #include <SketchPlugin_ConstraintTangent.h>
27 #include <SketchPlugin_ConstraintVertical.h>
28 #include <SketchPlugin_MultiRotation.h>
29 #include <SketchPlugin_MultiTranslation.h>
30 #include <SketchPlugin_Trim.h>
31 #include <SketchPlugin_Validators.h>
32 #include <SketchPlugin_ExternalValidator.h>
34 #include <Events_Loop.h>
35 #include <GeomDataAPI_Dir.h>
37 #include <ModelAPI_Session.h>
38 #include <ModelAPI_Document.h>
39 #include <ModelAPI_Validator.h>
40 #include <ModelAPI_Data.h>
42 #include <Config_PropManager.h>
50 //#define SET_PLANES_COLOR_IN_PREFERENCES
52 // the only created instance of this plugin
53 static SketchPlugin_Plugin* MY_SKETCH_INSTANCE = new SketchPlugin_Plugin();
55 SketchPlugin_Plugin::SketchPlugin_Plugin()
57 SessionPtr aMgr = ModelAPI_Session::get();
58 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
59 aFactory->registerValidator("SketchPlugin_DistanceAttr",
60 new SketchPlugin_DistanceAttrValidator);
61 aFactory->registerValidator("SketchPlugin_ExternalValidator",
62 new SketchPlugin_ExternalValidator);
63 aFactory->registerValidator("SketchPlugin_TangentAttr",
64 new SketchPlugin_TangentAttrValidator);
65 aFactory->registerValidator("SketchPlugin_NotFixed",
66 new SketchPlugin_NotFixedValidator);
67 aFactory->registerValidator("SketchPlugin_EqualAttr",
68 new SketchPlugin_EqualAttrValidator);
69 aFactory->registerValidator("SketchPlugin_MirrorAttr",
70 new SketchPlugin_MirrorAttrValidator);
71 aFactory->registerValidator("SketchPlugin_CoincidenceAttr",
72 new SketchPlugin_CoincidenceAttrValidator);
73 aFactory->registerValidator("SketchPlugin_CopyValidator",
74 new SketchPlugin_CopyValidator);
75 aFactory->registerValidator("SketchPlugin_SolverErrorValidator",
76 new SketchPlugin_SolverErrorValidator);
77 aFactory->registerValidator("SketchPlugin_FilletVertexValidator",
78 new SketchPlugin_FilletVertexValidator);
79 aFactory->registerValidator("SketchPlugin_SplitValidator",
80 new SketchPlugin_SplitValidator);
81 aFactory->registerValidator("SketchPlugin_MiddlePointAttr",
82 new SketchPlugin_MiddlePointAttrValidator);
83 aFactory->registerValidator("SketchPlugin_ArcTangentPoint",
84 new SketchPlugin_ArcTangentPointValidator);
85 aFactory->registerValidator("SketchPlugin_IntersectionValidator",
86 new SketchPlugin_IntersectionValidator);
87 aFactory->registerValidator("SketchPlugin_ProjectionValidator",
88 new SketchPlugin_ProjectionValidator);
90 // register this plugin
91 ModelAPI_Session::get()->registerPlugin(this);
93 Config_PropManager::registerProp("Visualization", "sketch_entity_color",
94 "Sketch entity color",
95 Config_Prop::Color, SKETCH_ENTITY_COLOR);
97 Config_PropManager::registerProp("Visualization", "sketch_external_color",
98 "Sketch external entity color",
99 Config_Prop::Color, SKETCH_EXTERNAL_COLOR);
101 Config_PropManager::registerProp("Visualization", "sketch_auxiliary_color",
102 "Sketch auxiliary entity color",
103 Config_Prop::Color, SKETCH_AUXILIARY_COLOR);
105 Config_PropManager::registerProp("Visualization", "sketch_dimension_color",
106 "Sketch dimension color",
107 Config_Prop::Color, SKETCH_DIMENSION_COLOR);
109 Config_PropManager::registerProp("Visualization", "sketch_overconstraint_color",
110 "Sketch overconstraint color",
111 Config_Prop::Color, SKETCH_OVERCONSTRAINT_COLOR);
113 // register sketcher properties
114 #ifdef SET_PLANES_COLOR_IN_PREFERENCES
115 Config_PropManager::registerProp("Visualization", "yz_plane_color", "YZ plane color",
116 Config_Prop::Color, YZ_PLANE_COLOR);
117 Config_PropManager::registerProp("Visualization", "xz_plane_color", "XZ plane color",
118 Config_Prop::Color, XZ_PLANE_COLOR);
119 Config_PropManager::registerProp("Visualization", "xy_plane_color", "XY plane color",
120 Config_Prop::Color, XY_PLANE_COLOR);
124 FeaturePtr SketchPlugin_Plugin::createFeature(std::string theFeatureID)
126 if (theFeatureID == SketchPlugin_Sketch::ID()) {
127 return FeaturePtr(new SketchPlugin_Sketch);
128 } else if (theFeatureID == SketchPlugin_Point::ID()) {
129 return FeaturePtr(new SketchPlugin_Point);
130 } else if (theFeatureID == SketchPlugin_IntersectionPoint::ID()) {
131 return FeaturePtr(new SketchPlugin_IntersectionPoint);
132 } else if (theFeatureID == SketchPlugin_Line::ID()) {
133 return FeaturePtr(new SketchPlugin_Line);
134 } else if (theFeatureID == SketchPlugin_Circle::ID()) {
135 return FeaturePtr(new SketchPlugin_Circle);
136 } else if (theFeatureID == SketchPlugin_Arc::ID()) {
137 return FeaturePtr(new SketchPlugin_Arc);
138 } else if (theFeatureID == SketchPlugin_Projection::ID()) {
139 return FeaturePtr(new SketchPlugin_Projection);
140 } else if (theFeatureID == SketchPlugin_ConstraintCoincidence::ID()) {
141 return FeaturePtr(new SketchPlugin_ConstraintCoincidence);
142 } else if (theFeatureID == SketchPlugin_ConstraintCollinear::ID()) {
143 return FeaturePtr(new SketchPlugin_ConstraintCollinear);
144 } else if (theFeatureID == SketchPlugin_ConstraintDistance::ID()) {
145 return FeaturePtr(new SketchPlugin_ConstraintDistance);
146 } else if (theFeatureID == SketchPlugin_ConstraintLength::ID()) {
147 return FeaturePtr(new SketchPlugin_ConstraintLength);
148 } else if (theFeatureID == SketchPlugin_ConstraintParallel::ID()) {
149 return FeaturePtr(new SketchPlugin_ConstraintParallel);
150 } else if (theFeatureID == SketchPlugin_ConstraintPerpendicular::ID()) {
151 return FeaturePtr(new SketchPlugin_ConstraintPerpendicular);
152 } else if (theFeatureID == SketchPlugin_ConstraintRadius::ID()) {
153 return FeaturePtr(new SketchPlugin_ConstraintRadius);
154 } else if (theFeatureID == SketchPlugin_ConstraintRigid::ID()) {
155 return FeaturePtr(new SketchPlugin_ConstraintRigid);
156 } else if (theFeatureID == SketchPlugin_ConstraintHorizontal::ID()) {
157 return FeaturePtr(new SketchPlugin_ConstraintHorizontal);
158 } else if (theFeatureID == SketchPlugin_ConstraintVertical::ID()) {
159 return FeaturePtr(new SketchPlugin_ConstraintVertical);
160 } else if (theFeatureID == SketchPlugin_ConstraintEqual::ID()) {
161 return FeaturePtr(new SketchPlugin_ConstraintEqual);
162 } else if (theFeatureID == SketchPlugin_ConstraintTangent::ID()) {
163 return FeaturePtr(new SketchPlugin_ConstraintTangent);
164 } else if (theFeatureID == SketchPlugin_ConstraintMiddle::ID()) {
165 return FeaturePtr(new SketchPlugin_ConstraintMiddle);
166 } else if (theFeatureID == SketchPlugin_ConstraintMirror::ID()) {
167 return FeaturePtr(new SketchPlugin_ConstraintMirror);
168 } else if (theFeatureID == SketchPlugin_ConstraintFillet::ID()) {
169 return FeaturePtr(new SketchPlugin_ConstraintFillet);
170 } else if (theFeatureID == SketchPlugin_ConstraintSplit::ID()) {
171 return FeaturePtr(new SketchPlugin_ConstraintSplit);
172 } else if (theFeatureID == SketchPlugin_MultiTranslation::ID()) {
173 return FeaturePtr(new SketchPlugin_MultiTranslation);
174 } else if (theFeatureID == SketchPlugin_MultiRotation::ID()) {
175 return FeaturePtr(new SketchPlugin_MultiRotation);
176 } else if (theFeatureID == SketchPlugin_ConstraintAngle::ID()) {
177 return FeaturePtr(new SketchPlugin_ConstraintAngle);
178 } else if (theFeatureID == SketchPlugin_Trim::ID()) {
179 return FeaturePtr(new SketchPlugin_Trim);
181 // feature of such kind is not found
185 void SketchPlugin_Plugin::processEvent(const std::shared_ptr<Events_Message>& theMessage)
187 const Events_ID kRequestEvent =
188 Events_Loop::loop()->eventByName(EVENT_FEATURE_STATE_REQUEST);
189 if (theMessage->eventID() == kRequestEvent) {
190 std::shared_ptr<ModelAPI_FeatureStateMessage> aStateMessage =
191 std::dynamic_pointer_cast<ModelAPI_FeatureStateMessage>(theMessage);
192 Events_Loop::loop()->send(getFeaturesState(aStateMessage->feature()), false);
196 std::shared_ptr<ModelAPI_FeatureStateMessage> SketchPlugin_Plugin
197 ::getFeaturesState(const std::shared_ptr<ModelAPI_Feature>& theFeature) const
199 const Events_ID kResponseEvent = Events_Loop::loop()->eventByName(EVENT_FEATURE_STATE_RESPONSE);
200 std::shared_ptr<ModelAPI_FeatureStateMessage> aMsg(
201 new ModelAPI_FeatureStateMessage(kResponseEvent, this));
203 bool aHasSketchPlane = false;
204 std::shared_ptr<SketchPlugin_Sketch> aSketchFeature =
205 std::dynamic_pointer_cast<SketchPlugin_Sketch>(theFeature);
206 if (aSketchFeature.get()) {
207 std::shared_ptr<ModelAPI_Data> aData = aSketchFeature->data();
209 std::shared_ptr<GeomDataAPI_Dir> aNormal =
210 std::dynamic_pointer_cast<GeomDataAPI_Dir>(
211 aData->attribute(SketchPlugin_Sketch::NORM_ID()));
212 // it is important to check whether the normal attribute is initialized
213 // because it is possible that normal values are filled when the plane is checked on validity
214 aHasSketchPlane = aNormal && aNormal->isInitialized() &&
215 !(aNormal->x() == 0 && aNormal->y() == 0 && aNormal->z() == 0);
217 aMsg->setState(SketchPlugin_Point::ID(), aHasSketchPlane);
218 aMsg->setState(SketchPlugin_IntersectionPoint::ID(), aHasSketchPlane);
219 aMsg->setState(SketchPlugin_Line::ID(), aHasSketchPlane);
220 aMsg->setState(SketchPlugin_Circle::ID(), aHasSketchPlane);
221 aMsg->setState(SketchPlugin_Arc::ID(), aHasSketchPlane);
222 aMsg->setState(SketchPlugin_Projection::ID(), aHasSketchPlane);
223 aMsg->setState(SketchPlugin_ConstraintCoincidence::ID(), aHasSketchPlane);
224 aMsg->setState(SketchPlugin_ConstraintCollinear::ID(), aHasSketchPlane);
225 aMsg->setState(SketchPlugin_ConstraintDistance::ID(), aHasSketchPlane);
226 aMsg->setState(SketchPlugin_ConstraintLength::ID(), aHasSketchPlane);
227 aMsg->setState(SketchPlugin_ConstraintParallel::ID(), aHasSketchPlane);
228 aMsg->setState(SketchPlugin_ConstraintPerpendicular::ID(), aHasSketchPlane);
229 aMsg->setState(SketchPlugin_ConstraintRadius::ID(), aHasSketchPlane);
230 aMsg->setState(SketchPlugin_ConstraintRigid::ID(), aHasSketchPlane);
231 aMsg->setState(SketchPlugin_ConstraintHorizontal::ID(), aHasSketchPlane);
232 aMsg->setState(SketchPlugin_ConstraintVertical::ID(), aHasSketchPlane);
233 aMsg->setState(SketchPlugin_ConstraintEqual::ID(), aHasSketchPlane);
234 aMsg->setState(SketchPlugin_ConstraintTangent::ID(), aHasSketchPlane);
235 aMsg->setState(SketchPlugin_ConstraintMiddle::ID(), aHasSketchPlane);
236 aMsg->setState(SketchPlugin_ConstraintMirror::ID(), aHasSketchPlane);
237 aMsg->setState(SketchPlugin_ConstraintFillet::ID(), aHasSketchPlane);
238 aMsg->setState(SketchPlugin_ConstraintSplit::ID(), aHasSketchPlane);
239 aMsg->setState(SketchPlugin_ConstraintAngle::ID(), aHasSketchPlane);
240 aMsg->setState(SketchPlugin_MultiRotation::ID(), aHasSketchPlane);
241 aMsg->setState(SketchPlugin_MultiTranslation::ID(), aHasSketchPlane);
242 aMsg->setState(SketchPlugin_Trim::ID(), aHasSketchPlane);
243 // SketchRectangle is a python feature, so its ID is passed just as a string
244 aMsg->setState("SketchRectangle", aHasSketchPlane);