1 // Copyright (C) 2014-2017 CEA/DEN, EDF R&D
3 // This library is free software; you can redistribute it and/or
4 // modify it under the terms of the GNU Lesser General Public
5 // License as published by the Free Software Foundation; either
6 // version 2.1 of the License, or (at your option) any later version.
8 // This library is distributed in the hope that it will be useful,
9 // but WITHOUT ANY WARRANTY; without even the implied warranty of
10 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 // Lesser General Public License for more details.
13 // You should have received a copy of the GNU Lesser General Public
14 // License along with this library; if not, write to the Free Software
15 // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 // See http://www.salome-platform.org/ or
18 // email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
21 #include "SketchAPI_Sketch.h"
22 //--------------------------------------------------------------------------------------
23 #include <SketchPlugin_Constraint.h>
24 #include <SketchPlugin_ConstraintAngle.h>
25 #include <SketchPlugin_ConstraintCoincidence.h>
26 #include <SketchPlugin_ConstraintCollinear.h>
27 #include <SketchPlugin_ConstraintDistance.h>
28 #include <SketchPlugin_ConstraintDistanceHorizontal.h>
29 #include <SketchPlugin_ConstraintDistanceVertical.h>
30 #include <SketchPlugin_ConstraintEqual.h>
31 #include <SketchPlugin_Fillet.h>
32 #include <SketchPlugin_ConstraintHorizontal.h>
33 #include <SketchPlugin_ConstraintLength.h>
34 #include <SketchPlugin_ConstraintMiddle.h>
35 #include <SketchPlugin_ConstraintMirror.h>
36 #include <SketchPlugin_ConstraintParallel.h>
37 #include <SketchPlugin_ConstraintPerpendicular.h>
38 #include <SketchPlugin_ConstraintRadius.h>
39 #include <SketchPlugin_ConstraintRigid.h>
40 #include <SketchPlugin_Trim.h>
41 #include <SketchPlugin_Split.h>
42 #include <SketchPlugin_ConstraintTangent.h>
43 #include <SketchPlugin_ConstraintVertical.h>
44 #include <SketcherPrs_Tools.h>
45 //--------------------------------------------------------------------------------------
46 #include <ModelAPI_Events.h>
47 #include <ModelAPI_CompositeFeature.h>
48 #include <ModelAPI_ResultConstruction.h>
49 #include <ModelHighAPI_Double.h>
50 #include <ModelHighAPI_Dumper.h>
51 #include <ModelHighAPI_RefAttr.h>
52 #include <ModelHighAPI_Selection.h>
53 #include <ModelHighAPI_Services.h>
54 #include <ModelHighAPI_Tools.h>
55 //--------------------------------------------------------------------------------------
56 #include "SketchAPI_Arc.h"
57 #include "SketchAPI_MacroArc.h"
58 #include "SketchAPI_Circle.h"
59 #include "SketchAPI_IntersectionPoint.h"
60 #include "SketchAPI_Line.h"
61 #include "SketchAPI_MacroCircle.h"
62 #include "SketchAPI_Mirror.h"
63 #include "SketchAPI_Point.h"
64 #include "SketchAPI_Projection.h"
65 #include "SketchAPI_Rectangle.h"
66 #include "SketchAPI_Rotation.h"
67 #include "SketchAPI_Translation.h"
68 //--------------------------------------------------------------------------------------
69 #include <GeomAPI_Dir2d.h>
70 #include <GeomAPI_XY.h>
72 //--------------------------------------------------------------------------------------
73 SketchAPI_Sketch::SketchAPI_Sketch(
74 const std::shared_ptr<ModelAPI_Feature> & theFeature)
75 : ModelHighAPI_Interface(theFeature)
80 SketchAPI_Sketch::SketchAPI_Sketch(
81 const std::shared_ptr<ModelAPI_Feature> & theFeature,
82 const std::shared_ptr<GeomAPI_Ax3> & thePlane)
83 : ModelHighAPI_Interface(theFeature)
90 SketchAPI_Sketch::SketchAPI_Sketch(
91 const std::shared_ptr<ModelAPI_Feature> & theFeature,
92 const ModelHighAPI_Selection & theExternal)
93 : ModelHighAPI_Interface(theFeature)
96 setExternal(theExternal);
100 SketchAPI_Sketch::SketchAPI_Sketch(
101 const std::shared_ptr<ModelAPI_Feature> & theFeature,
102 std::shared_ptr<ModelAPI_Object> thePlaneObject)
103 : ModelHighAPI_Interface(theFeature)
106 setExternal(thePlaneObject);
110 SketchAPI_Sketch::~SketchAPI_Sketch()
115 //--------------------------------------------------------------------------------------
116 std::shared_ptr<ModelAPI_CompositeFeature> SketchAPI_Sketch::compositeFeature() const
118 return std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(feature());
121 //--------------------------------------------------------------------------------------
122 void SketchAPI_Sketch::setPlane(const std::shared_ptr<GeomAPI_Ax3> & thePlane)
124 fillAttribute(thePlane->origin(), myorigin);
125 fillAttribute(thePlane->dirX(), mydirX);
126 fillAttribute(thePlane->normal(), mynormal);
131 void SketchAPI_Sketch::setExternal(const ModelHighAPI_Selection & theExternal)
133 fillAttribute(theExternal, myexternal);
138 void SketchAPI_Sketch::setExternal(std::shared_ptr<ModelAPI_Object> thePlaneObject)
140 ResultPtr aRes = std::dynamic_pointer_cast<ModelAPI_Result>(thePlaneObject);
141 ModelHighAPI_Selection aSel(aRes);
145 //--------------------------------------------------------------------------------------
146 void SketchAPI_Sketch::setValue(
147 const std::shared_ptr<ModelHighAPI_Interface> & theConstraint,
148 const ModelHighAPI_Double & theValue)
150 fillAttribute(theValue, theConstraint->feature()->real(SketchPlugin_Constraint::VALUE()));
152 // theConstraint->execute();
155 //--------------------------------------------------------------------------------------
156 std::list<ModelHighAPI_Selection> SketchAPI_Sketch::selectFace() const
158 const_cast<SketchAPI_Sketch*>(this)->execute();
160 std::list<ModelHighAPI_Selection> aSelectionList;
162 ResultConstructionPtr aResultConstruction =
163 std::dynamic_pointer_cast<ModelAPI_ResultConstruction>(feature()->firstResult());
164 if (aResultConstruction.get() == NULL)
165 return aSelectionList;
167 for (int anIndex = 0; anIndex < aResultConstruction->facesNum(); ++anIndex) {
168 aSelectionList.push_back(
169 ModelHighAPI_Selection(aResultConstruction,
170 aResultConstruction->face(anIndex)));
173 return aSelectionList;
176 //--------------------------------------------------------------------------------------
177 SketchPtr addSketch(const std::shared_ptr<ModelAPI_Document> & thePart,
178 const std::shared_ptr<GeomAPI_Ax3> & thePlane)
180 std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(SketchAPI_Sketch::ID());
181 return SketchPtr(new SketchAPI_Sketch(aFeature, thePlane));
184 SketchPtr addSketch(const std::shared_ptr<ModelAPI_Document> & thePart,
185 const ModelHighAPI_Selection & theExternal)
187 std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(SketchAPI_Sketch::ID());
188 return SketchPtr(new SketchAPI_Sketch(aFeature, theExternal));
191 SketchPtr addSketch(const std::shared_ptr<ModelAPI_Document> & thePart,
192 const std::string & theExternalName)
194 std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(SketchAPI_Sketch::ID());
196 new SketchAPI_Sketch(aFeature, ModelHighAPI_Selection("FACE", theExternalName)));
199 SketchPtr addSketch(const std::shared_ptr<ModelAPI_Document> & thePart,
200 std::shared_ptr<ModelAPI_Object> thePlaneObject)
202 std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(SketchAPI_Sketch::ID());
203 return SketchPtr(new SketchAPI_Sketch(aFeature, thePlaneObject));
207 //--------------------------------------------------------------------------------------
208 std::shared_ptr<SketchAPI_Point> SketchAPI_Sketch::addPoint(
209 double theX, double theY)
211 std::shared_ptr<ModelAPI_Feature> aFeature =
212 compositeFeature()->addFeature(SketchPlugin_Point::ID());
213 return PointPtr(new SketchAPI_Point(aFeature, theX, theY));
215 std::shared_ptr<SketchAPI_Point> SketchAPI_Sketch::addPoint(
216 const std::shared_ptr<GeomAPI_Pnt2d> & thePoint)
218 std::shared_ptr<ModelAPI_Feature> aFeature =
219 compositeFeature()->addFeature(SketchPlugin_Point::ID());
220 return PointPtr(new SketchAPI_Point(aFeature, thePoint));
222 std::shared_ptr<SketchAPI_Point>
223 SketchAPI_Sketch::addPoint(const ModelHighAPI_Selection & theExternal)
225 std::shared_ptr<ModelAPI_Feature> aFeature =
226 compositeFeature()->addFeature(SketchPlugin_Point::ID());
227 return PointPtr(new SketchAPI_Point(aFeature, theExternal));
229 std::shared_ptr<SketchAPI_Point> SketchAPI_Sketch::addPoint(const std::string & theExternalName)
231 std::shared_ptr<ModelAPI_Feature> aFeature =
232 compositeFeature()->addFeature(SketchPlugin_Point::ID());
233 return PointPtr(new SketchAPI_Point(aFeature, theExternalName));
236 //--------------------------------------------------------------------------------------
237 std::shared_ptr<SketchAPI_IntersectionPoint> SketchAPI_Sketch::addIntersectionPoint(
238 const ModelHighAPI_Selection & theExternal)
240 std::shared_ptr<ModelAPI_Feature> aFeature =
241 compositeFeature()->addFeature(SketchPlugin_IntersectionPoint::ID());
242 return IntersectionPointPtr(new SketchAPI_IntersectionPoint(aFeature, theExternal));
244 std::shared_ptr<SketchAPI_IntersectionPoint> SketchAPI_Sketch::addIntersectionPoint(
245 const std::string & theExternalName)
247 std::shared_ptr<ModelAPI_Feature> aFeature =
248 compositeFeature()->addFeature(SketchPlugin_IntersectionPoint::ID());
249 return IntersectionPointPtr(new SketchAPI_IntersectionPoint(aFeature, theExternalName));
252 //--------------------------------------------------------------------------------------
253 std::shared_ptr<SketchAPI_Line> SketchAPI_Sketch::addLine(double theX1, double theY1,
254 double theX2, double theY2)
256 std::shared_ptr<ModelAPI_Feature> aFeature =
257 compositeFeature()->addFeature(SketchPlugin_Line::ID());
258 return LinePtr(new SketchAPI_Line(aFeature, theX1, theY1, theX2, theY2));
260 std::shared_ptr<SketchAPI_Line> SketchAPI_Sketch::addLine(
261 const std::shared_ptr<GeomAPI_Pnt2d> & theStartPoint,
262 const std::shared_ptr<GeomAPI_Pnt2d> & theEndPoint)
264 std::shared_ptr<ModelAPI_Feature> aFeature =
265 compositeFeature()->addFeature(SketchPlugin_Line::ID());
266 return LinePtr(new SketchAPI_Line(aFeature, theStartPoint, theEndPoint));
268 std::shared_ptr<SketchAPI_Line>
269 SketchAPI_Sketch::addLine(const ModelHighAPI_Selection & theExternal)
271 std::shared_ptr<ModelAPI_Feature> aFeature =
272 compositeFeature()->addFeature(SketchPlugin_Line::ID());
273 return LinePtr(new SketchAPI_Line(aFeature, theExternal));
275 std::shared_ptr<SketchAPI_Line> SketchAPI_Sketch::addLine(const std::string & theExternalName)
277 std::shared_ptr<ModelAPI_Feature> aFeature =
278 compositeFeature()->addFeature(SketchPlugin_Line::ID());
279 return LinePtr(new SketchAPI_Line(aFeature, theExternalName));
282 //--------------------------------------------------------------------------------------
283 std::shared_ptr<SketchAPI_Rectangle> SketchAPI_Sketch::addRectangle(double theX1, double theY1,
284 double theX2, double theY2)
286 std::shared_ptr<ModelAPI_Feature> aFeature =
287 compositeFeature()->addFeature(SketchAPI_Rectangle::ID());
288 return RectanglePtr(new SketchAPI_Rectangle(aFeature, theX1, theY1, theX2, theY2));
290 std::shared_ptr<SketchAPI_Rectangle> SketchAPI_Sketch::addRectangle(
291 const std::shared_ptr<GeomAPI_Pnt2d> & theStartPoint,
292 const std::shared_ptr<GeomAPI_Pnt2d> & theEndPoint)
294 std::shared_ptr<ModelAPI_Feature> aFeature =
295 compositeFeature()->addFeature(SketchAPI_Rectangle::ID());
296 return RectanglePtr(new SketchAPI_Rectangle(aFeature, theStartPoint, theEndPoint));
299 //--------------------------------------------------------------------------------------
300 std::shared_ptr<SketchAPI_Circle> SketchAPI_Sketch::addCircle(double theCenterX,
304 std::shared_ptr<ModelAPI_Feature> aFeature =
305 compositeFeature()->addFeature(SketchPlugin_Circle::ID());
306 return CirclePtr(new SketchAPI_Circle(aFeature, theCenterX, theCenterY, theRadius));
309 std::shared_ptr<SketchAPI_Circle> SketchAPI_Sketch::addCircle(
310 const std::shared_ptr<GeomAPI_Pnt2d>& theCenter,
313 std::shared_ptr<ModelAPI_Feature> aFeature =
314 compositeFeature()->addFeature(SketchPlugin_Circle::ID());
315 return CirclePtr(new SketchAPI_Circle(aFeature, theCenter, theRadius));
318 std::shared_ptr<SketchAPI_MacroCircle> SketchAPI_Sketch::addCircle(double theCenterX,
323 std::shared_ptr<ModelAPI_Feature> aFeature =
324 compositeFeature()->addFeature(SketchPlugin_MacroCircle::ID());
325 return MacroCirclePtr(new SketchAPI_MacroCircle(aFeature, theCenterX, theCenterY,
326 thePassedX, thePassedY));
329 std::shared_ptr<SketchAPI_MacroCircle> SketchAPI_Sketch::addCircle(
330 const std::shared_ptr<GeomAPI_Pnt2d>& theCenterPoint,
331 const std::shared_ptr<GeomAPI_Pnt2d>& thePassedPoint)
333 std::shared_ptr<ModelAPI_Feature> aFeature =
334 compositeFeature()->addFeature(SketchPlugin_MacroCircle::ID());
335 return MacroCirclePtr(new SketchAPI_MacroCircle(aFeature, theCenterPoint, thePassedPoint));
338 std::shared_ptr<SketchAPI_MacroCircle> SketchAPI_Sketch::addCircle(double theX1, double theY1,
339 double theX2, double theY2,
340 double theX3, double theY3)
342 std::shared_ptr<ModelAPI_Feature> aFeature =
343 compositeFeature()->addFeature(SketchPlugin_MacroCircle::ID());
344 return MacroCirclePtr(new SketchAPI_MacroCircle(aFeature, theX1, theY1,
349 std::shared_ptr<SketchAPI_MacroCircle> SketchAPI_Sketch::addCircle(
350 const std::shared_ptr<GeomAPI_Pnt2d>& thePoint1,
351 const std::shared_ptr<GeomAPI_Pnt2d>& thePoint2,
352 const std::shared_ptr<GeomAPI_Pnt2d>& thePoint3)
354 std::shared_ptr<ModelAPI_Feature> aFeature =
355 compositeFeature()->addFeature(SketchPlugin_MacroCircle::ID());
356 return MacroCirclePtr(new SketchAPI_MacroCircle(aFeature, thePoint1, thePoint2, thePoint3));
359 std::shared_ptr<SketchAPI_Circle>
360 SketchAPI_Sketch::addCircle(const ModelHighAPI_Selection & theExternal)
362 std::shared_ptr<ModelAPI_Feature> aFeature =
363 compositeFeature()->addFeature(SketchPlugin_Circle::ID());
364 return CirclePtr(new SketchAPI_Circle(aFeature, theExternal));
367 std::shared_ptr<SketchAPI_Circle> SketchAPI_Sketch::addCircle(const std::string & theExternalName)
369 // TODO(spo): Add constraint SketchConstraintRigid like in PythonAPI. Is it necessary?
370 std::shared_ptr<ModelAPI_Feature> aFeature =
371 compositeFeature()->addFeature(SketchPlugin_Circle::ID());
372 return CirclePtr(new SketchAPI_Circle(aFeature, theExternalName));
375 //--------------------------------------------------------------------------------------
376 std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(double theCenterX, double theCenterY,
377 double theStartX, double theStartY,
378 double theEndX, double theEndY,
381 std::shared_ptr<ModelAPI_Feature> aFeature =
382 compositeFeature()->addFeature(SketchPlugin_Arc::ID());
383 return ArcPtr(new SketchAPI_Arc(aFeature,
384 theCenterX, theCenterY,
385 theStartX, theStartY,
390 std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(
391 const std::shared_ptr<GeomAPI_Pnt2d>& theCenter,
392 const std::shared_ptr<GeomAPI_Pnt2d>& theStart,
393 const std::shared_ptr<GeomAPI_Pnt2d>& theEnd,
396 std::shared_ptr<ModelAPI_Feature> aFeature =
397 compositeFeature()->addFeature(SketchPlugin_Arc::ID());
398 return ArcPtr(new SketchAPI_Arc(aFeature, theCenter, theStart, theEnd, theInversed));
401 std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(double theStartX, double theStartY,
402 double theEndX, double theEndY,
403 double thePassedX, double thePassedY)
405 std::shared_ptr<ModelAPI_Feature> aFeature =
406 compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
407 return MacroArcPtr(new SketchAPI_MacroArc(aFeature,
408 theStartX, theStartY,
410 thePassedX, thePassedY));
413 std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(
414 const std::shared_ptr<GeomAPI_Pnt2d>& theStart,
415 const std::shared_ptr<GeomAPI_Pnt2d>& theEnd,
416 const std::shared_ptr<GeomAPI_Pnt2d>& thePassed)
418 std::shared_ptr<ModelAPI_Feature> aFeature =
419 compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
420 return MacroArcPtr(new SketchAPI_MacroArc(aFeature, theStart, theEnd, thePassed));
423 std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(
424 const ModelHighAPI_RefAttr& theTangentPoint,
425 double theEndX, double theEndY,
428 std::shared_ptr<ModelAPI_Feature> aFeature =
429 compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
430 return MacroArcPtr(new SketchAPI_MacroArc(
431 aFeature, theTangentPoint, theEndX, theEndY, theInversed));
434 std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(
435 const ModelHighAPI_RefAttr& theTangentPoint,
436 const std::shared_ptr<GeomAPI_Pnt2d>& theEnd,
439 std::shared_ptr<ModelAPI_Feature> aFeature =
440 compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
441 return MacroArcPtr(new SketchAPI_MacroArc(aFeature, theTangentPoint, theEnd, theInversed));
444 std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(const ModelHighAPI_Selection & theExternal)
446 std::shared_ptr<ModelAPI_Feature> aFeature =
447 compositeFeature()->addFeature(SketchPlugin_Arc::ID());
448 return ArcPtr(new SketchAPI_Arc(aFeature, theExternal));
451 std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(const std::string & theExternalName)
453 // TODO(spo): Add constraint SketchConstraintRigid like in PythonAPI. Is it necessary?
454 std::shared_ptr<ModelAPI_Feature> aFeature =
455 compositeFeature()->addFeature(SketchPlugin_Arc::ID());
456 return ArcPtr(new SketchAPI_Arc(aFeature, theExternalName));
459 //--------------------------------------------------------------------------------------
460 std::shared_ptr<SketchAPI_Projection> SketchAPI_Sketch::addProjection(
461 const ModelHighAPI_Selection & theExternalFeature)
463 std::shared_ptr<ModelAPI_Feature> aFeature =
464 compositeFeature()->addFeature(SketchPlugin_Projection::ID());
465 return ProjectionPtr(new SketchAPI_Projection(aFeature, theExternalFeature));
468 std::shared_ptr<SketchAPI_Projection> SketchAPI_Sketch::addProjection(
469 const std::string & theExternalName)
471 std::shared_ptr<ModelAPI_Feature> aFeature =
472 compositeFeature()->addFeature(SketchPlugin_Projection::ID());
473 return ProjectionPtr(new SketchAPI_Projection(aFeature, theExternalName));
476 //--------------------------------------------------------------------------------------
477 std::shared_ptr<SketchAPI_Mirror> SketchAPI_Sketch::addMirror(
478 const ModelHighAPI_RefAttr & theMirrorLine,
479 const std::list<std::shared_ptr<ModelAPI_Object> > & theObjects)
481 std::shared_ptr<ModelAPI_Feature> aFeature =
482 compositeFeature()->addFeature(SketchPlugin_ConstraintMirror::ID());
483 return MirrorPtr(new SketchAPI_Mirror(aFeature, theMirrorLine, theObjects));
486 //--------------------------------------------------------------------------------------
487 std::shared_ptr<SketchAPI_Translation> SketchAPI_Sketch::addTranslation(
488 const std::list<std::shared_ptr<ModelAPI_Object> > & theObjects,
489 const ModelHighAPI_RefAttr & thePoint1,
490 const ModelHighAPI_RefAttr & thePoint2,
491 const ModelHighAPI_Integer & theNumberOfObjects,
494 std::shared_ptr<ModelAPI_Feature> aFeature =
495 compositeFeature()->addFeature(SketchPlugin_MultiTranslation::ID());
496 return TranslationPtr(new SketchAPI_Translation(aFeature, theObjects, thePoint1,
497 thePoint2, theNumberOfObjects, theFullValue));
500 //--------------------------------------------------------------------------------------
501 std::shared_ptr<SketchAPI_Rotation> SketchAPI_Sketch::addRotation(
502 const std::list<std::shared_ptr<ModelAPI_Object> > & theObjects,
503 const ModelHighAPI_RefAttr & theCenter,
504 const ModelHighAPI_Double & theAngle,
505 const ModelHighAPI_Integer & theNumberOfObjects,
508 std::shared_ptr<ModelAPI_Feature> aFeature =
509 compositeFeature()->addFeature(SketchPlugin_MultiRotation::ID());
511 new SketchAPI_Rotation(aFeature, theObjects, theCenter,
512 theAngle, theNumberOfObjects, theFullValue));
515 //--------------------------------------------------------------------------------------
516 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::addSplit(
517 const ModelHighAPI_Reference& theFeature,
518 const std::shared_ptr<GeomAPI_Pnt2d>& thePositionPoint)
520 std::shared_ptr<ModelAPI_Feature> aFeature =
521 compositeFeature()->addFeature(SketchPlugin_Split::ID());
522 fillAttribute(theFeature, aFeature->reference(SketchPlugin_Split::SELECTED_OBJECT()));
524 AttributePtr anAttribute = aFeature->attribute(SketchPlugin_Split::SELECTED_POINT());
525 if (anAttribute->attributeType() == GeomDataAPI_Point2D::typeId()) {
526 AttributePoint2DPtr aPointAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(anAttribute);
527 fillAttribute(thePositionPoint, aPointAttr);
530 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
533 //--------------------------------------------------------------------------------------
534 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::addTrim(
535 const ModelHighAPI_Reference& theFeature,
536 const std::shared_ptr<GeomAPI_Pnt2d>& thePositionPoint)
538 std::shared_ptr<ModelAPI_Feature> aFeature =
539 compositeFeature()->addFeature(SketchPlugin_Trim::ID());
540 fillAttribute(theFeature, aFeature->reference(SketchPlugin_Trim::SELECTED_OBJECT()));
542 AttributePtr anAttribute = aFeature->attribute(SketchPlugin_Trim::SELECTED_POINT());
543 if (anAttribute->attributeType() == GeomDataAPI_Point2D::typeId()) {
544 AttributePoint2DPtr aPointAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(anAttribute);
545 fillAttribute(thePositionPoint, aPointAttr);
548 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
551 //--------------------------------------------------------------------------------------
552 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setAngle(
553 const ModelHighAPI_RefAttr & theLine1,
554 const ModelHighAPI_RefAttr & theLine2,
555 const ModelHighAPI_Double & theValue)
557 std::shared_ptr<ModelAPI_Feature> aFeature =
558 compositeFeature()->addFeature(SketchPlugin_ConstraintAngle::ID());
559 fillAttribute(SketcherPrs_Tools::ANGLE_DIRECT,
560 aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
561 // fill the value before llines to avoid calculation of angle value by the Angle feature
562 fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
563 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
564 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
566 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
569 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setAngleComplementary(
570 const ModelHighAPI_RefAttr & theLine1,
571 const ModelHighAPI_RefAttr & theLine2,
572 const ModelHighAPI_Double & theValue)
574 std::shared_ptr<ModelAPI_Feature> aFeature =
575 compositeFeature()->addFeature(SketchPlugin_ConstraintAngle::ID());
576 fillAttribute(SketcherPrs_Tools::ANGLE_COMPLEMENTARY,
577 aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
578 fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
579 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
580 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
581 // fillAttribute(theValue, aFeature->real(SketchPlugin_Constraint::VALUE()));
583 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
586 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setAngleBackward(
587 const ModelHighAPI_RefAttr & theLine1,
588 const ModelHighAPI_RefAttr & theLine2,
589 const ModelHighAPI_Double & theValue)
591 std::shared_ptr<ModelAPI_Feature> aFeature =
592 compositeFeature()->addFeature(SketchPlugin_ConstraintAngle::ID());
593 fillAttribute(SketcherPrs_Tools::ANGLE_BACKWARD,
594 aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
595 fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
596 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
597 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
598 // fillAttribute(theValue, aFeature->real(SketchPlugin_Constraint::VALUE()));
600 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
603 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setCoincident(
604 const ModelHighAPI_RefAttr & thePoint1,
605 const ModelHighAPI_RefAttr & thePoint2)
607 std::shared_ptr<ModelAPI_Feature> aFeature =
608 compositeFeature()->addFeature(SketchPlugin_ConstraintCoincidence::ID());
609 fillAttribute(thePoint1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
610 fillAttribute(thePoint2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
612 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
615 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setCollinear(
616 const ModelHighAPI_RefAttr & theLine1,
617 const ModelHighAPI_RefAttr & theLine2)
619 std::shared_ptr<ModelAPI_Feature> aFeature =
620 compositeFeature()->addFeature(SketchPlugin_ConstraintCollinear::ID());
621 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
622 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
624 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
627 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setDistance(
628 const ModelHighAPI_RefAttr & thePoint,
629 const ModelHighAPI_RefAttr & thePointOrLine,
630 const ModelHighAPI_Double & theValue,
633 std::shared_ptr<ModelAPI_Feature> aFeature =
634 compositeFeature()->addFeature(SketchPlugin_ConstraintDistance::ID());
635 fillAttribute(thePoint, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
636 fillAttribute(thePointOrLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
637 fillAttribute(theValue, aFeature->real(SketchPlugin_Constraint::VALUE()));
638 fillAttribute(isSigned, aFeature->boolean(SketchPlugin_ConstraintDistance::SIGNED()));
640 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
643 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setSignedDistance(
644 const ModelHighAPI_RefAttr & thePoint,
645 const ModelHighAPI_RefAttr & thePointOrLine,
646 const ModelHighAPI_Double & theValue)
648 return setDistance(thePoint, thePointOrLine, theValue, true);
651 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setUnsignedDistance(
652 const ModelHighAPI_RefAttr & thePoint,
653 const ModelHighAPI_RefAttr & thePointOrLine,
654 const ModelHighAPI_Double & theValue)
656 return setDistance(thePoint, thePointOrLine, theValue, false);
659 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setHorizontalDistance(
660 const ModelHighAPI_RefAttr & thePoint1,
661 const ModelHighAPI_RefAttr & thePoint2,
662 const ModelHighAPI_Double & theValue)
664 std::shared_ptr<ModelAPI_Feature> aFeature =
665 compositeFeature()->addFeature(SketchPlugin_ConstraintDistanceHorizontal::ID());
666 fillAttribute(thePoint1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
667 fillAttribute(thePoint2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
668 fillAttribute(theValue, aFeature->real(SketchPlugin_Constraint::VALUE()));
670 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
673 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setVerticalDistance(
674 const ModelHighAPI_RefAttr & thePoint1,
675 const ModelHighAPI_RefAttr & thePoint2,
676 const ModelHighAPI_Double & theValue)
678 std::shared_ptr<ModelAPI_Feature> aFeature =
679 compositeFeature()->addFeature(SketchPlugin_ConstraintDistanceVertical::ID());
680 fillAttribute(thePoint1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
681 fillAttribute(thePoint2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
682 fillAttribute(theValue, aFeature->real(SketchPlugin_Constraint::VALUE()));
684 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
687 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setEqual(
688 const ModelHighAPI_RefAttr & theObject1,
689 const ModelHighAPI_RefAttr & theObject2)
691 std::shared_ptr<ModelAPI_Feature> aFeature =
692 compositeFeature()->addFeature(SketchPlugin_ConstraintEqual::ID());
693 fillAttribute(theObject1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
694 fillAttribute(theObject2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
696 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
699 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setFillet(
700 const ModelHighAPI_RefAttr & thePoint)
702 std::shared_ptr<ModelAPI_Feature> aFeature =
703 compositeFeature()->addFeature(SketchPlugin_Fillet::ID());
704 fillAttribute(thePoint, aFeature->data()->refattr(SketchPlugin_Fillet::FILLET_POINT_ID()));
705 apply(); // finish operation to remove Fillet feature correcly
706 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
709 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setFilletWithRadius(
710 const ModelHighAPI_RefAttr & thePoint,
711 const ModelHighAPI_Double & theRadius)
713 CompositeFeaturePtr aSketch = compositeFeature();
714 int aNbSubs = aSketch->numberOfSubs();
717 InterfacePtr aFilletFeature = setFillet(thePoint);
719 // set radius for just created arc
720 FeaturePtr anArc = aSketch->subFeature(aNbSubs - 1);
721 if (anArc->getKind() == SketchPlugin_Arc::ID())
722 setRadius(ModelHighAPI_RefAttr(ObjectPtr(anArc->lastResult())), ModelHighAPI_Double(theRadius));
724 return aFilletFeature;
727 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setFixed(
728 const ModelHighAPI_RefAttr & theObject)
730 std::shared_ptr<ModelAPI_Feature> aFeature =
731 compositeFeature()->addFeature(SketchPlugin_ConstraintRigid::ID());
732 fillAttribute(theObject, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
734 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
737 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setHorizontal(
738 const ModelHighAPI_RefAttr & theLine)
740 std::shared_ptr<ModelAPI_Feature> aFeature =
741 compositeFeature()->addFeature(SketchPlugin_ConstraintHorizontal::ID());
742 fillAttribute(theLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
744 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
747 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setLength(
748 const ModelHighAPI_RefAttr & theLine,
749 const ModelHighAPI_Double & theValue)
751 std::shared_ptr<ModelAPI_Feature> aFeature =
752 compositeFeature()->addFeature(SketchPlugin_ConstraintLength::ID());
753 fillAttribute(theLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
754 fillAttribute(theValue, aFeature->real(SketchPlugin_Constraint::VALUE()));
756 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
759 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setMiddlePoint(
760 const ModelHighAPI_RefAttr & thePoint,
761 const ModelHighAPI_RefAttr & theLine)
763 std::shared_ptr<ModelAPI_Feature> aFeature =
764 compositeFeature()->addFeature(SketchPlugin_ConstraintMiddle::ID());
765 fillAttribute(thePoint, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
766 fillAttribute(theLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
768 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
771 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setParallel(
772 const ModelHighAPI_RefAttr & theLine1,
773 const ModelHighAPI_RefAttr & theLine2)
775 std::shared_ptr<ModelAPI_Feature> aFeature =
776 compositeFeature()->addFeature(SketchPlugin_ConstraintParallel::ID());
777 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
778 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
780 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
783 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setPerpendicular(
784 const ModelHighAPI_RefAttr & theLine1,
785 const ModelHighAPI_RefAttr & theLine2)
787 std::shared_ptr<ModelAPI_Feature> aFeature =
788 compositeFeature()->addFeature(SketchPlugin_ConstraintPerpendicular::ID());
789 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
790 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
792 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
795 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setRadius(
796 const ModelHighAPI_RefAttr & theCircleOrArc,
797 const ModelHighAPI_Double & theValue)
799 std::shared_ptr<ModelAPI_Feature> aFeature =
800 compositeFeature()->addFeature(SketchPlugin_ConstraintRadius::ID());
801 fillAttribute(theCircleOrArc, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
802 fillAttribute(theValue, aFeature->real(SketchPlugin_Constraint::VALUE()));
804 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
807 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setTangent(
808 const ModelHighAPI_RefAttr & theLine,
809 const ModelHighAPI_RefAttr & theCircle)
811 std::shared_ptr<ModelAPI_Feature> aFeature =
812 compositeFeature()->addFeature(SketchPlugin_ConstraintTangent::ID());
813 fillAttribute(theLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
814 fillAttribute(theCircle, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
816 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
819 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setVertical(
820 const ModelHighAPI_RefAttr & theLine)
822 std::shared_ptr<ModelAPI_Feature> aFeature =
823 compositeFeature()->addFeature(SketchPlugin_ConstraintVertical::ID());
824 fillAttribute(theLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
826 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
829 //--------------------------------------------------------------------------------------
831 static std::shared_ptr<GeomAPI_Pnt2d> pointCoordinates(const AttributePtr& thePoint)
833 AttributePoint2DPtr aPnt = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(thePoint);
836 return std::shared_ptr<GeomAPI_Pnt2d>();
839 static std::shared_ptr<GeomAPI_Pnt2d> middlePointOnLine(const FeaturePtr& theFeature)
841 AttributePoint2DPtr aStartAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
842 theFeature->attribute(SketchPlugin_Line::START_ID()));
843 AttributePoint2DPtr aEndAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
844 theFeature->attribute(SketchPlugin_Line::END_ID()));
846 if (!aStartAttr || !aEndAttr)
847 return std::shared_ptr<GeomAPI_Pnt2d>();
849 std::shared_ptr<GeomAPI_XY> aStartPoint = aStartAttr->pnt()->xy();
850 std::shared_ptr<GeomAPI_XY> aEndPoint = aEndAttr->pnt()->xy();
851 return std::shared_ptr<GeomAPI_Pnt2d>(
852 new GeomAPI_Pnt2d(aStartPoint->added(aEndPoint)->multiplied(0.5)));
855 static std::shared_ptr<GeomAPI_Pnt2d> pointOnCircle(const FeaturePtr& theFeature)
857 AttributePoint2DPtr aCenter = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
858 theFeature->attribute(SketchPlugin_Circle::CENTER_ID()));
859 AttributeDoublePtr aRadius = theFeature->real(SketchPlugin_Circle::RADIUS_ID());
861 if (!aCenter || !aRadius)
862 return std::shared_ptr<GeomAPI_Pnt2d>();
864 return std::shared_ptr<GeomAPI_Pnt2d>(
865 new GeomAPI_Pnt2d(aCenter->x() + aRadius->value(), aCenter->y()));
868 static std::shared_ptr<GeomAPI_Pnt2d> middlePointOnArc(const FeaturePtr& theFeature)
870 static const double PI = 3.141592653589793238463;
872 AttributePoint2DPtr aCenterAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
873 theFeature->attribute(SketchPlugin_Arc::CENTER_ID()));
874 AttributePoint2DPtr aStartAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
875 theFeature->attribute(SketchPlugin_Arc::START_ID()));
876 AttributePoint2DPtr aEndAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
877 theFeature->attribute(SketchPlugin_Arc::END_ID()));
879 if (!aCenterAttr || !aStartAttr || !aEndAttr)
880 return std::shared_ptr<GeomAPI_Pnt2d>();
882 std::shared_ptr<GeomAPI_Dir2d> aStartDir(new GeomAPI_Dir2d(
883 aStartAttr->x() - aCenterAttr->x(), aStartAttr->y() - aCenterAttr->y()));
884 std::shared_ptr<GeomAPI_Dir2d> aEndDir(new GeomAPI_Dir2d(
885 aEndAttr->x() - aCenterAttr->x(), aEndAttr->y() - aCenterAttr->y()));
887 double anAngle = aStartDir->angle(aEndDir);
888 bool isReversed = theFeature->boolean(SketchPlugin_Arc::REVERSED_ID())->value();
889 if (isReversed && anAngle > 0.)
891 else if (!isReversed && anAngle <= 0.)
894 double cosA = cos(anAngle);
895 double sinA = sin(anAngle);
897 // rotate start dir to find middle point on arc
898 double aRadius = aStartAttr->pnt()->distance(aCenterAttr->pnt());
899 double x = aCenterAttr->x() + aRadius * (aStartDir->x() * cosA - aStartDir->y() * sinA);
900 double y = aCenterAttr->y() + aRadius * (aStartDir->x() * sinA + aStartDir->y() * cosA);
902 return std::shared_ptr<GeomAPI_Pnt2d>(new GeomAPI_Pnt2d(x, y));
905 static std::shared_ptr<GeomAPI_Pnt2d> middlePoint(const ObjectPtr& theObject)
907 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
909 const std::string& aFeatureKind = aFeature->getKind();
910 if (aFeatureKind == SketchPlugin_Point::ID())
911 return pointCoordinates(aFeature->attribute(SketchPlugin_Point::COORD_ID()));
912 else if (aFeatureKind == SketchPlugin_Line::ID())
913 return middlePointOnLine(aFeature);
914 else if (aFeatureKind == SketchPlugin_Circle::ID())
915 return pointOnCircle(aFeature);
916 else if (aFeatureKind == SketchPlugin_Arc::ID())
917 return middlePointOnArc(aFeature);
919 // do not move other types of features
920 return std::shared_ptr<GeomAPI_Pnt2d>();
923 void SketchAPI_Sketch::move(const ModelHighAPI_RefAttr& theMovedEntity,
924 const std::shared_ptr<GeomAPI_Pnt2d>& theTargetPoint)
926 std::shared_ptr<ModelAPI_ObjectMovedMessage> aMessage(new ModelAPI_ObjectMovedMessage);
927 theMovedEntity.fillMessage(aMessage);
929 std::shared_ptr<GeomAPI_Pnt2d> anOriginalPosition;
930 if (aMessage->movedAttribute())
931 anOriginalPosition = pointCoordinates(aMessage->movedAttribute());
933 anOriginalPosition = middlePoint(aMessage->movedObject());
935 if (!anOriginalPosition)
936 return; // something has gone wrong, do not process movement
938 aMessage->setOriginalPosition(anOriginalPosition);
939 aMessage->setCurrentPosition(theTargetPoint);
940 Events_Loop::loop()->send(aMessage);
943 void SketchAPI_Sketch::move(const ModelHighAPI_RefAttr& theMovedEntity,
944 double theTargetX, double theTargetY)
946 std::shared_ptr<GeomAPI_Pnt2d> aTargetPoint(new GeomAPI_Pnt2d(theTargetX, theTargetY));
947 move(theMovedEntity, aTargetPoint);
950 //--------------------------------------------------------------------------------------
952 std::shared_ptr<GeomAPI_Pnt2d> SketchAPI_Sketch::to2D(const std::shared_ptr<GeomAPI_Pnt>& thePoint)
954 FeaturePtr aBase = feature();
955 std::shared_ptr<GeomDataAPI_Point> aC = std::dynamic_pointer_cast<GeomDataAPI_Point>(
956 aBase->attribute(SketchPlugin_Sketch::ORIGIN_ID()));
957 std::shared_ptr<GeomDataAPI_Dir> aNorm = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
958 aBase->attribute(SketchPlugin_Sketch::NORM_ID()));
959 std::shared_ptr<GeomDataAPI_Dir> aX = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
960 aBase->attribute(SketchPlugin_Sketch::DIRX_ID()));
961 std::shared_ptr<GeomAPI_Dir> aY(new GeomAPI_Dir(aNorm->dir()->cross(aX->dir())));
963 return thePoint->to2D(aC->pnt(), aX->dir(), aY);
966 //--------------------------------------------------------------------------------------
968 void SketchAPI_Sketch::dump(ModelHighAPI_Dumper& theDumper) const
970 FeaturePtr aBase = feature();
971 const std::string& aDocName = theDumper.name(aBase->document());
973 AttributeSelectionPtr anExternal = aBase->selection(SketchPlugin_SketchEntity::EXTERNAL_ID());
974 if (anExternal->value()) {
975 theDumper << aBase << " = model.addSketch(" << aDocName <<
976 ", " << anExternal << ")" << std::endl;
978 // Sketch is base on a plane.
979 std::shared_ptr<GeomAPI_Pnt> anOrigin = std::dynamic_pointer_cast<GeomDataAPI_Point>(
980 aBase->attribute(SketchPlugin_Sketch::ORIGIN_ID()))->pnt();
981 std::shared_ptr<GeomAPI_Dir> aNormal = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
982 aBase->attribute(SketchPlugin_Sketch::NORM_ID()))->dir();
983 std::shared_ptr<GeomAPI_Dir> aDirX = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
984 aBase->attribute(SketchPlugin_Sketch::DIRX_ID()))->dir();
986 // Check the plane is coordinate plane
987 std::string aPlaneName = defaultPlane(anOrigin, aNormal, aDirX);
988 if(anExternal->context()) { // checking for selected planes
989 if (!aPlaneName.empty()
990 && anExternal->context()->data()
991 && anExternal->context()->data()->name() == aPlaneName) {
992 // dump sketch based on coordinate plane
993 theDumper << aBase << " = model.addSketch(" << aDocName
994 << ", model.standardPlane(\"" << aPlaneName << "\"))" << std::endl;
995 } else { // some other plane
996 theDumper << aBase << " = model.addSketch(" << aDocName <<
997 ", " << anExternal<< ")" << std::endl;
1000 if (aPlaneName.empty()) {
1001 // needs import additional module
1002 theDumper.importModule("GeomAPI");
1003 // dump plane parameters
1004 const std::string& aSketchName = theDumper.name(aBase);
1005 std::string anOriginName = aSketchName + "_origin";
1006 std::string aNormalName = aSketchName + "_norm";
1007 std::string aDirXName = aSketchName + "_dirx";
1008 // use "\n" instead of std::endl to avoid automatic dumping sketch here
1009 // and then dumplicate dumping it in the next line
1010 theDumper << anOriginName << " = " << anOrigin << "\n"
1011 << aNormalName << " = " << aNormal << "\n"
1012 << aDirXName << " = " << aDirX << "\n";
1013 // dump sketch based on arbitrary plane
1014 theDumper << aBase << " = model.addSketch(" << aDocName << ", GeomAPI_Ax3("
1015 << anOriginName << ", " << aDirXName << ", " << aNormalName << "))" << std::endl;
1017 // dump sketch based on coordinate plane
1018 theDumper << aBase << " = model.addSketch(" << aDocName
1019 << ", model.defaultPlane(\"" << aPlaneName << "\"))" << std::endl;
1024 // dump sketch's subfeatures
1025 CompositeFeaturePtr aCompFeat = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(aBase);
1026 theDumper.processSubs(aCompFeat, true);