1 // Copyright (C) 2014-2017 CEA/DEN, EDF R&D
3 // This library is free software; you can redistribute it and/or
4 // modify it under the terms of the GNU Lesser General Public
5 // License as published by the Free Software Foundation; either
6 // version 2.1 of the License, or (at your option) any later version.
8 // This library is distributed in the hope that it will be useful,
9 // but WITHOUT ANY WARRANTY; without even the implied warranty of
10 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 // Lesser General Public License for more details.
13 // You should have received a copy of the GNU Lesser General Public
14 // License along with this library; if not, write to the Free Software
15 // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 // See http://www.salome-platform.org/ or
18 // email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
21 #include "SketchAPI_Sketch.h"
22 //--------------------------------------------------------------------------------------
23 #include <SketchPlugin_Constraint.h>
24 #include <SketchPlugin_ConstraintAngle.h>
25 #include <SketchPlugin_ConstraintCoincidence.h>
26 #include <SketchPlugin_ConstraintCollinear.h>
27 #include <SketchPlugin_ConstraintDistance.h>
28 #include <SketchPlugin_ConstraintDistanceHorizontal.h>
29 #include <SketchPlugin_ConstraintDistanceVertical.h>
30 #include <SketchPlugin_ConstraintEqual.h>
31 #include <SketchPlugin_Fillet.h>
32 #include <SketchPlugin_ConstraintHorizontal.h>
33 #include <SketchPlugin_ConstraintLength.h>
34 #include <SketchPlugin_ConstraintMiddle.h>
35 #include <SketchPlugin_ConstraintMirror.h>
36 #include <SketchPlugin_ConstraintParallel.h>
37 #include <SketchPlugin_ConstraintPerpendicular.h>
38 #include <SketchPlugin_ConstraintRadius.h>
39 #include <SketchPlugin_ConstraintRigid.h>
40 #include <SketchPlugin_Trim.h>
41 #include <SketchPlugin_Split.h>
42 #include <SketchPlugin_ConstraintTangent.h>
43 #include <SketchPlugin_ConstraintVertical.h>
44 #include <SketcherPrs_Tools.h>
45 //--------------------------------------------------------------------------------------
46 #include <ModelAPI_Events.h>
47 #include <ModelAPI_CompositeFeature.h>
48 #include <ModelAPI_ResultConstruction.h>
49 #include <ModelHighAPI_Double.h>
50 #include <ModelHighAPI_Dumper.h>
51 #include <ModelHighAPI_RefAttr.h>
52 #include <ModelHighAPI_Selection.h>
53 #include <ModelHighAPI_Services.h>
54 #include <ModelHighAPI_Tools.h>
55 //--------------------------------------------------------------------------------------
56 #include "SketchAPI_Arc.h"
57 #include "SketchAPI_MacroArc.h"
58 #include "SketchAPI_Circle.h"
59 #include "SketchAPI_IntersectionPoint.h"
60 #include "SketchAPI_Line.h"
61 #include "SketchAPI_MacroCircle.h"
62 #include "SketchAPI_Mirror.h"
63 #include "SketchAPI_Point.h"
64 #include "SketchAPI_Projection.h"
65 #include "SketchAPI_Rectangle.h"
66 #include "SketchAPI_Rotation.h"
67 #include "SketchAPI_Translation.h"
68 //--------------------------------------------------------------------------------------
69 #include <GeomAPI_Dir2d.h>
70 #include <GeomAPI_XY.h>
72 //--------------------------------------------------------------------------------------
73 SketchAPI_Sketch::SketchAPI_Sketch(
74 const std::shared_ptr<ModelAPI_Feature> & theFeature)
75 : ModelHighAPI_Interface(theFeature)
80 SketchAPI_Sketch::SketchAPI_Sketch(
81 const std::shared_ptr<ModelAPI_Feature> & theFeature,
82 const std::shared_ptr<GeomAPI_Ax3> & thePlane)
83 : ModelHighAPI_Interface(theFeature)
90 SketchAPI_Sketch::SketchAPI_Sketch(
91 const std::shared_ptr<ModelAPI_Feature> & theFeature,
92 const ModelHighAPI_Selection & theExternal)
93 : ModelHighAPI_Interface(theFeature)
96 setExternal(theExternal);
100 SketchAPI_Sketch::SketchAPI_Sketch(
101 const std::shared_ptr<ModelAPI_Feature> & theFeature,
102 std::shared_ptr<ModelAPI_Object> thePlaneObject)
103 : ModelHighAPI_Interface(theFeature)
106 setExternal(thePlaneObject);
110 SketchAPI_Sketch::~SketchAPI_Sketch()
115 //--------------------------------------------------------------------------------------
116 std::shared_ptr<ModelAPI_CompositeFeature> SketchAPI_Sketch::compositeFeature() const
118 return std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(feature());
121 //--------------------------------------------------------------------------------------
122 void SketchAPI_Sketch::setPlane(const std::shared_ptr<GeomAPI_Ax3> & thePlane)
124 fillAttribute(thePlane->origin(), myorigin);
125 fillAttribute(thePlane->dirX(), mydirX);
126 fillAttribute(thePlane->normal(), mynormal);
131 void SketchAPI_Sketch::setExternal(const ModelHighAPI_Selection & theExternal)
133 fillAttribute(theExternal, myexternal);
138 void SketchAPI_Sketch::setExternal(std::shared_ptr<ModelAPI_Object> thePlaneObject)
140 ResultPtr aRes = std::dynamic_pointer_cast<ModelAPI_Result>(thePlaneObject);
141 ModelHighAPI_Selection aSel(aRes);
145 //--------------------------------------------------------------------------------------
146 void SketchAPI_Sketch::setValue(
147 const std::shared_ptr<ModelHighAPI_Interface> & theConstraint,
148 const ModelHighAPI_Double & theValue)
150 fillAttribute(theValue, theConstraint->feature()->real(SketchPlugin_Constraint::VALUE()));
152 // theConstraint->execute();
155 //--------------------------------------------------------------------------------------
156 std::list<ModelHighAPI_Selection> SketchAPI_Sketch::selectFace() const
158 const_cast<SketchAPI_Sketch*>(this)->execute();
160 std::list<ModelHighAPI_Selection> aSelectionList;
162 ResultConstructionPtr aResultConstruction =
163 std::dynamic_pointer_cast<ModelAPI_ResultConstruction>(feature()->firstResult());
164 if (aResultConstruction.get() == NULL)
165 return aSelectionList;
167 for (int anIndex = 0; anIndex < aResultConstruction->facesNum(); ++anIndex) {
168 aSelectionList.push_back(
169 ModelHighAPI_Selection(aResultConstruction,
170 aResultConstruction->face(anIndex)));
173 return aSelectionList;
176 //--------------------------------------------------------------------------------------
177 SketchPtr addSketch(const std::shared_ptr<ModelAPI_Document> & thePart,
178 const std::shared_ptr<GeomAPI_Ax3> & thePlane)
180 std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(SketchAPI_Sketch::ID());
181 return SketchPtr(new SketchAPI_Sketch(aFeature, thePlane));
184 SketchPtr addSketch(const std::shared_ptr<ModelAPI_Document> & thePart,
185 const ModelHighAPI_Selection & theExternal)
187 std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(SketchAPI_Sketch::ID());
188 return SketchPtr(new SketchAPI_Sketch(aFeature, theExternal));
191 SketchPtr addSketch(const std::shared_ptr<ModelAPI_Document> & thePart,
192 const std::string & theExternalName)
194 std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(SketchAPI_Sketch::ID());
196 new SketchAPI_Sketch(aFeature, ModelHighAPI_Selection("FACE", theExternalName)));
199 SketchPtr addSketch(const std::shared_ptr<ModelAPI_Document> & thePart,
200 std::shared_ptr<ModelAPI_Object> thePlaneObject)
202 std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(SketchAPI_Sketch::ID());
203 return SketchPtr(new SketchAPI_Sketch(aFeature, thePlaneObject));
207 //--------------------------------------------------------------------------------------
208 std::shared_ptr<SketchAPI_Point> SketchAPI_Sketch::addPoint(
209 double theX, double theY)
211 std::shared_ptr<ModelAPI_Feature> aFeature =
212 compositeFeature()->addFeature(SketchPlugin_Point::ID());
213 return PointPtr(new SketchAPI_Point(aFeature, theX, theY));
215 std::shared_ptr<SketchAPI_Point> SketchAPI_Sketch::addPoint(
216 const std::shared_ptr<GeomAPI_Pnt2d> & thePoint)
218 std::shared_ptr<ModelAPI_Feature> aFeature =
219 compositeFeature()->addFeature(SketchPlugin_Point::ID());
220 return PointPtr(new SketchAPI_Point(aFeature, thePoint));
222 std::shared_ptr<SketchAPI_Point>
223 SketchAPI_Sketch::addPoint(const ModelHighAPI_Selection & theExternal)
225 std::shared_ptr<ModelAPI_Feature> aFeature =
226 compositeFeature()->addFeature(SketchPlugin_Point::ID());
227 return PointPtr(new SketchAPI_Point(aFeature, theExternal));
229 std::shared_ptr<SketchAPI_Point> SketchAPI_Sketch::addPoint(const std::string & theExternalName)
231 std::shared_ptr<ModelAPI_Feature> aFeature =
232 compositeFeature()->addFeature(SketchPlugin_Point::ID());
233 return PointPtr(new SketchAPI_Point(aFeature, theExternalName));
236 //--------------------------------------------------------------------------------------
237 std::shared_ptr<SketchAPI_IntersectionPoint> SketchAPI_Sketch::addIntersectionPoint(
238 const ModelHighAPI_Selection & theExternal)
240 std::shared_ptr<ModelAPI_Feature> aFeature =
241 compositeFeature()->addFeature(SketchPlugin_IntersectionPoint::ID());
242 return IntersectionPointPtr(new SketchAPI_IntersectionPoint(aFeature, theExternal));
244 std::shared_ptr<SketchAPI_IntersectionPoint> SketchAPI_Sketch::addIntersectionPoint(
245 const std::string & theExternalName)
247 std::shared_ptr<ModelAPI_Feature> aFeature =
248 compositeFeature()->addFeature(SketchPlugin_IntersectionPoint::ID());
249 return IntersectionPointPtr(new SketchAPI_IntersectionPoint(aFeature, theExternalName));
252 //--------------------------------------------------------------------------------------
253 std::shared_ptr<SketchAPI_Line> SketchAPI_Sketch::addLine(double theX1, double theY1,
254 double theX2, double theY2)
256 std::shared_ptr<ModelAPI_Feature> aFeature =
257 compositeFeature()->addFeature(SketchPlugin_Line::ID());
258 return LinePtr(new SketchAPI_Line(aFeature, theX1, theY1, theX2, theY2));
260 std::shared_ptr<SketchAPI_Line> SketchAPI_Sketch::addLine(
261 const std::shared_ptr<GeomAPI_Pnt2d> & theStartPoint,
262 const std::shared_ptr<GeomAPI_Pnt2d> & theEndPoint)
264 std::shared_ptr<ModelAPI_Feature> aFeature =
265 compositeFeature()->addFeature(SketchPlugin_Line::ID());
266 return LinePtr(new SketchAPI_Line(aFeature, theStartPoint, theEndPoint));
268 std::shared_ptr<SketchAPI_Line>
269 SketchAPI_Sketch::addLine(const ModelHighAPI_Selection & theExternal)
271 std::shared_ptr<ModelAPI_Feature> aFeature =
272 compositeFeature()->addFeature(SketchPlugin_Line::ID());
273 return LinePtr(new SketchAPI_Line(aFeature, theExternal));
275 std::shared_ptr<SketchAPI_Line> SketchAPI_Sketch::addLine(const std::string & theExternalName)
277 std::shared_ptr<ModelAPI_Feature> aFeature =
278 compositeFeature()->addFeature(SketchPlugin_Line::ID());
279 return LinePtr(new SketchAPI_Line(aFeature, theExternalName));
282 //--------------------------------------------------------------------------------------
283 std::shared_ptr<SketchAPI_Rectangle> SketchAPI_Sketch::addRectangle(double theX1, double theY1,
284 double theX2, double theY2)
286 std::shared_ptr<ModelAPI_Feature> aFeature =
287 compositeFeature()->addFeature(SketchAPI_Rectangle::ID());
288 return RectanglePtr(new SketchAPI_Rectangle(aFeature, theX1, theY1, theX2, theY2));
290 std::shared_ptr<SketchAPI_Rectangle> SketchAPI_Sketch::addRectangle(
291 const std::shared_ptr<GeomAPI_Pnt2d> & theStartPoint,
292 const std::shared_ptr<GeomAPI_Pnt2d> & theEndPoint)
294 std::shared_ptr<ModelAPI_Feature> aFeature =
295 compositeFeature()->addFeature(SketchAPI_Rectangle::ID());
296 return RectanglePtr(new SketchAPI_Rectangle(aFeature, theStartPoint, theEndPoint));
299 //--------------------------------------------------------------------------------------
300 std::shared_ptr<SketchAPI_Circle> SketchAPI_Sketch::addCircle(double theCenterX,
304 std::shared_ptr<ModelAPI_Feature> aFeature =
305 compositeFeature()->addFeature(SketchPlugin_Circle::ID());
306 return CirclePtr(new SketchAPI_Circle(aFeature, theCenterX, theCenterY, theRadius));
309 std::shared_ptr<SketchAPI_Circle> SketchAPI_Sketch::addCircle(
310 const std::shared_ptr<GeomAPI_Pnt2d>& theCenter,
313 std::shared_ptr<ModelAPI_Feature> aFeature =
314 compositeFeature()->addFeature(SketchPlugin_Circle::ID());
315 return CirclePtr(new SketchAPI_Circle(aFeature, theCenter, theRadius));
318 std::shared_ptr<SketchAPI_MacroCircle> SketchAPI_Sketch::addCircle(double theCenterX,
323 std::shared_ptr<ModelAPI_Feature> aFeature =
324 compositeFeature()->addFeature(SketchPlugin_MacroCircle::ID());
325 return MacroCirclePtr(new SketchAPI_MacroCircle(aFeature, theCenterX, theCenterY,
326 thePassedX, thePassedY));
329 std::shared_ptr<SketchAPI_MacroCircle> SketchAPI_Sketch::addCircle(
330 const std::shared_ptr<GeomAPI_Pnt2d>& theCenterPoint,
331 const std::shared_ptr<GeomAPI_Pnt2d>& thePassedPoint)
333 std::shared_ptr<ModelAPI_Feature> aFeature =
334 compositeFeature()->addFeature(SketchPlugin_MacroCircle::ID());
335 return MacroCirclePtr(new SketchAPI_MacroCircle(aFeature, theCenterPoint, thePassedPoint));
338 std::shared_ptr<SketchAPI_MacroCircle> SketchAPI_Sketch::addCircle(double theX1, double theY1,
339 double theX2, double theY2,
340 double theX3, double theY3)
342 std::shared_ptr<ModelAPI_Feature> aFeature =
343 compositeFeature()->addFeature(SketchPlugin_MacroCircle::ID());
344 return MacroCirclePtr(new SketchAPI_MacroCircle(aFeature, theX1, theY1,
349 std::shared_ptr<SketchAPI_MacroCircle> SketchAPI_Sketch::addCircle(
350 const std::shared_ptr<GeomAPI_Pnt2d>& thePoint1,
351 const std::shared_ptr<GeomAPI_Pnt2d>& thePoint2,
352 const std::shared_ptr<GeomAPI_Pnt2d>& thePoint3)
354 std::shared_ptr<ModelAPI_Feature> aFeature =
355 compositeFeature()->addFeature(SketchPlugin_MacroCircle::ID());
356 return MacroCirclePtr(new SketchAPI_MacroCircle(aFeature, thePoint1, thePoint2, thePoint3));
359 std::shared_ptr<SketchAPI_Circle>
360 SketchAPI_Sketch::addCircle(const ModelHighAPI_Selection & theExternal)
362 std::shared_ptr<ModelAPI_Feature> aFeature =
363 compositeFeature()->addFeature(SketchPlugin_Circle::ID());
364 return CirclePtr(new SketchAPI_Circle(aFeature, theExternal));
367 std::shared_ptr<SketchAPI_Circle> SketchAPI_Sketch::addCircle(const std::string & theExternalName)
369 // TODO(spo): Add constraint SketchConstraintRigid like in PythonAPI. Is it necessary?
370 std::shared_ptr<ModelAPI_Feature> aFeature =
371 compositeFeature()->addFeature(SketchPlugin_Circle::ID());
372 return CirclePtr(new SketchAPI_Circle(aFeature, theExternalName));
375 //--------------------------------------------------------------------------------------
376 std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(double theCenterX, double theCenterY,
377 double theStartX, double theStartY,
378 double theEndX, double theEndY,
381 std::shared_ptr<ModelAPI_Feature> aFeature =
382 compositeFeature()->addFeature(SketchPlugin_Arc::ID());
383 return ArcPtr(new SketchAPI_Arc(aFeature,
384 theCenterX, theCenterY,
385 theStartX, theStartY,
390 std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(
391 const std::shared_ptr<GeomAPI_Pnt2d>& theCenter,
392 const std::shared_ptr<GeomAPI_Pnt2d>& theStart,
393 const std::shared_ptr<GeomAPI_Pnt2d>& theEnd,
396 std::shared_ptr<ModelAPI_Feature> aFeature =
397 compositeFeature()->addFeature(SketchPlugin_Arc::ID());
398 return ArcPtr(new SketchAPI_Arc(aFeature, theCenter, theStart, theEnd, theInversed));
401 std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(double theStartX, double theStartY,
402 double theEndX, double theEndY,
403 double thePassedX, double thePassedY)
405 std::shared_ptr<ModelAPI_Feature> aFeature =
406 compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
407 return MacroArcPtr(new SketchAPI_MacroArc(aFeature,
408 theStartX, theStartY,
410 thePassedX, thePassedY));
413 std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(
414 const std::shared_ptr<GeomAPI_Pnt2d>& theStart,
415 const std::shared_ptr<GeomAPI_Pnt2d>& theEnd,
416 const std::shared_ptr<GeomAPI_Pnt2d>& thePassed)
418 std::shared_ptr<ModelAPI_Feature> aFeature =
419 compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
420 return MacroArcPtr(new SketchAPI_MacroArc(aFeature, theStart, theEnd, thePassed));
423 std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(
424 const ModelHighAPI_RefAttr& theTangentPoint,
425 double theEndX, double theEndY,
428 std::shared_ptr<ModelAPI_Feature> aFeature =
429 compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
430 return MacroArcPtr(new SketchAPI_MacroArc(
431 aFeature, theTangentPoint, theEndX, theEndY, theInversed));
434 std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(
435 const ModelHighAPI_RefAttr& theTangentPoint,
436 const std::shared_ptr<GeomAPI_Pnt2d>& theEnd,
439 std::shared_ptr<ModelAPI_Feature> aFeature =
440 compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
441 return MacroArcPtr(new SketchAPI_MacroArc(aFeature, theTangentPoint, theEnd, theInversed));
444 std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(const ModelHighAPI_Selection & theExternal)
446 std::shared_ptr<ModelAPI_Feature> aFeature =
447 compositeFeature()->addFeature(SketchPlugin_Arc::ID());
448 return ArcPtr(new SketchAPI_Arc(aFeature, theExternal));
451 std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(const std::string & theExternalName)
453 // TODO(spo): Add constraint SketchConstraintRigid like in PythonAPI. Is it necessary?
454 std::shared_ptr<ModelAPI_Feature> aFeature =
455 compositeFeature()->addFeature(SketchPlugin_Arc::ID());
456 return ArcPtr(new SketchAPI_Arc(aFeature, theExternalName));
459 //--------------------------------------------------------------------------------------
460 std::shared_ptr<SketchAPI_Projection> SketchAPI_Sketch::addProjection(
461 const ModelHighAPI_Selection & theExternalFeature,
464 std::shared_ptr<ModelAPI_Feature> aFeature =
465 compositeFeature()->addFeature(SketchPlugin_Projection::ID());
466 ProjectionPtr aProjection(new SketchAPI_Projection(aFeature, theExternalFeature));
467 aProjection->setIncludeToResult(theKeepResult);
471 std::shared_ptr<SketchAPI_Projection> SketchAPI_Sketch::addProjection(
472 const std::string & theExternalName,
475 std::shared_ptr<ModelAPI_Feature> aFeature =
476 compositeFeature()->addFeature(SketchPlugin_Projection::ID());
477 ProjectionPtr aProjection(new SketchAPI_Projection(aFeature, theExternalName));
478 aProjection->setIncludeToResult(theKeepResult);
482 //--------------------------------------------------------------------------------------
483 std::shared_ptr<SketchAPI_Mirror> SketchAPI_Sketch::addMirror(
484 const ModelHighAPI_RefAttr & theMirrorLine,
485 const std::list<std::shared_ptr<ModelAPI_Object> > & theObjects)
487 std::shared_ptr<ModelAPI_Feature> aFeature =
488 compositeFeature()->addFeature(SketchPlugin_ConstraintMirror::ID());
489 return MirrorPtr(new SketchAPI_Mirror(aFeature, theMirrorLine, theObjects));
492 //--------------------------------------------------------------------------------------
493 std::shared_ptr<SketchAPI_Translation> SketchAPI_Sketch::addTranslation(
494 const std::list<std::shared_ptr<ModelAPI_Object> > & theObjects,
495 const ModelHighAPI_RefAttr & thePoint1,
496 const ModelHighAPI_RefAttr & thePoint2,
497 const ModelHighAPI_Integer & theNumberOfObjects,
500 std::shared_ptr<ModelAPI_Feature> aFeature =
501 compositeFeature()->addFeature(SketchPlugin_MultiTranslation::ID());
502 return TranslationPtr(new SketchAPI_Translation(aFeature, theObjects, thePoint1,
503 thePoint2, theNumberOfObjects, theFullValue));
506 //--------------------------------------------------------------------------------------
507 std::shared_ptr<SketchAPI_Rotation> SketchAPI_Sketch::addRotation(
508 const std::list<std::shared_ptr<ModelAPI_Object> > & theObjects,
509 const ModelHighAPI_RefAttr & theCenter,
510 const ModelHighAPI_Double & theAngle,
511 const ModelHighAPI_Integer & theNumberOfObjects,
514 std::shared_ptr<ModelAPI_Feature> aFeature =
515 compositeFeature()->addFeature(SketchPlugin_MultiRotation::ID());
517 new SketchAPI_Rotation(aFeature, theObjects, theCenter,
518 theAngle, theNumberOfObjects, theFullValue));
521 //--------------------------------------------------------------------------------------
522 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::addSplit(
523 const ModelHighAPI_Reference& theFeature,
524 const std::shared_ptr<GeomAPI_Pnt2d>& thePositionPoint)
526 std::shared_ptr<ModelAPI_Feature> aFeature =
527 compositeFeature()->addFeature(SketchPlugin_Split::ID());
528 fillAttribute(theFeature, aFeature->reference(SketchPlugin_Split::SELECTED_OBJECT()));
530 AttributePtr anAttribute = aFeature->attribute(SketchPlugin_Split::SELECTED_POINT());
531 if (anAttribute->attributeType() == GeomDataAPI_Point2D::typeId()) {
532 AttributePoint2DPtr aPointAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(anAttribute);
533 fillAttribute(thePositionPoint, aPointAttr);
536 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
539 //--------------------------------------------------------------------------------------
540 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::addTrim(
541 const ModelHighAPI_Reference& theFeature,
542 const std::shared_ptr<GeomAPI_Pnt2d>& thePositionPoint)
544 std::shared_ptr<ModelAPI_Feature> aFeature =
545 compositeFeature()->addFeature(SketchPlugin_Trim::ID());
546 fillAttribute(theFeature, aFeature->reference(SketchPlugin_Trim::SELECTED_OBJECT()));
548 AttributePtr anAttribute = aFeature->attribute(SketchPlugin_Trim::SELECTED_POINT());
549 if (anAttribute->attributeType() == GeomDataAPI_Point2D::typeId()) {
550 AttributePoint2DPtr aPointAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(anAttribute);
551 fillAttribute(thePositionPoint, aPointAttr);
554 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
557 //--------------------------------------------------------------------------------------
558 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setAngle(
559 const ModelHighAPI_RefAttr & theLine1,
560 const ModelHighAPI_RefAttr & theLine2,
561 const ModelHighAPI_Double & theValue)
563 std::shared_ptr<ModelAPI_Feature> aFeature =
564 compositeFeature()->addFeature(SketchPlugin_ConstraintAngle::ID());
565 fillAttribute(SketcherPrs_Tools::ANGLE_DIRECT,
566 aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
567 // fill the value before llines to avoid calculation of angle value by the Angle feature
568 fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
569 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
570 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
572 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
575 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setAngleComplementary(
576 const ModelHighAPI_RefAttr & theLine1,
577 const ModelHighAPI_RefAttr & theLine2,
578 const ModelHighAPI_Double & theValue)
580 std::shared_ptr<ModelAPI_Feature> aFeature =
581 compositeFeature()->addFeature(SketchPlugin_ConstraintAngle::ID());
582 fillAttribute(SketcherPrs_Tools::ANGLE_COMPLEMENTARY,
583 aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
584 fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
585 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
586 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
587 // fillAttribute(theValue, aFeature->real(SketchPlugin_Constraint::VALUE()));
589 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
592 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setAngleBackward(
593 const ModelHighAPI_RefAttr & theLine1,
594 const ModelHighAPI_RefAttr & theLine2,
595 const ModelHighAPI_Double & theValue)
597 std::shared_ptr<ModelAPI_Feature> aFeature =
598 compositeFeature()->addFeature(SketchPlugin_ConstraintAngle::ID());
599 fillAttribute(SketcherPrs_Tools::ANGLE_BACKWARD,
600 aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
601 fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
602 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
603 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
604 // fillAttribute(theValue, aFeature->real(SketchPlugin_Constraint::VALUE()));
606 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
609 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setCoincident(
610 const ModelHighAPI_RefAttr & thePoint1,
611 const ModelHighAPI_RefAttr & thePoint2)
613 std::shared_ptr<ModelAPI_Feature> aFeature =
614 compositeFeature()->addFeature(SketchPlugin_ConstraintCoincidence::ID());
615 fillAttribute(thePoint1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
616 fillAttribute(thePoint2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
618 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
621 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setCollinear(
622 const ModelHighAPI_RefAttr & theLine1,
623 const ModelHighAPI_RefAttr & theLine2)
625 std::shared_ptr<ModelAPI_Feature> aFeature =
626 compositeFeature()->addFeature(SketchPlugin_ConstraintCollinear::ID());
627 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
628 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
630 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
633 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setDistance(
634 const ModelHighAPI_RefAttr & thePoint,
635 const ModelHighAPI_RefAttr & thePointOrLine,
636 const ModelHighAPI_Double & theValue,
639 std::shared_ptr<ModelAPI_Feature> aFeature =
640 compositeFeature()->addFeature(SketchPlugin_ConstraintDistance::ID());
641 fillAttribute(thePoint, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
642 fillAttribute(thePointOrLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
643 fillAttribute(theValue, aFeature->real(SketchPlugin_Constraint::VALUE()));
644 fillAttribute(isSigned, aFeature->boolean(SketchPlugin_ConstraintDistance::SIGNED()));
646 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
649 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setSignedDistance(
650 const ModelHighAPI_RefAttr & thePoint,
651 const ModelHighAPI_RefAttr & thePointOrLine,
652 const ModelHighAPI_Double & theValue)
654 return setDistance(thePoint, thePointOrLine, theValue, true);
657 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setUnsignedDistance(
658 const ModelHighAPI_RefAttr & thePoint,
659 const ModelHighAPI_RefAttr & thePointOrLine,
660 const ModelHighAPI_Double & theValue)
662 return setDistance(thePoint, thePointOrLine, theValue, false);
665 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setHorizontalDistance(
666 const ModelHighAPI_RefAttr & thePoint1,
667 const ModelHighAPI_RefAttr & thePoint2,
668 const ModelHighAPI_Double & theValue)
670 std::shared_ptr<ModelAPI_Feature> aFeature =
671 compositeFeature()->addFeature(SketchPlugin_ConstraintDistanceHorizontal::ID());
672 fillAttribute(thePoint1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
673 fillAttribute(thePoint2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
674 fillAttribute(theValue,
675 aFeature->real(SketchPlugin_ConstraintDistanceAlongDir::DISTANCE_VALUE_ID()));
677 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
680 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setVerticalDistance(
681 const ModelHighAPI_RefAttr & thePoint1,
682 const ModelHighAPI_RefAttr & thePoint2,
683 const ModelHighAPI_Double & theValue)
685 std::shared_ptr<ModelAPI_Feature> aFeature =
686 compositeFeature()->addFeature(SketchPlugin_ConstraintDistanceVertical::ID());
687 fillAttribute(thePoint1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
688 fillAttribute(thePoint2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
689 fillAttribute(theValue,
690 aFeature->real(SketchPlugin_ConstraintDistanceAlongDir::DISTANCE_VALUE_ID()));
692 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
695 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setEqual(
696 const ModelHighAPI_RefAttr & theObject1,
697 const ModelHighAPI_RefAttr & theObject2)
699 std::shared_ptr<ModelAPI_Feature> aFeature =
700 compositeFeature()->addFeature(SketchPlugin_ConstraintEqual::ID());
701 fillAttribute(theObject1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
702 fillAttribute(theObject2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
704 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
707 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setFillet(
708 const ModelHighAPI_RefAttr & thePoint)
710 std::shared_ptr<ModelAPI_Feature> aFeature =
711 compositeFeature()->addFeature(SketchPlugin_Fillet::ID());
712 fillAttribute(thePoint, aFeature->data()->refattr(SketchPlugin_Fillet::FILLET_POINT_ID()));
713 apply(); // finish operation to remove Fillet feature correcly
714 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
717 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setFilletWithRadius(
718 const ModelHighAPI_RefAttr & thePoint,
719 const ModelHighAPI_Double & theRadius)
721 CompositeFeaturePtr aSketch = compositeFeature();
722 int aNbSubs = aSketch->numberOfSubs();
725 InterfacePtr aFilletFeature = setFillet(thePoint);
727 // set radius for just created arc
728 FeaturePtr anArc = aSketch->subFeature(aNbSubs - 1);
729 if (anArc->getKind() == SketchPlugin_Arc::ID())
730 setRadius(ModelHighAPI_RefAttr(ObjectPtr(anArc->lastResult())), ModelHighAPI_Double(theRadius));
732 return aFilletFeature;
735 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setFixed(
736 const ModelHighAPI_RefAttr & theObject)
738 std::shared_ptr<ModelAPI_Feature> aFeature =
739 compositeFeature()->addFeature(SketchPlugin_ConstraintRigid::ID());
740 fillAttribute(theObject, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
742 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
745 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setHorizontal(
746 const ModelHighAPI_RefAttr & theLine)
748 std::shared_ptr<ModelAPI_Feature> aFeature =
749 compositeFeature()->addFeature(SketchPlugin_ConstraintHorizontal::ID());
750 fillAttribute(theLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
752 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
755 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setLength(
756 const ModelHighAPI_RefAttr & theLine,
757 const ModelHighAPI_Double & theValue)
759 std::shared_ptr<ModelAPI_Feature> aFeature =
760 compositeFeature()->addFeature(SketchPlugin_ConstraintLength::ID());
761 fillAttribute(theLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
762 fillAttribute(theValue, aFeature->real(SketchPlugin_Constraint::VALUE()));
764 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
767 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setMiddlePoint(
768 const ModelHighAPI_RefAttr & thePoint,
769 const ModelHighAPI_RefAttr & theLine)
771 std::shared_ptr<ModelAPI_Feature> aFeature =
772 compositeFeature()->addFeature(SketchPlugin_ConstraintMiddle::ID());
773 fillAttribute(thePoint, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
774 fillAttribute(theLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
776 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
779 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setParallel(
780 const ModelHighAPI_RefAttr & theLine1,
781 const ModelHighAPI_RefAttr & theLine2)
783 std::shared_ptr<ModelAPI_Feature> aFeature =
784 compositeFeature()->addFeature(SketchPlugin_ConstraintParallel::ID());
785 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
786 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
788 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
791 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setPerpendicular(
792 const ModelHighAPI_RefAttr & theLine1,
793 const ModelHighAPI_RefAttr & theLine2)
795 std::shared_ptr<ModelAPI_Feature> aFeature =
796 compositeFeature()->addFeature(SketchPlugin_ConstraintPerpendicular::ID());
797 fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
798 fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
800 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
803 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setRadius(
804 const ModelHighAPI_RefAttr & theCircleOrArc,
805 const ModelHighAPI_Double & theValue)
807 std::shared_ptr<ModelAPI_Feature> aFeature =
808 compositeFeature()->addFeature(SketchPlugin_ConstraintRadius::ID());
809 fillAttribute(theCircleOrArc, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
810 fillAttribute(theValue, aFeature->real(SketchPlugin_Constraint::VALUE()));
812 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
815 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setTangent(
816 const ModelHighAPI_RefAttr & theLine,
817 const ModelHighAPI_RefAttr & theCircle)
819 std::shared_ptr<ModelAPI_Feature> aFeature =
820 compositeFeature()->addFeature(SketchPlugin_ConstraintTangent::ID());
821 fillAttribute(theLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
822 fillAttribute(theCircle, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
824 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
827 std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setVertical(
828 const ModelHighAPI_RefAttr & theLine)
830 std::shared_ptr<ModelAPI_Feature> aFeature =
831 compositeFeature()->addFeature(SketchPlugin_ConstraintVertical::ID());
832 fillAttribute(theLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
834 return InterfacePtr(new ModelHighAPI_Interface(aFeature));
837 //--------------------------------------------------------------------------------------
839 static std::shared_ptr<GeomAPI_Pnt2d> pointCoordinates(const AttributePtr& thePoint)
841 AttributePoint2DPtr aPnt = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(thePoint);
844 return std::shared_ptr<GeomAPI_Pnt2d>();
847 static std::shared_ptr<GeomAPI_Pnt2d> middlePointOnLine(const FeaturePtr& theFeature)
849 AttributePoint2DPtr aStartAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
850 theFeature->attribute(SketchPlugin_Line::START_ID()));
851 AttributePoint2DPtr aEndAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
852 theFeature->attribute(SketchPlugin_Line::END_ID()));
854 if (!aStartAttr || !aEndAttr)
855 return std::shared_ptr<GeomAPI_Pnt2d>();
857 std::shared_ptr<GeomAPI_XY> aStartPoint = aStartAttr->pnt()->xy();
858 std::shared_ptr<GeomAPI_XY> aEndPoint = aEndAttr->pnt()->xy();
859 return std::shared_ptr<GeomAPI_Pnt2d>(
860 new GeomAPI_Pnt2d(aStartPoint->added(aEndPoint)->multiplied(0.5)));
863 static std::shared_ptr<GeomAPI_Pnt2d> pointOnCircle(const FeaturePtr& theFeature)
865 AttributePoint2DPtr aCenter = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
866 theFeature->attribute(SketchPlugin_Circle::CENTER_ID()));
867 AttributeDoublePtr aRadius = theFeature->real(SketchPlugin_Circle::RADIUS_ID());
869 if (!aCenter || !aRadius)
870 return std::shared_ptr<GeomAPI_Pnt2d>();
872 return std::shared_ptr<GeomAPI_Pnt2d>(
873 new GeomAPI_Pnt2d(aCenter->x() + aRadius->value(), aCenter->y()));
876 static std::shared_ptr<GeomAPI_Pnt2d> middlePointOnArc(const FeaturePtr& theFeature)
878 static const double PI = 3.141592653589793238463;
880 AttributePoint2DPtr aCenterAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
881 theFeature->attribute(SketchPlugin_Arc::CENTER_ID()));
882 AttributePoint2DPtr aStartAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
883 theFeature->attribute(SketchPlugin_Arc::START_ID()));
884 AttributePoint2DPtr aEndAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
885 theFeature->attribute(SketchPlugin_Arc::END_ID()));
887 if (!aCenterAttr || !aStartAttr || !aEndAttr)
888 return std::shared_ptr<GeomAPI_Pnt2d>();
890 std::shared_ptr<GeomAPI_Dir2d> aStartDir(new GeomAPI_Dir2d(
891 aStartAttr->x() - aCenterAttr->x(), aStartAttr->y() - aCenterAttr->y()));
892 std::shared_ptr<GeomAPI_Dir2d> aEndDir(new GeomAPI_Dir2d(
893 aEndAttr->x() - aCenterAttr->x(), aEndAttr->y() - aCenterAttr->y()));
895 double anAngle = aStartDir->angle(aEndDir);
896 bool isReversed = theFeature->boolean(SketchPlugin_Arc::REVERSED_ID())->value();
897 if (isReversed && anAngle > 0.)
899 else if (!isReversed && anAngle <= 0.)
902 double cosA = cos(anAngle);
903 double sinA = sin(anAngle);
905 // rotate start dir to find middle point on arc
906 double aRadius = aStartAttr->pnt()->distance(aCenterAttr->pnt());
907 double x = aCenterAttr->x() + aRadius * (aStartDir->x() * cosA - aStartDir->y() * sinA);
908 double y = aCenterAttr->y() + aRadius * (aStartDir->x() * sinA + aStartDir->y() * cosA);
910 return std::shared_ptr<GeomAPI_Pnt2d>(new GeomAPI_Pnt2d(x, y));
913 static std::shared_ptr<GeomAPI_Pnt2d> middlePoint(const ObjectPtr& theObject)
915 FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
917 const std::string& aFeatureKind = aFeature->getKind();
918 if (aFeatureKind == SketchPlugin_Point::ID())
919 return pointCoordinates(aFeature->attribute(SketchPlugin_Point::COORD_ID()));
920 else if (aFeatureKind == SketchPlugin_Line::ID())
921 return middlePointOnLine(aFeature);
922 else if (aFeatureKind == SketchPlugin_Circle::ID())
923 return pointOnCircle(aFeature);
924 else if (aFeatureKind == SketchPlugin_Arc::ID())
925 return middlePointOnArc(aFeature);
927 // do not move other types of features
928 return std::shared_ptr<GeomAPI_Pnt2d>();
931 void SketchAPI_Sketch::move(const ModelHighAPI_RefAttr& theMovedEntity,
932 const std::shared_ptr<GeomAPI_Pnt2d>& theTargetPoint)
934 std::shared_ptr<ModelAPI_ObjectMovedMessage> aMessage(new ModelAPI_ObjectMovedMessage);
935 theMovedEntity.fillMessage(aMessage);
937 std::shared_ptr<GeomAPI_Pnt2d> anOriginalPosition;
938 if (aMessage->movedAttribute())
939 anOriginalPosition = pointCoordinates(aMessage->movedAttribute());
941 anOriginalPosition = middlePoint(aMessage->movedObject());
943 if (!anOriginalPosition)
944 return; // something has gone wrong, do not process movement
946 aMessage->setOriginalPosition(anOriginalPosition);
947 aMessage->setCurrentPosition(theTargetPoint);
948 Events_Loop::loop()->send(aMessage);
951 void SketchAPI_Sketch::move(const ModelHighAPI_RefAttr& theMovedEntity,
952 double theTargetX, double theTargetY)
954 std::shared_ptr<GeomAPI_Pnt2d> aTargetPoint(new GeomAPI_Pnt2d(theTargetX, theTargetY));
955 move(theMovedEntity, aTargetPoint);
958 //--------------------------------------------------------------------------------------
960 std::shared_ptr<GeomAPI_Pnt2d> SketchAPI_Sketch::to2D(const std::shared_ptr<GeomAPI_Pnt>& thePoint)
962 FeaturePtr aBase = feature();
963 std::shared_ptr<GeomDataAPI_Point> aC = std::dynamic_pointer_cast<GeomDataAPI_Point>(
964 aBase->attribute(SketchPlugin_Sketch::ORIGIN_ID()));
965 std::shared_ptr<GeomDataAPI_Dir> aNorm = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
966 aBase->attribute(SketchPlugin_Sketch::NORM_ID()));
967 std::shared_ptr<GeomDataAPI_Dir> aX = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
968 aBase->attribute(SketchPlugin_Sketch::DIRX_ID()));
969 std::shared_ptr<GeomAPI_Dir> aY(new GeomAPI_Dir(aNorm->dir()->cross(aX->dir())));
971 return thePoint->to2D(aC->pnt(), aX->dir(), aY);
974 //--------------------------------------------------------------------------------------
976 void SketchAPI_Sketch::dump(ModelHighAPI_Dumper& theDumper) const
978 FeaturePtr aBase = feature();
979 const std::string& aDocName = theDumper.name(aBase->document());
981 AttributeSelectionPtr anExternal = aBase->selection(SketchPlugin_SketchEntity::EXTERNAL_ID());
982 if (anExternal->value()) {
983 theDumper << aBase << " = model.addSketch(" << aDocName <<
984 ", " << anExternal << ")" << std::endl;
986 // Sketch is base on a plane.
987 std::shared_ptr<GeomAPI_Pnt> anOrigin = std::dynamic_pointer_cast<GeomDataAPI_Point>(
988 aBase->attribute(SketchPlugin_Sketch::ORIGIN_ID()))->pnt();
989 std::shared_ptr<GeomAPI_Dir> aNormal = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
990 aBase->attribute(SketchPlugin_Sketch::NORM_ID()))->dir();
991 std::shared_ptr<GeomAPI_Dir> aDirX = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
992 aBase->attribute(SketchPlugin_Sketch::DIRX_ID()))->dir();
994 // Check the plane is coordinate plane
995 std::string aPlaneName = defaultPlane(anOrigin, aNormal, aDirX);
996 if(anExternal->context()) { // checking for selected planes
997 if (!aPlaneName.empty()
998 && anExternal->context()->data()
999 && anExternal->context()->data()->name() == aPlaneName) {
1000 // dump sketch based on coordinate plane
1001 theDumper << aBase << " = model.addSketch(" << aDocName
1002 << ", model.standardPlane(\"" << aPlaneName << "\"))" << std::endl;
1003 } else { // some other plane
1004 theDumper << aBase << " = model.addSketch(" << aDocName <<
1005 ", " << anExternal<< ")" << std::endl;
1008 if (aPlaneName.empty()) {
1009 // needs import additional module
1010 theDumper.importModule("GeomAPI");
1011 // dump plane parameters
1012 const std::string& aSketchName = theDumper.name(aBase);
1013 std::string anOriginName = aSketchName + "_origin";
1014 std::string aNormalName = aSketchName + "_norm";
1015 std::string aDirXName = aSketchName + "_dirx";
1016 // use "\n" instead of std::endl to avoid automatic dumping sketch here
1017 // and then dumplicate dumping it in the next line
1018 theDumper << anOriginName << " = " << anOrigin << "\n"
1019 << aNormalName << " = " << aNormal << "\n"
1020 << aDirXName << " = " << aDirX << "\n";
1021 // dump sketch based on arbitrary plane
1022 theDumper << aBase << " = model.addSketch(" << aDocName << ", GeomAPI_Ax3("
1023 << anOriginName << ", " << aDirXName << ", " << aNormalName << "))" << std::endl;
1025 // dump sketch based on coordinate plane
1026 theDumper << aBase << " = model.addSketch(" << aDocName
1027 << ", model.defaultPlane(\"" << aPlaneName << "\"))" << std::endl;
1032 // dump sketch's subfeatures
1033 CompositeFeaturePtr aCompFeat = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(aBase);
1034 theDumper.processSubs(aCompFeat, true);