1 // Copyright (C) 2014-2020 CEA/DEN, EDF R&D
3 // This library is free software; you can redistribute it and/or
4 // modify it under the terms of the GNU Lesser General Public
5 // License as published by the Free Software Foundation; either
6 // version 2.1 of the License, or (at your option) any later version.
8 // This library is distributed in the hope that it will be useful,
9 // but WITHOUT ANY WARRANTY; without even the implied warranty of
10 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 // Lesser General Public License for more details.
13 // You should have received a copy of the GNU Lesser General Public
14 // License along with this library; if not, write to the Free Software
15 // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 #include "SketchAPI_Sketch.h"
21 //--------------------------------------------------------------------------------------
22 #include <SketchPlugin_Constraint.h>
23 #include <SketchPlugin_ConstraintAngle.h>
24 #include <SketchPlugin_ConstraintCoincidence.h>
25 #include <SketchPlugin_ConstraintCollinear.h>
26 #include <SketchPlugin_ConstraintDistance.h>
27 #include <SketchPlugin_ConstraintDistanceHorizontal.h>
28 #include <SketchPlugin_ConstraintDistanceVertical.h>
29 #include <SketchPlugin_ConstraintEqual.h>
30 #include <SketchPlugin_Fillet.h>
31 #include <SketchPlugin_ConstraintHorizontal.h>
32 #include <SketchPlugin_ConstraintLength.h>
33 #include <SketchPlugin_ConstraintMiddle.h>
34 #include <SketchPlugin_ConstraintMirror.h>
35 #include <SketchPlugin_ConstraintParallel.h>
36 #include <SketchPlugin_ConstraintPerpendicular.h>
37 #include <SketchPlugin_ConstraintRadius.h>
38 #include <SketchPlugin_ConstraintRigid.h>
39 #include <SketchPlugin_CurveFitting.h>
40 #include <SketchPlugin_Trim.h>
41 #include <SketchPlugin_Split.h>
42 #include <SketchPlugin_ConstraintTangent.h>
43 #include <SketchPlugin_ConstraintVertical.h>
44 #include <SketchPlugin_MacroBSpline.h>
45 #include <SketchPlugin_SketchCopy.h>
46 #include <SketchPlugin_Offset.h>
47 #include <SketcherPrs_Tools.h>
48 //--------------------------------------------------------------------------------------
49 #include <ModelAPI_Events.h>
50 #include <ModelAPI_CompositeFeature.h>
51 #include <ModelAPI_ResultConstruction.h>
52 #include <ModelHighAPI_Double.h>
53 #include <ModelHighAPI_Dumper.h>
54 #include <ModelHighAPI_RefAttr.h>
55 #include <ModelHighAPI_Selection.h>
56 #include <ModelHighAPI_Services.h>
57 #include <ModelHighAPI_Tools.h>
58 //--------------------------------------------------------------------------------------
59 #include "SketchAPI_Arc.h"
60 #include "SketchAPI_BSpline.h"
61 #include "SketchAPI_Circle.h"
62 #include "SketchAPI_Ellipse.h"
63 #include "SketchAPI_EllipticArc.h"
64 #include "SketchAPI_IntersectionPoint.h"
65 #include "SketchAPI_Line.h"
66 #include "SketchAPI_MacroArc.h"
67 #include "SketchAPI_MacroCircle.h"
68 #include "SketchAPI_MacroEllipse.h"
69 #include "SketchAPI_MacroEllipticArc.h"
70 #include "SketchAPI_Mirror.h"
71 #include "SketchAPI_Offset.h"
72 #include "SketchAPI_Point.h"
73 #include "SketchAPI_Projection.h"
74 #include "SketchAPI_Rectangle.h"
75 #include "SketchAPI_Rotation.h"
76 #include "SketchAPI_Translation.h"
77 //--------------------------------------------------------------------------------------
78 #include <GeomAPI_Curve.h>
79 #include <GeomAPI_Dir2d.h>
80 #include <GeomAPI_PlanarEdges.h>
81 #include <GeomAPI_ShapeExplorer.h>
82 #include <GeomAPI_XY.h>
83 #include <GeomAlgoAPI_SketchBuilder.h>
87 //--------------------------------------------------------------------------------------
88 SketchAPI_Sketch::SketchAPI_Sketch(
89 const std::shared_ptr<ModelAPI_Feature> & theFeature)
90 : ModelHighAPI_Interface(theFeature)
95 SketchAPI_Sketch::SketchAPI_Sketch(
96 const std::shared_ptr<ModelAPI_Feature> & theFeature,
97 const std::shared_ptr<GeomAPI_Ax3> & thePlane)
98 : ModelHighAPI_Interface(theFeature)
105 SketchAPI_Sketch::SketchAPI_Sketch(
106 const std::shared_ptr<ModelAPI_Feature> & theFeature,
107 const ModelHighAPI_Selection & theExternal)
108 : ModelHighAPI_Interface(theFeature)
111 setExternal(theExternal);
115 SketchAPI_Sketch::SketchAPI_Sketch(
116 const std::shared_ptr<ModelAPI_Feature> & theFeature,
117 std::shared_ptr<ModelAPI_Object> thePlaneObject)
118 : ModelHighAPI_Interface(theFeature)
121 setExternal(thePlaneObject);
125 SketchAPI_Sketch::~SketchAPI_Sketch()
130 //--------------------------------------------------------------------------------------
131 std::shared_ptr<ModelAPI_CompositeFeature> SketchAPI_Sketch::compositeFeature() const
133 return std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(feature());
136 //--------------------------------------------------------------------------------------
137 void SketchAPI_Sketch::setPlane(const std::shared_ptr<GeomAPI_Ax3> & thePlane)
139 fillAttribute(thePlane->origin(), myorigin);
140 fillAttribute(thePlane->dirX(), mydirX);
141 fillAttribute(thePlane->normal(), mynormal);
146 void SketchAPI_Sketch::setPlane(const ModelHighAPI_Selection & thePlane,
147 bool theRemoveExternalDependency)
149 FeaturePtr aSketch = feature();
151 DocumentPtr aDoc = aSketch->document();
152 bool useVisible = false;
153 FeaturePtr aCurFeatureBefore = aDoc->currentFeature(useVisible);
154 aDoc->setCurrentFeature(aSketch, useVisible);
156 if (theRemoveExternalDependency)
157 aSketch->customAction(SketchPlugin_Sketch::ACTION_REMOVE_EXTERNAL());
159 setExternal(thePlane);
161 aDoc->setCurrentFeature(aCurFeatureBefore, useVisible);
164 //--------------------------------------------------------------------------------------
165 void SketchAPI_Sketch::setExternal(const ModelHighAPI_Selection & theExternal)
167 fillAttribute(theExternal, myexternal);
172 void SketchAPI_Sketch::setExternal(std::shared_ptr<ModelAPI_Object> thePlaneObject)
174 ResultPtr aRes = std::dynamic_pointer_cast<ModelAPI_Result>(thePlaneObject);
175 ModelHighAPI_Selection aSel(aRes);
179 //--------------------------------------------------------------------------------------
180 void SketchAPI_Sketch::setValue(
181 const std::shared_ptr<ModelHighAPI_Interface> & theConstraint,
182 const ModelHighAPI_Double & theValue)
184 fillAttribute(theValue, theConstraint->feature()->real(SketchPlugin_Constraint::VALUE()));
186 // theConstraint->execute();
189 //--------------------------------------------------------------------------------------
190 std::list<ModelHighAPI_Selection> SketchAPI_Sketch::selectFace() const
192 const_cast<SketchAPI_Sketch*>(this)->execute();
194 std::list<ModelHighAPI_Selection> aSelectionList;
196 ResultConstructionPtr aResultConstruction =
197 std::dynamic_pointer_cast<ModelAPI_ResultConstruction>(feature()->firstResult());
198 if (aResultConstruction.get() == NULL)
199 return aSelectionList;
201 for (int anIndex = 0; anIndex < aResultConstruction->facesNum(); ++anIndex) {
202 aSelectionList.push_back(
203 ModelHighAPI_Selection(aResultConstruction,
204 aResultConstruction->face(anIndex)));
207 return aSelectionList;
210 //--------------------------------------------------------------------------------------
211 SketchPtr addSketch(const std::shared_ptr<ModelAPI_Document> & thePart,
212 const std::shared_ptr<GeomAPI_Ax3> & thePlane)
214 std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(SketchAPI_Sketch::ID());
215 return SketchPtr(new SketchAPI_Sketch(aFeature, thePlane));
218 SketchPtr addSketch(const std::shared_ptr<ModelAPI_Document> & thePart,
219 const ModelHighAPI_Selection & theExternal)
221 std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(SketchAPI_Sketch::ID());
222 return SketchPtr(new SketchAPI_Sketch(aFeature, theExternal));
225 SketchPtr addSketch(const std::shared_ptr<ModelAPI_Document> & thePart,
226 const std::wstring & theExternalName)
228 std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(SketchAPI_Sketch::ID());
230 new SketchAPI_Sketch(aFeature, ModelHighAPI_Selection("FACE", theExternalName)));
233 SketchPtr addSketch(const std::shared_ptr<ModelAPI_Document> & thePart,
234 std::shared_ptr<ModelAPI_Object> thePlaneObject)
236 std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(SketchAPI_Sketch::ID());
237 return SketchPtr(new SketchAPI_Sketch(aFeature, thePlaneObject));
240 //--------------------------------------------------------------------------------------
241 SketchPtr copySketch(const std::shared_ptr<ModelAPI_Document> & thePart,
242 const SketchPtr & theSketch)
244 FeaturePtr aCopyer = thePart->addFeature(SketchPlugin_SketchCopy::ID());
245 aCopyer->reference(SketchPlugin_SketchCopy::BASE_ID())->setValue(theSketch->feature());
248 FeaturePtr aNewSketch = thePart->nextFeature(aCopyer);
250 // perform removing the macro-feature
251 thePart->removeFeature(aCopyer);
254 return SketchPtr(new SketchAPI_Sketch(aNewSketch));
258 //--------------------------------------------------------------------------------------
259 std::list< std::shared_ptr<SketchAPI_Point> > SketchAPI_Sketch::getFreePoints()
261 std::list< std::shared_ptr<SketchAPI_Point> > aFreePoints;
262 std::list<ResultPtr> aPoints = SketcherPrs_Tools::getFreePoints(compositeFeature());
263 for (std::list<ResultPtr>::iterator anIt = aPoints.begin(); anIt != aPoints.end(); ++anIt) {
264 FeaturePtr aFeature = ModelAPI_Feature::feature(*anIt);
265 PointPtr aPoint(new SketchAPI_Point(aFeature));
266 aFreePoints.push_back(aPoint);
271 //--------------------------------------------------------------------------------------
272 static GeomCurvePtr untrimmedCurve(GeomShapePtr theShape)
274 GeomCurvePtr aCurve(new GeomAPI_Curve(theShape));
275 if (aCurve->isTrimmed())
276 aCurve = aCurve->basisCurve();
280 void SketchAPI_Sketch::changeFacesOrder(
281 const std::list<std::list<ModelHighAPI_Selection> >& theFaces)
283 // collect faces of the sketch
284 ResultConstructionPtr aSketchResult =
285 std::dynamic_pointer_cast<ModelAPI_ResultConstruction>(feature()->lastResult());
286 if (!aSketchResult) {
287 // sketch is nested to a boolean operation, thus, it has no result yet.
288 feature()->execute();
290 std::dynamic_pointer_cast<ModelAPI_ResultConstruction>(feature()->lastResult());
292 std::list<GeomFacePtr> aFaces;
293 int aFacesNum = aSketchResult->facesNum();
294 for (int i = 0; i < aFacesNum; ++i)
295 aFaces.push_back(aSketchResult->face(i));
296 // find new faces order according to the given lists of edges
297 std::list<GeomFacePtr> aNewFacesOrder;
298 std::list<std::list<ModelHighAPI_Selection> >::const_iterator anIt = theFaces.begin();
299 for (; anIt != theFaces.end(); ++anIt) {
300 // find the appropriate face
301 std::list<GeomFacePtr>::iterator aFIt = aFaces.begin();
302 for (; aFIt != aFaces.end(); ++aFIt) {
303 std::list<ModelHighAPI_Selection>::const_iterator aEdgeIt = anIt->begin();
304 GeomAPI_ShapeExplorer aFExp(*aFIt, GeomAPI_Shape::EDGE);
305 for (; aEdgeIt != anIt->end() && aFExp.more(); ++aEdgeIt, aFExp.next()) {
306 ResultPtr aCurRes = aEdgeIt->resultSubShapePair().first;
309 GeomCurvePtr aCurve1 = untrimmedCurve(aCurRes->shape());
310 GeomCurvePtr aCurve2 = untrimmedCurve(aFExp.current());
311 if (!aCurve1->isEqual(aCurve2))
315 if (aEdgeIt == anIt->end() && !aFExp.more()) {
317 aNewFacesOrder.push_back(*aFIt);
323 // place the rest faces at the end of new faces list
325 aNewFacesOrder.insert(aNewFacesOrder.end(), aFaces.begin(), aFaces.end());
326 // update the result of the sketch with the new order of faces
327 aSketchResult->setFacesOrder(aNewFacesOrder);
330 //--------------------------------------------------------------------------------------
331 std::shared_ptr<SketchAPI_Point> SketchAPI_Sketch::addPoint(
332 double theX, double theY)
334 std::shared_ptr<ModelAPI_Feature> aFeature =
335 compositeFeature()->addFeature(SketchPlugin_Point::ID());
336 return PointPtr(new SketchAPI_Point(aFeature, theX, theY));
338 std::shared_ptr<SketchAPI_Point> SketchAPI_Sketch::addPoint(
339 const std::shared_ptr<GeomAPI_Pnt2d> & thePoint)
341 std::shared_ptr<ModelAPI_Feature> aFeature =
342 compositeFeature()->addFeature(SketchPlugin_Point::ID());
343 return PointPtr(new SketchAPI_Point(aFeature, thePoint));
345 std::shared_ptr<SketchAPI_Point>
346 SketchAPI_Sketch::addPoint(const ModelHighAPI_Selection & theExternal)
348 std::shared_ptr<ModelAPI_Feature> aFeature =
349 compositeFeature()->addFeature(SketchPlugin_Point::ID());
350 return PointPtr(new SketchAPI_Point(aFeature, theExternal));
352 std::shared_ptr<SketchAPI_Point> SketchAPI_Sketch::addPoint(const std::wstring & theExternalName)
354 std::shared_ptr<ModelAPI_Feature> aFeature =
355 compositeFeature()->addFeature(SketchPlugin_Point::ID());
356 return PointPtr(new SketchAPI_Point(aFeature, theExternalName));
359 //--------------------------------------------------------------------------------------
360 std::shared_ptr<SketchAPI_IntersectionPoint> SketchAPI_Sketch::addIntersectionPoint(
361 const ModelHighAPI_Selection & theExternal,
364 std::shared_ptr<ModelAPI_Feature> aFeature =
365 compositeFeature()->addFeature(SketchPlugin_IntersectionPoint::ID());
366 IntersectionPointPtr anIntersection(new SketchAPI_IntersectionPoint(aFeature, theExternal));
367 anIntersection->setIncludeToResult(theKeepResult);
368 return anIntersection;
370 std::shared_ptr<SketchAPI_IntersectionPoint> SketchAPI_Sketch::addIntersectionPoint(
371 const std::wstring & theExternalName,
374 std::shared_ptr<ModelAPI_Feature> aFeature =
375 compositeFeature()->addFeature(SketchPlugin_IntersectionPoint::ID());
376 IntersectionPointPtr anIntersection(new SketchAPI_IntersectionPoint(aFeature, theExternalName));
377 anIntersection->setIncludeToResult(theKeepResult);
378 return anIntersection;
381 //--------------------------------------------------------------------------------------
382 std::shared_ptr<SketchAPI_Line> SketchAPI_Sketch::addLine(double theX1, double theY1,
383 double theX2, double theY2)
385 std::shared_ptr<ModelAPI_Feature> aFeature =
386 compositeFeature()->addFeature(SketchPlugin_Line::ID());
387 return LinePtr(new SketchAPI_Line(aFeature, theX1, theY1, theX2, theY2));
389 std::shared_ptr<SketchAPI_Line> SketchAPI_Sketch::addLine(
390 const std::shared_ptr<GeomAPI_Pnt2d> & theStartPoint,
391 const std::shared_ptr<GeomAPI_Pnt2d> & theEndPoint)
393 std::shared_ptr<ModelAPI_Feature> aFeature =
394 compositeFeature()->addFeature(SketchPlugin_Line::ID());
395 return LinePtr(new SketchAPI_Line(aFeature, theStartPoint, theEndPoint));
397 std::shared_ptr<SketchAPI_Line>
398 SketchAPI_Sketch::addLine(const ModelHighAPI_Selection & theExternal)
400 std::shared_ptr<ModelAPI_Feature> aFeature =
401 compositeFeature()->addFeature(SketchPlugin_Line::ID());
402 return LinePtr(new SketchAPI_Line(aFeature, theExternal));
404 std::shared_ptr<SketchAPI_Line> SketchAPI_Sketch::addLine(const std::wstring & theExternalName)
406 std::shared_ptr<ModelAPI_Feature> aFeature =
407 compositeFeature()->addFeature(SketchPlugin_Line::ID());
408 return LinePtr(new SketchAPI_Line(aFeature, theExternalName));
411 //--------------------------------------------------------------------------------------
412 std::shared_ptr<SketchAPI_Rectangle> SketchAPI_Sketch::addRectangle(double theX1, double theY1,
413 double theX2, double theY2)
415 std::shared_ptr<ModelAPI_Feature> aFeature =
416 compositeFeature()->addFeature(SketchAPI_Rectangle::ID());
417 return RectanglePtr(new SketchAPI_Rectangle(aFeature, theX1, theY1, theX2, theY2));
419 std::shared_ptr<SketchAPI_Rectangle> SketchAPI_Sketch::addRectangle(
420 const std::shared_ptr<GeomAPI_Pnt2d> & theStartPoint,
421 const std::shared_ptr<GeomAPI_Pnt2d> & theEndPoint)
423 std::shared_ptr<ModelAPI_Feature> aFeature =
424 compositeFeature()->addFeature(SketchAPI_Rectangle::ID());
425 return RectanglePtr(new SketchAPI_Rectangle(aFeature, theStartPoint, theEndPoint));
428 std::shared_ptr<SketchAPI_Rectangle> SketchAPI_Sketch::addRectangle(
429 double theX1, double theY1, double theX2, double theY2, bool isFirstPointCenter)
431 std::shared_ptr<ModelAPI_Feature> aFeature =
432 compositeFeature()->addFeature(SketchAPI_Rectangle::ID());
433 return RectanglePtr(new SketchAPI_Rectangle(aFeature, theX1, theY1, theX2, theY2, isFirstPointCenter));
435 std::shared_ptr<SketchAPI_Rectangle> SketchAPI_Sketch::addRectangle(
436 const std::shared_ptr<GeomAPI_Pnt2d> & theFirstPoint,
437 const std::shared_ptr<GeomAPI_Pnt2d> & theEndPoint, bool isFirstPointCenter)
439 std::shared_ptr<ModelAPI_Feature> aFeature =
440 compositeFeature()->addFeature(SketchAPI_Rectangle::ID());
441 return RectanglePtr(new SketchAPI_Rectangle(aFeature, theFirstPoint, theEndPoint, isFirstPointCenter));
444 //--------------------------------------------------------------------------------------
445 std::shared_ptr<SketchAPI_Circle> SketchAPI_Sketch::addCircle(double theCenterX,
449 std::shared_ptr<ModelAPI_Feature> aFeature =
450 compositeFeature()->addFeature(SketchPlugin_Circle::ID());
451 return CirclePtr(new SketchAPI_Circle(aFeature, theCenterX, theCenterY, theRadius));
454 std::shared_ptr<SketchAPI_Circle> SketchAPI_Sketch::addCircle(
455 const std::shared_ptr<GeomAPI_Pnt2d>& theCenter,
458 std::shared_ptr<ModelAPI_Feature> aFeature =
459 compositeFeature()->addFeature(SketchPlugin_Circle::ID());
460 return CirclePtr(new SketchAPI_Circle(aFeature, theCenter, theRadius));
463 std::shared_ptr<SketchAPI_MacroCircle> SketchAPI_Sketch::addCircle(double theCenterX,
468 std::shared_ptr<ModelAPI_Feature> aFeature =
469 compositeFeature()->addFeature(SketchPlugin_MacroCircle::ID());
470 return MacroCirclePtr(new SketchAPI_MacroCircle(aFeature, theCenterX, theCenterY,
471 thePassedX, thePassedY));
474 std::shared_ptr<SketchAPI_MacroCircle> SketchAPI_Sketch::addCircle(
475 const std::shared_ptr<GeomAPI_Pnt2d>& theCenterPoint,
476 const std::shared_ptr<GeomAPI_Pnt2d>& thePassedPoint)
478 std::shared_ptr<ModelAPI_Feature> aFeature =
479 compositeFeature()->addFeature(SketchPlugin_MacroCircle::ID());
480 return MacroCirclePtr(new SketchAPI_MacroCircle(aFeature, theCenterPoint, thePassedPoint));
483 std::shared_ptr<SketchAPI_MacroCircle> SketchAPI_Sketch::addCircle(double theX1, double theY1,
484 double theX2, double theY2,
485 double theX3, double theY3)
487 std::shared_ptr<ModelAPI_Feature> aFeature =
488 compositeFeature()->addFeature(SketchPlugin_MacroCircle::ID());
489 return MacroCirclePtr(new SketchAPI_MacroCircle(aFeature, theX1, theY1,
494 std::shared_ptr<SketchAPI_MacroCircle> SketchAPI_Sketch::addCircle(
495 const std::shared_ptr<GeomAPI_Pnt2d>& thePoint1,
496 const std::shared_ptr<GeomAPI_Pnt2d>& thePoint2,
497 const std::shared_ptr<GeomAPI_Pnt2d>& thePoint3)
499 std::shared_ptr<ModelAPI_Feature> aFeature =
500 compositeFeature()->addFeature(SketchPlugin_MacroCircle::ID());
501 return MacroCirclePtr(new SketchAPI_MacroCircle(aFeature, thePoint1, thePoint2, thePoint3));
504 std::shared_ptr<SketchAPI_Circle>
505 SketchAPI_Sketch::addCircle(const ModelHighAPI_Selection & theExternal)
507 std::shared_ptr<ModelAPI_Feature> aFeature =
508 compositeFeature()->addFeature(SketchPlugin_Circle::ID());
509 return CirclePtr(new SketchAPI_Circle(aFeature, theExternal));
512 std::shared_ptr<SketchAPI_Circle> SketchAPI_Sketch::addCircle(const std::wstring & theExternalName)
514 std::shared_ptr<ModelAPI_Feature> aFeature =
515 compositeFeature()->addFeature(SketchPlugin_Circle::ID());
516 return CirclePtr(new SketchAPI_Circle(aFeature, theExternalName));
519 //--------------------------------------------------------------------------------------
520 std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(double theCenterX, double theCenterY,
521 double theStartX, double theStartY,
522 double theEndX, double theEndY,
525 std::shared_ptr<ModelAPI_Feature> aFeature =
526 compositeFeature()->addFeature(SketchPlugin_Arc::ID());
527 return ArcPtr(new SketchAPI_Arc(aFeature,
528 theCenterX, theCenterY,
529 theStartX, theStartY,
534 std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(
535 const std::shared_ptr<GeomAPI_Pnt2d>& theCenter,
536 const std::shared_ptr<GeomAPI_Pnt2d>& theStart,
537 const std::shared_ptr<GeomAPI_Pnt2d>& theEnd,
540 std::shared_ptr<ModelAPI_Feature> aFeature =
541 compositeFeature()->addFeature(SketchPlugin_Arc::ID());
542 return ArcPtr(new SketchAPI_Arc(aFeature, theCenter, theStart, theEnd, theInversed));
545 std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(double theStartX, double theStartY,
546 double theEndX, double theEndY,
547 double thePassedX, double thePassedY)
549 std::shared_ptr<ModelAPI_Feature> aFeature =
550 compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
551 return MacroArcPtr(new SketchAPI_MacroArc(aFeature,
552 theStartX, theStartY,
554 thePassedX, thePassedY));
557 std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(
558 const std::shared_ptr<GeomAPI_Pnt2d>& theStart,
559 const std::shared_ptr<GeomAPI_Pnt2d>& theEnd,
560 const std::shared_ptr<GeomAPI_Pnt2d>& thePassed)
562 std::shared_ptr<ModelAPI_Feature> aFeature =
563 compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
564 return MacroArcPtr(new SketchAPI_MacroArc(aFeature, theStart, theEnd, thePassed));
567 std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(
568 const ModelHighAPI_RefAttr& theTangentPoint,
569 double theEndX, double theEndY,
573 std::shared_ptr<ModelAPI_Feature> aFeature =
574 compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
575 MacroArcPtr aMacroArc(new SketchAPI_MacroArc(aFeature));
577 aMacroArc->setByTransversal(theTangentPoint, theEndX, theEndY, theInversed);
579 aMacroArc->setByTangent(theTangentPoint, theEndX, theEndY, theInversed);
583 std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(
584 const ModelHighAPI_RefAttr& theTangentPoint,
585 const std::shared_ptr<GeomAPI_Pnt2d>& theEnd,
589 std::shared_ptr<ModelAPI_Feature> aFeature =
590 compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
591 MacroArcPtr aMacroArc(new SketchAPI_MacroArc(aFeature));
593 aMacroArc->setByTransversal(theTangentPoint, theEnd, theInversed);
595 aMacroArc->setByTangent(theTangentPoint, theEnd, theInversed);
599 std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(const ModelHighAPI_Selection & theExternal)
601 std::shared_ptr<ModelAPI_Feature> aFeature =
602 compositeFeature()->addFeature(SketchPlugin_Arc::ID());
603 return ArcPtr(new SketchAPI_Arc(aFeature, theExternal));
606 std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(const std::wstring & theExternalName)
608 std::shared_ptr<ModelAPI_Feature> aFeature =
609 compositeFeature()->addFeature(SketchPlugin_Arc::ID());
610 return ArcPtr(new SketchAPI_Arc(aFeature, theExternalName));
613 //--------------------------------------------------------------------------------------
614 std::shared_ptr<SketchAPI_Ellipse> SketchAPI_Sketch::addEllipse(
615 double theCenterX, double theCenterY,
616 double theFocusX, double theFocusY,
617 double theMinorRadius)
619 std::shared_ptr<ModelAPI_Feature> aFeature =
620 compositeFeature()->addFeature(SketchPlugin_Ellipse::ID());
621 return EllipsePtr(new SketchAPI_Ellipse(aFeature,
622 theCenterX, theCenterY, theFocusX, theFocusY, theMinorRadius));
625 std::shared_ptr<SketchAPI_Ellipse> SketchAPI_Sketch::addEllipse(
626 const std::shared_ptr<GeomAPI_Pnt2d>& theCenter,
627 const std::shared_ptr<GeomAPI_Pnt2d>& theFocus,
628 double theMinorRadius)
630 std::shared_ptr<ModelAPI_Feature> aFeature =
631 compositeFeature()->addFeature(SketchPlugin_Ellipse::ID());
632 return EllipsePtr(new SketchAPI_Ellipse(aFeature, theCenter, theFocus, theMinorRadius));
635 std::shared_ptr<SketchAPI_MacroEllipse> SketchAPI_Sketch::addEllipse(
636 double thePoint1X, double thePoint1Y,
637 double thePoint2X, double thePoint2Y,
638 double thePassedX, double thePassedY,
641 std::shared_ptr<ModelAPI_Feature> aFeature =
642 compositeFeature()->addFeature(SketchPlugin_MacroEllipse::ID());
643 return MacroEllipsePtr(new SketchAPI_MacroEllipse(aFeature,
644 thePoint1X, thePoint1Y, thePoint2X, thePoint2Y, thePassedX, thePassedY, isPoint1Center));
647 std::shared_ptr<SketchAPI_MacroEllipse> SketchAPI_Sketch::addEllipse(
648 const PointOrReference& thePoint1,
649 const PointOrReference& thePoint2,
650 const PointOrReference& thePassedPoint,
653 std::shared_ptr<ModelAPI_Feature> aFeature =
654 compositeFeature()->addFeature(SketchPlugin_MacroEllipse::ID());
655 MacroEllipsePtr anEllipse;
656 if (thePoint1.second.isEmpty() &&
657 thePoint2.second.isEmpty() &&
658 thePassedPoint.second.isEmpty()) {
659 anEllipse.reset(new SketchAPI_MacroEllipse(aFeature,
660 thePoint1.first, thePoint2.first, thePassedPoint.first, isPoint1Center));
663 anEllipse.reset(new SketchAPI_MacroEllipse(aFeature,
664 thePoint1.first, thePoint1.second,
665 thePoint2.first, thePoint2.second,
666 thePassedPoint.first, thePassedPoint.second,
672 std::shared_ptr<SketchAPI_Ellipse> SketchAPI_Sketch::addEllipse(
673 const ModelHighAPI_Selection & theExternal)
675 std::shared_ptr<ModelAPI_Feature> aFeature =
676 compositeFeature()->addFeature(SketchPlugin_Ellipse::ID());
677 return EllipsePtr(new SketchAPI_Ellipse(aFeature, theExternal));
680 std::shared_ptr<SketchAPI_Ellipse> SketchAPI_Sketch::addEllipse(
681 const std::wstring & theExternalName)
683 std::shared_ptr<ModelAPI_Feature> aFeature =
684 compositeFeature()->addFeature(SketchPlugin_Ellipse::ID());
685 return EllipsePtr(new SketchAPI_Ellipse(aFeature, theExternalName));
688 //--------------------------------------------------------------------------------------
689 std::shared_ptr<SketchAPI_EllipticArc> SketchAPI_Sketch::addEllipticArc(
690 double theCenterX, double theCenterY,
691 double theFocusX, double theFocusY,
692 double theStartX, double theStartY,
693 double theEndX, double theEndY,
696 std::shared_ptr<ModelAPI_Feature> aFeature =
697 compositeFeature()->addFeature(SketchPlugin_EllipticArc::ID());
698 return EllipticArcPtr(new SketchAPI_EllipticArc(aFeature,
699 theCenterX, theCenterY,
700 theFocusX, theFocusY,
701 theStartX, theStartY,
706 std::shared_ptr<SketchAPI_MacroEllipticArc> SketchAPI_Sketch::addEllipticArc(
707 const PointOrReference& theCenter,
708 const PointOrReference& theMajorAxisPoint,
709 const PointOrReference& theStartPoint,
710 const PointOrReference& theEndPoint,
713 std::shared_ptr<ModelAPI_Feature> aFeature =
714 compositeFeature()->addFeature(SketchPlugin_MacroEllipticArc::ID());
715 return MacroEllipticArcPtr(new SketchAPI_MacroEllipticArc(aFeature,
716 theCenter.first, theCenter.second,
717 theMajorAxisPoint.first, theMajorAxisPoint.second,
718 theStartPoint.first, theStartPoint.second,
719 theEndPoint.first, theEndPoint.second,
723 std::shared_ptr<SketchAPI_EllipticArc> SketchAPI_Sketch::addEllipticArc(
724 const ModelHighAPI_Selection & theExternal)
726 std::shared_ptr<ModelAPI_Feature> aFeature =
727 compositeFeature()->addFeature(SketchPlugin_EllipticArc::ID());
728 return EllipticArcPtr(new SketchAPI_EllipticArc(aFeature, theExternal));
731 std::shared_ptr<SketchAPI_EllipticArc> SketchAPI_Sketch::addEllipticArc(
732 const std::wstring & theExternalName)
734 std::shared_ptr<ModelAPI_Feature> aFeature =
735 compositeFeature()->addFeature(SketchPlugin_EllipticArc::ID());
736 return EllipticArcPtr(new SketchAPI_EllipticArc(aFeature, theExternalName));
739 //--------------------------------------------------------------------------------------
741 std::shared_ptr<SketchAPI_BSpline> SketchAPI_Sketch::addSpline(
742 const ModelHighAPI_Selection & external,
744 const std::list<PointOrReference>& poles,
745 const std::list<ModelHighAPI_Double>& weights,
746 const std::list<ModelHighAPI_Double>& knots,
747 const std::list<ModelHighAPI_Integer>& multiplicities,
750 // split poles and references to other shapes
751 bool hasReference = false;
752 std::list<GeomPnt2dPtr> aPoints;
753 std::list<ModelHighAPI_RefAttr> aReferences;
754 for (std::list<PointOrReference>::const_iterator it = poles.begin(); it != poles.end(); ++it) {
755 aPoints.push_back(it->first);
756 aReferences.push_back(it->second);
757 if (!it->second.isEmpty())
762 CompositeFeaturePtr aSketch = compositeFeature();
764 // use macro-feature to create coincidences to referred features
765 FeaturePtr aMacroFeature = aSketch->addFeature(
766 periodic ? SketchPlugin_MacroBSplinePeriodic::ID() : SketchPlugin_MacroBSpline::ID());
767 AttributePoint2DArrayPtr aPolesAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2DArray>(
768 aMacroFeature->attribute(SketchPlugin_MacroBSpline::POLES_ID()));
769 AttributeDoubleArrayPtr aWeightsAttr =
770 aMacroFeature->data()->realArray(SketchPlugin_MacroBSpline::WEIGHTS_ID());
771 AttributeRefAttrListPtr aPolesRefAttr =
772 aMacroFeature->data()->refattrlist(SketchPlugin_MacroBSpline::REF_POLES_ID());
773 // always generate a control polygon to apply coincidences correctly
774 aMacroFeature->boolean(SketchPlugin_MacroBSpline::CONTROL_POLYGON_ID())->setValue(true);
775 // initialize B-spline attributes
776 fillAttribute(aPoints, aPolesAttr);
778 fillAttribute(std::list<ModelHighAPI_Double>(poles.size(), 1.0), aWeightsAttr);
780 fillAttribute(weights, aWeightsAttr);
781 fillAttribute(aReferences, aPolesRefAttr);
782 apply(); // to kill macro-feature
784 // find created B-spline feature
785 const std::string& aKindToFind =
786 periodic ? SketchPlugin_BSplinePeriodic::ID() : SketchPlugin_BSpline::ID();
787 int aNbSubs = aSketch->numberOfSubs();
788 for (int anIndex = aNbSubs - 1; anIndex >= 0; --anIndex) {
789 FeaturePtr aFeature = aSketch->subFeature(anIndex);
790 if (aFeature->getKind() == aKindToFind) {
791 aBSpline.reset(periodic ? new SketchAPI_BSplinePeriodic(aFeature)
792 : new SketchAPI_BSpline(aFeature));
799 // compute B-spline by parameters
800 FeaturePtr aFeature = aSketch->addFeature(
801 periodic ? SketchPlugin_BSplinePeriodic::ID() : SketchPlugin_BSpline::ID());
803 aBSpline.reset(periodic ? new SketchAPI_BSplinePeriodic(aFeature)
804 : new SketchAPI_BSpline(aFeature));
805 if (external.variantType() != ModelHighAPI_Selection::VT_Empty)
806 aBSpline->setByExternal(external);
807 else if (knots.empty() || multiplicities.empty())
808 aBSpline->setByDegreePolesAndWeights(degree, aPoints, weights);
810 aBSpline->setByParameters(degree, aPoints, weights, knots, multiplicities);
815 //--------------------------------------------------------------------------------------
816 static std::shared_ptr<SketchAPI_BSpline> buildInterpolation(
817 const CompositeFeaturePtr& theSketch,
818 const FeaturePtr& theCurveFittingFeature,
819 const std::list<ModelHighAPI_RefAttr>& points,
823 AttributeBooleanPtr aPeriodicAttr =
824 theCurveFittingFeature->boolean(SketchPlugin_CurveFitting::PERIODIC_ID());
825 fillAttribute(periodic, aPeriodicAttr);
826 AttributeBooleanPtr aClosedAttr =
827 theCurveFittingFeature->boolean(SketchPlugin_CurveFitting::CLOSED_ID());
828 fillAttribute(closed, aClosedAttr);
829 AttributeRefAttrListPtr aPointsAttr =
830 theCurveFittingFeature->refattrlist(SketchPlugin_CurveFitting::POINTS_ID());
831 fillAttribute(points, aPointsAttr);
832 apply(); // to execute and kill the macro-feature
834 // find created B-spline feature
836 const std::string& aKindToFind =
837 periodic ? SketchPlugin_BSplinePeriodic::ID() : SketchPlugin_BSpline::ID();
838 int aNbSubs = theSketch->numberOfSubs();
839 for (int anIndex = aNbSubs - 1; anIndex >= 0; --anIndex) {
840 FeaturePtr aFeature = theSketch->subFeature(anIndex);
841 if (aFeature->getKind() == aKindToFind) {
842 aBSpline.reset(periodic ? new SketchAPI_BSplinePeriodic(aFeature)
843 : new SketchAPI_BSpline(aFeature));
851 std::shared_ptr<SketchAPI_BSpline> SketchAPI_Sketch::addInterpolation(
852 const std::list<ModelHighAPI_RefAttr>& points,
856 CompositeFeaturePtr aSketch = compositeFeature();
857 FeaturePtr anInterpFeature = aSketch->addFeature(SketchPlugin_CurveFitting::ID());
858 anInterpFeature->string(SketchPlugin_CurveFitting::TYPE_ID())
859 ->setValue(SketchPlugin_CurveFitting::TYPE_INTERPOLATION_ID());
860 return buildInterpolation(aSketch, anInterpFeature, points, periodic, closed);
863 std::shared_ptr<SketchAPI_BSpline> SketchAPI_Sketch::addApproximation(
864 const std::list<ModelHighAPI_RefAttr>& points,
865 const ModelHighAPI_Double& precision,
869 CompositeFeaturePtr aSketch = compositeFeature();
870 FeaturePtr anInterpFeature = aSketch->addFeature(SketchPlugin_CurveFitting::ID());
871 anInterpFeature->string(SketchPlugin_CurveFitting::TYPE_ID())
872 ->setValue(SketchPlugin_CurveFitting::TYPE_APPROXIMATION_ID());
873 fillAttribute(precision, anInterpFeature->real(SketchPlugin_CurveFitting::PRECISION_ID()));
874 return buildInterpolation(aSketch, anInterpFeature, points, periodic, closed);
877 //--------------------------------------------------------------------------------------
878 std::shared_ptr<SketchAPI_Projection> SketchAPI_Sketch::addProjection(
879 const ModelHighAPI_Selection & theExternalFeature,
881 bool keepRefToOriginal)
883 std::shared_ptr<ModelAPI_Feature> aFeature =
884 compositeFeature()->addFeature(SketchPlugin_Projection::ID());
885 ProjectionPtr aProjection(new SketchAPI_Projection(aFeature));
886 aProjection->setIncludeToResult(keepResult);
887 aProjection->setKeepReferenceToOriginal(keepRefToOriginal);
888 aProjection->setExternalFeature(theExternalFeature);
892 //--------------------------------------------------------------------------------------
893 std::shared_ptr<SketchAPI_Mirror> SketchAPI_Sketch::addMirror(
894 const ModelHighAPI_RefAttr & theMirrorLine,
895 const std::list<std::shared_ptr<ModelAPI_Object> > & theObjects)
897 std::shared_ptr<ModelAPI_Feature> aFeature =
898 compositeFeature()->addFeature(SketchPlugin_ConstraintMirror::ID());
899 return MirrorPtr(new SketchAPI_Mirror(aFeature, theMirrorLine, theObjects));
902 //--------------------------------------------------------------------------------------
903 std::shared_ptr<SketchAPI_Offset> SketchAPI_Sketch::addOffset(
904 const std::list<std::shared_ptr<ModelAPI_Object> > & theObjects,
905 const ModelHighAPI_Double & theValue,
906 const bool theReversed)
908 std::shared_ptr<ModelAPI_Feature> aFeature =
909 compositeFeature()->addFeature(SketchPlugin_Offset::ID());
910 return OffsetPtr(new SketchAPI_Offset(aFeature, theObjects, theValue, theReversed));
913 //--------------------------------------------------------------------------------------
914 std::shared_ptr<SketchAPI_Translation> SketchAPI_Sketch::addTranslation(
915 const std::list<std::shared_ptr<ModelAPI_Object> > & theObjects,
916 const ModelHighAPI_RefAttr & thePoint1,
917 const ModelHighAPI_RefAttr & thePoint2,
918 const ModelHighAPI_Integer & theNumberOfObjects,
921 std::shared_ptr<ModelAPI_Feature> aFeature =
922 compositeFeature()->addFeature(SketchPlugin_MultiTranslation::ID());
923 return TranslationPtr(new SketchAPI_Translation(aFeature, theObjects, thePoint1,
924 thePoint2, theNumberOfObjects, theFullValue));
927 //--------------------------------------------------------------------------------------
928 std::shared_ptr<SketchAPI_Rotation> SketchAPI_Sketch::addRotation(
929 const std::list<std::shared_ptr<ModelAPI_Object> > & theObjects,
930 const ModelHighAPI_RefAttr & theCenter,
931 const ModelHighAPI_Double & theAngle,
932 const ModelHighAPI_Integer & theNumberOfObjects,
936 std::shared_ptr<ModelAPI_Feature> aFeature =
937 compositeFeature()->addFeature(SketchPlugin_MultiRotation::ID());
939 new SketchAPI_Rotation(aFeature, theObjects, theCenter,
940 theAngle, theNumberOfObjects, theFullValue, theReversed));
943 //--------------------------------------------------------------------------------------
944 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::addSplit(
945 const ModelHighAPI_Reference& theFeature,
946 const std::shared_ptr<GeomAPI_Pnt2d>& thePositionPoint)
948 std::shared_ptr<ModelAPI_Feature> aFeature =
949 compositeFeature()->addFeature(SketchPlugin_Split::ID());
950 fillAttribute(theFeature, aFeature->reference(SketchPlugin_Split::SELECTED_OBJECT()));
952 AttributePtr anAttribute = aFeature->attribute(SketchPlugin_Split::SELECTED_POINT());
953 if (anAttribute->attributeType() == GeomDataAPI_Point2D::typeId()) {
954 AttributePoint2DPtr aPointAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(anAttribute);
955 fillAttribute(thePositionPoint, aPointAttr);
958 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
961 //--------------------------------------------------------------------------------------
962 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::addTrim(
963 const ModelHighAPI_Reference& theFeature,
964 const std::shared_ptr<GeomAPI_Pnt2d>& thePositionPoint)
966 std::shared_ptr<ModelAPI_Feature> aFeature =
967 compositeFeature()->addFeature(SketchPlugin_Trim::ID());
968 fillAttribute(theFeature, aFeature->reference(SketchPlugin_Trim::SELECTED_OBJECT()));
970 AttributePtr anAttribute = aFeature->attribute(SketchPlugin_Trim::SELECTED_POINT());
971 if (anAttribute->attributeType() == GeomDataAPI_Point2D::typeId()) {
972 AttributePoint2DPtr aPointAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(anAttribute);
973 fillAttribute(thePositionPoint, aPointAttr);
976 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
979 //--------------------------------------------------------------------------------------
980 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setAngle(
981 const ModelHighAPI_RefAttr & theLine1,
982 const ModelHighAPI_RefAttr & theLine2,
983 const ModelHighAPI_Double & theValue,
984 const std::string& theType)
986 std::shared_ptr<ModelAPI_Feature> aFeature =
987 compositeFeature()->addFeature(SketchPlugin_ConstraintAngle::ID());
989 const int aVersion = theType.empty() ? SketchPlugin_ConstraintAngle::THE_VERSION_0
990 : SketchPlugin_ConstraintAngle::THE_VERSION_1;
991 fillAttribute(aVersion, aFeature->integer(SketchPlugin_ConstraintAngle::VERSION_ID()));
993 int aType = (int)SketcherPrs_Tools::ANGLE_DIRECT;
994 fillAttribute(aType, aFeature->integer(SketchPlugin_ConstraintAngle::PREV_TYPE_ID()));
995 fillAttribute(aType, aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
997 if (aVersion == SketchPlugin_ConstraintAngle::THE_VERSION_0)
998 fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
1000 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1001 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1003 if (aVersion == SketchPlugin_ConstraintAngle::THE_VERSION_1) {
1004 std::string aTypeLC = theType;
1005 std::transform(aTypeLC.begin(), aTypeLC.end(), aTypeLC.begin(),
1006 [](char c) { return static_cast<char>(::tolower(c)); });
1007 if (aTypeLC == "supplementary")
1008 aType = (int)SketcherPrs_Tools::ANGLE_COMPLEMENTARY;
1009 else if (aTypeLC == "backward")
1010 aType = (int)SketcherPrs_Tools::ANGLE_BACKWARD;
1012 fillAttribute(aType, aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
1013 fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
1016 aFeature->execute();
1017 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1020 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setAngleComplementary(
1021 const ModelHighAPI_RefAttr & theLine1,
1022 const ModelHighAPI_RefAttr & theLine2,
1023 const ModelHighAPI_Double & theValue)
1025 std::shared_ptr<ModelAPI_Feature> aFeature =
1026 compositeFeature()->addFeature(SketchPlugin_ConstraintAngle::ID());
1027 fillAttribute(SketchPlugin_ConstraintAngle::THE_VERSION_0,
1028 aFeature->integer(SketchPlugin_ConstraintAngle::VERSION_ID()));
1029 fillAttribute(SketcherPrs_Tools::ANGLE_COMPLEMENTARY,
1030 aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
1031 fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
1032 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1033 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1034 aFeature->execute();
1035 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1038 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setAngleBackward(
1039 const ModelHighAPI_RefAttr & theLine1,
1040 const ModelHighAPI_RefAttr & theLine2,
1041 const ModelHighAPI_Double & theValue)
1043 std::shared_ptr<ModelAPI_Feature> aFeature =
1044 compositeFeature()->addFeature(SketchPlugin_ConstraintAngle::ID());
1045 fillAttribute(SketchPlugin_ConstraintAngle::THE_VERSION_0,
1046 aFeature->integer(SketchPlugin_ConstraintAngle::VERSION_ID()));
1047 fillAttribute(SketcherPrs_Tools::ANGLE_BACKWARD,
1048 aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
1049 fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
1050 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1051 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1052 aFeature->execute();
1053 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1056 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setCoincident(
1057 const ModelHighAPI_RefAttr & thePoint1,
1058 const ModelHighAPI_RefAttr & thePoint2)
1060 std::shared_ptr<ModelAPI_Feature> aFeature =
1061 compositeFeature()->addFeature(SketchPlugin_ConstraintCoincidence::ID());
1062 fillAttribute(thePoint1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1063 fillAttribute(thePoint2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1064 aFeature->execute();
1065 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1068 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setCollinear(
1069 const ModelHighAPI_RefAttr & theLine1,
1070 const ModelHighAPI_RefAttr & theLine2)
1072 std::shared_ptr<ModelAPI_Feature> aFeature =
1073 compositeFeature()->addFeature(SketchPlugin_ConstraintCollinear::ID());
1074 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1075 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1076 aFeature->execute();
1077 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1080 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setDistance(
1081 const ModelHighAPI_RefAttr & thePoint,
1082 const ModelHighAPI_RefAttr & thePointOrLine,
1083 const ModelHighAPI_Double & theValue,
1086 std::shared_ptr<ModelAPI_Feature> aFeature =
1087 compositeFeature()->addFeature(SketchPlugin_ConstraintDistance::ID());
1088 fillAttribute(thePoint, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1089 fillAttribute(thePointOrLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1090 fillAttribute(theValue, aFeature->real(SketchPlugin_Constraint::VALUE()));
1091 fillAttribute(isSigned, aFeature->boolean(SketchPlugin_ConstraintDistance::SIGNED()));
1092 aFeature->execute();
1093 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1096 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setSignedDistance(
1097 const ModelHighAPI_RefAttr & thePoint,
1098 const ModelHighAPI_RefAttr & thePointOrLine,
1099 const ModelHighAPI_Double & theValue)
1101 return setDistance(thePoint, thePointOrLine, theValue, true);
1104 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setUnsignedDistance(
1105 const ModelHighAPI_RefAttr & thePoint,
1106 const ModelHighAPI_RefAttr & thePointOrLine,
1107 const ModelHighAPI_Double & theValue)
1109 return setDistance(thePoint, thePointOrLine, theValue, false);
1112 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setHorizontalDistance(
1113 const ModelHighAPI_RefAttr & thePoint1,
1114 const ModelHighAPI_RefAttr & thePoint2,
1115 const ModelHighAPI_Double & theValue)
1117 std::shared_ptr<ModelAPI_Feature> aFeature =
1118 compositeFeature()->addFeature(SketchPlugin_ConstraintDistanceHorizontal::ID());
1119 fillAttribute(thePoint1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1120 fillAttribute(thePoint2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1121 fillAttribute(theValue,
1122 aFeature->real(SketchPlugin_ConstraintDistanceAlongDir::DISTANCE_VALUE_ID()));
1123 aFeature->execute();
1124 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1127 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setVerticalDistance(
1128 const ModelHighAPI_RefAttr & thePoint1,
1129 const ModelHighAPI_RefAttr & thePoint2,
1130 const ModelHighAPI_Double & theValue)
1132 std::shared_ptr<ModelAPI_Feature> aFeature =
1133 compositeFeature()->addFeature(SketchPlugin_ConstraintDistanceVertical::ID());
1134 fillAttribute(thePoint1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1135 fillAttribute(thePoint2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1136 fillAttribute(theValue,
1137 aFeature->real(SketchPlugin_ConstraintDistanceAlongDir::DISTANCE_VALUE_ID()));
1138 aFeature->execute();
1139 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1142 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setEqual(
1143 const ModelHighAPI_RefAttr & theObject1,
1144 const ModelHighAPI_RefAttr & theObject2)
1146 std::shared_ptr<ModelAPI_Feature> aFeature =
1147 compositeFeature()->addFeature(SketchPlugin_ConstraintEqual::ID());
1148 fillAttribute(theObject1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1149 fillAttribute(theObject2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1150 aFeature->execute();
1151 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1154 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setFillet(
1155 const ModelHighAPI_RefAttr & thePoint)
1157 std::shared_ptr<ModelAPI_Feature> aFeature =
1158 compositeFeature()->addFeature(SketchPlugin_Fillet::ID());
1159 fillAttribute(thePoint, aFeature->data()->refattr(SketchPlugin_Fillet::FILLET_POINT_ID()));
1160 apply(); // finish operation to remove Fillet feature correcly
1161 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1164 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setFilletWithRadius(
1165 const ModelHighAPI_RefAttr & thePoint,
1166 const ModelHighAPI_Double & theRadius)
1168 CompositeFeaturePtr aSketch = compositeFeature();
1169 int aNbSubs = aSketch->numberOfSubs();
1172 InterfacePtr aFilletFeature = setFillet(thePoint);
1174 // set radius for just created arc
1175 FeaturePtr anArc = aSketch->subFeature(aNbSubs - 1);
1176 if (anArc->getKind() == SketchPlugin_Arc::ID())
1177 setRadius(ModelHighAPI_RefAttr(ObjectPtr(anArc->lastResult())), ModelHighAPI_Double(theRadius));
1179 return aFilletFeature;
1182 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setFixed(
1183 const ModelHighAPI_RefAttr & theObject)
1185 std::shared_ptr<ModelAPI_Feature> aFeature =
1186 compositeFeature()->addFeature(SketchPlugin_ConstraintRigid::ID());
1187 fillAttribute(theObject, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1188 aFeature->execute();
1189 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1192 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setHorizontal(
1193 const ModelHighAPI_RefAttr & theLine)
1195 std::shared_ptr<ModelAPI_Feature> aFeature =
1196 compositeFeature()->addFeature(SketchPlugin_ConstraintHorizontal::ID());
1197 fillAttribute(theLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1198 aFeature->execute();
1199 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1202 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setLength(
1203 const ModelHighAPI_RefAttr & theLine,
1204 const ModelHighAPI_Double & theValue)
1206 std::shared_ptr<ModelAPI_Feature> aFeature =
1207 compositeFeature()->addFeature(SketchPlugin_ConstraintLength::ID());
1208 fillAttribute(theLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1209 fillAttribute(theValue, aFeature->real(SketchPlugin_Constraint::VALUE()));
1210 aFeature->execute();
1211 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1214 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setMiddlePoint(
1215 const ModelHighAPI_RefAttr & thePoint,
1216 const ModelHighAPI_RefAttr & theLine)
1218 std::shared_ptr<ModelAPI_Feature> aFeature =
1219 compositeFeature()->addFeature(SketchPlugin_ConstraintMiddle::ID());
1220 fillAttribute(thePoint, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1221 fillAttribute(theLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1222 aFeature->execute();
1223 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1226 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setParallel(
1227 const ModelHighAPI_RefAttr & theLine1,
1228 const ModelHighAPI_RefAttr & theLine2)
1230 std::shared_ptr<ModelAPI_Feature> aFeature =
1231 compositeFeature()->addFeature(SketchPlugin_ConstraintParallel::ID());
1232 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1233 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1234 aFeature->execute();
1235 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1238 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setPerpendicular(
1239 const ModelHighAPI_RefAttr & theLine1,
1240 const ModelHighAPI_RefAttr & theLine2)
1242 std::shared_ptr<ModelAPI_Feature> aFeature =
1243 compositeFeature()->addFeature(SketchPlugin_ConstraintPerpendicular::ID());
1244 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1245 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1246 aFeature->execute();
1247 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1250 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setRadius(
1251 const ModelHighAPI_RefAttr & theCircleOrArc,
1252 const ModelHighAPI_Double & theValue)
1254 std::shared_ptr<ModelAPI_Feature> aFeature =
1255 compositeFeature()->addFeature(SketchPlugin_ConstraintRadius::ID());
1256 fillAttribute(theCircleOrArc, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1257 fillAttribute(theValue, aFeature->real(SketchPlugin_Constraint::VALUE()));
1258 aFeature->execute();
1259 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1262 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setTangent(
1263 const ModelHighAPI_RefAttr & theLine,
1264 const ModelHighAPI_RefAttr & theCircle)
1266 std::shared_ptr<ModelAPI_Feature> aFeature =
1267 compositeFeature()->addFeature(SketchPlugin_ConstraintTangent::ID());
1268 fillAttribute(theLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1269 fillAttribute(theCircle, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
1270 aFeature->execute();
1271 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1274 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setVertical(
1275 const ModelHighAPI_RefAttr & theLine)
1277 std::shared_ptr<ModelAPI_Feature> aFeature =
1278 compositeFeature()->addFeature(SketchPlugin_ConstraintVertical::ID());
1279 fillAttribute(theLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
1280 aFeature->execute();
1281 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
1284 //--------------------------------------------------------------------------------------
1286 static std::shared_ptr<GeomAPI_Pnt2d> pointCoordinates(const AttributePtr& thePoint)
1288 AttributePoint2DPtr aPnt = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(thePoint);
1289 return aPnt ? aPnt->pnt() : std::shared_ptr<GeomAPI_Pnt2d>();
1292 static std::shared_ptr<GeomAPI_Pnt2d> middlePointOnLine(const FeaturePtr& theFeature)
1294 AttributePoint2DPtr aStartAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
1295 theFeature->attribute(SketchPlugin_Line::START_ID()));
1296 AttributePoint2DPtr aEndAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
1297 theFeature->attribute(SketchPlugin_Line::END_ID()));
1299 if (!aStartAttr || !aEndAttr)
1300 return std::shared_ptr<GeomAPI_Pnt2d>();
1302 std::shared_ptr<GeomAPI_XY> aStartPoint = aStartAttr->pnt()->xy();
1303 std::shared_ptr<GeomAPI_XY> aEndPoint = aEndAttr->pnt()->xy();
1304 return std::shared_ptr<GeomAPI_Pnt2d>(
1305 new GeomAPI_Pnt2d(aStartPoint->added(aEndPoint)->multiplied(0.5)));
1308 static std::shared_ptr<GeomAPI_Pnt2d> pointOnCircle(const FeaturePtr& theFeature)
1310 AttributePoint2DPtr aCenter = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
1311 theFeature->attribute(SketchPlugin_Circle::CENTER_ID()));
1312 AttributeDoublePtr aRadius = theFeature->real(SketchPlugin_Circle::RADIUS_ID());
1314 if (!aCenter || !aRadius)
1315 return std::shared_ptr<GeomAPI_Pnt2d>();
1317 return std::shared_ptr<GeomAPI_Pnt2d>(
1318 new GeomAPI_Pnt2d(aCenter->x() + aRadius->value(), aCenter->y()));
1321 static std::shared_ptr<GeomAPI_Pnt2d> middlePointOnArc(const FeaturePtr& theFeature)
1323 static const double PI = 3.141592653589793238463;
1325 AttributePoint2DPtr aCenterAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
1326 theFeature->attribute(SketchPlugin_Arc::CENTER_ID()));
1327 AttributePoint2DPtr aStartAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
1328 theFeature->attribute(SketchPlugin_Arc::START_ID()));
1329 AttributePoint2DPtr aEndAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
1330 theFeature->attribute(SketchPlugin_Arc::END_ID()));
1332 if (!aCenterAttr || !aStartAttr || !aEndAttr)
1333 return std::shared_ptr<GeomAPI_Pnt2d>();
1335 std::shared_ptr<GeomAPI_Dir2d> aStartDir(new GeomAPI_Dir2d(
1336 aStartAttr->x() - aCenterAttr->x(), aStartAttr->y() - aCenterAttr->y()));
1337 std::shared_ptr<GeomAPI_Dir2d> aEndDir(new GeomAPI_Dir2d(
1338 aEndAttr->x() - aCenterAttr->x(), aEndAttr->y() - aCenterAttr->y()));
1340 double anAngle = aStartDir->angle(aEndDir);
1341 bool isReversed = theFeature->boolean(SketchPlugin_Arc::REVERSED_ID())->value();
1342 if (isReversed && anAngle > 0.)
1343 anAngle -= 2.0 * PI;
1344 else if (!isReversed && anAngle <= 0.)
1345 anAngle += 2.0 * PI;
1347 double cosA = cos(anAngle);
1348 double sinA = sin(anAngle);
1350 // rotate start dir to find middle point on arc
1351 double aRadius = aStartAttr->pnt()->distance(aCenterAttr->pnt());
1352 double x = aCenterAttr->x() + aRadius * (aStartDir->x() * cosA - aStartDir->y() * sinA);
1353 double y = aCenterAttr->y() + aRadius * (aStartDir->x() * sinA + aStartDir->y() * cosA);
1355 return std::shared_ptr<GeomAPI_Pnt2d>(new GeomAPI_Pnt2d(x, y));
1358 static std::shared_ptr<GeomAPI_Pnt2d> pointOnEllipse(const FeaturePtr& theFeature,
1359 bool isEllipse = true)
1361 const std::string& anAttrName = isEllipse ? SketchPlugin_Ellipse::MAJOR_AXIS_END_ID() :
1362 SketchPlugin_EllipticArc::MAJOR_AXIS_END_ID();
1363 AttributePoint2DPtr aMajorAxisEnd = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
1364 theFeature->attribute(anAttrName));
1365 return aMajorAxisEnd ? aMajorAxisEnd->pnt() : std::shared_ptr<GeomAPI_Pnt2d>();
1368 static std::shared_ptr<GeomAPI_Pnt2d> middlePointOnBSpline(const FeaturePtr& theFeature,
1369 SketchAPI_Sketch* theSketch)
1371 GeomAPI_Edge anEdge(theFeature->lastResult()->shape());
1372 GeomPointPtr aMiddle = anEdge.middlePoint();
1373 return theSketch->to2D(aMiddle);
1376 static std::shared_ptr<GeomAPI_Pnt2d> middlePoint(const ObjectPtr& theObject,
1377 SketchAPI_Sketch* theSketch)
1379 std::shared_ptr<GeomAPI_Pnt2d> aMiddlePoint;
1380 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
1382 // move only features of the following types
1383 const std::string& aFeatureKind = aFeature->getKind();
1384 if (aFeatureKind == SketchPlugin_Point::ID())
1385 aMiddlePoint = pointCoordinates(aFeature->attribute(SketchPlugin_Point::COORD_ID()));
1386 else if (aFeatureKind == SketchPlugin_Line::ID())
1387 aMiddlePoint = middlePointOnLine(aFeature);
1388 else if (aFeatureKind == SketchPlugin_Circle::ID())
1389 aMiddlePoint = pointOnCircle(aFeature);
1390 else if (aFeatureKind == SketchPlugin_Arc::ID())
1391 aMiddlePoint = middlePointOnArc(aFeature);
1392 else if (aFeatureKind == SketchPlugin_Ellipse::ID())
1393 aMiddlePoint = pointOnEllipse(aFeature);
1394 else if (aFeatureKind == SketchPlugin_EllipticArc::ID())
1395 aMiddlePoint = pointOnEllipse(aFeature, false);
1396 else if (aFeatureKind == SketchPlugin_BSpline::ID() ||
1397 aFeatureKind == SketchPlugin_BSplinePeriodic::ID())
1398 aMiddlePoint = middlePointOnBSpline(aFeature, theSketch);
1400 return aMiddlePoint;
1403 void SketchAPI_Sketch::move(const ModelHighAPI_RefAttr& theMovedEntity,
1404 const std::shared_ptr<GeomAPI_Pnt2d>& theTargetPoint)
1406 std::shared_ptr<ModelAPI_ObjectMovedMessage> aMessage(new ModelAPI_ObjectMovedMessage);
1407 theMovedEntity.fillMessage(aMessage);
1409 std::shared_ptr<GeomAPI_Pnt2d> anOriginalPosition;
1410 if (aMessage->movedAttribute())
1411 anOriginalPosition = pointCoordinates(aMessage->movedAttribute());
1413 anOriginalPosition = middlePoint(aMessage->movedObject(), this);
1415 if (!anOriginalPosition)
1416 return; // something has gone wrong, do not process movement
1418 aMessage->setOriginalPosition(anOriginalPosition);
1419 aMessage->setCurrentPosition(theTargetPoint);
1420 Events_Loop::loop()->send(aMessage);
1423 void SketchAPI_Sketch::move(const ModelHighAPI_RefAttr& theMovedEntity,
1424 double theTargetX, double theTargetY)
1426 std::shared_ptr<GeomAPI_Pnt2d> aTargetPoint(new GeomAPI_Pnt2d(theTargetX, theTargetY));
1427 move(theMovedEntity, aTargetPoint);
1430 //--------------------------------------------------------------------------------------
1432 std::shared_ptr<GeomAPI_Pnt2d> SketchAPI_Sketch::to2D(const std::shared_ptr<GeomAPI_Pnt>& thePoint)
1434 FeaturePtr aBase = feature();
1435 std::shared_ptr<GeomDataAPI_Point> aC = std::dynamic_pointer_cast<GeomDataAPI_Point>(
1436 aBase->attribute(SketchPlugin_Sketch::ORIGIN_ID()));
1437 std::shared_ptr<GeomDataAPI_Dir> aNorm = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
1438 aBase->attribute(SketchPlugin_Sketch::NORM_ID()));
1439 std::shared_ptr<GeomDataAPI_Dir> aX = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
1440 aBase->attribute(SketchPlugin_Sketch::DIRX_ID()));
1441 std::shared_ptr<GeomAPI_Dir> aY(new GeomAPI_Dir(aNorm->dir()->cross(aX->dir())));
1443 return thePoint->to2D(aC->pnt(), aX->dir(), aY);
1446 //--------------------------------------------------------------------------------------
1448 static bool isDifferent(GeomFacePtr theFace1, GeomFacePtr theFace2)
1450 // collect edges of the first face
1451 std::list<GeomShapePtr> anEdges1;
1452 for (GeomAPI_ShapeExplorer anExp(theFace1, GeomAPI_Shape::EDGE); anExp.more(); anExp.next())
1453 anEdges1.push_back(anExp.current());
1454 // compare edges of faces
1455 for (GeomAPI_ShapeExplorer anExp(theFace2, GeomAPI_Shape::EDGE); anExp.more(); anExp.next()) {
1456 GeomShapePtr aCurrent = anExp.current();
1457 bool isFound = false;
1458 std::list<GeomShapePtr>::iterator anIt1 = anEdges1.begin();
1459 for (; anIt1 != anEdges1.end(); ++anIt1)
1460 if (aCurrent->isSameGeometry(*anIt1)) {
1462 anEdges1.erase(anIt1);
1468 return !anEdges1.empty();
1471 static bool isCustomFacesOrder(CompositeFeaturePtr theSketch)
1473 ResultConstructionPtr aSketchResult =
1474 std::dynamic_pointer_cast<ModelAPI_ResultConstruction>(theSketch->lastResult());
1478 std::shared_ptr<GeomAPI_PlanarEdges> aWires =
1479 std::dynamic_pointer_cast<GeomAPI_PlanarEdges>(aSketchResult->shape());
1483 // collect faces constructed by SketchBuilder algorithm
1484 GeomAlgoAPI_SketchBuilder aSketchBuilder(aWires->origin(), aWires->dirX(),
1485 aWires->norm(), aWires);
1486 const ListOfShape& aFaces = aSketchBuilder.faces();
1488 // compare faces stored in sketch with faces generated by SketchBuilder
1489 int aNbSketchFaces = aSketchResult->facesNum();
1491 for (ListOfShape::const_iterator aFIt = aFaces.begin();
1492 aFIt != aFaces.end() && aFaceIndex < aNbSketchFaces;
1493 ++aFIt, ++aFaceIndex) {
1494 GeomFacePtr aSketchFace = aSketchResult->face(aFaceIndex);
1495 GeomFacePtr aCurFace = (*aFIt)->face();
1496 if (isDifferent(aSketchFace, aCurFace))
1502 static void edgesOfSketchFaces(CompositeFeaturePtr theSketch,
1503 std::list<std::list<ResultPtr> >& theEdges)
1505 ResultConstructionPtr aSketchResult =
1506 std::dynamic_pointer_cast<ModelAPI_ResultConstruction>(theSketch->lastResult());
1510 // collect curves of the sketch
1511 std::map<GeomCurvePtr, ResultPtr, GeomAPI_Curve::Comparator> aCurves;
1512 int aSubNum = theSketch->numberOfSubs();
1513 for (int a = 0; a < aSubNum; ++a) {
1514 FeaturePtr aSub = theSketch->subFeature(a);
1515 const std::list<ResultPtr>& aResults = aSub->results();
1516 std::list<ResultPtr>::const_iterator aRes = aResults.cbegin();
1517 for (; aRes != aResults.cend(); aRes++) {
1518 GeomShapePtr aCurShape = (*aRes)->shape();
1519 if (aCurShape && aCurShape->isEdge())
1520 aCurves[untrimmedCurve(aCurShape)] = *aRes;
1524 // convert each face to the list of results of its edges
1525 int aFacesNum = aSketchResult->facesNum();
1526 for (int a = 0; a < aFacesNum; ++a) {
1527 theEdges.push_back(std::list<ResultPtr>());
1528 std::list<ResultPtr>& aCurEdges = theEdges.back();
1530 GeomFacePtr aFace = aSketchResult->face(a);
1531 for (GeomAPI_ShapeExplorer anExp(aFace, GeomAPI_Shape::EDGE);
1532 anExp.more(); anExp.next()) {
1533 GeomCurvePtr aCurrent = untrimmedCurve(anExp.current());
1534 aCurEdges.push_back(aCurves[aCurrent]);
1539 //--------------------------------------------------------------------------------------
1541 void SketchAPI_Sketch::dump(ModelHighAPI_Dumper& theDumper) const
1543 FeaturePtr aBase = feature();
1544 const std::string& aDocName = theDumper.name(aBase->document());
1546 AttributeSelectionPtr anExternal = aBase->selection(SketchPlugin_SketchEntity::EXTERNAL_ID());
1547 if (anExternal->value()) {
1548 theDumper << aBase << " = model.addSketch(" << aDocName <<
1549 ", " << anExternal << ")" << std::endl;
1551 // Sketch is base on a plane.
1552 std::shared_ptr<GeomAPI_Pnt> anOrigin = std::dynamic_pointer_cast<GeomDataAPI_Point>(
1553 aBase->attribute(SketchPlugin_Sketch::ORIGIN_ID()))->pnt();
1554 std::shared_ptr<GeomAPI_Dir> aNormal = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
1555 aBase->attribute(SketchPlugin_Sketch::NORM_ID()))->dir();
1556 std::shared_ptr<GeomAPI_Dir> aDirX = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
1557 aBase->attribute(SketchPlugin_Sketch::DIRX_ID()))->dir();
1559 // Check the plane is coordinate plane
1560 std::wstring aPlaneName = defaultPlane(anOrigin, aNormal, aDirX);
1561 if(anExternal->context()) { // checking for selected planes
1562 if (!aPlaneName.empty()
1563 && anExternal->context()->data()
1564 && anExternal->context()->data()->name() == aPlaneName) {
1565 // dump sketch based on coordinate plane
1566 theDumper << aBase << " = model.addSketch(" << aDocName
1567 << ", model.standardPlane(\"" << aPlaneName << "\"))" << std::endl;
1568 } else { // some other plane
1569 theDumper << aBase << " = model.addSketch(" << aDocName <<
1570 ", " << anExternal<< ")" << std::endl;
1573 if (aPlaneName.empty()) {
1574 // needs import additional module
1575 theDumper.importModule("GeomAPI");
1576 // dump plane parameters
1577 const std::string& aSketchName = theDumper.name(aBase);
1578 std::string anOriginName = aSketchName + "_origin";
1579 std::string aNormalName = aSketchName + "_norm";
1580 std::string aDirXName = aSketchName + "_dirx";
1581 // use "\n" instead of std::endl to avoid automatic dumping sketch here
1582 // and then dumplicate dumping it in the next line
1583 theDumper << anOriginName << " = " << anOrigin << "\n"
1584 << aNormalName << " = " << aNormal << "\n"
1585 << aDirXName << " = " << aDirX << "\n";
1586 // dump sketch based on arbitrary plane
1587 theDumper << aBase << " = model.addSketch(" << aDocName << ", GeomAPI_Ax3("
1588 << anOriginName << ", " << aDirXName << ", " << aNormalName << "))" << std::endl;
1590 // dump sketch based on coordinate plane
1591 theDumper << aBase << " = model.addSketch(" << aDocName
1592 << ", model.defaultPlane(\"" << aPlaneName << "\"))" << std::endl;
1597 // dump sketch's subfeatures
1598 CompositeFeaturePtr aCompFeat = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(aBase);
1599 theDumper.processSubs(aCompFeat, true);
1601 // if face order differs to the order generated by SketchBuilder,
1602 // dump the list of faces for correct execution of the script
1603 if (isCustomFacesOrder(aCompFeat)) {
1604 std::list<std::list<ResultPtr> > aFaces;
1605 edgesOfSketchFaces(aCompFeat, aFaces);
1607 /// remove faces that must not be dumped
1608 std::vector< std::list<std::list<ResultPtr>>::iterator> aFacesToRemove;
1609 for(auto itFaces = aFaces.begin(); itFaces != aFaces.end(); ++itFaces)
1611 auto & facesGroup = *itFaces;
1612 std::vector<std::list<ResultPtr>::iterator> subFacestoRemove;
1613 for(auto itGroup = facesGroup.begin(); itGroup != facesGroup.end(); ++itGroup)
1615 FeaturePtr aFeature = ModelAPI_Feature::feature(*itGroup);
1616 if(theDumper.isDumped(aFeature)){
1617 subFacestoRemove.push_back(itGroup);
1620 for(auto itGroup :subFacestoRemove){
1621 facesGroup.erase(itGroup);
1624 if(!facesGroup.size()){
1625 aFacesToRemove.push_back(itFaces);
1628 for(auto itFaces :aFacesToRemove){
1629 aFaces.erase(itFaces);
1635 const std::string& aSketchName = theDumper.name(aBase);
1636 std::string aMethodName(".changeFacesOrder");
1637 std::string aSpaceShift(aSketchName.size() + aMethodName.size(), ' ');
1639 theDumper << aSketchName << aMethodName << "([";
1640 for (std::list<std::list<ResultPtr> >::iterator aFIt = aFaces.begin();
1641 aFIt != aFaces.end(); ++aFIt) {
1642 if (aFIt != aFaces.begin())
1643 theDumper << ",\n" << aSpaceShift << " ";
1646 theDumper << "\n" << aSpaceShift << " ])" << std::endl;
1647 // call model.do() for correct update of the document's labels related to the changed faces
1648 theDumper << "model.do()" << std::endl;