1 // Copyright (C) 2014-20xx CEA/DEN, EDF R&D -->
3 #include <SketchPlugin_Plugin.h>
4 #include <SketchPlugin_Sketch.h>
5 #include <SketchPlugin_Line.h>
6 #include <SketchPlugin_Point.h>
7 #include <SketchPlugin_IntersectionPoint.h>
8 #include <SketchPlugin_Circle.h>
9 #include <SketchPlugin_Arc.h>
10 #include <SketchPlugin_Projection.h>
11 #include <SketchPlugin_ConstraintAngle.h>
12 #include <SketchPlugin_ConstraintCoincidence.h>
13 #include <SketchPlugin_ConstraintCollinear.h>
14 #include <SketchPlugin_ConstraintDistance.h>
15 #include <SketchPlugin_ConstraintEqual.h>
16 #include <SketchPlugin_Fillet.h>
17 #include <SketchPlugin_ConstraintSplit.h>
18 #include <SketchPlugin_ConstraintHorizontal.h>
19 #include <SketchPlugin_ConstraintLength.h>
20 #include <SketchPlugin_ConstraintMiddle.h>
21 #include <SketchPlugin_ConstraintMirror.h>
22 #include <SketchPlugin_ConstraintParallel.h>
23 #include <SketchPlugin_ConstraintPerpendicular.h>
24 #include <SketchPlugin_ConstraintRadius.h>
25 #include <SketchPlugin_ConstraintRigid.h>
26 #include <SketchPlugin_ConstraintTangent.h>
27 #include <SketchPlugin_ConstraintVertical.h>
28 #include <SketchPlugin_MacroArc.h>
29 #include <SketchPlugin_MacroCircle.h>
30 #include <SketchPlugin_MultiRotation.h>
31 #include <SketchPlugin_MultiTranslation.h>
32 #include <SketchPlugin_Trim.h>
33 #include <SketchPlugin_Validators.h>
34 #include <SketchPlugin_ExternalValidator.h>
36 #include <Events_Loop.h>
37 #include <GeomDataAPI_Dir.h>
39 #include <ModelAPI_Session.h>
40 #include <ModelAPI_Document.h>
41 #include <ModelAPI_Validator.h>
42 #include <ModelAPI_Data.h>
44 #include <Config_PropManager.h>
52 #define SKETCH_ENTITY_COLOR "225,0,0"
53 #define SKETCH_EXTERNAL_COLOR "170,0,225"
54 #define SKETCH_AUXILIARY_COLOR "0,85,0"
55 #define SKETCH_OVERCONSTRAINT_COLOR "0,0,0"
56 #define SKETCH_FULLY_CONSTRAINED_COLOR "0,150,0"
58 //#define SET_PLANES_COLOR_IN_PREFERENCES
60 // the only created instance of this plugin
61 static SketchPlugin_Plugin* MY_SKETCH_INSTANCE = new SketchPlugin_Plugin();
63 SketchPlugin_Plugin::SketchPlugin_Plugin()
65 SessionPtr aMgr = ModelAPI_Session::get();
66 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
67 aFactory->registerValidator("SketchPlugin_DistanceAttr",
68 new SketchPlugin_DistanceAttrValidator);
69 aFactory->registerValidator("SketchPlugin_ExternalValidator",
70 new SketchPlugin_ExternalValidator);
71 aFactory->registerValidator("SketchPlugin_TangentAttr",
72 new SketchPlugin_TangentAttrValidator);
73 aFactory->registerValidator("SketchPlugin_NotFixed",
74 new SketchPlugin_NotFixedValidator);
75 aFactory->registerValidator("SketchPlugin_EqualAttr",
76 new SketchPlugin_EqualAttrValidator);
77 aFactory->registerValidator("SketchPlugin_MirrorAttr",
78 new SketchPlugin_MirrorAttrValidator);
79 aFactory->registerValidator("SketchPlugin_CoincidenceAttr",
80 new SketchPlugin_CoincidenceAttrValidator);
81 aFactory->registerValidator("SketchPlugin_CopyValidator",
82 new SketchPlugin_CopyValidator);
83 aFactory->registerValidator("SketchPlugin_SolverErrorValidator",
84 new SketchPlugin_SolverErrorValidator);
85 aFactory->registerValidator("SketchPlugin_FilletVertexValidator",
86 new SketchPlugin_FilletVertexValidator);
87 aFactory->registerValidator("SketchPlugin_SplitValidator",
88 new SketchPlugin_SplitValidator);
89 aFactory->registerValidator("SketchPlugin_TrimValidator",
90 new SketchPlugin_TrimValidator);
91 aFactory->registerValidator("SketchPlugin_MiddlePointAttr",
92 new SketchPlugin_MiddlePointAttrValidator);
93 aFactory->registerValidator("SketchPlugin_ArcTangentPoint",
94 new SketchPlugin_ArcTangentPointValidator);
95 aFactory->registerValidator("SketchPlugin_IntersectionValidator",
96 new SketchPlugin_IntersectionValidator);
97 aFactory->registerValidator("SketchPlugin_ProjectionValidator",
98 new SketchPlugin_ProjectionValidator);
99 aFactory->registerValidator("SketchPlugin_DifferentReference",
100 new SketchPlugin_DifferentReferenceValidator);
101 aFactory->registerValidator("SketchPlugin_CirclePassedPointValidator",
102 new SketchPlugin_CirclePassedPointValidator);
103 aFactory->registerValidator("SketchPlugin_ThirdPointValidator",
104 new SketchPlugin_ThirdPointValidator);
105 aFactory->registerValidator("SketchPlugin_ArcEndPointValidator",
106 new SketchPlugin_ArcEndPointValidator);
107 aFactory->registerValidator("SketchPlugin_ArcEndPointIntersectionValidator",
108 new SketchPlugin_ArcEndPointIntersectionValidator);
110 // register this plugin
111 ModelAPI_Session::get()->registerPlugin(this);
113 Config_PropManager::registerProp("Visualization", "sketch_entity_color",
114 "Sketch entity color",
115 Config_Prop::Color, SKETCH_ENTITY_COLOR);
117 Config_PropManager::registerProp("Visualization", "sketch_external_color",
118 "Sketch external entity color",
119 Config_Prop::Color, SKETCH_EXTERNAL_COLOR);
121 Config_PropManager::registerProp("Visualization", "sketch_auxiliary_color",
122 "Sketch auxiliary entity color",
123 Config_Prop::Color, SKETCH_AUXILIARY_COLOR);
125 Config_PropManager::registerProp("Visualization", "sketch_dimension_color",
126 "Sketch dimension color",
127 Config_Prop::Color, SKETCH_DIMENSION_COLOR);
129 Config_PropManager::registerProp("Visualization", "sketch_overconstraint_color",
130 "Sketch overconstraint color",
131 Config_Prop::Color, SKETCH_OVERCONSTRAINT_COLOR);
133 Config_PropManager::registerProp("Visualization", "sketch_fully_constrained_color",
134 "Sketch fully constrained color",
135 Config_Prop::Color, SKETCH_FULLY_CONSTRAINED_COLOR);
137 // register sketcher properties
138 #ifdef SET_PLANES_COLOR_IN_PREFERENCES
139 Config_PropManager::registerProp("Visualization", "yz_plane_color", "YZ plane color",
140 Config_Prop::Color, YZ_PLANE_COLOR);
141 Config_PropManager::registerProp("Visualization", "xz_plane_color", "XZ plane color",
142 Config_Prop::Color, XZ_PLANE_COLOR);
143 Config_PropManager::registerProp("Visualization", "xy_plane_color", "XY plane color",
144 Config_Prop::Color, XY_PLANE_COLOR);
148 FeaturePtr SketchPlugin_Plugin::createFeature(std::string theFeatureID)
150 if (theFeatureID == SketchPlugin_Sketch::ID()) {
151 return FeaturePtr(new SketchPlugin_Sketch);
152 } else if (theFeatureID == SketchPlugin_Point::ID()) {
153 return FeaturePtr(new SketchPlugin_Point);
154 } else if (theFeatureID == SketchPlugin_IntersectionPoint::ID()) {
155 return FeaturePtr(new SketchPlugin_IntersectionPoint);
156 } else if (theFeatureID == SketchPlugin_Line::ID()) {
157 return FeaturePtr(new SketchPlugin_Line);
158 } else if (theFeatureID == SketchPlugin_Circle::ID()) {
159 return FeaturePtr(new SketchPlugin_Circle);
160 } else if (theFeatureID == SketchPlugin_Arc::ID()) {
161 return FeaturePtr(new SketchPlugin_Arc);
162 } else if (theFeatureID == SketchPlugin_Projection::ID()) {
163 return FeaturePtr(new SketchPlugin_Projection);
164 } else if (theFeatureID == SketchPlugin_ConstraintCoincidence::ID()) {
165 return FeaturePtr(new SketchPlugin_ConstraintCoincidence);
166 } else if (theFeatureID == SketchPlugin_ConstraintCollinear::ID()) {
167 return FeaturePtr(new SketchPlugin_ConstraintCollinear);
168 } else if (theFeatureID == SketchPlugin_ConstraintDistance::ID()) {
169 return FeaturePtr(new SketchPlugin_ConstraintDistance);
170 } else if (theFeatureID == SketchPlugin_ConstraintLength::ID()) {
171 return FeaturePtr(new SketchPlugin_ConstraintLength);
172 } else if (theFeatureID == SketchPlugin_ConstraintParallel::ID()) {
173 return FeaturePtr(new SketchPlugin_ConstraintParallel);
174 } else if (theFeatureID == SketchPlugin_ConstraintPerpendicular::ID()) {
175 return FeaturePtr(new SketchPlugin_ConstraintPerpendicular);
176 } else if (theFeatureID == SketchPlugin_ConstraintRadius::ID()) {
177 return FeaturePtr(new SketchPlugin_ConstraintRadius);
178 } else if (theFeatureID == SketchPlugin_ConstraintRigid::ID()) {
179 return FeaturePtr(new SketchPlugin_ConstraintRigid);
180 } else if (theFeatureID == SketchPlugin_ConstraintHorizontal::ID()) {
181 return FeaturePtr(new SketchPlugin_ConstraintHorizontal);
182 } else if (theFeatureID == SketchPlugin_ConstraintVertical::ID()) {
183 return FeaturePtr(new SketchPlugin_ConstraintVertical);
184 } else if (theFeatureID == SketchPlugin_ConstraintEqual::ID()) {
185 return FeaturePtr(new SketchPlugin_ConstraintEqual);
186 } else if (theFeatureID == SketchPlugin_ConstraintTangent::ID()) {
187 return FeaturePtr(new SketchPlugin_ConstraintTangent);
188 } else if (theFeatureID == SketchPlugin_ConstraintMiddle::ID()) {
189 return FeaturePtr(new SketchPlugin_ConstraintMiddle);
190 } else if (theFeatureID == SketchPlugin_ConstraintMirror::ID()) {
191 return FeaturePtr(new SketchPlugin_ConstraintMirror);
192 } else if (theFeatureID == SketchPlugin_Fillet::ID()) {
193 return FeaturePtr(new SketchPlugin_Fillet);
194 } else if (theFeatureID == SketchPlugin_ConstraintSplit::ID()) {
195 return FeaturePtr(new SketchPlugin_ConstraintSplit);
196 } else if (theFeatureID == SketchPlugin_MultiTranslation::ID()) {
197 return FeaturePtr(new SketchPlugin_MultiTranslation);
198 } else if (theFeatureID == SketchPlugin_MultiRotation::ID()) {
199 return FeaturePtr(new SketchPlugin_MultiRotation);
200 } else if (theFeatureID == SketchPlugin_ConstraintAngle::ID()) {
201 return FeaturePtr(new SketchPlugin_ConstraintAngle);
202 } else if (theFeatureID == SketchPlugin_Trim::ID()) {
203 return FeaturePtr(new SketchPlugin_Trim);
204 } else if (theFeatureID == SketchPlugin_MacroArc::ID()) {
205 return FeaturePtr(new SketchPlugin_MacroArc);
206 } else if (theFeatureID == SketchPlugin_MacroCircle::ID()) {
207 return FeaturePtr(new SketchPlugin_MacroCircle);
209 // feature of such kind is not found
213 void SketchPlugin_Plugin::processEvent(const std::shared_ptr<Events_Message>& theMessage)
215 const Events_ID kRequestEvent =
216 Events_Loop::loop()->eventByName(EVENT_FEATURE_STATE_REQUEST);
217 if (theMessage->eventID() == kRequestEvent) {
218 std::shared_ptr<ModelAPI_FeatureStateMessage> aStateMessage =
219 std::dynamic_pointer_cast<ModelAPI_FeatureStateMessage>(theMessage);
220 Events_Loop::loop()->send(getFeaturesState(aStateMessage->feature()), false);
224 std::shared_ptr<ModelAPI_FeatureStateMessage> SketchPlugin_Plugin
225 ::getFeaturesState(const std::shared_ptr<ModelAPI_Feature>& theFeature) const
227 const Events_ID kResponseEvent = Events_Loop::loop()->eventByName(EVENT_FEATURE_STATE_RESPONSE);
228 std::shared_ptr<ModelAPI_FeatureStateMessage> aMsg(
229 new ModelAPI_FeatureStateMessage(kResponseEvent, this));
231 bool aHasSketchPlane = false;
232 std::shared_ptr<SketchPlugin_Sketch> aSketchFeature =
233 std::dynamic_pointer_cast<SketchPlugin_Sketch>(theFeature);
234 if (aSketchFeature.get()) {
235 std::shared_ptr<ModelAPI_Data> aData = aSketchFeature->data();
237 std::shared_ptr<GeomDataAPI_Dir> aNormal =
238 std::dynamic_pointer_cast<GeomDataAPI_Dir>(
239 aData->attribute(SketchPlugin_Sketch::NORM_ID()));
240 // it is important to check whether the normal attribute is initialized
241 // because it is possible that normal values are filled when the plane is checked on validity
242 aHasSketchPlane = aNormal && aNormal->isInitialized() &&
243 !(aNormal->x() == 0 && aNormal->y() == 0 && aNormal->z() == 0);
245 aMsg->setState(SketchPlugin_Point::ID(), aHasSketchPlane);
246 aMsg->setState(SketchPlugin_IntersectionPoint::ID(), aHasSketchPlane);
247 aMsg->setState(SketchPlugin_Line::ID(), aHasSketchPlane);
248 aMsg->setState(SketchPlugin_Circle::ID(), aHasSketchPlane);
249 aMsg->setState(SketchPlugin_Arc::ID(), aHasSketchPlane);
250 aMsg->setState(SketchPlugin_Projection::ID(), aHasSketchPlane);
251 aMsg->setState(SketchPlugin_ConstraintCoincidence::ID(), aHasSketchPlane);
252 aMsg->setState(SketchPlugin_ConstraintCollinear::ID(), aHasSketchPlane);
253 aMsg->setState(SketchPlugin_ConstraintDistance::ID(), aHasSketchPlane);
254 aMsg->setState(SketchPlugin_ConstraintLength::ID(), aHasSketchPlane);
255 aMsg->setState(SketchPlugin_ConstraintParallel::ID(), aHasSketchPlane);
256 aMsg->setState(SketchPlugin_ConstraintPerpendicular::ID(), aHasSketchPlane);
257 aMsg->setState(SketchPlugin_ConstraintRadius::ID(), aHasSketchPlane);
258 aMsg->setState(SketchPlugin_ConstraintRigid::ID(), aHasSketchPlane);
259 aMsg->setState(SketchPlugin_ConstraintHorizontal::ID(), aHasSketchPlane);
260 aMsg->setState(SketchPlugin_ConstraintVertical::ID(), aHasSketchPlane);
261 aMsg->setState(SketchPlugin_ConstraintEqual::ID(), aHasSketchPlane);
262 aMsg->setState(SketchPlugin_ConstraintTangent::ID(), aHasSketchPlane);
263 aMsg->setState(SketchPlugin_ConstraintMiddle::ID(), aHasSketchPlane);
264 aMsg->setState(SketchPlugin_ConstraintMirror::ID(), aHasSketchPlane);
265 aMsg->setState(SketchPlugin_Fillet::ID(), aHasSketchPlane);
266 aMsg->setState(SketchPlugin_ConstraintSplit::ID(), aHasSketchPlane);
267 aMsg->setState(SketchPlugin_ConstraintAngle::ID(), aHasSketchPlane);
268 aMsg->setState(SketchPlugin_MultiRotation::ID(), aHasSketchPlane);
269 aMsg->setState(SketchPlugin_MultiTranslation::ID(), aHasSketchPlane);
270 aMsg->setState(SketchPlugin_Trim::ID(), aHasSketchPlane);
271 aMsg->setState(SketchPlugin_MacroArc::ID(), aHasSketchPlane);
272 aMsg->setState(SketchPlugin_MacroCircle::ID(), aHasSketchPlane);
273 // SketchRectangle is a python feature, so its ID is passed just as a string
274 aMsg->setState("SketchRectangle", aHasSketchPlane);