1 // Copyright (C) 2014-2023 CEA, EDF
3 // This library is free software; you can redistribute it and/or
4 // modify it under the terms of the GNU Lesser General Public
5 // License as published by the Free Software Foundation; either
6 // version 2.1 of the License, or (at your option) any later version.
8 // This library is distributed in the hope that it will be useful,
9 // but WITHOUT ANY WARRANTY; without even the implied warranty of
10 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 // Lesser General Public License for more details.
13 // You should have received a copy of the GNU Lesser General Public
14 // License along with this library; if not, write to the Free Software
15 // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 #include "SketchAPI_Sketch.h"
21 //--------------------------------------------------------------------------------------
22 #include <SketchPlugin_Constraint.h>
23 #include <SketchPlugin_ConstraintAngle.h>
24 #include <SketchPlugin_ConstraintCoincidence.h>
25 #include <SketchPlugin_ConstraintCollinear.h>
26 #include <SketchPlugin_ConstraintDistance.h>
27 #include <SketchPlugin_ConstraintDistanceHorizontal.h>
28 #include <SketchPlugin_ConstraintDistanceVertical.h>
29 #include <SketchPlugin_ConstraintEqual.h>
30 #include <SketchPlugin_Fillet.h>
31 #include <SketchPlugin_ConstraintHorizontal.h>
32 #include <SketchPlugin_ConstraintLength.h>
33 #include <SketchPlugin_ConstraintMiddle.h>
34 #include <SketchPlugin_ConstraintMirror.h>
35 #include <SketchPlugin_ConstraintParallel.h>
36 #include <SketchPlugin_ConstraintPerpendicular.h>
37 #include <SketchPlugin_ConstraintRadius.h>
38 #include <SketchPlugin_ConstraintRigid.h>
39 #include <SketchPlugin_CurveFitting.h>
40 #include <SketchPlugin_Trim.h>
41 #include <SketchPlugin_Split.h>
42 #include <SketchPlugin_ConstraintTangent.h>
43 #include <SketchPlugin_ConstraintVertical.h>
44 #include <SketchPlugin_MacroBSpline.h>
45 #include <SketchPlugin_SketchCopy.h>
46 #include <SketchPlugin_Offset.h>
47 #include <SketcherPrs_Tools.h>
48 //--------------------------------------------------------------------------------------
49 #include <ModelAPI_Events.h>
50 #include <ModelAPI_CompositeFeature.h>
51 #include <ModelAPI_ResultConstruction.h>
52 #include <ModelHighAPI_Double.h>
53 #include <ModelHighAPI_Dumper.h>
54 #include <ModelHighAPI_RefAttr.h>
55 #include <ModelHighAPI_Selection.h>
56 #include <ModelHighAPI_Services.h>
57 #include <ModelHighAPI_Tools.h>
58 //--------------------------------------------------------------------------------------
59 #include "SketchAPI_Arc.h"
60 #include "SketchAPI_BSpline.h"
61 #include "SketchAPI_Circle.h"
62 #include "SketchAPI_Ellipse.h"
63 #include "SketchAPI_EllipticArc.h"
64 #include "SketchAPI_IntersectionPoint.h"
65 #include "SketchAPI_Line.h"
66 #include "SketchAPI_MacroArc.h"
67 #include "SketchAPI_MacroCircle.h"
68 #include "SketchAPI_MacroEllipse.h"
69 #include "SketchAPI_MacroEllipticArc.h"
70 #include "SketchAPI_Mirror.h"
71 #include "SketchAPI_Offset.h"
72 #include "SketchAPI_Point.h"
73 #include "SketchAPI_Projection.h"
74 #include "SketchAPI_Rectangle.h"
75 #include "SketchAPI_Rotation.h"
76 #include "SketchAPI_Translation.h"
77 //--------------------------------------------------------------------------------------
78 #include <GeomAPI_Curve.h>
79 #include <GeomAPI_Dir2d.h>
80 #include <GeomAPI_PlanarEdges.h>
81 #include <GeomAPI_ShapeExplorer.h>
82 #include <GeomAPI_XY.h>
83 #include <GeomAlgoAPI_SketchBuilder.h>
87 //--------------------------------------------------------------------------------------
88 SketchAPI_Sketch::SketchAPI_Sketch(
89 const std::shared_ptr<ModelAPI_Feature> & theFeature)
90 : ModelHighAPI_Interface(theFeature)
95 SketchAPI_Sketch::SketchAPI_Sketch(
96 const std::shared_ptr<ModelAPI_Feature> & theFeature,
97 const std::shared_ptr<GeomAPI_Ax3> & thePlane)
98 : ModelHighAPI_Interface(theFeature)
105 SketchAPI_Sketch::SketchAPI_Sketch(
106 const std::shared_ptr<ModelAPI_Feature> & theFeature,
107 const ModelHighAPI_Selection & theExternal)
108 : ModelHighAPI_Interface(theFeature)
111 setExternal(theExternal);
115 SketchAPI_Sketch::SketchAPI_Sketch(
116 const std::shared_ptr<ModelAPI_Feature> & theFeature,
117 std::shared_ptr<ModelAPI_Object> thePlaneObject)
118 : ModelHighAPI_Interface(theFeature)
121 setExternal(thePlaneObject);
125 SketchAPI_Sketch::~SketchAPI_Sketch()
130 //--------------------------------------------------------------------------------------
131 std::shared_ptr<ModelAPI_CompositeFeature> SketchAPI_Sketch::compositeFeature() const
133 return std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(feature());
136 //--------------------------------------------------------------------------------------
137 void SketchAPI_Sketch::setPlane(const std::shared_ptr<GeomAPI_Ax3> & thePlane)
139 fillAttribute(thePlane->origin(), myorigin);
140 fillAttribute(thePlane->dirX(), mydirX);
141 fillAttribute(thePlane->normal(), mynormal);
146 void SketchAPI_Sketch::setPlane(const ModelHighAPI_Selection & thePlane,
147 bool theRemoveExternalDependency)
149 FeaturePtr aSketch = feature();
151 DocumentPtr aDoc = aSketch->document();
152 bool useVisible = false;
153 FeaturePtr aCurFeatureBefore = aDoc->currentFeature(useVisible);
154 aDoc->setCurrentFeature(aSketch, useVisible);
156 if (theRemoveExternalDependency)
157 aSketch->customAction(SketchPlugin_Sketch::ACTION_REMOVE_EXTERNAL());
159 setExternal(thePlane);
161 aDoc->setCurrentFeature(aCurFeatureBefore, useVisible);
164 //--------------------------------------------------------------------------------------
165 void SketchAPI_Sketch::setExternal(const ModelHighAPI_Selection & theExternal)
167 fillAttribute(theExternal, myexternal);
172 void SketchAPI_Sketch::setExternal(std::shared_ptr<ModelAPI_Object> thePlaneObject)
174 ResultPtr aRes = std::dynamic_pointer_cast<ModelAPI_Result>(thePlaneObject);
175 ModelHighAPI_Selection aSel(aRes);
179 //--------------------------------------------------------------------------------------
180 void SketchAPI_Sketch::setValue(
181 const std::shared_ptr<ModelHighAPI_Interface> & theConstraint,
182 const ModelHighAPI_Double & theValue)
184 fillAttribute(theValue, theConstraint->feature()->real(SketchPlugin_Constraint::VALUE()));
186 // theConstraint->execute();
189 //--------------------------------------------------------------------------------------
190 std::list<ModelHighAPI_Selection> SketchAPI_Sketch::selectFace() const
192 const_cast<SketchAPI_Sketch*>(this)->execute();
194 std::list<ModelHighAPI_Selection> aSelectionList;
196 ResultConstructionPtr aResultConstruction =
197 std::dynamic_pointer_cast<ModelAPI_ResultConstruction>(feature()->firstResult());
198 if (aResultConstruction.get() == NULL)
199 return aSelectionList;
201 for (int anIndex = 0; anIndex < aResultConstruction->facesNum(); ++anIndex) {
202 aSelectionList.push_back(
203 ModelHighAPI_Selection(aResultConstruction,
204 aResultConstruction->face(anIndex)));
207 return aSelectionList;
210 //--------------------------------------------------------------------------------------
211 SketchPtr addSketch(const std::shared_ptr<ModelAPI_Document> & thePart,
212 const std::shared_ptr<GeomAPI_Ax3> & thePlane)
214 std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(SketchAPI_Sketch::ID());
215 return SketchPtr(new SketchAPI_Sketch(aFeature, thePlane));
218 SketchPtr addSketch(const std::shared_ptr<ModelAPI_Document> & thePart,
219 const ModelHighAPI_Selection & theExternal)
221 std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(SketchAPI_Sketch::ID());
222 return SketchPtr(new SketchAPI_Sketch(aFeature, theExternal));
225 SketchPtr addSketch(const std::shared_ptr<ModelAPI_Document> & thePart,
226 const std::wstring & theExternalName)
228 std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(SketchAPI_Sketch::ID());
230 new SketchAPI_Sketch(aFeature, ModelHighAPI_Selection("FACE", theExternalName)));
233 SketchPtr addSketch(const std::shared_ptr<ModelAPI_Document> & thePart,
234 std::shared_ptr<ModelAPI_Object> thePlaneObject)
236 std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(SketchAPI_Sketch::ID());
237 return SketchPtr(new SketchAPI_Sketch(aFeature, thePlaneObject));
240 //--------------------------------------------------------------------------------------
241 SketchPtr copySketch(const std::shared_ptr<ModelAPI_Document> & thePart,
242 const SketchPtr & theSketch)
244 FeaturePtr aCopyer = thePart->addFeature(SketchPlugin_SketchCopy::ID());
245 aCopyer->reference(SketchPlugin_SketchCopy::BASE_ID())->setValue(theSketch->feature());
248 FeaturePtr aNewSketch = thePart->nextFeature(aCopyer);
250 // perform removing the macro-feature
251 thePart->removeFeature(aCopyer);
254 return SketchPtr(new SketchAPI_Sketch(aNewSketch));
258 //--------------------------------------------------------------------------------------
259 std::list< std::shared_ptr<SketchAPI_Point> > SketchAPI_Sketch::getFreePoints()
261 std::list< std::shared_ptr<SketchAPI_Point> > aFreePoints;
262 std::list<ResultPtr> aPoints = SketcherPrs_Tools::getFreePoints(compositeFeature());
263 for (std::list<ResultPtr>::iterator anIt = aPoints.begin(); anIt != aPoints.end(); ++anIt) {
264 FeaturePtr aFeature = ModelAPI_Feature::feature(*anIt);
265 PointPtr aPoint(new SketchAPI_Point(aFeature));
266 aFreePoints.push_back(aPoint);
271 //--------------------------------------------------------------------------------------
272 static GeomCurvePtr untrimmedCurve(GeomShapePtr theShape)
274 GeomCurvePtr aCurve(new GeomAPI_Curve(theShape));
275 if (aCurve->isTrimmed())
276 aCurve = aCurve->basisCurve();
280 void SketchAPI_Sketch::changeFacesOrder(
281 const std::list<std::list<ModelHighAPI_Selection> >& theFaces)
283 // collect faces of the sketch
284 ResultConstructionPtr aSketchResult =
285 std::dynamic_pointer_cast<ModelAPI_ResultConstruction>(feature()->lastResult());
286 if (!aSketchResult) {
287 // sketch is nested to a boolean operation, thus, it has no result yet.
288 feature()->execute();
290 std::dynamic_pointer_cast<ModelAPI_ResultConstruction>(feature()->lastResult());
292 std::list<GeomFacePtr> aFaces;
293 int aFacesNum = aSketchResult->facesNum();
294 for (int i = 0; i < aFacesNum; ++i)
295 aFaces.push_back(aSketchResult->face(i));
296 // find new faces order according to the given lists of edges
297 std::list<GeomFacePtr> aNewFacesOrder;
298 std::list<std::list<ModelHighAPI_Selection> >::const_iterator anIt = theFaces.begin();
299 for (; anIt != theFaces.end(); ++anIt) {
300 // find the appropriate face
301 std::list<GeomFacePtr>::iterator aFIt = aFaces.begin();
302 for (; aFIt != aFaces.end(); ++aFIt) {
303 std::list<ModelHighAPI_Selection>::const_iterator aEdgeIt = anIt->begin();
304 GeomAPI_ShapeExplorer aFExp(*aFIt, GeomAPI_Shape::EDGE);
305 for (; aEdgeIt != anIt->end() && aFExp.more(); ++aEdgeIt, aFExp.next()) {
306 ResultPtr aCurRes = aEdgeIt->resultSubShapePair().first;
309 GeomCurvePtr aCurve1 = untrimmedCurve(aCurRes->shape());
310 GeomCurvePtr aCurve2 = untrimmedCurve(aFExp.current());
311 if (!aCurve1->isEqual(aCurve2))
315 if (aEdgeIt == anIt->end() && !aFExp.more()) {
317 aNewFacesOrder.push_back(*aFIt);
323 // place the rest faces at the end of new faces list
325 aNewFacesOrder.insert(aNewFacesOrder.end(), aFaces.begin(), aFaces.end());
326 // update the result of the sketch with the new order of faces
327 aSketchResult->setFacesOrder(aNewFacesOrder);
330 //--------------------------------------------------------------------------------------
331 std::shared_ptr<SketchAPI_Point> SketchAPI_Sketch::addPoint(
332 double theX, double theY)
334 std::shared_ptr<ModelAPI_Feature> aFeature =
335 compositeFeature()->addFeature(SketchPlugin_Point::ID());
336 return PointPtr(new SketchAPI_Point(aFeature, theX, theY));
338 std::shared_ptr<SketchAPI_Point> SketchAPI_Sketch::addPoint(
339 const std::shared_ptr<GeomAPI_Pnt2d> & thePoint)
341 std::shared_ptr<ModelAPI_Feature> aFeature =
342 compositeFeature()->addFeature(SketchPlugin_Point::ID());
343 return PointPtr(new SketchAPI_Point(aFeature, thePoint));
345 std::shared_ptr<SketchAPI_Point>
346 SketchAPI_Sketch::addPoint(const ModelHighAPI_Selection & theExternal)
348 std::shared_ptr<ModelAPI_Feature> aFeature =
349 compositeFeature()->addFeature(SketchPlugin_Point::ID());
350 return PointPtr(new SketchAPI_Point(aFeature, theExternal));
352 std::shared_ptr<SketchAPI_Point> SketchAPI_Sketch::addPoint(const std::wstring & theExternalName)
354 std::shared_ptr<ModelAPI_Feature> aFeature =
355 compositeFeature()->addFeature(SketchPlugin_Point::ID());
356 return PointPtr(new SketchAPI_Point(aFeature, theExternalName));
359 //--------------------------------------------------------------------------------------
360 std::shared_ptr<SketchAPI_IntersectionPoint> SketchAPI_Sketch::addIntersectionPoint(
361 const ModelHighAPI_Selection & theExternal,
364 std::shared_ptr<ModelAPI_Feature> aFeature =
365 compositeFeature()->addFeature(SketchPlugin_IntersectionPoint::ID());
366 IntersectionPointPtr anIntersection(new SketchAPI_IntersectionPoint(aFeature, theExternal));
367 anIntersection->setIncludeToResult(theKeepResult);
368 return anIntersection;
370 std::shared_ptr<SketchAPI_IntersectionPoint> SketchAPI_Sketch::addIntersectionPoint(
371 const std::wstring & theExternalName,
374 std::shared_ptr<ModelAPI_Feature> aFeature =
375 compositeFeature()->addFeature(SketchPlugin_IntersectionPoint::ID());
376 IntersectionPointPtr anIntersection(new SketchAPI_IntersectionPoint(aFeature, theExternalName));
377 anIntersection->setIncludeToResult(theKeepResult);
378 return anIntersection;
381 //--------------------------------------------------------------------------------------
382 std::shared_ptr<SketchAPI_Line> SketchAPI_Sketch::addLine(double theX1, double theY1,
383 double theX2, double theY2)
385 std::shared_ptr<ModelAPI_Feature> aFeature =
386 compositeFeature()->addFeature(SketchPlugin_Line::ID());
387 return LinePtr(new SketchAPI_Line(aFeature, theX1, theY1, theX2, theY2));
389 std::shared_ptr<SketchAPI_Line> SketchAPI_Sketch::addLine(
390 const std::shared_ptr<GeomAPI_Pnt2d> & theStartPoint,
391 const std::shared_ptr<GeomAPI_Pnt2d> & theEndPoint)
393 std::shared_ptr<ModelAPI_Feature> aFeature =
394 compositeFeature()->addFeature(SketchPlugin_Line::ID());
395 return LinePtr(new SketchAPI_Line(aFeature, theStartPoint, theEndPoint));
397 std::shared_ptr<SketchAPI_Line>
398 SketchAPI_Sketch::addLine(const ModelHighAPI_Selection & theExternal)
400 std::shared_ptr<ModelAPI_Feature> aFeature =
401 compositeFeature()->addFeature(SketchPlugin_Line::ID());
402 return LinePtr(new SketchAPI_Line(aFeature, theExternal));
404 std::shared_ptr<SketchAPI_Line> SketchAPI_Sketch::addLine(const std::wstring & theExternalName)
406 std::shared_ptr<ModelAPI_Feature> aFeature =
407 compositeFeature()->addFeature(SketchPlugin_Line::ID());
408 return LinePtr(new SketchAPI_Line(aFeature, theExternalName));
411 //--------------------------------------------------------------------------------------
412 std::shared_ptr<SketchAPI_Rectangle> SketchAPI_Sketch::addRectangle(double theX1, double theY1,
413 double theX2, double theY2)
415 std::shared_ptr<ModelAPI_Feature> aFeature =
416 compositeFeature()->addFeature(SketchAPI_Rectangle::ID());
417 return RectanglePtr(new SketchAPI_Rectangle(aFeature, theX1, theY1, theX2, theY2));
419 std::shared_ptr<SketchAPI_Rectangle> SketchAPI_Sketch::addRectangle(
420 const std::shared_ptr<GeomAPI_Pnt2d> & theStartPoint,
421 const std::shared_ptr<GeomAPI_Pnt2d> & theEndPoint)
423 std::shared_ptr<ModelAPI_Feature> aFeature =
424 compositeFeature()->addFeature(SketchAPI_Rectangle::ID());
425 return RectanglePtr(new SketchAPI_Rectangle(aFeature, theStartPoint, theEndPoint));
428 static std::shared_ptr<GeomAPI_Pnt2d> pointCoordinates(
429 const std::pair<std::shared_ptr<GeomAPI_Pnt2d>, ModelHighAPI_RefAttr> & thePoint)
432 return thePoint.first;
434 AttributePtr anAttr = thePoint.second.attr();
435 if (thePoint.second.object()) {
436 FeaturePtr aFeature = ModelAPI_Feature::feature(thePoint.second.object());
438 anAttr = aFeature->attribute(SketchPlugin_Point::COORD_ID());
441 std::shared_ptr<GeomDataAPI_Point2D> aPntAttr =
442 std::dynamic_pointer_cast<GeomDataAPI_Point2D>(anAttr);
444 return aPntAttr->pnt();
445 return std::shared_ptr<GeomAPI_Pnt2d>();
448 std::shared_ptr<SketchAPI_Rectangle> SketchAPI_Sketch::addRectangleCentered(
449 const std::pair<std::shared_ptr<GeomAPI_Pnt2d>, ModelHighAPI_RefAttr> & theCenter,
450 const std::pair<std::shared_ptr<GeomAPI_Pnt2d>, ModelHighAPI_RefAttr> & theCorner)
452 std::shared_ptr<ModelAPI_Feature> aFeature =
453 compositeFeature()->addFeature(SketchAPI_Rectangle::ID());
454 RectanglePtr aRect(new SketchAPI_Rectangle(aFeature));
455 fillAttribute("RectangleTypeCentered", aRect->type());
456 if (!theCenter.second.isEmpty())
457 fillAttribute(theCenter.second, aRect->centerPointRef());
458 fillAttribute(pointCoordinates(theCenter), aRect->centerPoint());
459 fillAttribute(pointCoordinates(theCorner), aRect->cornerPoint());
462 if (!theCorner.second.isEmpty() && aRect->linesList()->size() > 1) {
463 // get start point of the last line in rectangle and apply coindidence constraint
464 FeaturePtr aLine = ModelAPI_Feature::feature(aRect->linesList()->object(3));
465 AttributePtr aEndPnt = aLine->attribute(SketchPlugin_Line::START_ID());
466 setCoincident(ModelHighAPI_RefAttr(aEndPnt), theCorner.second);
471 //--------------------------------------------------------------------------------------
472 std::shared_ptr<SketchAPI_Circle> SketchAPI_Sketch::addCircle(double theCenterX,
476 std::shared_ptr<ModelAPI_Feature> aFeature =
477 compositeFeature()->addFeature(SketchPlugin_Circle::ID());
478 return CirclePtr(new SketchAPI_Circle(aFeature, theCenterX, theCenterY, theRadius));
481 std::shared_ptr<SketchAPI_Circle> SketchAPI_Sketch::addCircle(
482 const std::shared_ptr<GeomAPI_Pnt2d>& theCenter,
485 std::shared_ptr<ModelAPI_Feature> aFeature =
486 compositeFeature()->addFeature(SketchPlugin_Circle::ID());
487 return CirclePtr(new SketchAPI_Circle(aFeature, theCenter, theRadius));
490 std::shared_ptr<SketchAPI_MacroCircle> SketchAPI_Sketch::addCircle(double theCenterX,
495 std::shared_ptr<ModelAPI_Feature> aFeature =
496 compositeFeature()->addFeature(SketchPlugin_MacroCircle::ID());
497 return MacroCirclePtr(new SketchAPI_MacroCircle(aFeature, theCenterX, theCenterY,
498 thePassedX, thePassedY));
501 std::shared_ptr<SketchAPI_MacroCircle> SketchAPI_Sketch::addCircle(
502 const std::shared_ptr<GeomAPI_Pnt2d>& theCenterPoint,
503 const std::shared_ptr<GeomAPI_Pnt2d>& thePassedPoint)
505 std::shared_ptr<ModelAPI_Feature> aFeature =
506 compositeFeature()->addFeature(SketchPlugin_MacroCircle::ID());
507 return MacroCirclePtr(new SketchAPI_MacroCircle(aFeature, theCenterPoint, thePassedPoint));
510 std::shared_ptr<SketchAPI_MacroCircle> SketchAPI_Sketch::addCircle(double theX1, double theY1,
511 double theX2, double theY2,
512 double theX3, double theY3)
514 std::shared_ptr<ModelAPI_Feature> aFeature =
515 compositeFeature()->addFeature(SketchPlugin_MacroCircle::ID());
516 return MacroCirclePtr(new SketchAPI_MacroCircle(aFeature, theX1, theY1,
521 std::shared_ptr<SketchAPI_MacroCircle> SketchAPI_Sketch::addCircle(
522 const std::shared_ptr<GeomAPI_Pnt2d>& thePoint1,
523 const std::shared_ptr<GeomAPI_Pnt2d>& thePoint2,
524 const std::shared_ptr<GeomAPI_Pnt2d>& thePoint3)
526 std::shared_ptr<ModelAPI_Feature> aFeature =
527 compositeFeature()->addFeature(SketchPlugin_MacroCircle::ID());
528 return MacroCirclePtr(new SketchAPI_MacroCircle(aFeature, thePoint1, thePoint2, thePoint3));
531 std::shared_ptr<SketchAPI_Circle>
532 SketchAPI_Sketch::addCircle(const ModelHighAPI_Selection & theExternal)
534 std::shared_ptr<ModelAPI_Feature> aFeature =
535 compositeFeature()->addFeature(SketchPlugin_Circle::ID());
536 return CirclePtr(new SketchAPI_Circle(aFeature, theExternal));
539 std::shared_ptr<SketchAPI_Circle> SketchAPI_Sketch::addCircle(const std::wstring & theExternalName)
541 std::shared_ptr<ModelAPI_Feature> aFeature =
542 compositeFeature()->addFeature(SketchPlugin_Circle::ID());
543 return CirclePtr(new SketchAPI_Circle(aFeature, theExternalName));
546 //--------------------------------------------------------------------------------------
547 std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(double theCenterX, double theCenterY,
548 double theStartX, double theStartY,
549 double theEndX, double theEndY,
552 std::shared_ptr<ModelAPI_Feature> aFeature =
553 compositeFeature()->addFeature(SketchPlugin_Arc::ID());
554 return ArcPtr(new SketchAPI_Arc(aFeature,
555 theCenterX, theCenterY,
556 theStartX, theStartY,
561 std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(
562 const std::shared_ptr<GeomAPI_Pnt2d>& theCenter,
563 const std::shared_ptr<GeomAPI_Pnt2d>& theStart,
564 const std::shared_ptr<GeomAPI_Pnt2d>& theEnd,
567 std::shared_ptr<ModelAPI_Feature> aFeature =
568 compositeFeature()->addFeature(SketchPlugin_Arc::ID());
569 return ArcPtr(new SketchAPI_Arc(aFeature, theCenter, theStart, theEnd, theInversed));
572 std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(double theStartX, double theStartY,
573 double theEndX, double theEndY,
574 double thePassedX, double thePassedY)
576 std::shared_ptr<ModelAPI_Feature> aFeature =
577 compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
578 return MacroArcPtr(new SketchAPI_MacroArc(aFeature,
579 theStartX, theStartY,
581 thePassedX, thePassedY));
584 std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(
585 const std::shared_ptr<GeomAPI_Pnt2d>& theStart,
586 const std::shared_ptr<GeomAPI_Pnt2d>& theEnd,
587 const std::shared_ptr<GeomAPI_Pnt2d>& thePassed)
589 std::shared_ptr<ModelAPI_Feature> aFeature =
590 compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
591 return MacroArcPtr(new SketchAPI_MacroArc(aFeature, theStart, theEnd, thePassed));
594 std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(
595 const ModelHighAPI_RefAttr& theTangentPoint,
596 double theEndX, double theEndY,
600 std::shared_ptr<ModelAPI_Feature> aFeature =
601 compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
602 MacroArcPtr aMacroArc(new SketchAPI_MacroArc(aFeature));
604 aMacroArc->setByTransversal(theTangentPoint, theEndX, theEndY, theInversed);
606 aMacroArc->setByTangent(theTangentPoint, theEndX, theEndY, theInversed);
610 std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(
611 const ModelHighAPI_RefAttr& theTangentPoint,
612 const std::shared_ptr<GeomAPI_Pnt2d>& theEnd,
616 std::shared_ptr<ModelAPI_Feature> aFeature =
617 compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
618 MacroArcPtr aMacroArc(new SketchAPI_MacroArc(aFeature));
620 aMacroArc->setByTransversal(theTangentPoint, theEnd, theInversed);
622 aMacroArc->setByTangent(theTangentPoint, theEnd, theInversed);
626 std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(const ModelHighAPI_Selection & theExternal)
628 std::shared_ptr<ModelAPI_Feature> aFeature =
629 compositeFeature()->addFeature(SketchPlugin_Arc::ID());
630 return ArcPtr(new SketchAPI_Arc(aFeature, theExternal));
633 std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(const std::wstring & theExternalName)
635 std::shared_ptr<ModelAPI_Feature> aFeature =
636 compositeFeature()->addFeature(SketchPlugin_Arc::ID());
637 return ArcPtr(new SketchAPI_Arc(aFeature, theExternalName));
640 //--------------------------------------------------------------------------------------
641 std::shared_ptr<SketchAPI_Ellipse> SketchAPI_Sketch::addEllipse(
642 double theCenterX, double theCenterY,
643 double theFocusX, double theFocusY,
644 double theMinorRadius)
646 std::shared_ptr<ModelAPI_Feature> aFeature =
647 compositeFeature()->addFeature(SketchPlugin_Ellipse::ID());
648 return EllipsePtr(new SketchAPI_Ellipse(aFeature,
649 theCenterX, theCenterY, theFocusX, theFocusY, theMinorRadius));
652 std::shared_ptr<SketchAPI_Ellipse> SketchAPI_Sketch::addEllipse(
653 const std::shared_ptr<GeomAPI_Pnt2d>& theCenter,
654 const std::shared_ptr<GeomAPI_Pnt2d>& theFocus,
655 double theMinorRadius)
657 std::shared_ptr<ModelAPI_Feature> aFeature =
658 compositeFeature()->addFeature(SketchPlugin_Ellipse::ID());
659 return EllipsePtr(new SketchAPI_Ellipse(aFeature, theCenter, theFocus, theMinorRadius));
662 std::shared_ptr<SketchAPI_MacroEllipse> SketchAPI_Sketch::addEllipse(
663 double thePoint1X, double thePoint1Y,
664 double thePoint2X, double thePoint2Y,
665 double thePassedX, double thePassedY,
668 std::shared_ptr<ModelAPI_Feature> aFeature =
669 compositeFeature()->addFeature(SketchPlugin_MacroEllipse::ID());
670 return MacroEllipsePtr(new SketchAPI_MacroEllipse(aFeature,
671 thePoint1X, thePoint1Y, thePoint2X, thePoint2Y, thePassedX, thePassedY, isPoint1Center));
674 std::shared_ptr<SketchAPI_MacroEllipse> SketchAPI_Sketch::addEllipse(
675 const PointOrReference& thePoint1,
676 const PointOrReference& thePoint2,
677 const PointOrReference& thePassedPoint,
680 std::shared_ptr<ModelAPI_Feature> aFeature =
681 compositeFeature()->addFeature(SketchPlugin_MacroEllipse::ID());
682 MacroEllipsePtr anEllipse;
683 if (thePoint1.second.isEmpty() &&
684 thePoint2.second.isEmpty() &&
685 thePassedPoint.second.isEmpty()) {
686 anEllipse.reset(new SketchAPI_MacroEllipse(aFeature,
687 thePoint1.first, thePoint2.first, thePassedPoint.first, isPoint1Center));
690 anEllipse.reset(new SketchAPI_MacroEllipse(aFeature,
691 thePoint1.first, thePoint1.second,
692 thePoint2.first, thePoint2.second,
693 thePassedPoint.first, thePassedPoint.second,
699 std::shared_ptr<SketchAPI_Ellipse> SketchAPI_Sketch::addEllipse(
700 const ModelHighAPI_Selection & theExternal)
702 std::shared_ptr<ModelAPI_Feature> aFeature =
703 compositeFeature()->addFeature(SketchPlugin_Ellipse::ID());
704 return EllipsePtr(new SketchAPI_Ellipse(aFeature, theExternal));
707 std::shared_ptr<SketchAPI_Ellipse> SketchAPI_Sketch::addEllipse(
708 const std::wstring & theExternalName)
710 std::shared_ptr<ModelAPI_Feature> aFeature =
711 compositeFeature()->addFeature(SketchPlugin_Ellipse::ID());
712 return EllipsePtr(new SketchAPI_Ellipse(aFeature, theExternalName));
715 //--------------------------------------------------------------------------------------
716 std::shared_ptr<SketchAPI_EllipticArc> SketchAPI_Sketch::addEllipticArc(
717 double theCenterX, double theCenterY,
718 double theFocusX, double theFocusY,
719 double theStartX, double theStartY,
720 double theEndX, double theEndY,
723 std::shared_ptr<ModelAPI_Feature> aFeature =
724 compositeFeature()->addFeature(SketchPlugin_EllipticArc::ID());
725 return EllipticArcPtr(new SketchAPI_EllipticArc(aFeature,
726 theCenterX, theCenterY,
727 theFocusX, theFocusY,
728 theStartX, theStartY,
733 std::shared_ptr<SketchAPI_MacroEllipticArc> SketchAPI_Sketch::addEllipticArc(
734 const PointOrReference& theCenter,
735 const PointOrReference& theMajorAxisPoint,
736 const PointOrReference& theStartPoint,
737 const PointOrReference& theEndPoint,
740 std::shared_ptr<ModelAPI_Feature> aFeature =
741 compositeFeature()->addFeature(SketchPlugin_MacroEllipticArc::ID());
742 return MacroEllipticArcPtr(new SketchAPI_MacroEllipticArc(aFeature,
743 theCenter.first, theCenter.second,
744 theMajorAxisPoint.first, theMajorAxisPoint.second,
745 theStartPoint.first, theStartPoint.second,
746 theEndPoint.first, theEndPoint.second,
750 std::shared_ptr<SketchAPI_EllipticArc> SketchAPI_Sketch::addEllipticArc(
751 const ModelHighAPI_Selection & theExternal)
753 std::shared_ptr<ModelAPI_Feature> aFeature =
754 compositeFeature()->addFeature(SketchPlugin_EllipticArc::ID());
755 return EllipticArcPtr(new SketchAPI_EllipticArc(aFeature, theExternal));
758 std::shared_ptr<SketchAPI_EllipticArc> SketchAPI_Sketch::addEllipticArc(
759 const std::wstring & theExternalName)
761 std::shared_ptr<ModelAPI_Feature> aFeature =
762 compositeFeature()->addFeature(SketchPlugin_EllipticArc::ID());
763 return EllipticArcPtr(new SketchAPI_EllipticArc(aFeature, theExternalName));
766 //--------------------------------------------------------------------------------------
768 std::shared_ptr<SketchAPI_BSpline> SketchAPI_Sketch::addSpline(
769 const ModelHighAPI_Selection & external,
771 const std::list<PointOrReference>& poles,
772 const std::list<ModelHighAPI_Double>& weights,
773 const std::list<ModelHighAPI_Double>& knots,
774 const std::list<ModelHighAPI_Integer>& multiplicities,
777 // split poles and references to other shapes
778 bool hasReference = false;
779 std::list<GeomPnt2dPtr> aPoints;
780 std::list<ModelHighAPI_RefAttr> aReferences;
781 for (std::list<PointOrReference>::const_iterator it = poles.begin(); it != poles.end(); ++it) {
782 aPoints.push_back(it->first);
783 aReferences.push_back(it->second);
784 if (!it->second.isEmpty())
789 CompositeFeaturePtr aSketch = compositeFeature();
791 // use macro-feature to create coincidences to referred features
792 FeaturePtr aMacroFeature = aSketch->addFeature(
793 periodic ? SketchPlugin_MacroBSplinePeriodic::ID() : SketchPlugin_MacroBSpline::ID());
794 AttributePoint2DArrayPtr aPolesAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2DArray>(
795 aMacroFeature->attribute(SketchPlugin_MacroBSpline::POLES_ID()));
796 AttributeDoubleArrayPtr aWeightsAttr =
797 aMacroFeature->data()->realArray(SketchPlugin_MacroBSpline::WEIGHTS_ID());
798 AttributeRefAttrListPtr aPolesRefAttr =
799 aMacroFeature->data()->refattrlist(SketchPlugin_MacroBSpline::REF_POLES_ID());
800 // always generate a control polygon to apply coincidences correctly
801 aMacroFeature->boolean(SketchPlugin_MacroBSpline::CONTROL_POLYGON_ID())->setValue(true);
802 // initialize B-spline attributes
803 fillAttribute(aPoints, aPolesAttr);
805 fillAttribute(std::list<ModelHighAPI_Double>(poles.size(), 1.0), aWeightsAttr);
807 fillAttribute(weights, aWeightsAttr);
808 fillAttribute(aReferences, aPolesRefAttr);
809 apply(); // to kill macro-feature
811 // find created B-spline feature
812 const std::string& aKindToFind =
813 periodic ? SketchPlugin_BSplinePeriodic::ID() : SketchPlugin_BSpline::ID();
814 int aNbSubs = aSketch->numberOfSubs();
815 for (int anIndex = aNbSubs - 1; anIndex >= 0; --anIndex) {
816 FeaturePtr aFeature = aSketch->subFeature(anIndex);
817 if (aFeature->getKind() == aKindToFind) {
818 aBSpline.reset(periodic ? new SketchAPI_BSplinePeriodic(aFeature)
819 : new SketchAPI_BSpline(aFeature));
826 // compute B-spline by parameters
827 FeaturePtr aFeature = aSketch->addFeature(
828 periodic ? SketchPlugin_BSplinePeriodic::ID() : SketchPlugin_BSpline::ID());
830 aBSpline.reset(periodic ? new SketchAPI_BSplinePeriodic(aFeature)
831 : new SketchAPI_BSpline(aFeature));
832 if (external.variantType() != ModelHighAPI_Selection::VT_Empty)
833 aBSpline->setByExternal(external);
834 else if (knots.empty() || multiplicities.empty())
835 aBSpline->setByDegreePolesAndWeights(degree, aPoints, weights);
837 aBSpline->setByParameters(degree, aPoints, weights, knots, multiplicities);
842 //--------------------------------------------------------------------------------------
843 static std::shared_ptr<SketchAPI_BSpline> buildInterpolation(
844 const CompositeFeaturePtr& theSketch,
845 const FeaturePtr& theCurveFittingFeature,
846 const std::list<ModelHighAPI_RefAttr>& points,
850 AttributeBooleanPtr aPeriodicAttr =
851 theCurveFittingFeature->boolean(SketchPlugin_CurveFitting::PERIODIC_ID());
852 fillAttribute(periodic, aPeriodicAttr);
853 AttributeBooleanPtr aClosedAttr =
854 theCurveFittingFeature->boolean(SketchPlugin_CurveFitting::CLOSED_ID());
855 fillAttribute(closed, aClosedAttr);
856 AttributeRefAttrListPtr aPointsAttr =
857 theCurveFittingFeature->refattrlist(SketchPlugin_CurveFitting::POINTS_ID());
858 fillAttribute(points, aPointsAttr);
859 apply(); // to execute and kill the macro-feature
861 // find created B-spline feature
863 const std::string& aKindToFind =
864 periodic ? SketchPlugin_BSplinePeriodic::ID() : SketchPlugin_BSpline::ID();
865 int aNbSubs = theSketch->numberOfSubs();
866 for (int anIndex = aNbSubs - 1; anIndex >= 0; --anIndex) {
867 FeaturePtr aFeature = theSketch->subFeature(anIndex);
868 if (aFeature->getKind() == aKindToFind) {
869 aBSpline.reset(periodic ? new SketchAPI_BSplinePeriodic(aFeature)
870 : new SketchAPI_BSpline(aFeature));
878 std::shared_ptr<SketchAPI_BSpline> SketchAPI_Sketch::addInterpolation(
879 const std::list<ModelHighAPI_RefAttr>& points,
883 CompositeFeaturePtr aSketch = compositeFeature();
884 FeaturePtr anInterpFeature = aSketch->addFeature(SketchPlugin_CurveFitting::ID());
885 anInterpFeature->string(SketchPlugin_CurveFitting::TYPE_ID())
886 ->setValue(SketchPlugin_CurveFitting::TYPE_INTERPOLATION_ID());
887 return buildInterpolation(aSketch, anInterpFeature, points, periodic, closed);
890 std::shared_ptr<SketchAPI_BSpline> SketchAPI_Sketch::addApproximation(
891 const std::list<ModelHighAPI_RefAttr>& points,
892 const ModelHighAPI_Double& precision,
896 CompositeFeaturePtr aSketch = compositeFeature();
897 FeaturePtr anInterpFeature = aSketch->addFeature(SketchPlugin_CurveFitting::ID());
898 anInterpFeature->string(SketchPlugin_CurveFitting::TYPE_ID())
899 ->setValue(SketchPlugin_CurveFitting::TYPE_APPROXIMATION_ID());
900 fillAttribute(precision, anInterpFeature->real(SketchPlugin_CurveFitting::PRECISION_ID()));
901 return buildInterpolation(aSketch, anInterpFeature, points, periodic, closed);
904 //--------------------------------------------------------------------------------------
905 std::shared_ptr<SketchAPI_Projection> SketchAPI_Sketch::addProjection(
906 const ModelHighAPI_Selection & theExternalFeature,
908 bool keepRefToOriginal)
910 std::shared_ptr<ModelAPI_Feature> aFeature =
911 compositeFeature()->addFeature(SketchPlugin_Projection::ID());
912 ProjectionPtr aProjection(new SketchAPI_Projection(aFeature));
913 aProjection->setIncludeToResult(keepResult);
914 aProjection->setKeepReferenceToOriginal(keepRefToOriginal);
915 aProjection->setExternalFeature(theExternalFeature);
919 //--------------------------------------------------------------------------------------
920 std::shared_ptr<SketchAPI_Mirror> SketchAPI_Sketch::addMirror(
921 const ModelHighAPI_RefAttr & theMirrorLine,
922 const std::list<std::shared_ptr<ModelAPI_Object> > & theObjects)
924 std::shared_ptr<ModelAPI_Feature> aFeature =
925 compositeFeature()->addFeature(SketchPlugin_ConstraintMirror::ID());
926 return MirrorPtr(new SketchAPI_Mirror(aFeature, theMirrorLine, theObjects));
929 //--------------------------------------------------------------------------------------
930 std::shared_ptr<SketchAPI_Offset> SketchAPI_Sketch::addOffset(
931 const std::list<std::shared_ptr<ModelAPI_Object> > & theObjects,
932 const ModelHighAPI_Double & theValue,
933 const bool theReversed,
934 const std::string & theJointType,
935 const bool theApprox)
937 std::shared_ptr<ModelAPI_Feature> aFeature =
938 compositeFeature()->addFeature(SketchPlugin_Offset::ID());
939 return OffsetPtr(new SketchAPI_Offset(aFeature, theObjects, theValue, theReversed, theJointType, theApprox));
942 //--------------------------------------------------------------------------------------
943 std::shared_ptr<SketchAPI_Translation> SketchAPI_Sketch::addTranslation(
944 const std::list<std::shared_ptr<ModelAPI_Object> > & theObjects,
945 const ModelHighAPI_RefAttr & thePoint1,
946 const ModelHighAPI_RefAttr & thePoint2,
947 const ModelHighAPI_Integer & theNumberOfObjects,
950 std::shared_ptr<ModelAPI_Feature> aFeature =
951 compositeFeature()->addFeature(SketchPlugin_MultiTranslation::ID());
952 return TranslationPtr(new SketchAPI_Translation(aFeature, theObjects, thePoint1,
953 thePoint2, theNumberOfObjects, theFullValue));
956 //--------------------------------------------------------------------------------------
957 std::shared_ptr<SketchAPI_Rotation> SketchAPI_Sketch::addRotation(
958 const std::list<std::shared_ptr<ModelAPI_Object> > & theObjects,
959 const ModelHighAPI_RefAttr & theCenter,
960 const ModelHighAPI_Double & theAngle,
961 const ModelHighAPI_Integer & theNumberOfObjects,
965 std::shared_ptr<ModelAPI_Feature> aFeature =
966 compositeFeature()->addFeature(SketchPlugin_MultiRotation::ID());
968 new SketchAPI_Rotation(aFeature, theObjects, theCenter,
969 theAngle, theNumberOfObjects, theFullValue, theReversed));
972 //--------------------------------------------------------------------------------------
973 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::addSplit(
974 const ModelHighAPI_Reference& theFeature,
975 const std::shared_ptr<GeomAPI_Pnt2d>& thePositionPoint)
977 std::shared_ptr<ModelAPI_Feature> aFeature =
978 compositeFeature()->addFeature(SketchPlugin_Split::ID());
979 fillAttribute(theFeature, aFeature->reference(SketchPlugin_Split::SELECTED_OBJECT()));
981 AttributePtr anAttribute = aFeature->attribute(SketchPlugin_Split::SELECTED_POINT());
982 if (anAttribute->attributeType() == GeomDataAPI_Point2D::typeId()) {
983 AttributePoint2DPtr aPointAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(anAttribute);
984 fillAttribute(thePositionPoint, aPointAttr);
987 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
990 //--------------------------------------------------------------------------------------
991 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::addTrim(
992 const ModelHighAPI_Reference& theFeature,
993 const std::shared_ptr<GeomAPI_Pnt2d>& thePositionPoint)
995 std::shared_ptr<ModelAPI_Feature> aFeature =
996 compositeFeature()->addFeature(SketchPlugin_Trim::ID());
997 fillAttribute(theFeature, aFeature->reference(SketchPlugin_Trim::SELECTED_OBJECT()));
999 AttributePtr anAttribute = aFeature->attribute(SketchPlugin_Trim::SELECTED_POINT());
1000 if (anAttribute->attributeType() == GeomDataAPI_Point2D::typeId()) {
1001 AttributePoint2DPtr aPointAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(anAttribute);
1002 fillAttribute(thePositionPoint, aPointAttr);
1005 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1008 //--------------------------------------------------------------------------------------
1009 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setAngle(
1010 const ModelHighAPI_RefAttr & theLine1,
1011 const ModelHighAPI_RefAttr & theLine2,
1012 const ModelHighAPI_Double & theValue,
1013 const std::string& theType)
1015 std::shared_ptr<ModelAPI_Feature> aFeature =
1016 compositeFeature()->addFeature(SketchPlugin_ConstraintAngle::ID());
1018 const int aVersion = theType.empty() ? SketchPlugin_ConstraintAngle::THE_VERSION_0
1019 : SketchPlugin_ConstraintAngle::THE_VERSION_1;
1020 fillAttribute(aVersion, aFeature->integer(SketchPlugin_ConstraintAngle::VERSION_ID()));
1022 int aType = (int)SketcherPrs_Tools::ANGLE_DIRECT;
1023 fillAttribute(aType, aFeature->integer(SketchPlugin_ConstraintAngle::PREV_TYPE_ID()));
1024 fillAttribute(aType, aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
1026 if (aVersion == SketchPlugin_ConstraintAngle::THE_VERSION_0)
1027 fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
1029 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1030 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1032 if (aVersion == SketchPlugin_ConstraintAngle::THE_VERSION_1) {
1033 std::string aTypeLC = theType;
1034 std::transform(aTypeLC.begin(), aTypeLC.end(), aTypeLC.begin(),
1035 [](char c) { return static_cast<char>(::tolower(c)); });
1036 if (aTypeLC == "supplementary")
1037 aType = (int)SketcherPrs_Tools::ANGLE_COMPLEMENTARY;
1038 else if (aTypeLC == "backward")
1039 aType = (int)SketcherPrs_Tools::ANGLE_BACKWARD;
1041 fillAttribute(aType, aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
1042 fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
1045 aFeature->execute();
1046 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1049 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setAngleComplementary(
1050 const ModelHighAPI_RefAttr & theLine1,
1051 const ModelHighAPI_RefAttr & theLine2,
1052 const ModelHighAPI_Double & theValue)
1054 std::shared_ptr<ModelAPI_Feature> aFeature =
1055 compositeFeature()->addFeature(SketchPlugin_ConstraintAngle::ID());
1056 fillAttribute(SketchPlugin_ConstraintAngle::THE_VERSION_0,
1057 aFeature->integer(SketchPlugin_ConstraintAngle::VERSION_ID()));
1058 fillAttribute(SketcherPrs_Tools::ANGLE_COMPLEMENTARY,
1059 aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
1060 fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
1061 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1062 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1063 aFeature->execute();
1064 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1067 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setAngleBackward(
1068 const ModelHighAPI_RefAttr & theLine1,
1069 const ModelHighAPI_RefAttr & theLine2,
1070 const ModelHighAPI_Double & theValue)
1072 std::shared_ptr<ModelAPI_Feature> aFeature =
1073 compositeFeature()->addFeature(SketchPlugin_ConstraintAngle::ID());
1074 fillAttribute(SketchPlugin_ConstraintAngle::THE_VERSION_0,
1075 aFeature->integer(SketchPlugin_ConstraintAngle::VERSION_ID()));
1076 fillAttribute(SketcherPrs_Tools::ANGLE_BACKWARD,
1077 aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
1078 fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
1079 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1080 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1081 aFeature->execute();
1082 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1085 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setCoincident(
1086 const ModelHighAPI_RefAttr & thePoint1,
1087 const ModelHighAPI_RefAttr & thePoint2)
1089 std::shared_ptr<ModelAPI_Feature> aFeature =
1090 compositeFeature()->addFeature(SketchPlugin_ConstraintCoincidence::ID());
1091 fillAttribute(thePoint1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1092 fillAttribute(thePoint2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1093 aFeature->execute();
1094 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1097 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setCollinear(
1098 const ModelHighAPI_RefAttr & theLine1,
1099 const ModelHighAPI_RefAttr & theLine2)
1101 std::shared_ptr<ModelAPI_Feature> aFeature =
1102 compositeFeature()->addFeature(SketchPlugin_ConstraintCollinear::ID());
1103 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1104 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1105 aFeature->execute();
1106 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1109 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setDistance(
1110 const ModelHighAPI_RefAttr & thePoint,
1111 const ModelHighAPI_RefAttr & thePointOrLine,
1112 const ModelHighAPI_Double & theValue,
1115 std::shared_ptr<ModelAPI_Feature> aFeature =
1116 compositeFeature()->addFeature(SketchPlugin_ConstraintDistance::ID());
1117 fillAttribute(thePoint, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1118 fillAttribute(thePointOrLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1119 fillAttribute(theValue, aFeature->real(SketchPlugin_Constraint::VALUE()));
1120 fillAttribute(isSigned, aFeature->boolean(SketchPlugin_ConstraintDistance::SIGNED()));
1121 aFeature->execute();
1122 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1125 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setSignedDistance(
1126 const ModelHighAPI_RefAttr & thePoint,
1127 const ModelHighAPI_RefAttr & thePointOrLine,
1128 const ModelHighAPI_Double & theValue)
1130 return setDistance(thePoint, thePointOrLine, theValue, true);
1133 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setUnsignedDistance(
1134 const ModelHighAPI_RefAttr & thePoint,
1135 const ModelHighAPI_RefAttr & thePointOrLine,
1136 const ModelHighAPI_Double & theValue)
1138 return setDistance(thePoint, thePointOrLine, theValue, false);
1141 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setHorizontalDistance(
1142 const ModelHighAPI_RefAttr & thePoint1,
1143 const ModelHighAPI_RefAttr & thePoint2,
1144 const ModelHighAPI_Double & theValue)
1146 std::shared_ptr<ModelAPI_Feature> aFeature =
1147 compositeFeature()->addFeature(SketchPlugin_ConstraintDistanceHorizontal::ID());
1148 fillAttribute(thePoint1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1149 fillAttribute(thePoint2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1150 fillAttribute(theValue,
1151 aFeature->real(SketchPlugin_ConstraintDistanceAlongDir::DISTANCE_VALUE_ID()));
1152 aFeature->execute();
1153 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1156 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setVerticalDistance(
1157 const ModelHighAPI_RefAttr & thePoint1,
1158 const ModelHighAPI_RefAttr & thePoint2,
1159 const ModelHighAPI_Double & theValue)
1161 std::shared_ptr<ModelAPI_Feature> aFeature =
1162 compositeFeature()->addFeature(SketchPlugin_ConstraintDistanceVertical::ID());
1163 fillAttribute(thePoint1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1164 fillAttribute(thePoint2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1165 fillAttribute(theValue,
1166 aFeature->real(SketchPlugin_ConstraintDistanceAlongDir::DISTANCE_VALUE_ID()));
1167 aFeature->execute();
1168 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1171 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setEqual(
1172 const ModelHighAPI_RefAttr & theObject1,
1173 const ModelHighAPI_RefAttr & theObject2)
1175 std::shared_ptr<ModelAPI_Feature> aFeature =
1176 compositeFeature()->addFeature(SketchPlugin_ConstraintEqual::ID());
1177 fillAttribute(theObject1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1178 fillAttribute(theObject2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1179 aFeature->execute();
1180 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1183 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setFillet(
1184 const ModelHighAPI_RefAttr & thePoint)
1186 std::shared_ptr<ModelAPI_Feature> aFeature =
1187 compositeFeature()->addFeature(SketchPlugin_Fillet::ID());
1188 fillAttribute(thePoint, aFeature->data()->refattr(SketchPlugin_Fillet::FILLET_POINT_ID()));
1189 apply(); // finish operation to remove Fillet feature correcly
1190 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1193 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setFilletWithRadius(
1194 const ModelHighAPI_RefAttr & thePoint,
1195 const ModelHighAPI_Double & theRadius)
1197 CompositeFeaturePtr aSketch = compositeFeature();
1198 int aNbSubs = aSketch->numberOfSubs();
1201 InterfacePtr aFilletFeature = setFillet(thePoint);
1203 // set radius for just created arc
1204 FeaturePtr anArc = aSketch->subFeature(aNbSubs - 1);
1205 if (anArc->getKind() == SketchPlugin_Arc::ID())
1206 setRadius(ModelHighAPI_RefAttr(ObjectPtr(anArc->lastResult())), ModelHighAPI_Double(theRadius));
1208 return aFilletFeature;
1211 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setFixed(
1212 const ModelHighAPI_RefAttr & theObject)
1214 std::shared_ptr<ModelAPI_Feature> aFeature =
1215 compositeFeature()->addFeature(SketchPlugin_ConstraintRigid::ID());
1216 fillAttribute(theObject, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1217 aFeature->execute();
1218 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1221 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setHorizontal(
1222 const ModelHighAPI_RefAttr & theLine)
1224 std::shared_ptr<ModelAPI_Feature> aFeature =
1225 compositeFeature()->addFeature(SketchPlugin_ConstraintHorizontal::ID());
1226 fillAttribute(theLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1227 aFeature->execute();
1228 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1231 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setLength(
1232 const ModelHighAPI_RefAttr & theLine,
1233 const ModelHighAPI_Double & theValue)
1235 std::shared_ptr<ModelAPI_Feature> aFeature =
1236 compositeFeature()->addFeature(SketchPlugin_ConstraintLength::ID());
1237 fillAttribute(theLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1238 fillAttribute(theValue, aFeature->real(SketchPlugin_Constraint::VALUE()));
1239 aFeature->execute();
1240 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1243 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setMiddlePoint(
1244 const ModelHighAPI_RefAttr & thePoint,
1245 const ModelHighAPI_RefAttr & theLine)
1247 std::shared_ptr<ModelAPI_Feature> aFeature =
1248 compositeFeature()->addFeature(SketchPlugin_ConstraintMiddle::ID());
1249 fillAttribute(thePoint, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1250 fillAttribute(theLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1251 aFeature->execute();
1252 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1255 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setParallel(
1256 const ModelHighAPI_RefAttr & theLine1,
1257 const ModelHighAPI_RefAttr & theLine2)
1259 std::shared_ptr<ModelAPI_Feature> aFeature =
1260 compositeFeature()->addFeature(SketchPlugin_ConstraintParallel::ID());
1261 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1262 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1263 aFeature->execute();
1264 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1267 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setPerpendicular(
1268 const ModelHighAPI_RefAttr & theLine1,
1269 const ModelHighAPI_RefAttr & theLine2)
1271 std::shared_ptr<ModelAPI_Feature> aFeature =
1272 compositeFeature()->addFeature(SketchPlugin_ConstraintPerpendicular::ID());
1273 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1274 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1275 aFeature->execute();
1276 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1279 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setRadius(
1280 const ModelHighAPI_RefAttr & theCircleOrArc,
1281 const ModelHighAPI_Double & theValue)
1283 std::shared_ptr<ModelAPI_Feature> aFeature =
1284 compositeFeature()->addFeature(SketchPlugin_ConstraintRadius::ID());
1285 fillAttribute(theCircleOrArc, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1286 fillAttribute(theValue, aFeature->real(SketchPlugin_Constraint::VALUE()));
1287 aFeature->execute();
1288 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1291 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setTangent(
1292 const ModelHighAPI_RefAttr & theLine,
1293 const ModelHighAPI_RefAttr & theCircle)
1295 std::shared_ptr<ModelAPI_Feature> aFeature =
1296 compositeFeature()->addFeature(SketchPlugin_ConstraintTangent::ID());
1297 fillAttribute(theLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1298 fillAttribute(theCircle, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1299 aFeature->execute();
1300 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1303 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setVertical(
1304 const ModelHighAPI_RefAttr & theLine)
1306 std::shared_ptr<ModelAPI_Feature> aFeature =
1307 compositeFeature()->addFeature(SketchPlugin_ConstraintVertical::ID());
1308 fillAttribute(theLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1309 aFeature->execute();
1310 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1313 //--------------------------------------------------------------------------------------
1315 static std::shared_ptr<GeomAPI_Pnt2d> pointCoordinates(const AttributePtr& thePoint)
1317 AttributePoint2DPtr aPnt = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(thePoint);
1318 return aPnt ? aPnt->pnt() : std::shared_ptr<GeomAPI_Pnt2d>();
1321 static std::shared_ptr<GeomAPI_Pnt2d> middlePointOnLine(const FeaturePtr& theFeature)
1323 AttributePoint2DPtr aStartAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
1324 theFeature->attribute(SketchPlugin_Line::START_ID()));
1325 AttributePoint2DPtr aEndAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
1326 theFeature->attribute(SketchPlugin_Line::END_ID()));
1328 if (!aStartAttr || !aEndAttr)
1329 return std::shared_ptr<GeomAPI_Pnt2d>();
1331 std::shared_ptr<GeomAPI_XY> aStartPoint = aStartAttr->pnt()->xy();
1332 std::shared_ptr<GeomAPI_XY> aEndPoint = aEndAttr->pnt()->xy();
1333 return std::shared_ptr<GeomAPI_Pnt2d>(
1334 new GeomAPI_Pnt2d(aStartPoint->added(aEndPoint)->multiplied(0.5)));
1337 static std::shared_ptr<GeomAPI_Pnt2d> pointOnCircle(const FeaturePtr& theFeature)
1339 AttributePoint2DPtr aCenter = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
1340 theFeature->attribute(SketchPlugin_Circle::CENTER_ID()));
1341 AttributeDoublePtr aRadius = theFeature->real(SketchPlugin_Circle::RADIUS_ID());
1343 if (!aCenter || !aRadius)
1344 return std::shared_ptr<GeomAPI_Pnt2d>();
1346 return std::shared_ptr<GeomAPI_Pnt2d>(
1347 new GeomAPI_Pnt2d(aCenter->x() + aRadius->value(), aCenter->y()));
1350 static std::shared_ptr<GeomAPI_Pnt2d> middlePointOnArc(const FeaturePtr& theFeature)
1352 static const double PI = 3.141592653589793238463;
1354 AttributePoint2DPtr aCenterAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
1355 theFeature->attribute(SketchPlugin_Arc::CENTER_ID()));
1356 AttributePoint2DPtr aStartAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
1357 theFeature->attribute(SketchPlugin_Arc::START_ID()));
1358 AttributePoint2DPtr aEndAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
1359 theFeature->attribute(SketchPlugin_Arc::END_ID()));
1361 if (!aCenterAttr || !aStartAttr || !aEndAttr)
1362 return std::shared_ptr<GeomAPI_Pnt2d>();
1364 std::shared_ptr<GeomAPI_Dir2d> aStartDir(new GeomAPI_Dir2d(
1365 aStartAttr->x() - aCenterAttr->x(), aStartAttr->y() - aCenterAttr->y()));
1366 std::shared_ptr<GeomAPI_Dir2d> aEndDir(new GeomAPI_Dir2d(
1367 aEndAttr->x() - aCenterAttr->x(), aEndAttr->y() - aCenterAttr->y()));
1369 double anAngle = aStartDir->angle(aEndDir);
1370 bool isReversed = theFeature->boolean(SketchPlugin_Arc::REVERSED_ID())->value();
1371 if (isReversed && anAngle > 0.)
1372 anAngle -= 2.0 * PI;
1373 else if (!isReversed && anAngle <= 0.)
1374 anAngle += 2.0 * PI;
1376 double cosA = cos(anAngle);
1377 double sinA = sin(anAngle);
1379 // rotate start dir to find middle point on arc
1380 double aRadius = aStartAttr->pnt()->distance(aCenterAttr->pnt());
1381 double x = aCenterAttr->x() + aRadius * (aStartDir->x() * cosA - aStartDir->y() * sinA);
1382 double y = aCenterAttr->y() + aRadius * (aStartDir->x() * sinA + aStartDir->y() * cosA);
1384 return std::shared_ptr<GeomAPI_Pnt2d>(new GeomAPI_Pnt2d(x, y));
1387 static std::shared_ptr<GeomAPI_Pnt2d> pointOnEllipse(const FeaturePtr& theFeature,
1388 bool isEllipse = true)
1390 const std::string& anAttrName = isEllipse ? SketchPlugin_Ellipse::MAJOR_AXIS_END_ID() :
1391 SketchPlugin_EllipticArc::MAJOR_AXIS_END_ID();
1392 AttributePoint2DPtr aMajorAxisEnd = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
1393 theFeature->attribute(anAttrName));
1394 return aMajorAxisEnd ? aMajorAxisEnd->pnt() : std::shared_ptr<GeomAPI_Pnt2d>();
1397 static std::shared_ptr<GeomAPI_Pnt2d> middlePointOnBSpline(const FeaturePtr& theFeature,
1398 SketchAPI_Sketch* theSketch)
1400 GeomAPI_Edge anEdge(theFeature->lastResult()->shape());
1401 GeomPointPtr aMiddle = anEdge.middlePoint();
1402 return theSketch->to2D(aMiddle);
1405 static std::shared_ptr<GeomAPI_Pnt2d> middlePoint(const ObjectPtr& theObject,
1406 SketchAPI_Sketch* theSketch)
1408 std::shared_ptr<GeomAPI_Pnt2d> aMiddlePoint;
1409 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
1411 // move only features of the following types
1412 const std::string& aFeatureKind = aFeature->getKind();
1413 if (aFeatureKind == SketchPlugin_Point::ID())
1414 aMiddlePoint = pointCoordinates(aFeature->attribute(SketchPlugin_Point::COORD_ID()));
1415 else if (aFeatureKind == SketchPlugin_Line::ID())
1416 aMiddlePoint = middlePointOnLine(aFeature);
1417 else if (aFeatureKind == SketchPlugin_Circle::ID())
1418 aMiddlePoint = pointOnCircle(aFeature);
1419 else if (aFeatureKind == SketchPlugin_Arc::ID())
1420 aMiddlePoint = middlePointOnArc(aFeature);
1421 else if (aFeatureKind == SketchPlugin_Ellipse::ID())
1422 aMiddlePoint = pointOnEllipse(aFeature);
1423 else if (aFeatureKind == SketchPlugin_EllipticArc::ID())
1424 aMiddlePoint = pointOnEllipse(aFeature, false);
1425 else if (aFeatureKind == SketchPlugin_BSpline::ID() ||
1426 aFeatureKind == SketchPlugin_BSplinePeriodic::ID())
1427 aMiddlePoint = middlePointOnBSpline(aFeature, theSketch);
1429 return aMiddlePoint;
1432 void SketchAPI_Sketch::move(const ModelHighAPI_RefAttr& theMovedEntity,
1433 const std::shared_ptr<GeomAPI_Pnt2d>& theTargetPoint)
1435 std::shared_ptr<ModelAPI_ObjectMovedMessage> aMessage(new ModelAPI_ObjectMovedMessage);
1436 theMovedEntity.fillMessage(aMessage);
1438 std::shared_ptr<GeomAPI_Pnt2d> anOriginalPosition;
1439 if (aMessage->movedAttribute())
1440 anOriginalPosition = pointCoordinates(aMessage->movedAttribute());
1442 anOriginalPosition = middlePoint(aMessage->movedObject(), this);
1444 if (!anOriginalPosition)
1445 return; // something has gone wrong, do not process movement
1447 aMessage->setOriginalPosition(anOriginalPosition);
1448 aMessage->setCurrentPosition(theTargetPoint);
1449 Events_Loop::loop()->send(aMessage);
1452 void SketchAPI_Sketch::move(const ModelHighAPI_RefAttr& theMovedEntity,
1453 double theTargetX, double theTargetY)
1455 std::shared_ptr<GeomAPI_Pnt2d> aTargetPoint(new GeomAPI_Pnt2d(theTargetX, theTargetY));
1456 move(theMovedEntity, aTargetPoint);
1459 //--------------------------------------------------------------------------------------
1461 std::shared_ptr<GeomAPI_Pnt2d> SketchAPI_Sketch::to2D(const std::shared_ptr<GeomAPI_Pnt>& thePoint)
1463 FeaturePtr aBase = feature();
1464 std::shared_ptr<GeomDataAPI_Point> aC = std::dynamic_pointer_cast<GeomDataAPI_Point>(
1465 aBase->attribute(SketchPlugin_Sketch::ORIGIN_ID()));
1466 std::shared_ptr<GeomDataAPI_Dir> aNorm = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
1467 aBase->attribute(SketchPlugin_Sketch::NORM_ID()));
1468 std::shared_ptr<GeomDataAPI_Dir> aX = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
1469 aBase->attribute(SketchPlugin_Sketch::DIRX_ID()));
1470 std::shared_ptr<GeomAPI_Dir> aY(new GeomAPI_Dir(aNorm->dir()->cross(aX->dir())));
1472 return thePoint->to2D(aC->pnt(), aX->dir(), aY);
1475 //--------------------------------------------------------------------------------------
1477 static bool isDifferent(GeomFacePtr theFace1, GeomFacePtr theFace2)
1479 // collect edges of the first face
1480 std::list<GeomShapePtr> anEdges1;
1481 for (GeomAPI_ShapeExplorer anExp(theFace1, GeomAPI_Shape::EDGE); anExp.more(); anExp.next())
1482 anEdges1.push_back(anExp.current());
1483 // compare edges of faces
1484 for (GeomAPI_ShapeExplorer anExp(theFace2, GeomAPI_Shape::EDGE); anExp.more(); anExp.next()) {
1485 GeomShapePtr aCurrent = anExp.current();
1486 bool isFound = false;
1487 std::list<GeomShapePtr>::iterator anIt1 = anEdges1.begin();
1488 for (; anIt1 != anEdges1.end(); ++anIt1)
1489 if (aCurrent->isSameGeometry(*anIt1)) {
1491 anEdges1.erase(anIt1);
1497 return !anEdges1.empty();
1500 static bool isCustomFacesOrder(CompositeFeaturePtr theSketch)
1502 ResultConstructionPtr aSketchResult =
1503 std::dynamic_pointer_cast<ModelAPI_ResultConstruction>(theSketch->lastResult());
1507 std::shared_ptr<GeomAPI_PlanarEdges> aWires =
1508 std::dynamic_pointer_cast<GeomAPI_PlanarEdges>(aSketchResult->shape());
1512 // collect faces constructed by SketchBuilder algorithm
1513 GeomAlgoAPI_SketchBuilder aSketchBuilder(aWires->origin(), aWires->dirX(),
1514 aWires->norm(), aWires);
1515 const ListOfShape& aFaces = aSketchBuilder.faces();
1517 // compare faces stored in sketch with faces generated by SketchBuilder
1518 int aNbSketchFaces = aSketchResult->facesNum();
1520 for (ListOfShape::const_iterator aFIt = aFaces.begin();
1521 aFIt != aFaces.end() && aFaceIndex < aNbSketchFaces;
1522 ++aFIt, ++aFaceIndex) {
1523 GeomFacePtr aSketchFace = aSketchResult->face(aFaceIndex);
1524 GeomFacePtr aCurFace = (*aFIt)->face();
1525 if (isDifferent(aSketchFace, aCurFace))
1531 static void edgesOfSketchFaces(CompositeFeaturePtr theSketch,
1532 std::list<std::list<ResultPtr> >& theEdges)
1534 ResultConstructionPtr aSketchResult =
1535 std::dynamic_pointer_cast<ModelAPI_ResultConstruction>(theSketch->lastResult());
1539 // collect curves of the sketch
1540 std::map<GeomCurvePtr, ResultPtr, GeomAPI_Curve::Comparator> aCurves;
1541 int aSubNum = theSketch->numberOfSubs();
1542 for (int a = 0; a < aSubNum; ++a) {
1543 FeaturePtr aSub = theSketch->subFeature(a);
1544 const std::list<ResultPtr>& aResults = aSub->results();
1545 std::list<ResultPtr>::const_iterator aRes = aResults.cbegin();
1546 for (; aRes != aResults.cend(); aRes++) {
1547 GeomShapePtr aCurShape = (*aRes)->shape();
1548 if (aCurShape && aCurShape->isEdge())
1549 aCurves[untrimmedCurve(aCurShape)] = *aRes;
1553 // convert each face to the list of results of its edges
1554 int aFacesNum = aSketchResult->facesNum();
1555 for (int a = 0; a < aFacesNum; ++a) {
1556 theEdges.push_back(std::list<ResultPtr>());
1557 std::list<ResultPtr>& aCurEdges = theEdges.back();
1559 GeomFacePtr aFace = aSketchResult->face(a);
1560 for (GeomAPI_ShapeExplorer anExp(aFace, GeomAPI_Shape::EDGE);
1561 anExp.more(); anExp.next()) {
1562 GeomCurvePtr aCurrent = untrimmedCurve(anExp.current());
1563 aCurEdges.push_back(aCurves[aCurrent]);
1568 //--------------------------------------------------------------------------------------
1570 void SketchAPI_Sketch::dump(ModelHighAPI_Dumper& theDumper) const
1572 FeaturePtr aBase = feature();
1573 const std::string& aDocName = theDumper.name(aBase->document());
1575 AttributeSelectionPtr anExternal = aBase->selection(SketchPlugin_SketchEntity::EXTERNAL_ID());
1576 if (anExternal->value()) {
1577 theDumper << aBase << " = model.addSketch(" << aDocName <<
1578 ", " << anExternal << ")" << std::endl;
1580 // Sketch is base on a plane.
1581 std::shared_ptr<GeomAPI_Pnt> anOrigin = std::dynamic_pointer_cast<GeomDataAPI_Point>(
1582 aBase->attribute(SketchPlugin_Sketch::ORIGIN_ID()))->pnt();
1583 std::shared_ptr<GeomAPI_Dir> aNormal = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
1584 aBase->attribute(SketchPlugin_Sketch::NORM_ID()))->dir();
1585 std::shared_ptr<GeomAPI_Dir> aDirX = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
1586 aBase->attribute(SketchPlugin_Sketch::DIRX_ID()))->dir();
1588 // Check the plane is coordinate plane
1589 std::wstring aPlaneName = defaultPlane(anOrigin, aNormal, aDirX);
1590 if(anExternal->context()) { // checking for selected planes
1591 if (!aPlaneName.empty()
1592 && anExternal->context()->data()
1593 && anExternal->context()->data()->name() == aPlaneName) {
1594 // dump sketch based on coordinate plane
1595 theDumper << aBase << " = model.addSketch(" << aDocName
1596 << ", model.standardPlane(\"" << aPlaneName << "\"))" << std::endl;
1597 } else { // some other plane
1598 theDumper << aBase << " = model.addSketch(" << aDocName <<
1599 ", " << anExternal<< ")" << std::endl;
1602 if (aPlaneName.empty()) {
1603 // needs import additional module
1604 theDumper.importModule("GeomAPI");
1605 // dump plane parameters
1606 const std::string& aSketchName = theDumper.name(aBase);
1607 std::string anOriginName = aSketchName + "_origin";
1608 std::string aNormalName = aSketchName + "_norm";
1609 std::string aDirXName = aSketchName + "_dirx";
1610 // use "\n" instead of std::endl to avoid automatic dumping sketch here
1611 // and then dumplicate dumping it in the next line
1612 theDumper << anOriginName << " = " << anOrigin << "\n"
1613 << aNormalName << " = " << aNormal << "\n"
1614 << aDirXName << " = " << aDirX << "\n";
1615 // dump sketch based on arbitrary plane
1616 theDumper << aBase << " = model.addSketch(" << aDocName << ", GeomAPI_Ax3("
1617 << anOriginName << ", " << aDirXName << ", " << aNormalName << "))" << std::endl;
1619 // dump sketch based on coordinate plane
1620 theDumper << aBase << " = model.addSketch(" << aDocName
1621 << ", model.defaultPlane(\"" << aPlaneName << "\"))" << std::endl;
1626 // dump sketch's subfeatures
1627 CompositeFeaturePtr aCompFeat = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(aBase);
1628 theDumper.processSubs(aCompFeat, true);
1630 // if face order differs to the order generated by SketchBuilder,
1631 // dump the list of faces for correct execution of the script
1632 if (isCustomFacesOrder(aCompFeat)) {
1633 std::list<std::list<ResultPtr> > aFaces;
1634 edgesOfSketchFaces(aCompFeat, aFaces);
1636 const std::string& aSketchName = theDumper.name(aBase);
1637 std::string aMethodName(".changeFacesOrder");
1638 std::string aSpaceShift(aSketchName.size() + aMethodName.size(), ' ');
1640 theDumper << aSketchName << aMethodName << "([";
1641 for (std::list<std::list<ResultPtr> >::iterator aFIt = aFaces.begin();
1642 aFIt != aFaces.end(); ++aFIt) {
1643 if (aFIt != aFaces.begin())
1644 theDumper << ",\n" << aSpaceShift << " ";
1647 theDumper << "\n" << aSpaceShift << " ])" << std::endl;
1648 // call model.do() for correct update of the document's labels related to the changed faces
1649 theDumper << "model.do()" << std::endl;