src/SketchPlugin/SketchPlugin_Plugin.cpp

   1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D -->
   2
   3 #include <SketchPlugin_Plugin.h>
   4 #include <SketchPlugin_Sketch.h>
   5 #include <SketchPlugin_Line.h>
   6 #include <SketchPlugin_Point.h>
   7 #include <SketchPlugin_IntersectionPoint.h>
   8 #include <SketchPlugin_Circle.h>
   9 #include <SketchPlugin_Arc.h>
  10 #include <SketchPlugin_Projection.h>
  11 #include <SketchPlugin_ConstraintAngle.h>
  12 #include <SketchPlugin_ConstraintCoincidence.h>
  13 #include <SketchPlugin_ConstraintCollinear.h>
  14 #include <SketchPlugin_ConstraintDistance.h>
  15 #include <SketchPlugin_ConstraintEqual.h>
  16 #include <SketchPlugin_Fillet.h>
  17 #include <SketchPlugin_ConstraintSplit.h>
  18 #include <SketchPlugin_ConstraintHorizontal.h>
  19 #include <SketchPlugin_ConstraintLength.h>
  20 #include <SketchPlugin_ConstraintMiddle.h>
  21 #include <SketchPlugin_ConstraintMirror.h>
  22 #include <SketchPlugin_ConstraintParallel.h>
  23 #include <SketchPlugin_ConstraintPerpendicular.h>
  24 #include <SketchPlugin_ConstraintRadius.h>
  25 #include <SketchPlugin_ConstraintRigid.h>
  26 #include <SketchPlugin_ConstraintTangent.h>
  27 #include <SketchPlugin_ConstraintVertical.h>
  28 #include <SketchPlugin_MultiRotation.h>
  29 #include <SketchPlugin_MultiTranslation.h>
  30 #include <SketchPlugin_Trim.h>
  31 #include <SketchPlugin_Validators.h>
  32 #include <SketchPlugin_ExternalValidator.h>
  33
  34 #include <Events_Loop.h>
  35 #include <GeomDataAPI_Dir.h>
  36
  37 #include <ModelAPI_Session.h>
  38 #include <ModelAPI_Document.h>
  39 #include <ModelAPI_Validator.h>
  40 #include <ModelAPI_Data.h>
  41
  42 #include <Config_PropManager.h>
  43
  44 #include <memory>
  45
  46 #ifdef _DEBUG
  47 #include <iostream>
  48 #endif
  49
  50 //#define SET_PLANES_COLOR_IN_PREFERENCES
  51
  52 // the only created instance of this plugin
  53 static SketchPlugin_Plugin* MY_SKETCH_INSTANCE = new SketchPlugin_Plugin();
  54
  55 SketchPlugin_Plugin::SketchPlugin_Plugin()
  56 {
  57   SessionPtr aMgr = ModelAPI_Session::get();
  58   ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
  59   aFactory->registerValidator("SketchPlugin_DistanceAttr",
  60                               new SketchPlugin_DistanceAttrValidator);
  61   aFactory->registerValidator("SketchPlugin_ExternalValidator",
  62                               new SketchPlugin_ExternalValidator);
  63   aFactory->registerValidator("SketchPlugin_TangentAttr",
  64                               new SketchPlugin_TangentAttrValidator);
  65   aFactory->registerValidator("SketchPlugin_NotFixed",
  66                               new SketchPlugin_NotFixedValidator);
  67   aFactory->registerValidator("SketchPlugin_EqualAttr",
  68                               new SketchPlugin_EqualAttrValidator);
  69   aFactory->registerValidator("SketchPlugin_MirrorAttr",
  70                               new SketchPlugin_MirrorAttrValidator);
  71   aFactory->registerValidator("SketchPlugin_CoincidenceAttr",
  72                               new SketchPlugin_CoincidenceAttrValidator);
  73   aFactory->registerValidator("SketchPlugin_CopyValidator",
  74                               new SketchPlugin_CopyValidator);
  75   aFactory->registerValidator("SketchPlugin_SolverErrorValidator",
  76                               new SketchPlugin_SolverErrorValidator);
  77   aFactory->registerValidator("SketchPlugin_FilletVertexValidator",
  78                               new SketchPlugin_FilletVertexValidator);
  79   aFactory->registerValidator("SketchPlugin_SplitValidator",
  80                               new SketchPlugin_SplitValidator);
  81   aFactory->registerValidator("SketchPlugin_TrimValidator",
  82                               new SketchPlugin_TrimValidator);
  83   aFactory->registerValidator("SketchPlugin_MiddlePointAttr",
  84                               new SketchPlugin_MiddlePointAttrValidator);
  85   aFactory->registerValidator("SketchPlugin_ArcTangentPoint",
  86                               new SketchPlugin_ArcTangentPointValidator);
  87   aFactory->registerValidator("SketchPlugin_IntersectionValidator",
  88                               new SketchPlugin_IntersectionValidator);
  89   aFactory->registerValidator("SketchPlugin_ProjectionValidator",
  90                               new SketchPlugin_ProjectionValidator);
  91
  92   // register this plugin
  93   ModelAPI_Session::get()->registerPlugin(this);
  94
  95   Config_PropManager::registerProp("Visualization", "sketch_entity_color",
  96                                    "Sketch entity color",
  97                                    Config_Prop::Color, SKETCH_ENTITY_COLOR);
  98
  99   Config_PropManager::registerProp("Visualization", "sketch_external_color",
 100                                    "Sketch external entity color",
 101                                    Config_Prop::Color, SKETCH_EXTERNAL_COLOR);
 102
 103   Config_PropManager::registerProp("Visualization", "sketch_auxiliary_color",
 104                                    "Sketch auxiliary entity color",
 105                                    Config_Prop::Color, SKETCH_AUXILIARY_COLOR);
 106
 107   Config_PropManager::registerProp("Visualization", "sketch_dimension_color",
 108                                    "Sketch dimension color",
 109                                    Config_Prop::Color, SKETCH_DIMENSION_COLOR);
 110
 111   Config_PropManager::registerProp("Visualization", "sketch_overconstraint_color",
 112                                    "Sketch overconstraint color",
 113                                    Config_Prop::Color, SKETCH_OVERCONSTRAINT_COLOR);
 114
 115   // register sketcher properties
 116 #ifdef SET_PLANES_COLOR_IN_PREFERENCES
 117   Config_PropManager::registerProp("Visualization", "yz_plane_color", "YZ plane color",
 118                                    Config_Prop::Color, YZ_PLANE_COLOR);
 119   Config_PropManager::registerProp("Visualization", "xz_plane_color", "XZ plane color",
 120                                    Config_Prop::Color, XZ_PLANE_COLOR);
 121   Config_PropManager::registerProp("Visualization", "xy_plane_color", "XY plane color",
 122                                    Config_Prop::Color, XY_PLANE_COLOR);
 123 #endif
 124 }
 125
 126 FeaturePtr SketchPlugin_Plugin::createFeature(std::string theFeatureID)
 127 {
 128   if (theFeatureID == SketchPlugin_Sketch::ID()) {
 129     return FeaturePtr(new SketchPlugin_Sketch);
 130   } else if (theFeatureID == SketchPlugin_Point::ID()) {
 131     return FeaturePtr(new SketchPlugin_Point);
 132   } else if (theFeatureID == SketchPlugin_IntersectionPoint::ID()) {
 133     return FeaturePtr(new SketchPlugin_IntersectionPoint);
 134   } else if (theFeatureID == SketchPlugin_Line::ID()) {
 135     return FeaturePtr(new SketchPlugin_Line);
 136   } else if (theFeatureID == SketchPlugin_Circle::ID()) {
 137     return FeaturePtr(new SketchPlugin_Circle);
 138   } else if (theFeatureID == SketchPlugin_Arc::ID()) {
 139     return FeaturePtr(new SketchPlugin_Arc);
 140   } else if (theFeatureID == SketchPlugin_Projection::ID()) {
 141     return FeaturePtr(new SketchPlugin_Projection);
 142   } else if (theFeatureID == SketchPlugin_ConstraintCoincidence::ID()) {
 143     return FeaturePtr(new SketchPlugin_ConstraintCoincidence);
 144   } else if (theFeatureID == SketchPlugin_ConstraintCollinear::ID()) {
 145     return FeaturePtr(new SketchPlugin_ConstraintCollinear);
 146   } else if (theFeatureID == SketchPlugin_ConstraintDistance::ID()) {
 147     return FeaturePtr(new SketchPlugin_ConstraintDistance);
 148   } else if (theFeatureID == SketchPlugin_ConstraintLength::ID()) {
 149     return FeaturePtr(new SketchPlugin_ConstraintLength);
 150   } else if (theFeatureID == SketchPlugin_ConstraintParallel::ID()) {
 151     return FeaturePtr(new SketchPlugin_ConstraintParallel);
 152   } else if (theFeatureID == SketchPlugin_ConstraintPerpendicular::ID()) {
 153     return FeaturePtr(new SketchPlugin_ConstraintPerpendicular);
 154   } else if (theFeatureID == SketchPlugin_ConstraintRadius::ID()) {
 155     return FeaturePtr(new SketchPlugin_ConstraintRadius);
 156   } else if (theFeatureID == SketchPlugin_ConstraintRigid::ID()) {
 157     return FeaturePtr(new SketchPlugin_ConstraintRigid);
 158   } else if (theFeatureID == SketchPlugin_ConstraintHorizontal::ID()) {
 159     return FeaturePtr(new SketchPlugin_ConstraintHorizontal);
 160   } else if (theFeatureID == SketchPlugin_ConstraintVertical::ID()) {
 161     return FeaturePtr(new SketchPlugin_ConstraintVertical);
 162   } else if (theFeatureID == SketchPlugin_ConstraintEqual::ID()) {
 163     return FeaturePtr(new SketchPlugin_ConstraintEqual);
 164   } else if (theFeatureID == SketchPlugin_ConstraintTangent::ID()) {
 165     return FeaturePtr(new SketchPlugin_ConstraintTangent);
 166   } else if (theFeatureID == SketchPlugin_ConstraintMiddle::ID()) {
 167     return FeaturePtr(new SketchPlugin_ConstraintMiddle);
 168   } else if (theFeatureID == SketchPlugin_ConstraintMirror::ID()) {
 169     return FeaturePtr(new SketchPlugin_ConstraintMirror);
 170   } else if (theFeatureID == SketchPlugin_Fillet::ID()) {
 171     return FeaturePtr(new SketchPlugin_Fillet);
 172   } else if (theFeatureID == SketchPlugin_ConstraintSplit::ID()) {
 173     return FeaturePtr(new SketchPlugin_ConstraintSplit);
 174   } else if (theFeatureID == SketchPlugin_MultiTranslation::ID()) {
 175     return FeaturePtr(new SketchPlugin_MultiTranslation);
 176   } else if (theFeatureID == SketchPlugin_MultiRotation::ID()) {
 177     return FeaturePtr(new SketchPlugin_MultiRotation);
 178   } else if (theFeatureID == SketchPlugin_ConstraintAngle::ID()) {
 179     return FeaturePtr(new SketchPlugin_ConstraintAngle);
 180   } else if (theFeatureID == SketchPlugin_Trim::ID()) {
 181     return FeaturePtr(new SketchPlugin_Trim);
 182   }
 183   // feature of such kind is not found
 184   return FeaturePtr();
 185 }
 186
 187 void SketchPlugin_Plugin::processEvent(const std::shared_ptr<Events_Message>& theMessage)
 188 {
 189   const Events_ID kRequestEvent =
 190       Events_Loop::loop()->eventByName(EVENT_FEATURE_STATE_REQUEST);
 191   if (theMessage->eventID() == kRequestEvent) {
 192     std::shared_ptr<ModelAPI_FeatureStateMessage> aStateMessage =
 193         std::dynamic_pointer_cast<ModelAPI_FeatureStateMessage>(theMessage);
 194     Events_Loop::loop()->send(getFeaturesState(aStateMessage->feature()), false);
 195   }
 196 }
 197
 198 std::shared_ptr<ModelAPI_FeatureStateMessage> SketchPlugin_Plugin
 199 ::getFeaturesState(const std::shared_ptr<ModelAPI_Feature>& theFeature) const
 200 {
 201   const Events_ID kResponseEvent = Events_Loop::loop()->eventByName(EVENT_FEATURE_STATE_RESPONSE);
 202   std::shared_ptr<ModelAPI_FeatureStateMessage> aMsg(
 203       new ModelAPI_FeatureStateMessage(kResponseEvent, this));
 204
 205   bool aHasSketchPlane = false;
 206   std::shared_ptr<SketchPlugin_Sketch> aSketchFeature =
 207       std::dynamic_pointer_cast<SketchPlugin_Sketch>(theFeature);
 208   if (aSketchFeature.get()) {
 209     std::shared_ptr<ModelAPI_Data> aData = aSketchFeature->data();
 210     if (aData) {
 211       std::shared_ptr<GeomDataAPI_Dir> aNormal =
 212         std::dynamic_pointer_cast<GeomDataAPI_Dir>(
 213         aData->attribute(SketchPlugin_Sketch::NORM_ID()));
 214       // it is important to check whether the normal attribute is initialized
 215       // because it is possible that normal values are filled when the plane is checked on validity
 216       aHasSketchPlane = aNormal && aNormal->isInitialized() &&
 217                         !(aNormal->x() == 0 && aNormal->y() == 0 && aNormal->z() == 0);
 218
 219       aMsg->setState(SketchPlugin_Point::ID(), aHasSketchPlane);
 220       aMsg->setState(SketchPlugin_IntersectionPoint::ID(), aHasSketchPlane);
 221       aMsg->setState(SketchPlugin_Line::ID(), aHasSketchPlane);
 222       aMsg->setState(SketchPlugin_Circle::ID(), aHasSketchPlane);
 223       aMsg->setState(SketchPlugin_Arc::ID(), aHasSketchPlane);
 224       aMsg->setState(SketchPlugin_Projection::ID(), aHasSketchPlane);
 225       aMsg->setState(SketchPlugin_ConstraintCoincidence::ID(), aHasSketchPlane);
 226       aMsg->setState(SketchPlugin_ConstraintCollinear::ID(), aHasSketchPlane);
 227       aMsg->setState(SketchPlugin_ConstraintDistance::ID(), aHasSketchPlane);
 228       aMsg->setState(SketchPlugin_ConstraintLength::ID(), aHasSketchPlane);
 229       aMsg->setState(SketchPlugin_ConstraintParallel::ID(), aHasSketchPlane);
 230       aMsg->setState(SketchPlugin_ConstraintPerpendicular::ID(), aHasSketchPlane);
 231       aMsg->setState(SketchPlugin_ConstraintRadius::ID(), aHasSketchPlane);
 232       aMsg->setState(SketchPlugin_ConstraintRigid::ID(), aHasSketchPlane);
 233       aMsg->setState(SketchPlugin_ConstraintHorizontal::ID(), aHasSketchPlane);
 234       aMsg->setState(SketchPlugin_ConstraintVertical::ID(), aHasSketchPlane);
 235       aMsg->setState(SketchPlugin_ConstraintEqual::ID(), aHasSketchPlane);
 236       aMsg->setState(SketchPlugin_ConstraintTangent::ID(), aHasSketchPlane);
 237       aMsg->setState(SketchPlugin_ConstraintMiddle::ID(), aHasSketchPlane);
 238       aMsg->setState(SketchPlugin_ConstraintMirror::ID(), aHasSketchPlane);
 239       aMsg->setState(SketchPlugin_Fillet::ID(), aHasSketchPlane);
 240       aMsg->setState(SketchPlugin_ConstraintSplit::ID(), aHasSketchPlane);
 241       aMsg->setState(SketchPlugin_ConstraintAngle::ID(), aHasSketchPlane);
 242       aMsg->setState(SketchPlugin_MultiRotation::ID(), aHasSketchPlane);
 243       aMsg->setState(SketchPlugin_MultiTranslation::ID(), aHasSketchPlane);
 244       aMsg->setState(SketchPlugin_Trim::ID(), aHasSketchPlane);
 245       // SketchRectangle is a python feature, so its ID is passed just as a string
 246       aMsg->setState("SketchRectangle", aHasSketchPlane);
 247     }
 248   }
 249   return aMsg;
 250 }