1 // Copyright (C) 2014-2020 CEA/DEN, EDF R&D
3 // This library is free software; you can redistribute it and/or
4 // modify it under the terms of the GNU Lesser General Public
5 // License as published by the Free Software Foundation; either
6 // version 2.1 of the License, or (at your option) any later version.
8 // This library is distributed in the hope that it will be useful,
9 // but WITHOUT ANY WARRANTY; without even the implied warranty of
10 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 // Lesser General Public License for more details.
13 // You should have received a copy of the GNU Lesser General Public
14 // License along with this library; if not, write to the Free Software
15 // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 #include "SketchAPI_Sketch.h"
21 //--------------------------------------------------------------------------------------
22 #include <SketchPlugin_Constraint.h>
23 #include <SketchPlugin_ConstraintAngle.h>
24 #include <SketchPlugin_ConstraintCoincidence.h>
25 #include <SketchPlugin_ConstraintCollinear.h>
26 #include <SketchPlugin_ConstraintDistance.h>
27 #include <SketchPlugin_ConstraintDistanceHorizontal.h>
28 #include <SketchPlugin_ConstraintDistanceVertical.h>
29 #include <SketchPlugin_ConstraintEqual.h>
30 #include <SketchPlugin_Fillet.h>
31 #include <SketchPlugin_ConstraintHorizontal.h>
32 #include <SketchPlugin_ConstraintLength.h>
33 #include <SketchPlugin_ConstraintMiddle.h>
34 #include <SketchPlugin_ConstraintMirror.h>
35 #include <SketchPlugin_ConstraintParallel.h>
36 #include <SketchPlugin_ConstraintPerpendicular.h>
37 #include <SketchPlugin_ConstraintRadius.h>
38 #include <SketchPlugin_ConstraintRigid.h>
39 #include <SketchPlugin_CurveFitting.h>
40 #include <SketchPlugin_Trim.h>
41 #include <SketchPlugin_Split.h>
42 #include <SketchPlugin_ConstraintTangent.h>
43 #include <SketchPlugin_ConstraintVertical.h>
44 #include <SketchPlugin_MacroBSpline.h>
45 #include <SketchPlugin_SketchCopy.h>
46 #include <SketchPlugin_Offset.h>
47 #include <SketcherPrs_Tools.h>
48 //--------------------------------------------------------------------------------------
49 #include <ModelAPI_Events.h>
50 #include <ModelAPI_CompositeFeature.h>
51 #include <ModelAPI_ResultConstruction.h>
52 #include <ModelHighAPI_Double.h>
53 #include <ModelHighAPI_Dumper.h>
54 #include <ModelHighAPI_RefAttr.h>
55 #include <ModelHighAPI_Selection.h>
56 #include <ModelHighAPI_Services.h>
57 #include <ModelHighAPI_Tools.h>
58 //--------------------------------------------------------------------------------------
59 #include "SketchAPI_Arc.h"
60 #include "SketchAPI_BSpline.h"
61 #include "SketchAPI_Circle.h"
62 #include "SketchAPI_Ellipse.h"
63 #include "SketchAPI_EllipticArc.h"
64 #include "SketchAPI_IntersectionPoint.h"
65 #include "SketchAPI_Line.h"
66 #include "SketchAPI_MacroArc.h"
67 #include "SketchAPI_MacroCircle.h"
68 #include "SketchAPI_MacroEllipse.h"
69 #include "SketchAPI_MacroEllipticArc.h"
70 #include "SketchAPI_Mirror.h"
71 #include "SketchAPI_Offset.h"
72 #include "SketchAPI_Point.h"
73 #include "SketchAPI_Projection.h"
74 #include "SketchAPI_Rectangle.h"
75 #include "SketchAPI_Rotation.h"
76 #include "SketchAPI_Translation.h"
77 //--------------------------------------------------------------------------------------
78 #include <GeomAPI_Curve.h>
79 #include <GeomAPI_Dir2d.h>
80 #include <GeomAPI_PlanarEdges.h>
81 #include <GeomAPI_ShapeExplorer.h>
82 #include <GeomAPI_XY.h>
83 #include <GeomAlgoAPI_SketchBuilder.h>
87 //--------------------------------------------------------------------------------------
88 SketchAPI_Sketch::SketchAPI_Sketch(
89 const std::shared_ptr<ModelAPI_Feature> & theFeature)
90 : ModelHighAPI_Interface(theFeature)
95 SketchAPI_Sketch::SketchAPI_Sketch(
96 const std::shared_ptr<ModelAPI_Feature> & theFeature,
97 const std::shared_ptr<GeomAPI_Ax3> & thePlane)
98 : ModelHighAPI_Interface(theFeature)
105 SketchAPI_Sketch::SketchAPI_Sketch(
106 const std::shared_ptr<ModelAPI_Feature> & theFeature,
107 const ModelHighAPI_Selection & theExternal)
108 : ModelHighAPI_Interface(theFeature)
111 setExternal(theExternal);
115 SketchAPI_Sketch::SketchAPI_Sketch(
116 const std::shared_ptr<ModelAPI_Feature> & theFeature,
117 std::shared_ptr<ModelAPI_Object> thePlaneObject)
118 : ModelHighAPI_Interface(theFeature)
121 setExternal(thePlaneObject);
125 SketchAPI_Sketch::~SketchAPI_Sketch()
130 //--------------------------------------------------------------------------------------
131 std::shared_ptr<ModelAPI_CompositeFeature> SketchAPI_Sketch::compositeFeature() const
133 return std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(feature());
136 //--------------------------------------------------------------------------------------
137 void SketchAPI_Sketch::setPlane(const std::shared_ptr<GeomAPI_Ax3> & thePlane)
139 fillAttribute(thePlane->origin(), myorigin);
140 fillAttribute(thePlane->dirX(), mydirX);
141 fillAttribute(thePlane->normal(), mynormal);
146 void SketchAPI_Sketch::setPlane(const ModelHighAPI_Selection & thePlane,
147 bool theRemoveExternalDependency)
149 FeaturePtr aSketch = feature();
151 DocumentPtr aDoc = aSketch->document();
152 bool useVisible = false;
153 FeaturePtr aCurFeatureBefore = aDoc->currentFeature(useVisible);
154 aDoc->setCurrentFeature(aSketch, useVisible);
156 if (theRemoveExternalDependency)
157 aSketch->customAction(SketchPlugin_Sketch::ACTION_REMOVE_EXTERNAL());
159 setExternal(thePlane);
161 aDoc->setCurrentFeature(aCurFeatureBefore, useVisible);
164 //--------------------------------------------------------------------------------------
165 void SketchAPI_Sketch::setExternal(const ModelHighAPI_Selection & theExternal)
167 fillAttribute(theExternal, myexternal);
172 void SketchAPI_Sketch::setExternal(std::shared_ptr<ModelAPI_Object> thePlaneObject)
174 ResultPtr aRes = std::dynamic_pointer_cast<ModelAPI_Result>(thePlaneObject);
175 ModelHighAPI_Selection aSel(aRes);
179 //--------------------------------------------------------------------------------------
180 void SketchAPI_Sketch::setValue(
181 const std::shared_ptr<ModelHighAPI_Interface> & theConstraint,
182 const ModelHighAPI_Double & theValue)
184 fillAttribute(theValue, theConstraint->feature()->real(SketchPlugin_Constraint::VALUE()));
186 // theConstraint->execute();
189 //--------------------------------------------------------------------------------------
190 std::list<ModelHighAPI_Selection> SketchAPI_Sketch::selectFace() const
192 const_cast<SketchAPI_Sketch*>(this)->execute();
194 std::list<ModelHighAPI_Selection> aSelectionList;
196 ResultConstructionPtr aResultConstruction =
197 std::dynamic_pointer_cast<ModelAPI_ResultConstruction>(feature()->firstResult());
198 if (aResultConstruction.get() == NULL)
199 return aSelectionList;
201 for (int anIndex = 0; anIndex < aResultConstruction->facesNum(); ++anIndex) {
202 aSelectionList.push_back(
203 ModelHighAPI_Selection(aResultConstruction,
204 aResultConstruction->face(anIndex)));
207 return aSelectionList;
210 //--------------------------------------------------------------------------------------
211 SketchPtr addSketch(const std::shared_ptr<ModelAPI_Document> & thePart,
212 const std::shared_ptr<GeomAPI_Ax3> & thePlane)
214 std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(SketchAPI_Sketch::ID());
215 return SketchPtr(new SketchAPI_Sketch(aFeature, thePlane));
218 SketchPtr addSketch(const std::shared_ptr<ModelAPI_Document> & thePart,
219 const ModelHighAPI_Selection & theExternal)
221 std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(SketchAPI_Sketch::ID());
222 return SketchPtr(new SketchAPI_Sketch(aFeature, theExternal));
225 SketchPtr addSketch(const std::shared_ptr<ModelAPI_Document> & thePart,
226 const std::wstring & theExternalName)
228 std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(SketchAPI_Sketch::ID());
230 new SketchAPI_Sketch(aFeature, ModelHighAPI_Selection("FACE", theExternalName)));
233 SketchPtr addSketch(const std::shared_ptr<ModelAPI_Document> & thePart,
234 std::shared_ptr<ModelAPI_Object> thePlaneObject)
236 std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(SketchAPI_Sketch::ID());
237 return SketchPtr(new SketchAPI_Sketch(aFeature, thePlaneObject));
240 //--------------------------------------------------------------------------------------
241 SketchPtr copySketch(const std::shared_ptr<ModelAPI_Document> & thePart,
242 const SketchPtr & theSketch)
244 FeaturePtr aCopyer = thePart->addFeature(SketchPlugin_SketchCopy::ID());
245 aCopyer->reference(SketchPlugin_SketchCopy::BASE_ID())->setValue(theSketch->feature());
248 FeaturePtr aNewSketch = thePart->nextFeature(aCopyer);
250 // perform removing the macro-feature
251 thePart->removeFeature(aCopyer);
254 return SketchPtr(new SketchAPI_Sketch(aNewSketch));
258 //--------------------------------------------------------------------------------------
259 std::list< std::shared_ptr<SketchAPI_Point> > SketchAPI_Sketch::getFreePoints()
261 std::list< std::shared_ptr<SketchAPI_Point> > aFreePoints;
262 std::list<ResultPtr> aPoints = SketcherPrs_Tools::getFreePoints(compositeFeature());
263 for (std::list<ResultPtr>::iterator anIt = aPoints.begin(); anIt != aPoints.end(); ++anIt) {
264 FeaturePtr aFeature = ModelAPI_Feature::feature(*anIt);
265 PointPtr aPoint(new SketchAPI_Point(aFeature));
266 aFreePoints.push_back(aPoint);
271 //--------------------------------------------------------------------------------------
272 static GeomCurvePtr untrimmedCurve(GeomShapePtr theShape)
274 GeomCurvePtr aCurve(new GeomAPI_Curve(theShape));
275 if (aCurve->isTrimmed())
276 aCurve = aCurve->basisCurve();
280 void SketchAPI_Sketch::changeFacesOrder(
281 const std::list<std::list<ModelHighAPI_Selection> >& theFaces)
283 // collect faces of the sketch
284 ResultConstructionPtr aSketchResult =
285 std::dynamic_pointer_cast<ModelAPI_ResultConstruction>(feature()->lastResult());
286 if (!aSketchResult) {
287 // sketch is nested to a boolean operation, thus, it has no result yet.
288 feature()->execute();
290 std::dynamic_pointer_cast<ModelAPI_ResultConstruction>(feature()->lastResult());
292 std::list<GeomFacePtr> aFaces;
293 int aFacesNum = aSketchResult->facesNum();
294 for (int i = 0; i < aFacesNum; ++i)
295 aFaces.push_back(aSketchResult->face(i));
296 // find new faces order according to the given lists of edges
297 std::list<GeomFacePtr> aNewFacesOrder;
298 std::list<std::list<ModelHighAPI_Selection> >::const_iterator anIt = theFaces.begin();
299 for (; anIt != theFaces.end(); ++anIt) {
300 // find the appropriate face
301 std::list<GeomFacePtr>::iterator aFIt = aFaces.begin();
302 for (; aFIt != aFaces.end(); ++aFIt) {
303 std::list<ModelHighAPI_Selection>::const_iterator aEdgeIt = anIt->begin();
304 GeomAPI_ShapeExplorer aFExp(*aFIt, GeomAPI_Shape::EDGE);
305 for (; aEdgeIt != anIt->end() && aFExp.more(); ++aEdgeIt, aFExp.next()) {
306 ResultPtr aCurRes = aEdgeIt->resultSubShapePair().first;
309 GeomCurvePtr aCurve1 = untrimmedCurve(aCurRes->shape());
310 GeomCurvePtr aCurve2 = untrimmedCurve(aFExp.current());
311 if (!aCurve1->isEqual(aCurve2))
315 if (aEdgeIt == anIt->end() && !aFExp.more()) {
317 aNewFacesOrder.push_back(*aFIt);
323 // place the rest faces at the end of new faces list
325 aNewFacesOrder.insert(aNewFacesOrder.end(), aFaces.begin(), aFaces.end());
326 // update the result of the sketch with the new order of faces
327 aSketchResult->setFacesOrder(aNewFacesOrder);
330 //--------------------------------------------------------------------------------------
331 std::shared_ptr<SketchAPI_Point> SketchAPI_Sketch::addPoint(
332 double theX, double theY)
334 std::shared_ptr<ModelAPI_Feature> aFeature =
335 compositeFeature()->addFeature(SketchPlugin_Point::ID());
336 return PointPtr(new SketchAPI_Point(aFeature, theX, theY));
338 std::shared_ptr<SketchAPI_Point> SketchAPI_Sketch::addPoint(
339 const std::shared_ptr<GeomAPI_Pnt2d> & thePoint)
341 std::shared_ptr<ModelAPI_Feature> aFeature =
342 compositeFeature()->addFeature(SketchPlugin_Point::ID());
343 return PointPtr(new SketchAPI_Point(aFeature, thePoint));
345 std::shared_ptr<SketchAPI_Point>
346 SketchAPI_Sketch::addPoint(const ModelHighAPI_Selection & theExternal)
348 std::shared_ptr<ModelAPI_Feature> aFeature =
349 compositeFeature()->addFeature(SketchPlugin_Point::ID());
350 return PointPtr(new SketchAPI_Point(aFeature, theExternal));
352 std::shared_ptr<SketchAPI_Point> SketchAPI_Sketch::addPoint(const std::wstring & theExternalName)
354 std::shared_ptr<ModelAPI_Feature> aFeature =
355 compositeFeature()->addFeature(SketchPlugin_Point::ID());
356 return PointPtr(new SketchAPI_Point(aFeature, theExternalName));
359 //--------------------------------------------------------------------------------------
360 std::shared_ptr<SketchAPI_IntersectionPoint> SketchAPI_Sketch::addIntersectionPoint(
361 const ModelHighAPI_Selection & theExternal,
364 std::shared_ptr<ModelAPI_Feature> aFeature =
365 compositeFeature()->addFeature(SketchPlugin_IntersectionPoint::ID());
366 IntersectionPointPtr anIntersection(new SketchAPI_IntersectionPoint(aFeature, theExternal));
367 anIntersection->setIncludeToResult(theKeepResult);
368 return anIntersection;
370 std::shared_ptr<SketchAPI_IntersectionPoint> SketchAPI_Sketch::addIntersectionPoint(
371 const std::wstring & theExternalName,
374 std::shared_ptr<ModelAPI_Feature> aFeature =
375 compositeFeature()->addFeature(SketchPlugin_IntersectionPoint::ID());
376 IntersectionPointPtr anIntersection(new SketchAPI_IntersectionPoint(aFeature, theExternalName));
377 anIntersection->setIncludeToResult(theKeepResult);
378 return anIntersection;
381 //--------------------------------------------------------------------------------------
382 std::shared_ptr<SketchAPI_Line> SketchAPI_Sketch::addLine(double theX1, double theY1,
383 double theX2, double theY2)
385 std::shared_ptr<ModelAPI_Feature> aFeature =
386 compositeFeature()->addFeature(SketchPlugin_Line::ID());
387 return LinePtr(new SketchAPI_Line(aFeature, theX1, theY1, theX2, theY2));
389 std::shared_ptr<SketchAPI_Line> SketchAPI_Sketch::addLine(
390 const std::shared_ptr<GeomAPI_Pnt2d> & theStartPoint,
391 const std::shared_ptr<GeomAPI_Pnt2d> & theEndPoint)
393 std::shared_ptr<ModelAPI_Feature> aFeature =
394 compositeFeature()->addFeature(SketchPlugin_Line::ID());
395 return LinePtr(new SketchAPI_Line(aFeature, theStartPoint, theEndPoint));
397 std::shared_ptr<SketchAPI_Line>
398 SketchAPI_Sketch::addLine(const ModelHighAPI_Selection & theExternal)
400 std::shared_ptr<ModelAPI_Feature> aFeature =
401 compositeFeature()->addFeature(SketchPlugin_Line::ID());
402 return LinePtr(new SketchAPI_Line(aFeature, theExternal));
404 std::shared_ptr<SketchAPI_Line> SketchAPI_Sketch::addLine(const std::wstring & theExternalName)
406 std::shared_ptr<ModelAPI_Feature> aFeature =
407 compositeFeature()->addFeature(SketchPlugin_Line::ID());
408 return LinePtr(new SketchAPI_Line(aFeature, theExternalName));
411 //--------------------------------------------------------------------------------------
412 std::shared_ptr<SketchAPI_Rectangle> SketchAPI_Sketch::addRectangle(double theX1, double theY1,
413 double theX2, double theY2)
415 std::shared_ptr<ModelAPI_Feature> aFeature =
416 compositeFeature()->addFeature(SketchAPI_Rectangle::ID());
417 return RectanglePtr(new SketchAPI_Rectangle(aFeature, theX1, theY1, theX2, theY2));
419 std::shared_ptr<SketchAPI_Rectangle> SketchAPI_Sketch::addRectangle(
420 const std::shared_ptr<GeomAPI_Pnt2d> & theStartPoint,
421 const std::shared_ptr<GeomAPI_Pnt2d> & theEndPoint)
423 std::shared_ptr<ModelAPI_Feature> aFeature =
424 compositeFeature()->addFeature(SketchAPI_Rectangle::ID());
425 return RectanglePtr(new SketchAPI_Rectangle(aFeature, theStartPoint, theEndPoint));
428 std::shared_ptr<SketchAPI_Rectangle> SketchAPI_Sketch::addRectangle(
429 double theX1, double theY1, double theX2, double theY2, bool isFirstPointCenter)
431 std::shared_ptr<ModelAPI_Feature> aFeature =
432 compositeFeature()->addFeature(SketchAPI_Rectangle::ID());
433 return RectanglePtr(new SketchAPI_Rectangle(aFeature, theX1, theY1,
434 theX2, theY2, isFirstPointCenter));
436 std::shared_ptr<SketchAPI_Rectangle> SketchAPI_Sketch::addRectangle(
437 const std::shared_ptr<GeomAPI_Pnt2d> & theFirstPoint,
438 const std::shared_ptr<GeomAPI_Pnt2d> & theEndPoint, bool isFirstPointCenter)
440 std::shared_ptr<ModelAPI_Feature> aFeature =
441 compositeFeature()->addFeature(SketchAPI_Rectangle::ID());
442 return RectanglePtr(new SketchAPI_Rectangle(aFeature, theFirstPoint, theEndPoint,
443 isFirstPointCenter));
446 std::shared_ptr<SketchAPI_Rectangle> SketchAPI_Sketch::addRectangleCentered(
447 double theX1, double theY1, double theX2, double theY2)
449 std::shared_ptr<ModelAPI_Feature> aFeature =
450 compositeFeature()->addFeature(SketchAPI_Rectangle::ID());
451 return RectanglePtr(new SketchAPI_Rectangle(aFeature, theX1, theY1, theX2, theY2, true));
453 std::shared_ptr<SketchAPI_Rectangle> SketchAPI_Sketch::addRectangleCentered(
454 const std::shared_ptr<GeomAPI_Pnt2d> & theFirstPoint,
455 const std::shared_ptr<GeomAPI_Pnt2d> & theEndPoint)
457 std::shared_ptr<ModelAPI_Feature> aFeature =
458 compositeFeature()->addFeature(SketchAPI_Rectangle::ID());
459 return RectanglePtr(new SketchAPI_Rectangle(aFeature, theFirstPoint, theEndPoint, true));
462 //--------------------------------------------------------------------------------------
463 std::shared_ptr<SketchAPI_Circle> SketchAPI_Sketch::addCircle(double theCenterX,
467 std::shared_ptr<ModelAPI_Feature> aFeature =
468 compositeFeature()->addFeature(SketchPlugin_Circle::ID());
469 return CirclePtr(new SketchAPI_Circle(aFeature, theCenterX, theCenterY, theRadius));
472 std::shared_ptr<SketchAPI_Circle> SketchAPI_Sketch::addCircle(
473 const std::shared_ptr<GeomAPI_Pnt2d>& theCenter,
476 std::shared_ptr<ModelAPI_Feature> aFeature =
477 compositeFeature()->addFeature(SketchPlugin_Circle::ID());
478 return CirclePtr(new SketchAPI_Circle(aFeature, theCenter, theRadius));
481 std::shared_ptr<SketchAPI_MacroCircle> SketchAPI_Sketch::addCircle(double theCenterX,
486 std::shared_ptr<ModelAPI_Feature> aFeature =
487 compositeFeature()->addFeature(SketchPlugin_MacroCircle::ID());
488 return MacroCirclePtr(new SketchAPI_MacroCircle(aFeature, theCenterX, theCenterY,
489 thePassedX, thePassedY));
492 std::shared_ptr<SketchAPI_MacroCircle> SketchAPI_Sketch::addCircle(
493 const std::shared_ptr<GeomAPI_Pnt2d>& theCenterPoint,
494 const std::shared_ptr<GeomAPI_Pnt2d>& thePassedPoint)
496 std::shared_ptr<ModelAPI_Feature> aFeature =
497 compositeFeature()->addFeature(SketchPlugin_MacroCircle::ID());
498 return MacroCirclePtr(new SketchAPI_MacroCircle(aFeature, theCenterPoint, thePassedPoint));
501 std::shared_ptr<SketchAPI_MacroCircle> SketchAPI_Sketch::addCircle(double theX1, double theY1,
502 double theX2, double theY2,
503 double theX3, double theY3)
505 std::shared_ptr<ModelAPI_Feature> aFeature =
506 compositeFeature()->addFeature(SketchPlugin_MacroCircle::ID());
507 return MacroCirclePtr(new SketchAPI_MacroCircle(aFeature, theX1, theY1,
512 std::shared_ptr<SketchAPI_MacroCircle> SketchAPI_Sketch::addCircle(
513 const std::shared_ptr<GeomAPI_Pnt2d>& thePoint1,
514 const std::shared_ptr<GeomAPI_Pnt2d>& thePoint2,
515 const std::shared_ptr<GeomAPI_Pnt2d>& thePoint3)
517 std::shared_ptr<ModelAPI_Feature> aFeature =
518 compositeFeature()->addFeature(SketchPlugin_MacroCircle::ID());
519 return MacroCirclePtr(new SketchAPI_MacroCircle(aFeature, thePoint1, thePoint2, thePoint3));
522 std::shared_ptr<SketchAPI_Circle>
523 SketchAPI_Sketch::addCircle(const ModelHighAPI_Selection & theExternal)
525 std::shared_ptr<ModelAPI_Feature> aFeature =
526 compositeFeature()->addFeature(SketchPlugin_Circle::ID());
527 return CirclePtr(new SketchAPI_Circle(aFeature, theExternal));
530 std::shared_ptr<SketchAPI_Circle> SketchAPI_Sketch::addCircle(const std::wstring & theExternalName)
532 std::shared_ptr<ModelAPI_Feature> aFeature =
533 compositeFeature()->addFeature(SketchPlugin_Circle::ID());
534 return CirclePtr(new SketchAPI_Circle(aFeature, theExternalName));
537 //--------------------------------------------------------------------------------------
538 std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(double theCenterX, double theCenterY,
539 double theStartX, double theStartY,
540 double theEndX, double theEndY,
543 std::shared_ptr<ModelAPI_Feature> aFeature =
544 compositeFeature()->addFeature(SketchPlugin_Arc::ID());
545 return ArcPtr(new SketchAPI_Arc(aFeature,
546 theCenterX, theCenterY,
547 theStartX, theStartY,
552 std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(
553 const std::shared_ptr<GeomAPI_Pnt2d>& theCenter,
554 const std::shared_ptr<GeomAPI_Pnt2d>& theStart,
555 const std::shared_ptr<GeomAPI_Pnt2d>& theEnd,
558 std::shared_ptr<ModelAPI_Feature> aFeature =
559 compositeFeature()->addFeature(SketchPlugin_Arc::ID());
560 return ArcPtr(new SketchAPI_Arc(aFeature, theCenter, theStart, theEnd, theInversed));
563 std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(double theStartX, double theStartY,
564 double theEndX, double theEndY,
565 double thePassedX, double thePassedY)
567 std::shared_ptr<ModelAPI_Feature> aFeature =
568 compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
569 return MacroArcPtr(new SketchAPI_MacroArc(aFeature,
570 theStartX, theStartY,
572 thePassedX, thePassedY));
575 std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(
576 const std::shared_ptr<GeomAPI_Pnt2d>& theStart,
577 const std::shared_ptr<GeomAPI_Pnt2d>& theEnd,
578 const std::shared_ptr<GeomAPI_Pnt2d>& thePassed)
580 std::shared_ptr<ModelAPI_Feature> aFeature =
581 compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
582 return MacroArcPtr(new SketchAPI_MacroArc(aFeature, theStart, theEnd, thePassed));
585 std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(
586 const ModelHighAPI_RefAttr& theTangentPoint,
587 double theEndX, double theEndY,
591 std::shared_ptr<ModelAPI_Feature> aFeature =
592 compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
593 MacroArcPtr aMacroArc(new SketchAPI_MacroArc(aFeature));
595 aMacroArc->setByTransversal(theTangentPoint, theEndX, theEndY, theInversed);
597 aMacroArc->setByTangent(theTangentPoint, theEndX, theEndY, theInversed);
601 std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(
602 const ModelHighAPI_RefAttr& theTangentPoint,
603 const std::shared_ptr<GeomAPI_Pnt2d>& theEnd,
607 std::shared_ptr<ModelAPI_Feature> aFeature =
608 compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
609 MacroArcPtr aMacroArc(new SketchAPI_MacroArc(aFeature));
611 aMacroArc->setByTransversal(theTangentPoint, theEnd, theInversed);
613 aMacroArc->setByTangent(theTangentPoint, theEnd, theInversed);
617 std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(const ModelHighAPI_Selection & theExternal)
619 std::shared_ptr<ModelAPI_Feature> aFeature =
620 compositeFeature()->addFeature(SketchPlugin_Arc::ID());
621 return ArcPtr(new SketchAPI_Arc(aFeature, theExternal));
624 std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(const std::wstring & theExternalName)
626 std::shared_ptr<ModelAPI_Feature> aFeature =
627 compositeFeature()->addFeature(SketchPlugin_Arc::ID());
628 return ArcPtr(new SketchAPI_Arc(aFeature, theExternalName));
631 //--------------------------------------------------------------------------------------
632 std::shared_ptr<SketchAPI_Ellipse> SketchAPI_Sketch::addEllipse(
633 double theCenterX, double theCenterY,
634 double theFocusX, double theFocusY,
635 double theMinorRadius)
637 std::shared_ptr<ModelAPI_Feature> aFeature =
638 compositeFeature()->addFeature(SketchPlugin_Ellipse::ID());
639 return EllipsePtr(new SketchAPI_Ellipse(aFeature,
640 theCenterX, theCenterY, theFocusX, theFocusY, theMinorRadius));
643 std::shared_ptr<SketchAPI_Ellipse> SketchAPI_Sketch::addEllipse(
644 const std::shared_ptr<GeomAPI_Pnt2d>& theCenter,
645 const std::shared_ptr<GeomAPI_Pnt2d>& theFocus,
646 double theMinorRadius)
648 std::shared_ptr<ModelAPI_Feature> aFeature =
649 compositeFeature()->addFeature(SketchPlugin_Ellipse::ID());
650 return EllipsePtr(new SketchAPI_Ellipse(aFeature, theCenter, theFocus, theMinorRadius));
653 std::shared_ptr<SketchAPI_MacroEllipse> SketchAPI_Sketch::addEllipse(
654 double thePoint1X, double thePoint1Y,
655 double thePoint2X, double thePoint2Y,
656 double thePassedX, double thePassedY,
659 std::shared_ptr<ModelAPI_Feature> aFeature =
660 compositeFeature()->addFeature(SketchPlugin_MacroEllipse::ID());
661 return MacroEllipsePtr(new SketchAPI_MacroEllipse(aFeature,
662 thePoint1X, thePoint1Y, thePoint2X, thePoint2Y, thePassedX, thePassedY, isPoint1Center));
665 std::shared_ptr<SketchAPI_MacroEllipse> SketchAPI_Sketch::addEllipse(
666 const PointOrReference& thePoint1,
667 const PointOrReference& thePoint2,
668 const PointOrReference& thePassedPoint,
671 std::shared_ptr<ModelAPI_Feature> aFeature =
672 compositeFeature()->addFeature(SketchPlugin_MacroEllipse::ID());
673 MacroEllipsePtr anEllipse;
674 if (thePoint1.second.isEmpty() &&
675 thePoint2.second.isEmpty() &&
676 thePassedPoint.second.isEmpty()) {
677 anEllipse.reset(new SketchAPI_MacroEllipse(aFeature,
678 thePoint1.first, thePoint2.first, thePassedPoint.first, isPoint1Center));
681 anEllipse.reset(new SketchAPI_MacroEllipse(aFeature,
682 thePoint1.first, thePoint1.second,
683 thePoint2.first, thePoint2.second,
684 thePassedPoint.first, thePassedPoint.second,
690 std::shared_ptr<SketchAPI_Ellipse> SketchAPI_Sketch::addEllipse(
691 const ModelHighAPI_Selection & theExternal)
693 std::shared_ptr<ModelAPI_Feature> aFeature =
694 compositeFeature()->addFeature(SketchPlugin_Ellipse::ID());
695 return EllipsePtr(new SketchAPI_Ellipse(aFeature, theExternal));
698 std::shared_ptr<SketchAPI_Ellipse> SketchAPI_Sketch::addEllipse(
699 const std::wstring & theExternalName)
701 std::shared_ptr<ModelAPI_Feature> aFeature =
702 compositeFeature()->addFeature(SketchPlugin_Ellipse::ID());
703 return EllipsePtr(new SketchAPI_Ellipse(aFeature, theExternalName));
706 //--------------------------------------------------------------------------------------
707 std::shared_ptr<SketchAPI_EllipticArc> SketchAPI_Sketch::addEllipticArc(
708 double theCenterX, double theCenterY,
709 double theFocusX, double theFocusY,
710 double theStartX, double theStartY,
711 double theEndX, double theEndY,
714 std::shared_ptr<ModelAPI_Feature> aFeature =
715 compositeFeature()->addFeature(SketchPlugin_EllipticArc::ID());
716 return EllipticArcPtr(new SketchAPI_EllipticArc(aFeature,
717 theCenterX, theCenterY,
718 theFocusX, theFocusY,
719 theStartX, theStartY,
724 std::shared_ptr<SketchAPI_MacroEllipticArc> SketchAPI_Sketch::addEllipticArc(
725 const PointOrReference& theCenter,
726 const PointOrReference& theMajorAxisPoint,
727 const PointOrReference& theStartPoint,
728 const PointOrReference& theEndPoint,
731 std::shared_ptr<ModelAPI_Feature> aFeature =
732 compositeFeature()->addFeature(SketchPlugin_MacroEllipticArc::ID());
733 return MacroEllipticArcPtr(new SketchAPI_MacroEllipticArc(aFeature,
734 theCenter.first, theCenter.second,
735 theMajorAxisPoint.first, theMajorAxisPoint.second,
736 theStartPoint.first, theStartPoint.second,
737 theEndPoint.first, theEndPoint.second,
741 std::shared_ptr<SketchAPI_EllipticArc> SketchAPI_Sketch::addEllipticArc(
742 const ModelHighAPI_Selection & theExternal)
744 std::shared_ptr<ModelAPI_Feature> aFeature =
745 compositeFeature()->addFeature(SketchPlugin_EllipticArc::ID());
746 return EllipticArcPtr(new SketchAPI_EllipticArc(aFeature, theExternal));
749 std::shared_ptr<SketchAPI_EllipticArc> SketchAPI_Sketch::addEllipticArc(
750 const std::wstring & theExternalName)
752 std::shared_ptr<ModelAPI_Feature> aFeature =
753 compositeFeature()->addFeature(SketchPlugin_EllipticArc::ID());
754 return EllipticArcPtr(new SketchAPI_EllipticArc(aFeature, theExternalName));
757 //--------------------------------------------------------------------------------------
759 std::shared_ptr<SketchAPI_BSpline> SketchAPI_Sketch::addSpline(
760 const ModelHighAPI_Selection & external,
762 const std::list<PointOrReference>& poles,
763 const std::list<ModelHighAPI_Double>& weights,
764 const std::list<ModelHighAPI_Double>& knots,
765 const std::list<ModelHighAPI_Integer>& multiplicities,
768 // split poles and references to other shapes
769 bool hasReference = false;
770 std::list<GeomPnt2dPtr> aPoints;
771 std::list<ModelHighAPI_RefAttr> aReferences;
772 for (std::list<PointOrReference>::const_iterator it = poles.begin(); it != poles.end(); ++it) {
773 aPoints.push_back(it->first);
774 aReferences.push_back(it->second);
775 if (!it->second.isEmpty())
780 CompositeFeaturePtr aSketch = compositeFeature();
782 // use macro-feature to create coincidences to referred features
783 FeaturePtr aMacroFeature = aSketch->addFeature(
784 periodic ? SketchPlugin_MacroBSplinePeriodic::ID() : SketchPlugin_MacroBSpline::ID());
785 AttributePoint2DArrayPtr aPolesAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2DArray>(
786 aMacroFeature->attribute(SketchPlugin_MacroBSpline::POLES_ID()));
787 AttributeDoubleArrayPtr aWeightsAttr =
788 aMacroFeature->data()->realArray(SketchPlugin_MacroBSpline::WEIGHTS_ID());
789 AttributeRefAttrListPtr aPolesRefAttr =
790 aMacroFeature->data()->refattrlist(SketchPlugin_MacroBSpline::REF_POLES_ID());
791 // always generate a control polygon to apply coincidences correctly
792 aMacroFeature->boolean(SketchPlugin_MacroBSpline::CONTROL_POLYGON_ID())->setValue(true);
793 // initialize B-spline attributes
794 fillAttribute(aPoints, aPolesAttr);
796 fillAttribute(std::list<ModelHighAPI_Double>(poles.size(), 1.0), aWeightsAttr);
798 fillAttribute(weights, aWeightsAttr);
799 fillAttribute(aReferences, aPolesRefAttr);
800 apply(); // to kill macro-feature
802 // find created B-spline feature
803 const std::string& aKindToFind =
804 periodic ? SketchPlugin_BSplinePeriodic::ID() : SketchPlugin_BSpline::ID();
805 int aNbSubs = aSketch->numberOfSubs();
806 for (int anIndex = aNbSubs - 1; anIndex >= 0; --anIndex) {
807 FeaturePtr aFeature = aSketch->subFeature(anIndex);
808 if (aFeature->getKind() == aKindToFind) {
809 aBSpline.reset(periodic ? new SketchAPI_BSplinePeriodic(aFeature)
810 : new SketchAPI_BSpline(aFeature));
817 // compute B-spline by parameters
818 FeaturePtr aFeature = aSketch->addFeature(
819 periodic ? SketchPlugin_BSplinePeriodic::ID() : SketchPlugin_BSpline::ID());
821 aBSpline.reset(periodic ? new SketchAPI_BSplinePeriodic(aFeature)
822 : new SketchAPI_BSpline(aFeature));
823 if (external.variantType() != ModelHighAPI_Selection::VT_Empty)
824 aBSpline->setByExternal(external);
825 else if (knots.empty() || multiplicities.empty())
826 aBSpline->setByDegreePolesAndWeights(degree, aPoints, weights);
828 aBSpline->setByParameters(degree, aPoints, weights, knots, multiplicities);
833 //--------------------------------------------------------------------------------------
834 static std::shared_ptr<SketchAPI_BSpline> buildInterpolation(
835 const CompositeFeaturePtr& theSketch,
836 const FeaturePtr& theCurveFittingFeature,
837 const std::list<ModelHighAPI_RefAttr>& points,
841 AttributeBooleanPtr aPeriodicAttr =
842 theCurveFittingFeature->boolean(SketchPlugin_CurveFitting::PERIODIC_ID());
843 fillAttribute(periodic, aPeriodicAttr);
844 AttributeBooleanPtr aClosedAttr =
845 theCurveFittingFeature->boolean(SketchPlugin_CurveFitting::CLOSED_ID());
846 fillAttribute(closed, aClosedAttr);
847 AttributeRefAttrListPtr aPointsAttr =
848 theCurveFittingFeature->refattrlist(SketchPlugin_CurveFitting::POINTS_ID());
849 fillAttribute(points, aPointsAttr);
850 apply(); // to execute and kill the macro-feature
852 // find created B-spline feature
854 const std::string& aKindToFind =
855 periodic ? SketchPlugin_BSplinePeriodic::ID() : SketchPlugin_BSpline::ID();
856 int aNbSubs = theSketch->numberOfSubs();
857 for (int anIndex = aNbSubs - 1; anIndex >= 0; --anIndex) {
858 FeaturePtr aFeature = theSketch->subFeature(anIndex);
859 if (aFeature->getKind() == aKindToFind) {
860 aBSpline.reset(periodic ? new SketchAPI_BSplinePeriodic(aFeature)
861 : new SketchAPI_BSpline(aFeature));
869 std::shared_ptr<SketchAPI_BSpline> SketchAPI_Sketch::addInterpolation(
870 const std::list<ModelHighAPI_RefAttr>& points,
874 CompositeFeaturePtr aSketch = compositeFeature();
875 FeaturePtr anInterpFeature = aSketch->addFeature(SketchPlugin_CurveFitting::ID());
876 anInterpFeature->string(SketchPlugin_CurveFitting::TYPE_ID())
877 ->setValue(SketchPlugin_CurveFitting::TYPE_INTERPOLATION_ID());
878 return buildInterpolation(aSketch, anInterpFeature, points, periodic, closed);
881 std::shared_ptr<SketchAPI_BSpline> SketchAPI_Sketch::addApproximation(
882 const std::list<ModelHighAPI_RefAttr>& points,
883 const ModelHighAPI_Double& precision,
887 CompositeFeaturePtr aSketch = compositeFeature();
888 FeaturePtr anInterpFeature = aSketch->addFeature(SketchPlugin_CurveFitting::ID());
889 anInterpFeature->string(SketchPlugin_CurveFitting::TYPE_ID())
890 ->setValue(SketchPlugin_CurveFitting::TYPE_APPROXIMATION_ID());
891 fillAttribute(precision, anInterpFeature->real(SketchPlugin_CurveFitting::PRECISION_ID()));
892 return buildInterpolation(aSketch, anInterpFeature, points, periodic, closed);
895 //--------------------------------------------------------------------------------------
896 std::shared_ptr<SketchAPI_Projection> SketchAPI_Sketch::addProjection(
897 const ModelHighAPI_Selection & theExternalFeature,
899 bool keepRefToOriginal)
901 std::shared_ptr<ModelAPI_Feature> aFeature =
902 compositeFeature()->addFeature(SketchPlugin_Projection::ID());
903 ProjectionPtr aProjection(new SketchAPI_Projection(aFeature));
904 aProjection->setIncludeToResult(keepResult);
905 aProjection->setKeepReferenceToOriginal(keepRefToOriginal);
906 aProjection->setExternalFeature(theExternalFeature);
910 //--------------------------------------------------------------------------------------
911 std::shared_ptr<SketchAPI_Mirror> SketchAPI_Sketch::addMirror(
912 const ModelHighAPI_RefAttr & theMirrorLine,
913 const std::list<std::shared_ptr<ModelAPI_Object> > & theObjects)
915 std::shared_ptr<ModelAPI_Feature> aFeature =
916 compositeFeature()->addFeature(SketchPlugin_ConstraintMirror::ID());
917 return MirrorPtr(new SketchAPI_Mirror(aFeature, theMirrorLine, theObjects));
920 //--------------------------------------------------------------------------------------
921 std::shared_ptr<SketchAPI_Offset> SketchAPI_Sketch::addOffset(
922 const std::list<std::shared_ptr<ModelAPI_Object> > & theObjects,
923 const ModelHighAPI_Double & theValue,
924 const bool theReversed)
926 std::shared_ptr<ModelAPI_Feature> aFeature =
927 compositeFeature()->addFeature(SketchPlugin_Offset::ID());
928 return OffsetPtr(new SketchAPI_Offset(aFeature, theObjects, theValue, theReversed));
931 //--------------------------------------------------------------------------------------
932 std::shared_ptr<SketchAPI_Translation> SketchAPI_Sketch::addTranslation(
933 const std::list<std::shared_ptr<ModelAPI_Object> > & theObjects,
934 const ModelHighAPI_RefAttr & thePoint1,
935 const ModelHighAPI_RefAttr & thePoint2,
936 const ModelHighAPI_Integer & theNumberOfObjects,
939 std::shared_ptr<ModelAPI_Feature> aFeature =
940 compositeFeature()->addFeature(SketchPlugin_MultiTranslation::ID());
941 return TranslationPtr(new SketchAPI_Translation(aFeature, theObjects, thePoint1,
942 thePoint2, theNumberOfObjects, theFullValue));
945 //--------------------------------------------------------------------------------------
946 std::shared_ptr<SketchAPI_Rotation> SketchAPI_Sketch::addRotation(
947 const std::list<std::shared_ptr<ModelAPI_Object> > & theObjects,
948 const ModelHighAPI_RefAttr & theCenter,
949 const ModelHighAPI_Double & theAngle,
950 const ModelHighAPI_Integer & theNumberOfObjects,
954 std::shared_ptr<ModelAPI_Feature> aFeature =
955 compositeFeature()->addFeature(SketchPlugin_MultiRotation::ID());
957 new SketchAPI_Rotation(aFeature, theObjects, theCenter,
958 theAngle, theNumberOfObjects, theFullValue, theReversed));
961 //--------------------------------------------------------------------------------------
962 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::addSplit(
963 const ModelHighAPI_Reference& theFeature,
964 const std::shared_ptr<GeomAPI_Pnt2d>& thePositionPoint)
966 std::shared_ptr<ModelAPI_Feature> aFeature =
967 compositeFeature()->addFeature(SketchPlugin_Split::ID());
968 fillAttribute(theFeature, aFeature->reference(SketchPlugin_Split::SELECTED_OBJECT()));
970 AttributePtr anAttribute = aFeature->attribute(SketchPlugin_Split::SELECTED_POINT());
971 if (anAttribute->attributeType() == GeomDataAPI_Point2D::typeId()) {
972 AttributePoint2DPtr aPointAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(anAttribute);
973 fillAttribute(thePositionPoint, aPointAttr);
976 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
979 //--------------------------------------------------------------------------------------
980 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::addTrim(
981 const ModelHighAPI_Reference& theFeature,
982 const std::shared_ptr<GeomAPI_Pnt2d>& thePositionPoint)
984 std::shared_ptr<ModelAPI_Feature> aFeature =
985 compositeFeature()->addFeature(SketchPlugin_Trim::ID());
986 fillAttribute(theFeature, aFeature->reference(SketchPlugin_Trim::SELECTED_OBJECT()));
988 AttributePtr anAttribute = aFeature->attribute(SketchPlugin_Trim::SELECTED_POINT());
989 if (anAttribute->attributeType() == GeomDataAPI_Point2D::typeId()) {
990 AttributePoint2DPtr aPointAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(anAttribute);
991 fillAttribute(thePositionPoint, aPointAttr);
994 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
997 //--------------------------------------------------------------------------------------
998 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setAngle(
999 const ModelHighAPI_RefAttr & theLine1,
1000 const ModelHighAPI_RefAttr & theLine2,
1001 const ModelHighAPI_Double & theValue,
1002 const std::string& theType)
1004 std::shared_ptr<ModelAPI_Feature> aFeature =
1005 compositeFeature()->addFeature(SketchPlugin_ConstraintAngle::ID());
1007 const int aVersion = theType.empty() ? SketchPlugin_ConstraintAngle::THE_VERSION_0
1008 : SketchPlugin_ConstraintAngle::THE_VERSION_1;
1009 fillAttribute(aVersion, aFeature->integer(SketchPlugin_ConstraintAngle::VERSION_ID()));
1011 int aType = (int)SketcherPrs_Tools::ANGLE_DIRECT;
1012 fillAttribute(aType, aFeature->integer(SketchPlugin_ConstraintAngle::PREV_TYPE_ID()));
1013 fillAttribute(aType, aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
1015 if (aVersion == SketchPlugin_ConstraintAngle::THE_VERSION_0)
1016 fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
1018 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1019 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1021 if (aVersion == SketchPlugin_ConstraintAngle::THE_VERSION_1) {
1022 std::string aTypeLC = theType;
1023 std::transform(aTypeLC.begin(), aTypeLC.end(), aTypeLC.begin(),
1024 [](char c) { return static_cast<char>(::tolower(c)); });
1025 if (aTypeLC == "supplementary")
1026 aType = (int)SketcherPrs_Tools::ANGLE_COMPLEMENTARY;
1027 else if (aTypeLC == "backward")
1028 aType = (int)SketcherPrs_Tools::ANGLE_BACKWARD;
1030 fillAttribute(aType, aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
1031 fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
1034 aFeature->execute();
1035 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1038 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setAngleComplementary(
1039 const ModelHighAPI_RefAttr & theLine1,
1040 const ModelHighAPI_RefAttr & theLine2,
1041 const ModelHighAPI_Double & theValue)
1043 std::shared_ptr<ModelAPI_Feature> aFeature =
1044 compositeFeature()->addFeature(SketchPlugin_ConstraintAngle::ID());
1045 fillAttribute(SketchPlugin_ConstraintAngle::THE_VERSION_0,
1046 aFeature->integer(SketchPlugin_ConstraintAngle::VERSION_ID()));
1047 fillAttribute(SketcherPrs_Tools::ANGLE_COMPLEMENTARY,
1048 aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
1049 fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
1050 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1051 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1052 aFeature->execute();
1053 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1056 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setAngleBackward(
1057 const ModelHighAPI_RefAttr & theLine1,
1058 const ModelHighAPI_RefAttr & theLine2,
1059 const ModelHighAPI_Double & theValue)
1061 std::shared_ptr<ModelAPI_Feature> aFeature =
1062 compositeFeature()->addFeature(SketchPlugin_ConstraintAngle::ID());
1063 fillAttribute(SketchPlugin_ConstraintAngle::THE_VERSION_0,
1064 aFeature->integer(SketchPlugin_ConstraintAngle::VERSION_ID()));
1065 fillAttribute(SketcherPrs_Tools::ANGLE_BACKWARD,
1066 aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
1067 fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
1068 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1069 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1070 aFeature->execute();
1071 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1074 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setCoincident(
1075 const ModelHighAPI_RefAttr & thePoint1,
1076 const ModelHighAPI_RefAttr & thePoint2)
1078 std::shared_ptr<ModelAPI_Feature> aFeature =
1079 compositeFeature()->addFeature(SketchPlugin_ConstraintCoincidence::ID());
1080 fillAttribute(thePoint1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1081 fillAttribute(thePoint2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1082 aFeature->execute();
1083 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1086 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setCollinear(
1087 const ModelHighAPI_RefAttr & theLine1,
1088 const ModelHighAPI_RefAttr & theLine2)
1090 std::shared_ptr<ModelAPI_Feature> aFeature =
1091 compositeFeature()->addFeature(SketchPlugin_ConstraintCollinear::ID());
1092 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1093 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1094 aFeature->execute();
1095 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1098 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setDistance(
1099 const ModelHighAPI_RefAttr & thePoint,
1100 const ModelHighAPI_RefAttr & thePointOrLine,
1101 const ModelHighAPI_Double & theValue,
1104 std::shared_ptr<ModelAPI_Feature> aFeature =
1105 compositeFeature()->addFeature(SketchPlugin_ConstraintDistance::ID());
1106 fillAttribute(thePoint, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1107 fillAttribute(thePointOrLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1108 fillAttribute(theValue, aFeature->real(SketchPlugin_Constraint::VALUE()));
1109 fillAttribute(isSigned, aFeature->boolean(SketchPlugin_ConstraintDistance::SIGNED()));
1110 aFeature->execute();
1111 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1114 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setSignedDistance(
1115 const ModelHighAPI_RefAttr & thePoint,
1116 const ModelHighAPI_RefAttr & thePointOrLine,
1117 const ModelHighAPI_Double & theValue)
1119 return setDistance(thePoint, thePointOrLine, theValue, true);
1122 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setUnsignedDistance(
1123 const ModelHighAPI_RefAttr & thePoint,
1124 const ModelHighAPI_RefAttr & thePointOrLine,
1125 const ModelHighAPI_Double & theValue)
1127 return setDistance(thePoint, thePointOrLine, theValue, false);
1130 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setHorizontalDistance(
1131 const ModelHighAPI_RefAttr & thePoint1,
1132 const ModelHighAPI_RefAttr & thePoint2,
1133 const ModelHighAPI_Double & theValue)
1135 std::shared_ptr<ModelAPI_Feature> aFeature =
1136 compositeFeature()->addFeature(SketchPlugin_ConstraintDistanceHorizontal::ID());
1137 fillAttribute(thePoint1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1138 fillAttribute(thePoint2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1139 fillAttribute(theValue,
1140 aFeature->real(SketchPlugin_ConstraintDistanceAlongDir::DISTANCE_VALUE_ID()));
1141 aFeature->execute();
1142 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1145 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setVerticalDistance(
1146 const ModelHighAPI_RefAttr & thePoint1,
1147 const ModelHighAPI_RefAttr & thePoint2,
1148 const ModelHighAPI_Double & theValue)
1150 std::shared_ptr<ModelAPI_Feature> aFeature =
1151 compositeFeature()->addFeature(SketchPlugin_ConstraintDistanceVertical::ID());
1152 fillAttribute(thePoint1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1153 fillAttribute(thePoint2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1154 fillAttribute(theValue,
1155 aFeature->real(SketchPlugin_ConstraintDistanceAlongDir::DISTANCE_VALUE_ID()));
1156 aFeature->execute();
1157 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1160 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setEqual(
1161 const ModelHighAPI_RefAttr & theObject1,
1162 const ModelHighAPI_RefAttr & theObject2)
1164 std::shared_ptr<ModelAPI_Feature> aFeature =
1165 compositeFeature()->addFeature(SketchPlugin_ConstraintEqual::ID());
1166 fillAttribute(theObject1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1167 fillAttribute(theObject2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1168 aFeature->execute();
1169 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1172 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setFillet(
1173 const ModelHighAPI_RefAttr & thePoint)
1175 std::shared_ptr<ModelAPI_Feature> aFeature =
1176 compositeFeature()->addFeature(SketchPlugin_Fillet::ID());
1177 fillAttribute(thePoint, aFeature->data()->refattr(SketchPlugin_Fillet::FILLET_POINT_ID()));
1178 apply(); // finish operation to remove Fillet feature correcly
1179 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1182 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setFilletWithRadius(
1183 const ModelHighAPI_RefAttr & thePoint,
1184 const ModelHighAPI_Double & theRadius)
1186 CompositeFeaturePtr aSketch = compositeFeature();
1187 int aNbSubs = aSketch->numberOfSubs();
1190 InterfacePtr aFilletFeature = setFillet(thePoint);
1192 // set radius for just created arc
1193 FeaturePtr anArc = aSketch->subFeature(aNbSubs - 1);
1194 if (anArc->getKind() == SketchPlugin_Arc::ID())
1195 setRadius(ModelHighAPI_RefAttr(ObjectPtr(anArc->lastResult())), ModelHighAPI_Double(theRadius));
1197 return aFilletFeature;
1200 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setFixed(
1201 const ModelHighAPI_RefAttr & theObject)
1203 std::shared_ptr<ModelAPI_Feature> aFeature =
1204 compositeFeature()->addFeature(SketchPlugin_ConstraintRigid::ID());
1205 fillAttribute(theObject, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1206 aFeature->execute();
1207 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1210 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setHorizontal(
1211 const ModelHighAPI_RefAttr & theLine)
1213 std::shared_ptr<ModelAPI_Feature> aFeature =
1214 compositeFeature()->addFeature(SketchPlugin_ConstraintHorizontal::ID());
1215 fillAttribute(theLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1216 aFeature->execute();
1217 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1220 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setLength(
1221 const ModelHighAPI_RefAttr & theLine,
1222 const ModelHighAPI_Double & theValue)
1224 std::shared_ptr<ModelAPI_Feature> aFeature =
1225 compositeFeature()->addFeature(SketchPlugin_ConstraintLength::ID());
1226 fillAttribute(theLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1227 fillAttribute(theValue, aFeature->real(SketchPlugin_Constraint::VALUE()));
1228 aFeature->execute();
1229 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1232 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setMiddlePoint(
1233 const ModelHighAPI_RefAttr & thePoint,
1234 const ModelHighAPI_RefAttr & theLine)
1236 std::shared_ptr<ModelAPI_Feature> aFeature =
1237 compositeFeature()->addFeature(SketchPlugin_ConstraintMiddle::ID());
1238 fillAttribute(thePoint, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1239 fillAttribute(theLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1240 aFeature->execute();
1241 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1244 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setParallel(
1245 const ModelHighAPI_RefAttr & theLine1,
1246 const ModelHighAPI_RefAttr & theLine2)
1248 std::shared_ptr<ModelAPI_Feature> aFeature =
1249 compositeFeature()->addFeature(SketchPlugin_ConstraintParallel::ID());
1250 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1251 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1252 aFeature->execute();
1253 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1256 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setPerpendicular(
1257 const ModelHighAPI_RefAttr & theLine1,
1258 const ModelHighAPI_RefAttr & theLine2)
1260 std::shared_ptr<ModelAPI_Feature> aFeature =
1261 compositeFeature()->addFeature(SketchPlugin_ConstraintPerpendicular::ID());
1262 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1263 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1264 aFeature->execute();
1265 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1268 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setRadius(
1269 const ModelHighAPI_RefAttr & theCircleOrArc,
1270 const ModelHighAPI_Double & theValue)
1272 std::shared_ptr<ModelAPI_Feature> aFeature =
1273 compositeFeature()->addFeature(SketchPlugin_ConstraintRadius::ID());
1274 fillAttribute(theCircleOrArc, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1275 fillAttribute(theValue, aFeature->real(SketchPlugin_Constraint::VALUE()));
1276 aFeature->execute();
1277 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1280 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setTangent(
1281 const ModelHighAPI_RefAttr & theLine,
1282 const ModelHighAPI_RefAttr & theCircle)
1284 std::shared_ptr<ModelAPI_Feature> aFeature =
1285 compositeFeature()->addFeature(SketchPlugin_ConstraintTangent::ID());
1286 fillAttribute(theLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1287 fillAttribute(theCircle, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1288 aFeature->execute();
1289 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1292 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setVertical(
1293 const ModelHighAPI_RefAttr & theLine)
1295 std::shared_ptr<ModelAPI_Feature> aFeature =
1296 compositeFeature()->addFeature(SketchPlugin_ConstraintVertical::ID());
1297 fillAttribute(theLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1298 aFeature->execute();
1299 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1302 //--------------------------------------------------------------------------------------
1304 static std::shared_ptr<GeomAPI_Pnt2d> pointCoordinates(const AttributePtr& thePoint)
1306 AttributePoint2DPtr aPnt = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(thePoint);
1307 return aPnt ? aPnt->pnt() : std::shared_ptr<GeomAPI_Pnt2d>();
1310 static std::shared_ptr<GeomAPI_Pnt2d> middlePointOnLine(const FeaturePtr& theFeature)
1312 AttributePoint2DPtr aStartAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
1313 theFeature->attribute(SketchPlugin_Line::START_ID()));
1314 AttributePoint2DPtr aEndAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
1315 theFeature->attribute(SketchPlugin_Line::END_ID()));
1317 if (!aStartAttr || !aEndAttr)
1318 return std::shared_ptr<GeomAPI_Pnt2d>();
1320 std::shared_ptr<GeomAPI_XY> aStartPoint = aStartAttr->pnt()->xy();
1321 std::shared_ptr<GeomAPI_XY> aEndPoint = aEndAttr->pnt()->xy();
1322 return std::shared_ptr<GeomAPI_Pnt2d>(
1323 new GeomAPI_Pnt2d(aStartPoint->added(aEndPoint)->multiplied(0.5)));
1326 static std::shared_ptr<GeomAPI_Pnt2d> pointOnCircle(const FeaturePtr& theFeature)
1328 AttributePoint2DPtr aCenter = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
1329 theFeature->attribute(SketchPlugin_Circle::CENTER_ID()));
1330 AttributeDoublePtr aRadius = theFeature->real(SketchPlugin_Circle::RADIUS_ID());
1332 if (!aCenter || !aRadius)
1333 return std::shared_ptr<GeomAPI_Pnt2d>();
1335 return std::shared_ptr<GeomAPI_Pnt2d>(
1336 new GeomAPI_Pnt2d(aCenter->x() + aRadius->value(), aCenter->y()));
1339 static std::shared_ptr<GeomAPI_Pnt2d> middlePointOnArc(const FeaturePtr& theFeature)
1341 static const double PI = 3.141592653589793238463;
1343 AttributePoint2DPtr aCenterAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
1344 theFeature->attribute(SketchPlugin_Arc::CENTER_ID()));
1345 AttributePoint2DPtr aStartAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
1346 theFeature->attribute(SketchPlugin_Arc::START_ID()));
1347 AttributePoint2DPtr aEndAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
1348 theFeature->attribute(SketchPlugin_Arc::END_ID()));
1350 if (!aCenterAttr || !aStartAttr || !aEndAttr)
1351 return std::shared_ptr<GeomAPI_Pnt2d>();
1353 std::shared_ptr<GeomAPI_Dir2d> aStartDir(new GeomAPI_Dir2d(
1354 aStartAttr->x() - aCenterAttr->x(), aStartAttr->y() - aCenterAttr->y()));
1355 std::shared_ptr<GeomAPI_Dir2d> aEndDir(new GeomAPI_Dir2d(
1356 aEndAttr->x() - aCenterAttr->x(), aEndAttr->y() - aCenterAttr->y()));
1358 double anAngle = aStartDir->angle(aEndDir);
1359 bool isReversed = theFeature->boolean(SketchPlugin_Arc::REVERSED_ID())->value();
1360 if (isReversed && anAngle > 0.)
1361 anAngle -= 2.0 * PI;
1362 else if (!isReversed && anAngle <= 0.)
1363 anAngle += 2.0 * PI;
1365 double cosA = cos(anAngle);
1366 double sinA = sin(anAngle);
1368 // rotate start dir to find middle point on arc
1369 double aRadius = aStartAttr->pnt()->distance(aCenterAttr->pnt());
1370 double x = aCenterAttr->x() + aRadius * (aStartDir->x() * cosA - aStartDir->y() * sinA);
1371 double y = aCenterAttr->y() + aRadius * (aStartDir->x() * sinA + aStartDir->y() * cosA);
1373 return std::shared_ptr<GeomAPI_Pnt2d>(new GeomAPI_Pnt2d(x, y));
1376 static std::shared_ptr<GeomAPI_Pnt2d> pointOnEllipse(const FeaturePtr& theFeature,
1377 bool isEllipse = true)
1379 const std::string& anAttrName = isEllipse ? SketchPlugin_Ellipse::MAJOR_AXIS_END_ID() :
1380 SketchPlugin_EllipticArc::MAJOR_AXIS_END_ID();
1381 AttributePoint2DPtr aMajorAxisEnd = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
1382 theFeature->attribute(anAttrName));
1383 return aMajorAxisEnd ? aMajorAxisEnd->pnt() : std::shared_ptr<GeomAPI_Pnt2d>();
1386 static std::shared_ptr<GeomAPI_Pnt2d> middlePointOnBSpline(const FeaturePtr& theFeature,
1387 SketchAPI_Sketch* theSketch)
1389 GeomAPI_Edge anEdge(theFeature->lastResult()->shape());
1390 GeomPointPtr aMiddle = anEdge.middlePoint();
1391 return theSketch->to2D(aMiddle);
1394 static std::shared_ptr<GeomAPI_Pnt2d> middlePoint(const ObjectPtr& theObject,
1395 SketchAPI_Sketch* theSketch)
1397 std::shared_ptr<GeomAPI_Pnt2d> aMiddlePoint;
1398 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
1400 // move only features of the following types
1401 const std::string& aFeatureKind = aFeature->getKind();
1402 if (aFeatureKind == SketchPlugin_Point::ID())
1403 aMiddlePoint = pointCoordinates(aFeature->attribute(SketchPlugin_Point::COORD_ID()));
1404 else if (aFeatureKind == SketchPlugin_Line::ID())
1405 aMiddlePoint = middlePointOnLine(aFeature);
1406 else if (aFeatureKind == SketchPlugin_Circle::ID())
1407 aMiddlePoint = pointOnCircle(aFeature);
1408 else if (aFeatureKind == SketchPlugin_Arc::ID())
1409 aMiddlePoint = middlePointOnArc(aFeature);
1410 else if (aFeatureKind == SketchPlugin_Ellipse::ID())
1411 aMiddlePoint = pointOnEllipse(aFeature);
1412 else if (aFeatureKind == SketchPlugin_EllipticArc::ID())
1413 aMiddlePoint = pointOnEllipse(aFeature, false);
1414 else if (aFeatureKind == SketchPlugin_BSpline::ID() ||
1415 aFeatureKind == SketchPlugin_BSplinePeriodic::ID())
1416 aMiddlePoint = middlePointOnBSpline(aFeature, theSketch);
1418 return aMiddlePoint;
1421 void SketchAPI_Sketch::move(const ModelHighAPI_RefAttr& theMovedEntity,
1422 const std::shared_ptr<GeomAPI_Pnt2d>& theTargetPoint)
1424 std::shared_ptr<ModelAPI_ObjectMovedMessage> aMessage(new ModelAPI_ObjectMovedMessage);
1425 theMovedEntity.fillMessage(aMessage);
1427 std::shared_ptr<GeomAPI_Pnt2d> anOriginalPosition;
1428 if (aMessage->movedAttribute())
1429 anOriginalPosition = pointCoordinates(aMessage->movedAttribute());
1431 anOriginalPosition = middlePoint(aMessage->movedObject(), this);
1433 if (!anOriginalPosition)
1434 return; // something has gone wrong, do not process movement
1436 aMessage->setOriginalPosition(anOriginalPosition);
1437 aMessage->setCurrentPosition(theTargetPoint);
1438 Events_Loop::loop()->send(aMessage);
1441 void SketchAPI_Sketch::move(const ModelHighAPI_RefAttr& theMovedEntity,
1442 double theTargetX, double theTargetY)
1444 std::shared_ptr<GeomAPI_Pnt2d> aTargetPoint(new GeomAPI_Pnt2d(theTargetX, theTargetY));
1445 move(theMovedEntity, aTargetPoint);
1448 //--------------------------------------------------------------------------------------
1450 std::shared_ptr<GeomAPI_Pnt2d> SketchAPI_Sketch::to2D(const std::shared_ptr<GeomAPI_Pnt>& thePoint)
1452 FeaturePtr aBase = feature();
1453 std::shared_ptr<GeomDataAPI_Point> aC = std::dynamic_pointer_cast<GeomDataAPI_Point>(
1454 aBase->attribute(SketchPlugin_Sketch::ORIGIN_ID()));
1455 std::shared_ptr<GeomDataAPI_Dir> aNorm = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
1456 aBase->attribute(SketchPlugin_Sketch::NORM_ID()));
1457 std::shared_ptr<GeomDataAPI_Dir> aX = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
1458 aBase->attribute(SketchPlugin_Sketch::DIRX_ID()));
1459 std::shared_ptr<GeomAPI_Dir> aY(new GeomAPI_Dir(aNorm->dir()->cross(aX->dir())));
1461 return thePoint->to2D(aC->pnt(), aX->dir(), aY);
1464 //--------------------------------------------------------------------------------------
1466 static bool isDifferent(GeomFacePtr theFace1, GeomFacePtr theFace2)
1468 // collect edges of the first face
1469 std::list<GeomShapePtr> anEdges1;
1470 for (GeomAPI_ShapeExplorer anExp(theFace1, GeomAPI_Shape::EDGE); anExp.more(); anExp.next())
1471 anEdges1.push_back(anExp.current());
1472 // compare edges of faces
1473 for (GeomAPI_ShapeExplorer anExp(theFace2, GeomAPI_Shape::EDGE); anExp.more(); anExp.next()) {
1474 GeomShapePtr aCurrent = anExp.current();
1475 bool isFound = false;
1476 std::list<GeomShapePtr>::iterator anIt1 = anEdges1.begin();
1477 for (; anIt1 != anEdges1.end(); ++anIt1)
1478 if (aCurrent->isSameGeometry(*anIt1)) {
1480 anEdges1.erase(anIt1);
1486 return !anEdges1.empty();
1489 static bool isCustomFacesOrder(CompositeFeaturePtr theSketch)
1491 ResultConstructionPtr aSketchResult =
1492 std::dynamic_pointer_cast<ModelAPI_ResultConstruction>(theSketch->lastResult());
1496 std::shared_ptr<GeomAPI_PlanarEdges> aWires =
1497 std::dynamic_pointer_cast<GeomAPI_PlanarEdges>(aSketchResult->shape());
1501 // collect faces constructed by SketchBuilder algorithm
1502 GeomAlgoAPI_SketchBuilder aSketchBuilder(aWires->origin(), aWires->dirX(),
1503 aWires->norm(), aWires);
1504 const ListOfShape& aFaces = aSketchBuilder.faces();
1506 // compare faces stored in sketch with faces generated by SketchBuilder
1507 int aNbSketchFaces = aSketchResult->facesNum();
1509 for (ListOfShape::const_iterator aFIt = aFaces.begin();
1510 aFIt != aFaces.end() && aFaceIndex < aNbSketchFaces;
1511 ++aFIt, ++aFaceIndex) {
1512 GeomFacePtr aSketchFace = aSketchResult->face(aFaceIndex);
1513 GeomFacePtr aCurFace = (*aFIt)->face();
1514 if (isDifferent(aSketchFace, aCurFace))
1520 static void edgesOfSketchFaces(CompositeFeaturePtr theSketch,
1521 std::list<std::list<ResultPtr> >& theEdges)
1523 ResultConstructionPtr aSketchResult =
1524 std::dynamic_pointer_cast<ModelAPI_ResultConstruction>(theSketch->lastResult());
1528 // collect curves of the sketch
1529 std::map<GeomCurvePtr, ResultPtr, GeomAPI_Curve::Comparator> aCurves;
1530 int aSubNum = theSketch->numberOfSubs();
1531 for (int a = 0; a < aSubNum; ++a) {
1532 FeaturePtr aSub = theSketch->subFeature(a);
1533 const std::list<ResultPtr>& aResults = aSub->results();
1534 std::list<ResultPtr>::const_iterator aRes = aResults.cbegin();
1535 for (; aRes != aResults.cend(); aRes++) {
1536 GeomShapePtr aCurShape = (*aRes)->shape();
1537 if (aCurShape && aCurShape->isEdge())
1538 aCurves[untrimmedCurve(aCurShape)] = *aRes;
1542 // convert each face to the list of results of its edges
1543 int aFacesNum = aSketchResult->facesNum();
1544 for (int a = 0; a < aFacesNum; ++a) {
1545 theEdges.push_back(std::list<ResultPtr>());
1546 std::list<ResultPtr>& aCurEdges = theEdges.back();
1548 GeomFacePtr aFace = aSketchResult->face(a);
1549 for (GeomAPI_ShapeExplorer anExp(aFace, GeomAPI_Shape::EDGE);
1550 anExp.more(); anExp.next()) {
1551 GeomCurvePtr aCurrent = untrimmedCurve(anExp.current());
1552 aCurEdges.push_back(aCurves[aCurrent]);
1557 //--------------------------------------------------------------------------------------
1559 void SketchAPI_Sketch::dump(ModelHighAPI_Dumper& theDumper) const
1561 FeaturePtr aBase = feature();
1562 const std::string& aDocName = theDumper.name(aBase->document());
1564 AttributeSelectionPtr anExternal = aBase->selection(SketchPlugin_SketchEntity::EXTERNAL_ID());
1565 if (anExternal->value()) {
1566 theDumper << aBase << " = model.addSketch(" << aDocName <<
1567 ", " << anExternal << ")" << std::endl;
1569 // Sketch is base on a plane.
1570 std::shared_ptr<GeomAPI_Pnt> anOrigin = std::dynamic_pointer_cast<GeomDataAPI_Point>(
1571 aBase->attribute(SketchPlugin_Sketch::ORIGIN_ID()))->pnt();
1572 std::shared_ptr<GeomAPI_Dir> aNormal = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
1573 aBase->attribute(SketchPlugin_Sketch::NORM_ID()))->dir();
1574 std::shared_ptr<GeomAPI_Dir> aDirX = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
1575 aBase->attribute(SketchPlugin_Sketch::DIRX_ID()))->dir();
1577 // Check the plane is coordinate plane
1578 std::wstring aPlaneName = defaultPlane(anOrigin, aNormal, aDirX);
1579 if(anExternal->context()) { // checking for selected planes
1580 if (!aPlaneName.empty()
1581 && anExternal->context()->data()
1582 && anExternal->context()->data()->name() == aPlaneName) {
1583 // dump sketch based on coordinate plane
1584 theDumper << aBase << " = model.addSketch(" << aDocName
1585 << ", model.standardPlane(\"" << aPlaneName << "\"))" << std::endl;
1586 } else { // some other plane
1587 theDumper << aBase << " = model.addSketch(" << aDocName <<
1588 ", " << anExternal<< ")" << std::endl;
1591 if (aPlaneName.empty()) {
1592 // needs import additional module
1593 theDumper.importModule("GeomAPI");
1594 // dump plane parameters
1595 const std::string& aSketchName = theDumper.name(aBase);
1596 std::string anOriginName = aSketchName + "_origin";
1597 std::string aNormalName = aSketchName + "_norm";
1598 std::string aDirXName = aSketchName + "_dirx";
1599 // use "\n" instead of std::endl to avoid automatic dumping sketch here
1600 // and then dumplicate dumping it in the next line
1601 theDumper << anOriginName << " = " << anOrigin << "\n"
1602 << aNormalName << " = " << aNormal << "\n"
1603 << aDirXName << " = " << aDirX << "\n";
1604 // dump sketch based on arbitrary plane
1605 theDumper << aBase << " = model.addSketch(" << aDocName << ", GeomAPI_Ax3("
1606 << anOriginName << ", " << aDirXName << ", " << aNormalName << "))" << std::endl;
1608 // dump sketch based on coordinate plane
1609 theDumper << aBase << " = model.addSketch(" << aDocName
1610 << ", model.defaultPlane(\"" << aPlaneName << "\"))" << std::endl;
1615 // dump sketch's subfeatures
1616 CompositeFeaturePtr aCompFeat = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(aBase);
1617 theDumper.processSubs(aCompFeat, true);
1619 // if face order differs to the order generated by SketchBuilder,
1620 // dump the list of faces for correct execution of the script
1621 if (isCustomFacesOrder(aCompFeat)) {
1622 std::list<std::list<ResultPtr> > aFaces;
1623 edgesOfSketchFaces(aCompFeat, aFaces);
1625 /// remove faces that must not be dumped
1626 std::vector< std::list<std::list<ResultPtr>>::iterator> aFacesToRemove;
1627 for(auto itFaces = aFaces.begin(); itFaces != aFaces.end(); ++itFaces)
1629 auto & facesGroup = *itFaces;
1630 std::vector<std::list<ResultPtr>::iterator> subFacestoRemove;
1631 for(auto itGroup = facesGroup.begin(); itGroup != facesGroup.end(); ++itGroup)
1633 FeaturePtr aFeature = ModelAPI_Feature::feature(*itGroup);
1634 if(theDumper.isDumped(aFeature)){
1635 subFacestoRemove.push_back(itGroup);
1638 for(auto itGroup :subFacestoRemove){
1639 facesGroup.erase(itGroup);
1642 if(!facesGroup.size()){
1643 aFacesToRemove.push_back(itFaces);
1646 for(auto itFaces :aFacesToRemove){
1647 aFaces.erase(itFaces);
1653 const std::string& aSketchName = theDumper.name(aBase);
1654 std::string aMethodName(".changeFacesOrder");
1655 std::string aSpaceShift(aSketchName.size() + aMethodName.size(), ' ');
1657 theDumper << aSketchName << aMethodName << "([";
1658 for (std::list<std::list<ResultPtr> >::iterator aFIt = aFaces.begin();
1659 aFIt != aFaces.end(); ++aFIt) {
1660 if (aFIt != aFaces.begin())
1661 theDumper << ",\n" << aSpaceShift << " ";
1664 theDumper << "\n" << aSpaceShift << " ])" << std::endl;
1665 // call model.do() for correct update of the document's labels related to the changed faces
1666 theDumper << "model.do()" << std::endl;