1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D -->
3 #include <SketchPlugin_Plugin.h>
4 #include <SketchPlugin_Sketch.h>
5 #include <SketchPlugin_Line.h>
6 #include <SketchPlugin_Point.h>
7 #include <SketchPlugin_IntersectionPoint.h>
8 #include <SketchPlugin_Circle.h>
9 #include <SketchPlugin_Arc.h>
10 #include <SketchPlugin_Projection.h>
11 #include <SketchPlugin_ConstraintAngle.h>
12 #include <SketchPlugin_ConstraintCoincidence.h>
13 #include <SketchPlugin_ConstraintCollinear.h>
14 #include <SketchPlugin_ConstraintDistance.h>
15 #include <SketchPlugin_ConstraintEqual.h>
16 #include <SketchPlugin_Fillet.h>
17 #include <SketchPlugin_ConstraintSplit.h>
18 #include <SketchPlugin_ConstraintHorizontal.h>
19 #include <SketchPlugin_ConstraintLength.h>
20 #include <SketchPlugin_ConstraintMiddle.h>
21 #include <SketchPlugin_ConstraintMirror.h>
22 #include <SketchPlugin_ConstraintParallel.h>
23 #include <SketchPlugin_ConstraintPerpendicular.h>
24 #include <SketchPlugin_ConstraintRadius.h>
25 #include <SketchPlugin_ConstraintRigid.h>
26 #include <SketchPlugin_ConstraintTangent.h>
27 #include <SketchPlugin_ConstraintVertical.h>
28 #include <SketchPlugin_MacroArc.h>
29 #include <SketchPlugin_MacroCircle.h>
30 #include <SketchPlugin_MultiRotation.h>
31 #include <SketchPlugin_MultiTranslation.h>
32 #include <SketchPlugin_Trim.h>
33 #include <SketchPlugin_Validators.h>
34 #include <SketchPlugin_ExternalValidator.h>
35 #include <SketchPlugin_Ellipse.h>
36 #include <SketchPlugin_MacroEllipse.h>
38 #include <Events_Loop.h>
39 #include <GeomDataAPI_Dir.h>
41 #include <ModelAPI_Session.h>
42 #include <ModelAPI_Document.h>
43 #include <ModelAPI_Validator.h>
44 #include <ModelAPI_Data.h>
46 #include <Config_PropManager.h>
54 #define SKETCH_ENTITY_COLOR "225,0,0"
55 #define SKETCH_EXTERNAL_COLOR "170,0,225"
56 #define SKETCH_AUXILIARY_COLOR "0,85,0"
57 #define SKETCH_OVERCONSTRAINT_COLOR "0,0,0"
58 #define SKETCH_FULLY_CONSTRAINED_COLOR "0,150,0"
60 //#define SET_PLANES_COLOR_IN_PREFERENCES
62 // the only created instance of this plugin
63 static SketchPlugin_Plugin* MY_SKETCH_INSTANCE = new SketchPlugin_Plugin();
65 SketchPlugin_Plugin::SketchPlugin_Plugin()
67 SessionPtr aMgr = ModelAPI_Session::get();
68 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
69 aFactory->registerValidator("SketchPlugin_DistanceAttr",
70 new SketchPlugin_DistanceAttrValidator);
71 aFactory->registerValidator("SketchPlugin_ExternalValidator",
72 new SketchPlugin_ExternalValidator);
73 aFactory->registerValidator("SketchPlugin_TangentAttr",
74 new SketchPlugin_TangentAttrValidator);
75 aFactory->registerValidator("SketchPlugin_NotFixed",
76 new SketchPlugin_NotFixedValidator);
77 aFactory->registerValidator("SketchPlugin_EqualAttr",
78 new SketchPlugin_EqualAttrValidator);
79 aFactory->registerValidator("SketchPlugin_MirrorAttr",
80 new SketchPlugin_MirrorAttrValidator);
81 aFactory->registerValidator("SketchPlugin_CoincidenceAttr",
82 new SketchPlugin_CoincidenceAttrValidator);
83 aFactory->registerValidator("SketchPlugin_CopyValidator",
84 new SketchPlugin_CopyValidator);
85 aFactory->registerValidator("SketchPlugin_SolverErrorValidator",
86 new SketchPlugin_SolverErrorValidator);
87 aFactory->registerValidator("SketchPlugin_FilletVertexValidator",
88 new SketchPlugin_FilletVertexValidator);
89 aFactory->registerValidator("SketchPlugin_SplitValidator",
90 new SketchPlugin_SplitValidator);
91 aFactory->registerValidator("SketchPlugin_TrimValidator",
92 new SketchPlugin_TrimValidator);
93 aFactory->registerValidator("SketchPlugin_MiddlePointAttr",
94 new SketchPlugin_MiddlePointAttrValidator);
95 aFactory->registerValidator("SketchPlugin_ArcTangentPoint",
96 new SketchPlugin_ArcTangentPointValidator);
97 aFactory->registerValidator("SketchPlugin_IntersectionValidator",
98 new SketchPlugin_IntersectionValidator);
99 aFactory->registerValidator("SketchPlugin_ProjectionValidator",
100 new SketchPlugin_ProjectionValidator);
101 aFactory->registerValidator("SketchPlugin_DifferentReference",
102 new SketchPlugin_DifferentReferenceValidator);
103 aFactory->registerValidator("SketchPlugin_DifferentPointReference",
104 new SketchPlugin_DifferentPointReferenceValidator);
105 aFactory->registerValidator("SketchPlugin_CirclePassedPointValidator",
106 new SketchPlugin_CirclePassedPointValidator);
107 aFactory->registerValidator("SketchPlugin_ThirdPointValidator",
108 new SketchPlugin_ThirdPointValidator);
109 aFactory->registerValidator("SketchPlugin_ArcEndPointValidator",
110 new SketchPlugin_ArcEndPointValidator);
111 aFactory->registerValidator("SketchPlugin_ArcEndPointIntersectionValidator",
112 new SketchPlugin_ArcEndPointIntersectionValidator);
113 aFactory->registerValidator("SketchPlugin_HasNoConstraint", new SketchPlugin_HasNoConstraint);
115 // register this plugin
116 ModelAPI_Session::get()->registerPlugin(this);
118 Config_PropManager::registerProp("Visualization", "sketch_entity_color",
119 "Sketch entity color",
120 Config_Prop::Color, SKETCH_ENTITY_COLOR);
122 Config_PropManager::registerProp("Visualization", "sketch_external_color",
123 "Sketch external entity color",
124 Config_Prop::Color, SKETCH_EXTERNAL_COLOR);
126 Config_PropManager::registerProp("Visualization", "sketch_auxiliary_color",
127 "Sketch auxiliary entity color",
128 Config_Prop::Color, SKETCH_AUXILIARY_COLOR);
130 Config_PropManager::registerProp("Visualization", "sketch_dimension_color",
131 "Sketch dimension color",
132 Config_Prop::Color, SKETCH_DIMENSION_COLOR);
134 Config_PropManager::registerProp("Visualization", "sketch_overconstraint_color",
135 "Sketch overconstraint color",
136 Config_Prop::Color, SKETCH_OVERCONSTRAINT_COLOR);
138 Config_PropManager::registerProp("Visualization", "sketch_fully_constrained_color",
139 "Sketch fully constrained color",
140 Config_Prop::Color, SKETCH_FULLY_CONSTRAINED_COLOR);
142 // register sketcher properties
143 #ifdef SET_PLANES_COLOR_IN_PREFERENCES
144 Config_PropManager::registerProp("Visualization", "yz_plane_color", "YZ plane color",
145 Config_Prop::Color, YZ_PLANE_COLOR);
146 Config_PropManager::registerProp("Visualization", "xz_plane_color", "XZ plane color",
147 Config_Prop::Color, XZ_PLANE_COLOR);
148 Config_PropManager::registerProp("Visualization", "xy_plane_color", "XY plane color",
149 Config_Prop::Color, XY_PLANE_COLOR);
153 FeaturePtr SketchPlugin_Plugin::createFeature(std::string theFeatureID)
155 if (theFeatureID == SketchPlugin_Sketch::ID()) {
156 return FeaturePtr(new SketchPlugin_Sketch);
157 } else if (theFeatureID == SketchPlugin_Point::ID()) {
158 return FeaturePtr(new SketchPlugin_Point);
159 } else if (theFeatureID == SketchPlugin_IntersectionPoint::ID()) {
160 return FeaturePtr(new SketchPlugin_IntersectionPoint);
161 } else if (theFeatureID == SketchPlugin_Line::ID()) {
162 return FeaturePtr(new SketchPlugin_Line);
163 } else if (theFeatureID == SketchPlugin_Circle::ID()) {
164 return FeaturePtr(new SketchPlugin_Circle);
165 } else if (theFeatureID == SketchPlugin_Arc::ID()) {
166 return FeaturePtr(new SketchPlugin_Arc);
167 } else if (theFeatureID == SketchPlugin_Projection::ID()) {
168 return FeaturePtr(new SketchPlugin_Projection);
169 } else if (theFeatureID == SketchPlugin_ConstraintCoincidence::ID()) {
170 return FeaturePtr(new SketchPlugin_ConstraintCoincidence);
171 } else if (theFeatureID == SketchPlugin_ConstraintCollinear::ID()) {
172 return FeaturePtr(new SketchPlugin_ConstraintCollinear);
173 } else if (theFeatureID == SketchPlugin_ConstraintDistance::ID()) {
174 return FeaturePtr(new SketchPlugin_ConstraintDistance);
175 } else if (theFeatureID == SketchPlugin_ConstraintLength::ID()) {
176 return FeaturePtr(new SketchPlugin_ConstraintLength);
177 } else if (theFeatureID == SketchPlugin_ConstraintParallel::ID()) {
178 return FeaturePtr(new SketchPlugin_ConstraintParallel);
179 } else if (theFeatureID == SketchPlugin_ConstraintPerpendicular::ID()) {
180 return FeaturePtr(new SketchPlugin_ConstraintPerpendicular);
181 } else if (theFeatureID == SketchPlugin_ConstraintRadius::ID()) {
182 return FeaturePtr(new SketchPlugin_ConstraintRadius);
183 } else if (theFeatureID == SketchPlugin_ConstraintRigid::ID()) {
184 return FeaturePtr(new SketchPlugin_ConstraintRigid);
185 } else if (theFeatureID == SketchPlugin_ConstraintHorizontal::ID()) {
186 return FeaturePtr(new SketchPlugin_ConstraintHorizontal);
187 } else if (theFeatureID == SketchPlugin_ConstraintVertical::ID()) {
188 return FeaturePtr(new SketchPlugin_ConstraintVertical);
189 } else if (theFeatureID == SketchPlugin_ConstraintEqual::ID()) {
190 return FeaturePtr(new SketchPlugin_ConstraintEqual);
191 } else if (theFeatureID == SketchPlugin_ConstraintTangent::ID()) {
192 return FeaturePtr(new SketchPlugin_ConstraintTangent);
193 } else if (theFeatureID == SketchPlugin_ConstraintMiddle::ID()) {
194 return FeaturePtr(new SketchPlugin_ConstraintMiddle);
195 } else if (theFeatureID == SketchPlugin_ConstraintMirror::ID()) {
196 return FeaturePtr(new SketchPlugin_ConstraintMirror);
197 } else if (theFeatureID == SketchPlugin_Fillet::ID()) {
198 return FeaturePtr(new SketchPlugin_Fillet);
199 } else if (theFeatureID == SketchPlugin_ConstraintSplit::ID()) {
200 return FeaturePtr(new SketchPlugin_ConstraintSplit);
201 } else if (theFeatureID == SketchPlugin_MultiTranslation::ID()) {
202 return FeaturePtr(new SketchPlugin_MultiTranslation);
203 } else if (theFeatureID == SketchPlugin_MultiRotation::ID()) {
204 return FeaturePtr(new SketchPlugin_MultiRotation);
205 } else if (theFeatureID == SketchPlugin_ConstraintAngle::ID()) {
206 return FeaturePtr(new SketchPlugin_ConstraintAngle);
207 } else if (theFeatureID == SketchPlugin_Trim::ID()) {
208 return FeaturePtr(new SketchPlugin_Trim);
209 } else if (theFeatureID == SketchPlugin_MacroArc::ID()) {
210 return FeaturePtr(new SketchPlugin_MacroArc);
211 } else if (theFeatureID == SketchPlugin_MacroCircle::ID()) {
212 return FeaturePtr(new SketchPlugin_MacroCircle);
213 } else if (theFeatureID == SketchPlugin_Ellipse::ID()) {
214 return FeaturePtr(new SketchPlugin_Ellipse);
215 } else if (theFeatureID == SketchPlugin_MacroEllipse::ID()) {
216 return FeaturePtr(new SketchPlugin_MacroEllipse);
218 // feature of such kind is not found
222 void SketchPlugin_Plugin::processEvent(const std::shared_ptr<Events_Message>& theMessage)
224 const Events_ID kRequestEvent =
225 Events_Loop::loop()->eventByName(EVENT_FEATURE_STATE_REQUEST);
226 if (theMessage->eventID() == kRequestEvent) {
227 std::shared_ptr<ModelAPI_FeatureStateMessage> aStateMessage =
228 std::dynamic_pointer_cast<ModelAPI_FeatureStateMessage>(theMessage);
229 Events_Loop::loop()->send(getFeaturesState(aStateMessage->feature()), false);
233 std::shared_ptr<ModelAPI_FeatureStateMessage> SketchPlugin_Plugin
234 ::getFeaturesState(const std::shared_ptr<ModelAPI_Feature>& theFeature) const
236 const Events_ID kResponseEvent = Events_Loop::loop()->eventByName(EVENT_FEATURE_STATE_RESPONSE);
237 std::shared_ptr<ModelAPI_FeatureStateMessage> aMsg(
238 new ModelAPI_FeatureStateMessage(kResponseEvent, this));
240 bool aHasSketchPlane = false;
241 std::shared_ptr<SketchPlugin_Sketch> aSketchFeature =
242 std::dynamic_pointer_cast<SketchPlugin_Sketch>(theFeature);
243 if (aSketchFeature.get()) {
244 std::shared_ptr<ModelAPI_Data> aData = aSketchFeature->data();
246 std::shared_ptr<GeomDataAPI_Dir> aNormal =
247 std::dynamic_pointer_cast<GeomDataAPI_Dir>(
248 aData->attribute(SketchPlugin_Sketch::NORM_ID()));
249 // it is important to check whether the normal attribute is initialized
250 // because it is possible that normal values are filled when the plane is checked on validity
251 aHasSketchPlane = aNormal && aNormal->isInitialized() &&
252 !(aNormal->x() == 0 && aNormal->y() == 0 && aNormal->z() == 0);
254 aMsg->setState(SketchPlugin_Point::ID(), aHasSketchPlane);
255 aMsg->setState(SketchPlugin_IntersectionPoint::ID(), aHasSketchPlane);
256 aMsg->setState(SketchPlugin_Line::ID(), aHasSketchPlane);
257 aMsg->setState(SketchPlugin_Circle::ID(), aHasSketchPlane);
258 aMsg->setState(SketchPlugin_Arc::ID(), aHasSketchPlane);
259 aMsg->setState(SketchPlugin_Projection::ID(), aHasSketchPlane);
260 aMsg->setState(SketchPlugin_ConstraintCoincidence::ID(), aHasSketchPlane);
261 aMsg->setState(SketchPlugin_ConstraintCollinear::ID(), aHasSketchPlane);
262 aMsg->setState(SketchPlugin_ConstraintDistance::ID(), aHasSketchPlane);
263 aMsg->setState(SketchPlugin_ConstraintLength::ID(), aHasSketchPlane);
264 aMsg->setState(SketchPlugin_ConstraintParallel::ID(), aHasSketchPlane);
265 aMsg->setState(SketchPlugin_ConstraintPerpendicular::ID(), aHasSketchPlane);
266 aMsg->setState(SketchPlugin_ConstraintRadius::ID(), aHasSketchPlane);
267 aMsg->setState(SketchPlugin_ConstraintRigid::ID(), aHasSketchPlane);
268 aMsg->setState(SketchPlugin_ConstraintHorizontal::ID(), aHasSketchPlane);
269 aMsg->setState(SketchPlugin_ConstraintVertical::ID(), aHasSketchPlane);
270 aMsg->setState(SketchPlugin_ConstraintEqual::ID(), aHasSketchPlane);
271 aMsg->setState(SketchPlugin_ConstraintTangent::ID(), aHasSketchPlane);
272 aMsg->setState(SketchPlugin_ConstraintMiddle::ID(), aHasSketchPlane);
273 aMsg->setState(SketchPlugin_ConstraintMirror::ID(), aHasSketchPlane);
274 aMsg->setState(SketchPlugin_Fillet::ID(), aHasSketchPlane);
275 aMsg->setState(SketchPlugin_ConstraintSplit::ID(), aHasSketchPlane);
276 aMsg->setState(SketchPlugin_ConstraintAngle::ID(), aHasSketchPlane);
277 aMsg->setState(SketchPlugin_MultiRotation::ID(), aHasSketchPlane);
278 aMsg->setState(SketchPlugin_MultiTranslation::ID(), aHasSketchPlane);
279 aMsg->setState(SketchPlugin_Trim::ID(), aHasSketchPlane);
280 aMsg->setState(SketchPlugin_MacroArc::ID(), aHasSketchPlane);
281 aMsg->setState(SketchPlugin_MacroCircle::ID(), aHasSketchPlane);
282 // SketchRectangle is a python feature, so its ID is passed just as a string
283 aMsg->setState("SketchRectangle", aHasSketchPlane);