1 // Copyright (C) 2014-2019 CEA/DEN, EDF R&D
3 // This library is free software; you can redistribute it and/or
4 // modify it under the terms of the GNU Lesser General Public
5 // License as published by the Free Software Foundation; either
6 // version 2.1 of the License, or (at your option) any later version.
8 // This library is distributed in the hope that it will be useful,
9 // but WITHOUT ANY WARRANTY; without even the implied warranty of
10 // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
11 // Lesser General Public License for more details.
13 // You should have received a copy of the GNU Lesser General Public
14 // License along with this library; if not, write to the Free Software
15 // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
17 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
20 #include "PartSet_WidgetSketchLabel.h"
21 #include "PartSet_Tools.h"
22 #include "PartSet_Module.h"
23 #include "PartSet_PreviewPlanes.h"
25 #include "SketchPlugin_SketchEntity.h"
27 #include <XGUI_ActionsMgr.h>
28 #include <XGUI_Displayer.h>
29 #include <XGUI_ModuleConnector.h>
30 #include <XGUI_SelectionActivate.h>
31 #include <XGUI_Selection.h>
32 #include <XGUI_SelectionMgr.h>
33 #include <XGUI_Tools.h>
34 #include <XGUI_ViewerProxy.h>
35 #include <XGUI_Workshop.h>
37 #include <ModelAPI_ResultBody.h>
38 #include <ModelAPI_Tools.h>
40 #include <ModuleBase_Operation.h>
41 #include <ModuleBase_ViewerPrs.h>
42 #include <ModuleBase_Tools.h>
43 #include <ModuleBase_IModule.h>
44 #include <ModuleBase_IPropertyPanel.h>
46 #include <GeomAlgoAPI_FaceBuilder.h>
47 #include <GeomAlgoAPI_ShapeTools.h>
48 #include <GeomDataAPI_Point.h>
49 #include <GeomDataAPI_Dir.h>
50 #include <GeomAPI_XYZ.h>
51 #include <GeomAPI_Face.h>
52 #include <GeomAPI_Edge.h>
53 #include <GeomAPI_ShapeExplorer.h>
55 #include <SketchPlugin_Sketch.h>
56 #include <SketcherPrs_Tools.h>
58 #include <Precision.hxx>
62 #include <AIS_Shape.hxx>
63 #include <AIS_DimensionSelectionMode.hxx>
64 #include <Bnd_Box.hxx>
66 #include <Config_WidgetAPI.h>
67 #include <Config_PropManager.h>
70 #include <QApplication>
71 #include <QVBoxLayout>
72 #include <QHBoxLayout>
75 #include <QPushButton>
76 #include <QStackedWidget>
78 #include <QDoubleValidator>
81 #define DBL_MAX 1.7976931348623158e+308
84 PartSet_WidgetSketchLabel::PartSet_WidgetSketchLabel(QWidget* theParent,
85 ModuleBase_IWorkshop* theWorkshop,
86 const Config_WidgetAPI* theData,
87 const QMap<PartSet_Tools::ConstraintVisibleState, bool>& toShowConstraints)
88 : ModuleBase_WidgetValidated(theParent, theWorkshop, theData), myOpenTransaction(false)
90 QVBoxLayout* aLayout = new QVBoxLayout(this);
91 ModuleBase_Tools::zeroMargins(aLayout);
93 myStackWidget = new QStackedWidget(this);
94 myStackWidget->setContentsMargins(0,0,0,0);
95 aLayout->addWidget(myStackWidget);
97 // Define label for plane selection
98 QWidget* aFirstWgt = new QWidget(this);
100 // Size of the View control
101 mySizeOfViewWidget = new QWidget(aFirstWgt);
102 QHBoxLayout* aSizeLayout = new QHBoxLayout(mySizeOfViewWidget);
103 aSizeLayout->addWidget(new QLabel("Size of the view", mySizeOfViewWidget));
104 mySizeOfView = new QLineEdit(mySizeOfViewWidget);
106 QDoubleValidator* aValidator = new QDoubleValidator(0, DBL_MAX, 12, mySizeOfView);
107 aValidator->setLocale(ModuleBase_Tools::doubleLocale());
108 aValidator->setNotation(QDoubleValidator::StandardNotation);
109 mySizeOfView->setValidator(aValidator);
110 aSizeLayout->addWidget(mySizeOfView);
112 QString aText = QString::fromStdString(theData->getProperty("title"));
113 QLabel* aLabel = new QLabel(aText, aFirstWgt);
114 aLabel->setWordWrap(true);
115 QString aTooltip = QString::fromStdString(theData->getProperty("tooltip"));
116 aLabel->setToolTip(aTooltip);
117 aLabel->setIndent(5);
119 aLayout = new QVBoxLayout(aFirstWgt);
120 ModuleBase_Tools::zeroMargins(aLayout);
121 aLayout->addWidget(mySizeOfViewWidget);
122 aLayout->addWidget(aLabel);
123 aLayout->addStretch(1);
125 myStackWidget->addWidget(aFirstWgt);
127 // Define widget for sketch manmagement
128 QWidget* aSecondWgt = new QWidget(this);
129 aLayout = new QVBoxLayout(aSecondWgt);
130 ModuleBase_Tools::zeroMargins(aLayout);
132 QGroupBox* aViewBox = new QGroupBox(tr("Sketcher plane"), this);
133 QVBoxLayout* aViewLayout = new QVBoxLayout(aViewBox);
135 myViewInverted = new QCheckBox(tr("Reversed"), aViewBox);
136 aViewLayout->addWidget(myViewInverted);
138 QPushButton* aSetViewBtn =
139 new QPushButton(QIcon(":icons/plane_view.png"), tr("Set plane view"), aViewBox);
140 connect(aSetViewBtn, SIGNAL(clicked(bool)), this, SLOT(onSetPlaneView()));
141 aViewLayout->addWidget(aSetViewBtn);
143 aLayout->addWidget(aViewBox);
145 QMap<PartSet_Tools::ConstraintVisibleState, QString> aStates;
146 aStates[PartSet_Tools::Geometrical] = tr("Show geometrical constraints");
147 aStates[PartSet_Tools::Dimensional] = tr("Show dimensional constraints");
148 aStates[PartSet_Tools::Expressions] = tr("Show existing expressions");
150 QMap<PartSet_Tools::ConstraintVisibleState, QString>::const_iterator anIt = aStates.begin(),
151 aLast = aStates.end();
152 for (; anIt != aLast; anIt++) {
153 QCheckBox* aShowConstraints = new QCheckBox(anIt.value(), this);
154 connect(aShowConstraints, SIGNAL(toggled(bool)), this, SLOT(onShowConstraint(bool)));
155 aLayout->addWidget(aShowConstraints);
157 PartSet_Tools::ConstraintVisibleState aState = anIt.key();
158 myShowConstraints[aState] = aShowConstraints;
160 if (toShowConstraints.contains(aState))
161 aShowConstraints->setChecked(toShowConstraints[aState]);
165 QPushButton* aPlaneBtn = new QPushButton(tr("Change sketch plane"), aSecondWgt);
166 connect(aPlaneBtn, SIGNAL(clicked(bool)), SLOT(onChangePlane()));
167 aLayout->addWidget(aPlaneBtn);
169 myStackWidget->addWidget(aSecondWgt);
170 //setLayout(aLayout);
172 myPreviewPlanes = new PartSet_PreviewPlanes();
175 PartSet_WidgetSketchLabel::~PartSet_WidgetSketchLabel()
179 bool PartSet_WidgetSketchLabel::setSelection(QList<ModuleBase_ViewerPrsPtr>& theValues,
180 const bool theToValidate)
182 // do not use the given selection if the plane of the sketch has been already set.
183 // If this check is absent, a selected plane in the viewer can be set in the sketch
184 // even if the sketch is built on another plane.
188 ModuleBase_ViewerPrsPtr aPrs = theValues.first();
189 bool aDone = setSelectionInternal(theValues, theToValidate);
191 updateByPlaneSelected(aPrs);
195 QList<QWidget*> PartSet_WidgetSketchLabel::getControls() const
197 QList<QWidget*> aResult;
198 aResult << myStackWidget;
202 bool PartSet_WidgetSketchLabel::processSelection()
204 std::shared_ptr<GeomAPI_Pln> aPlane = plane();
208 QList<ModuleBase_ViewerPrsPtr> aSelected = getFilteredSelected();
210 if (aSelected.empty())
212 ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
213 bool aDone = setSelectionInternal(aSelected, false);
215 updateByPlaneSelected(aPrs);
216 updateObject(myFeature);
222 void PartSet_WidgetSketchLabel::onShowConstraint(bool theOn)
224 QCheckBox* aSenderCheckBox = qobject_cast<QCheckBox*>(sender());
226 QMap<PartSet_Tools::ConstraintVisibleState, QCheckBox*>::const_iterator
227 anIt = myShowConstraints.begin(), aLast = myShowConstraints.end();
229 PartSet_Tools::ConstraintVisibleState aState = PartSet_Tools::Geometrical;
231 for (; anIt != aLast && !aFound; anIt++) {
232 aFound = anIt.value() == aSenderCheckBox;
237 emit showConstraintToggled(aState, theOn);
240 void PartSet_WidgetSketchLabel::blockAttribute(const AttributePtr& theAttribute,
241 const bool& theToBlock, bool& isFlushesActived,
242 bool& isAttributeSetInitializedBlocked,
243 bool& isAttributeSendUpdatedBlocked)
245 ModuleBase_WidgetValidated::blockAttribute(theAttribute, theToBlock, isFlushesActived,
246 isAttributeSetInitializedBlocked,
247 isAttributeSendUpdatedBlocked);
248 // We do not restore the previous state of isAttributeSetInitializedBlocked for each of
249 // attributes. It it is necessary, these states should be append to the method attributes
250 // or stored in the widget
252 std::list<AttributePtr> anAttributes = myFeature->data()->attributes("");
253 std::list<AttributePtr>::const_iterator anIt = anAttributes.begin(), aLast = anAttributes.end();
255 for(; anIt != aLast; anIt++) {
256 AttributePtr anAttribute = *anIt;
258 anAttribute->blockSetInitialized(true);
260 anAttribute->blockSetInitialized(isAttributeSetInitializedBlocked);
264 bool PartSet_WidgetSketchLabel::setSelectionInternal(
265 const QList<ModuleBase_ViewerPrsPtr>& theValues,
266 const bool theToValidate)
269 if (theValues.empty()) {
270 // In order to make reselection possible, set empty object and shape should be done
271 setSelectionCustom(std::shared_ptr<ModuleBase_ViewerPrs>(
272 new ModuleBase_ViewerPrs(ObjectPtr(), GeomShapePtr(), NULL)));
276 // it removes the processed value from the parameters list
277 ModuleBase_ViewerPrsPtr aValue = theValues.first();//.takeFirst();
278 if (!theToValidate || isValidInFilters(aValue))
279 aDone = setSelectionCustom(aValue);
285 void PartSet_WidgetSketchLabel::updateByPlaneSelected(const ModuleBase_ViewerPrsPtr& thePrs)
287 GeomPlanePtr aPlane = plane();
290 // 1. hide main planes if they have been displayed and display sketch preview plane
291 myPreviewPlanes->erasePreviewPlanes(myWorkshop);
293 PartSet_Module* aModule = dynamic_cast<PartSet_Module*>(myWorkshop->module());
295 CompositeFeaturePtr aSketch = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(myFeature);
296 bool isSetSizeOfView = false;
297 double aSizeOfView = 0;
298 QString aSizeOfViewStr = mySizeOfView->text();
299 if (!aSizeOfViewStr.isEmpty()) {
300 aSizeOfView = aSizeOfViewStr.toDouble(&isSetSizeOfView);
301 if (isSetSizeOfView && aSizeOfView <= 0) {
302 isSetSizeOfView = false;
306 aModule->sketchMgr()->previewSketchPlane()->setSizeOfView(aSizeOfView, true);
307 aModule->sketchMgr()->previewSketchPlane()->createSketchPlane(aSketch, myWorkshop);
309 aModule->sketchMgr()->previewSketchPlane()->setSizeOfView(aSizeOfView, false);
311 // 2. if the planes were displayed, change the view projection
313 std::shared_ptr<GeomAPI_Dir> aDir = aPlane->direction();
314 gp_XYZ aXYZ = aDir->impl<gp_Dir>().XYZ();
317 // Rotate view if the sketcher plane is selected only from preview planes
318 // Preview planes are created only if there is no any shape
319 bool aRotate = Config_PropManager::boolean(SKETCH_TAB_NAME, "rotate_to_plane");
321 myWorkshop->viewer()->setViewProjection(aXYZ.X(), aXYZ.Y(), aXYZ.Z(), aTwist);
323 QString aSizeOfViewStr = mySizeOfView->text();
324 if (!aSizeOfViewStr.isEmpty()) {
326 double aSizeOfView = aSizeOfViewStr.toDouble(&isOk);
327 if (isOk && aSizeOfView > 0) {
328 Handle(V3d_View) aView3d = myWorkshop->viewer()->activeView();
329 if (!aView3d.IsNull()) {
331 double aHalfSize = aSizeOfView/2.0;
332 aBndBox.Update(-aHalfSize, -aHalfSize, -aHalfSize, aHalfSize, aHalfSize, aHalfSize);
333 aView3d->FitAll(aBndBox, 0.01, false);
338 aModule->onViewTransformed();
340 if (myOpenTransaction) {
341 SessionPtr aMgr = ModelAPI_Session::get();
342 aMgr->finishOperation();
343 myOpenTransaction = false;
345 // 3. Clear text in the label
346 myStackWidget->setCurrentIndex(1);
347 //myLabel->setText("");
348 //myLabel->setToolTip("");
349 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(myWorkshop);
351 // 5. Clear selection mode and define sketching mode
352 emit planeSelected(plane());
353 // after the plane is selected in the sketch, the sketch selection should be activated
354 // it can not be performed in the sketch label widget because, we don't need to switch off
355 // the selection by any label deactivation, but need to switch it off by stop the sketch
356 myWorkshop->selectionActivate()->updateSelectionFilters();
357 myWorkshop->selectionActivate()->updateSelectionModes();
359 // 6. Update sketcher actions
360 XGUI_ActionsMgr* anActMgr = aWorkshop->actionsMgr();
362 myWorkshop->updateCommandStatus();
363 aWorkshop->selector()->clearSelection();
364 myWorkshop->viewer()->update();
367 std::shared_ptr<GeomAPI_Pln> PartSet_WidgetSketchLabel::plane() const
369 CompositeFeaturePtr aSketch = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(myFeature);
370 return PartSet_Tools::sketchPlane(aSketch);
373 bool PartSet_WidgetSketchLabel::focusTo()
375 ModuleBase_Tools::setFocus(myStackWidget, "PartSet_WidgetSketchLabel::focusTo()");
379 void PartSet_WidgetSketchLabel::enableFocusProcessing()
381 myStackWidget->installEventFilter(this);
384 void PartSet_WidgetSketchLabel::storeAttributeValue(const AttributePtr& theAttribute)
386 ModuleBase_WidgetValidated::storeAttributeValue(theAttribute);
389 void PartSet_WidgetSketchLabel::restoreAttributeValue(const AttributePtr& theAttribute,
392 ModuleBase_WidgetValidated::restoreAttributeValue(theAttribute, theValid);
394 // it is not necessary to save the previous plane value because the plane is chosen once
395 DataPtr aData = feature()->data();
396 AttributeSelectionPtr aSelAttr = std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
397 (aData->attribute(SketchPlugin_SketchEntity::EXTERNAL_ID()));
399 ResultPtr anEmptyResult;
400 GeomShapePtr anEmptyShape;
401 aSelAttr->setValue(anEmptyResult, anEmptyShape);
405 bool PartSet_WidgetSketchLabel::setSelectionCustom(const ModuleBase_ViewerPrsPtr& thePrs)
407 return fillSketchPlaneBySelection(thePrs);
410 bool PartSet_WidgetSketchLabel::canFillSketch(const ModuleBase_ViewerPrsPtr& thePrs)
412 bool aCanFillSketch = true;
413 // avoid any selection on sketch object
414 ObjectPtr anObject = thePrs->object();
415 ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObject);
417 FeaturePtr aFeature = ModelAPI_Feature::feature(aResult);
418 if (aFeature->getKind() == SketchPlugin_Sketch::ID())
419 aCanFillSketch = false;
421 // check plane or planar face of any non-sketch object
422 if (aCanFillSketch) {
423 std::shared_ptr<GeomAPI_Face> aGeomFace;
425 GeomShapePtr aGeomShape = thePrs->shape();
426 if ((!aGeomShape.get() || aGeomShape->isNull()) && aResult.get()) {
427 aGeomShape = aResult->shape();
430 if (aGeomShape.get() && aGeomShape->shapeType() == GeomAPI_Shape::FACE) {
431 std::shared_ptr<GeomAPI_Face> aGeomFace(new GeomAPI_Face(aGeomShape));
432 aCanFillSketch = aGeomFace.get() && aGeomFace->isPlanar();
435 aCanFillSketch = false;
437 return aCanFillSketch;
440 bool PartSet_WidgetSketchLabel::fillSketchPlaneBySelection(const ModuleBase_ViewerPrsPtr& thePrs)
442 bool isOwnerSet = false;
444 const GeomShapePtr& aShape = thePrs->shape();
445 std::shared_ptr<GeomAPI_Dir> aDir;
447 if (aShape.get() && !aShape->isNull()) {
448 const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
449 aDir = setSketchPlane(aTDShape);
450 isOwnerSet = aDir.get();
452 if (thePrs->object() && (feature() != thePrs->object())) {
453 FeaturePtr aFeature = ModelAPI_Feature::feature(thePrs->object());
454 DataPtr aData = feature()->data();
455 AttributeSelectionPtr aSelAttr =
456 std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
457 (aData->attribute(SketchPlugin_SketchEntity::EXTERNAL_ID()));
458 if (aSelAttr.get()) {
459 ResultPtr aRes = std::dynamic_pointer_cast<ModelAPI_Result>(thePrs->object());
461 GeomShapePtr aShapePtr;
462 if (!aShape.get() || aShape->isNull()) { // selection happens in the OCC viewer
463 aShapePtr = ModelAPI_Tools::shape(aRes);
465 else { // selection happens in OB browser
468 if (aShapePtr.get() && aShapePtr->isFace()) {
469 const TopoDS_Shape& aTDShape = aShapePtr->impl<TopoDS_Shape>();
470 setSketchPlane(aTDShape);
471 aSelAttr->setValue(aRes, aShapePtr);
476 aSelAttr->setValue(aFeature, GeomShapePtr());
477 GeomShapePtr aShape = aSelAttr->value();
478 if (!aShape.get() && aSelAttr->contextFeature().get() &&
479 aSelAttr->contextFeature()->firstResult().get()) {
480 aShape = aSelAttr->contextFeature()->firstResult()->shape();
482 if (aShape.get() && aShape->isPlanar()) {
483 const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
484 setSketchPlane(aTDShape);
493 void PartSet_WidgetSketchLabel::activateCustom()
495 std::shared_ptr<GeomAPI_Pln> aPlane = plane();
497 myStackWidget->setCurrentIndex(1);
501 myStackWidget->setCurrentIndex(0);
502 bool aBodyIsVisualized = myPreviewPlanes->hasVisualizedBodies(myWorkshop);
504 // Clear previous selection mode It is necessary for correct activation of preview planes
505 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(myWorkshop);
506 XGUI_Displayer* aDisp = aWorkshop->displayer();
507 aWorkshop->selectionActivate()->activateObjects(QIntList(), aDisp->displayedObjects(), false);
509 if (!aBodyIsVisualized) {
510 // We have to select a plane before any operation
511 myPreviewPlanes->showPreviewPlanes(myWorkshop);
512 mySizeOfViewWidget->setVisible(true);
515 mySizeOfViewWidget->setVisible(false);
518 void PartSet_WidgetSketchLabel::deactivate()
520 ModuleBase_WidgetValidated::deactivate();
521 bool aHidePreview = myPreviewPlanes->isPreviewDisplayed();
522 myPreviewPlanes->erasePreviewPlanes(myWorkshop);
525 myWorkshop->viewer()->update();
528 void PartSet_WidgetSketchLabel::selectionModes(int& theModuleSelectionModes, QIntList& theModes)
530 theModuleSelectionModes = -1;
531 std::shared_ptr<GeomAPI_Pln> aPlane = plane();
533 theModes << TopAbs_FACE;
536 void PartSet_WidgetSketchLabel::selectionFilters(QIntList& theModuleSelectionFilters,
537 SelectMgr_ListOfFilter& theSelectionFilters)
539 std::shared_ptr<GeomAPI_Pln> aPlane = plane();
542 return ModuleBase_WidgetValidated::selectionFilters(theModuleSelectionFilters,
543 theSelectionFilters);
546 std::shared_ptr<GeomAPI_Dir>
547 PartSet_WidgetSketchLabel::setSketchPlane(const TopoDS_Shape& theShape)
549 if (theShape.IsNull())
550 return std::shared_ptr<GeomAPI_Dir>();
552 // get selected shape
553 std::shared_ptr<GeomAPI_Shape> aGShape(new GeomAPI_Shape);
554 aGShape->setImpl(new TopoDS_Shape(theShape));
556 // get plane parameters
557 std::shared_ptr<GeomAPI_Face> aFace(new GeomAPI_Face(aGShape));
558 std::shared_ptr<GeomAPI_Pln> aPlane = aFace->getPlane();
560 return std::shared_ptr<GeomAPI_Dir>();
561 return setSketchPlane(aPlane);
564 std::shared_ptr<GeomAPI_Dir>
565 PartSet_WidgetSketchLabel::setSketchPlane(std::shared_ptr<GeomAPI_Pln> thePlane)
567 // set plane parameters to feature
568 std::shared_ptr<ModelAPI_Data> aData = feature()->data();
569 double anA, aB, aC, aD;
570 thePlane->coefficients(anA, aB, aC, aD);
572 // calculate attributes of the sketch
573 std::shared_ptr<GeomAPI_Dir> aNormDir(new GeomAPI_Dir(anA, aB, aC));
574 std::shared_ptr<GeomAPI_XYZ> aCoords = aNormDir->xyz();
575 std::shared_ptr<GeomAPI_XYZ> aZero(new GeomAPI_XYZ(0, 0, 0));
576 aCoords = aCoords->multiplied(-aD * aCoords->distance(aZero));
577 std::shared_ptr<GeomAPI_Pnt> anOrigPnt(new GeomAPI_Pnt(aCoords));
578 // X axis is preferable to be dirX on the sketch
579 const double tol = Precision::Confusion();
580 bool isX = fabs(fabs(anA) - 1.0) < tol && fabs(aB) < tol && fabs(aC) < tol;
581 std::shared_ptr<GeomAPI_Dir> aTempDir(
582 isX ? new GeomAPI_Dir(0, 1, 0) : new GeomAPI_Dir(1, 0, 0));
583 std::shared_ptr<GeomAPI_Dir> aYDir(new GeomAPI_Dir(aNormDir->cross(aTempDir)));
584 std::shared_ptr<GeomAPI_Dir> aXDir(new GeomAPI_Dir(aYDir->cross(aNormDir)));
586 std::shared_ptr<GeomDataAPI_Point> anOrigin = std::dynamic_pointer_cast<GeomDataAPI_Point>(
587 aData->attribute(SketchPlugin_Sketch::ORIGIN_ID()));
588 anOrigin->setValue(anOrigPnt);
589 std::shared_ptr<GeomDataAPI_Dir> aNormal = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
590 aData->attribute(SketchPlugin_Sketch::NORM_ID()));
591 aNormal->setValue(aNormDir);
592 std::shared_ptr<GeomDataAPI_Dir> aDirX = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
593 aData->attribute(SketchPlugin_Sketch::DIRX_ID()));
594 aDirX->setValue(aXDir);
595 std::shared_ptr<GeomAPI_Dir> aDir = thePlane->direction();
599 void PartSet_WidgetSketchLabel::onSetPlaneView()
601 std::shared_ptr<GeomAPI_Pln> aPlane = plane();
603 std::shared_ptr<GeomAPI_Dir> aDirection = aPlane->direction();
604 gp_Dir aDir = aDirection->impl<gp_Dir>();
605 if (myViewInverted->isChecked())
607 myWorkshop->viewer()->setViewProjection(aDir.X(), aDir.Y(), aDir.Z(), 0.);
608 PartSet_Module* aModule = dynamic_cast<PartSet_Module*>(myWorkshop->module());
610 aModule->onViewTransformed();
615 //******************************************************
616 QList<std::shared_ptr<ModuleBase_ViewerPrs>> PartSet_WidgetSketchLabel::findCircularEdgesInPlane()
618 QList<std::shared_ptr<ModuleBase_ViewerPrs>> aResult;
619 XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(myWorkshop);
620 XGUI_Displayer* aDisplayer = aWorkshop->displayer();
621 QObjectPtrList aDispObjects = aDisplayer->displayedObjects();
623 std::shared_ptr<GeomAPI_Pln> aPlane = plane();
624 foreach(ObjectPtr aObj, aDispObjects) {
625 ResultPtr aResObj = std::dynamic_pointer_cast<ModelAPI_Result>(aObj);
627 GeomShapePtr aShape = aResObj->shape();
629 GeomAPI_ShapeExplorer aExplorer(aShape, GeomAPI_Shape::EDGE);
630 for(; aExplorer.more(); aExplorer.next()) {
631 GeomShapePtr aEdgeShape = aExplorer.current();
632 GeomAPI_Edge anEdge(aEdgeShape);
633 if ((anEdge.isCircle() || anEdge.isArc() || anEdge.isEllipse()) &&
634 anEdge.isInPlane(aPlane)) {
635 bool isContains = false;
636 // Check that edge is not used.
637 // It is possible that the same edge will be taken from different faces
638 foreach(std::shared_ptr<ModuleBase_ViewerPrs> aPrs, aResult) {
639 GeomAPI_Edge aUsedEdge(aPrs->shape());
640 if (aUsedEdge.isEqual(aEdgeShape)) {
646 std::shared_ptr<ModuleBase_ViewerPrs>
647 aPrs(new ModuleBase_ViewerPrs(aResObj, aEdgeShape));
648 aResult.append(aPrs);
658 //******************************************************
659 void PartSet_WidgetSketchLabel::onChangePlane()
661 PartSet_Module* aModule = dynamic_cast<PartSet_Module*>(myWorkshop->module());
663 mySizeOfViewWidget->setVisible(false);
664 myStackWidget->setCurrentIndex(0);
666 CompositeFeaturePtr aSketch = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(myFeature);
667 PartSet_Tools::nullifySketchPlane(aSketch);
669 Handle(SelectMgr_Filter) aFilter = aModule->selectionFilter(SF_SketchPlaneFilter);
670 if (!aFilter.IsNull()) {
671 std::shared_ptr<GeomAPI_Pln> aPln;
672 Handle(ModuleBase_ShapeInPlaneFilter)::DownCast(aFilter)->setPlane(aPln);
674 XGUI_Workshop* aWorkshop = aModule->getWorkshop();
676 aWorkshop->selectionActivate()->updateSelectionFilters();
677 aWorkshop->selectionActivate()->updateSelectionModes();
679 SessionPtr aMgr = ModelAPI_Session::get();
680 aMgr->startOperation();
681 myOpenTransaction = true;