1 // Copyright (C) 2014-2017 CEA/DEN, EDF R&D
3 // This library is free software; you can redistribute it and/or
4 // modify it under the terms of the GNU Lesser General Public
5 // License as published by the Free Software Foundation; either
6 // version 2.1 of the License, or (at your option) any later version.
8 // This library is distributed in the hope that it will be useful,
9 // but WITHOUT ANY WARRANTY; without even the implied warranty of
10 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 // Lesser General Public License for more details.
13 // You should have received a copy of the GNU Lesser General Public
14 // License along with this library; if not, write to the Free Software
15 // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 // See http://www.salome-platform.org/ or
18 // email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
21 #include <SketchPlugin_Plugin.h>
22 #include <SketchPlugin_Sketch.h>
23 #include <SketchPlugin_Line.h>
24 #include <SketchPlugin_Point.h>
25 #include <SketchPlugin_IntersectionPoint.h>
26 #include <SketchPlugin_Circle.h>
27 #include <SketchPlugin_Arc.h>
28 #include <SketchPlugin_Projection.h>
29 #include <SketchPlugin_ConstraintAngle.h>
30 #include <SketchPlugin_ConstraintCoincidence.h>
31 #include <SketchPlugin_ConstraintCollinear.h>
32 #include <SketchPlugin_ConstraintDistance.h>
33 #include <SketchPlugin_ConstraintDistanceHorizontal.h>
34 #include <SketchPlugin_ConstraintDistanceVertical.h>
35 #include <SketchPlugin_ConstraintEqual.h>
36 #include <SketchPlugin_Fillet.h>
37 #include <SketchPlugin_ConstraintHorizontal.h>
38 #include <SketchPlugin_ConstraintLength.h>
39 #include <SketchPlugin_ConstraintMiddle.h>
40 #include <SketchPlugin_ConstraintMirror.h>
41 #include <SketchPlugin_ConstraintParallel.h>
42 #include <SketchPlugin_ConstraintPerpendicular.h>
43 #include <SketchPlugin_ConstraintRadius.h>
44 #include <SketchPlugin_ConstraintRigid.h>
45 #include <SketchPlugin_ConstraintTangent.h>
46 #include <SketchPlugin_ConstraintVertical.h>
47 #include <SketchPlugin_MacroArc.h>
48 #include <SketchPlugin_MacroCircle.h>
49 #include <SketchPlugin_MultiRotation.h>
50 #include <SketchPlugin_MultiTranslation.h>
51 #include <SketchPlugin_Trim.h>
52 #include <SketchPlugin_Split.h>
53 #include <SketchPlugin_Validators.h>
54 #include <SketchPlugin_ExternalValidator.h>
55 #include <SketchPlugin_Ellipse.h>
56 #include <SketchPlugin_MacroEllipse.h>
58 #include <Events_Loop.h>
59 #include <GeomDataAPI_Dir.h>
61 #include <ModelAPI_Session.h>
62 #include <ModelAPI_Document.h>
63 #include <ModelAPI_Validator.h>
64 #include <ModelAPI_Data.h>
66 #include <Config_PropManager.h>
74 #define SKETCH_ENTITY_COLOR "225,0,0"
75 #define SKETCH_EXTERNAL_COLOR "170,0,225"
76 #define SKETCH_AUXILIARY_COLOR "0,85,0"
77 #define SKETCH_OVERCONSTRAINT_COLOR "0,0,0"
78 #define SKETCH_FULLY_CONSTRAINED_COLOR "0,150,0"
80 //#define SET_PLANES_COLOR_IN_PREFERENCES
82 // the only created instance of this plugin
83 static SketchPlugin_Plugin* MY_SKETCH_INSTANCE = new SketchPlugin_Plugin();
85 SketchPlugin_Plugin::SketchPlugin_Plugin()
87 SessionPtr aMgr = ModelAPI_Session::get();
88 ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
89 aFactory->registerValidator("SketchPlugin_DistanceAttr",
90 new SketchPlugin_DistanceAttrValidator);
91 aFactory->registerValidator("SketchPlugin_ExternalValidator",
92 new SketchPlugin_ExternalValidator);
93 aFactory->registerValidator("SketchPlugin_TangentAttr",
94 new SketchPlugin_TangentAttrValidator);
95 aFactory->registerValidator("SketchPlugin_NotFixed",
96 new SketchPlugin_NotFixedValidator);
97 aFactory->registerValidator("SketchPlugin_EqualAttr",
98 new SketchPlugin_EqualAttrValidator);
99 aFactory->registerValidator("SketchPlugin_MirrorAttr",
100 new SketchPlugin_MirrorAttrValidator);
101 aFactory->registerValidator("SketchPlugin_CoincidenceAttr",
102 new SketchPlugin_CoincidenceAttrValidator);
103 aFactory->registerValidator("SketchPlugin_CopyValidator",
104 new SketchPlugin_CopyValidator);
105 aFactory->registerValidator("SketchPlugin_SolverErrorValidator",
106 new SketchPlugin_SolverErrorValidator);
107 aFactory->registerValidator("SketchPlugin_FilletVertexValidator",
108 new SketchPlugin_FilletVertexValidator);
109 aFactory->registerValidator("SketchPlugin_SplitValidator",
110 new SketchPlugin_SplitValidator);
111 aFactory->registerValidator("SketchPlugin_TrimValidator",
112 new SketchPlugin_TrimValidator);
113 aFactory->registerValidator("SketchPlugin_MiddlePointAttr",
114 new SketchPlugin_MiddlePointAttrValidator);
115 aFactory->registerValidator("SketchPlugin_ArcTangentPoint",
116 new SketchPlugin_ArcTangentPointValidator);
117 aFactory->registerValidator("SketchPlugin_IntersectionValidator",
118 new SketchPlugin_IntersectionValidator);
119 aFactory->registerValidator("SketchPlugin_ProjectionValidator",
120 new SketchPlugin_ProjectionValidator);
121 aFactory->registerValidator("SketchPlugin_DifferentReference",
122 new SketchPlugin_DifferentReferenceValidator);
123 aFactory->registerValidator("SketchPlugin_DifferentPointReference",
124 new SketchPlugin_DifferentPointReferenceValidator);
125 aFactory->registerValidator("SketchPlugin_CirclePassedPointValidator",
126 new SketchPlugin_CirclePassedPointValidator);
127 aFactory->registerValidator("SketchPlugin_ThirdPointValidator",
128 new SketchPlugin_ThirdPointValidator);
129 aFactory->registerValidator("SketchPlugin_ArcEndPointValidator",
130 new SketchPlugin_ArcEndPointValidator);
131 aFactory->registerValidator("SketchPlugin_ArcEndPointIntersectionValidator",
132 new SketchPlugin_ArcEndPointIntersectionValidator);
133 aFactory->registerValidator("SketchPlugin_HasNoConstraint", new SketchPlugin_HasNoConstraint);
135 // register this plugin
136 ModelAPI_Session::get()->registerPlugin(this);
138 Config_PropManager::registerProp("Visualization", "sketch_entity_color",
139 "Sketch entity color",
140 Config_Prop::Color, SKETCH_ENTITY_COLOR);
142 Config_PropManager::registerProp("Visualization", "sketch_external_color",
143 "Sketch external entity color",
144 Config_Prop::Color, SKETCH_EXTERNAL_COLOR);
146 Config_PropManager::registerProp("Visualization", "sketch_auxiliary_color",
147 "Sketch auxiliary entity color",
148 Config_Prop::Color, SKETCH_AUXILIARY_COLOR);
150 Config_PropManager::registerProp("Visualization", "sketch_dimension_color",
151 "Sketch dimension color",
152 Config_Prop::Color, SKETCH_DIMENSION_COLOR);
154 Config_PropManager::registerProp("Visualization", "sketch_overconstraint_color",
155 "Sketch overconstraint color",
156 Config_Prop::Color, SKETCH_OVERCONSTRAINT_COLOR);
158 Config_PropManager::registerProp("Visualization", "sketch_fully_constrained_color",
159 "Sketch fully constrained color",
160 Config_Prop::Color, SKETCH_FULLY_CONSTRAINED_COLOR);
162 // register sketcher properties
163 #ifdef SET_PLANES_COLOR_IN_PREFERENCES
164 Config_PropManager::registerProp("Visualization", "yz_plane_color", "YZ plane color",
165 Config_Prop::Color, YZ_PLANE_COLOR);
166 Config_PropManager::registerProp("Visualization", "xz_plane_color", "XZ plane color",
167 Config_Prop::Color, XZ_PLANE_COLOR);
168 Config_PropManager::registerProp("Visualization", "xy_plane_color", "XY plane color",
169 Config_Prop::Color, XY_PLANE_COLOR);
173 FeaturePtr SketchPlugin_Plugin::createFeature(std::string theFeatureID)
175 if (theFeatureID == SketchPlugin_Sketch::ID()) {
176 return FeaturePtr(new SketchPlugin_Sketch);
177 } else if (theFeatureID == SketchPlugin_Point::ID()) {
178 return FeaturePtr(new SketchPlugin_Point);
179 } else if (theFeatureID == SketchPlugin_IntersectionPoint::ID()) {
180 return FeaturePtr(new SketchPlugin_IntersectionPoint);
181 } else if (theFeatureID == SketchPlugin_Line::ID()) {
182 return FeaturePtr(new SketchPlugin_Line);
183 } else if (theFeatureID == SketchPlugin_Circle::ID()) {
184 return FeaturePtr(new SketchPlugin_Circle);
185 } else if (theFeatureID == SketchPlugin_Arc::ID()) {
186 return FeaturePtr(new SketchPlugin_Arc);
187 } else if (theFeatureID == SketchPlugin_Projection::ID()) {
188 return FeaturePtr(new SketchPlugin_Projection);
189 } else if (theFeatureID == SketchPlugin_ConstraintCoincidence::ID()) {
190 return FeaturePtr(new SketchPlugin_ConstraintCoincidence);
191 } else if (theFeatureID == SketchPlugin_ConstraintCollinear::ID()) {
192 return FeaturePtr(new SketchPlugin_ConstraintCollinear);
193 } else if (theFeatureID == SketchPlugin_ConstraintDistance::ID()) {
194 return FeaturePtr(new SketchPlugin_ConstraintDistance);
195 } else if (theFeatureID == SketchPlugin_ConstraintDistanceHorizontal::ID()) {
196 return FeaturePtr(new SketchPlugin_ConstraintDistanceHorizontal);
197 } else if (theFeatureID == SketchPlugin_ConstraintDistanceVertical::ID()) {
198 return FeaturePtr(new SketchPlugin_ConstraintDistanceVertical);
199 } else if (theFeatureID == SketchPlugin_ConstraintLength::ID()) {
200 return FeaturePtr(new SketchPlugin_ConstraintLength);
201 } else if (theFeatureID == SketchPlugin_ConstraintParallel::ID()) {
202 return FeaturePtr(new SketchPlugin_ConstraintParallel);
203 } else if (theFeatureID == SketchPlugin_ConstraintPerpendicular::ID()) {
204 return FeaturePtr(new SketchPlugin_ConstraintPerpendicular);
205 } else if (theFeatureID == SketchPlugin_ConstraintRadius::ID()) {
206 return FeaturePtr(new SketchPlugin_ConstraintRadius);
207 } else if (theFeatureID == SketchPlugin_ConstraintRigid::ID()) {
208 return FeaturePtr(new SketchPlugin_ConstraintRigid);
209 } else if (theFeatureID == SketchPlugin_ConstraintHorizontal::ID()) {
210 return FeaturePtr(new SketchPlugin_ConstraintHorizontal);
211 } else if (theFeatureID == SketchPlugin_ConstraintVertical::ID()) {
212 return FeaturePtr(new SketchPlugin_ConstraintVertical);
213 } else if (theFeatureID == SketchPlugin_ConstraintEqual::ID()) {
214 return FeaturePtr(new SketchPlugin_ConstraintEqual);
215 } else if (theFeatureID == SketchPlugin_ConstraintTangent::ID()) {
216 return FeaturePtr(new SketchPlugin_ConstraintTangent);
217 } else if (theFeatureID == SketchPlugin_ConstraintMiddle::ID()) {
218 return FeaturePtr(new SketchPlugin_ConstraintMiddle);
219 } else if (theFeatureID == SketchPlugin_ConstraintMirror::ID()) {
220 return FeaturePtr(new SketchPlugin_ConstraintMirror);
221 } else if (theFeatureID == SketchPlugin_Fillet::ID()) {
222 return FeaturePtr(new SketchPlugin_Fillet);
223 } else if (theFeatureID == SketchPlugin_MultiTranslation::ID()) {
224 return FeaturePtr(new SketchPlugin_MultiTranslation);
225 } else if (theFeatureID == SketchPlugin_MultiRotation::ID()) {
226 return FeaturePtr(new SketchPlugin_MultiRotation);
227 } else if (theFeatureID == SketchPlugin_ConstraintAngle::ID()) {
228 return FeaturePtr(new SketchPlugin_ConstraintAngle);
229 } else if (theFeatureID == SketchPlugin_Split::ID()) {
230 return FeaturePtr(new SketchPlugin_Split);
231 } else if (theFeatureID == SketchPlugin_Trim::ID()) {
232 return FeaturePtr(new SketchPlugin_Trim);
233 } else if (theFeatureID == SketchPlugin_MacroArc::ID()) {
234 return FeaturePtr(new SketchPlugin_MacroArc);
235 } else if (theFeatureID == SketchPlugin_MacroCircle::ID()) {
236 return FeaturePtr(new SketchPlugin_MacroCircle);
237 } else if (theFeatureID == SketchPlugin_Ellipse::ID()) {
238 return FeaturePtr(new SketchPlugin_Ellipse);
239 } else if (theFeatureID == SketchPlugin_MacroEllipse::ID()) {
240 return FeaturePtr(new SketchPlugin_MacroEllipse);
242 // feature of such kind is not found
246 void SketchPlugin_Plugin::processEvent(const std::shared_ptr<Events_Message>& theMessage)
248 const Events_ID kRequestEvent =
249 Events_Loop::loop()->eventByName(EVENT_FEATURE_STATE_REQUEST);
250 if (theMessage->eventID() == kRequestEvent) {
251 std::shared_ptr<ModelAPI_FeatureStateMessage> aStateMessage =
252 std::dynamic_pointer_cast<ModelAPI_FeatureStateMessage>(theMessage);
253 Events_Loop::loop()->send(getFeaturesState(aStateMessage->feature()), false);
257 std::shared_ptr<ModelAPI_FeatureStateMessage> SketchPlugin_Plugin
258 ::getFeaturesState(const std::shared_ptr<ModelAPI_Feature>& theFeature) const
260 const Events_ID kResponseEvent = Events_Loop::loop()->eventByName(EVENT_FEATURE_STATE_RESPONSE);
261 std::shared_ptr<ModelAPI_FeatureStateMessage> aMsg(
262 new ModelAPI_FeatureStateMessage(kResponseEvent, this));
264 bool aHasSketchPlane = false;
265 std::shared_ptr<SketchPlugin_Sketch> aSketchFeature =
266 std::dynamic_pointer_cast<SketchPlugin_Sketch>(theFeature);
267 if (aSketchFeature.get()) {
268 std::shared_ptr<ModelAPI_Data> aData = aSketchFeature->data();
270 std::shared_ptr<GeomDataAPI_Dir> aNormal =
271 std::dynamic_pointer_cast<GeomDataAPI_Dir>(
272 aData->attribute(SketchPlugin_Sketch::NORM_ID()));
273 // it is important to check whether the normal attribute is initialized
274 // because it is possible that normal values are filled when the plane is checked on validity
275 aHasSketchPlane = aNormal && aNormal->isInitialized() &&
276 !(aNormal->x() == 0 && aNormal->y() == 0 && aNormal->z() == 0);
278 aMsg->setState(SketchPlugin_Point::ID(), aHasSketchPlane);
279 aMsg->setState(SketchPlugin_IntersectionPoint::ID(), aHasSketchPlane);
280 aMsg->setState(SketchPlugin_Line::ID(), aHasSketchPlane);
281 aMsg->setState(SketchPlugin_Circle::ID(), aHasSketchPlane);
282 aMsg->setState(SketchPlugin_Arc::ID(), aHasSketchPlane);
283 aMsg->setState(SketchPlugin_Ellipse::ID(), aHasSketchPlane);
284 aMsg->setState(SketchPlugin_Projection::ID(), aHasSketchPlane);
285 aMsg->setState(SketchPlugin_ConstraintCoincidence::ID(), aHasSketchPlane);
286 aMsg->setState(SketchPlugin_ConstraintCollinear::ID(), aHasSketchPlane);
287 aMsg->setState(SketchPlugin_ConstraintDistance::ID(), aHasSketchPlane);
288 aMsg->setState(SketchPlugin_ConstraintLength::ID(), aHasSketchPlane);
289 aMsg->setState(SketchPlugin_ConstraintParallel::ID(), aHasSketchPlane);
290 aMsg->setState(SketchPlugin_ConstraintPerpendicular::ID(), aHasSketchPlane);
291 aMsg->setState(SketchPlugin_ConstraintRadius::ID(), aHasSketchPlane);
292 aMsg->setState(SketchPlugin_ConstraintRigid::ID(), aHasSketchPlane);
293 aMsg->setState(SketchPlugin_ConstraintHorizontal::ID(), aHasSketchPlane);
294 aMsg->setState(SketchPlugin_ConstraintVertical::ID(), aHasSketchPlane);
295 aMsg->setState(SketchPlugin_ConstraintEqual::ID(), aHasSketchPlane);
296 aMsg->setState(SketchPlugin_ConstraintTangent::ID(), aHasSketchPlane);
297 aMsg->setState(SketchPlugin_ConstraintMiddle::ID(), aHasSketchPlane);
298 aMsg->setState(SketchPlugin_ConstraintMirror::ID(), aHasSketchPlane);
299 aMsg->setState(SketchPlugin_Fillet::ID(), aHasSketchPlane);
300 aMsg->setState(SketchPlugin_ConstraintAngle::ID(), aHasSketchPlane);
301 aMsg->setState(SketchPlugin_MultiRotation::ID(), aHasSketchPlane);
302 aMsg->setState(SketchPlugin_MultiTranslation::ID(), aHasSketchPlane);
303 aMsg->setState(SketchPlugin_Split::ID(), aHasSketchPlane);
304 aMsg->setState(SketchPlugin_Trim::ID(), aHasSketchPlane);
305 aMsg->setState(SketchPlugin_MacroArc::ID(), aHasSketchPlane);
306 aMsg->setState(SketchPlugin_MacroCircle::ID(), aHasSketchPlane);
307 aMsg->setState(SketchPlugin_ConstraintDistanceHorizontal::ID(), aHasSketchPlane);
308 aMsg->setState(SketchPlugin_ConstraintDistanceVertical::ID(), aHasSketchPlane);
309 // SketchRectangle is a python feature, so its ID is passed just as a string
310 aMsg->setState("SketchRectangle", aHasSketchPlane);